summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-18iwlwifi: mvm: Fix resource allocation for P2P DeviceIlan Peer
The time event data structures are required also for P2P Device interface. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18iwlwifi: mvm: Set the scan type according to the vif typeIlan Peer
The FW can differentiate between scans, according to the interface type on which the scan was issues. Supply the interfaces type information to the FW. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18iwlwifi: mvm: fix time event command handling raceJohannes Berg
Occasionally, we would run into this warning: iwlwifi 0000:02:00.0: U iwl_mvm_protect_session extend 0x2601: only 200 ms left iwlwifi 0000:02:00.0: U iwl_mvm_remove_time_event Removing TE 0x2601 iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command TIME_EVENT_CMD (#29), seq: 0x0925, 60 bytes at 37[5]:9 iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command TIME_EVENT_CMD iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command TIME_EVENT_CMD iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command TIME_EVENT_CMD (#29), seq: 0x0926, 60 bytes at 38[6]:9 iwlwifi 0000:02:00.0: U iwl_mvm_time_event_response TIME_EVENT_CMD response - UID = 0x2601 iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command TIME_EVENT_CMD iwlwifi 0000:02:00.0: U iwl_mvm_rx_time_event_notif Time event notification - UID = 0x2701 action 1 wlan0: associate with 00:0a:b8:55:a8:30 (try 2/3) ------------[ cut here ]------------ WARNING: at drivers/net/wireless/iwlwifi/mvm/time-event.c:269 iwl_mvm_time_event_send_add+0x163/0x1a0 [iwlmvm]() Modules linked in: [...] Call Trace: [<c1046e42>] warn_slowpath_common+0x72/0xa0 [<c1046e92>] warn_slowpath_null+0x22/0x30 [<f8cad913>] iwl_mvm_time_event_send_add+0x163/0x1a0 [iwlmvm] [<f8cadead>] iwl_mvm_protect_session+0xcd/0x1c0 [iwlmvm] [<f8ca2087>] iwl_mvm_mac_mgd_prepare_tx+0x67/0xa0 [iwlmvm] [<f882a130>] ieee80211_sta_work+0x8f0/0x1070 [mac80211] The reason is a problem with asynchronous vs. synchronous commands, what happens here is the following: * TE 0x2601 is removed, the TIME_EVENT_CMD for that is async * a new TE (will be 0x2701) is created, the TIME_EVENT_CMD for that is sync and also uses a notification wait for the response (to avoid another race condition) * the response for the TE 0x2601 removal comes from the firmware, and is handled by the notification wait handler that's really waiting for the second response, but can't tell the difference, we therefore see the message "TIME_EVENT_CMD response - UID = 0x2601" instead of "TIME_EVENT_CMD response - UID = 0x2701". Fix this issue by making the TE removal synchronous as well, this means that we wait for the response to that command first, before there's any chance of sending a new one. Also, to detect such issues more easily in the future, add a warning to the notification handler that detects them. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18iwlwifi: mvm: add debug statement to time event addJohannes Berg
This is helpful for debugging the time event warning, but also in general to see what's going on. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18iwlwifi: mvm: fix GO powersave client manipulationJohannes Berg
All station commands must include a valid MAC ID, the ID 0 is randomly valid in some cases, but we must set the ID properly. Do that by passing the right station and using its mac_id_n_color. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18iwlwifi: mvm: program DTIM timings properlyJohannes Berg
For the firmware to know when DTIM beacons arrive we have to program the DTIM time in TSF and system time in the MAC context. Since mac80211 now tracks the different times (on demand), this becomes easy. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18iwlwifi: mvm: fix merge errorJohannes Berg
The iwlwifi-next tree removed IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC while the mac80211-next tree removed Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18Merge remote-tracking branch 'wireless-next/master' into iwlwifi-nextJohannes Berg
2013-02-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/dvm/tx.c drivers/net/wireless/ti/wlcore/sdio.c drivers/net/wireless/ti/wlcore/spi.c
2013-02-18MAINTAINERS: Jiri Pirko email changeJiri Pirko
Change email for team driver maintainership. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18tg3: Use different macros for pci_chip_rev_id accessesJoe Perches
