| Age | Commit message (Collapse) | Author |
|---|
|
makes proc_pid_ns() safe from rcu pathwalk (put_pid_ns()
is still synchronous, but that's not a problem - it does
rcu-delay everything that needs to be)
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
that keeps both around until struct inode is freed, making access
to them safe from rcu-pathwalk
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
NFS ->d_revalidate(), ->permission() and ->get_link() need to access
some parts of nfs_server when called in RCU mode:
server->flags
server->caps
*(server->io_stats)
and, worst of all, call
server->nfs_client->rpc_ops->have_delegation
(the last one - as NFS_PROTO(inode)->have_delegation()). We really
don't want to RCU-delay the entire nfs_free_server() (it would have
to be done with schedule_work() from RCU callback, since it can't
be made to run from interrupt context), but actual freeing of
nfs_server and ->io_stats can be done via call_rcu() just fine.
nfs_client part is handled simply by making nfs_free_client() use
kfree_rcu().
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
nfs_set_verifier() relies upon dentry being pinned; if that's
the case, grabbing ->d_lock stabilizes ->d_parent and guarantees
that ->d_parent points to a positive dentry. For something
we'd run into in RCU mode that is *not* true - dentry might've
been through dentry_kill() just as we grabbed ->d_lock, with
its parent going through the same just as we get to into
nfs_set_verifier_locked(). It might get to detaching inode
(and zeroing ->d_inode) before nfs_set_verifier_locked() gets
to fetching that; we get an oops as the result.
That can happen in nfs{,4} ->d_revalidate(); the call chain in
question is nfs_set_verifier_locked() <- nfs_set_verifier() <-
nfs_lookup_revalidate_delegated() <- nfs{,4}_do_lookup_revalidate().
We have checked that the parent had been positive, but that's
done before we get to nfs_set_verifier() and it's possible for
memory pressure to pick our dentry as eviction candidate by that
time. If that happens, back-to-back attempts to kill dentry and
its parent are quite normal. Sure, in case of eviction we'll
fail the ->d_seq check in the caller, but we need to survive
until we return there...
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
In __afs_break_callback() we might check ->cb_nr_mmap and if it's non-zero
do queue_work(&vnode->cb_work). In afs_drop_open_mmap() we decrement
->cb_nr_mmap and do flush_work(&vnode->cb_work) if it reaches zero.
The trouble is, there's nothing to prevent __afs_break_callback() from
seeing ->cb_nr_mmap before the decrement and do queue_work() after both
the decrement and flush_work(). If that happens, we might be in trouble -
vnode might get freed before the queued work runs.
__afs_break_callback() is always done under ->cb_lock, so let's make
sure that ->cb_nr_mmap can change from non-zero to zero while holding
->cb_lock (the spinlock component of it - it's a seqlock and we don't
need to mess with the counter).
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
->d_hash() and ->d_compare() use those, so we need to delay freeing
them.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
That stuff can be accessed by ->d_hash()/->d_compare(); as it is, we have
a hard-to-hit UAF if rcu pathwalk manages to get into ->d_hash() on a filesystem
that is in process of getting shut down.
Besides, having nls and upcase table cleanup moved from ->put_super() towards
the place where sbi is freed makes for simpler failure exits.
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
one of the flags in it is used by ->d_hash()/->d_compare()
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
If lazy call of ->permission() returns a hard error, check that
try_to_unlazy() succeeds before returning it. That both makes
life easier for ->permission() instances and closes the race
in ENOTDIR handling - it is possible that positive d_can_lookup()
seen in link_path_walk() applies to the state *after* unlink() +
mkdir(), while nd->inode matches the state prior to that.
Normally seeing e.g. EACCES from permission check in rcu pathwalk
means that with some timings non-rcu pathwalk would've run into
the same; however, running into a non-executable regular file
in the middle of a pathname would not get to permission check -
it would fail with ENOTDIR instead.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Avoids fun races in RCU pathwalk... Same goes for freeing LSM shite
hanging off super_block's arse.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
check_snapshot() copies the bch_snapshot to a temporary to easily handle
older versions that don't have all the fields of the current version,
but it lacked a min() to correctly handle keys newer and larger than the
current version.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If a journal write errored, the list of devices it was written to could
be empty - we're not supposed to mark an empty replicas list.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_direct_IO_read() checks the request offset and size for sector
alignment and then falls through to a couple calculations to shrink
the size of the request based on the inode size. The problem is that
these checks round up to the fs block size, which runs the risk of
underflowing iter->count if the block size happens to be large
enough. This is triggered by fstest generic/361 with a 4k block
size, which subsequently leads to a crash. To avoid this crash,
check that the shorten length doesn't exceed the overall length of
the iter.
