summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-21net/mlx5e: Remove leftovers from old XSK queues enumerationTariq Toukan
Before the cited commit, for N channels, a dedicated set of N queues was created to support XSK, in indices [N, 2N-1], doubling the number of queues. In addition, changing the number of channels was prohibited, as it would shift the indices. Remove these two leftovers, as we moved XSK to a new queueing scheme, starting from index 0. Fixes: 3db4c85cde7a ("net/mlx5e: xsk: Use queue indices starting from 0 for XSK queues") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-21net/mlx5e: Offload rule only when all encaps are validChris Mi
The cited commit adds a for loop to support multiple encapsulations. But it only checks if the last encap is valid. Fix it by setting slow path flag when one of the encap is invalid. Fixes: f493f15534ec ("net/mlx5e: Move flow attr reformat action bit to per dest flags") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-21net/mlx5e: Fix missing alignment in size of MTT/KLM entriesTariq Toukan
In the cited patch, an alignment required by the HW spec was mistakenly dropped. Bring it back to fix error completions like the below: mlx5_core 0000:00:08.0 eth2: Error cqe on cqn 0x40b, ci 0x0, qn 0x104f, opcode 0xd, syndrome 0x2, vendor syndrome 0x68 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 86 00 68 02 25 00 10 4f 00 00 bb d2 WQE DUMP: WQ size 1024 WQ cur size 0, WQE index 0x0, len: 192 00000000: 00 00 00 25 00 10 4f 0c 00 00 00 00 00 18 2e 00 00000010: 90 00 00 00 00 02 00 00 00 00 00 00 20 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000080: 08 00 00 00 48 6a 00 02 08 00 00 00 0e 10 00 02 00000090: 08 00 00 00 0c db 00 02 08 00 00 00 0e 82 00 02 000000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 000000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: 9f123f740428 ("net/mlx5e: Improve MTT/KSM alignment") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-21net/mlx5: Fix sync reset event handler error flowMoshe Shemesh
When sync reset now event handling fails on mlx5_pci_link_toggle() then no reset was done. However, since mlx5_cmd_fast_teardown_hca() was already done, the firmware function is closed and the driver is left without firmware functionality. Fix it by setting device error state and reopen the firmware resources. Reopening is done by the thread that was called for devlink reload fw_activate as it already holds the devlink lock. Fixes: 5ec697446f46 ("net/mlx5: Add support for devlink reload action fw activate") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-21net/mlx5: E-Switch, Set correctly vport destinationRoi Dayan
The cited commit moved from using reformat_id integer to packet_reformat pointer which introduced the possibility to null pointer dereference. When setting packet reformat flag and pkt_reformat pointer must exists so checking MLX5_ESW_DEST_ENCAP is not enough, we need to make sure the pkt_reformat is valid and check for MLX5_ESW_DEST_ENCAP_VALID. If the dest encap valid flag does not exists then pkt_reformat can be either invalid address or null. Also, to make sure we don't try to access invalid pkt_reformat set it to null when invalidated and invalidate it before calling add flow code as its logically more correct and to be safe. Fixes: 2b688ea5efde ("net/mlx5: Add flow steering actions to fs_cmd shim layer") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Chris Mi <cmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-21net/mlx5: Lag, avoid lockdep warningsEli Cohen
ldev->lock is used to serialize lag change operations. Since multiport eswtich functionality was added, we now change the mode dynamically. However, acquiring ldev->lock is not allowed as it could possibly lead to a deadlock as reported by the lockdep mechanism. [ 836.154963] WARNING: possible circular locking dependency detected [ 836.155850] 5.19.0-rc5_net_56b7df2 #1 Not tainted [ 836.156549] ------------------------------------------------------ [ 836.157418] handler1/12198 is trying to acquire lock: [ 836.158178] ffff888187d52b58 (&ldev->lock){+.+.}-{3:3}, at: mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core] [ 836.159575] [ 836.159575] but task is already holding lock: [ 836.160474] ffff8881d4de2930 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200 [ 836.161669] which lock already depends on the new lock. [ 836.162905] [ 836.162905] the existing dependency chain (in reverse order) is: [ 836.164008] -> #3 (&block->cb_lock){++++}-{3:3}: [ 836.164946] down_write+0x25/0x60 [ 836.165548] tcf_block_get_ext+0x1c6/0x5d0 [ 836.166253] ingress_init+0x74/0xa0 [sch_ingress] [ 836.167028] qdisc_create.constprop.0+0x130/0x5e0 [ 836.167805] tc_modify_qdisc+0x481/0x9f0 [ 836.168490] rtnetlink_rcv_msg+0x16e/0x5a0 [ 836.169189] netlink_rcv_skb+0x4e/0xf0 [ 836.169861] netlink_unicast+0x190/0x250 [ 836.170543] netlink_sendmsg+0x243/0x4b0 [ 836.171226] sock_sendmsg+0x33/0x40 [ 836.171860] ____sys_sendmsg+0x1d1/0x1f0 [ 836.172535] ___sys_sendmsg+0xab/0xf0 [ 836.173183] __sys_sendmsg+0x51/0x90 [ 836.173836] do_syscall_64+0x3d/0x90 [ 836.174471] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 836.175282] [ 836.175282] -> #2 (rtnl_mutex){+.