summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-02-10wifi: rtw88: Fix a typo of debug message in rtw8723d_iqk_check_tx_failed()Andrew Kreimer
There is a typo in debug messages: - afer -> after Fix it via codespell. Signed-off-by: Andrew Kreimer <algonell@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250203180913.5435-1-algonell@gmail.com
2025-02-10wifi: rtw89: regd: avoid using BITMAP_FROM_U64() to assign function bitmapPing-Ke Shih
Since there are two function features for now, func_bitmap[] has single one element, which BITMAP_FROM_U64() generating two elements is exceeded. Change to assign function bitmap barely. With i386-allmodconfig (a 32 bit system), it throws >> include/linux/bitmap.h:736:33: warning: excess elements in array initializer 736 | ((unsigned long) ((u64)(n) >> 32)) | ^ drivers/net/wireless/realtek/rtw89/regd.c:16:34: note: in expansion of macro 'BITMAP_FROM_U64' 16 | .func_bitmap = { BITMAP_FROM_U64(_fmap), }, \ | ^~~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtw89/regd.c:20:9: note: in expansion of macro 'COUNTRY_REGD' 20 | COUNTRY_REGD("00", RTW89_WW, RTW89_WW, RTW89_WW, 0x0); | ^~~~~~~~~~~~ Fixes: 79a36fc56bea ("wifi: rtw89: regd: handle supported regulatory functions by country") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202502031932.BMQ4lhJT-lkp@intel.com/ Cc: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250205014051.13765-1-pkshih@realtek.com
2025-02-10wifi: rtw89: coex: Update Wi-Fi/Bluetooth coexistence version to 7.0.3Ching-Te Ku
Refine the TWS Bluetooth related coexistence mechanism. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250205013233.10945-4-pkshih@realtek.com
2025-02-10wifi: rtw89: coex: To avoid TWS serials A2DP lag, adjust slot arrangementChing-Te Ku
The TWS(True wireless stereo) serials Bluetooth audio device need to keep packet traffic not only with DUT, it also need to synchronize packet with its assistant earbud. And all the BR/EDR Bluetooth device need to do page scan to keep re-connect event sensitively between different DUT. These behavior will make TWS Bluetooth device cost more time slot to keep the good audio performance. This patch decrease half of Wi-Fi slot(from 40ms to 20ms) in a single cycle. Make the slot more flexible to prevent audio lag. The single cycle will be shorter, then it will bring some slot protection cost make Wi-Fi throughput decrease about 5%. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250205013233.10945-3-pkshih@realtek.com
2025-02-10wifi: rtw89: coex: Assign value over than 0 to avoid firmware timer hangChing-Te Ku
If the slot duration is 0, the firmware timer will trigger timer hang at the timer initializing state in a low rate due to hardware algorithm. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250205013233.10945-2-pkshih@realtek.com
2025-02-10wifi: rtw89: fw: validate multi-firmware header before getting its sizePing-Ke Shih
To access firmware elements appended after multi-firmware, add its size as offset to get start address of firmware elements. +-----+-------+------+---------+--------------+ -- | sig | fw_nr | rsvd | version | reserved | \ +---------------------------------------------+ | fw 0 | cv | type | mp | rsvd | shift | size | rsvd | | +---------------------------------------------+ | fw 1 | cv | type | mp | rsvd | shift | size | rsvd | | +---------------------------------------------+ | fw N-1 | ... | | +=============================================+ | mfw size | fw 0 content | | +=============================================+ | | fw 1 content | | +=============================================+ | | ... | | +=============================================+ | | fw N -1 content | | +=============================================+ --/ | fw element TLV X | +=============================================+ | fw element TLV Y | +=============================================+ | fw element TLV Z | +=============================================+ To avoid Coverity warning when getting mfw size, validate it header ahead. Addresses-Coverity-ID: 1544385 ("Untrusted array index read") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250203072911.47313-5-pkshih@realtek.com
2025-02-10wifi: rtw89: fw: validate multi-firmware header before accessingPing-Ke Shih
