summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-02Merge branch 'tipc-scalable-broadcast-NACK'David S. Miller
Jon Maloy says: ==================== tipc: improve broadcast NACK mechanism The broadcast protocol has turned out to not scale well beyond 70-80 nodes, while it is now possible to build TIPC clusters of at least ten times that size. This commit series improves the NACK/retransmission mechanism of the broadcast protocol to make is at scalable as the rest of TIPC. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02tipc: send broadcast nack directly upon sequence gap detectionJon Paul Maloy
Because of the risk of an excessive number of NACK messages and retransissions, receivers have until now abstained from sending broadcast NACKS directly upon detection of a packet sequence number gap. We have instead relied on such gaps being detected by link protocol STATE message exchange, something that by necessity delays such detection and subsequent retransmissions. With the introduction of unicast NACK transmission and rate control of retransmissions we can now remove this limitation. We now allow receiving nodes to send NACKS immediately, while coordinating the permission to do so among the nodes in order to avoid NACK storms. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02tipc: rate limit broadcast retransmissionsJon Paul Maloy
As cluster sizes grow, so does the amount of identical or overlapping broadcast NACKs generated by the packet receivers. This often leads to 'NACK crunches' resulting in huge numbers of redundant retransmissions of the same packet ranges. In this commit, we introduce rate control of broadcast retransmissions, so that a retransmitted range cannot be retransmitted again until after at least 10 ms. This reduces the frequency of duplicate, redundant retransmissions by an order of magnitude, while having a significant positive impact on overall throughput and scalability. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02tipc: transfer broadcast nacks in link state messagesJon Paul Maloy
When we send broadcasts in clusters of more 70-80 nodes, we sometimes see the broadcast link resetting because of an excessive number of retransmissions. This is caused by a combination of two factors: 1) A 'NACK crunch", where loss of broadcast packets is discovered and NACK'ed by several nodes simultaneously, leading to multiple redundant broadcast retransmissions. 2) The fact that the NACKS as such also are sent as broadcast, leading to excessive load and packet loss on the transmitting switch/bridge. This commit deals with the latter problem, by moving sending of broadcast nacks from the dedicated BCAST_PROTOCOL/NACK message type to regular unicast LINK_PROTOCOL/STATE messages. We allocate 10 unused bits in word 8 of the said message for this purpose, and introduce a new capability bit, TIPC_BCAST_STATE_NACK in order to keep the change backwards compatible. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02net: stmmac: dwmac-rk: add pd_gmac support for rk3399David Wu
Add the gmac power domain support for rk3399, in order to save more power consumption. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02net: stmmac: dwmac-rk: fixes the gmac resume after PD on/offRoger Chen
GMAC Power Domain(PD) will be disabled during suspend. That will causes GRF registers reset. So corresponding GRF registers for GMAC must be setup again. Signed-off-by: Roger Chen <roger.chen@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02net: stmmac: dwmac-rk: add rk3366 & rk3399 specific dataRoger Chen
Add constants and callback functions for the dwmac on rk3228/rk3229 socs. As can be seen, the base structure is the same, only registers and the bits in them moved slightly. Signed-off-by: Roger Chen <roger.chen@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02rxrpc: Fix uninitialised variable warningDavid Howells
Fix the following uninitialised variable warning: ../net/rxrpc/call_event.c: In function 'rxrpc_process_call': ../net/rxrpc/call_event.c:879:58: warning: 'error' may be used uninitialized in this function [-Wmaybe-uninitialized] _debug("post net error %d", error); ^ Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-02rxrpc: fix undefined behavior in rxrpc_mark_call_releasedArnd Bergmann
gcc -Wmaybe-initialized correctly points out a newly introduced bug through which we can end up calling rxrpc_queue_call() for a dead connection: net/rxrpc/call_object.c: In function 'rxrpc_mark_call_released': net/rxrpc/call_object.c:600:5: error: 'sched' may be used uninitialized in this function [-Werror=maybe-uninitialized] This sets the 'sched' variable to zero to restore the previous behavior. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: f5c17aaeb2ae ("rxrpc: Calls should only have one terminal state") Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-02switchdev: Fix return value of switchdev_port_fdb_dump().Rosen, Rami
