summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-05Merge tag 'omap-for-v4.18/fixes-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omap for v4.18-rc cycle Few dts fixes for regressions for various SoCs and devices for touchscreen wake, dra7 USB quirk, pinmux for beaglebone mmc, and emac clock. Also included is a change for ti-sysc to use kcalloc that Kees wanted to get into v4.18 as that's the last one he wanted to fix for improved defense against allocation overflows. * tag 'omap-for-v4.18/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap3: Fix am3517 mdio and emac clock references ARM: dts: am335x-bone-common: Fix mmc0 Write Protect bus: ti-sysc: Use 2-factor allocator arguments ARM: dts: dra7: Disable metastability workaround for USB2 ARM: dts: am437x: make edt-ft5x06 a wakeup source Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-05Fix up non-directory creation in SGID directoriesLinus Torvalds
sgid directories have special semantics, making newly created files in the directory belong to the group of the directory, and newly created subdirectories will also become sgid. This is historically used for group-shared directories. But group directories writable by non-group members should not imply that such non-group members can magically join the group, so make sure to clear the sgid bit on non-directories for non-members (but remember that sgid without group execute means "mandatory locking", just to confuse things even more). Reported-by: Jann Horn <jannh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-05Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up ↵Christoph Hellwig
intel_{alloc,free}_coherent()" This commit may cause a less than required dma mask to be used for some allocations, which apparently leads to module load failures for iwlwifi sometimes. This reverts commit d657c5c73ca987214a6f9436e435b34fc60f332a. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Fabio Coatti <fabio.coatti@gmail.com> Tested-by: Fabio Coatti <fabio.coatti@gmail.com>
2018-07-05cifs: Fix stack out-of-bounds in smb{2,3}_create_lease_buf()Stefano Brivio
smb{2,3}_create_lease_buf() store a lease key in the lease context for later usage on a lease break. In most paths, the key is currently sourced from data that happens to be on the stack near local variables for oplock in SMB2_open() callers, e.g. from open_shroot(), whereas smb2_open_file() properly allocates space on its stack for it. The address of those local variables holding the oplock is then passed to create_lease_buf handlers via SMB2_open(), and 16 bytes near oplock are used. This causes a stack out-of-bounds access as reported by KASAN on SMB2.1 and SMB3 mounts (first out-of-bounds access is shown here): [ 111.528823] BUG: KASAN: stack-out-of-bounds in smb3_create_lease_buf+0x399/0x3b0 [cifs] [ 111.530815] Read of size 8 at addr ffff88010829f249 by task mount.cifs/985 [ 111.532838] CPU: 3 PID: 985 Comm: mount.cifs Not tainted 4.18.0-rc3+ #91 [ 111.534656] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 111.536838] Call Trace: [ 111.537528] dump_stack+0xc2/0x16b [ 111.540890] print_address_description+0x6a/0x270 [ 111.542185] kasan_report+0x258/0x380 [ 111.544701] smb3_create_lease_buf+0x399/0x3b0 [cifs] [ 111.546134] SMB2_open+0x1ef8/0x4b70 [cifs] [ 111.575883] open_shroot+0x339/0x550 [cifs] [ 111.591969] smb3_qfs_tcon+0x32c/0x1e60 [cifs] [ 111.617405] cifs_mount+0x4f3/0x2fc0 [cifs] [ 111.674332] cifs_smb3_do_mount+0x263/0xf10 [cifs] [ 111.677915] mount_fs+0x55/0x2b0 [ 111.679504] vfs_kern_mount.part.22+0xaa/0x430 [ 111.684511] do_mount+0xc40/0x2660 [ 111.698301] ksys_mount+0x80/0xd0 [ 111.701541] do_syscall_64+0x14e/0x4b0 [ 111.711807] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 111.713665] RIP: 0033:0x7f372385b5fa [ 111.715311] Code: 48 8b 0d 99 78 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 66 78 2c 00 f7 d8 64 89 01 48 [ 111.720330] RSP: 002b:00007ffff27049d8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 111.722601] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f372385b5fa [ 111.724842] RDX: 000055c2ecdc73b2 RSI: 000055c2ecdc73f9 RDI: 00007ffff270580f [ 111.727083] RBP: 00007ffff2705804 R08: 000055c2ee976060 R09: 0000000000001000 [ 111.729319] R10: 0000000000000000 R11: 0000000000000206 R12: 00007f3723f4d000 [ 111.731615] R13: 000055c2ee976060 R14: 00007f3723f4f90f R15: 0000000000000000 [ 111.735448] The buggy address belongs to the page: [ 111.737420] page:ffffea000420a7c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 111.739890] flags: 0x17ffffc0000000() [ 111.741750] raw: 0017ffffc0000000 0000000000000000 dead000000000200 0000000000000000 [ 