A firmeware file contains multi-firmware with a header to represent contents. The mfw_hdr->fw_nr is to define number of firmware in file. +-----+-------+------+---------+--------------+ | sig | fw_nr | rsvd | version | reserved | +---------------------------------------------+ -- fw 0 | cv | type | mp | rsvd | shift | size | rsvd | \ +---------------------------------------------+ | fw 1 | cv | type | mp | rsvd | shift | size | rsvd | | mfw_hdr->fw_nr +---------------------------------------------+ | fw N-1 | ... | / +=============================================+ -- | fw 0 content | | (pointed by fw0 shift/size) | +=============================================+ To avoid Coverity warning, validate header is in range of firmware size, and also validate the range of actual firmware content is in range. Addresses-Coverity-ID: 1494046 ("Untrusted loop bound") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250203072911.47313-4-pkshih@realtek.com
2025-02-10wifi: rtw89: ps: update H2C command with more info for PSEric Huang
Adding beacon BW offset, OP1dB table and rfe_type to lps_ml_cmn_info. These information will help FW to configure RX more accurately. Signed-off-by: Eric Huang <echuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250203072911.47313-3-pkshih@realtek.com
2025-02-10wifi: rtw89: call power_on ahead before selecting firmwarePing-Ke Shih
Driver selects firmware by hardware version, which normally can be read from registers before selecting firmware. However, certain chips such as RTL8851B, it needs to read hardware version from efuse while doing power_on, but do power_on after selecting firmware in current flow. To resolve this flow problem, move power_on out from rtw89_mac_partial_init(), and call rtw89_mac_pwr_on() separately at proper places to have expected flow. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250203072911.47313-2-pkshih@realtek.com
2025-02-03wifi: rtl8xxxu: retry firmware download on errorSoeren Moch
Occasionally there is an EPROTO error during firmware download. This error is converted to EAGAIN in the download function. But nobody tries again and so device probe fails. Implement download retry to fix this. This error was observed (and fix tested) on a tbs2910 board [1] with an embedded RTL8188EU (0bda:8179) device behind a USB hub. [1] arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts Signed-off-by: Soeren Moch <smoch@web.de> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250127194828.599379-1-smoch@web.de
2025-02-03wifi: rtw88: Don't use static local variable in ↵Bitterblue Smith
rtw8821c_set_tx_power_index_by_rate Some users want to plug two identical USB devices at the same time. This static variable could theoretically cause them to use incorrect TX power values. Move the variable to the caller and pass a pointer to it to rtw8821c_set_tx_power_index_by_rate(). Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/fe42858c-9b9f-4f03-9aaa-737472c2cd90@gmail.com
2025-02-03wifi: rtw88: Don't use static local variable in ↵Bitterblue Smith
rtw8822b_set_tx_power_index_by_rate Some users want to plug two identical USB devices at the same time. This static variable could theoretically cause them to use incorrect TX power values. Move the variable to the caller and pass a pointer to it to rtw8822b_set_tx_power_index_by_rate(). Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/8a60f581-0ab5-4d98-a97d-dd83b605008f@gmail.com
2025-02-03wifi: rtl8xxxu: Enable AP mode for RTL8192CU (RTL8188CUS)Ezra Buehler
This allows the driver to be used in wireless access point mode on the AT91SAM9G25-based GARDENA smart Gateway. Unfortunately, the data throughput in AP mode appears to be lower than with the vendor driver (or in STA mode). Especially when sending, the data rate is significantly lower. My measurements performed with iperf3 and an Edimax EW-7811Un (VID: 7392, PID: 7811) showed a maximum TX rate of about 4 Mbits/sec compared to the ~24 Mbits/sec measured with the rtl8192cu driver. Although the performance might be good enough for our use case, this is something that should be further looked into. Signed-off-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250122071512.10165-1-ezra@easyb.ch