This patch fixes the retun value of switchdev_port_fdb_dump() when CONFIG_NET_SWITCHDEV is not set. This avoids getting "warning: return makes integer from pointer without a cast [-Wint-conversion]" when building when CONFIG_NET_SWITCHDEV is not set under several compiler versions. This warning is due to commit d297653dd6f07afbe7e6c702a4bcd7615680002e ("rtnetlink: fdb dump: optimize by saving last interface markers"). Signed-off-by: Rami Rosen <rami.rosen@intel.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02Merge branch 'bpf-perf-hw-sw-events'David S. Miller
Alexei Starovoitov says: ==================== perf, bpf: add support for bpf in sw/hw perf_events this patch set is a follow up to the discussion: https://lkml.kernel.org/r/20160804142853.GO6862%20()%20twins%20!%20programming%20!%20kicks-ass%20!%20net It turned out to be simpler than what we discussed. Patches 1-3 is bpf-side prep for the main patch 4 that adds bpf program as an overflow_handler to sw and hw perf_events. Patches 5 and 6 are examples from myself and Brendan. Peter, to implement your suggestion to add ifdef CONFIG_BPF_SYSCALL inside struct perf_event, I had to shuffle ifdefs in events/core.c Please double check whether that is what you wanted to see. v2->v3: fixed few more minor issues v1->v2: fixed issues spotted by Peter and Daniel. ==================== Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02samples/bpf: add sampleip exampleBrendan Gregg
sample instruction pointer and frequency count in a BPF map Signed-off-by: Brendan Gregg <bgregg@netflix.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02samples/bpf: add perf_event+bpf exampleAlexei Starovoitov
The bpf program is called 50 times a second and does hashmap[kern&user_stackid]++ It's primary purpose to check that key bpf helpers like map lookup, update, get_stackid, trace_printk and ctx access are all working. It checks: - PERF_COUNT_HW_CPU_CYCLES on all cpus - PERF_COUNT_HW_CPU_CYCLES for current process and inherited perf_events to children - PERF_COUNT_SW_CPU_CLOCK on all cpus - PERF_COUNT_SW_CPU_CLOCK for current process Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02perf, bpf: add perf events core support for BPF_PROG_TYPE_PERF_EVENT programsAlexei Starovoitov
Allow attaching BPF_PROG_TYPE_PERF_EVENT programs to sw and hw perf events via overflow_handler mechanism. When program is attached the overflow_handlers become stacked. The program acts as a filter. Returning zero from the program means that the normal perf_event_output handler will not be called and sampling event won't be stored in the ring buffer. The overflow_handler_context==NULL is an additional safety check to make sure programs are not attached to hw breakpoints and watchdog in case other checks (that prevent that now anyway) get accidentally relaxed in the future. The program refcnt is incremented in case perf_events are inhereted when target task is forked. Similar to kprobe and tracepoint programs there is no ioctl to detach the program or swap already attached program. The user space expected to close(perf_event_fd) like it does right now for kprobe+bpf. That restriction simplifies the code quite a bit. The invocation of overflow_handler in __perf_event_overflow() is now done via READ_ONCE, since that pointer can be replaced when the program is attached while perf_event itself could have been active already. There is no need to do similar treatment for event->prog, since it's assigned only once before it's accessed. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02bpf: perf_event progs should only use preallocated mapsAlexei Starovoitov
Make sure that BPF_PROG_TYPE_PERF_EVENT programs only use preallocated hash maps, since doing memory allocation in overflow_handler can crash depending on where nmi got triggered. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02bpf: introduce BPF_PROG_TYPE_PERF_EVENT program typeAlexei Starovoitov
Introduce BPF_PROG_TYPE_PERF_EVENT programs that can be attached to HW and SW perf events (PERF_TYPE_HARDWARE and PERF_TYPE_SOFTWARE correspondingly in uapi/linux/perf_event.h) The program visible context meta structure is struct bpf_perf_event_data { struct pt_regs regs; __u64 sample_period; }; which is accessible directly from the program: int bpf_prog(struct bpf_perf_event_data *ctx) { ... ctx->sample_period ... ... ctx->regs.ip ... } The bpf verifier rewrites the accesses into kernel internal struct bpf_perf_event_data_kern which allows changing struct perf_sample_data without affecting bpf programs. New fields can be added to the end of struct bpf_perf_event_data in the future. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02bpf: support 8-byte metafield accessAlexei Starovoitov
The verifier supported only 4-byte metafields in struct __sk_buff and struct xdp_md. The metafields in upcoming struct bpf_perf_event are 8-byte to match register width in struct pt_regs. Teach verifier to recognize 8-byte metafield access. The patch doesn't affect safety of sockets and xdp programs. They check for 4-byte only ctx access before these conditions are hit. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01mISDN: mark symbols static where possibleBaoyou Xie
