summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-15arm64: dts: rockchip: Enable video output and HDMI on SOQuartzNicolas Frattaroli
This patch adds and enables the necessary device tree nodes to enable video output and HDMI functionality on the SOQuartz module. Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Link: https://lore.kernel.org/r/20221112160404.70868-3-frattaroli.nicolas@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-15arm64: dts: rockchip: Enable GPU on SOQuartz CM4Nicolas Frattaroli
This enables the Mali-G52 GPU on the SOQuartz CM4 module. Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Link: https://lore.kernel.org/r/20221112160404.70868-2-frattaroli.nicolas@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-11-15arm64: dts: renesas: r9a09g011: Add L2 Cache nodeBiju Das
The Cortex-A53 processor on RZ/V2M has 512 KB L2 Cache. Add L2 Cache node to SoC dtsi. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20221110160931.101539-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-11-15arm64: dts: renesas: rzv2mevk2: Enable watchdogFabrizio Castro
Enable the watchdog so that we can reboot the system. Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Link: https://lore.kernel.org/r/20221103223956.50575-4-fabrizio.castro.jz@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-11-15arm64: dts: renesas: r9a09g011: Add watchdog nodeFabrizio Castro
The r9a09g011 (a.k.a. RZ/V2M) comes with two watchdog IPs, but Linux is only allowed one. Add a node for the watchdog allowed to Linux to the SoC specific dtsi. Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Link: https://lore.kernel.org/r/20221103223956.50575-3-fabrizio.castro.jz@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-11-14arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi HeaderRahul T R
Add pinmux required to bring out i2c5 and gpios on 40 pin RPi header on sk board Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Rahul T R <r-ravikumar@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20221107070009.11500-3-r-ravikumar@ti.com
2022-11-14arm64: dts: ti: k3-j721e-main: Add dts nodes for EHRPWMsVijay Pothukuchi
Add dts nodes for 6 EHRPWM instances on SoC. Disable EHRPWM nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Includes a minor formatting fixup for the serdes node to line up the nodes appropriately. Signed-off-by: Vijay Pothukuchi <vijayp@ti.com> Signed-off-by: Rahul T R <r-ravikumar@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20221107070009.11500-2-r-ravikumar@ti.com
2022-11-15arm64: dts: Update cache properties for hisiliconPierre Gondois
The DeviceTree Specification v0.3 specifies that the cache node 'compatible' and 'cache-level' properties are 'required'. Cf. s3.8 Multi-level and Shared Cache Nodes The 'cache-unified' property should be present if one of the properties for unified cache is present ('cache-size', ...). Update the Device Trees accordingly. Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2022-11-15arm64: dts: Update cache properties for freescalePierre Gondois
The DeviceTree Specification v0.3 specifies that the cache node 'compatible' and 'cache-level' properties are 'required'. Cf. s3.8 Multi-level and Shared Cache Nodes The 'cache-unified' property should be present if one of the properties for unified cache is present ('cache-size', ...). Update the Device Trees accordingly. Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Chester Lin <clin@suse.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-14Merge branch 'riscv-visionfive_v1' into riscv-dt-for-nextConor Dooley
The VisionFive DT somehow never actually made it upstream, and is largely shared with the BeagleV. Better late than never. Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-11-14riscv: dts: microchip: fix the icicle's #pwm-cellsConor Dooley