2025-02-03wifi: rtw89: pci: not assert wiphy_lock to free early_h2c for PCI probe/removePing-Ke Shih
Except probe/remove flow, the consumers of early_h2c list are interface start and debugfs. There must be no race between probe/remove flow and interface start. The failed probe flow is to free early_h2c list as well as remove flow, at these two moments debugfs doesn't present. Thus, it is safe to free early_h2c list without held wiphy_lock in these situations. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250122060310.31976-11-pkshih@realtek.com
2025-02-03wifi: rtw89: remove definition of driver mutexPing-Ke Shih
No consumers of driver mutex now, so remove definition eventually. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250122060310.31976-10-pkshih@realtek.com
2025-02-03wifi: rtw89: manual cosmetic along lockdep_assert_wiphy()Ping-Ke Shih
With spatch script, already remove most driver mutex and generate lockdep_assert_wiphy(), and some are needed to refine manually further to be expected: - lockdep_assert_wiphy() always be the first statement in function - return directly rather than unnecessary goto - change assert from mutex to wiphy lock, which script can't convert automatically. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250122060310.31976-9-pkshih@realtek.com
2025-02-03wifi: rtw89: remove consumers of driver mutexPing-Ke Shih
All need lock have taken both driver mutex and wiphy lock, so we can remove driver mutex safely by below spatch script. Also, check every lockdep_assert_wiphy() is executed without locks warning at runtime. @ rule1_1 @ @@ - lockdep_assert_held(&rtwdev->mutex); + lockdep_assert_wiphy(rtwdev->hw->wiphy); @ rule1_2 @ @@ - guard(mutex)(&rtwdev->mutex); + lockdep_assert_wiphy(rtwdev->hw->wiphy); @ rule2_1 @ @@ - mutex_lock(&rtwdev->mutex); + lockdep_assert_wiphy(rtwdev->hw->wiphy); ... - mutex_unlock(&rtwdev->mutex); @ rule2_2 @ @@ - mutex_unlock(&rtwdev->mutex); + lockdep_assert_wiphy(rtwdev->hw->wiphy); ... - mutex_lock(&rtwdev->mutex); @ rule3_1 @ type t; identifier fn; @@ t fn(struct wiphy *wiphy, ...) { ... - lockdep_assert_wiphy(rtwdev->hw->wiphy); + lockdep_assert_wiphy(wiphy); ... } @ rule3_1_1 @ type t; identifier fn; @@ t fn(...) { ... struct wiphy *wiphy = ...; ... - lockdep_assert_wiphy(rtwdev->hw->wiphy); + lockdep_assert_wiphy(wiphy); ... } @ rule3_2 @ type t; identifier fn; @@ t fn(struct ieee80211_hw *hw, ...) { ... - lockdep_assert_wiphy(rtwdev->hw->wiphy); + lockdep_assert_wiphy(hw->wiphy); ... } @ rule3_2_1 @ type t; identifier fn; @@ t fn(...) { ... struct ieee80211_hw *hw = ...; ... - lockdep_assert_wiphy(rtwdev->hw->wiphy); + lockdep_assert_wiphy(hw->wiphy); ... } The compiler warnings will be fixed manually by latter patch: rtw89/mac80211.c:371:1: warning: statement expected after label Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250122060310.31976-8-pkshih@realtek.com
2025-02-03wifi: rtw89: debugfs: use debugfs_short_fopsPing-Ke Shih
With this change, the object code size can reduce 768 bytes. text data bss dec hex filename 77257 4262 4 81523 13e73 debug.o (before) 76489 4262 4 80755 13b73 debug.o (after) Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250122060310.31976-7-pkshih@realtek.com
2025-02-03wifi: rtw89: debugfs: use wiphy_locked_debugfs_{read,write}() if neededPing-Ke Shih
If a debugfs entry takes driver mutex now, let it uses wiphy_locked_debugfs_{read,write}() to take both driver mutex and wiphy lock. Add rwlock option to support this. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250122060310.31976-6-pkshih@realtek.com
2025-02-03wifi: rtw89: debugfs: specify buffer size allocated by devm_kazlloc() for ↵Ping-Ke Shih
reading Some debufs entries need output buffer over default size 4K. Since reading of many debugfs entries is to access IO, it costs time to dynamically re-allocate larger buffer and access IO again and again. Add an option to specify the size it needs. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250122060310.31976-5-pkshih@realtek.com
2025-02-03wifi: rtw89: debugfs: implement file_ops::read/write to replace seq_filePing-Ke Shih