Fixes:
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Su Yue <glass.su@suse.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If we're in FILTER_SNAPSHOTS mode and we start scanning a range of the
keyspace where no keys are visible in the current snapshot, we have a
problem - we'll scan for a very long time before scanning terminates.
Awhile back, this was fixed for most cases with peek_upto() (and
assertions that enforce that it's being used).
But the fix missed the fact that the inodes btree is different - every
key offset is in a different snapshot tree, not just the inode field.
Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Recently, we fixed our __GFP_NOFAIL usage in the readahead path, but the
easy one in read_single_folio() (where wa can return an error) was
missed - oops.
Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a crash when hot adding a PCI device to an LPAR since
recent changes
- Fix nested KVM level-2 guest reboot failure due to empty
'arch_compat'
Thanks to Amit Machhiwal, Aneesh Kumar K.V (IBM), Brian King, Gaurav
Batra, and Vaibhav Jain.
* tag 'powerpc-6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Fix L2 guest reboot failure due to empty 'arch_compat'
powerpc/pseries/iommu: DLPAR add doesn't completely initialize pci_controller
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Intel VT-d fixes for nested domain handling:
- Cache invalidation for changes in a parent domain
- Dirty tracking setting for parent and nested domains
- Fix a constant-out-of-range warning
- ARM SMMU fixes:
- Fix CD allocation from atomic context when using SVA with SMMUv3
- Revert the conversion of SMMUv2 to domain_alloc_paging(), as it
breaks the boot for Qualcomm MSM8996 devices
- Restore SVA handle sharing in core code as it turned out there are
still drivers relying on it
* tag 'iommu-fixes-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/sva: Restore SVA handle sharing
iommu/arm-smmu-v3: Do not use GFP_KERNEL under as spinlock
iommu/vt-d: Fix constant-out-of-range warning
iommu/vt-d: Set SSADE when attaching to a parent with dirty tracking
iommu/vt-d: Add missing dirty tracking set for parent domain
iommu/vt-d: Wrap the dirty tracking loop to be a helper
iommu/vt-d: Remove domain parameter for intel_pasid_setup_dirty_tracking()
iommu/vt-d: Add missing device iotlb flush for parent domain
iommu/vt-d: Update iotlb in nested domain attach
iommu/vt-d: Add missing iotlb flush for parent domain
iommu/vt-d: Add __iommu_flush_iotlb_psi()
iommu/vt-d: Track nested domains in parent
Revert "iommu/arm-smmu: Convert to domain_alloc_paging()"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A collection of significant fixes for the CXL subsystem.
The largest change in this set, that bordered on "new development", is
the fix for the fact that the location of the new qos_class attribute
did not match the Documentation. The fix ends up deleting more code
than it added, and it has a new unit test to backstop basic errors in
this interface going forward. So the "red-diff" and unit test saved
the "rip it out and try again" response.
In contrast, the new notification path for firmware reported CXL
errors (CXL CPER notifications) has a locking context bug that can not
be fixed with a red-diff. Given where the release cycle stands, it is
not comfortable to squeeze in that fix in these waning days. So, that
receives the "back it out and try again later" treatment.
There is a regression fix in the code that establishes memory NUMA
nodes for platform CXL regions. That has an ack from x86 folks. There
are a couple more fixups for Linux to understand (reassemble) CXL
regions instantiated by platform firmware. The policy around platforms
that do not match host-physical-address with system-physical-address
(i.e. systems that have an address translation mechanism between the
address range reported in the ACPI CEDT.CFMWS and endpoint decoders)
has been softened to abort driver load rather than teardown the memory
range (can cause system hangs). Lastly, there is a robustness /
regression fix for cases where the driver would previously continue in
the face of error, and a fixup for PCI error notification handling.