111.744216] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 111.746679] page dumped because: kasan: bad access detected [ 111.750482] Memory state around the buggy address: [ 111.752562] ffff88010829f100: 00 f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 00 [ 111.754991] ffff88010829f180: 00 00 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 [ 111.757401] >ffff88010829f200: 00 00 00 00 00 f1 f1 f1 f1 01 f2 f2 f2 f2 f2 f2 [ 111.759801] ^ [ 111.762034] ffff88010829f280: f2 02 f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 [ 111.764486] ffff88010829f300: f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 111.766913] ================================================================== Lease keys are however already generated and stored in fid data on open and create paths: pass them down to the lease context creation handlers and use them. Suggested-by: Aurélien Aptel <aaptel@suse.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Fixes: b8c32dbb0deb ("CIFS: Request SMB2.1 leases") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05cifs: Fix infinite loop when using hard mount optionPaulo Alcantara
For every request we send, whether it is SMB1 or SMB2+, we attempt to reconnect tcon (cifs_reconnect_tcon or smb2_reconnect) before carrying out the request. So, while server->tcpStatus != CifsNeedReconnect, we wait for the reconnection to succeed on wait_event_interruptible_timeout(). If it returns, that means that either the condition was evaluated to true, or timeout elapsed, or it was interrupted by a signal. Since we're not handling the case where the process woke up due to a received signal (-ERESTARTSYS), the next call to wait_event_interruptible_timeout() will _always_ fail and we end up looping forever inside either cifs_reconnect_tcon() or smb2_reconnect(). Here's an example of how to trigger that: $ mount.cifs //foo/share /mnt/test -o username=foo,password=foo,vers=1.0,hard (break connection to server before executing bellow cmd) $ stat -f /mnt/test & sleep 140 [1] 2511 $ ps -aux -q 2511 USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 2511 0.0 0.0 12892 1008 pts/0 S 12:24 0:00 stat -f /mnt/test $ kill -9 2511 (wait for a while; process is stuck in the kernel) $ ps -aux -q 2511 USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 2511 83.2 0.0 12892 1008 pts/0 R 12:24 30:01 stat -f /mnt/test By using 'hard' mount point means that cifs.ko will keep retrying indefinitely, however we must allow the process to be killed otherwise it would hang the system. Signed-off-by: Paulo Alcantara <palcantara@suse.de> Cc: stable@vger.kernel.org Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE settingStefano Brivio
A "small" CIFS buffer is not big enough in general to hold a setacl request for SMB2, and we end up overflowing the buffer in send_set_info(). For instance: # mount.cifs //127.0.0.1/test /mnt/test -o username=test,password=test,nounix,cifsacl # touch /mnt/test/acltest # getcifsacl /mnt/test/acltest REVISION:0x1 CONTROL:0x9004 OWNER:S-1-5-21-2926364953-924364008-418108241-1000 GROUP:S-1-22-2-1001 ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff ACL:S-1-22-2-1001:ALLOWED/0x0/R ACL:S-1-22-2-1001:ALLOWED/0x0/R ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff ACL:S-1-1-0:ALLOWED/0x0/R # setcifsacl -a "ACL:S-1-22-2-1004:ALLOWED/0x0/R" /mnt/test/acltest this setacl will cause the following KASAN splat: [ 330.777927] BUG: KASAN: slab-out-of-bounds in send_set_info+0x4dd/0xc20 [cifs] [ 330.779696] Write of size 696 at addr ffff88010d5e2860 by task setcifsacl/1012 [ 330.781882] CPU: 1 PID: 1012 Comm: setcifsacl Not tainted 4.18.0-rc2+ #2 [ 330.783140] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 330.784395] Call Trace: [ 330.784789] dump_stack+0xc2/0x16b [ 330.786777] print_address_description+0x6a/0x270 [ 330.787520] kasan_report+0x258/0x380 [ 330.788845] memcpy+0x34/0x50 [ 330.789369] send_set_info+0x4dd/0xc20 [cifs] [ 330.799511] SMB2_set_acl+0x76/0xa0 [cifs] [ 330.801395] set_smb2_acl+0x7ac/0xf30 [cifs] [ 330.830888] cifs_xattr_set+0x963/0xe40 [cifs] [ 330.840367] __vfs_setxattr+0x84/0xb0 [ 330.842060] __vfs_setxattr_noperm+0xe6/0x370 [ 330.843848] vfs_setxattr+0xc2/0xd0 [ 330.845519] setxattr+0x258/0x320 [ 330.859211] path_setxattr+0x15b/0x1b0 [ 330.864392] __x64_sys_setxattr+0xc0/0x160 [ 330.866133] do_syscall_64+0x14e/0x4b0 [ 330.876631] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 330.878503] RIP: 0033:0x7ff2e507db0a [ 330.880151] Code: 48 8b 0d 89 93 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 bc 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 56 93 2c 00 f7 d8 64 89 01 48 [ 330.885358] RSP: 002b:00007ffdc4903c18 EFLAGS: 00000246 ORIG_RAX: 