Since debugfs needs wiphy lock held, wiphy_locked_debugfs_{read,write}() will be adopted, so implmenet file_ops::read/write along with their arguments. For reading part, it needs lots of changes because seq_file is not suitable for wiphy_locked_debugfs_{read,write}(), so use spatch script below to convert basically, and manually implement the functions. @ rule1 @ identifier m; @@ - seq_printf(m, + p += scnprintf(p, end - p, ...) @ rule2 @ identifier m; @@ - seq_puts(m, + p += scnprintf(p, end - p, ...) For current version, only 4K buffer to output. To note ourselves, add ellipsis symbol "..." to trailing if buffer is full. Later, add an option to specify buffer size needed by a debugfs entry. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250122060310.31976-4-pkshih@realtek.com
2025-02-03wifi: rtw89: use wiphy_work() to replace ieee802111_work()Ping-Ke Shih
For certain works protected by driver mutex, use wiphy_work() directly to have wiphy lock held naturally. Then every this kind of works is protected by both wiphy lock and driver mutex. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250122060310.31976-3-pkshih@realtek.com
2025-02-03wifi: rtw89: add wiphy_lock() to work that isn't held wiphy_lock() yetPing-Ke Shih
To ensure where are protected by driver mutex can also be protected by wiphy_lock(), so afterward we can remove driver mutex safely. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250122060310.31976-2-pkshih@realtek.com
2025-02-03wifi: rtw89: cleanup unused rtwdev::roc_workZong-Zhe Yang
The needed one was moved to rtwvif::roc_work. And, rtwdev::roc_work is unused. So, remove it. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250120034004.21135-1-pkshih@realtek.com
2025-02-03wifi: rtw89: regd: refactor init/setup flow and prototypeZong-Zhe Yang
The regulatory and wiphy setup should be done in rtw89_regd_setup(). And, what rtw89_regd_init() should do is to initialize target regulatory domain (regd), if and only if one is programmed in efuse. Since HW is registered after rtw89_regd_setup() and before rtw89_regd_init(), do not fill fields of regulatory in rtw89_regd_init(). So, move the regulatory->reg_6ghz_power assignment into rtw89_regd_setup(). Besides, rtw89_regd_notifier is assigned in rtw89_regd_setup() instead of rtw89_regd_init(). To reduce confusion, stop passing rtw89_regd_notifier to rtw89_regd_init(). And, rename rtw89_regd_init() to rtw89_regd_init_hint(). Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250120032723.19042-4-pkshih@realtek.com
2025-02-03wifi: rtw89: regd: handle supported regulatory functions by countryZong-Zhe Yang
There are two regulatory functions including TAS (Time Average SAR) and DAG (Dynamic Antenna Gain) for now. They are used to improve RF behavior. But, availability depends on country. Extend regd map to record the status of whether a country allows to enable certain regulatory functions. Also, extend the handling of loading regd map via FW element for this. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250120032723.19042-3-pkshih@realtek.com
2025-02-03wifi: rtw89: regd: support loading regd table from fw elementZong-Zhe Yang
Regd table is a table that we use to describe how to map Realtek RF TX power settings on different countries. Originally, a common regd table for all chips is implemented in driver. However, in order to work on all chips, the common regd table might have some trade-off. So now, there are also an individual regd table for some chips. And, we support loading it from FW element. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250120032723.19042-2-pkshih@realtek.com
2025-02-03wifi: rtw89: phy: disable CFO track when two PHY are working simultaneouslyPing-Ke Shih
To have good performance, adjust hardware XTAL to track CFO (carrier frequency offset). However, there is only one hardware XTAL, so it is not possible to track on two PHY simultaneously. It also can't track on single one PHY when two PHY are working, because the adjustment of XTAL will affect all PHY. Thus, disable CFO track for this case. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250117072828.16728-9-pkshih@realtek.com
2025-02-03wifi: rtw89: phy: support EDCCA log per PHYPing-Ke Shih
The registers of EDCCA log for PHY 1 isn't a simple offset, so define them accordingly. Then the function use register set to access reports according to phy_idx. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250117072828.16728-8-pkshih@realtek.com