Summary:
- Fix NUMA initialization from ACPI CEDT.CFMWS
- Fix region assembly failures due to async init order
- Fix / simplify export of qos_class information
- Fix cxl_acpi initialization vs single-window-init failures
- Fix handling of repeated 'pci_channel_io_frozen' notifications
- Workaround platforms that violate host-physical-address ==
system-physical address assumptions
- Defer CXL CPER notification handling to v6.9"
* tag 'cxl-fixes-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/acpi: Fix load failures due to single window creation failure
acpi/ghes: Remove CXL CPER notifications
cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window
cxl/test: Add support for qos_class checking
cxl: Fix sysfs export of qos_class for memdev
cxl: Remove unnecessary type cast in cxl_qos_class_verify()
cxl: Change 'struct cxl_memdev_state' *_perf_list to single 'struct cxl_dpa_perf'
cxl/region: Allow out of order assembly of autodiscovered regions
cxl/region: Handle endpoint decoders in cxl_region_find_decoder()
x86/numa: Fix the sort compare func used in numa_fill_memblks()
x86/numa: Fix the address overlap check in numa_fill_memblks()
cxl/pci: Skip to handle RAS errors if CXL.mem device is detached
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mike Snitzer:
- Fix DM integrity and verity targets to not use excessive stack when
they recheck in the error path.
* tag 'for-6.8/dm-fix-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-integrity, dm-verity: reduce stack usage for recheck
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six fixes: the four driver ones are pretty trivial.
The larger two core changes are to try to fix various USB attached
devices which have somewhat eccentric ways of handling the VPD and
other mode pages which necessitate multiple revalidates (that were
removed in the interests of efficiency) and updating the heuristic for
supported VPD pages"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: jazz_esp: Only build if SCSI core is builtin
scsi: smartpqi: Fix disable_managed_interrupts
scsi: ufs: Uninitialized variable in ufshcd_devfreq_target()
scsi: target: pscsi: Fix bio_put() for error case
scsi: core: Consult supported VPD page list prior to fetching page
scsi: sd: usb_storage: uas: Access media prior to querying device properties
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"A bugfix for host drivers"
* tag 'i2c-for-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: when being a target, mark the last read as processed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix two cpu-hotplug issues, fix the init sequence about FDT system,
fix the coding style of dts, and fix the wrong CPUCFG ID handling of
KVM"
* tag 'loongarch-fixes-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Streamline kvm_check_cpucfg() and improve comments
LoongArch: KVM: Rename _kvm_get_cpucfg() to _kvm_get_cpucfg_mask()
LoongArch: KVM: Fix input validation of _kvm_get_cpucfg() & kvm_check_cpucfg()
LoongArch: dts: Minor whitespace cleanup
LoongArch: Call early_init_fdt_scan_reserved_mem() earlier
LoongArch: Update cpu_sibling_map when disabling nonboot CPUs
LoongArch: Disable IRQ before init_fn() for nonboot CPUs
|
|
The newly added integrity_recheck() function has another larger stack
allocation, just like its caller integrity_metadata(). When it gets
inlined, the combination of the two exceeds the warning limit for 32-bit
architectures and possibly risks an overflow when this is called from
a deep call chain through a file system:
drivers/md/dm-integrity.c:1767:13: error: stack frame size (1048) exceeds limit (1024) in 'integrity_metadata' [-Werror,-Wframe-larger-than]
1767 | static void integrity_metadata(struct work_struct *w)
Since the caller at this point is done using its checksum buffer,
just reuse the same buffer in the new function to avoid the double
allocation.
[Mikulas: add "noinline" to integrity_recheck and verity_recheck.
These functions are only called on error, so they shouldn't bloat the
stack frame or code size of the caller.]
Fixes: c88f5e553fe3 ("dm-integrity: recheck the integrity tag after a failure")
Fixes: 9177f3c0dea6 ("dm-verity: recheck the hash after a failure")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
When being a target, NAK from the controller means that all bytes have
been transferred. So, the last byte needs also to be marked as
'processed'. Otherwise index registers of backends may not increase.
