summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-02-20afs: Fix ignored callbacks over ipv4Marc Dionne
When searching for a matching peer, all addresses need to be searched, not just the ipv6 ones in the fs_addresses6 list. Given that the lists no longer contain addresses, there is little reason to splitting things between separate lists, so unify them into a single list. When processing an incoming callback from an ipv4 address, this would lead to a failure to set call->server, resulting in the callback being ignored and the client seeing stale contents. Fixes: 72904d7b9bfb ("rxrpc, afs: Allow afs to pin rxrpc_peer objects") Reported-by: Markus Suvanto <markus.suvanto@gmail.com> Link: https://lists.infradead.org/pipermail/linux-afs/2024-February/008035.html Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lists.infradead.org/pipermail/linux-afs/2024-February/008037.html # v1 Link: https://lists.infradead.org/pipermail/linux-afs/2024-February/008066.html # v2 Link: https://lore.kernel.org/r/20240219143906.138346-2-dhowells@redhat.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-02-20cachefiles: fix memory leak in cachefiles_add_cache()Baokun Li
The following memory leak was reported after unbinding /dev/cachefiles: ================================================================== unreferenced object 0xffff9b674176e3c0 (size 192): comm "cachefilesd2", pid 680, jiffies 4294881224 hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc ea38a44b): [<ffffffff8eb8a1a5>] kmem_cache_alloc+0x2d5/0x370 [<ffffffff8e917f86>] prepare_creds+0x26/0x2e0 [<ffffffffc002eeef>] cachefiles_determine_cache_security+0x1f/0x120 [<ffffffffc00243ec>] cachefiles_add_cache+0x13c/0x3a0 [<ffffffffc0025216>] cachefiles_daemon_write+0x146/0x1c0 [<ffffffff8ebc4a3b>] vfs_write+0xcb/0x520 [<ffffffff8ebc5069>] ksys_write+0x69/0xf0 [<ffffffff8f6d4662>] do_syscall_64+0x72/0x140 [<ffffffff8f8000aa>] entry_SYSCALL_64_after_hwframe+0x6e/0x76 ================================================================== Put the reference count of cache_cred in cachefiles_daemon_unbind() to fix the problem. And also put cache_cred in cachefiles_add_cache() error branch to avoid memory leaks. Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem") CC: stable@vger.kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Link: https://lore.kernel.org/r/20240217081431.796809-1-libaokun1@huawei.com Acked-by: David Howells <dhowells@redhat.com> Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-02-20usb: typec: tpcm: Fix issues with power being removed during resetMark Brown
Since the merge of b717dfbf73e8 ("Revert "usb: typec: tcpm: fix cc role at port reset"") into mainline the LibreTech Renegade Elite/Firefly has died during boot, the main symptom observed in testing is a sudden stop in console output. Gábor Stefanik identified in review that the patch would cause power to be removed from devices without batteries (like this board), observing that while the patch is correct according to the spec this appears to be an oversight in the spec. Given that the change makes previously working systems unusable let's revert it, there was some discussion of identifying systems that have alternative power and implementing the standards conforming behaviour in only that case. Fixes: b717dfbf73e8 ("Revert "usb: typec: tcpm: fix cc role at port reset"") Cc: stable <stable@kernel.org> Cc: Badhri Jagan Sridharan <badhri@google.com> Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240212-usb-fix-renegade-v1-1-22c43c88d635@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-20erofs: fix handling kern_mount() failureAl Viro
if you have a variable that holds NULL or a pointer to live struct mount, do not shove ERR_PTR() into it - not if you later treat "not NULL" as "holds a pointer to object". Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2024-02-19KVM/VMX: Move VERW closer to VMentry for MDS mitigationPawan Gupta
During VMentry VERW is executed to mitigate MDS. After VERW, any memory access like register push onto stack may put host data in MDS affected CPU buffers. A guest can then use MDS to sample host data. Although likelihood of secrets surviving in registers at current VERW callsite is less, but it can't be ruled out. Harden the MDS mitigation by moving the VERW mitigation late in VMentry path. Note that VERW for MMIO Stale Data mitigation is unchanged because of the complexity of per-guest conditional VERW which is not easy to handle that late in asm with no GPRs available. If the CPU is also affected by MDS, VERW is unconditionally executed late in asm regardless of guest having MMIO access. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-6-a6216d83edb7%40linux.intel.com
2024-02-19KVM/VMX: Use BT+JNC, i.e. EFLAGS.CF to select VMRESUME vs. VMLAUNCHSean Christopherson
Use EFLAGS.CF instead of EFLAGS.ZF to track whether to use VMRESUME versus VMLAUNCH. Freeing up EFLAGS.ZF will allow doing VERW, which clobbers ZF, for MDS mitigations as late as possible without needing to duplicate VERW for both paths. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Nikolay Borisov <nik.borisov@suse.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-5-a6216d83edb7%40linux.intel.com
2024-02-19x86/bugs: Use ALTERNATIVE() instead of mds_user_clear static keyPawan Gupta
The VERW mitigation at exit-to-user is enabled via a static branch mds_user_clear. This static branch is never toggled after boot, and can be safely replaced with an ALTERNATIVE() which is convenient to use in asm. Switch to ALTERNATIVE() to use the VERW mitigation late in exit-to-user path. Also remove the now redundant VERW in exc_nmi() and arch_exit_to_user_mode(). Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-4-a6216d83edb7%40linux.intel.com
