| Age | Commit message (Collapse) | Author |
|---|
|
Merge a cpufreq fix for 6.5-rc6.
This makes amd-pstate use device_attributes as expected by the CPU root
kobject.
* pm-cpufreq:
cpufreq: amd-pstate: fix global sysfs attribute type
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Add Manivannan Sadhasivam as DesignWare PCIe driver co-maintainer
(Krzysztof Wilczyński)
- Revert "PCI: dwc: Wait for link up only if link is started" to fix a
regression on Qualcomm platforms that don't reach interconnect sync
state if the slot is empty (Johan Hovold)
- Revert "PCI: mvebu: Mark driver as BROKEN" so people can use
pci-mvebu even though some others report problems (Bjorn Helgaas)
- Avoid a NULL pointer dereference when using acpiphp for root bus
hotplug to fix a regression added in v6.5-rc1 (Igor Mammedov)
* tag 'pci-v6.5-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus
Revert "PCI: mvebu: Mark driver as BROKEN"
Revert "PCI: dwc: Wait for link up only if link is started"
MAINTAINERS: Add Manivannan Sadhasivam as DesignWare PCIe driver maintainer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- Fixes for a pair of kexec_file_load() failures
- A fix to ensure the direct mapping is PMD-aligned
- A fix for CPU feature detection on SMP=n
- The MMIO ordering fences have been strengthened to ensure ordering
WRT delay()
- Fixes for a pair of -Wmissing-variable-declarations warnings
- A fix to avoid PUD mappings in vmap on sv39
- flush_cache_vmap() now flushes the TLB to avoid issues on systems
that cache invalid mappings
* tag 'riscv-for-linus-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Implement flush_cache_vmap()
riscv: Do not allow vmap pud mappings for 3-level page table
riscv: mm: fix 2 instances of -Wmissing-variable-declarations
riscv,mmio: Fix readX()-to-delay() ordering
riscv: Fix CPU feature detection with SMP disabled
riscv: Start of DRAM should at least be aligned on PMD size for the direct mapping
riscv/kexec: load initrd high in available memory
riscv/kexec: handle R_RISCV_CALL_PLT relocation type
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"A bugfix in the LWS code, which used different lock words than the
parisc lightweight spinlock checks. This inconsistency triggered false
positives when the lightweight spinlock checks checked the locks of
mutexes.
The other patches are trivial cleanups and most of them fix sparse
warnings.
Summary:
- Fix LWS code to use same lock words as for the parisc lightweight
spinlocks
- Use PTR_ERR_OR_ZERO() in pdt init code
- Fix lots of sparse warnings"
* tag 'parisc-for-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: perf: Make cpu_device variable static
parisc: ftrace: Add declaration for ftrace_function_trampoline()
parisc: boot: Nuke some sparse warnings in decompressor
parisc: processor: Include asm/smp.h for init_per_cpu()
parisc: unaligned: Include linux/sysctl.h for unaligned_enabled
parisc: Move proc_mckinley_root and proc_runway_root to sba_iommu
parisc: dma: Add prototype for pcxl_dma_start
parisc: parisc_ksyms: Include libgcc.h for libgcc prototypes
parisc: ucmpdi2: Fix no previous prototype for '__ucmpdi2' warning
parisc: firmware: Mark pdc_result buffers local
parisc: firmware: Fix sparse context imbalance warnings
parisc: signal: Fix sparse incorrect type in assignment warning
parisc: ioremap: Fix sparse warnings
parisc: fault: Use C99 arrary initializers
parisc: pdt: Use PTR_ERR_OR_ZERO() to simplify code
parisc: Fix lightweight spinlock checks to not break futexes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull cpuidle psci fixes from Ulf Hansson:
"A couple of cpuidle-psci fixes. Usually, this is managed by arm-soc
maintainers or Rafael, although due to a busy period I have stepped in
to help out:
- Fix the error path to prevent reverting from OSI back to PC mode"
* tag 'cpuidle-psci-v6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
cpuidle: psci: Move enabling OSI mode after power domains creation
cpuidle: dt_idle_genpd: Add helper function to remove genpd topology
|
|
Pull drm fixes from Dave Airlie:
"This week's fixes, as expected amdgpu is probably a little larger
since it skipped a week, but otherwise a few nouveau fixes, a couple
of bridge, rockchip and ivpu fixes.