Fixes: f7414cd6923f ("i2c: imx: support slave mode for imx I2C driver")
Signed-off-by: Corey Minyard <minyard@acm.org>
Tested-by: Andrew Manley <andrew.manley@sealingtech.com>
Reviewed-by: Andrew Manley <andrew.manley@sealingtech.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
[wsa: fixed comment and commit message to properly describe the case]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"Fixes CPU hotplug, the parisc stack unwinder and two possible build
errors in kprobes and ftrace area:
- Fix CPU hotplug
- Fix unaligned accesses and faults in stack unwinder
- Fix potential build errors by always including asm-generic/kprobes.h
- Fix build bug by add missing CONFIG_DYNAMIC_FTRACE check"
* tag 'parisc-for-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix stack unwinder
parisc/kprobes: always include asm-generic/kprobes.h
parisc/ftrace: add missing CONFIG_DYNAMIC_FTRACE check
Revert "parisc: Only list existing CPUs in cpu_possible_mask"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull arm and RISC-V SoC fixes from Arnd Bergmann:
"The Rockchip and IMX8 platforms get a number of fixes for dts files in
order to address some misconfigurations, including a regression for
USB-C support on some boards.
The other dts fixes are part of a series by Rob Herring to clean up
another class of dtc compiler warnings across all platforms, with a
few others helping out as well. With this, we can enable the warning
for the coming merge window without introducing regressions.
Conor Dooley has collected fixes for RISC-V platforms, both for the
dts files and for platofrm specific drivers.
The ep93xx platform gets a regression for for its gpio descriptors"
* tag 'arm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes
cache: ax45mp_cache: Align end size to cache boundary in ax45mp_dma_cache_wback()
arm64: dts: qcom: Fix interrupt-map cell sizes
arm: dts: Fix dtc interrupt_map warnings
arm64: dts: Fix dtc interrupt_provider warnings
arm: dts: Fix dtc interrupt_provider warnings
arm64: dts: freescale: Disable interrupt_map check
ARM: ep93xx: Add terminator to gpiod_lookup_table
riscv: dts: sifive: add missing #interrupt-cells to pmic
arm64: dts: rockchip: Correct Indiedroid Nova GPIO Names
arm64: dts: rockchip: Drop interrupts property from rk3328 pwm-rockchip node
arm64: dts: rockchip: set num-cs property for spi on px30
arm64: dts: rockchip: minor rk3588 whitespace cleanup
riscv: dts: starfive: replace underscores in node names
bus: imx-weim: fix valid range check
Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector"
Revert "arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector"
arm64: dts: tqma8mpql: fix audio codec iov-supply
arm64: dts: rockchip: drop unneeded status from rk3588-jaguar gpio-leds
ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A simple fix to a definition in the CXL PMU driver, a couple of
patches to restore SME control registers on the resume path (since
Arm's fast model now clears them) and a revert for our jump label asm
constraints after Geert noticed they broke the build with GCC 5.5.
There was then the ensuing discussion about raising the minimum GCC
(and corresponding binutils) versions at [1], but for now we'll keep
things working as they were until that goes ahead.
- Revert fix to jump label asm constraints, as it regresses the build
with some GCC 5.5 toolchains.
- Restore SME control registers when resuming from suspend
- Fix incorrect filter definition in CXL PMU driver"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/sme: Restore SMCR_EL1.EZT0 on exit from suspend
arm64/sme: Restore SME registers on exit from suspend
Revert "arm64: jump_label: use constraints "Si" instead of "i""
perf: CXL: fix CPMU filter value mask length
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix invalid -EBUSY on ccw_device_start() which can lead to failing
device initialization
- Add missing multiplication by 8 in __iowrite64_copy() to get the
correct byte length before calling zpci_memcpy_toio()
- Various config updates
* tag 's390-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: fix invalid -EBUSY on ccw_device_start
s390: use the correct count for __iowrite64_copy()
s390/configs: update default configurations
s390/configs: enable INIT_STACK_ALL_ZERO in all configurations
s390/configs: provide compat topic configuration target
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"A batch of MM (and one non-MM) hotfixes.