2024-02-19x86/entry_32: Add VERW just before userspace transitionPawan Gupta
As done for entry_64, add support for executing VERW late in exit to user path for 32-bit mode. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-3-a6216d83edb7%40linux.intel.com
2024-02-19x86/entry_64: Add VERW just before userspace transitionPawan Gupta
Mitigation for MDS is to use VERW instruction to clear any secrets in CPU Buffers. Any memory accesses after VERW execution can still remain in CPU buffers. It is safer to execute VERW late in return to user path to minimize the window in which kernel data can end up in CPU buffers. There are not many kernel secrets to be had after SWITCH_TO_USER_CR3. Add support for deploying VERW mitigation after user register state is restored. This helps minimize the chances of kernel data ending up into CPU buffers after executing VERW. Note that the mitigation at the new location is not yet enabled. Corner case not handled ======================= Interrupts returning to kernel don't clear CPUs buffers since the exit-to-user path is expected to do that anyways. But, there could be a case when an NMI is generated in kernel after the exit-to-user path has cleared the buffers. This case is not handled and NMI returning to kernel don't clear CPU buffers because: 1. It is rare to get an NMI after VERW, but before returning to userspace. 2. For an unprivileged user, there is no known way to make that NMI less rare or target it. 3. It would take a large number of these precisely-timed NMIs to mount an actual attack. There's presumably not enough bandwidth. 4. The NMI in question occurs after a VERW, i.e. when user state is restored and most interesting data is already scrubbed. Whats left is only the data that NMI touches, and that may or may not be of any interest. Suggested-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-2-a6216d83edb7%40linux.intel.com
2024-02-19x86/bugs: Add asm helpers for executing VERWPawan Gupta
MDS mitigation requires clearing the CPU buffers before returning to user. This needs to be done late in the exit-to-user path. Current location of VERW leaves a possibility of kernel data ending up in CPU buffers for memory accesses done after VERW such as: 1. Kernel data accessed by an NMI between VERW and return-to-user can remain in CPU buffers since NMI returning to kernel does not execute VERW to clear CPU buffers. 2. Alyssa reported that after VERW is executed, CONFIG_GCC_PLUGIN_STACKLEAK=y scrubs the stack used by a system call. Memory accesses during stack scrubbing can move kernel stack contents into CPU buffers. 3. When caller saved registers are restored after a return from function executing VERW, the kernel stack accesses can remain in CPU buffers(since they occur after VERW). To fix this VERW needs to be moved very late in exit-to-user path. In preparation for moving VERW to entry/exit asm code, create macros that can be used in asm. Also make VERW patching depend on a new feature flag X86_FEATURE_CLEAR_CPU_BUF. Reported-by: Alyssa Milburn <alyssa.milburn@intel.com> Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-1-a6216d83edb7%40linux.intel.com
2024-02-19parisc: Fix stack unwinderGuenter Roeck
Debugging shows a large number of unaligned access traps in the unwinder code. Code analysis reveals a number of issues with this code: - handle_interruption is passed twice through dereference_kernel_function_descriptor() - ret_from_kernel_thread, syscall_exit, intr_return, _switch_to_ret, and _call_on_stack are passed through dereference_kernel_function_descriptor() even though they are not declared as function pointers. To fix the problems, drop one of the calls to dereference_kernel_function_descriptor() for handle_interruption, and compare the other pointers directly. Fixes: 6414b30b39f9 ("parisc: unwind: Avoid missing prototype warning for handle_interruption()") Fixes: 8e0ba125c2bf ("parisc/unwind: fix unwinder when CONFIG_64BIT is enabled") Cc: Helge Deller <deller@gmx.de> Cc: Sven Schnelle <svens@stackframe.org> Cc: John David Anglin <dave.anglin@bell.net> Cc: Charlie Jenkins <charlie@rivosinc.com> Cc: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Helge Deller <deller@gmx.de>
2024-02-19PCI/MSI: Prevent MSI hardware interrupt number truncationVidya Sagar
While calculating the hardware interrupt number for a MSI interrupt, the higher bits (i.e. from bit-5 onwards a.k.a domain_nr >= 32) of the PCI domain number gets truncated because of the shifted value casting to return type of pci_domain_nr() which is 'int'. This for example is resulting in same hardware interrupt number for devices 0019:00:00.0 and 0039:00:00.0. To address this cast the PCI domain number to 'irq_hw_number_t' before left shifting it to calculate the hardware interrupt number. Please note that this fixes the issue only on 64-bit systems and doesn't change the behavior for 32-bit systems i.e. the 32-bit systems continue to have the issue. Since the issue surfaces only if there are too many PCIe controllers in the system which usually is the case in modern server systems and they don't tend to run 32-bit kernels. Fixes: 3878eaefb89a ("PCI/MSI: Enhance core to support hierarchy irqdomain") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240115135649.708536-1-vidyas@nvidia.com
2024-02-19irqchip/sifive-plic: Enable interrupt if needed before EOINam Cao
