summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-28net/mlx5: Add release all pages capability bitEran Ben Elisha
Add a bit in HCA capabilities layout to indicate if release all pages is supported. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-28net/mlx5: Introduce TLS RX offload hardware bitsTariq Toukan
Add TLS RX offload related IFC hardware fields and enumerations. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-28net/mlx5: Add structure and defines for pci sync for fw update eventMoshe Shemesh
Add needed structure layouts and defines for pci sync for fw update event. The downstream patches will include event handlers for this event type. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-28net/mlx5: Add structure layout and defines for MFRL registerMoshe Shemesh
Add needed structure layouts and defines for MFRL (Management Firmware Reset Level) register. This structure will be used for the firmware upgrade and reset flow in the downstream patches. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-28net/mlx5: Refactor imm_inval_pkey field in cqe structRaed Salem
The imm_inval_pkey field can hold four different types of data, depends on the usage, the data could be one of the below: - Immediate field of the received message - Invalidate rkey - Pkey of the packet - Flow table metadata Current implementation doesn't reflect the intended usage of the field at usage time. Reflect the different types by replace this field with a union, modify code where this field is used to reflect its intended usage. Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-28net/mlx5: Use aligned variable while allocating ICM memoryErez Shitrit
The alignment value is part of the input structure, so use it and spare extra memory allocation when is not needed. Now, using the new ability when allocating icm for Direct-Rule insertion. Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-28net/mlx5: Introduce IPsec Connect-X offload hardware bits and structuresRaed Salem
Add IPsec offload related IFC structs, layouts and enumerations. Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-28net/mlx5: Add support for COPY steering actionHuy Nguyen
Add COPY type to modify_header action. IPsec feature is the first feature that needs COPY steering action. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Raed Salem <raeds@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update transobj.c new cmd interfaceLeon Romanovsky
Do mass update of transobj.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update SW steering new cmd interfaceLeon Romanovsky
Do mass update of SW steering to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update port.c new cmd interfaceLeon Romanovsky
Do mass update of port.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update rl.c new cmd interfaceLeon Romanovsky
Do mass update of rl.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update uar.c new cmd interfaceLeon Romanovsky
Do mass update of uar.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update pd.c new cmd interfaceLeon Romanovsky
Do mass update of pd.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update pagealloc.c new cmd interfaceLeon Romanovsky
Do mass update of pagealloc.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update mr.c new cmd interfaceLeon Romanovsky
Do mass update of mr.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update mcg.c new cmd interfaceLeon Romanovsky
Do mass update of mcg.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update main.c new cmd interfaceLeon Romanovsky
Do mass update of main.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update vxlan.c new cmd interfaceLeon Romanovsky
Do mass update of vxlan.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update mpfs.c new cmd interfaceLeon Romanovsky
Do mass update of mpfs.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update gid.c new cmd interfaceLeon Romanovsky
Do mass update of gid.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update lag.c new cmd interfaceLeon Romanovsky
Do mass update of lag.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update fw.c new cmd interfaceLeon Romanovsky
Do mass update of fw.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update fs_core new cmd interfaceLeon Romanovsky
Do mass update of fs_core to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update FPGA to new cmd interfaceLeon Romanovsky
Do mass update of FPGA to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update eswitch to new cmd interfaceLeon Romanovsky
Do mass update of eswitch to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update statistics to new cmd interfaceLeon Romanovsky
Do mass update of statistics to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update eq.c to new cmd interfaceLeon Romanovsky
Do mass update of eq.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update ecpf.c to new cmd interfaceLeon Romanovsky
Do mass update of ecpf.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update debugfs.c to new cmd interfaceLeon Romanovsky
Do mass update of debugfs.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update cq.c to new cmd interfaceLeon Romanovsky
Do mass update of cq.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-23net/mlx5: Update vport.c to new cmd interfaceLeon Romanovsky
Do mass update of vport.c to reuse newly introduced mlx5_cmd_exec_in*() interfaces. Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19net/mlx5: Enable SW-defined RoCEv2 UDP source portMark Zhang