Ten are cc:stable and the remainder address post-6.7 issues or aren't
considered appropriate for backporting"
* tag 'mm-hotfixes-stable-2024-02-22-15-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kasan: guard release_free_meta() shadow access with kasan_arch_is_ready()
mm/damon/lru_sort: fix quota status loss due to online tunings
mm/damon/reclaim: fix quota stauts loss due to online tunings
MAINTAINERS: mailmap: update Shakeel's email address
mm/damon/sysfs-schemes: handle schemes sysfs dir removal before commit_schemes_quota_goals
mm: memcontrol: clarify swapaccount=0 deprecation warning
mm/memblock: add MEMBLOCK_RSRV_NOINIT into flagname[] array
mm/zswap: invalidate duplicate entry when !zswap_enabled
lib/Kconfig.debug: TEST_IOV_ITER depends on MMU
mm/swap: fix race when skipping swapcache
mm/swap_state: update zswap LRU's protection range with the folio locked
selftests/mm: uffd-unit-test check if huge page size is 0
mm/damon/core: check apply interval in damon_do_apply_schemes()
mm: zswap: fix missing folio cleanup in writeback race path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Stable fixes for 3 DM targets (integrity, verity and crypt) to
address systemic failure that can occur if user provided pages map to
the same block.
- Fix DM crypt to not allow modifying data that being encrypted for
authenticated encryption.
- Fix DM crypt and verity targets to align their respective bvec_iter
struct members to avoid the need for byte level access (due to
__packed attribute) that is costly on some arches (like RISC).
* tag 'for-6.8/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-crypt, dm-integrity, dm-verity: bump target version
dm-verity, dm-crypt: align "struct bvec_iter" correctly
dm-crypt: recheck the integrity tag after a failure
dm-crypt: don't modify the data when using authenticated encryption
dm-verity: recheck the hash after a failure
dm-integrity: recheck the integrity tag after a failure
|
|
Pull drm fixes from Dave Airlie:
"This is the weekly drm fixes. Non-drivers there is a fbdev/sparc fix,
syncobj, ttm and buddy fixes.
On the driver side, ivpu, meson, i915 have a small fix each. Then
amdgpu and xe have a bunch. Nouveau has some minor uapi additions to
give userspace some useful info along with a Kconfig change to allow
the new GSP firmware paths to be used by default on the GPUs it
supports.
Seems about the usual amount for this time of release cycle.
fbdev:
- fix sparc undefined reference
syncobj:
- fix sync obj fence waiting
- handle NULL fence in syncobj eventfd code
ttm:
- fix invalid free
buddy:
- fix list handling
- fix 32-bit build
meson:
- don't remove bridges from other drivers
nouveau:
- fix build warnings
- add two minor info parameters
- add a Kconfig to allow GSP by default on some GPUs
ivpu:
- allow fw to do initial tile config
i915:
- fix TV mode
amdgpu:
- Suspend/resume fixes
- Backlight error fix
- DCN 3.5 fixes
- Misc fixes
xe:
- Remove support for persistent exec_queues
- Drop a reduntant sysfs newline printout
- A three-patch fix for a VM_BIND rebind optimization path
- Fix a modpost warning on an xe KUNIT module"
* tag 'drm-fixes-2024-02-23' of git://anongit.freedesktop.org/drm/drm: (27 commits)
nouveau: add an ioctl to report vram usage
nouveau: add an ioctl to return vram bar size.
nouveau/gsp: add kconfig option to enable GSP paths by default
drm/amdgpu: Fix the runtime resume failure issue
drm/amd/display: fix null-pointer dereference on edid reading
drm/amd/display: Fix memory leak in dm_sw_fini()
drm/amd/display: fix input states translation error for dcn35 & dcn351
drm/amd/display: Fix potential null pointer dereference in dc_dmub_srv
drm/amd/display: Only allow dig mapping to pwrseq in new asic
drm/amd/display: adjust few initialization order in dm
drm/syncobj: handle NULL fence in syncobj_eventfd_entry_func
drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is set
drm/ttm: Fix an invalid freeing on already freed page in error path
sparc: Fix undefined reference to fb_is_primary_device
drm/xe: Fix modpost warning on xe_mocs kunit module
drm/xe/xe_gt_idle: Drop redundant newline in name
drm/xe: Return 2MB page size for compact 64k PTEs
drm/xe: Add XE_VMA_PTE_64K VMA flag
drm/xe: Fix xe_vma_set_pte_size
drm/xe/uapi: Remove support for persistent exec_queues
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Do not try to set a sleeping device to standby. Sleep is a deeper
sleep state than standby, and needs a reset to wake up the drive. A
system resume will reset the port. Sending a command other than reset
to a sleeping device is not wise, as the command will timeout (Damien
Le Moal)
- Do not try to put a device to standby twice during system shutdown.