We get a few warnings when building kernel with W=1: drivers/isdn/hardware/mISDN/hfcmulti.c:568:1: warning: no previous declaration for 'enablepcibridge' [-Wmissing-declarations] drivers/isdn/hardware/mISDN/hfcmulti.c:574:1: warning: no previous declaration for 'disablepcibridge' [-Wmissing-declarations] drivers/isdn/hardware/mISDN/hfcmulti.c:580:1: warning: no previous declaration for 'readpcibridge' [-Wmissing-declarations] drivers/isdn/hardware/mISDN/hfcmulti.c:608:1: warning: no previous declaration for 'writepcibridge' [-Wmissing-declarations] drivers/isdn/hardware/mISDN/hfcmulti.c:638:1: warning: no previous declaration for 'cpld_set_reg' [-Wmissing-declarations] drivers/isdn/hardware/mISDN/hfcmulti.c:645:1: warning: no previous declaration for 'cpld_write_reg' [-Wmissing-declarations] drivers/isdn/hardware/mISDN/hfcmulti.c:657:1: warning: no previous declaration for 'cpld_read_reg' [-Wmissing-declarations] drivers/isdn/hardware/mISDN/hfcmulti.c:674:1: warning: no previous declaration for 'vpm_write_address' [-Wmissing-declarations] drivers/isdn/hardware/mISDN/hfcmulti.c:681:1: warning: no previous declaration for 'vpm_read_address' [-Wmissing-declarations] drivers/isdn/hardware/mISDN/hfcmulti.c:695:1: warning: no previous declaration for 'vpm_in' [-Wmissing-declarations] drivers/isdn/hardware/mISDN/hfcmulti.c:716:1: warning: no previous declaration for 'vpm_out' [-Wmissing-declarations] drivers/isdn/hardware/mISDN/hfcmulti.c:1028:1: warning: no previous declaration for 'plxsd_checksync' [-Wmissing-declarations] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01net: emac: emac gigabit ethernet controller driverTimur Tabi
Add support for the Qualcomm Technologies, Inc. EMAC gigabit Ethernet controller. This driver supports the following features: 1) Checksum offload. 2) Interrupt coalescing support. 3) SGMII phy. 4) phylib interface for external phy Based on original work by Niranjana Vishwanathapura <nvishwan@codeaurora.org> Gilad Avidov <gavidov@codeaurora.org> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01net: dsa: remove ds_to_privVivien Didelot
Access the priv member of the dsa_switch structure directly, instead of having an unnecessary helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01Merge branch 'br-next'David S. Miller
Nikolay Aleksandrov says: ==================== net: bridge: add per-port unknown multicast flood control The first patch prepares the forwarding path by having the exact packet type passed down so we can later filter based on it and the per-port unknown mcast flood flag introduced in the second patch. It is similar to how the per-port unknown unicast flood flag works. Nice side-effects of patch 01 are the slight reduction of tests in the fast-path and a few minor checkpatch fixes. v3: don't change br_auto_mask as that will change user-visible behaviour v2: make pkt_type an enum as per Stephen's comment ==================== Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01net: bridge: add per-port multicast flood flagNikolay Aleksandrov
Add a per-port flag to control the unknown multicast flood, similar to the unknown unicast flood flag and break a few long lines in the netlink flag exports. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01net: bridge: change unicast boolean to exact pkt_typeNikolay Aleksandrov
Remove the unicast flag and introduce an exact pkt_type. That would help us for the upcoming per-port multicast flood flag and also slightly reduce the tests in the input fast path. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01rtnetlink: fdb dump: optimize by saving last interface markersRoopa Prabhu
fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01rps: flow_dissector: Add the const for the parameter of flow_keys_have_l4Gao Feng
Add the const for the parameter of flow_keys_have_l4 for the readability. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01rxrpc: Don't expose skbs to in-kernel users [ver #2]David Howells
Don't expose skbs to in-kernel users, such as the AFS filesystem, but instead provide a notification hook the indicates that a call needs attention and another that indicates that there's a new call to be collected. This makes the following possibilities more achievable: (1) Call refcounting can be made simpler if skbs don't hold refs to calls. (2) skbs referring to non-data events will be able to be freed much sooner rather than being queued for AFS to pick up as rxrpc_kernel_recv_data will be able to consult the call state. (3) We can shortcut the receive phase when a call is remotely aborted because we don't have to go through all the packets to get to the one cancelling the operation. (4) It makes it easier to do encryption/decryption directly between AFS's buffers and sk_buffs. (5) Encryption/decryption can more easily be done in the AFS's thread contexts - usually that of the userspace process that issued a syscall - rather than in one of rxrpc's background threads on a workqueue. (6) AFS will be able to wait synchronously on a call inside AF_RXRPC. To make this work, the following interface function has been added: int