RISC-V PLIC cannot "end-of-interrupt" (EOI) disabled interrupts, as explained in the description of Interrupt Completion in the PLIC spec: "The PLIC signals it has completed executing an interrupt handler by writing the interrupt ID it received from the claim to the claim/complete register. The PLIC does not check whether the completion ID is the same as the last claim ID for that target. If the completion ID does not match an interrupt source that *is currently enabled* for the target, the completion is silently ignored." Commit 69ea463021be ("irqchip/sifive-plic: Fixup EOI failed when masked") ensured that EOI is successful by enabling interrupt first, before EOI. Commit a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask operations") removed the interrupt enabling code from the previous commit, because it assumes that interrupt should already be enabled at the point of EOI. However, this is incorrect: there is a window after a hart claiming an interrupt and before irq_desc->lock getting acquired, interrupt can be disabled during this window. Thus, EOI can be invoked while the interrupt is disabled, effectively nullify this EOI. This results in the interrupt never gets asserted again, and the device who uses this interrupt appears frozen. Make sure that interrupt is really enabled before EOI. Fixes: a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask operations") Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Samuel Holland <samuel@sholland.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: linux-riscv@lists.infradead.org Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240131081933.144512-1-namcao@linutronix.de
2024-02-19platform/x86/amd/pmf: Fix a potential race with policy binary sideloadMario Limonciello
The debugfs `update_policy` file is created before amd_pmf_start_policy_engine() has completed, and thus there could be a possible (albeit unlikely) race between sideloading a policy and the BIOS policy getting setup. Move the debugfs file creation after all BIOS policy is setup. Fixes: 10817f28e533 ("platform/x86/amd/pmf: Add capability to sideload of policy binary") Reported-by: Hans de Goede <hdegoede@redhat.com> Closes: https://lore.kernel.org/platform-driver-x86/15df7d02-b0aa-457a-954a-9d280a592843@redhat.com/T/#m2c445f135e5ef9b53184be7fc9df84e15f89d4d9 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240217015642.113806-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-02-19platform/x86/amd/pmf: Fixup error handling for amd_pmf_init_smart_pc()Mario Limonciello
amd_pmf_init_smart_pc() calls out to amd_pmf_get_bios_buffer() but the error handling flow doesn't clean everything up allocated memory. As amd_pmf_get_bios_buffer() is only called by amd_pmf_init_smart_pc(), fold it into the function and add labels to clean up any step that can fail along the way. Explicitly set everything allocated to NULL as there are other features that may access some of the same variables. Fixes: 7c45534afa44 ("platform/x86/amd/pmf: Add support for PMF Policy Binary") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240217014107.113749-3-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-02-19platform/x86/amd/pmf: Add debugging message for missing policy dataMario Limonciello
If a machine advertises Smart PC support but is missing policy data show a debugging message to help clarify why Smart PC wasn't enabled. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240217014107.113749-2-mario.limonciello@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-02-19platform/x86/amd/pmf: Fix a suspend hang on Framework 13Mario Limonciello
The buffer is cleared in the suspend handler but used in the delayed work for amd_pmf_get_metrics(). Stop clearing it to fix the hang. Reported-by: Trolli Schmittlauch <t.schmittlauch@orlives.de> Closes: https://lore.kernel.org/regressions/ed2226ff-257b-4cfd-afd6-bf3be9785474@localhost/ Closes: https://community.frame.work/t/kernel-6-8-rc-system-freezes-after-resuming-from-suspend-reproducers-wanted/45381 Fixes: 2b3a7f06caaf ("platform/x86/amd/pmf: Change return type of amd_pmf_set_dram_addr()") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240217005216.113408-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-02-19platform/x86/amd/pmf: Fix TEE enact command failure after suspend and resumeShyam Sundar S K
TEE enact command failures are seen after each suspend/resume cycle; fix this by cancelling the policy builder workqueue before going into suspend and reschedule the workqueue after resume. [ 629.516792] ccp 0000:c2:00.2: tee: command 0x5 timed out, disabling PSP [ 629.516835] amd-pmf AMDI0102:00: TEE enact cmd failed. err: ffff000e, ret:0 [ 630.550464] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_RESPONSE:1 [ 630.550511] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_ARGUMENT:7 [ 630.550548] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_MESSAGE:16 Fixes: ae82cef7d9c5 ("platform/x86/amd/pmf: Add support for PMF-TA interaction") Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240216064112.962582-2-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-02-19platform/x86/amd/pmf: Remove smart_pc_status enumShyam Sundar S K
Improve code readability by removing smart_pc_status enum, as the same can be done with a simple true/false check; Update the code checks accordingly. Also add a missing return on amd_pmf_init_smart_pc() success, to skip trying to setup the auto / slider modes which should not be used in this case. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240216064112.962582-1-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-02-19platform/x86: touchscreen_dmi: Consolidate Goodix upside-down touchscreen dataHans de Goede
Now that prefix matches for ACPI names are supported, the ts_dmi_data structs for "GDIX1001:00" and "GDIX1001:01" can be consolidated into a single match matching on "GDIX1001". For consistency also change gdix1002_00_upside_down_data to match. Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240212120608.30469-2-hdegoede@redhat.com
