| Age | Commit message (Collapse) | Author |
|---|
|
We don't currently validate that we exit streaming mode and clear ZA when
we enter a signal handler. Add simple checks for this in the SSVE and ZA
tests.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241106-arm64-fpmr-signal-test-v1-1-31fa34ce58fe@kernel.org
[catalin.marinas@arm.com: Use %lx in fprintf() as uint64_t seems to be unsigned long in glibc]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Fix the incorrect length modifiers in arm64/abi/syscall-abi.c.
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241108134920.1233992-4-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
While prctl() returns an 'int', the PR_MTE_TCF_MASK is defined as
unsigned long which results in the larger type following a bitwise 'and'
operation. Cast the printf() argument to 'int'.
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241108134920.1233992-3-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Lots of incorrect length modifiers, missing arguments or conversion
specifiers. Fix them.
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241108134920.1233992-2-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
While some assemblers (including the LLVM assembler I mostly use) will
happily accept SMSTART as an instruction by default others, specifically
gas, require that any architecture extensions be explicitly enabled.
The assembler SME test programs use manually encoded helpers for the new
instructions but no SMSTART helper is defined, only SM and ZA specific
variants. Unfortunately the irritators that were just added use plain
SMSTART so on stricter assemblers these fail to build:
za-test.S:160: Error: selected processor does not support `smstart'
Switch to using SMSTART ZA via the manually encoded smstart_za macro we
already have defined.
Fixes: d65f27d240bb ("kselftest/arm64: Implement irritators for ZA and ZT")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241108-arm64-selftest-asm-error-v1-1-7ce27b42a677@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently in fp-stress we test signal delivery to the test threads by
sending SIGUSR2 which simply counts how many signals are delivered. The
test programs now also all have a SIGUSR1 handler which for the threads
doing userspace testing additionally modifies the floating point register
state in the signal handler, verifying that when we return the saved
register state is restored from the signal context as expected. Switch over
to triggering that to validate that we are restoring as expected.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-6-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The other stress test programs provide a SIGUSR1 handler which modifies the
live register state in order to validate that signal context is being
restored during signal return. While we can't usefully do this when testing
kernel mode FP usage provide a handler for SIGUSR1 which just counts the
number of signals like we do for SIGUSR2, allowing fp-stress to treat all
the test programs uniformly.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-5-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently we don't use the irritator signal in our floating point stress
tests so when we added ZA and ZT stress tests we didn't actually bother
implementing any actual action in the handlers, we just counted the signal
deliveries. In preparation for using the irritators let's implement them,
just trivially SMSTOP and SMSTART to reset all bits in the register to 0.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-4-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The irritator handlers for the fp-stress test programs all use ADR to load
an address into x0 which is then not referenced. Remove these ADRs as they
just cause confusion.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-2-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The comments in the handlers for the irritator signal in the test threads
for fp-stress suggest that the irritator will corrupt the register state
observed by the main thread but this is not the case, instead the FPSIMD
and SVE irritators (which are the only ones that are implemented) modify
the current register state which is expected to be overwritten on return
from the handler by the saved register state. Update the comment to reflect
what the handler is actually doing.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-1-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
While fp-stress is waiting for children to start it doesn't send any
signals to them so there is no need for it to have as short an epoll()
timeout as it does when the children are all running. We do still want to
have some timeout so that we can log diagnostics about missing children but
this can be relatively large. On emulated platforms the overhead of running
the supervisor process is quite high, especially during the process of
execing the test binaries.
Implement a longer epoll() timeout during the setup phase, using a 5s
timeout while waiting for children and switching to the signal raise
interval when all the children are started and we start sending signals.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241030-arm64-fp-stress-interval-v2-2-bd3cef48c22c@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently we only deliver signals to the processes being tested about once
a second, meaning that the signal code paths are subject to relatively
little stress. Increase this frequency substantially to 25ms intervals,
along with some minor refactoring to make this more readily tuneable and
maintain the 1s logging interval. This interval was chosen based on some
experimentation with emulated platforms to avoid causing so much extra load
that the test starts to run into the 45s limit for selftests or generally
completely disconnect the timeout numbers from the
We could increase this if we moved the signal generation out of the main
supervisor thread, though we should also consider that he percentage of
time that we spend interacting with the floating point state is also a
consideration.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241030-arm64-fp-stress-interval-v2-1-bd3cef48c22c@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The test for SVE_B16B16 had a cut'n'paste of a SME instruction, fix it with
a relevant SVE instruction.