amdgpu:
- S/G display workaround for platforms with >= 64G of memory
- S0i3 fix
- SMU 13.0.0 fixes
- Disable SMU 13.x OD features temporarily while the interface is
reworked to enable additional functionality
- Fix cursor gamma issues on DCN3+
- SMU 13.0.6 fixes
- Fix possible UAF in CS IOCTL
- Polaris display regression fix
- Only enable CP GFX shadowing on SR-IOV
amdkfd:
- Raven/Picasso KFD regression fix
bridge:
- it6505: runtime PM fix
- lt9611: revert Do not generate HFP/HBP/HSA and EOT packet
nouveau:
- enable global memory loads for helper invocations for userspace
driver
- dp 1.3 dpcd+ workaround fix
- remove unused function
- revert incorrect NULL check
accel/ivpu:
- Add set_pages_array_wc/uc for internal buffers
rockchip:
- Don't spam logs in atomic check"
* tag 'drm-fixes-2023-08-11' of git://anongit.freedesktop.org/drm/drm: (23 commits)
drm/shmem-helper: Reset vma->vm_ops before calling dma_buf_mmap()
drm/amdkfd: disable IOMMUv2 support for Raven
drm/amdkfd: disable IOMMUv2 support for KV/CZ
drm/amdkfd: ignore crat by default
drm/amdgpu/gfx11: only enable CP GFX shadowing on SR-IOV
drm/amd/display: Fix a regression on Polaris cards
drm/amdgpu: fix possible UAF in amdgpu_cs_pass1()
drm/amd/pm: Fix SMU v13.0.6 energy reporting
drm/amd/display: check attr flag before set cursor degamma on DCN3+
drm/amd/pm: disable the SMU13 OD feature support temporarily
drm/amd/pm: correct the pcie width for smu 13.0.0
drm/amd/display: Don't show stack trace for missing eDP
drm/amdgpu: Match against exact bootloader status
drm/amd/pm: skip the RLC stop when S0i3 suspend for SMU v13.0.4/11
drm/amd: Disable S/G for APUs when 64GB or more host memory
drm/rockchip: Don't spam logs in atomic check
accel/ivpu: Add set_pages_array_wc/uc for internal buffers
drm/nouveau/disp: Revert a NULL check inside nouveau_connector_get_modes
Revert "drm/bridge: lt9611: Do not generate HFP/HBP/HSA and EOT packet"
drm/nouveau: remove unused tu102_gr_load() function
...
|
|
Now nvme_ns_chr_uring_cmd_iopoll() has switched to request based io
polling, and the associated NS is guaranteed to be live in case of
io polling, so request is guaranteed to be valid because blk-mq uses
pre-allocated request pool.
Remove the rcu read lock in nvme_ns_chr_uring_cmd_iopoll(), which
isn't needed any more after switching to request based io polling.
Fix "BUG: sleeping function called from invalid context" because
set_page_dirty_lock() from blk_rq_unmap_user() may sleep.
Fixes: 585079b6e425 ("nvme: wire up async polling for io passthrough commands")
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Cc: Kanchan Joshi <joshi.k@samsung.com>
Cc: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Link: https://lore.kernel.org/r/20230809020440.174682-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.5-2023-08-09:
amdgpu:
- S/G display workaround for platforms with >= 64G of memory
- S0i3 fix
- SMU 13.0.0 fixes
- Disable SMU 13.x OD features temporarily while the interface is reworked
to enable additional functionality
- Fix cursor gamma issues on DCN3+
- SMU 13.0.6 fixes
- Fix possible UAF in CS IOCTL
- Polaris display regression fix
- Only enable CP GFX shadowing on SR-IOV
amdkfd:
- Raven/Picasso KFD regression fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809182827.8135-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Multiple fixes for nouveau around memory safety and DisplayPort, one fix
to reduce the log level of rockchip, a power state fix for the it6505
bridge, a timing fix for the lt9611 bridge, a cache maintenance fix for
ivpu and one to reset vma->vm_ops on mmap for shmem-helper.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fwed6gzdtkse5ocrgd37elhyw7qirfptsvfp5mqqverdzifhxj@4da3vesxcqp2
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Make sparse happy by adding declaration for
ftrace_function_trampoline().