2024-02-19platform/x86: touchscreen_dmi: Allow partial (prefix) matches for ACPI namesHans de Goede
On some devices the ACPI name of the touchscreen is e.g. either MSSL1680:00 or MSSL1680:01 depending on the BIOS version. This happens for example on the "Chuwi Hi8 Air" tablet where the initial commit's ts_data uses "MSSL1680:00" but the tablets from the github issue and linux-hardware.org probe linked below both use "MSSL1680:01". Replace the strcmp() match on ts_data->acpi_name with a strstarts() check to allow using a partial match on just the ACPI HID of "MSSL1680" and change the ts_data->acpi_name for the "Chuwi Hi8 Air" accordingly to fix the touchscreen not working on models where it is "MSSL1680:01". Note this drops the length check for I2C_NAME_SIZE. This never was necessary since the ACPI names used are never more then 11 chars and I2C_NAME_SIZE is 20 so the replaced strncmp() would always stop long before reaching I2C_NAME_SIZE. Link: https://linux-hardware.org/?computer=AC4301C0542A Fixes: bbb97d728f77 ("platform/x86: touchscreen_dmi: Add info for the Chuwi Hi8 Air tablet") Closes: https://github.com/onitake/gsl-firmware/issues/91 Cc: stable@vger.kernel.org Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240212120608.30469-1-hdegoede@redhat.com
2024-02-19platform/x86: intel: int0002_vgpio: Pass IRQF_ONESHOT to request_irq()Hans de Goede
Since commit 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for SCI") the ACPI OSL code passes IRQF_ONESHOT when requesting the SCI. Since the INT0002 GPIO is typically shared with the ACPI SCI the INT0002 driver must pass the same flags. This fixes the INT0002 driver failing to probe due to following error + as well as removing the backtrace that follows this error: "genirq: Flags mismatch irq 9. 00000084 (INT0002) vs. 00002080 (acpi)" Fixes: 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for SCI") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240210110149.12803-1-hdegoede@redhat.com
2024-02-19platform/x86: think-lmi: Fix password opcode ordering for workstationsMark Pearson
The Lenovo workstations require the password opcode to be run before the attribute value is changed (if Admin password is enabled). Tested on some Thinkpads to confirm they are OK with this order too. Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Fixes: 640a5fa50a42 ("platform/x86: think-lmi: Opcode support") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240209152359.528919-1-mpearson-lenovo@squebb.ca Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-02-19selftests/bpf: Add negtive test cases for task iterYafang Shao
Incorporate a test case to assess the handling of invalid flags or task__nullable parameters passed to bpf_iter_task_new(). Prior to the preceding commit, this scenario could potentially trigger a kernel panic. However, with the previous commit, this test case is expected to function correctly. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240217114152.1623-3-laoar.shao@gmail.com
2024-02-19bpf: Fix an issue due to uninitialized bpf_iter_taskYafang Shao
Failure to initialize it->pos, coupled with the presence of an invalid value in the flags variable, can lead to it->pos referencing an invalid task, potentially resulting in a kernel panic. To mitigate this risk, it's crucial to ensure proper initialization of it->pos to NULL. Fixes: ac8148d957f5 ("bpf: bpf_iter_task_next: use next_task(kit->task) rather than next_task(kit->pos)") Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Oleg Nesterov <oleg@redhat.com> Link: https://lore.kernel.org/bpf/20240217114152.1623-2-laoar.shao@gmail.com
2024-02-19selftests/bpf: Test racing between bpf_timer_cancel_and_free and ↵Martin KaFai Lau
bpf_timer_cancel This selftest is based on a Alexei's test adopted from an internal user to troubleshoot another bug. During this exercise, a separate racing bug was discovered between bpf_timer_cancel_and_free and bpf_timer_cancel. The details can be found in the previous patch. This patch is to add a selftest that can trigger the bug. I can trigger the UAF everytime in my qemu setup with KASAN. The idea is to have multiple user space threads running in a tight loop to exercise both bpf_map_update_elem (which calls into bpf_timer_cancel_and_free) and bpf_timer_cancel. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/bpf/20240215211218.990808-2-martin.lau@linux.dev
2024-02-19bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancelMartin KaFai Lau
The following race is possible between bpf_timer_cancel_and_free and bpf_timer_cancel. It will lead a UAF on the timer->timer. bpf_timer_cancel(); spin_lock(); t = timer->time; spin_unlock(); bpf_timer_cancel_and_free(); spin_lock(); t = timer->timer; timer->timer = NULL; spin_unlock(); hrtimer_cancel(&t->timer); kfree(t); /* UAF on t */ hrtimer_cancel(&t->timer); In bpf_timer_cancel_and_free, this patch frees the timer->timer after a rcu grace period. This requires a rcu_head addition to the "struct bpf_hrtimer". Another kfree(t) happens in bpf_timer_init, this does not need a kfree_rcu because it is still under the spin_lock and timer->timer has not been visible by others yet. In bpf_timer_cancel, rcu_read_lock() is added because this helper can be used in a non rcu critical section context (e.g. from a sleepable bpf prog). Other timer->timer usages in helpers.c have been audited, bpf_timer_cancel() is the only place where timer->timer is used outside of the spin_lock. Another solution considered is to mark a t->flag in bpf_timer_cancel and clear it after hrtimer_cancel() is done. In bpf_timer_cancel_and_free, it busy waits for the flag to be cleared before kfree(t). This patch goes with a straight forward solution and frees timer->timer after a rcu grace period. Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.") Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/bpf/20240215211218.990808-1-martin.lau@linux.dev