Fixes: 44d10c27bd75 ("kselftest/arm64: Add 2023 DPISA hwcap test coverage")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241028-arm64-b16b16-test-v1-1-59a4a7449bdf@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The logging in the allocation helpers variously uses ksft_print_msg() with
very intermittent logging of errno and perror() (which won't produce KTAP
conformant output) when logging the result of API calls that set errno.
Standardise on using the ksft_perror() helper in these cases so that more
information is available should the tests fail.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20241029-arm64-mte-test-logging-v1-1-a128e732e36e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently if we encounter an error between fork() and exec() of a child
process we log the error to stderr. This means that the errors don't get
annotated with the child information which makes diagnostics harder and
means that if we miss the exit signal from the child we can deadlock
waiting for output from the child. Improve robustness and output quality
by logging to stdout instead.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241023-arm64-fp-stress-exec-fail-v1-1-ee3c62932c15@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently fp-stress does not report a top level test result if it runs to
completion, it always exits with a return code 0. Use the ksft_finished()
helper to ensure that the exit code for the top level program reports a
failure if any of the individual tests has failed.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241017-arm64-fp-stress-exit-code-v1-1-f528e53a2321@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When checking MTE tags, we print some diagnostic messages when the tests
fail. Some variables uses there are "longs", however we only use "%x"
for the format specifier.
Update the format specifiers to "%lx", to match the variable types they
are supposed to print.
Fixes: f3b2a26ca78d ("kselftest/arm64: Verify mte tag inclusion via prctl")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240816153251.2833702-9-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When printing the value of a pointer, we should not use an integer
format specifier, but the dedicated "%p" instead.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240816153251.2833702-8-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When printing the signal context's PC, we use a "%lx" format specifier,
which matches the common userland (glibc's) definition of uint64_t as an
"unsigned long". However the structure in question is defined in a
kernel uapi header, which uses a self defined __u64 type, and the arm64
kernel headers define this using "int-ll64.h", so it becomes an
"unsigned long long". This mismatch leads to the usual compiler warning.
The common fix would be to use "PRIx64", but because this is defined by
the userland's toolchain libc headers, it wouldn't match as well. Since
we know the exact type of __u64, just use "%llx" here instead, to silence
this warning.
This also fixes a more severe typo: "$lx" is not a valid format
specifier.
Fixes: 191e678bdc9b ("kselftest/arm64: Log unexpected asynchronous MTE faults")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240816153251.2833702-7-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Using pointers for the format specifier strings in printf-style
functions can create potential security problems, as the number of
arguments to be parsed could vary from call to call. Most compilers
consequently warn about those:
"format not a string literal and no format arguments [-Wformat-security]"
If we only want to print a constant string, we can just use a fixed "%s"
format instead, and pass the string as an argument.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240816153251.2833702-5-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
If MTE is not available on a system, we detect this early and skip all
the MTE selftests. However this happens before we print the TAP plan, so
tools parsing the TAP output get confused and report an error.
Use the existing ksft_exit_skip() function to handle this, which uses a
dummy plan to work with tools expecting proper TAP syntax, as described
in the TAP specification.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240816153251.2833702-4-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The F8DP2 DPISA extension has a separate cpuinfo field, named
accordingly.
Change the erroneously placed name of "f8dp4" to "f8dp2".
Fixes: 44d10c27bd75 ("kselftest/arm64: Add 2023 DPISA hwcap test coverage")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240816153251.2833702-3-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The definition of GNU_SOURCE was recently centralised in an upper layer
kselftest Makefile, so the definition in the arm64 signal tests Makefile
is no longer needed. To make things worse, since both definitions are
not strictly identical, the compiler warns about it:
<command-line>: warning: "_GNU_SOURCE" redefined
<command-line>: note: this is the location of the previous definition
Drop the definition in the arm64/signal Makefile.
