summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-03ASoC: AMD: Always stop ch2 firstDaniel Kurtz
Commit 6b116dfb4633a ("ASoC: AMD: make channel 1 dma as circular") made both channels circular, so this comment and logic no longer applies. Always stop ch2 (the channel closest to the output) before ch1. This ensures that the downstream circular DMA channel does not continue to play/capture repeated samples after the upstream circular DMA channel has already stopped. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: pxa-ssp: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: es7241: add es7241 codec supportJerome Brunet
Add support for the everest es7241 which is a simple 2 channels analog to digital converter. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: es7241: add dt-bindings documentation for the es7241 adcJerome Brunet
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-03ASoC: rt5682: add button detection mode controlBard Liao
We are currently using power saving mode for button detection. However, it will impact the headset recording performance. This patch will switch button detection to normal mode in capture and switch to power saving mode in the end of capture. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: es7134: Add VDD and AVDD power suppliesJerome Brunet
Add the VDD and AVDD power supplies to the DAPM graph as some board may need to enable a regulator to turn them on. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: es7134: check if mclk rate is validJerome Brunet
For each supported sample rate, the es7134 can work with several mclk / sample rate ratio. Check if ratio we get is actually OK. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: es7134: remove 64kHz rate from the supported ratesJerome Brunet
64Khz is actually not supported by the es7134 according to the datasheet Fixes: 9000b59d7a12 ("ASoC: es7134: add es7134 DAC driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: pxa-ssp: remove .set_pll() and .set_clkdiv() callbacksDaniel Mack
The .set_pll() and .set_clkdiv() callbacks are considered legacy and should not be used anymore. In order to support PXA boards on DT platforms, remove them and let the code figure out the correct dividers and PLL base frequencies itself. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: pxa: select SND_PXA2XX_LIB for drivers that depend on itDaniel Mack
Commit d767d3ce5c48b ("ASoC: pxa: provide PCM ops for ssp, i2s and ac97 components") created a build-time dependency to SND_PXA2XX_LIB but missed to reflect that in Kconfig. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: ac97: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-generic-dmaengine-pcm: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-compress: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-topology: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-dapm: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-core: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-acpi: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-devres.c: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-utils.c: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-jack.c: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-dpcm.h: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-pcm.c: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-ops.c: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-dai.h: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: soc-io.c: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: audio-graph-scu-card.c: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: audio-graph-card.c: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: simple-scu-card.c: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: simple-card-utils: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-02ASoC: simple-card: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: mt6797: sub dai use list_headKaiChieh Chuang
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: mediatek: sub dai use list_headKaiChieh Chuang
use list_head for sub_dais, since original sub_dais array is sparsely occupied Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa: make SND_PXA2XX_SOC_I2S selectableDaniel Mack
Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa: remove bindings from pxa2xx-pcmDaniel Mack
This platform is no longer needed on DT boards, so let's remove them to avoid confusion. DT bindings should use the CPU DAIs (I2S/SSP/AC97) directly. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa: provide PCM ops for ssp, i2s and ac97 componentsDaniel Mack
Now that the functions are now available through pxa2xx-lib, hook them up to pxa-sspi, pxa-ac97 and pxa-i2s. This allows DT platforms to use the DAIs without a platform driver. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa2xx-pcm-lib: fix indentingDaniel Mack
While at it, also fix some indenting. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa: move some functions to pxa2xx-libDaniel Mack
To get rid of some intermediate platform layers, move pxa2xx_soc_pcm_new() and pxa2xx_pcm_ops in pxa2xx-lib. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa: clean up function names in pxa2xx-libDaniel Mack