2024-02-19enic: Avoid false positive under FORTIFY_SOURCEKees Cook
FORTIFY_SOURCE has been ignoring 0-sized destinations while the kernel code base has been converted to flexible arrays. In order to enforce the 0-sized destinations (e.g. with __counted_by), the remaining 0-sized destinations need to be handled. Unfortunately, struct vic_provinfo resists full conversion, as it contains a flexible array of flexible arrays, which is only possible with the 0-sized fake flexible array. Use unsafe_memcpy() to avoid future false positives under CONFIG_FORTIFY_SOURCE. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-19ionic: use pci_is_enabled not open codeShannon Nelson
Since there is a utility available for this, use the API rather than open code. Fixes: 13943d6c8273 ("ionic: prevent pci disable of already disabled device") Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-19btrfs: fix deadlock with fiemap and extent lockingJosef Bacik
While working on the patchset to remove extent locking I got a lockdep splat with fiemap and pagefaulting with my new extent lock replacement lock. This deadlock exists with our normal code, we just don't have lockdep annotations with the extent locking so we've never noticed it. Since we're copying the fiemap extent to user space on every iteration we have the chance of pagefaulting. Because we hold the extent lock for the entire range we could mkwrite into a range in the file that we have mmap'ed. This would deadlock with the following stack trace [<0>] lock_extent+0x28d/0x2f0 [<0>] btrfs_page_mkwrite+0x273/0x8a0 [<0>] do_page_mkwrite+0x50/0xb0 [<0>] do_fault+0xc1/0x7b0 [<0>] __handle_mm_fault+0x2fa/0x460 [<0>] handle_mm_fault+0xa4/0x330 [<0>] do_user_addr_fault+0x1f4/0x800 [<0>] exc_page_fault+0x7c/0x1e0 [<0>] asm_exc_page_fault+0x26/0x30 [<0>] rep_movs_alternative+0x33/0x70 [<0>] _copy_to_user+0x49/0x70 [<0>] fiemap_fill_next_extent+0xc8/0x120 [<0>] emit_fiemap_extent+0x4d/0xa0 [<0>] extent_fiemap+0x7f8/0xad0 [<0>] btrfs_fiemap+0x49/0x80 [<0>] __x64_sys_ioctl+0x3e1/0xb50 [<0>] do_syscall_64+0x94/0x1a0 [<0>] entry_SYSCALL_64_after_hwframe+0x6e/0x76 I wrote an fstest to reproduce this deadlock without my replacement lock and verified that the deadlock exists with our existing locking. To fix this simply don't take the extent lock for the entire duration of the fiemap. This is safe in general because we keep track of where we are when we're searching the tree, so if an ordered extent updates in the middle of our fiemap call we'll still emit the correct extents because we know what offset we were on before. The only place we maintain the lock is searching delalloc. Since the delalloc stuff can change during writeback we want to lock the extent range so we have a consistent view of delalloc at the time we're checking to see if we need to set the delalloc flag. With this patch applied we no longer deadlock with my testcase. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-02-19btrfs: defrag: avoid unnecessary defrag caused by incorrect extent sizeQu Wenruo
[BUG] With the following file extent layout, defrag would do unnecessary IO and result more on-disk space usage. # mkfs.btrfs -f $dev # mount $dev $mnt # xfs_io -f -c "pwrite 0 40m" $mnt/foobar # sync # xfs_io -f -c "pwrite 40m 16k" $mnt/foobar # sync Above command would lead to the following file extent layout: item 6 key (257 EXTENT_DATA 0) itemoff 15816 itemsize 53 generation 7 type 1 (regular) extent data disk byte 298844160 nr 41943040 extent data offset 0 nr 41943040 ram 41943040 extent compression 0 (none) item 7 key (257 EXTENT_DATA 41943040) itemoff 15763 itemsize 53 generation 8 type 1 (regular) extent data disk byte 13631488 nr 16384 extent data offset 0 nr 16384 ram 16384 extent compression 0 (none) Which is mostly fine. We can allow the final 16K to be merged with the previous 40M, but it's upon the end users' preference. But if we defrag the file using the default parameters, it would result worse file layout: # btrfs filesystem defrag $mnt/foobar # sync item 6 key (257 EXTENT_DATA 0) itemoff 15816 itemsize 53 generation 7 type 1 (regular) extent data disk byte 298844160 nr 41943040 extent data offset 0 nr 8650752 ram 41943040 extent compression 0 (none) item 7 key (257 EXTENT_DATA 8650752) itemoff 15763 itemsize 53 generation 9 type 1 (regular) extent data disk byte 340787200 nr 33292288 extent data offset 0 nr 33292288 ram 33292288 extent compression 0 (none) item 8 key (257 EXTENT_DATA 41943040) itemoff 15710 itemsize 53 generation 8 type 1 (regular) extent data disk byte 13631488 nr 16384 extent data offset 0 nr 16384 ram 16384 extent compression 0 (none) Note the original 40M extent is still there, but a new 32M extent is created for no benefit at all. [CAUSE] There is an existing check to make sure we won't defrag a large enough extent (the threshold is by default 32M). But the check is using the length to the end of the extent: range_len = em->len - (cur - em->start); /* Skip too large extent */ if (range_len >= extent_thresh) goto next; This means, for the first 8MiB of the extent, the range_len is always smaller than the default threshold, and would not be defragged. But after the first 8MiB, the remaining part would fit the requirement, and be defragged. Such different behavior inside the same extent caused the above problem, and we should avoid different defrag decision inside the same extent. [FIX] Instead of using @range_len, just use @em->len, so that we have a consistent decision among the same file extent. Now with this fix, we won't touch the extent, thus not making it any worse. Reported-by: Filipe Manana <fdmanana@suse.com> Fixes: 0cb5950f3f3b ("btrfs: fix deadlock when reserving space during defrag") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-02-19drm/tests/drm_buddy: fix 32b buildMatthew Auld