Fixes: cc937dad85ae ("selftests: centralize -D_GNU_SOURCE= to CFLAGS in lib.mk")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240816153251.2833702-2-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
|
|
The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:
#if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
...
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
always be sent when needed
- check for PCLK in the SynQuacer controller as an optional clock,
allowing ACPI to directly provide the clock rate
- KEBA driver Kconfig dependency fix
- fix XIIC driver power suspend sequence
* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c: keba: I2C_KEBA should depend on KEBA_CP500
i2c: synquacer: Deal with optional PCLK correctly
i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- handle chained SGLs in the new tracing code (Christoph Hellwig)
* tag 'dma-mapping-6.12-2024-09-29' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix DMA API tracing for chained scatterlists
|
|
Pull more SCSI updates from James Bottomley:
"These are mostly minor updates.
There are two drivers (lpfc and mpi3mr) which missed the initial
pull and a core change to retry a start/stop unit which affect
suspend/resume"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: lpfc: Update lpfc version to 14.4.0.5
scsi: lpfc: Support loopback tests with VMID enabled
scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
scsi: mpi3mr: Update driver version to 8.12.0.0.50
scsi: mpi3mr: Improve wait logic while controller transitions to READY state
scsi: mpi3mr: Update MPI Headers to revision 34
scsi: mpi3mr: Use firmware-provided timestamp update interval
scsi: mpi3mr: Enhance the Enable Controller retry logic
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
scsi: pm8001: Do not overwrite PCI queue mapping
scsi: scsi_debug: Remove a useless memset()
scsi: pmcraid: Convert comma to semicolon
scsi: sd: Retry START STOP UNIT commands
scsi: mpi3mr: A performance fix
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
...
|
|
Pull more bcachefs updates from Kent Overstreet:
"Assorted minor syzbot fixes, and for bigger stuff:
Fix two disk accounting rewrite bugs:
- Disk accounting keys use the version field of bkey so that journal
replay can tell which updates have been applied to the btree.
This is set in the transaction commit path, after we've gotten our
journal reservation (and our time ordering), but the
BCH_TRANS_COMMIT_skip_accounting_apply flag that journal replay
uses was incorrectly skipping this for new updates generated prior
to journal replay.
This fixes the underlying cause of an assertion pop in
disk_accounting_read.
- A couple of fixes for disk accounting + device removal.
Checking if acocunting replicas entries were marked in the
superblock was being done at the wrong point, when deltas in the
journal could still zero them out, and then additionally we'd try
to add a missing replicas entry to the superblock without checking
if it referred to an invalid (removed) device.
A whole slew of repair fixes:
- fix infinite loop in propagate_key_to_snapshot_leaves(), this fixes
an infinite loop when repairing a filesystem with many snapshots
- fix incorrect transaction restart handling leading to occasional
"fsck counted ..." warnings
- fix warning in __bch2_fsck_err() for bkey fsck errors
- check_inode() in fsck now correctly checks if the filesystem was
clean
- there shouldn't be pending logged ops if the fs was clean, we now
check for this
- remove_backpointer() doesn't remove a dirent that doesn't actually
point to the inode
- many more fsck errors are AUTOFIX"
* tag 'bcachefs-2024-09-28' of git://evilpiepirate.org/bcachefs: (35 commits)
bcachefs: check_subvol_path() now prints subvol root inode
bcachefs: remove_backpointer() now checks if dirent points to inode
bcachefs: dirent_points_to_inode() now warns on mismatch
bcachefs: Fix lost wake up
bcachefs: Check for logged ops when clean
bcachefs: BCH_FS_clean_recovery
bcachefs: Convert disk accounting BUG_ON() to WARN_ON()
bcachefs: Fix BCH_TRANS_COMMIT_skip_accounting_apply
bcachefs: Check for accounting keys with bversion=0
bcachefs: rename version -> bversion
bcachefs: Don't delete unlinked inodes before logged op resume