\#pwm-cells for the Icicle kit's fabric PWM was incorrectly set to 2 & blindly overridden by the (out of tree) driver anyway. The core can support inverted operation, so update the entry to correctly report its capabilities. Fixes: 72560c6559b8 ("riscv: dts: microchip: add fpga fabric section to icicle kit") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2022-11-14Merge tag 'ux500-dts-for-v6.2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Some Ux500 DTS updates for v6.2: - Some cleanups from Krzysztof for the SPI nodes. - Fix up the NFC chip in Janice. - Drop a bogus power domain regulator that isn't used for the crypto blocks. (We use proper power domains now.) - Add GPS to the Kyle. * tag 'ux500-dts-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: ux500: Add GPS to the Kyle ARM: dts: DBx500 cryp and hash uses power domain ARM: dts: ux500: Fix up the Janice NFC chip ARM: dts: ste: ux500: align SPI node name with dtschema Link: https://lore.kernel.org/r/CACRpkdaXmmZWsGdTG5tqNragkoefcTeUHjR+ZwNyNaa0S7s-7Q@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-14Merge tag 'asahi-soc-dt-6.2' of https://github.com/AsahiLinux/linux into arm/dtArnd Bergmann
Apple SoC DT updates for 6.2. This includes new device trees for Apple M1 Pro/Max/Ultra SoCs and the devices that contain them, as well as some audio-related changes. * tag 'asahi-soc-dt-6.2' of https://github.com/AsahiLinux/linux: arm64: dts: apple: Add ADMAC resets on t8103/t600x dt-bindings: dma: apple,admac: Add reset arm64: dts: apple: t600x: Add MCA and its support arm64: dts: apple: t8103: Add MCA and its support arm64: dts: apple: t8103: Add AUDIO_P parent to the SIO_ADMA power domain arm64: dts: apple: Add J375 devicetrees arm64: dts: apple: Add J314 and J316 devicetrees arm64: dts: apple: Add initial t6000/t6001/t6002 DTs arm64: dts: apple: Fix j45x model years dt-bindings: arm: apple: Add t6001/t6002 Mac Studio compatibles dt-bindings: apple,aic2: Add CPU PMU per-cpu pseudo-interrupts dt-bindings: iommu: dart: add t6000 compatible Link: https://lore.kernel.org/r/dea10860-2870-3a9e-fa51-21e493b1573a@marcan.st Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-14arm: dts: spear600: Add ssp controller nodesKory Maincent
The SPEAr600 has three Synchronous serial port to enables synchronous serial communication with slave or master peripherals (SPI). Lets add these nodes to be able to use them. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-14arm: dts: spear600: Fix clcd interruptKory Maincent
Interrupt 12 of the Interrupt controller belongs to the SMI controller, the right one for the display controller is the interrupt 13. Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes") Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-14Merge tag 'at91-dt-6.2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt AT91 DT for 6.2 It contains: - interrupt support for ethernet PHYs on pcb8290 board - thermal management support for SAMA7G5 by adding OTP controller (that keeps temperature sensor calibration data), proper ADC bindings and describing thermal zones - securam node from SAMA7G5 is now described with generic name (sram) - remove of status = "okay" from SAM9X60-EK regulators * tag 'at91-dt-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9x60ek: remove status = "okay" for regulators ARM: dts: at91: sama7g5: use generic name for securam ARM: dts: at91: sama7g5: add thermal zones node ARM: dts: at91: sama7g5: add temperature sensor ARM: dts: at91: sama7g5: add cells for temperature calibration ARM: dts: at91: sama7g5: add io-channel-cells to adc node ARM: dts: at91: sama7g5: add otpc node ARM: dts: lan966x: Add interrupt support for PHYs on pcb8290 Link: https://lore.kernel.org/r/20221110115431.180908-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-14Merge tag 'dt-cleanup-6.2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM DTS for v6.2 1. Aspeed: fix qcom,dc-scm-v1-bmc compatible in the bindings. 2. Marvell: include bindings in maintainers entry. 3. Cleanup DTS according to bindings (panel endpoint unit address, incorrect spi-max-frequency, generic node names). 