| Age | Commit message (Collapse) | Author |
|---|
|
Going to be adding more code here for checking subvol structure.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Repurposing standard error codes in bcachefs code is banned in new code,
and we need to get rid of the remaining ones - private error codes give
us much better error messages.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
WQ_UNBOUND with max_active 1 means ordered workqueue, but we don't
actually need or want ordered semantics - and probably want a higher
concurrency limit anyways.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Need to fix this oversight for the new FS_IOC_(GET|SET)UUID ioctls.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
switch the statfs code from something horrible and open coded to the
more standard uuid_to_fsid()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Files within a subvolume cannot be renamed into another subvolume, but
subvolumes themselves were intended to be.
This implements subvolume renaming - we need to ensure that there's only
a single dirent that points to a subvolume key (not multiple versions in
different snapshots), and we need to ensure that dirent.d_parent_subol
and inode.bi_parent_subvol are updated.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
btree_and_journal_iter is old code that we want to get rid of, but we're
not ready to yet.
lack of btree node prefetching is, it turns out, a real performance
issue for fsck on spinning rust, so - add it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
we now always have a btree_trans when using a btree_and_journal_iter;
prep work for adding prefetching to btree_and_journal_iter
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Recently a severe performance regression was discovered, which bisected
to
a6548c8b5eb5 bcachefs: Avoid flushing the journal in the discard path
It turns out the old behaviour, which issued excessive journal flushes,
worked around a performance issue where queueing delays would cause the
journal to not be able to write quickly enough and stall.
The journal flushes masked the issue because they periodically flushed
the device write cache, reducing write latency for non flushes.
This patch reworks the journalling code to allow more than one
(non-flush) write to be in flight at a time. With this patch, doing 4k
random writes and an iodepth of 128, we are now able to hit 560k iops to
a Samsung 970 EVO Plus - previously, we were stuck in the ~200k range.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prep work for having multiple journal writes in flight.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prep work for having multiple journal writes in flight.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This gives us a way to record the date and time every journal entry was
written - useful for debugging.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Eliminates some error paths - no longer have a hardcoded
BCH_REPLICAS_MAX limit.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Drop an unnecessary bch2_subvolume_get_snapshot() call, and drop the __
from the name - this is a normal interface.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Minor renaming for clarity, bit of refactoring.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Most bcachefs workqueues are used for completions, and should be
WQ_HIGHPRI - this helps reduce queuing delays, we want to complete
quickly once we can no longer signal backpressure by blocking.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
For DT_SUBVOL, we now print both parent and child subvol IDs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, any time we failed to get a journal reservation we'd retry,
with the journal lock held; but this isn't necessary given
wait_event()/wake_up() ordering.
This avoids performance cliffs when the journal starts to get backed up
and lock contention shoots up.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't want journal write completions to be blocked behind btree
transactions - io_complete_wq is used for btree updates after data and
metadata writes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When we are checking whether a subvolume is empty in the specified snapshot,
entries that do not belong to this subvolume should be skipped.
This fixes the following case:
$ bcachefs subvolume create ./sub
$ cd sub
$ bcachefs subvolume create ./sub2
$ bcachefs subvolume snapshot . ./snap
$ ls -a snap
. ..
$ rmdir snap
rmdir: failed to remove 'snap': Directory not empty
As Kent suggested, we pass 0 in may_delete_deleted_inode() to ignore subvols
in the subvol we are checking, because inode.bi_subvol is only set on
subvolume roots, and we can't go through every inode in the subvolume and
change bi_subvol when taking a snapshot. It makes the check less strict, but
that's ok, the rest of fsck will still catch it.
Signed-off-by: Guoyu Ou <benogy@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We were failing to set path->uptodate when reaching the end of a btree
node iterator, causing the new prefetch code for backpointers gc to go
into an infinite loop.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
validate_bset_keys() never properly validated k->u64s; it checked if it
was 0, but not if it was smaller than keys for the given packed format;
this fixes that small oversight.
This patch was backported, so it's adding quite a few error enums so
that they don't get renumbered and we don't have confusing gaps.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't know where the superblock and journal lives on offline devices;
that means if a device is offline fsck can't check those buckets.
Previously, fsck would incorrectly clear bucket data types for those
buckets on offline devices; now we just use the previous state.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When a btree root is unreadable, we still might be able to get some data
back by replaying what's in the journal. Previously though, we got
confused when journal replay would attempt to replay a key for a level
that didn't exist.
This adds bch2_btree_increase_depth(), so that journal replay can handle
this.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
check_inode_deleted_list() returns true if the inode is on the deleted
list; check_inode() was checking the return code incorrectly.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds an option to disable kicking out devices when splitbrain is
detected - it seems there's some issues with splitbrain detection and
we're kicking out devices erronously.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We need to be able to iterate over extent ptrs that may be corrupted in
order to print them - this fixes a bug where we'd pop an assert in
bch2_bkey_durability_safe().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
order
bch2_journal_seq_blacklist_add() was bugged when the new entry
overlapped with multiple existing entries, and it also assumed new
entries are being added in increasing order.