00000000000000bc [ 330.887733] RAX: ffffffffffffffda RBX: 000055d1170de140 RCX: 00007ff2e507db0a [ 330.890067] RDX: 000055d1170de7d0 RSI: 000055d115b39184 RDI: 00007ffdc4904818 [ 330.892410] RBP: 0000000000000001 R08: 0000000000000000 R09: 000055d1170de7e4 [ 330.894785] R10: 00000000000002b8 R11: 0000000000000246 R12: 0000000000000007 [ 330.897148] R13: 000055d1170de0c0 R14: 0000000000000008 R15: 000055d1170de550 [ 330.901057] Allocated by task 1012: [ 330.902888] kasan_kmalloc+0xa0/0xd0 [ 330.904714] kmem_cache_alloc+0xc8/0x1d0 [ 330.906615] mempool_alloc+0x11e/0x380 [ 330.908496] cifs_small_buf_get+0x35/0x60 [cifs] [ 330.910510] smb2_plain_req_init+0x4a/0xd60 [cifs] [ 330.912551] send_set_info+0x198/0xc20 [cifs] [ 330.914535] SMB2_set_acl+0x76/0xa0 [cifs] [ 330.916465] set_smb2_acl+0x7ac/0xf30 [cifs] [ 330.918453] cifs_xattr_set+0x963/0xe40 [cifs] [ 330.920426] __vfs_setxattr+0x84/0xb0 [ 330.922284] __vfs_setxattr_noperm+0xe6/0x370 [ 330.924213] vfs_setxattr+0xc2/0xd0 [ 330.926008] setxattr+0x258/0x320 [ 330.927762] path_setxattr+0x15b/0x1b0 [ 330.929592] __x64_sys_setxattr+0xc0/0x160 [ 330.931459] do_syscall_64+0x14e/0x4b0 [ 330.933314] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 330.936843] Freed by task 0: [ 330.938588] (stack is not available) [ 330.941886] The buggy address belongs to the object at ffff88010d5e2800 which belongs to the cache cifs_small_rq of size 448 [ 330.946362] The buggy address is located 96 bytes inside of 448-byte region [ffff88010d5e2800, ffff88010d5e29c0) [ 330.950722] The buggy address belongs to the page: [ 330.952789] page:ffffea0004357880 count:1 mapcount:0 mapping:ffff880108fdca80 index:0x0 compound_mapcount: 0 [ 330.955665] flags: 0x17ffffc0008100(slab|head) [ 330.957760] raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff880108fdca80 [ 330.960356] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 330.963005] page dumped because: kasan: bad access detected [ 330.967039] Memory state around the buggy address: [ 330.969255] ffff88010d5e2880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 330.971833] ffff88010d5e2900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 330.974397] >ffff88010d5e2980: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 330.976956] ^ [ 330.979226] ffff88010d5e2a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 330.981755] ffff88010d5e2a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 330.984225] ================================================================== Fix this by allocating a regular CIFS buffer in smb2_plain_req_init() if the request command is SMB2_SET_INFO. Reported-by: Jianhong Yin <jiyin@redhat.com> Fixes: 366ed846df60 ("cifs: Use smb 2 - 3 and cifsacl mount options setacl function") CC: Stable <stable@vger.kernel.org> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-and-tested-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05cifs: Fix memory leak in smb2_set_ea()Paulo Alcantara
This patch fixes a memory leak when doing a setxattr(2) in SMB2+. Signed-off-by: Paulo Alcantara <palcantara@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-07-05cifs: fix SMB1 breakageRonnie Sahlberg
SMB1 mounting broke in commit 35e2cc1ba755 ("cifs: Use correct packet length in SMB2_TRANSFORM header") Fix it and also rename smb2_rqst_len to smb_rqst_len to make it less unobvious that the function is also called from CIFS/SMB1 Good job by Paulo reviewing and cleaning up Ronnie's original patch. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Paulo Alcantara <palcantara@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05cifs: Fix validation of signed data in smb2Paulo Alcantara
Fixes: c713c8770fa5 ("cifs: push rfc1002 generation down the stack") We failed to validate signed data returned by the server because __cifs_calc_signature() now expects to sign the actual data in iov but we were also passing down the rfc1002 length. Fix smb3_calc_signature() to calculate signature of rfc1002 length prior to passing only the actual data iov[1-N] to __cifs_calc_signature(). In addition, there are a few cases where no rfc1002 length is passed so we make sure there's one (iov_len == 4). Signed-off-by: Paulo Alcantara <palcantara@suse.de> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05cifs: Fix validation of signed data in smb3+Paulo Alcantara
Fixes: c713c8770fa5 ("cifs: push rfc1002 generation down the stack") We failed to validate signed data returned by the server because __cifs_calc_signature() now expects to sign the actual data in iov but we were also passing down the rfc1002 length. Fix smb3_calc_signature() to calculate signature of rfc1002 length prior to passing only the actual data iov[1-N] to __cifs_calc_signature(). In addition, there are a few cases where no rfc1002 length is passed so we make sure there's one (iov_len == 4). Signed-off-by: Paulo Alcantara <palcantara@suse.de> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05cifs: Fix use after free of a mid_q_entryLars Persson