rxrpc_kernel_recv_data( struct socket *sock, struct rxrpc_call *call, void *buffer, size_t bufsize, size_t *_offset, bool want_more, u32 *_abort_code); This is the recvmsg equivalent. It allows the caller to find out about the state of a specific call and to transfer received data into a buffer piecemeal. afs_extract_data() and rxrpc_kernel_recv_data() now do all the extraction logic between them. They don't wait synchronously yet because the socket lock needs to be dealt with. Five interface functions have been removed: rxrpc_kernel_is_data_last() rxrpc_kernel_get_abort_code() rxrpc_kernel_get_error_number() rxrpc_kernel_free_skb() rxrpc_kernel_data_consumed() As a temporary hack, sk_buffs going to an in-kernel call are queued on the rxrpc_call struct (->knlrecv_queue) rather than being handed over to the in-kernel user. To process the queue internally, a temporary function, temp_deliver_data() has been added. This will be replaced with common code between the rxrpc_recvmsg() path and the kernel_rxrpc_recv_data() path in a future patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01net: pegasus: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar
The workqueue "pegasus_workqueue" queues a single work item per pegasus instance and hence it doesn't require execution ordering. Hence, alloc_workqueue has been used to replace the deprecated create_singlethread_workqueue instance. The WQ_MEM_RECLAIM flag has been set to ensure forward progress under memory pressure since it's a network driver. Since there are fixed number of work items, explicit concurrency limit is unnecessary here. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Petko Manolov <petkan@mip-labs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01bonding: Remove deprecated create_singlethread_workqueueBhaktipriya Shridhar
alloc_ordered_workqueue() with WQ_MEM_RECLAIM set, replaces deprecated create_singlethread_workqueue(). This is the identity conversion. The workqueue "wq" queues multiple work items viz &bond->mcast_work, &nnw->work, &bond->mii_work, &bond->arp_work, &bond->alb_work, &bond->mii_work, &bond->ad_work, &bond->slave_arr_work which require strict execution ordering. Hence, an ordered dedicated workqueue has been used. Since, it is a network driver, WQ_MEM_RECLAIM has been set to ensure forward progress under memory pressure. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01sky2: use napi_complete_donestephen hemminger
Update the sky2 driver to pass number of packets done to NAPI. The driver was never updated when napi_complete_done was added. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01l2tp: make nla_policy conststephen hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01tcp: make nla_policy conststephen hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01ila: make nla_policy conststephen hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01fou: make nla_policy conststephen hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01netns: make nla_policy conststephen hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01batman: make netlink attributes conststephen hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01drop_monitor: make genl_multicast_group conststephen hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01net: make genetlink ctrl ops conststephen hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01Merge branch 'stmmac-STM32F429'David S. Miller
Alexandre TORGUE says: ==================== Add Ethernet support on STM32F429 STM32F429 Chip embeds a Synopsys 3.50a MAC IP. This series enhance current stmmac driver to control it (code already available) and adds basic glue for STM32F429 chip. Changes since v5: -Fix typo in bindings documentation patch. -Change clocks names in stm32-dwmac glue driver / Documentation. -After rebase, stm32 ethernet node is now available. It has to be updated according to new clocks names. Changes since v4: -Fix dirty copy/past in bindings documentation patch. Changes since v3: -Fix "tx-clk" and "rx-clk" as required clocks. Driver and bindings are modified. Changes since v2: -Fix alphabetic order in Kconfig and Makefile. -Improve code according to Joachim review. -Binding: remove useless entry. Changes since v1: -Fix Kbuild issue in Kconfig. -Remove init/exit callbacks. Suspend/Resume and remove driver is no more driven in stmmac_pltfr but directly in dwmac-stm32 glue driver. -Take into account Joachim review. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01net: ethernet: stmmac: add support of Synopsys 3.50a MAC IPAlexandre TORGUE
Adds support of Synopsys 3.50a MAC IP in stmmac driver. Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Tested-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01Documentation: Bindings: Add STM32 DWMAC glueAlexandre TORGUE
Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre TORGUE <alexandre.torgue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01net: ethernet: dwmac: add Ethernet glue logic for stm32 chipAlexandre TORGUE