2025-02-03wifi: rtw89: phy: support EDCCA per PHYPing-Ke Shih
Dynamic mechanism EDCCA (Energy Detection Clear Channel Assessment) is to dynamically adjusted to make EDCCA suitable for situations. Use PHY context to support two PHY. For the EDCCA log part, registers to report EDCCA for PHY 1 is not a simple offset from PHY 0, so add them by separate patch. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250117072828.16728-7-pkshih@realtek.com
2025-02-03wifi: rtw89: phy: support ch_info per PHYPing-Ke Shih
The ch_info is to record current channel info such as minimum RSSI of connected stations, and to assist in dynamic mechanisms of DIG and EDCCA. Move the struct to PHY context, so the dynamic mechanisms can use the info of the same PHY. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250117072828.16728-6-pkshih@realtek.com
2025-02-03wifi: rtw89: phy: support DIG per PHYPing-Ke Shih
DIG standing for dynamic initial gain is to define RX coverage. Adjust this value dynamically to gain good RX performance. Use PHY context to extend DIG algorithm to support two PHY. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250117072828.16728-5-pkshih@realtek.com
2025-02-03wifi: rtw89: phy: support env_monitor per PHYPing-Ke Shih
The env_monitor is to collect information of current operating channel as helper to make decision with better hardware parameters to adopt current environment. Use PHY context as argument to control PHY accordingly, and use rtw89_phy_{write32,read32}_idx with phy_idx to access registers. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250117072828.16728-4-pkshih@realtek.com
2025-02-03wifi: rtw89: phy: add PHY context array to support functions per PHYPing-Ke Shih
To support MLO working on PHY 0 and PHY 1, extend existing PHY dynamic mechanism from PHY 0 to PHY 0/1. Implement a 2 elements array for two PHY instances, and pass pointer of each element as argument to existing functions. Then existing algorithm is kept, unchanged. Also provide iterate and get function to access PHY context. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250117072828.16728-3-pkshih@realtek.com
2025-02-03wifi: rtw89: phy: rename to RTW89_PHY_NUM as proper namingPing-Ke Shih
The meaning is number of PHY, not maximum ID of PHY. Change to proper naming. No change logic at all. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250117072828.16728-2-pkshih@realtek.com
2025-01-20wifi: rtw89: Correct immediate cfg_len calculation for scan_offload_beLiang Jie
Ensures the correct calculation of `cfg_len` prior to the allocation of the skb in the `rtw89_fw_h2c_scan_offload_be` function, particularly when the `SCAN_OFFLOAD_BE_V0` firmware feature is enabled. It addresses an issue where an incorrect skb size might be allocated due to a delayed setting of `cfg_len`, potentially leading to memory inefficiencies. By moving the conditional check and assignment of `cfg_len` before skb allocation, the patch guarantees that `len`, which depends on `cfg_len`, is accurately computed, ensuring proper skb size and preventing any unnecessary memory reservation for firmware operations not supporting beyond the `w8` member of the command data structure. This correction helps to optimize memory usage and maintain consistent behavior across different firmware versions. Fixes: 6ca6b918f280 ("wifi: rtw89: 8922a: Add new fields for scan offload H2C command") Signed-off-by: Liang Jie <liangjie@lixiang.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250112105144.615474-1-buaajxlj@163.com
2025-01-20wifi: rtw89: coex: Update Wi-Fi/Bluetooth coexistence version to 7.0.2Ching-Te Ku
With this version, fix Wi-Fi scan/connecting/RF calibration triggered A2DP sound lag related issues. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250110015416.10704-4-pkshih@realtek.com
2025-01-20wifi: rtw89: coex: Separated Wi-Fi connecting event from Wi-Fi scan eventChing-Te Ku
Wi-Fi connecting process don't need to assign to firmware slot control, if assign firmware slot control for Wi-Fi connecting event, firmware will not toggle slots because driver don't tell the slot schedule to firmware. Wi-Fi connecting event end should also cancel the 4way handshake status. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250110015416.10704-3-pkshih@realtek.com