+.}-{3:3}: [ 836.176190] __mutex_lock+0x6b/0xf80 [ 836.176830] register_netdevice_notifier+0x21/0x120 [ 836.177631] rtnetlink_init+0x2d/0x1e9 [ 836.178289] netlink_proto_init+0x163/0x179 [ 836.178994] do_one_initcall+0x63/0x300 [ 836.179672] kernel_init_freeable+0x2cb/0x31b [ 836.180403] kernel_init+0x17/0x140 [ 836.181035] ret_from_fork+0x1f/0x30 [ 836.181687] -> #1 (pernet_ops_rwsem){+.+.}-{3:3}: [ 836.182628] down_write+0x25/0x60 [ 836.183235] unregister_netdevice_notifier+0x1c/0xb0 [ 836.184029] mlx5_ib_roce_cleanup+0x94/0x120 [mlx5_ib] [ 836.184855] __mlx5_ib_remove+0x35/0x60 [mlx5_ib] [ 836.185637] mlx5_eswitch_unregister_vport_reps+0x22f/0x440 [mlx5_core] [ 836.186698] auxiliary_bus_remove+0x18/0x30 [ 836.187409] device_release_driver_internal+0x1f6/0x270 [ 836.188253] bus_remove_device+0xef/0x160 [ 836.188939] device_del+0x18b/0x3f0 [ 836.189562] mlx5_rescan_drivers_locked+0xd6/0x2d0 [mlx5_core] [ 836.190516] mlx5_lag_remove_devices+0x69/0xe0 [mlx5_core] [ 836.191414] mlx5_do_bond_work+0x441/0x620 [mlx5_core] [ 836.192278] process_one_work+0x25c/0x590 [ 836.192963] worker_thread+0x4f/0x3d0 [ 836.193609] kthread+0xcb/0xf0 [ 836.194189] ret_from_fork+0x1f/0x30 [ 836.194826] -> #0 (&ldev->lock){+.+.}-{3:3}: [ 836.195734] __lock_acquire+0x15b8/0x2a10 [ 836.196426] lock_acquire+0xce/0x2d0 [ 836.197057] __mutex_lock+0x6b/0xf80 [ 836.197708] mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core] [ 836.198575] tc_act_parse_mirred+0x25b/0x800 [mlx5_core] [ 836.199467] parse_tc_actions+0x168/0x5a0 [mlx5_core] [ 836.200340] __mlx5e_add_fdb_flow+0x263/0x480 [mlx5_core] [ 836.201241] mlx5e_configure_flower+0x8a0/0x1820 [mlx5_core] [ 836.202187] tc_setup_cb_add+0xd7/0x200 [ 836.202856] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 836.203739] fl_change+0xbbe/0x1730 [cls_flower] [ 836.204501] tc_new_tfilter+0x407/0xd90 [ 836.205168] rtnetlink_rcv_msg+0x406/0x5a0 [ 836.205877] netlink_rcv_skb+0x4e/0xf0 [ 836.206535] netlink_unicast+0x190/0x250 [ 836.207217] netlink_sendmsg+0x243/0x4b0 [ 836.207915] sock_sendmsg+0x33/0x40 [ 836.208538] ____sys_sendmsg+0x1d1/0x1f0 [ 836.209219] ___sys_sendmsg+0xab/0xf0 [ 836.209878] __sys_sendmsg+0x51/0x90 [ 836.210510] do_syscall_64+0x3d/0x90 [ 836.211137] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 836.211954] other info that might help us debug this: [ 836.213174] Chain exists of: [ 836.213174] &ldev->lock --> rtnl_mutex --> &block->cb_lock 836.214650] Possible unsafe locking scenario: [ 836.214650] [ 836.215574] CPU0 CPU1 [ 836.216255] ---- ---- [ 836.216943] lock(&block->cb_lock); [ 836.217518] lock(rtnl_mutex); [ 836.218348] lock(&block->cb_lock); [ 836.219212] lock(&ldev->lock); [ 836.219758] [ 836.219758] *** DEADLOCK *** [ 836.219758] [ 836.220747] 2 locks held by handler1/12198: [ 836.221390] #0: ffff8881d4de2930 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200 [ 836.222646] #1: ffff88810c9a92c0 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core] [ 836.224063] stack backtrace: [ 836.224799] CPU: 6 PID: 12198 Comm: handler1 Not tainted 5.19.0-rc5_net_56b7df2 #1 [ 836.225923] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 836.227476] Call Trace: [ 836.227929] <TASK> [ 836.228332] dump_stack_lvl+0x57/0x7d [ 836.228924] check_noncircular+0x104/0x120 [ 836.229562] __lock_acquire+0x15b8/0x2a10 [ 836.230201] lock_acquire+0xce/0x2d0 [ 836.230776] ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core] [ 836.231614] ? find_held_lock+0x2b/0x80 [ 836.232221] __mutex_lock+0x6b/0xf80 [ 836.232799] ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core] [ 836.233636] ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core] [ 836.234451] ? xa_load+0xc3/0x190 [ 836.234995] mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core] [ 836.235803] tc_act_parse_mirred+0x25b/0x800 [mlx5_core] [ 836.236636] ? tc_act_can_offload_mirred+0x135/0x210 [mlx5_core] [ 836.237550] parse_tc_actions+0x168/0x5a0 [mlx5_core] [ 836.238364] __mlx5e_add_fdb_flow+0x263/0x480 [mlx5_core] [ 836.239202] mlx5e_configure_flower+0x8a0/0x1820 [mlx5_core] [ 836.240076] ? lock_acquire+0xce/0x2d0 [ 836.240668] ? tc_setup_cb_add+0x5b/0x200 [ 836.241294] tc_setup_cb_add+0xd7/0x200 [ 836.241917] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 836.242709] fl_change+0xbbe/0x1730 [cls_flower] [ 836.243408] tc_new_tfilter+0x407/0xd90 [ 836.244043] ? tc_del_tfilter+0x880/0x880 [ 836.244672] rtnetlink_rcv_msg+0x406/0x5a0 [ 836.245310] ? netlink_deliver_tap+0x7a/0x4b0 [ 836.245991] ? if_nlmsg_stats_size+0x2b0/0x2b0 [ 836.246675] netlink_rcv_skb+0x4e/0xf0 [ 836.258046] netlink_unicast+0x190/0x250 [ 836.258669] netlink_sendmsg+0x243/0x4b0 [ 836.259288] sock_sendmsg+0x33/0x40 [ 836.259857] ____sys_sendmsg+0x1d1/0x1f0 [ 836.260473] ___sys_sendmsg+0xab/0xf0 [ 836.261064] ? lock_acquire+0xce/0x2d0 [ 