Doesn't seem to compile on 32b, presumably due to u64 mod/division. Simplest is to just switch over to u32 here. Also make print modifiers consistent with that. Fixes: a64056bb5a32 ("drm/tests/drm_buddy: add alloc_contiguous test") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240215174431.285069-7-matthew.auld@intel.com Signed-off-by: Christian König <christian.koenig@amd.com>
2024-02-19ata: ahci_ceva: fix error handling for Xilinx GT PHY supportRadhey Shyam Pandey
Platform clock and phy error resources are not cleaned up in Xilinx GT PHY error path. To fix introduce the function ceva_ahci_platform_enable_resources() which is a customized version of ahci_platform_enable_resources() and inline with SATA IP programming sequence it does: - Assert SATA reset - Program PS GTR phy - Bring SATA by de-asserting the reset - Wait for GT lane PLL to be locked ceva_ahci_platform_enable_resources() is also used in the resume path as the same SATA programming sequence (as in probe) should be followed. Also cleanup the mixed usage of ahci_platform_enable_resources() and custom implementation in the probe function as both are not required. Fixes: 9a9d3abe24bb ("ata: ahci: ceva: Update the driver to support xilinx GT phy") Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-02-19ahci: asm1064: correct count of reported portsAndrey Jr. Melnikov
The ASM1064 SATA host controller always reports wrongly, that it has 24 ports. But in reality, it only has four ports. before: ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst after: ahci 0000:04:00.0: ASM1064 has only four ports ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst Signed-off-by: "Andrey Jr. Melnikov" <temnota.am@gmail.com> Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-02-19selftests: bonding: set active slave to primary eth1 specificallyHangbin Liu
In bond priority testing, we set the primary interface to eth1 and add eth0,1,2 to bond in serial. This is OK in normal times. But when in debug kernel, the bridge port that eth0,1,2 connected would start slowly (enter blocking, forwarding state), which caused the primary interface down for a while after enslaving and active slave changed. Here is a test log from Jakub's debug test[1]. [ 400.399070][ T50] br0: port 1(s0) entered disabled state [ 400.400168][ T50] br0: port 4(s2) entered disabled state [ 400.941504][ T2791] bond0: (slave eth0): making interface the new active one [ 400.942603][ T2791] bond0: (slave eth0): Enslaving as an active interface with an up link [ 400.943633][ T2766] br0: port 1(s0) entered blocking state [ 400.944119][ T2766] br0: port 1(s0) entered forwarding state [ 401.128792][ T2792] bond0: (slave eth1): making interface the new active one [ 401.130771][ T2792] bond0: (slave eth1): Enslaving as an active interface with an up link [ 401.131643][ T69] br0: port 2(s1) entered blocking state [ 401.132067][ T69] br0: port 2(s1) entered forwarding state [ 401.346201][ T2793] bond0: (slave eth2): Enslaving as a backup interface with an up link [ 401.348414][ T50] br0: port 4(s2) entered blocking state [ 401.348857][ T50] br0: port 4(s2) entered forwarding state [ 401.519669][ T250] bond0: (slave eth0): link status definitely down, disabling slave [ 401.526522][ T250] bond0: (slave eth1): link status definitely down, disabling slave [ 401.526986][ T250] bond0: (slave eth2): making interface the new active one [ 401.629470][ T250] bond0: (slave eth0): link status definitely up [ 401.630089][ T250] bond0: (slave eth1): link status definitely up [...] # TEST: prio (active-backup ns_ip6_target primary_reselect 1) [FAIL] # Current active slave is eth2 but not eth1 Fix it by setting active slave to primary slave specifically before testing. [1] https://netdev-3.bots.linux.dev/vmksft-bonding-dbg/results/464301/1-bond-options-sh/stdout Fixes: 481b56e0391e ("selftests: bonding: re-format bond option tests") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-19serial: amba-pl011: Fix DMA transmission in RS485 modeLino Sanfilippo
When DMA is used in RS485 mode make sure that the UARTs tx section is enabled before the DMA buffers are queued for transmission. Cc: stable@vger.kernel.org Fixes: 8d479237727c ("serial: amba-pl011: add RS485 support") Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240216224709.9928-2-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-19serial: stm32: do not always set SER_RS485_RX_DURING_TX if RS485 is enabledLino Sanfilippo
Before commit 07c30ea5861f ("serial: Do not hold the port lock when setting rx-during-tx GPIO") the SER_RS485_RX_DURING_TX flag was only set if the rx-during-tx mode was not controlled by a GPIO. Now the flag is set unconditionally when RS485 is enabled. This results in an incorrect setting if the rx-during-tx GPIO is not asserted. Fix this by setting the flag only if the rx-during-tx mode is not controlled by a GPIO and thus restore the correct behaviour. Cc: stable@vger.kernel.org # 6.6+ Fixes: 07c30ea5861f ("serial: Do not hold the port lock when setting rx-during-tx GPIO") Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240216224709.9928-1-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-19tty: hvc: Don't enable the RISC-V SBI console by defaultPalmer Dabbelt