ata_dev_power_set_standby() is currently called twice during
shutdown, once after the scsi device is removed, and another when
ata_pci_shutdown_one() executes. Modify ata_dev_power_set_standby()
to do nothing if the device is already in standby (Damien Le Moal)
- Add a quirk for ASM1064 to fixup the number of implemented ports. We
probe all ports that the hardware reports to be implemented. Probing
ports that are not implemented causes significantly increased boot
time (Andrey Jr. Melnikov)
- Fix error handling for the ahci_ceva driver. Ensure that the
ahci_ceva driver does a proper cleanup of its resources in the error
path (Radhey Shyam Pandey)
* tag 'ata-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Do not call ata_dev_power_set_standby() twice
ata: ahci_ceva: fix error handling for Xilinx GT PHY support
ahci: asm1064: correct count of reported ports
ata: libata-core: Do not try to set sleeping devices to standby
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- fix a use-case where no pins are mapped to GPIOs in
gpiochip_generic_config()
* tag 'gpio-fixes-for-v6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Handle no pin_ranges in gpiochip_generic_config()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix a global-out-of-bounds bug in nct6775 driver"
* tag 'hwmon-for-v6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (nct6775) Fix access to temperature configuration registers
|
|
Prior to commit 092edaddb660 ("iommu: Support mm PASID 1:n with sva
domains") the code allowed a SVA handle to be bound multiple times to the
same (mm, device) pair. This was alluded to in the kdoc comment, but we
had understood this to be more a remark about allowing multiple devices,
not a literal same-driver re-opening the same SVA.
It turns out uacce and idxd were both relying on the core code to handle
reference counting for same-device same-mm scenarios. As this looks hard
to resolve in the drivers bring it back to the core code.
The new design has changed the meaning of the domain->users refcount to
refer to the number of devices that are sharing that domain for the same
mm. This is part of the design to lift the SVA domain de-duplication out
of the drivers.
Return the old behavior by explicitly de-duplicating the struct iommu_sva
handle. The same (mm, device) will return the same handle pointer and the
core code will handle tracking this. The last unbind of the handle will
destroy it.
Fixes: 092edaddb660 ("iommu: Support mm PASID 1:n with sva domains")
Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Closes: https://lore.kernel.org/all/20240221110658.529-1-zhangfei.gao@linaro.org/
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/0-v1-9455fc497a6f+3b4-iommu_sva_sharing_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into iommu/fixes
Arm SMMU fixes for 6.8
- Fix CD allocation from atomic context when using SVA with SMMUv3
- Revert the conversion of SMMUv2 to domain_alloc_paging(), as it
breaks the boot for Qualcomm MSM8996 devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v6.8
- Add missing #interrupt-cells to DA9063 nodes.
* tag 'renesas-fixes-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes
Link: https://lore.kernel.org/r/cover.1708597150.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V Devicetree fixes for v6.8-rc6
Two fixes for W=2 issues in devicetrees, which should constitute fixes
for all reasonable-to-fix W=2 problems on RISC-V. The others are caused
by standard USB and MMC property names containing underscores that are
not likely to ever change.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: sifive: add missing #interrupt-cells to pmic
riscv: dts: starfive: replace underscores in node names
Link: https://lore.kernel.org/r/20240221-foil-glade-09dbf1aa3fe2@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V SoC driver fixes for v6.8-rc6
A fix for a kconfig symbol whose help text has been unhelpful since its
introduction.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-drivers-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
soc: microchip: Fix POLARFIRE_SOC_SYS_CTRL input prompt
Link: https://lore.kernel.org/r/20240221-irate-outrage-cf7f96f83074@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
Microchip firmware driver fixes for v6.8-rc6
A single fix for me incorrectly using sizeof().
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-firmware-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: fix wrong sizeof argument
Link: https://lore.kernel.org/r/20240221-recognize-dust-4bb575f4e67b@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V Cache driver fixes for v6.8-rc6
A single fix for an inconsistency reported during CIP review by Pavel in
the newly added ax45mp cache driver.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-cache-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
cache: ax45mp_cache: Align end size to cache boundary in ax45mp_dma_cache_wback()
Link: https://lore.kernel.org/r/20240221-keenness-handheld-b930aaa77708@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
All the checks currently done in kvm_check_cpucfg can be realized with
early returns, so just do that to avoid extra cognitive burden related
to the return value handling.