836.261669] ? find_held_lock+0x2b/0x80 [ 836.262272] ? __fget_files+0xb9/0x190 [ 836.262871] ? __fget_files+0xd3/0x190 [ 836.263462] __sys_sendmsg+0x51/0x90 [ 836.264064] do_syscall_64+0x3d/0x90 [ 836.264652] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 836.265425] RIP: 0033:0x7fdbe5e2677d [ 836.266012] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ba ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 ee ee ff ff 48 [ 836.268485] RSP: 002b:00007fdbe48a75a0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 836.269598] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fdbe5e2677d [ 836.270576] RDX: 0000000000000000 RSI: 00007fdbe48a7640 RDI: 000000000000003c [ 836.271565] RBP: 00007fdbe48a8368 R08: 0000000000000000 R09: 0000000000000000 [ 836.272546] R10: 00007fdbe48a84b0 R11: 0000000000000293 R12: 0000557bd17dc860 [ 836.273527] R13: 0000000000000000 R14: 0000557bd17dc860 R15: 00007fdbe48a7640 [ 836.274521] </TASK> To avoid using mode holding ldev->lock in the configure flow, we queue a work to the lag workqueue and cease wait on a completion object. In addition, we remove the lock from mlx5_lag_do_mirred() since it is not really protecting anything. It should be noted that an actual deadlock has not been observed. Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-21net/mlx5: Fix handling of entry refcount when command is not issued to FWMoshe Shemesh
In case command interface is down, or the command is not allowed, driver did not increment the entry refcount, but might have decrement as part of forced completion handling. Fix that by always increment and decrement the refcount to make it symmetric for all flows. Fixes: 50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler") Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reported-by: Jack Wang <jinpu.wang@ionos.com> Tested-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-21net/mlx5: cmdif, Print info on any firmware cmd failure to tracepointMoshe Shemesh
While moving to new CMD API (quiet API), some pre-existing flows may call the new API function that in case of error, returns the error instead of printing it as previously done. For such flows we bring back the print but to tracepoint this time for sys admins to have the ability to check for errors especially for commands using the new quiet API. Tracepoint output example: devlink-1333 [001] ..... 822.746922: mlx5_cmd: ACCESS_REG(0x805) op_mod(0x0) failed, status bad resource(0x5), syndrome (0xb06e1f), err(-22) Fixes: f23519e542e5 ("net/mlx5: cmdif, Add new api for command execution") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-21net/mlx5: SF: Fix probing active SFs during driver probe phaseShay Drory
When SF devices and SF port representors are located on different functions, unloading and reloading of SF parent driver doesn't recreate the existing SF present in the device. Fix it by querying SFs and probe active SFs during driver probe phase. Fixes: 90d010b8634b ("net/mlx5: SF, Add auxiliary device support") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-21net/mlx5: Fix FW tracer timestamp calculationMoshe Shemesh
Fix a bug in calculation of FW tracer timestamp. Decreasing one in the calculation should effect only bits 52_7 and not effect bits 6_0 of the timestamp, otherwise bits 6_0 are always set in this calculation. Fixes: 70dd6fdb8987 ("net/mlx5: FW tracer, parse traces and kernel tracing support") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Feras Daoud <ferasda@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-21net/mlx5: Do not query pci info while pci disabledRoy Novich
The driver should not interact with PCI while PCI is disabled. Trying to do so may result in being unable to get vital signs during PCI reset, driver gets timed out and fails to recover. Fixes: fad1783a6d66 ("net/mlx5: Print more info on pci error handlers") Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-11-21octeontx2-af: cn10k: mcs: Fix copy and paste bug in mcs_bbe_intr_handler()Dan Carpenter
This code accidentally uses the RX macro twice instead of the RX and TX. Fixes: 6c635f78c474 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts") Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21ipv4/fib: Replace zero-length array with DECLARE_FLEX_ARRAY() helperKees Cook
Zero-length arrays are deprecated[1] and are being replaced with flexible array members in support of the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy(), correctly instrument array indexing with UBSAN_BOUNDS, and to globally enable -fstrict-flex-arrays=3. Replace zero-length array with flexible-array member in struct key_vector. This results in no differences in binary output. [1] https://github.com/KSPP/linux/issues/78 Cc: Jakub Kicinski <kuba@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21selftests/net: Find nettest in current directoryDaniel Díaz