The new SBI console has the same problem as the old one: there's only one shared backing hardware and no synchronization, so the two drivers end up stepping on each other. This was the same issue the old SBI-0.1 console drivers had, but that was disabled by default when SBI-0.1 was. So just mark the new driver as nonportable. Reported-by: Emil Renner Berthing <kernel@esmil.dk> Fixes: 88ead68e764c ("tty: Add SBI debug console support to HVC SBI driver") Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240214153429.16484-2-palmer@rivosinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-19drm/meson: Don't remove bridges which are created by other driversMartin Blumenstingl
Stop calling drm_bridge_remove() for bridges allocated/managed by other drivers in the remove paths of meson_encoder_{cvbs,dsi,hdmi}. drm_bridge_remove() unregisters the bridge so it cannot be used anymore. Doing so for bridges we don't own can lead to the video pipeline not being able to come up after -EPROBE_DEFER of the VPU because we're unregistering a bridge that's managed by another driver. The other driver doesn't know that we have unregistered it's bridge and on subsequent .probe() we're not able to find those bridges anymore (since nobody re-creates them). This fixes probe errors on Meson8b boards with the CVBS outputs enabled. Fixes: 09847723c12f ("drm/meson: remove drm bridges at aggregate driver unbind time") Fixes: 42dcf15f901c ("drm/meson: add DSI encoder") Cc: <stable@vger.kernel.org> Reported-by: Steve Morvai <stevemorvai@hotmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Steve Morvai <stevemorvai@hotmail.com> Link: https://lore.kernel.org/r/20240215220442.1343152-1-martin.blumenstingl@googlemail.com Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240215220442.1343152-1-martin.blumenstingl@googlemail.com
2024-02-19MAINTAINERS: Drop myself as maintainer of TYPEC port controller driversGuenter Roeck
I am no longer involved in Type-C development and not really current on its status and progress. Recently I have been doing more damage than good. It is time to go. Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240215202039.1982539-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-19usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBsKrishna Kurapati
It is observed sometimes when tethering is used over NCM with Windows 11 as host, at some instances, the gadget_giveback has one byte appended at the end of a proper NTB. When the NTB is parsed, unwrap call looks for any leftover bytes in SKB provided by u_ether and if there are any pending bytes, it treats them as a separate NTB and parses it. But in case the second NTB (as per unwrap call) is faulty/corrupt, all the datagrams that were parsed properly in the first NTB and saved in rx_list are dropped. Adding a few custom traces showed the following: [002] d..1 7828.532866: dwc3_gadget_giveback: ep1out: req 000000003868811a length 1025/16384 zsI ==> 0 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb toprocess: 1025 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb seq: 0xce67 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x400 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb ndp_len: 0x10 [002] d..1 7828.532869: ncm_unwrap_ntb: K: Parsed NTB with 1 frames In this case, the giveback is of 1025 bytes and block length is 1024. The rest 1 byte (which is 0x00) won't be parsed resulting in drop of all datagrams in rx_list. Same is case with packets of size 2048: [002] d..1 7828.557948: dwc3_gadget_giveback: ep1out: req 0000000011dfd96e length 2049/16384 zsI ==> 0 [002] d..1 7828.557949: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.557950: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x800 Lecroy shows one byte coming in extra confirming that the byte is coming in from PC: Transfer 2959 - Bytes Transferred(1025) Timestamp((18.524 843 590) - Transaction 8391 - Data(1025 bytes) Timestamp(18.524 843 590) --- Packet 4063861 Data(1024 bytes) Duration(2.117us) Idle(14.700ns) Timestamp(18.524 843 590) --- Packet 4063863 Data(1 byte) Duration(66.160ns) Time(282.000ns) Timestamp(18.524 845 722) According to Windows driver, no ZLP is needed if wBlockLength is non-zero, because the non-zero wBlockLength has already told the function side the size of transfer to be expected. However, there are in-market NCM devices that rely on ZLP as long as the wBlockLength is multiple of wMaxPacketSize. To deal with such devices, it pads an extra 0 at end so the transfer is no longer multiple of wMaxPacketSize. Cc: <stable@vger.kernel.org> Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added") Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20240205074650.200304-1-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-19Revert "usb: typec: tcpm: reset counter when enter into unattached state ↵Ondrej Jirman
after try role" The reverted commit makes the state machine only ever go from SRC_ATTACH_WAIT to SNK_TRY in endless loop when toggling. After revert it goes to SRC_ATTACHED after initially trying SNK_TRY earlier, as it should for toggling to ever detect the power source mode and the port is again able to provide power to attached power sinks. This reverts commit 2d6d80127006ae3da26b1f21a65eccf957f2d1e5. Cc: stable@vger.kernel.org Fixes: 2d6d80127006 ("usb: typec: tcpm: reset counter when enter into unattached state after try role") Signed-off-by: Ondrej Jirman <megi@xff.cz> Link: https://lore.kernel.org/r/20240217162023.1719738-1-megi@xff.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-19usb: gadget: omap_udc: fix USB gadget regression on Palm TEAaro Koskinen