While at it, clean up comments of _kvm_get_cpucfg_mask() and
kvm_check_cpucfg(), by removing comments that are merely restatement of
the code nearby, and paraphrasing the rest so they read more natural for
English speakers (that likely are not familiar with the actual Chinese-
influenced grammar).
No functional changes intended.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The function is not actually a getter of guest CPUCFG, but rather
validation of the input CPUCFG ID plus information about the supported
bit flags of that CPUCFG leaf. So rename it to avoid confusion.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The range check for the CPUCFG ID is wrong (should have been a ||
instead of &&) and useless in effect, so fix the obvious mistake.
Furthermore, the juggling of the temp return value is unnecessary,
because it is semantically equivalent and more readable to just
return at every switch case's end. This is done too to avoid potential
bugs in the future related to the unwanted complexity.
Also, the return value of _kvm_get_cpucfg is meant to be checked, but
this was not done, so bad CPUCFG IDs wrongly fall back to the default
case and 0 is incorrectly returned; check the return value to fix the
UAPI behavior.
While at it, also remove the redundant range check in kvm_check_cpucfg,
because out-of-range CPUCFG IDs are already rejected by the -EINVAL
as returned by _kvm_get_cpucfg().
Fixes: db1ecca22edf ("LoongArch: KVM: Add LSX (128bit SIMD) support")
Fixes: 118e10cd893d ("LoongArch: KVM: Add LASX (256bit SIMD) support")
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The DTS code coding style expects exactly one space before '{'
character.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The unflatten_and_copy_device_tree() function contains a call to
memblock_alloc(). This means that memblock is allocating memory before
any of the reserved memory regions are set aside in the arch_mem_init()
function which calls early_init_fdt_scan_reserved_mem(). Therefore,
there is a possibility for memblock to allocate from any of the
reserved memory regions.
Hence, move the call to early_init_fdt_scan_reserved_mem() to be earlier
in the init sequence, so that the reserved memory regions are set aside
before any allocations are done using memblock.
Cc: stable@vger.kernel.org
Fixes: 88d4d957edc707e ("LoongArch: Add FDT booting support from efi system table")
Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Update cpu_sibling_map when disabling nonboot CPUs by defining & calling
clear_cpu_sibling_map(), otherwise we get such errors on SMT systems:
jump label: negative count!
WARNING: CPU: 6 PID: 45 at kernel/jump_label.c:263 __static_key_slow_dec_cpuslocked+0xec/0x100
CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340
pc 90000000004c302c ra 90000000004c302c tp 90000001005bc000 sp 90000001005bfd20
a0 000000000000001b a1 900000000224c278 a2 90000001005bfb58 a3 900000000224c280
a4 900000000224c278 a5 90000001005bfb50 a6 0000000000000001 a7 0000000000000001
t0 ce87a4763eb5234a t1 ce87a4763eb5234a t2 0000000000000000 t3 0000000000000000
t4 0000000000000006 t5 0000000000000000 t6 0000000000000064 t7 0000000000001964
t8 000000000009ebf6 u0 9000000001f2a068 s9 0000000000000000 s0 900000000246a2d8
s1 ffffffffffffffff s2 ffffffffffffffff s3 90000000021518c0 s4 0000000000000040
s5 9000000002151058 s6 9000000009828e40 s7 00000000000000b4 s8 0000000000000006
ra: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100
ERA: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0)
PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV)
CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340
Stack : 0000000000000000 900000000203f258 900000000179afc8 90000001005bc000
90000001005bf980 0000000000000000 90000001005bf988 9000000001fe0be0
900000000224c280 900000000224c278 90000001005bf8c0 0000000000000001
0000000000000001 ce87a4763eb5234a 0000000007f38000 90000001003f8cc0
0000000000000000 0000000000000006 0000000000000000 4c206e6f73676e6f
6f4c203a656d616e 000000000009ec99 0000000007f38000 0000000000000000
900000000214b000 9000000001fe0be0 0000000000000004 0000000000000000
0000000000000107 0000000000000009 ffffffffffafdabe 00000000000000b4
0000000000000006 90000000004c302c 9000000000224528 00005555939a0c7c
00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
...