The `nettest` binary, built from `selftests/net/nettest.c`, was expected to be found in the path during test execution of `fcnal-test.sh` and `pmtu.sh`, leading to tests getting skipped when the binary is not installed in the system, as can be seen in these logs found in the wild [1]: # TEST: vti4: PMTU exceptions [SKIP] [ 350.600250] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready [ 350.607421] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready # 'nettest' command not found; skipping tests # xfrm6udp not supported # TEST: vti6: PMTU exceptions (ESP-in-UDP) [SKIP] [ 351.605102] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready [ 351.612243] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready # 'nettest' command not found; skipping tests # xfrm4udp not supported The `unicast_extensions.sh` tests also rely on `nettest`, but it runs fine there because it looks for the binary in the current working directory [2]: The same mechanism that works for the Unicast extensions tests is here copied over to the PMTU and functional tests. [1] https://lkft.validation.linaro.org/scheduler/job/5839508#L6221 [2] https://lkft.validation.linaro.org/scheduler/job/5839508#L7958 Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== The following patchset contains late Netfilter fixes for net: 1) Use READ_ONCE()/WRITE_ONCE() to update ct->mark, from Daniel Xu. Not reported by syzbot, but I presume KASAN would trigger post a splat on this. This is a rather old issue, predating git history. 2) Do not set up extensions for set element with end interval flag set on. This leads to bogusly skipping this elements as expired when listing the set/map to userspace as well as increasing memory consumpton when stateful expressions are used. This issue has been present since 4.18, when timeout support for rbtree set was added. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21net: microchip: sparx5: Fix return value in sparx5_tc_setup_qdisc_ets()Lu Wei
Function sparx5_tc_setup_qdisc_ets() always returns negative value because it return -EOPNOTSUPP in the end. This patch returns the rersult of sparx5_tc_ets_add() and sparx5_tc_ets_del() directly. Fixes: 211225428d65 ("net: microchip: sparx5: add support for offloading ets qdisc") Signed-off-by: Lu Wei <luwei32@huawei.com> Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21Merge branch 'nfc-leaks'David S. Miller
Shang XiaoJing says: ==================== nfc: Fix potential memory leak of skb There are still somewhere maybe leak the skb, fix the memleaks by adding fail path. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21nfc: s3fwrn5: Fix potential memory leak in s3fwrn5_nci_send()Shang XiaoJing
s3fwrn5_nci_send() won't free the skb when it failed for the check before s3fwrn5_write(). As the result, the skb will memleak. Free the skb when the check failed. Fixes: c04c674fadeb ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Suggested-by: Pavel Machek <pavel@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21nfc: nxp-nci: Fix potential memory leak in nxp_nci_send()Shang XiaoJing
nxp_nci_send() won't free the skb when it failed for the check before write(). As the result, the skb will memleak. Free the skb when the check failed. Fixes: dece45855a8b ("NFC: nxp-nci: Add support for NXP NCI chips") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Suggested-by: Pavel Machek <pavel@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21nfc: nfcmrvl: Fix potential memory leak in nfcmrvl_i2c_nci_send()Shang XiaoJing
nfcmrvl_i2c_nci_send() will be called by nfcmrvl_nci_send(), and skb should be freed in nfcmrvl_i2c_nci_send(). However, nfcmrvl_nci_send() won't free the skb when it failed for the test_bit(). Free the skb when test_bit() failed. Fixes: b5b3e23e4cac ("NFC: nfcmrvl: add i2c driver") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Suggested-by: Pavel Machek <pavel@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18macsec: Fix invalid error code setYueHaibing
'ret' is defined twice in macsec_changelink(), when it is set in macsec_is_offloaded case, it will be invalid before return. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20221118011249.48112-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18bonding: fix ICMPv6 header handling when receiving IPv6 messagesHangbin Liu
Currently, we get icmp6hdr via function icmp6_hdr(), which needs the skb transport header to be set first. But there is no rule to ask driver set transport header before netif_receive_skb() and bond_handle_frame(). So we will not able to get correct icmp6hdr on some drivers. Fix this by using skb_header_pointer to get the IPv6 and ICMPV6 headers. Reported-by: Liang Li <liali@redhat.com> Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20221118034353.1736727-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18Merge branch 'nfp-fixes-for-v6-1'Jakub Kicinski
Simon Horman says: ==================== nfp: fixes for v6.1 - Ensure that information displayed by "devlink port show" reflects the number of lanes available to be split. - Avoid NULL dereference in ethtool test code. ==================== Link: https://lore.kernel.org/r/20221117153744.688595-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18nfp: add port from netdev validation for EEPROM accessJaco Coetzee