4. Few indentation fixes. * tag 'dt-cleanup-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: dt-bindings: arm: aspeed: adjust qcom,dc-scm-v1-bmc compatible after rename ARM: dts: sunxi: correct indentation ARM: dts: omap: correct indentation ARM: dts: kirkwood: correct indentation ARM: dts: armada: correct indentation ARM: dts: ti: correct indentation ARM: dts: aspeed: align SPI node name with dtschema MAINTAINERS: ARM: marvell: include bindings ARM: dts: sunplus: sp7021: drop incorrect spi-max-frequency ARM: dts: am335x: drop panel endpoint unit address Link: https://lore.kernel.org/r/20221110092111.18581-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-14Merge tag 'renesas-dt-bindings-for-v6.2-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DT binding updates for v6.2 - Move renesas.yaml from arm to soc, and document RZ/Five support. * tag 'renesas-dt-bindings-for-v6.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: dt-bindings: soc: renesas: renesas.yaml: Document Renesas RZ/Five SoC dt-bindings: soc: renesas: Move renesas.yaml from arm to soc Link: https://lore.kernel.org/r/cover.1667558749.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-14Merge tag 'renesas-arm-dt-for-v6.2-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas ARM DT updates for v6.2 - DMA, SPI (MSIOF), external interrupt (INTC-EX), PWM (PWM and TPU), SDHI, HyperFLASH/QSPI (RPC), and serial ((H)SCIF) support for the R-Car V4H SoC, - I/O expander, eMMC, and QSPI FLASH support for the White Hawk development board, - Preparatory work to share r9a07g043.dtsi between the ARM-based RZ/G2UL (R9A07G043U) and the RISC-V-based RZ/Five (R9A07G043F) SoCs, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v6.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (21 commits) arm64: dts: renesas: r9a07g043: Split out RZ/G2UL SoC specific parts arm64: dts: renesas: r9a07g043: Introduce SOC_PERIPHERAL_IRQ() macro to specify interrupt property ARM: dts: renesas: Miscellaneous whitespace fixes arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values arm64: dts: renesas: r8a779g0: Add remaining HSCIF nodes arm64: dts: renesas: r8a779g0: Add SCIF nodes arm64: dts: renesas: white-hawk-cpu: Add QSPI FLASH support arm64: dts: renesas: r8a779g0: Add RPC node arm64: dts: renesas: white-hawk-cpu: Add eMMC support arm64: dts: renesas: r8a779g0: Add SDHI node arm64: dts: renesas: rzg2l: Drop WDT2 nodes arm64: dts: renesas: r8a779g0: Add TPU device node arm64: dts: renesas: r8a779g0: Add PWM device nodes arm64: dts: renesas: r8a779g0: Fix HSCIF0 "brg_int" clock arm64: dts: renesas: condor-common: Add missing bootargs arm64: dts: renesas: white-hawk-cpu: Add PCA9654 I/O Expander arm64: dts: renesas: r8a779g0: Add INTC-EX node arm64: dts: renesas: r8a779g0: Add MSIOF nodes arm64: dts: renesas: r8a779g0: Add DMA support arm64: dts: renesas: rzg2ul-smarc: Move spi1 pinmux to carrier board DTSI ... Link: https://lore.kernel.org/r/cover.1667558740.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-14arm64: dts: imx8mm-phg: Add initial board supportFabio Estevam
Add the initial support for the i.MX8MM Cloos PHG board. This board uses a imx8mm-tqma8mqml SoM from TQ-Group. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-14dt-bindings: arm: fsl: Add an entry for Cloos PHG boardFabio Estevam
Add an entry for the i.MX8MM Cloos PHG board. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-14dt-bindings: vendor-prefixes: Add an entry for CloosFabio Estevam
Carl Cloos Schweisstechnik GmbH develops, manufactures and delivers welding industrial solutions: https://www.cloos.de/de-en/ Add a vendor prefix entry for it. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-14arm64: dts: imx8qxp-ss-lsio: add gpio-ranges propertyShenwei Wang
add gpio-ranges property for imx8qxp soc. This gpio-range is used to record which GPIOs correspond to which pins on which pin controllers. The GPIO to PIN mapping will be referenced by the pad wakeup function in GPIO-MXC driver. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-14arm64: dts: imx8qm-ss-lsio: add gpio-ranges propertyShenwei Wang