Call Trace:
[<9000000000224528>] show_stack+0x48/0x1a0
[<900000000179afc8>] dump_stack_lvl+0x78/0xa0
[<9000000000263ed0>] __warn+0x90/0x1a0
[<90000000017419b8>] report_bug+0x1b8/0x280
[<900000000179c564>] do_bp+0x264/0x420
[<90000000004c302c>] __static_key_slow_dec_cpuslocked+0xec/0x100
[<90000000002b4d7c>] sched_cpu_deactivate+0x2fc/0x300
[<9000000000266498>] cpuhp_invoke_callback+0x178/0x8a0
[<9000000000267f70>] cpuhp_thread_fun+0xf0/0x240
[<90000000002a117c>] smpboot_thread_fn+0x1dc/0x2e0
[<900000000029a720>] kthread+0x140/0x160
[<9000000000222288>] ret_from_kernel_thread+0xc/0xa4
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Disable IRQ before init_fn() for nonboot CPUs when hotplug, in order to
silence such warnings (and also avoid potential errors due to unexpected
interrupts):
WARNING: CPU: 1 PID: 0 at kernel/rcu/tree.c:4503 rcu_cpu_starting+0x214/0x280
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198
pc 90000000048e3334 ra 90000000047bd56c tp 900000010039c000 sp 900000010039fdd0
a0 0000000000000001 a1 0000000000000006 a2 900000000802c040 a3 0000000000000000
a4 0000000000000001 a5 0000000000000004 a6 0000000000000000 a7 90000000048e3f4c
t0 0000000000000001 t1 9000000005c70968 t2 0000000004000000 t3 000000000005e56e
t4 00000000000002e4 t5 0000000000001000 t6 ffffffff80000000 t7 0000000000040000
t8 9000000007931638 u0 0000000000000006 s9 0000000000000004 s0 0000000000000001
s1 9000000006356ac0 s2 9000000007244000 s3 0000000000000001 s4 0000000000000001
s5 900000000636f000 s6 7fffffffffffffff s7 9000000002123940 s8 9000000001ca55f8
ra: 90000000047bd56c tlb_init+0x24c/0x528
ERA: 90000000048e3334 rcu_cpu_starting+0x214/0x280
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000000 (PPLV0 -PIE -PWE)
EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
ECFG: 00071000 (LIE=12 VS=7)
ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0)
PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198
Stack : 0000000000000000 9000000006375000 9000000005b61878 900000010039c000
900000010039fa30 0000000000000000 900000010039fa38 900000000619a140
9000000006456888 9000000006456880 900000010039f950 0000000000000001
0000000000000001 cb0cb028ec7e52e1 0000000002b90000 9000000100348700
0000000000000000 0000000000000001 ffffffff916d12f1 0000000000000003
0000000000040000 9000000007930370 0000000002b90000 0000000000000004
9000000006366000 900000000619a140 0000000000000000 0000000000000004
0000000000000000 0000000000000009 ffffffffffc681f2 9000000002123940
9000000001ca55f8 9000000006366000 90000000047a4828 00007ffff057ded8
00000000000000b0 0000000000000000 0000000000000000 0000000000071000
...
Call Trace:
[<90000000047a4828>] show_stack+0x48/0x1a0
[<9000000005b61874>] dump_stack_lvl+0x84/0xcc
[<90000000047f60ac>] __warn+0x8c/0x1e0
[<9000000005b0ab34>] report_bug+0x1b4/0x280
[<9000000005b63110>] do_bp+0x2d0/0x480
[<90000000047a2e20>] handle_bp+0x120/0x1c0
[<90000000048e3334>] rcu_cpu_starting+0x214/0x280
[<90000000047bd568>] tlb_init+0x248/0x528
[<90000000047a4c44>] per_cpu_trap_init+0x124/0x160
[<90000000047a19f4>] cpu_probe+0x494/0xa00
[<90000000047b551c>] start_secondary+0x3c/0xc0
[<9000000005b66134>] smpboot_entry+0x50/0x58
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This reports the currently used vram allocations.
userspace using this has been proposed for nvk, but
it's a rather trivial uapi addition.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