Setting of the port flag `NFP_PORT_CHANGED`, introduced to ensure the correct reading of EEPROM data, causes a fatal kernel NULL pointer dereference in cases where the target netdev type cannot be determined. Add validation of port struct pointer before attempting to set the `NFP_PORT_CHANGED` flag. Return that operation is not supported if the netdev type cannot be determined. Fixes: 4ae97cae07e1 ("nfp: ethtool: fix the display error of `ethtool -m DEVNAME`") Signed-off-by: Jaco Coetzee <jaco.coetzee@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18nfp: fill splittable of devlink_port_attrs correctlyDiana Wang
The error is reflected in that it shows wrong splittable status of port when executing "devlink port show". The reason which leads the error is that the assigned operation of splittable is just a simple negation operation of split and it does not consider port lanes quantity. A splittable port should have several lanes that can be split(lanes quantity > 1). If without the judgement, it will show wrong message for some firmware, such as 2x25G, 2x10G. Fixes: a0f49b548652 ("devlink: Add a new devlink port split ability attribute and pass to netlink") Signed-off-by: Diana Wang <na.wang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net: pch_gbe: fix pci device refcount leak while module exitingYang Yingliang
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). In pch_gbe_probe(), pci_get_domain_bus_and_slot() is called, so in error path in probe() and remove() function, pci_dev_put() should be called to avoid refcount leak. Compile tested only. Fixes: 1a0bdadb4e36 ("net/pch_gbe: supports eg20t ptp clock") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221117135148.301014-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18octeontx2-af: debugsfs: fix pci device refcount leakYang Yingliang
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So before returning from rvu_dbg_rvu_pf_cgx_map_display() or cgx_print_dmac_flt(), pci_dev_put() is called to avoid refcount leak. Fixes: dbc52debf95f ("octeontx2-af: Debugfs support for DMAC filters") Fixes: e2fb37303865 ("octeontx2-af: Display CGX, NIX and PF map in debugfs.") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221117124658.162409-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net/qla3xxx: fix potential memleak in ql3xxx_send()Zhang Changzhong
The ql3xxx_send() returns NETDEV_TX_OK without freeing skb in error handling case, add dev_kfree_skb_any() to fix it. Fixes: bd36b0ac5d06 ("qla3xxx: Add support for Qlogic 4032 chip.") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1668675039-21138-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net: mvpp2: fix possible invalid pointer dereferenceHui Tang
It will cause invalid pointer dereference to priv->cm3_base behind, if PTR_ERR(priv->cm3_base) in mvpp2_get_sram(). Fixes: e54ad1e01c00 ("net: mvpp2: add CM3 SRAM memory map") Signed-off-by: Hui Tang <tanghui20@huawei.com> Link: https://lore.kernel.org/r/20221117084032.101144-1-tanghui20@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net/mlx4: Check retval of mlx4_bitmap_initPeter Kosyh
If mlx4_bitmap_init fails, mlx4_bitmap_alloc_range will dereference the NULL pointer (bitmap->table). Make sure, that mlx4_bitmap_alloc_range called in no error case. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: d57febe1a478 ("net/mlx4: Add A0 hybrid steering") Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Peter Kosyh <pkosyh@yandex.ru> Link: https://lore.kernel.org/r/20221117152806.278072-1-pkosyh@yandex.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18net: ethernet: mtk_eth_soc: fix error handling in mtk_open()Liu Jian
If mtk_start_dma() fails, invoke phylink_disconnect_phy() to perform cleanup. phylink_disconnect_phy() contains the put_device action. If phylink_disconnect_phy is not performed, the Kref of netdev will leak. Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support") Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20221117111356.161547-1-liujian56@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-18netfilter: nf_tables: do not set up extensions for end intervalPablo Neira Ayuso
Elements with an end interval flag set on do not store extensions. The global set definition is currently setting on the timeout and stateful expression for end interval elements. This leads to skipping end interval elements from the set->ops->walk() path as the expired check bogusly reports true. Moreover, do not set up stateful expressions for elements with end interval flag set on since this is never used. Fixes: 65038428b2c6 ("netfilter: nf_tables: allow to specify stateful expression in set definition") Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-11-18netfilter: conntrack: Fix data-races around ct markDaniel Xu