With protocol version 2.0 mounts we have seen crashes with corrupt mid entries. Either the server->pending_mid_q list becomes corrupt with a cyclic reference in one element or a mid object fetched by the demultiplexer thread becomes overwritten during use. Code review identified a race between the demultiplexer thread and the request issuing thread. The demultiplexer thread seems to be written with the assumption that it is the sole user of the mid object until it calls the mid callback which either wakes the issuer task or deletes the mid. This assumption is not true because the issuer task can be woken up earlier by a signal. If the demultiplexer thread has proceeded as far as setting the mid_state to MID_RESPONSE_RECEIVED then the issuer thread will happily end up calling cifs_delete_mid while the demultiplexer thread still is using the mid object. Inserting a delay in the cifs demultiplexer thread widens the race window and makes reproduction of the race very easy: if (server->large_buf) buf = server->bigbuf; + usleep_range(500, 4000); server->lstrp = jiffies; To resolve this I think the proper solution involves putting a reference count on the mid object. This patch makes sure that the demultiplexer thread holds a reference until it has finished processing the transaction. Cc: stable@vger.kernel.org Signed-off-by: Lars Persson <larper@axis.com> Acked-by: Paulo Alcantara <palcantara@suse.de> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05autofs: rename 'autofs' module back to 'autofs4'Linus Torvalds
It turns out that systemd has a bug: it wants to load the autofs module early because of some initialization ordering with udev, and it doesn't do that correctly. Everywhere else it does the proper "look up module name" that does the proper alias resolution, but in that early code, it just uses a hardcoded "autofs4" for the module name. The result of that is that as of commit a2225d931f75 ("autofs: remove left-over autofs4 stubs"), you get systemd[1]: Failed to insert module 'autofs4': No such file or directory in the system logs, and a lack of module loading. All this despite the fact that we had very clearly marked 'autofs4' as an alias for this module. What's so ridiculous about this is that literally everything else does the module alias handling correctly, including really old versions of systemd (that just used 'modprobe' to do this), and even all the other systemd module loading code. Only that special systemd early module load code is broken, hardcoding the module names for not just 'autofs4', but also "ipv6", "unix", "ip_tables" and "virtio_rng". Very annoying. Instead of creating an _additional_ separate compatibility 'autofs4' module, just rely on the fact that everybody else gets this right, and just call the module 'autofs4' for compatibility reasons, with 'autofs' as the alias name. That will allow the systemd people to fix their bugs, adding the proper alias handling, and maybe even fix the name of the module to be just "autofs" (so that they can _test_ the alias handling). And eventually, we can revert this silly compatibility hack. See also https://github.com/systemd/systemd/issues/9501 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=902946 for the systemd bug reports upstream and in the Debian bug tracker respectively. Fixes: a2225d931f75 ("autofs: remove left-over autofs4 stubs") Reported-by: Ben Hutchings <ben@decadent.org.uk> Reported-by: Michael Biebl <biebl@debian.org> Cc: Ian Kent <raven@themaw.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-05arm64: remove no-op -p linker flagGreg Hackmann
Linking the ARM64 defconfig kernel with LLVM lld fails with the error: ld.lld: error: unknown argument: -p Makefile:1015: recipe for target 'vmlinux' failed Without this flag, the ARM64 defconfig kernel successfully links with lld and boots on Dragonboard 410c. After digging through binutils source and changelogs, it turns out that -p is only relevant to ancient binutils installations targeting 32-bit ARM. binutils accepts -p for AArch64 too, but it's always been undocumented and silently ignored. A comment in ld/emultempl/aarch64elf.em explains that it's "Only here for backwards compatibility". Since this flag is a no-op on ARM64, we can safely drop it. Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-07-05Merge tag 'acpi-4.18-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix a recent ACPICA regression, fix a battery driver regression introduced during the 4.17 cycle and fix up the recently added support for the PPTT ACPI table. Specifics: - Revert part of a recent ACPICA regression fix that added leading newlines to ACPICA error messages and made the kernel log look broken (Rafael Wysocki). - Fix an ACPI battery driver regression introduced during the 4.17 cycle due to incorrect error handling that made Thinkpad 13 laptops crash on boot (Jouke Witteveen). - Fix up the recently added PPTT ACPI table support by covering the case when a PPTT structure represents a processors group correctly (Sudeep Holla)" * tag 'acpi-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / battery: Safe unregistering of hooks ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set ACPICA: Drop leading newlines from error messages
2018-07-05Merge tag 'pm-4.18-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a PCI power management regression introduced during the 4.17 cycle and fix up the recently added support for devices in multiple power domains. Specifics: - Resume parallel PCI (non-PCIe) bridges on suspend-to-RAM (ACP S3) to avoid confusing the platform firmware which started to happen after a core power management regression fix that went in during the 4.17 cycle (Rafael Wysocki). - Fix up the recently added support for devices in multiple power domains by avoiding to power up the entire domain unnecessarily when attaching a device to it (Ulf Hansson)" * tag 'pm-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Domains: Don't power on at attach for the multi PM domain case PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM
2018-07-05Merge tag 'riscv-for-linus-4.18-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V fixes from Palmer Dabbelt: "This contains a handful of fixes for the RISC-V port: - A fix to R_RISCV_ADD32/R_RISCV_SUB32 relocations that allows modules that use these to load correctly. - The removal of of_platform_populate(), which is obselete. - The removal of irq-riscv-intc.h, which is obselete. - A fix to PTRACE_SETREGSET. - Fixes that allow the RV32I kernel to build (at least for Zong, I've got another patch on the mailing list that's necessary on my setup :)). I've just given these a defconfig build test" * tag 'riscv-for-linus-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: RISC-V: Fix PTRACE_SETREGSET bug. RISC-V: Don't include irq-riscv-intc.h riscv: remove unnecessary of_platform_populate call RISC-V: fix R_RISCV_ADD32/R_RISCV_SUB32 relocations RISC-V: Change variable type for 32-bit compatible RISC-V: Add definiion of extract symbol's index and type for 32-bit RISC-V: Select GENERIC_UCMPDI2 on RV32I RISC-V: Add conditional macro for zone of DMA32
2018-07-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu fix from Greg Ungerer: "A single fix for breakage introduced in this merge window" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: fix "bad page state" oops on ColdFire boot
2018-07-05drm/amd/display: add a check for display depth validityMikita Lipski
[why] HDMI 2.0 fails to validate 4K@60 timing with 10 bpc [how] Adding a helper function that would verify if the display depth assigned would pass a bandwidth validation. Drop the display depth by one level till calculated pixel clk is lower than maximum TMDS clk. Bugzilla: https://bugs.freedesktop.org/106959 Tested-by: Mike Lothian <mike@fireburn.co.uk> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05drm/amd/display: adding ycbcr420 pixel encoding for hdmiMikita Lipski
[why] HDMI EDID's VSDB contains spectial timings for specifically YCbCr 4:2:0 colour space. In those cases we need to verify if the mode provided is one of the special ones has to use YCbCr 4:2:0 pixel encoding for display info. [how] Verify if the mode is using specific ycbcr420 colour space with the help of DRM helper function and assign the mode to use ycbcr420 pixel encoding. Tested-by: Mike Lothian <mike@fireburn.co.uk> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-05Merge branches 'acpi-tables' and 'acpica'Rafael J. Wysocki
Merge ACPICA regression fix and a fix for the recently added PPTT support. * acpi-tables: ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set * acpica: ACPICA: Drop leading newlines from error messages
2018-07-05Merge branch 'pm-pci'Rafael J. Wysocki
Merge a PCI power management regression fix. * pm-pci: PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM
2018-07-05drm/udl: fix display corruption of the last lineMikulas Patocka