add gpio-ranges property for imx8qm soc. This gpio-range is used to record which GPIOs correspond to which pins on which pin controllers. The GPIO to PIN mapping will be referenced by the pad wakeup function in GPIO-MXC driver. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-14arm64: dts: imx8dxl-ss-lsio: add gpio-ranges propertyShenwei Wang
add gpio-ranges property for imx8dxl soc. This gpio-range is used to record which GPIOs correspond to which pins on which pin controllers. The GPIO to PIN mapping will be referenced by the pad wakeup function in GPIO-MXC driver. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-14arm64: dts: imx8dxl_evk: add lpspi0 supportFrank Li
Enable lpspi0 at imx8dxl_evk boards dts. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-14arm64: dts: imx8dxl: add lpspi supportFrank Li
Add lpspi0 lpspi1 lpspi2 lpspi3 node at common dma subsystem. Change irq number for 8dxl. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-14arm64: dts: imx8dxl_evk: add flexspi0 supportFrank Li
Enable flexspi0 at imx8dxl_evk boards dts. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-14arm64: dts: imx8dxl: add flexspi0 supportFrank Li
Add flexspi0 node at common lsio subsystem. Change flexspi0 irq number for imx8dxl. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-14arm64: dts: imx8dxl_evk: add adc0 supportFrank Li
Enable adc0 at imx8dxl_evk boards dts. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-14arm64: dts: imx8dxl: add adc0 supportFrank Li
Add adc0 and adc1 node at imx8 common dma subsystem. imx8dxl have only adc0. Change irq number for adc0. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-14ARM: dts: imx: e60k02: Add touchscreenAndreas Kemnade
Add the touchscreen now, since the driver is available. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-14ARM: dts: imx6qdl-sabre: Add mmc aliasesDetlev Casanova
If not specified, the mmc0 and mmc1 devices will be the devices mmc@2190000 and mmc@2194000, which are in disabled state on the iMX.6 Sabrelite devices. The actual SD card reader devices are the ones at mmc@2198000 and mmc@219c000. Set aliases to use the correct mmc devices order. Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11dt-bindings: arm64: dts: mediatek: add compatible for bananapi r3Frank Wunderlich
Add compatible for mt7986 based BananaPi R3 SBC. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221106085034.12582-9-linux@fw-web.de Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-11-11arm64: dts: mt7986: add i2c nodeFrank Wunderlich
Add i2c Node to mt7986 devicetree. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20221106085034.12582-7-linux@fw-web.de Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-11-11arm64: dts: mt7986: add crypto related device nodesSam Shih
This patch adds crypto engine support for MT7986. Signed-off-by: Vic Wu <vic.wu@mediatek.com> Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20221106085034.12582-5-linux@fw-web.de Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-11-11arm64: dts: mt7986: harmonize device node orderSam Shih
This arrange device tree nodes in alphabetical order. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221106085034.12582-2-linux@fw-web.de Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-11-11arm64: dts: mt8195: Add pcie and pcie phy nodesTinghan Shen
Add pcie and pcie phy nodes for mt8195. Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221103025656.8714-3-tinghan.shen@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2022-11-11arm64: dts: imx8m{m,n}-venice-gw7902: add gpio pins for new board revisionTim Harvey
Add gpio pins present on new board revision: * LTE modem support (imx8mm-gw7902 only) - lte_pwr# - lte_rst - lte_int * M2 power enable - m2_pwr_en * off-board 4.0V supply - vdd_4p0_en Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11ARM: dts: imx6ul/ull: suspend i.MX6UL watchdog in wait modeAndrej Picej