2025-01-20wifi: rtw89: coex: Add protect to avoid A2DP lag while Wi-Fi connectingChing-Te Ku
To get a well Wi-Fi RF quality, Wi-Fi need to do RF calibrations. While Wi-Fi is doing RF calibrations, driver will pause the Bluetooth traffic to make sure the RF calibration will not be interfered by Bluetooth. However, if the RF calibrations take too much time, Bluetooth audio will perform a lag sound. Add a function to make Bluetooth can do traffic between the individual calibrations to avoid Bluetooth sound lag. And patch related A2DP coexistence mechanism actions. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250110015416.10704-2-pkshih@realtek.com
2025-01-18Merge tag 'batadv-next-pullrequest-20250117' of ↵Jakub Kicinski
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - Reorder includes for distributed-arp-table.c, by Sven Eckelmann - Fix translation table change handling, by Remi Pommarel (2 patches) - Map VID 0 to untagged TT VLAN, by Sven Eckelmann - Update MAINTAINERS/mailmap e-mail addresses, by the respective authors (4 patches) - netlink: reduce duplicate code by returning interfaces, by Linus Lüssing * tag 'batadv-next-pullrequest-20250117' of git://git.open-mesh.org/linux-merge: batman-adv: netlink: reduce duplicate code by returning interfaces MAINTAINERS: mailmap: add entries for Antonio Quartulli mailmap: add entries for Sven Eckelmann mailmap: add entries for Simon Wunderlich MAINTAINERS: update email address of Marek Linder batman-adv: Map VID 0 to untagged TT VLAN batman-adv: Don't keep redundant TT change events batman-adv: Remove atomic usage for tt.local_changes batman-adv: Reorder includes for distributed-arp-table.c batman-adv: Start new development cycle ==================== Link: https://patch.msgid.link/20250117123910.219278-1-sw@simonwunderlich.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18Merge tag 'for-net-next-2025-01-15' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - btusb: Add new VID/PID 13d3/3610 for MT7922 - btusb: Add new VID/PID 13d3/3628 for MT7925 - btusb: Add MT7921e device 13d3:3576 - btusb: Add RTL8851BE device 13d3:3600 - btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x - btusb: add sysfs attribute to control USB alt setting - qca: Expand firmware-name property - qca: Fix poor RF performance for WCN6855 - L2CAP: handle NULL sock pointer in l2cap_sock_alloc - Allow reset via sysfs - ISO: Allow BIG re-sync - dt-bindings: Utilize PMU abstraction for WCN6750 - MGMT: Mark LL Privacy as stable * tag 'for-net-next-2025-01-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (23 commits) Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync Bluetooth: qca: Fix poor RF performance for WCN6855 Bluetooth: Allow reset via sysfs Bluetooth: Get rid of cmd_timeout and use the reset callback Bluetooth: Remove the cmd timeout count in btusb Bluetooth: Use str_enable_disable-like helpers Bluetooth: btmtk: Remove resetting mt7921 before downloading the fw Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_alloc Bluetooth: btusb: Add RTL8851BE device 13d3:3600 dt-bindings: bluetooth: Utilize PMU abstraction for WCN6750 Bluetooth: btusb: Add MT7921e device 13d3:3576 Bluetooth: btrtl: check for NULL in btrtl_setup_realtek() Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name() Bluetooth: qca: Expand firmware-name to load specific rampatch Bluetooth: qca: Update firmware-name to support board specific nvm dt-bindings: net: bluetooth: qca: Expand firmware-name property Bluetooth: btusb: Add new VID/PID 13d3/3628 for MT7925 Bluetooth: btusb: Add new VID/PID 13d3/3610 for MT7922 Bluetooth: btusb: add sysfs attribute to control USB alt setting Bluetooth: btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785x ... ==================== Link: https://patch.msgid.link/20250117213203.3921910-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18Merge tag 'wireless-next-2025-01-17' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.14 Most likely the last "new features" pull request for v6.14 and this is a bigger one. Multi-Link Operation (MLO) work continues both in