This is true on any sane filesystem, but when trying to recover from
very badly mangled filesystems we might end up with the journal sequence
number rewinding vs. what the blacklist list knows about - easiest to
just handle that here.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
There is a null-ptr-deref issue reported by kasan:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Call Trace:
<TASK>
bch2_fs_alloc+0x1092/0x2170 [bcachefs]
bch2_fs_open+0x683/0xe10 [bcachefs]
...
When initializing the name of bch_fs, it needs to dynamically alloc memory
to meet the length of the name. However, when name allocation failed, it
will cause a null-ptr-deref access exception in subsequent string copy.
Fix this issue by checking if name allocation is successful.
Fixes: 401ec4db6308 ("bcachefs: Printbuf rework")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
|
|
Pull bcachefs fixes from Kent Overstreet:
"Some more mostly boring fixes, but some not
User reported ones:
- the BTREE_ITER_FILTER_SNAPSHOTS one fixes a really nasty
performance bug; user reported an untar initially taking two
seconds and then ~2 minutes
- kill a __GFP_NOFAIL in the buffered read path; this was a leftover
from the trickier fix to kill __GFP_NOFAIL in readahead, where we
can't return errors (and have to silently truncate the read
ourselves).
bcachefs can't use GFP_NOFAIL for folio state unlike iomap based
filesystems because our folio state is just barely too big, 2MB
hugepages cause us to exceed the 2 page threshhold for GFP_NOFAIL.
additionally, the flags argument was just buggy, we weren't
supplying GFP_KERNEL previously (!)"
* tag 'bcachefs-2024-02-25' of https://evilpiepirate.org/git/bcachefs:
bcachefs: fix bch2_save_backtrace()
bcachefs: Fix check_snapshot() memcpy
bcachefs: Fix bch2_journal_flush_device_pins()
bcachefs: fix iov_iter count underflow on sub-block dio read
bcachefs: Fix BTREE_ITER_FILTER_SNAPSHOTS on inodes btree
bcachefs: Kill __GFP_NOFAIL in buffered read path
bcachefs: fix backpointer_to_text() when dev does not exist
|
|
Missed a call in the previous fix.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull two documentation build fixes from Jonathan Corbet:
- The XFS online fsck documentation uses incredibly deeply nested
subsection and list nesting; that broke the PDF docs build. Tweak a
parameter to tell LaTeX to allow the deeper nesting.
- Fix a 6.8 PDF-build regression
* tag 'docs-6.8-fixes3' of git://git.lwn.net/linux:
docs: translations: use attribute to store current language
docs: Instruct LaTeX to cope with deeper nesting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 6.8-rc6 to resolve some reported
problems. These include:
- regression fixes with typec tpcm code as reported by many
- cdnsp and cdns3 driver fixes
- usb role setting code bugfixes
- build fix for uhci driver
- ncm gadget driver bugfix
- MAINTAINERS entry update
All of these have been in linux-next all week with no reported issues
and there is at least one fix in here that is in Thorsten's regression
list that is being tracked"
* tag 'usb-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tpcm: Fix issues with power being removed during reset
MAINTAINERS: Drop myself as maintainer of TYPEC port controller drivers
usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs
Revert "usb: typec: tcpm: reset counter when enter into unattached state after try role"
usb: gadget: omap_udc: fix USB gadget regression on Palm TE
usb: dwc3: gadget: Don't disconnect if not started
usb: cdns3: fix memory double free when handle zero packet
usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()
usb: roles: don't get/set_role() when usb_role_switch is unregistered
usb: roles: fix NULL pointer issue when put module's reference
usb: cdnsp: fixed issue with incorrect detecting CDNSP family controllers
usb: cdnsp: blocked some cdns3 specific code
usb: uhci-grlib: Explicitly include linux/platform_device.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are three small serial/tty driver fixes for 6.8-rc6 that resolve
the following reported errors:
- riscv hvc console driver fix that was reported by many
- amba-pl011 serial driver fix for RS485 mode
- stm32 serial driver fix for RS485 mode
All of these have been in linux-next all week with no reported
problems"
* tag 'tty-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: amba-pl011: Fix DMA transmission in RS485 mode
serial: stm32: do not always set SER_RS485_RX_DURING_TX if RS485 is enabled
tty: hvc: Don't enable the RISC-V SBI console by default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Make sure clearing CPU buffers using VERW happens at the latest
possible point in the return-to-userspace path, otherwise memory
accesses after the VERW execution could cause data to land in CPU
buffers again
* tag 'x86_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM/VMX: Move VERW closer to VMentry for MDS mitigation
KVM/VMX: Use BT+JNC, i.e. EFLAGS.CF to select VMRESUME vs. VMLAUNCH