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fix sparse warning that init_per_cpu() isn't declared.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fix sparse warning that unaligned_enabled wasn't declared.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Clean up the procfs root entries for gsc, runway, and mckinley busses.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bpf.
Still trending up in size but the good news is that the "current"
regressions are resolved, AFAIK.
We're getting weirdly many fixes for Wake-on-LAN and suspend/resume
handling on embedded this week (most not merged yet), not sure why.
But those are all for older bugs.
Current release - regressions:
- tls: set MSG_SPLICE_PAGES consistently when handing encrypted data
over to TCP
Current release - new code bugs:
- eth: mlx5: correct IDs on VFs internal to the device (IPU)
Previous releases - regressions:
- phy: at803x: fix WoL support / reporting on AR8032
- bonding: fix incorrect deletion of ETH_P_8021AD protocol VID from
slaves, leading to BUG_ON()
- tun: prevent tun_build_skb() from exceeding the packet size limit
- wifi: rtw89: fix 8852AE disconnection caused by RX full flags
- eth/PCI: enetc: fix probing after 6fffbc7ae137 ("PCI: Honor
firmware's device disabled status"), keep PCI devices around even
if they are disabled / not going to be probed to be able to apply
quirks on them
- eth: prestera: fix handling IPv4 routes with nexthop IDs
Previous releases - always broken:
- netfilter: re-work garbage collection to avoid races between
user-facing API and timeouts
- tunnels: fix generating ipv4 PMTU error on non-linear skbs
- nexthop: fix infinite nexthop bucket dump when using maximum
nexthop ID
- wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems()
Misc:
- unix: use consistent error code in SO_PEERPIDFD
- ipv6: adjust ndisc_is_useropt() to include PREFIX_INFO, in prep for
upcoming IETF RFC"
* tag 'net-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
net: hns3: fix strscpy causing content truncation issue
net: tls: set MSG_SPLICE_PAGES consistently
ibmvnic: Ensure login failure recovery is safe from other resets
ibmvnic: Do partial reset on login failure
ibmvnic: Handle DMA unmapping of login buffs in release functions
ibmvnic: Unmap DMA login rsp buffer on send login fail
ibmvnic: Enforce stronger sanity checks on login response
net: mana: Fix MANA VF unload when hardware is unresponsive
netfilter: nf_tables: remove busy mark and gc batch API
netfilter: nft_set_hash: mark set element as dead when deleting from packet path
netfilter: nf_tables: adapt set backend to use GC transaction API
netfilter: nf_tables: GC transaction API to avoid race with control plane
selftests/bpf: Add sockmap test for redirecting partial skb data
selftests/bpf: fix a CI failure caused by vsock sockmap test
bpf, sockmap: Fix bug that strp_done cannot be called
bpf, sockmap: Fix map type error in sock_map_del_link
xsk: fix refcount underflow in error path
ipv6: adjust ndisc_is_useropt() to also return true for PIO
selftests: forwarding: bridge_mdb: Make test more robust
selftests: forwarding: bridge_mdb_max: Fix failing test with old libnet
...
|
|
Fix the missing dpi_tbl_lock mutex initialization.
Fixes: 0ac20faf5d83 ("RDMA/bnxt_re: Reorg the bar mapping")
Link: https://lore.kernel.org/r/1691642677-21369-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
During bnxt_re_dev_init(), when bnxt_re_setup_chip_ctx() fails unregister
with L2 first before bailing out probe.