nf_conn:mark can be read from and written to in parallel. Use READ_ONCE()/WRITE_ONCE() for reads and writes to prevent unwanted compiler optimizations. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-11-18net: pch_gbe: fix potential memleak in pch_gbe_tx_queue()Wang Hai
In pch_gbe_xmit_frame(), NETDEV_TX_OK will be returned whether pch_gbe_tx_queue() sends data successfully or not, so pch_gbe_tx_queue() needs to free skb before returning. But pch_gbe_tx_queue() returns without freeing skb in case of dma_map_single() fails. Add dev_kfree_skb_any() to fix it. Fixes: 77555ee72282 ("net: Add Gigabit Ethernet driver of Topcliff PCH") Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18nfc/nci: fix race with opening and closingLin Ma
Previously we leverage NCI_UNREG and the lock inside nci_close_device to prevent the race condition between opening a device and closing a device. However, it still has problem because a failed opening command will erase the NCI_UNREG flag and allow another opening command to bypass the status checking. This fix corrects that by making sure the NCI_UNREG is held. Reported-by: syzbot+43475bf3cfbd6e41f5b7@syzkaller.appspotmail.com Fixes: 48b71a9e66c2 ("NFC: add NCI_UNREG flag to eliminate the race") Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18net: dsa: sja1105: disallow C45 transactions on the BASE-TX MDIO busVladimir Oltean
You'd think people know that the internal 100BASE-TX PHY on the SJA1110 responds only to clause 22 MDIO transactions, but they don't :) When a clause 45 transaction is attempted, sja1105_base_tx_mdio_read() and sja1105_base_tx_mdio_write() don't expect "reg" to contain bit 30 set (MII_ADDR_C45) and pack this value into the SPI transaction buffer. But the field in the SPI buffer has a width smaller than 30 bits, so we see this confusing message from the packing() API rather than a proper rejection of C45 transactions: Call trace: dump_stack+0x1c/0x38 sja1105_pack+0xbc/0xc0 [sja1105] sja1105_xfer+0x114/0x2b0 [sja1105] sja1105_xfer_u32+0x44/0xf4 [sja1105] sja1105_base_tx_mdio_read+0x44/0x7c [sja1105] mdiobus_read+0x44/0x80 get_phy_c45_ids+0x70/0x234 get_phy_device+0x68/0x15c fwnode_mdiobus_register_phy+0x74/0x240 of_mdiobus_register+0x13c/0x380 sja1105_mdiobus_register+0x368/0x490 [sja1105] sja1105_setup+0x94/0x119c [sja1105] Cannot store 401d2405 inside bits 24-4 (would truncate) Fixes: 5a8f09748ee7 ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18rxrpc: Fix race between conn bundle lookup and bundle removal [ZDI-CAN-15975]David Howells
After rxrpc_unbundle_conn() has removed a connection from a bundle, it checks to see if there are any conns with available channels and, if not, removes and attempts to destroy the bundle. Whilst it does check after grabbing client_bundles_lock that there are no connections attached, this races with rxrpc_look_up_bundle() retrieving the bundle, but not attaching a connection for the connection to be attached later. There is therefore a window in which the bundle can get destroyed before we manage to attach a new connection to it. Fix this by adding an "active" counter to struct rxrpc_bundle: (1) rxrpc_connect_call() obtains an active count by prepping/looking up a bundle and ditches it before returning. (2) If, during rxrpc_connect_call(), a connection is added to the bundle, this obtains an active count, which is held until the connection is discarded. (3) rxrpc_deactivate_bundle() is created to drop an active count on a bundle and destroy it when the active count reaches 0. The active count is checked inside client_bundles_lock() to prevent a race with rxrpc_look_up_bundle(). (4) rxrpc_unbundle_conn() then calls rxrpc_deactivate_bundle(). Fixes: 245500d853e9 ("rxrpc: Rewrite the client connection manager") Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-15975 Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: zdi-disclosures@trendmicro.com cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18selftests/net: fix missing xdp_dummyWang Yufen
After commit afef88e65554 ("selftests/bpf: Store BPF object files with .bpf.o extension"), we should use xdp_dummy.bpf.o instade of xdp_dummy.o. In addition, use the BPF_FILE variable to save the BPF object file name, which can be better identified and modified. Fixes: afef88e65554 ("selftests/bpf: Store BPF object files with .bpf.o extension") Signed-off-by: Wang Yufen <wangyufen@huawei.com> Cc: Daniel Müller <deso@posteo.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18ipvlan: hold lower dev to avoid possible use-after-freeMahesh Bandewar
Recently syzkaller discovered the issue of disappearing lower device (NETDEV_UNREGISTER) while the virtual device (like macvlan) is still having it as a lower device. So it's just a matter of time similar discovery will be made for IPvlan device setup. So fixing it preemptively. Also while at it, add a refcount tracker. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18net: neigh: decrement the family specific qlenThomas Zeitlhofer