x86/bugs: Use ALTERNATIVE() instead of mds_user_clear static key
x86/entry_32: Add VERW just before userspace transition
x86/entry_64: Add VERW just before userspace transition
x86/bugs: Add asm helpers for executing VERW
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Make sure GICv4 always gets initialized to prevent a kexec-ed kernel
from silently failing to set it up
- Do not call bus_get_dev_root() for the mbigen irqchip as it always
returns NULL - use NULL directly
- Fix hardware interrupt number truncation when assigning MSI
interrupts
- Correct sending end-of-interrupt messages to disabled interrupts
lines on RISC-V PLIC
* tag 'irq_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Do not assume vPE tables are preallocated
irqchip/mbigen: Don't use bus_get_dev_root() to find the parent
PCI/MSI: Prevent MSI hardware interrupt number truncation
irqchip/sifive-plic: Enable interrupt if needed before EOI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fix from Gao Xiang:
- Fix page refcount leak when looking up specific inodes
introduced by metabuf reworking
* tag 'erofs-for-6.8-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix refcount on the metabuf used for inode lookup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull RCU pathwalk fixes from Al Viro:
"We still have some races in filesystem methods when exposed to RCU
pathwalk. This series is a result of code audit (the second round of
it) and it should deal with most of that stuff.
Still pending: ntfs3 ->d_hash()/->d_compare() and ceph_d_revalidate().
Up to maintainers (a note for NTFS folks - when documentation says
that a method may not block, it *does* imply that blocking allocations
are to be avoided. Really)"
[ More explanations for people who aren't familiar with the vagaries of
RCU path walking: most of it is hidden from filesystems, but if a
filesystem actively participates in the low-level path walking it
needs to make sure the fields involved in that walk are RCU-safe.
That "actively participate in low-level path walking" includes things
like having its own ->d_hash()/->d_compare() routines, or by having
its own directory permission function that doesn't just use the common
helpers. Having a ->d_revalidate() function will also have this issue.
Note that instead of making everything RCU safe you can also choose to
abort the RCU pathwalk if your operation cannot be done safely under
RCU, but that obviously comes with a performance penalty. One common
pattern is to allow the simple cases under RCU, and abort only if you
need to do something more complicated.
So not everything needs to be RCU-safe, and things like the inode etc
that the VFS itself maintains obviously already are. But these fixes
tend to be about properly RCU-delaying things like ->s_fs_info that
are maintained by the filesystem and that got potentially released too
early. - Linus ]
* tag 'pull-fixes.pathwalk-rcu-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ext4_get_link(): fix breakage in RCU mode
cifs_get_link(): bail out in unsafe case
fuse: fix UAF in rcu pathwalks
procfs: make freeing proc_fs_info rcu-delayed
procfs: move dropping pde and pid from ->evict_inode() to ->free_inode()
nfs: fix UAF on pathwalk running into umount
nfs: make nfs_set_verifier() safe for use in RCU pathwalk
afs: fix __afs_break_callback() / afs_drop_open_mmap() race
hfsplus: switch to rcu-delayed unloading of nls and freeing ->s_fs_info
exfat: move freeing sbi, upcase table and dropping nls into rcu-delayed helper
affs: free affs_sb_info with kfree_rcu()
rcu pathwalk: prevent bogus hard errors from may_lookup()
fs/super.c: don't drop ->s_user_ns until we free struct super_block itself
|
|
Pull vfs fixes from Al Viro:
"A couple of fixes - revert of regression from this cycle and a fix for
erofs failure exit breakage (had been there since way back)"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
erofs: fix handling kern_mount() failure
Revert "get rid of DCACHE_GENOCIDE"
|
|
1) errors from ext4_getblk() should not be propagated to caller
unless we are really sure that we would've gotten the same error
in non-RCU pathwalk.
2) we leak buffer_heads if ext4_getblk() is successful, but bh is
not uptodate.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
->d_revalidate() bails out there, anyway. It's not enough
to prevent getting into ->get_link() in RCU mode, but that
could happen only in a very contrieved setup. Not worth
trying to do anything fancy here unless ->d_revalidate()
stops kicking out of RCU mode at least in some cases.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
->permission(), ->get_link() and ->inode_get_acl() might dereference
->s_fs_info (and, in case of ->permission(), ->s_fs_info->fc->user_ns
as well) when called from rcu pathwalk.
Freeing ->s_fs_info->fc is rcu-delayed; we need to make freeing ->s_fs_info
and dropping ->user_ns rcu-delayed too.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