Fixes: ae8637e13185 ("RDMA/bnxt_re: Add chip context to identify 57500 series")
Link: https://lore.kernel.org/r/1691642677-21369-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
ib_dealloc_device() should be called only after device cleanup. Fix the
dealloc sequence.
Fixes: 6d758147c7b8 ("RDMA/bnxt_re: Use auxiliary driver interface")
Link: https://lore.kernel.org/r/1691642677-21369-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
hns3_dbg_fill_content()/hclge_dbg_fill_content() is aim to integrate some
items to a string for content, and we add '\n' and '\0' in the last
two bytes of content.
strscpy() will add '\0' in the last byte of destination buffer(one of
items), it result in finishing content print ahead of schedule and some
dump content truncation.
One Error log shows as below:
cat mac_list/uc
UC MAC_LIST:
Expected:
UC MAC_LIST:
FUNC_ID MAC_ADDR STATE
pf 00:2b:19:05:03:00 ACTIVE
The destination buffer is length-bounded and not required to be
NUL-terminated, so just change strscpy() to memcpy() to fix it.
Fixes: 1cf3d5567f27 ("net: hns3: fix strncpy() not using dest-buf length as length issue")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20230809020902.1941471-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We used to change the flags for the last segment, because
non-last segments had the MSG_SENDPAGE_NOTLAST flag set.
That flag is no longer a thing so remove the setting.
Since flags most likely don't have MSG_SPLICE_PAGES set
this avoids passing parts of the sg as splice and parts
as non-splice. Before commit under Fixes we'd have called
tcp_sendpage() which would add the MSG_SPLICE_PAGES.
Why this leads to trouble remains unclear but Tariq
reports hitting the WARN_ON(!sendpage_ok()) due to
page refcount of 0.
Fixes: e117dcfd646e ("tls: Inline do_tcp_sendpages()")
Reported-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/all/4c49176f-147a-4283-f1b1-32aac7b4b996@gmail.com/
Tested-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20230808180917.1243540-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- HAS_IOMEM fixes for fsl edma and intel idma
- return-value fix, interrupt vector setting and typo fix for xilinx
xdma
- email updates for codeaurora email domain move
- correct pause status for pl330 driver
- idxd clear flag on disable fix
- function documentation fix for owl dma
- potential un-allocated memory fix for mcf driver
* tag 'dmaengine-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: xilinx: xdma: Fix typo
dmaengine: xilinx: xdma: Fix interrupt vector setting
dmaengine: owl-dma: Modify mismatched function name
dmaengine: idxd: Clear PRS disable flag when disabling IDXD device
dmaengine: pl330: Return DMA_PAUSED when transaction is paused
dmaengine: qcom_hidma: Update codeaurora email domain
dmaengine: mcf-edma: Fix a potential un-allocated memory access
dmaengine: xilinx: xdma: Fix Judgment of the return value
idmaengine: make FSL_EDMA and INTEL_IDMA64 depends on HAS_IOMEM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The existing attempt to resolve races between control plane and GC work
is error prone, as reported by Bien Pham <phamnnb@sea.com>, some places
forgot to call nft_set_elem_mark_busy(), leading to double-deactivation
of elements.
This series contains the following patches:
1) Do not skip expired elements during walk otherwise elements might
never decrement the reference counter on data, leading to memleak.
2) Add a GC transaction API to replace the former attempt to deal with
races between control plane and GC. GC worker sets on NFT_SET_ELEM_DEAD_BIT
on elements and it creates a GC transaction to remove the expired
elements, GC transaction could abort in case of interference with
control plane and retried later (GC async). Set backends such as
rbtree and pipapo also perform GC from control plane (GC sync), in
such case, element deactivation and removal is safe because mutex
is held then collected elements are released via call_rcu().
3) Adapt existing set backends to use the GC transaction API.
4) Update rhash set backend to set on _DEAD bit to report deleted
elements from datapath for GC.