bcachefs: Fix BCH_SB_ERRS() so we can reorder
bcachefs: Fix fsck warnings from bkey validation
bcachefs: Move transaction commit path validation to as late as possible
bcachefs: Fix disk accounting attempting to mark invalid replicas entry
bcachefs: Fix unlocked access to c->disk_sb.sb in bch2_replicas_entry_validate()
bcachefs: Fix accounting read + device removal
bcachefs: bch_accounting_mode
bcachefs: fix transaction restart handling in check_extents(), check_dirents()
bcachefs: kill inode_walker_entry.seen_this_pos
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fix TDX MMIO #VE fault handling, and add two new Intel model numbers
for 'Pantherlake' and 'Diamond Rapids'"
* tag 'x86-urgent-2024-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add two Intel CPU model numbers
x86/tdx: Fix "in-kernel MMIO" check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"lockdep:
- Fix potential deadlock between lockdep and RCU (Zhiguo Niu)
- Use str_plural() to address Coccinelle warning (Thorsten Blum)
- Add debuggability enhancement (Luis Claudio R. Goncalves)
static keys & calls:
- Fix static_key_slow_dec() yet again (Peter Zijlstra)
- Handle module init failure correctly in static_call_del_module()
(Thomas Gleixner)
- Replace pointless WARN_ON() in static_call_module_notify() (Thomas
Gleixner)
<linux/cleanup.h>:
- Add usage and style documentation (Dan Williams)
rwsems:
- Move is_rwsem_reader_owned() and rwsem_owner() under
CONFIG_DEBUG_RWSEMS (Waiman Long)
atomic ops, x86:
- Redeclare x86_32 arch_atomic64_{add,sub}() as void (Uros Bizjak)
- Introduce the read64_nonatomic macro to x86_32 with cx8 (Uros
Bizjak)"
Signed-off-by: Ingo Molnar <mingo@kernel.org>
* tag 'locking-urgent-2024-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Move is_rwsem_reader_owned() and rwsem_owner() under CONFIG_DEBUG_RWSEMS
jump_label: Fix static_key_slow_dec() yet again
static_call: Replace pointless WARN_ON() in static_call_module_notify()
static_call: Handle module init failure correctly in static_call_del_module()
locking/lockdep: Simplify character output in seq_line()
lockdep: fix deadlock issue between lockdep and rcu
lockdep: Use str_plural() to fix Coccinelle warning
cleanup: Add usage and style documentation
lockdep: suggest the fix for "lockdep bfs error:-1" on print_bfs_bug
locking/atomic/x86: Redeclare x86_32 arch_atomic64_{add,sub}() as void
locking/atomic/x86: Introduce the read64_nonatomic macro to x86_32 with cx8
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
"Extend string_choices.cocci to use more available helpers
Ten patches from Hongbo Li extending string_choices.cocci with the
complete set of functions offered by include/linux/string_choices.h.
One patch from myself reducing the number of redundant cases that are
checked by Coccinelle, giving a small performance improvement"
* tag 'cocci-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
Reduce Coccinelle choices in string_choices.cocci
coccinelle: Remove unnecessary parentheses for only one possible change.
coccinelle: Add rules to find str_yes_no() replacements
coccinelle: Add rules to find str_on_off() replacements
coccinelle: Add rules to find str_write_read() replacements
coccinelle: Add rules to find str_read_write() replacements
coccinelle: Add rules to find str_enable{d}_disable{d}() replacements
coccinelle: Add rules to find str_lo{w}_hi{gh}() replacements
coccinelle: Add rules to find str_hi{gh}_lo{w}() replacements
coccinelle: Add rules to find str_false_true() replacements
coccinelle: Add rules to find str_true_false() replacements
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"One urgent fix to vDSO as automated testing is failing due to this
bug"
* tag 'linux_kselftest-next-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vDSO: align stack for O2-optimized memcpy
|
|
Merge all pending locking commits into a single branch.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The isomorphism neg_if_exp negates the test of a ?: conditional,
making it unnecessary to have an explicit case for a negated test
with the branches inverted.
At the same time, we can disable neg_if_exp in cases where a
different API function may be more suitable for a negated test.