When this is enabled, UDP source port for RoCEv2 packets are defined by software instead of firmware. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19net/mlx5: Refactor HCA capability set flowLeon Romanovsky
Reduce the amount of kzalloc/kfree cycles by allocating command structure in the parent function and leverage the knowledge that set_caps() is called for HCA capabilities only with specific HW structure as parameter to calculate mailbox size. Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19net/mlx5: Move QP logic to mlx5_ibLeon Romanovsky
The mlx5_core doesn't need any functionality coded in qp.c, so move that file to drivers/infiniband/ be under mlx5_ib responsibility. Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19RDMA/mlx5: Alphabetically sort build artifactsLeon Romanovsky
Sort .o objects in makefile to make addition of new object less cumbersome. Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19net/mlx5: Delete not-used cmd headerLeon Romanovsky
The structures defined in the cmd header are not used and can be safely removed from the driver. This patch removes that file and deletes all relevant includes. Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19RDMA/mlx5: Delete Q counter allocations commandLeon Romanovsky
Remove mlx5_ib implementation of Q counter allocation logic together with cleaning boolean which controlled validity of the counter. It is not needed, because counter_id == 0 means that counter is not valid. Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19net/mlx5: Remove Q counter low level helper APIsLeon Romanovsky
mlx5 core users are encouraged to use low level API (mlx5_cmd_exec) without the need of helper functions, do this for q counters, remove helper functions and call mlx5_cmd_exec directly from users. This will help reduce the total amount of code and reduction of the mlx5_core symbol table. Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19net/mlx5: Replace hand written QP context struct with automatic gettersLeon Romanovsky
By changing debugfs to not use any QP related API, convert the debugfs code to use MLX5_GET() directly to access QP context instead of hand written struct. Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19net/mlx5: Remove extra indirection while storing QPNLeon Romanovsky
The FPGA, SW steering and IPoIB need to have only QPN from the mlx5_core_qp struct, so reduce memory footprint by storing QPN directly. Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19net/mlx5: Open-code modify QP in the IPoIB moduleLeon Romanovsky
Remove dependency on qp.c from the IPoIB by open coding modify QP interface. Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19net/mlx5: Open-code modify QP in the FPGA moduleLeon Romanovsky
Remove dependency on qp.c from the FPGA by open coding modify QP interface. Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19net/mlx5: Open-code modify QP in steering moduleLeon Romanovsky
Remove dependency on qp.c from SW steering by open coding modify QP interface. Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19net/mlx5: Remove empty QP and CQ events handlersLeon Romanovsky
The QP and CQ events functions do nothing except printing some debug messages. There is nothing to do with this knowledge and such events, so remove them. Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19net/mlx5: Open-code create and destroy QP callsLeon Romanovsky
FPGA, IPoIB and SW steering don't need anything from the mlx5_core_create_qp() and mlx5_core_destroy_qp() except calls to mlx5_cmd_exec(). Let's open-code it, so we will be able to move qp.c to mlx5_ib. Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-19net/mlx5: Provide simplified command interfacesLeon Romanovsky
Many mlx5_cmd_exec() callers are not interested in the output from that command or have standard in/out structures. Those callers simply allocate those structure on the stack and use sizeof() to provide in/out arguments. In this naive approach provide simplified versions of mlx5_cmd_exec(). Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2020-04-12Linux 5.7-rc1v5.7-rc1Linus Torvalds
2020-04-12MAINTAINERS: sort field names for all entriesLinus Torvalds
This sorts the actual field names too, potentially causing even more chaos and confusion at merge time if you have edited the MAINTAINERS file. But the end result is a more consistent layout, and hopefully it's a one-time pain minimized by doing this just before the -rc1 release. This was entirely scripted: ./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order Requested-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-12MAINTAINERS: sort entries by entry nameLinus Torvalds
They are all supposed to be sorted, but people who add new entries don't always know the alphabet. Plus sometimes the entry names get edited, and people don't then re-order the entry. Let's see how painful this will be for merging purposes (the MAINTAINERS file is often edited in various different trees), but Joe claims there's relatively few patches in -next that touch this, and doing it just before -rc1 is likely the best time. Fingers crossed. This was scripted with /scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS but then I also ended up manually upper-casing a few entry names that stood out when looking at the end result. Requested-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 16:06:23 +0000