5) Remove old GC batch API and the NFT_SET_ELEM_BUSY_BIT.
* tag 'nf-23-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: remove busy mark and gc batch API
netfilter: nft_set_hash: mark set element as dead when deleting from packet path
netfilter: nf_tables: adapt set backend to use GC transaction API
netfilter: nf_tables: GC transaction API to avoid race with control plane
netfilter: nf_tables: don't skip expired elements during walk
====================
Link: https://lore.kernel.org/r/20230810070830.24064-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Martin KaFai Lau says:
====================
pull-request: bpf 2023-08-09
We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 6 files changed, 102 insertions(+), 8 deletions(-).
The main changes are:
1) A bpf sockmap memleak fix and a fix in accessing the programs of
a sockmap under the incorrect map type from Xu Kuohai.
2) A refcount underflow fix in xsk from Magnus Karlsson.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add sockmap test for redirecting partial skb data
selftests/bpf: fix a CI failure caused by vsock sockmap test
bpf, sockmap: Fix bug that strp_done cannot be called
bpf, sockmap: Fix map type error in sock_map_del_link
xsk: fix refcount underflow in error path
====================
Link: https://lore.kernel.org/r/20230810055303.120917-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a login request fails, the recovery process should be protected
against parallel resets. It is a known issue that freeing and
registering CRQ's in quick succession can result in a failover CRQ from
the VIOS. Processing a failover during login recovery is dangerous for
two reasons:
1. This will result in two parallel initialization processes, this can
cause serious issues during login.
2. It is possible that the failover CRQ is received but never executed.
We get notified of a pending failover through a transport event CRQ.
The reset is not performed until a INIT CRQ request is received.
Previously, if CRQ init fails during login recovery, then the ibmvnic
irq is freed and the login process returned error. If failover_pending
is true (a transport event was received), then the ibmvnic device
would never be able to process the reset since it cannot receive the
CRQ_INIT request due to the irq being freed. This leaved the device
in a inoperable state.
Therefore, the login failure recovery process must be hardened against
these possible issues. Possible failovers (due to quick CRQ free and
init) must be avoided and any issues during re-initialization should be
dealt with instead of being propagated up the stack. This logic is
similar to that of ibmvnic_probe().
Fixes: dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-5-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Perform a partial reset before sending a login request if any of the
following are true:
1. If a previous request times out. This can be dangerous because the
VIOS could still receive the old login request at any point after
the timeout. Therefore, it is best to re-register the CRQ's and
sub-CRQ's before retrying.
2. If the previous request returns an error that is not described in
PAPR. PAPR provides procedures if the login returns with partial
success or aborted return codes (section L.5.1) but other values
do not have a defined procedure. Previously, these conditions
just returned error from the login function rather than trying
to resolve the issue.
This can cause further issues since most callers of the login
function are not prepared to handle an error when logging in. This
improper cleanup can lead to the device being permanently DOWN'd.
For example, if the VIOS believes that the device is already logged
in then it will return INVALID_STATE (-7). If we never re-register
CRQ's then it will always think that the device is already logged
in. This leaves the device inoperable.
The partial reset involves freeing the sub-CRQs, freeing the CRQ then
registering and initializing a new CRQ and sub-CRQs. This essentially
restarts all communication with VIOS to allow for a fresh login attempt
that will be unhindered by any previous failed attempts.
Fixes: dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-4-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than leaving the DMA unmapping of the login buffers to the
login response handler, move this work into the login release functions.
Previously, these functions were only used for freeing the allocated
buffers. This could lead to issues if there are more than one
outstanding login buffer requests, which is possible if a login request
times out.
If a login request times out, then there is another call to send login.
The send login function makes a call to the login buffer release
function. In the past, this freed the buffers but did not DMA unmap.
Therefore, the VIOS could still write to the old login (now freed)
buffer. It is for this reason that it is a good idea to leave the DMA
unmap call to the login buffers release function.
Since the login buffer release functions now handle DMA unmapping,
remove the duplicate DMA unmapping in handle_login_rsp().