The displaylink hardware has such a peculiarity that it doesn't render a command until next command is received. This produces occasional corruption, such as when setting 22x11 font on the console, only the first line of the cursor will be blinking if the cursor is located at some specific columns. When we end up with a repeating pixel, the driver has a bug that it leaves one uninitialized byte after the command (and this byte is enough to flush the command and render it - thus it fixes the screen corruption), however whe we end up with a non-repeating pixel, there is no byte appended and this results in temporary screen corruption. This patch fixes the screen corruption by always appending a byte 0xAF at the end of URB. It also removes the uninitialized byte. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-07-04arm64: add endianness option to LDFLAGS instead of LDMasahiro Yamada
With the recent syntax extension, Kconfig is now able to evaluate the compiler / toolchain capability. However, accumulating flags to 'LD' is not compatible with the way it works; 'LD' must be passed to Kconfig to call $(ld-option,...) from Kconfig files. If you tweak 'LD' in arch Makefile depending on CONFIG_CPU_BIG_ENDIAN, this would end up with circular dependency between Makefile and Kconfig. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-07-04RISC-V: Fix the rv32i kernel buildPalmer Dabbelt
These patches for building 32-bit RISC-V kernel. - Fix the compile errors and warnings on RV32I. - Fix some incompatible problem on RV32I. - Add format.h for compatible of print format. The fixed width integer types format for Elf_Addr will move to generic header by another patch. For now, there are some warning about unexpected argument of type on RV32I. Change in v1: - Fix some error in v1 - Remove implementation of fixed width integer types format for Elf_Addr.
2018-07-04RISC-V: Fix PTRACE_SETREGSET bug.Jim Wilson
In riscv_gpr_set, pass regs instead of &regs to user_regset_copyin to fix gdb segfault. Signed-off-by: Jim Wilson <jimw@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: Don't include irq-riscv-intc.hPalmer Dabbelt
This file has never existed in the upstream kernel, but it's guarded by an #ifdef that's also never existed in the upstream kernel. As a part of our interrupt controller refactoring this header is no longer necessary, but this reference managed to sneak in anyway. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04riscv: remove unnecessary of_platform_populate callRob Herring
The DT core will call of_platform_default_populate, so it is not necessary for arch specific code to call it unless there are custom match entries, auxdata or parent device. Neither of those apply here, so remove the call. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: linux-riscv@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: fix R_RISCV_ADD32/R_RISCV_SUB32 relocationsAndreas Schwab
The R_RISCV_ADD32/R_RISCV_SUB32 relocations should add/subtract the address of the symbol (without overflow check), not its contents. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: Change variable type for 32-bit compatibleZong Li
Signed-off-by: Zong Li <zong@andestech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: Add definiion of extract symbol's index and type for 32-bitZong Li
Use generic marco to get the index and type of symbol. Signed-off-by: Zong Li <zong@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: Select GENERIC_UCMPDI2 on RV32IZong Li
On 32-bit, it need to use __ucmpdi2, otherwise, it can't find the __ucmpdi2 symbol. Signed-off-by: Zong Li <zong@andestech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: Add conditional macro for zone of DMA32Zong Li
The DMA32 is for 64-bit usage. Signed-off-by: Zong Li <zong@andestech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04sample/vfio-mdev: Change return type to vm_fault_tSouptick Joarder
convert mbochs_region_vm_fault and mbochs_dmabuf_vm_fault to return vm_fault_t type. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-07-04arm64: Use aarch64elf and aarch64elfb emulation mode variantsPaul Kocialkowski
The aarch64linux and aarch64linuxb emulation modes are not supported by bare-metal toolchains and Linux using them forbids building the kernel with these toolchains. Since there is apparently no reason to target these emulation modes, the more generic elf modes are used instead, allowing to build on bare-metal toolchains as well as the already-supported ones. Fixes: 3d6a7b99e3fa ("arm64: ensure the kernel is compiled for LP64") Cc: stable@vger.kernel.org Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-07-04drm/bridge/sii8620: Fix link mode selectionMaciej Purski