Finally, in the non-patch cases, E matches an expression with
parentheses around it, so there is no need to mention ()
explicitly in the pattern. The () are still needed in the patch
cases, because we want to drop them, if they are present.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
The parentheses are only needed if there is a disjunction, ie a
set of possible changes. If there is only one pattern, we can
remove these parentheses. Just like the format:
- x
+ y
not:
(
- x
+ y
)
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_yes_no()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_on_off()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_write_read()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_read_write()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_enable{d}_
disable{d}() to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_lo{w}_hi{gh}()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_hi{gh}_lo{w}()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As done with str_true_false(), add checks for str_false_true()
opportunities. A simple test can find over 9 cases currently
exist in the tree.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
After str_true_false() has been introduced in the tree,
we can add rules for finding places where str_true_false()
can be used. A simple test can find over 10 locations.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
Pull x86 kvm updates from Paolo Bonzini:
"x86:
- KVM currently invalidates the entirety of the page tables, not just
those for the memslot being touched, when a memslot is moved or
deleted.
This does not traditionally have particularly noticeable overhead,
but Intel's TDX will require the guest to re-accept private pages
if they are dropped from the secure EPT, which is a non starter.
Actually, the only reason why this is not already being done is a
bug which was never fully investigated and caused VM instability
with assigned GeForce GPUs, so allow userspace to opt into the new
behavior.
- Advertise AVX10.1 to userspace (effectively prep work for the
"real" AVX10 functionality that is on the horizon)
- Rework common MSR handling code to suppress errors on userspace
accesses to unsupported-but-advertised MSRs
This will allow removing (almost?) all of KVM's exemptions for
userspace access to MSRs that shouldn't exist based on the vCPU
model (the actual cleanup is non-trivial future work)
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC)
splits the 64-bit value into the legacy ICR and ICR2 storage,
whereas Intel (APICv) stores the entire 64-bit value at the ICR
offset
- Fix a bug where KVM would fail to exit to userspace if one was
triggered by a fastpath exit handler
- Add fastpath handling of HLT VM-Exit to expedite re-entering the
guest when there's already a pending wake event at the time of the
exit
- Fix a WARN caused by RSM entering a nested guest from SMM with
invalid guest state, by forcing the vCPU out of guest mode prior to
signalling SHUTDOWN (the SHUTDOWN hits the VM altogether, not the
nested guest)
- Overhaul the "unprotect and retry" logic to more precisely identify
cases where retrying is actually helpful, and to harden all retry
paths against putting the guest into an infinite retry loop
- Add support for yielding, e.g. to honor NEED_RESCHED, when zapping
rmaps in the shadow MMU
- Refactor pieces of the shadow MMU related to aging SPTEs in
prepartion for adding multi generation LRU support in KVM
- Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is
enabled, i.e. when the CPU has already flushed the RSB
- Trace the per-CPU host save area as a VMCB pointer to improve
readability and cleanup the retrieval of the SEV-ES host save area
- Remove unnecessary accounting of temporary nested VMCB related
allocations
- Set FINAL/PAGE in the page fault error code for EPT violations if
and only if the GVA is valid. If the GVA is NOT valid, there is no
guest-side page table walk and so stuffing paging related metadata
is nonsensical
- Fix a bug where KVM would incorrectly synthesize a nested VM-Exit
instead of emulating posted interrupt delivery to L2
- Add a lockdep assertion to detect unsafe accesses of vmcs12
structures
- Harden eVMCS loading against an impossible NULL pointer deref
(really truly should be impossible)
- Minor SGX fix and a cleanup
- Misc cleanups
Generic:
- Register KVM's cpuhp and syscore callbacks when enabling
virtualization in hardware, as the sole purpose of said callbacks
is to disable and re-enable virtualization as needed
- Enable virtualization when KVM is loaded, not right before the