It was discovered that the watchdog triggers when the device is put into "Suspend-To-Idle"/"freeze" low-power mode. Setting WDW bit disables watchdog when the device is put into WAIT mode. Signed-off-by: Andrej Picej <andrej.picej@norik.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11dt-bindings: nvmem: snvs-lpgpr: Fix i.MX8M compatible stringsMarek Vasut
The compatible strings for "fsl,imx8m*-snvs-lpgpr" always contain the fallback "fsl,imx7d-snvs-lpgpr" compatible in DTs too, since the fallback compatible is what the driver matches on, this way: compatible = "fsl,imx8mm-snvs-lpgpr", "fsl,imx7d-snvs-lpgpr" The older "fsl,imx7d-snvs-lpgpr" and "fsl,imx6*-snvs-lpgpr" used only that single compatible string. Document both options in the binding document. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11arm64: dts: imx8mm: Remove watchdog always-enabled property from eDM SBCMarek Vasut
There is no such always-enabled property supported by gpio-watchdog driver or described in its bindings, remove it. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11arm64: dts: imx8mm: imx8mn: imx8mp: imx8mq: Replace opp-xM with opp-x000000Marek Vasut
Fix the following dtbs_check warning on all of i.MX8M variants: " opp-table: Unevaluated properties are not allowed ('opp-25M', 'opp-100M', 'opp-750M' were unexpected) " Using the following command: " $ sed -i '/opp-[0-9]\+M/ s@M {@000000 {@' arch/arm64/boot/dts/freescale/imx8m* " The Documentation/devicetree/bindings/opp/opp-v2-base.yaml expects the OPP subnode names to be full frequency listings in Hz without unit suffixes. Only the i.MX8M DTs are affected per "git grep 'opp-[0-9]\+M'", so fix them. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11arm64: dts: imx8mm-data-modul: Rename /watchdog-gpio to plain /watchdogMarek Vasut
The DT bindings checker is confused by the -gpio node suffix, drop it to fix the following warning: " imx8mm-data-modul-edm-sbc.dtb: /: watchdog-gpio: {'pinctrl-names': ['default'], 'pinctrl-0': [[104]], 'compatible': ['linux,wdt-gpio'], 'always-enabled': True, 'gpios': [[45, 8, 0]], 'hw_algo': ['level'], 'hw_margin_ms': [[1500]], 'status': ['disabled']} is not of type 'array' " Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11arm64: dts: verdin-imx8mp: dahlia: mark usb_2 permanently attachedMarcel Ziswiler
As both Dahlia and the Verdin Development Board have on-carrier permanently attached USB hubs mark Verdin USB_2 as such. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11arm64: dts: verdin-imx8mp: add gpio usb-b connectorMarcel Ziswiler
Add GPIO USB-B connector (gpio-usb-b-connector) functionality using Verdin USB_1_ID. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11arm64: dts: verdin-imx8mp: disable usb port power controlMarcel Ziswiler
Disable port power control on Verdin USB_1/2 as we use regular fixed-regulators with Verdin USB_1/2_EN as enable GPIOs. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11arm64: dts: verdin-imx8mp: add usb_1 over-current detectionMarcel Ziswiler
Add Verdin USB_1 over-current detection functionality via Verdin USB_1_OC# (SODIMM 157) being active-low and removing its previous gpio_hog3 mapping. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11arm64: dts: verdin-imx8mp: remove usb_2 over-current detection disablingMarcel Ziswiler
The disable-over-current property is only applicable for the ci-hdrc-usb2 and dwc2 drivers while the i.MX 8M Plus integrates dwc3 IP. Therefore remove this property which does not really serve any purpose here. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-11-11arm64: dts: verdin-imx8mp: improve pinctrl for vbus-suppliesMarcel Ziswiler
As we are using two fixed regulators for Verdin USB_1_EN (SODIMM 155) and Verdin USB_2_EN (SODIMM 185), those should be muxed as GPIOs rather than OTG_PWR. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 22:40:36 +0000