Current link mode values do not allow to enable packed pixel modes. Select packed pixel clock mode, if needed, every time the link mode register gets updated. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-4-git-send-email-m.purski@samsung.com
2018-07-04drm/bridge/sii8620: Fix display of packed pixel modesMaciej Purski
Current implementation does not guarantee packed pixel modes working with every dongle. There are some dongles, which require selecting the output mode explicitly. Write proper values to registers in packed_pixel mode, based on how it is done in vendor's code. Select output color space: RGB (no packed pixel) or YCBCR422 (packed pixel). This reverts commit e8b92efa629dac0e70ea4145c5e70616de5f89c8 ("drm/bridge/sii8620: fix display of packed pixel modes in MHL2"). Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-3-git-send-email-m.purski@samsung.com
2018-07-04drm/bridge/sii8620: Send AVI infoframe in all MHL versionsMaciej Purski
Currently AVI infoframe is sent only in MHL3. However, some MHL2 dongles need AVI infoframe to work correctly in either packed pixel mode or non-packed pixel mode. Send AVI infoframe in set_infoframes() in every case. Create an infoframe using drm_hdmi_infoframe_from_display_mode() instead of manually filling each infoframe structure's field. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-2-git-send-email-m.purski@samsung.com
2018-07-04ACPI / battery: Safe unregistering of hooksJouke Witteveen
A hooking API was implemented for 4.17 in fa93854f7a7ed63d followed by hooks for Thinkpad laptops in 2801b9683f740012. The Thinkpad drivers did not support the Thinkpad 13 and the hooking API crashes on unsupported batteries by altering a list of hooks during unsafe iteration. Thus, Thinkpad 13 laptops could no longer boot. Additionally, a lock was kept in place and debugging information was printed out of order. Fixes: fa93854f7a7e (battery: Add the battery hooking API) Cc: 4.17+ <stable@vger.kernel.org> # 4.17+ Signed-off-by: Jouke Witteveen <j.witteveen@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-04drm/amdgpu: fix user fence write race conditionNicolai Hähnle
The buffer object backing the user fence is reserved using the non-user fence, i.e., as soon as the non-user fence is signaled, the user fence buffer object can be moved or even destroyed. Therefore, emit the user fence first. Both fences have the same cache invalidation behavior, so this should have no user-visible effect. Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-07-04s390: wire up rseq system callHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-04s390: wire up io_pgetevents system callHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-03mm: teach dump_page() to correctly output poisoned struct pagesPavel Tatashin
If struct page is poisoned, and uninitialized access is detected via PF_POISONED_CHECK(page) dump_page() is called to output the page. But, the dump_page() itself accesses struct page to determine how to print it, and therefore gets into a recursive loop. For example: dump_page() __dump_page() PageSlab(page) PF_POISONED_CHECK(page) VM_BUG_ON_PGFLAGS(PagePoisoned(page), page) dump_page() recursion loop. Link: http://lkml.kernel.org/r/20180702180536.2552-1-pasha.tatashin@oracle.com Fixes: f165b378bbdf ("mm: uninitialized struct page poisoning sanity checking") Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-03ARM: disable KCOV for trusted foundations codeArnd Bergmann
The ARM trusted foundations code is currently broken in linux-next when CONFIG_KCOV_INSTRUMENT_ALL is set: /tmp/ccHdQsCI.s: Assembler messages: /tmp/ccHdQsCI.s:37: Error: .err encountered /tmp/ccHdQsCI.s:38: Error: .err encountered /tmp/ccHdQsCI.s:39: Error: .err encountered scripts/Makefile.build:311: recipe for target 'arch/arm/firmware/trusted_foundations.o' failed I could not find a function attribute that lets me disable -fsanitize-coverage=trace-pc for just one function, so this turns it off for the entire file instead. Link: http://lkml.kernel.org/r/20180529103636.1535457-1-arnd@arndb.de Fixes: 758517202bd2e4 ("arm: port KCOV to arm") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Olof Johansson <olof@lixom.net> Tested-by: Olof Johansson <olof@lixom.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-03kasan: fix shadow_size calculation error in kasan_module_allocZhen Lei