Clean up the namespace a bit and drop the __ prefix of all functions exported by pxa2xx-lib. This improves the readability of the code. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: fold pxa2xx-pcm into its only user, pxa2xx-ac97Daniel Mack
Now that the PXA SSP bits are ported over to generic DMA, the pxa2xx-pcm code only has a single user left. This patch folds the remaining bits into its only user and removes the unnecessary glue layer along with its header file. The include dependency to linux/dma/pxa-dma.h is also gone now. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29ASoC: pxa: remove the dmaengine compat needRobert Jarzmik
As the pxa architecture switched towards the dmaengine slave map, the old compatibility mechanism to acquire the dma requestor line number and priority are not needed anymore. This patch simplifies the dma resource acquisition, using the more generic function dma_request_slave_channel(). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-28ASoC: dpcm: extend channel merging to the backend cpu daiJerome Brunet
Extend dpcm_merge_chan to also check backend cpu dai channels capabilities. Apply the same policy as soc_pcm_init_runtime_hw() for multicodec links and only check cpu dai in this case. Cc: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-28ASoC: qdsp6: qdafe: fix some off by one bugsDan Carpenter
The > should be >= or we could read one element beyond the end of the port_maps[] array. Fixes: 7fa2d70f9766 ("ASoC: qdsp6: q6afe: Add q6afe driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-28ASoC: dpcm: improve runtime update predictabilityJerome Brunet
As it is, dpcm_runtime_update() performs the old path and new path update of a frontend before going on to the next frontend DAI. Depending the order of the FEs within the rtd list, the result of the update might be different. For example: * Frontend A connected to backend C, with a 48kHz playback * Frontend B connected to backend D, with a 44.1kHz playback * FE A appears before FE B in the rtd list of the card. If we reparent BE C to FE B (disconnecting BE D): * old path update of FE A will run first, and BE C will get hw_free() and shutdown() * new path update of FE B will run after and BE C, which is stopped, so it will be configured at 44.1kHz, as expected If we reparent BE D to FE A (disconnecting BE C): * new path update of FE A will run first but since BE D is still running at 44.1kHz, it won't be reconfigured (no call to startup() or hw_params()) * old path update of FE B runs after, nothing happens * In this case, we end up with a BE playing at 44.1kHz a stream which is supposed to be played at 48Khz (too slow) To improve this situation, this patch performs all the FE old paths update before going on to update the new paths. With this, the result should no longer depend on the order of the FE within the card rtd list. Please note that there might be a small performance penalty since dpcm_process_paths() is called twice per stream direction. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-27ASoC: tas517x: add tas5707 supportJerome Brunet
Add support for the tas5707 audio power amplifier. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-27ASoC: tas571x: add tas5707 compatibleJerome Brunet
Add the tas5707 to the available compatibles of the tas571x driver Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-27ASoC: simple-amplifer: add simple-amplifier compatibleJerome Brunet
Add simple-audio-amplifier to the list of available compatible Suggested-by: Nicolò Veronese <nicveronese@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-27ASoC: simple-amplifier: rename dio2125 to simple-ampliferJerome Brunet
The dio2125 is simple enough that we can make it a generic component. Just rename and sed the dio2125 amplifier driver to simple_amplifier. Suggested-by: Nicolò Veronese <nicveronese@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-27ASoC: simple-amplifier: remame dio2125 documentationJerome Brunet
The dio2125 is simple enough that we can make it a generic component. Rename the the dio2125 documentation to simple-amplifier to prepare this change. Suggested-by: Nicolò Veronese <nicveronese@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-27ASoC: Intel: bytcr_rt5651: Sort DMI table entries alphabeticallyHans de Goede
As we get more entries in the DMI quirk table it is nice to have some sort of ordering in the table, sort it alphabetically. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-27ASoC: Intel: bytcr_rt5651: Add BYT_RT5651_HP_LR_SWAPPED quirkHans de Goede
One some models (Chuwi Vi8 Plus, Chuwi Hi8 Pro) the headphone output has left and right swapped. This can be fixed in with special mixer settings in the UCM profile, bit this requires these devices loading a different UCM profile. This commit adds a BYT_RT5651_HP_LR_SWAPPED quirk for this and postfixes the longname with "-hp-swapped" if set, so that a different UCM profile will be loaded. We can safely do this without causing regressions (UCM profile not found due to the longname change) as the UCM profiles are not in upstream alsa-lib yet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 12:04:16 +0000