When upgrading from 6.1 LTS to 6.6 LTS, I noticed the ethernet gadget stopped working on Palm TE. Commit 8825acd7cc8a ("ARM: omap1: remove dead code") deleted Palm TE from machine_without_vbus_sense(), although the board is still used. Fix that. Fixes: 8825acd7cc8a ("ARM: omap1: remove dead code") Cc: stable <stable@kernel.org> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240217192042.GA372205@darkstar.musicnaut.iki.fi Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-19usb: dwc3: gadget: Don't disconnect if not startedThinh Nguyen
Don't go through soft-disconnection sequence if the controller hasn't started. Otherwise, there will be timeout and warning reports from the soft-disconnection flow. Cc: stable@vger.kernel.org Fixes: 61a348857e86 ("usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/linux-usb/20240215233536.7yejlj3zzkl23vjd@synopsys.com/T/#mb0661cd5f9272602af390c18392b9a36da4f96e6 Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/e3be9b929934e0680a6f4b8f6eb11b18ae9c7e07.1708043922.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-19usb: cdns3: fix memory double free when handle zero packetFrank Li
829 if (request->complete) { 830 spin_unlock(&priv_dev->lock); 831 usb_gadget_giveback_request(&priv_ep->endpoint, 832 request); 833 spin_lock(&priv_dev->lock); 834 } 835 836 if (request->buf == priv_dev->zlp_buf) 837 cdns3_gadget_ep_free_request(&priv_ep->endpoint, request); Driver append an additional zero packet request when queue a packet, which length mod max packet size is 0. When transfer complete, run to line 831, usb_gadget_giveback_request() will free this requestion. 836 condition is true, so cdns3_gadget_ep_free_request() free this request again. Log: [ 1920.140696][ T150] BUG: KFENCE: use-after-free read in cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.140696][ T150] [ 1920.151837][ T150] Use-after-free read at 0x000000003d1cd10b (in kfence-#36): [ 1920.159082][ T150] cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.164988][ T150] cdns3_transfer_completed+0x438/0x5f8 [cdns3] Add check at line 829, skip call usb_gadget_giveback_request() if it is additional zero length packet request. Needn't call usb_gadget_giveback_request() because it is allocated in this driver. Cc: stable@vger.kernel.org Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20240202154217.661867-2-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-19usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()Frank Li
... cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); list_del_init(&priv_req->list); ... 'priv_req' actually free at cdns3_gadget_ep_free_request(). But list_del_init() use priv_req->list after it. [ 1542.642868][ T534] BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xd4 [ 1542.642868][ T534] [ 1542.653162][ T534] Use-after-free read at 0x000000009ed0ba99 (in kfence-#3): [ 1542.660311][ T534] __list_del_entry_valid+0x10/0xd4 [ 1542.665375][ T534] cdns3_gadget_ep_disable+0x1f8/0x388 [cdns3] [ 1542.671571][ T534] usb_ep_disable+0x44/0xe4 [ 1542.675948][ T534] ffs_func_eps_disable+0x64/0xc8 [ 1542.680839][ T534] ffs_func_set_alt+0x74/0x368 [ 1542.685478][ T534] ffs_func_disable+0x18/0x28 Move list_del_init() before cdns3_gadget_ep_free_request() to resolve this problem. Cc: stable@vger.kernel.org Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20240202154217.661867-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-19usb: roles: don't get/set_role() when usb_role_switch is unregisteredXu Yang
There is a possibility that usb_role_switch device is unregistered before the user put usb_role_switch. In this case, the user may still want to get/set_role() since the user can't sense the changes of usb_role_switch. This will add a flag to show if usb_role_switch is already registered and avoid unwanted behaviors. Fixes: fde0aa6c175a ("usb: common: Small class for USB role switches") cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240129093739.2371530-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-19usb: roles: fix NULL pointer issue when put module's referenceXu Yang
In current design, usb role class driver will get usb_role_switch parent's module reference after the user get usb_role_switch device and put the reference after the user put the usb_role_switch device. However, the parent device of usb_role_switch may be removed before the user put the usb_role_switch. If so, then, NULL pointer issue will be met when the user put the parent module's reference. This will save the module pointer in structure of usb_role_switch. Then, we don't need to find module by iterating long relations. Fixes: 5c54fcac9a9d ("usb: roles: Take care of driver module reference counting") cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240129093739.2371530-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-19usb: cdnsp: fixed issue with incorrect detecting CDNSP family controllersPawel Laszczak
Cadence have several controllers from 0x000403xx family but current driver suuport detecting only one with DID equal 0x0004034E. It causes that if someone uses different CDNSP controller then driver will use incorrect version and register space. Patch fix this issue. cc: stable@vger.kernel.org Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20240215121609.259772-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-19usb: cdnsp: blocked some cdns3 specific codePawel Laszczak
host.c file has some parts of code that were introduced for CDNS3 driver and should not be used with CDNSP driver. This patch blocks using these parts of codes by CDNSP driver. These elements include: - xhci_plat_cdns3_xhci object - cdns3 specific XECP_PORT_CAP_REG register - cdns3 specific XECP_AUX_CTRL_REG1 register cc: stable@vger.kernel.org Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20240206104018.48272-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 21:58:26 +0000