There is a special case that the size is "(N << KASAN_SHADOW_SCALE_SHIFT) Pages plus X", the value of X is [1, KASAN_SHADOW_SCALE_SIZE-1]. The operation "size >> KASAN_SHADOW_SCALE_SHIFT" will drop X, and the roundup operation can not retrieve the missed one page. For example: size=0x28006, PAGE_SIZE=0x1000, KASAN_SHADOW_SCALE_SHIFT=3, we will get shadow_size=0x5000, but actually we need 6 pages. shadow_size = round_up(size >> KASAN_SHADOW_SCALE_SHIFT, PAGE_SIZE); This can lead to a kernel crash when kasan is enabled and the value of mod->core_layout.size or mod->init_layout.size is like above. Because the shadow memory of X has not been allocated and mapped. move_module: ptr = module_alloc(mod->core_layout.size); ... memset(ptr, 0, mod->core_layout.size); //crashed Unable to handle kernel paging request at virtual address ffff0fffff97b000 ...... Call trace: __asan_storeN+0x174/0x1a8 memset+0x24/0x48 layout_and_allocate+0xcd8/0x1800 load_module+0x190/0x23e8 SyS_finit_module+0x148/0x180 Link: http://lkml.kernel.org/r/1529659626-12660-1-git-send-email-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Dmitriy Vyukov <dvyukov@google.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Libin <huawei.libin@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-03mm: hugetlb: yield when prepping struct pagesCannon Matthews
When booting with very large numbers of gigantic (i.e. 1G) pages, the operations in the loop of gather_bootmem_prealloc, and specifically prep_compound_gigantic_page, takes a very long time, and can cause a softlockup if enough pages are requested at boot. For example booting with 3844 1G pages requires prepping (set_compound_head, init the count) over 1 billion 4K tail pages, which takes considerable time. Add a cond_resched() to the outer loop in gather_bootmem_prealloc() to prevent this lockup. Tested: Booted with softlockup_panic=1 hugepagesz=1G hugepages=3844 and no softlockup is reported, and the hugepages are reported as successfully setup. Link: http://lkml.kernel.org/r/20180627214447.260804-1-cannonmatthews@google.com Signed-off-by: Cannon Matthews <cannonmatthews@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-03userfaultfd: hugetlbfs: fix userfaultfd_huge_must_wait() pte accessJanosch Frank
Use huge_ptep_get() to translate huge ptes to normal ptes so we can check them with the huge_pte_* functions. Otherwise some architectures will check the wrong values and will not wait for userspace to bring in the memory. Link: http://lkml.kernel.org/r/20180626132421.78084-1-frankja@linux.ibm.com Fixes: 369cd2121be4 ("userfaultfd: hugetlbfs: userfaultfd_huge_must_wait for hugepmd ranges") Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-03tracing: Fix missing return symbol in function_graph outputChangbin Du
The function_graph tracer does not show the interrupt return marker for the leaf entry. On leaf entries, we see an unbalanced interrupt marker (the interrupt was entered, but nevern left). Before: 1) | SyS_write() { 1) | __fdget_pos() { 1) 0.061 us | __fget_light(); 1) 0.289 us | } 1) | vfs_write() { 1) 0.049 us | rw_verify_area(); 1) + 15.424 us | __vfs_write(); 1) ==========> | 1) 6.003 us | smp_apic_timer_interrupt(); 1) 0.055 us | __fsnotify_parent(); 1) 0.073 us | fsnotify(); 1) + 23.665 us | } 1) + 24.501 us | } After: 0) | SyS_write() { 0) | __fdget_pos() { 0) 0.052 us | __fget_light(); 0) 0.328 us | } 0) | vfs_write() { 0) 0.057 us | rw_verify_area(); 0) | __vfs_write() { 0) ==========> | 0) 8.548 us | smp_apic_timer_interrupt(); 0) <========== | 0) + 36.507 us | } /* __vfs_write */ 0) 0.049 us | __fsnotify_parent(); 0) 0.066 us | fsnotify(); 0) + 50.064 us | } 0) + 50.952 us | } Link: http://lkml.kernel.org/r/1517413729-20411-1-git-send-email-changbin.du@intel.com Cc: stable@vger.kernel.org Fixes: f8b755ac8e0cc ("tracing/function-graph-tracer: Output arrows signal on hardirq call/return") Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-03ftrace: Nuke clear_ftrace_functionYisheng Xie
clear_ftrace_function is not used outside of ftrace.c and is not help to use a function, so nuke it per Steve's suggestion. Link: http://lkml.kernel.org/r/1517537689-34947-1-git-send-email-xieyisheng1@huawei.com Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-03tracing: Use __printf markup to silence compilerMathieu Malaterre
Silence warnings (triggered at W=1) by adding relevant __printf attributes. CC kernel/trace/trace.o kernel/trace/trace.c: In function ‘__trace_array_vprintk’: kernel/trace/trace.c:2979:2: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] len = vscnprintf(tbuffer, TRACE_BUF_SIZE, fmt, args); ^~~ AR kernel/trace/built-in.o Link: http://lkml.kernel.org/r/20180308205843.27447-1-malat@debian.org Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-03tracing: Optimize trace_buffer_iter() logicyuan linyu
Simplify and optimize the logic in trace_buffer_iter() to use a conditional operation instead of an if conditional. Link: http://lkml.kernel.org/r/20180408113631.3947-1-cugyly@163.com Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 19:22:05 +0000