Commit 0ff4eb3d5ebb ("neighbour: make proxy_queue.qlen limit per-device") introduced the length counter qlen in struct neigh_parms. There are separate neigh_parms instances for IPv4/ARP and IPv6/ND, and while the family specific qlen is incremented in pneigh_enqueue(), the mentioned commit decrements always the IPv4/ARP specific qlen, regardless of the currently processed family, in pneigh_queue_purge() and neigh_proxy_process(). As a result, with IPv6/ND, the family specific qlen is only incremented (and never decremented) until it exceeds PROXY_QLEN, and then, according to the check in pneigh_enqueue(), neighbor solicitations are not answered anymore. As an example, this is noted when using the subnet-router anycast address to access a Linux router. After a certain amount of time (in the observed case, qlen exceeded PROXY_QLEN after two days), the Linux router stops answering neighbor solicitations for its subnet-router anycast address and effectively becomes unreachable. Another result with IPv6/ND is that the IPv4/ARP specific qlen is decremented more often than incremented. This leads to negative qlen values, as a signed integer has been used for the length counter qlen, and potentially to an integer overflow. Fix this by introducing the helper function neigh_parms_qlen_dec(), which decrements the family specific qlen. Thereby, make use of the existing helper function neigh_get_dev_parms_rcu(), whose definition therefore needs to be placed earlier in neighbour.c. Take the family member from struct neigh_table to determine the currently processed family and appropriately call neigh_parms_qlen_dec() from pneigh_queue_purge() and neigh_proxy_process(). Additionally, use an unsigned integer for the length counter qlen. Fixes: 0ff4eb3d5ebb ("neighbour: make proxy_queue.qlen limit per-device") Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18net: liquidio: simplify if expressionLeon Romanovsky
Fix the warning reported by kbuild: cocci warnings: (new ones prefixed by >>) >> drivers/net/ethernet/cavium/liquidio/lio_main.c:1797:54-56: WARNING !A || A && B is equivalent to !A || B drivers/net/ethernet/cavium/liquidio/lio_main.c:1827:54-56: WARNING !A || A && B is equivalent to !A || B Fixes: 8979f428a4af ("net: liquidio: release resources when liquidio driver open failed") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-17Merge branch 'mptcp-selftests-fix-timeouts-and-test-isolation'Jakub Kicinski
Mat Martineau says: ==================== mptcp: selftests: Fix timeouts and test isolation Patches 1 and 3 adjust test timeouts to reduce false negatives on slow machines. Patch 2 improves test isolation by running the mptcp_sockopt test in its own net namespace. ==================== Link: https://lore.kernel.org/r/20221115221046.20370-1-mathew.j.martineau@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17selftests: mptcp: fix mibit vs mbit mix upMatthieu Baerts
The estimated time was supposing the rate was expressed in mibit (bit * 1024^2) but it is in mbit (bit * 1000^2). This makes the threshold higher but in a more realistic way to avoid false positives reported by CI instances. Before this patch, the thresholds were at 7561/4005ms and now they are at 7906/4178ms. While at it, also fix a typo in the linked comment, spotted by Mat. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/310 Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests") Suggested-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17selftests: mptcp: run mptcp_sockopt from a new netnsMatthieu Baerts
Not running it from a new netns causes issues if some MPTCP settings are modified, e.g. if MPTCP is disabled from the sysctl knob, if multiple addresses are available and added to the MPTCP path-manager, etc. In these cases, the created connection will not behave as expected, e.g. unable to create an MPTCP socket, more than one subflow is seen, etc. A new "sandbox" net namespace is now created and used to run mptcp_sockopt from this controlled environment. Fixes: ce9979129a0b ("selftests: mptcp: add mptcp getsockopt test cases") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17selftests: mptcp: gives slow test-case more timePaolo Abeni
On slow or busy VM, some test-cases still fail because the data transfer completes before the endpoint manipulation actually took effect. Address the issue by artificially increasing the runtime for the relevant test-cases. Fixes: ef360019db40 ("selftests: mptcp: signal addresses testcases") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/309 Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17Merge tag 'net-6.1-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf. Current release - regressions: - tls: fix memory leak in tls_enc_skb() and tls_sw_fallback_init() Previous releases - regressions: - bridge: fix memory leaks when changing VLAN protocol - dsa: make dsa_master_ioctl() see through port_hwtstamp_get() shims - dsa: don't leak tagger-owned storage on switch driver unbind - eth: mlxsw: avoid warnings when not offloaded FDB entry with IPv6 is removed - eth: stmmac: ensure tx function is not running in stmmac_xdp_release() - eth: hns3: fix