Fixes: dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-3-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the LOGIN CRQ fails to send then we must DMA unmap the response
buffer. Previously, if the CRQ failed then the memory was freed without
DMA unmapping.
Fixes: c98d9cc4170d ("ibmvnic: send_login should check for crq errors")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-2-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure that all offsets in a login response buffer are within the size
of the allocated response buffer. Any offsets or lengths that surpass
the allocation are likely the result of an incomplete response buffer.
In these cases, a full reset is necessary.
When attempting to login, the ibmvnic device will allocate a response
buffer and pass a reference to the VIOS. The VIOS will then send the
ibmvnic device a LOGIN_RSP CRQ to signal that the buffer has been filled
with data. If the ibmvnic device does not get a response in 20 seconds,
the old buffer is freed and a new login request is sent. With 2
outstanding requests, any LOGIN_RSP CRQ's could be for the older
login request. If this is the case then the login response buffer (which
is for the newer login request) could be incomplete and contain invalid
data. Therefore, we must enforce strict sanity checks on the response
buffer values.
Testing has shown that the `off_rxadd_buff_size` value is filled in last
by the VIOS and will be the smoking gun for these circumstances.
Until VIOS can implement a mechanism for tracking outstanding response
buffers and a method for mapping a LOGIN_RSP CRQ to a particular login
response buffer, the best ibmvnic can do in this situation is perform a
full reset.
Fixes: dff515a3e71d ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When unloading the MANA driver, mana_dealloc_queues() waits for the MANA
hardware to complete any inflight packets and set the pending send count
to zero. But if the hardware has failed, mana_dealloc_queues()
could wait forever.
Fix this by adding a timeout to the wait. Set the timeout to 120 seconds,
which is a somewhat arbitrary value that is more than long enough for
functional hardware to complete any sends.
Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Link: https://lore.kernel.org/r/1691576525-24271-1-git-send-email-schakrabarti@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
./sound/soc/sof/intel/lnl.c: hda.h is included more than once.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230810005555.4610-1-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The declaration got placed in the .c file of the caller, but that
causes a warning for the definition:
arch/x86/kernel/cpu/bugs.c:682:6: error: no previous prototype for 'gds_ucode_mitigated' [-Werror=missing-prototypes]
Move it to a header where both sides can observe it instead.
Fixes: 81ac7e5d74174 ("KVM: Add GDS_NO support to KVM")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/all/20230809130530.1913368-2-arnd%40kernel.org
|
|
The newly added function has two definitions but no prototypes:
drivers/base/cpu.c:605:16: error: no previous prototype for 'cpu_show_gds' [-Werror=missing-prototypes]
Add a declaration next to the other ones for this file to avoid the
warning.
Fixes: 8974eb588283b ("x86/speculation: Add Gather Data Sampling mitigation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/all/20230809130530.1913368-1-arnd%40kernel.org
|
|
The RISC-V kernel needs a sfence.vma after a page table modification: we
used to rely on the vmalloc fault handling to emit an sfence.vma, but
commit 7d3332be011e ("riscv: mm: Pre-allocate PGD entries for
vmalloc/modules area") got rid of this path for 64-bit kernels, so now we
need to explicitly emit a sfence.vma in flush_cache_vmap().
Note that we don't need to implement flush_cache_vunmap() as the generic
code should emit a flush tlb after unmapping a vmalloc region.
Fixes: 7d3332be011e ("riscv: mm: Pre-allocate PGD entries for vmalloc/modules area")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230725132246.817726-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The vmalloc_fault() path was removed and to avoid syncing the vmalloc PGD
mappings, they are now preallocated. But if the kernel can use a PUD
mapping (which in sv39 is actually a PGD mapping) for large vmalloc
allocation, it will free the current unused preallocated PGD mapping and
install a new leaf one. Since there is no sync anymore, some page tables
lack this new mapping and that triggers a panic.
So only allow PUD mappings for sv48 and sv57.