stack in drivers. Few new devices supported and usual fixes all over. Major changes: cfg80211 * Emergency Preparedness Communication Services (EPCS) station mode support mac80211 * an option to filter a sta from being flushed * some support for RX Operating Mode Indication (OMI) power saving * support for adding and removing station links for MLO iwlwifi * new device ids * rework firmware error handling and restart rtw88 * RTL8812A: RFE type 2 support * LED support rtw89 * variant info to support RTL8922AE-VS mt76 * mt7996: single wiphy multiband support (preparation for MLO) * mt7996: support for more variants * mt792x: P2P_DEVICE support * mt7921u: TP-Link TXE50UH support ath12k * enable MLO for QCN9274 (although it seems to be broken with dual band devices) * MLO radar detection support * debugfs: transmit buffer OFDMA, AST entry and puncture stats * tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits) wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize() wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig wifi: wilc1000: unregister wiphy only after netdev registration wifi: cfg80211: adjust allocation of colocated AP data wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf() wifi: ath12k: fix key cache handling wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function wifi: ath12k: Remove ath12k_get_num_hw() helper function wifi: ath12k: Refactor the ath12k_hw get helper function argument wifi: ath12k: Refactor ath12k_hw set helper function argument wifi: mt76: mt7996: add implicit beamforming support for mt7992 wifi: mt76: mt7996: fix beacon command during disabling wifi: mt76: mt7996: fix ldpc setting wifi: mt76: mt7996: fix definition of tx descriptor wifi: mt76: connac: adjust phy capabilities based on band constraints wifi: mt76: mt7996: fix incorrect indexing of MIB FW event wifi: mt76: mt7996: fix HE Phy capability wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU wifi: mt76: mt7996: add max mpdu len capability wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain ... ==================== Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18net: introduce netdev_napi_exit()Eric Dumazet
After 1b23cdbd2bbc ("net: protect netdev->napi_list with netdev_lock()") it makes sense to iterate through dev->napi_list while holding the device lock. Also call synchronize_net() at most one time. Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250117232113.1612899-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18net: phy: remove leftovers from switch to linkmode bitmapsHeiner Kallweit
We have some leftovers from the switch to linkmode bitmaps which - have never been used - are not used any longer - have no user outside phy_device.c So remove them. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/5493b96e-88bb-4230-a911-322659ec5167@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18net: destroy dev->lock later in free_netdev()Eric Dumazet
syzbot complained that free_netdev() was calling netif_napi_del() after dev->lock mutex has been destroyed. This fires a warning for CONFIG_DEBUG_MUTEXES=y builds. Move mutex_destroy(&dev->lock) near the end of free_netdev(). [1] DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 0 PID: 5971 at kernel/locking/mutex.c:564 __mutex_lock_common kernel/locking/mutex.c:564 [inline] WARNING: CPU: 0 PID: 5971 at kernel/locking/mutex.c:564 __mutex_lock+0xdac/0xee0 kernel/locking/mutex.c:735 Modules linked in: CPU: 0 UID: 0 PID: 5971 Comm: syz-executor Not tainted 6.13.0-rc7-syzkaller-01131-g8d20dcda404d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024 RIP: 0010:__mutex_lock_common kernel/locking/mutex.c:564 [inline] RIP: 0010:__mutex_lock+0xdac/0xee0 kernel/locking/mutex.c:735 Code: 0f b6 04 38 84 c0 0f 85 1a 01 00 00 83 3d 6f 40 4c 04 00 75 19 90 48 c7 c7 60 84 0a 8c 48 c7 c6 00 85 0a 8c e8 f5 dc 91 f5 90 <0f> 0b 90 90 90 e9 c7 f3 ff ff 90 0f 0b 90 e9 29 f8 ff ff 90 0f 0b RSP: 0018:ffffc90003317580 EFLAGS: 00010246 RAX: ee0f97edaf7b7d00 RBX: ffff8880299f8cb0 RCX: ffff8880323c9e00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90003317710 R08: ffffffff81602ac2 R09: 1ffff110170c519a R10: dffffc0000000000 R11: ffffed10170c519b R12: 0000000000000000 R13: 0000000000000000 R14: 