return value check bug of rx copybreak Previous releases - always broken: - kcm: close race conditions on sk_receive_queue - bpf: fix alignment problem in bpf_prog_test_run_skb() - bpf: fix writing offset in case of fault in strncpy_from_kernel_nofault - eth: macvlan: use built-in RCU list checking - eth: marvell: add sleep time after enabling the loopback bit - eth: octeon_ep: fix potential memory leak in octep_device_setup() Misc: - tcp: configurable source port perturb table size - bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace)" * tag 'net-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits) net: use struct_group to copy ip/ipv6 header addresses net: usb: smsc95xx: fix external PHY reset net: usb: qmi_wwan: add Telit 0x103a composition netdevsim: Fix memory leak of nsim_dev->fa_cookie tcp: configurable source port perturb table size l2tp: Serialize access to sk_user_data with sk_callback_lock net: thunderbolt: Fix error handling in tbnet_init() net: microchip: sparx5: Fix potential null-ptr-deref in sparx_stats_init() and sparx5_start() net: lan966x: Fix potential null-ptr-deref in lan966x_stats_init() net: dsa: don't leak tagger-owned storage on switch driver unbind net/x25: Fix skb leak in x25_lapb_receive_frame() net: ag71xx: call phylink_disconnect_phy if ag71xx_hw_enable() fail in ag71xx_open() bridge: switchdev: Fix memory leaks when changing VLAN protocol net: hns3: fix setting incorrect phy link ksettings for firmware in resetting process net: hns3: fix return value check bug of rx copybreak net: hns3: fix incorrect hw rss hash type of rx packet net: phy: marvell: add sleep time after enabling the loopback bit net: ena: Fix error handling in ena_init() kcm: close race conditions on sk_receive_queue net: ionic: Fix error handling in ionic_init_module() ...
2022-11-17net: use struct_group to copy ip/ipv6 header addressesHangbin Liu
kernel test robot reported warnings when build bonding module with make W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/net/bonding/: from ../drivers/net/bonding/bond_main.c:35: In function ‘fortify_memcpy_chk’, inlined from ‘iph_to_flow_copy_v4addrs’ at ../include/net/ip.h:566:2, inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3984:3: ../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 413 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function ‘fortify_memcpy_chk’, inlined from ‘iph_to_flow_copy_v6addrs’ at ../include/net/ipv6.h:900:2, inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3994:3: ../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 413 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This is because we try to copy the whole ip/ip6 address to the flow_key, while we only point the to ip/ip6 saddr. Note that since these are UAPI headers, __struct_group() is used to avoid the compiler warnings. Reported-by: kernel test robot <lkp@intel.com> Fixes: c3f8324188fa ("net: Add full IPv6 addresses to flow_keys") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20221115142400.1204786-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-17net: usb: smsc95xx: fix external PHY resetAlexandru Tachici
An external PHY needs settling time after power up or reset. In the bind() function an mdio bus is registered. If at this point the external PHY is still initialising, no valid PHY ID will be read and on phy_find_first() the bind() function will fail. If an external PHY is present, wait the maximum time specified in 802.3 45.2.7.1.1. Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221115114434.9991-2-alexandru.tachici@analog.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-17net: usb: qmi_wwan: add Telit 0x103a compositionEnrico Sau
Add the following Telit LE910C4-WWX composition: 0x103a: rmnet Signed-off-by: Enrico Sau <enrico.sau@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20221115105859.14324-1-enrico.sau@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-16netdevsim: Fix memory leak of nsim_dev->fa_cookieWang Yufen
kmemleak reports this issue: unreferenced object 0xffff8881bac872d0 (size 8): comm "sh", pid 58603, jiffies 4481524462 (age 68.065s) hex dump (first 8 bytes): 04 00 00 00 de ad be ef ........ backtrace: [<00000000c80b8577>] __kmalloc+0x49/0x150 [<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim] [<0000000093d78e77>] full_proxy_write+0xf3/0x180 [<000000005a662c16>] vfs_write+0x1c5/0xaf0 [<000000007aabf84a>] ksys_write+0xed/0x1c0 [<000000005f1d2e47>] do_syscall_64+0x3b/0x90 [<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue occurs in the following scenarios: nsim_dev_trap_fa_cookie_write() kmalloc() fa_cookie nsim_dev->fa_cookie = fa_cookie .. nsim_drv_remove() The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove(). Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata") Signed-off-by: Wang Yufen <wangyufen@huawei.com> Cc: Jiri Pirko <jiri@mellanox.com> Link: https://lore.kernel.org/r/1668504625-14698-1-git-send-email-wangyufen@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 08:40:52 +0000