Fixes: 7d3332be011e ("riscv: mm: Pre-allocate PGD entries for vmalloc/modules area")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230808130709.1502614-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This fixes a sparse warning which suggest to make those static.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Tell sparse about correct context for pdc_cpu_rendezvous_*lock()
functions.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fix sparse warning:
incorrect type in assignment (different base types)
expected unsigned long [usertype] addr
got void *addr
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Sparse wants C99 array initializers.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Return PTR_ERR_OR_ZERO() instead of return 0 or PTR_ERR() to
simplify code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The lightweight spinlock checks verify that a spinlock has either value
0 (spinlock locked) and that not any other bits than in
__ARCH_SPIN_LOCK_UNLOCKED_VAL is set.
This breaks the current LWS code, which writes the address of the lock
into the lock word to unlock it, which was an optimization to save one
assembler instruction.
Fix it by making spinlock_types.h accessible for asm code, change the
LWS spinlock-unlocking code to write __ARCH_SPIN_LOCK_UNLOCKED_VAL into
the lock word, and add some missing lightweight spinlock checks to the
LWS path. Finally, make the spinlock checks dependend on DEBUG_KERNEL.
Noticed-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v6.4+
Fixes: 15e64ef6520e ("parisc: Add lightweight spinlock checks")
|
|
We set cache_block_group_error if btrfs_cache_block_group() returns an
error, this is because we could end up not finding space to allocate and
mistakenly return -ENOSPC, and which could then abort the transaction
with the incorrect errno, and in the case of ENOSPC result in a
WARN_ON() that will trip up tests like generic/475.
However there's the case where multiple threads can be racing, one
thread gets the proper error, and the other thread doesn't actually call
btrfs_cache_block_group(), it instead sees ->cached ==
BTRFS_CACHE_ERROR. Again the result is the same, we fail to allocate
our space and return -ENOSPC. Instead we need to set
cache_block_group_error to -EIO in this case to make sure that if we do
not make our allocation we get the appropriate error returned back to
the caller.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Syzbot reported a crash that an ASSERT() got triggered inside
prepare_to_merge().
That ASSERT() makes sure the reloc tree is properly pointed back by its
subvolume tree.
[CAUSE]
After more debugging output, it turns out we had an invalid reloc tree:
BTRFS error (device loop1): reloc tree mismatch, root 8 has no reloc root, expect reloc root key (-8, 132, 8) gen 17
Note the above root key is (TREE_RELOC_OBJECTID, ROOT_ITEM,
QUOTA_TREE_OBJECTID), meaning it's a reloc tree for quota tree.
But reloc trees can only exist for subvolumes, as for non-subvolume
trees, we just COW the involved tree block, no need to create a reloc
tree since those tree blocks won't be shared with other trees.
Only subvolumes tree can share tree blocks with other trees (thus they
have BTRFS_ROOT_SHAREABLE flag).
Thus this new debug output proves my previous assumption that corrupted
on-disk data can trigger that ASSERT().
[FIX]
Besides the dedicated fix and the graceful exit, also let tree-checker to
check such root keys, to make sure reloc trees can only exist for subvolumes.
CC: stable@vger.kernel.org # 5.15+
Reported-by: syzbot+ae97a827ae1c3336bbb4@syzkaller.appspotmail.com
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Syzbot reported a crash that an ASSERT() got triggered inside
prepare_to_merge().
[CAUSE]
The root cause of the triggered ASSERT() is we can have a race between
quota tree creation and relocation.
This leads us to create a duplicated quota tree in the
btrfs_read_fs_root() path, and since it's treated as fs tree, it would
have ROOT_SHAREABLE flag, causing us to create a reloc tree for it.
The bug itself is fixed by a dedicated patch for it, but this already
taught us the ASSERT() is not something straightforward for
developers.
[ENHANCEMENT]
Instead of using an ASSERT(), let's handle it gracefully and output
extra info about the mismatch reloc roots to help debug.
Also with the above ASSERT() removed, we can trigger ASSERT(0)s inside
merge_reloc_roots() later.