first VM is created
Together with the previous change, this simplifies a lot the logic
of the callbacks, because their very existence implies
virtualization is enabled
- Fix a bug that results in KVM prematurely exiting to userspace for
coalesced MMIO/PIO in many cases, clean up the related code, and
add a testcase
- Fix a bug in kvm_clear_guest() where it would trigger a buffer
overflow _if_ the gpa+len crosses a page boundary, which thankfully
is guaranteed to not happen in the current code base. Add WARNs in
more helpers that read/write guest memory to detect similar bugs
Selftests:
- Fix a goof that caused some Hyper-V tests to be skipped when run on
bare metal, i.e. NOT in a VM
- Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES
guest
- Explicitly include one-off assets in .gitignore. Past Sean was
completely wrong about not being able to detect missing .gitignore
entries
- Verify userspace single-stepping works when KVM happens to handle a
VM-Exit in its fastpath
- Misc cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
Documentation: KVM: fix warning in "make htmldocs"
s390: Enable KVM_S390_UCONTROL config in debug_defconfig
selftests: kvm: s390: Add VM run test case
KVM: SVM: let alternatives handle the cases when RSB filling is required
KVM: VMX: Set PFERR_GUEST_{FINAL,PAGE}_MASK if and only if the GVA is valid
KVM: x86/mmu: Use KVM_PAGES_PER_HPAGE() instead of an open coded equivalent
KVM: x86/mmu: Add KVM_RMAP_MANY to replace open coded '1' and '1ul' literals
KVM: x86/mmu: Fold mmu_spte_age() into kvm_rmap_age_gfn_range()
KVM: x86/mmu: Morph kvm_handle_gfn_range() into an aging specific helper
KVM: x86/mmu: Honor NEED_RESCHED when zapping rmaps and blocking is allowed
KVM: x86/mmu: Add a helper to walk and zap rmaps for a memslot
KVM: x86/mmu: Plumb a @can_yield parameter into __walk_slot_rmaps()
KVM: x86/mmu: Move walk_slot_rmaps() up near for_each_slot_rmap_range()
KVM: x86/mmu: WARN on MMIO cache hit when emulating write-protected gfn
KVM: x86/mmu: Detect if unprotect will do anything based on invalid_list
KVM: x86/mmu: Subsume kvm_mmu_unprotect_page() into the and_retry() version
KVM: x86: Rename reexecute_instruction()=>kvm_unprotect_and_retry_on_failure()
KVM: x86: Update retry protection fields when forcing retry on emulation failure
KVM: x86: Apply retry protection to "unprotect on failure" path
KVM: x86: Check EMULTYPE_WRITE_PF_TO_SP before unprotecting gfn
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Clean up and improve vdso code: use SYM_* macros for function and
data annotations, add CFI annotations to fix GDB unwinding, optimize
the chacha20 implementation
- Add vfio-ap driver feature advertisement for use by libvirt and
mdevctl
* tag 's390-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: Driver feature advertisement
s390/vdso: Use one large alternative instead of an alternative branch
s390/vdso: Use SYM_DATA_START_LOCAL()/SYM_DATA_END() for data objects
tools: Add additional SYM_*() stubs to linkage.h
s390/vdso: Use macros for annotation of asm functions
s390/vdso: Add CFI annotations to __arch_chacha20_blocks_nostack()
s390/vdso: Fix comment within __arch_chacha20_blocks_nostack()
s390/vdso: Get rid of permutation constants
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"There are a few fixes / cleanups from Vincent, Chunhui, and Petr, but
the most important part of this pull request is the Rust community
stepping up to help maintain both C / Rust code for future Rust module
support. We grow the set of modules maintainers by three now, and with
this hope to scale to help address what's needed to properly support
future Rust module support.
A lot of exciting stuff coming in future kernel releases.
This has been on linux-next for ~ 3 weeks now with no issues"
* tag 'modules-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Refine kmemleak scanned areas
module: abort module loading when sysfs setup suffer errors
MAINTAINERS: scale modules with more reviewers
module: Clean up the description of MODULE_SIG_<type>
module: Split modules_install compression and in-kernel decompression
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- crash fix in fbcon_putcs
- avoid a possible string memory overflow in sisfb
- minor code optimizations in omapfb and fbcon
* tag 'fbdev-for-6.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: sisfb: Fix strbuf array overflow
fbcon: break earlier in search_fb_in_map and search_for_mapped_con
fbdev: omapfb: Call of_node_put(ep) only once in omapdss_of_find_source_for_first_ep()
fbcon: Fix a NULL pointer dereference issue in fbcon_putcs
|