stm324xx family chips support Synopsys MAC 3.510 IP. This patch adds settings for logical glue logic: -clocks -mode selection MII or RMII. Reviewed-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Tested-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01mpls: get rid of trivial returnsstephen hemminger
return at end of function is useless. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01net: xgene: fix backward compatibility fixArnd Bergmann
A bugfix for backward compatibility handling introduced undefined behavior for the case that of_parse_phandle() does not return a valid entry, as "gcc -Wmaybe-unused" reports: drivers/net/ethernet/apm/xgene/xgene_enet_hw.c: In function 'xgene_enet_phy_connect': drivers/net/ethernet/apm/xgene/xgene_enet_hw.c:776:6: error: 'phy_dev' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/net/ethernet/apm/xgene/xgene_enet_hw.c: In function 'xgene_enet_mdio_config': drivers/net/ethernet/apm/xgene/xgene_enet_hw.c:776:6: error: 'phy_dev' may be used uninitialized in this function [-Werror=maybe-uninitialized] We can work around this by removing the check for zero "np", as of_phy_connect() will correctly handle a NULL argument so we fall back into the normal error handling case. Note that I had previously fixed another bug that resulted in the exact same warning, but this is a different problem that was introduced after my original fix. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 03377e381bf4 ("drivers: net: xgene: Fix backward compatibility") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01r8152: fix the coding style with checkpatch.plhayeswang
check the coding style with checkpatch.pl and fix the warnings and errors. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31Merge branch 'asix-pm-improvements'David S. Miller
Robert Foss says: ==================== net/usb: asix driver improvements This is a resubmission of v3, since the netdev mailinlist was not sent the previous submission. This series improves power management of the asix driver. - Suspend/resume support is improved to save needed registers. - Device disconnection is improved. - Fixes AX88772x resume failures - Implementes IEEE 802.3 spec section "22.2.4.1.1 Reset" correctly - Fixes AX_CMD_WRITE_MEDIUM_MODE being set incorrectly Changes since v1: - Added proper metadata tags to series. - Added two more patches to series. Changes since v2: - Added coverletter - Tested patches on AX88772A/AX88772B/AX88178/AX88179 hardware ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: asix: autoneg will set WRITE_MEDIUM regRobert Foss
From: Grant Grundler <grundler@chromium.org> The miii_nway_restart() causes a PHY link change activity and ax88772_link_reset will be called. link_reset will set AX_CMD_WRITE_MEDIUM_MODE register correctly. The asix_write_medium_mode in reset() fills in a default value to the register which may be different from the negotiation result. So do this first. Ignore the ret value since it's ignored in XXX_link_reset() functions. Signed-off-by: Grant Grundler <grundler@google.com> Signed-off-by: Robert Foss <robert.foss@collabora.com> Tested-by: Robert Foss <robert.foss@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: asix: see 802.3 spec for phy resetRobert Foss
From: Grant Grundler <grundler@chromium.org> https://lkml.org/lkml/2014/11/11/947 Ben Hutchings is correct. IEEE 802.3 spec section "22.2.4.1.1 Reset" requires up to 500ms delay. Mitigate the "max" delay by polling the phy until BCM_RESET bit is clear. Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: Robert Foss <robert.foss@collabora.com> Tested-by: Robert Foss <robert.foss@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: asix: Fix AX88772x resume failuresRobert Foss
From: Allan Chou <allan@asix.com.tw> The change fixes AX88772x resume failure by - Restore incorrect AX88772A PHY registers when resetting - Need to stop MAC operation when suspending - Need to restart MII when restoring PHY Signed-off-by: Allan Chou <allan@asix.com.tw> Signed-off-by: Robert Foss <robert.foss@collabora.com> Tested-by: Robert Foss <robert.foss@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: asix: Avoid looping when the device is disconnectedRobert Foss
From: Vincent Palatin <vpalatin@chromium.org> Check the answers from the USB stack and avoid re-sending multiple times the request if the device has disappeared. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Robert Foss <robert.foss@collabora.com> Tested-by: Robert Foss <robert.foss@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: asix: Add in_pm parameterRobert Foss
From: Freddy Xin <freddy@asix.com.tw> In order to R/W registers in suspend/resume functions, in_pm flags are added to some functions to determine whether the nopm version of usb functions is called. Save BMCR and ANAR PHY registers in suspend function and restore them in resume function. Reset HW in resume function to ensure the PHY works correctly. Signed-off-by: Freddy Xin <freddy@asix.com.tw> Signed-off-by: Robert Foss <robert.foss@collabora.com> Tested-by: Robert Foss <robert.foss@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 22:32:46 +0000