Also replace those ASSERT(0)s with WARN_ON()s.
CC: stable@vger.kernel.org # 5.15+
Reported-by: syzbot+ae97a827ae1c3336bbb4@syzkaller.appspotmail.com
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Syzbot reported a weird ASSERT() triggered inside prepare_to_merge().
assertion failed: root->reloc_root == reloc_root, in fs/btrfs/relocation.c:1919
------------[ cut here ]------------
kernel BUG at fs/btrfs/relocation.c:1919!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 9904 Comm: syz-executor.3 Not tainted
6.4.0-syzkaller-08881-g533925cb7604 #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 05/27/2023
RIP: 0010:prepare_to_merge+0xbb2/0xc40 fs/btrfs/relocation.c:1919
Code: fe e9 f5 (...)
RSP: 0018:ffffc9000325f760 EFLAGS: 00010246
RAX: 000000000000004f RBX: ffff888075644030 RCX: 1481ccc522da5800
RDX: ffffc90005c09000 RSI: 00000000000364ca RDI: 00000000000364cb
RBP: ffffc9000325f870 R08: ffffffff816f33ac R09: 1ffff9200064bea0
R10: dffffc0000000000 R11: fffff5200064bea1 R12: ffff888075644000
R13: ffff88803b166000 R14: ffff88803b166560 R15: ffff88803b166558
FS: 00007f4e305fd700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056080679c000 CR3: 00000000193ad000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
relocate_block_group+0xa5d/0xcd0 fs/btrfs/relocation.c:3749
btrfs_relocate_block_group+0x7ab/0xd70 fs/btrfs/relocation.c:4087
btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3283
__btrfs_balance+0x1b06/0x2690 fs/btrfs/volumes.c:4018
btrfs_balance+0xbdb/0x1120 fs/btrfs/volumes.c:4402
btrfs_ioctl_balance+0x496/0x7c0 fs/btrfs/ioctl.c:3604
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xf8/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f4e2f88c389
[CAUSE]
With extra debugging, the offending reloc_root is for quota tree (rootid 8).
Normally we should not use the reloc tree for quota root at all, as reloc
trees are only for subvolume trees.
But there is a race between quota enabling and relocation, this happens
after commit 85724171b302 ("btrfs: fix the btrfs_get_global_root return value").
Before that commit, for quota and free space tree, we exit immediately
if we cannot grab it from fs_info.
But now we would try to read it from disk, just as if they are fs trees,
this sets ROOT_SHAREABLE flags in such race:
Thread A | Thread B
---------------------------------+------------------------------
btrfs_quota_enable() |
| | btrfs_get_root_ref()
| | |- btrfs_get_global_root()
| | | Returned NULL
| | |- btrfs_lookup_fs_root()
| | | Returned NULL
|- btrfs_create_tree() | |
| Now quota root item is | |
| inserted | |- btrfs_read_tree_root()
| | | Got the newly inserted quota root
| | |- btrfs_init_fs_root()
| | | Set ROOT_SHAREABLE flag
[FIX]
Get back to the old behavior by returning PTR_ERR(-ENOENT) if the target
objectid is not a subvolume tree or data reloc tree.
Reported-and-tested-by: syzbot+ae97a827ae1c3336bbb4@syzkaller.appspotmail.com
Fixes: 85724171b302 ("btrfs: fix the btrfs_get_global_root return value")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When the call to btrfs_reloc_clone_csums in cow_file_range returns an
error, we jump to the out_unlock label with the extent_reserved variable
set to false. The cleanup at the label will then call
extent_clear_unlock_delalloc on the range from start to end. But we've
already added cur_alloc_size to start before the jump, so there might no
range be left from the newly incremented start to end. Move the check for
'start < end' so that it is reached by also for the !extent_reserved case.
CC: stable@vger.kernel.org # 6.1+
Fixes: a315e68f6e8b ("Btrfs: fix invalid attempt to free reserved space on failure to cow range")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