1ffff92000662ec4 R15: dffffc0000000000 FS: 000055557a046500(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd581d46ff8 CR3: 000000006f870000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> netdev_lock include/linux/netdevice.h:2691 [inline] __netif_napi_del include/linux/netdevice.h:2829 [inline] netif_napi_del include/linux/netdevice.h:2848 [inline] free_netdev+0x2d9/0x610 net/core/dev.c:11621 netdev_run_todo+0xf21/0x10d0 net/core/dev.c:11189 nsim_destroy+0x3c3/0x620 drivers/net/netdevsim/netdev.c:1028 __nsim_dev_port_del+0x14b/0x1b0 drivers/net/netdevsim/dev.c:1428 nsim_dev_port_del_all drivers/net/netdevsim/dev.c:1440 [inline] nsim_dev_reload_destroy+0x28a/0x490 drivers/net/netdevsim/dev.c:1661 nsim_drv_remove+0x58/0x160 drivers/net/netdevsim/dev.c:1676 device_remove drivers/base/dd.c:567 [inline] Fixes: 1b23cdbd2bbc ("net: protect netdev->napi_list with netdev_lock()") Reported-by: syzbot+85ff1051228a04613a32@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/678add43.050a0220.303755.0016.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250117224626.1427577-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18eth: bnxt: fix string truncation warning in FW versionJakub Kicinski
W=1 builds with gcc 14.2.1 report: drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:4193:32: error: ‘%s’ directive output may be truncated writing up to 31 bytes into a region of size 27 [-Werror=format-truncation=] 4193 | "/pkg %s", buf); It's upset that we let buf be full length but then we use 5 characters for "/pkg ". The builds is also clear with clang version 19.1.5 now. Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250117183726.1481524-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18mptcp: sysctl: add syn_retrans_before_tcp_fallbackMatthieu Baerts (NGI0)
The number of SYN + MPC retransmissions before falling back to TCP was fixed to 2. This is certainly a good default value, but having a fixed number can be a problem in some environments. The current behaviour means that if all packets are dropped, there will be: - The initial SYN + MPC - 2 retransmissions with MPC - The next ones will be without MPTCP. So typically ~3 seconds before falling back to TCP. In some networks where some temporally blackholes are unfortunately frequent, or when a client tries to initiate connections while the network is not ready yet, this can cause new connections not to have MPTCP connections. In such environments, it is now possible to increase the number of SYN retransmissions with MPTCP options to make sure MPTCP is used. Interesting values are: - 0: the first retransmission will be done without MPTCP options: quite aggressive, but also a higher risk of detecting false-positive MPTCP blackholes. - >= 128: all SYN retransmissions will keep the MPTCP options: back to the < 6.12 behaviour. The default behaviour is not changed here. Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250117-net-next-mptcp-syn_retrans_before_tcp_fallback-v1-1-ab4b187099b0@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18Merge branch 'net-xilinx-axienet-enable-adaptive-irq-coalescing-with-dim'Jakub Kicinski
Sean Anderson says: ==================== net: xilinx: axienet: Report an error for bad coalesce settings ==================== Link: https://patch.msgid.link/20250116232954.2696930-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18net: xilinx: axienet: Report an error for bad coalesce settingsSean Anderson
Instead of silently ignoring invalid/unsupported settings, report an error. Additionally, relax the check for non-zero usecs to apply only when it will be used (i.e. when frames != 1). Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed by: Shannon Nelson <shannon.nelson@amd.com> Link: https://patch.msgid.link/20250116232954.2696930-3-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18net: xilinx: axienet: Add some symbolic constants for IRQ delay timerSean Anderson
Instead of using literals, add some symbolic constants for the IRQ delay timer calculation. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed by: Shannon Nelson <shannon.nelson@amd.com> Link: https://patch.msgid.link/20250116232954.2696930-2-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 06:29:01 +0000