Upper case macros for various chip attributes are slightly difficult to read and are a bit out of characterto the other tg3_<foo> attribute functions. Convert: GET_ASIC_REV(tp->pci_chip_rev_id) -> tg3_asic_rev(tp) GET_CHIP_REV(tp->pci_chip_rev_id) -> tg3_chip_rev(tp) Remove: GET_METAL_REV(tp->pci_chip_rev_id) -> tg3_metal_rev(tp) (unused) Add: tg3_chip_rev_id(tp) for tp->pci_chip_rev_id so access styles are similar to tg3_asic_rev and tg3_chip_rev. These macros are not converted to static inline functions because gcc (tested with 4.7.2) is currently unable to optimize the object code it produces the same way and code is otherwise larger. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18tg3: Remove define and single use of GET_CHIP_REV_IDJoe Perches
It's the same value as tp->pci_chip_rev_id so use that instead. This makes all CHIPREV_ID_<foo> tests the same. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18bgmac: fix unaligned accesses to network headersHauke Mehrtens
Without this patch I get many unaligned access warnings per packet, this patches fixes them all. This should improve performance on some systems like mips. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18ip: fix warning in xfrm4_mode_tunnel_inputstephen hemminger
Same problem as IPv6 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18ipv6: fix warning in xfrm6_mode_tunnel_inputstephen hemminger
Should not use assignment in conditional: warning: suggest parentheses around assignment used as truth value [-Wparentheses] Problem introduced by: commit 14bbd6a565e1bcdc240d44687edb93f721cfdf99 Author: Pravin B Shelar <pshelar@nicira.com> Date: Thu Feb 14 09:44:49 2013 +0000 net: Add skb_unclone() helper function. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== This series contains updates to e1000, e1000e, igb, igbvf and ixgbe. The e1000, e1000e, igb and igbvf are single patch changes and the remaining 11 patches are all against ixgbe. The e1000 patch is a comment cleanup to align e1000 with the code commenting style for /drivers/net. It also contains a few other white space cleanups (i.e. fix lines over 80 char, remove unnecessary blank lines and fix the use of tabs/spaces). The e1000e patch from Koki (Fujitsu) adds a warning when link speed is downgraded due to SmartSpeed. The igb patch from Stefan (Red Hat) increases the timeout in the ethtool offline self-test because some i350 adapters would sometimes fail the self-test because link auto negotiation may take longer than the current 4 second timeout. The igbvf patch from Alex is meant to address several race issues that become possible because next_to_watch could possibly be set to a value that shows that the descriptor is done when it is not. In order to correct that we instead make next_to_watch a pointer that is set to NULL during cleanup, and set to the eop_desc after the descriptor rings have been written. The remaining patches for ixgbe are a mix of fixes and added support as well as some cleanup. Most notably is the added support for displaying the number of Tx/Rx channels via ethtool by Alex. Also Aurélien adds the ability for reading data from SFP+ modules over i2c for diagnostic monitoring. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18net: fix a compile error when SOCK_REFCNT_DEBUG is enabledYing Xue
When SOCK_REFCNT_DEBUG is enabled, below build error is met: kernel/sysctl_binary.o: In function `sk_refcnt_debug_release': include/net/sock.h:1025: multiple definition of `sk_refcnt_debug_release' kernel/sysctl.o:include/net/sock.h:1025: first defined here kernel/audit.o: In function `sk_refcnt_debug_release': include/net/sock.h:1025: multiple definition of `sk_refcnt_debug_release' kernel/sysctl.o:include/net/sock.h:1025: first defined here make[1]: *** [kernel/built-in.o] Error 1 make: *** [kernel] Error 2 So we decide to make sk_refcnt_debug_release static to eliminate the error. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18net: move ioctl functions into a separated fileCong Wang
They well deserve a separated unit. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18net: ehea module param description fixDave Young
In ehea.h the minimal entries is 2^7 - 1: #define EHEA_MIN_ENTRIES_QP 127 Thus change the module param description accordinglly Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18cfg80211: fix station change if TDLS isn't supportedJohannes Berg
Larry noticed (and bisected) that commit df881293c6ba9a12868491a717b25 "cfg80211: Pass TDLS peer's QoS/HT/VHT information during set_station" broke secure connections. This is is the case only for drivers that don't support TDLS, where any kind of change, even just the change of authorized flag that is required for normal operation, was rejected now. To fix this, remove the checks. I have some patches that will add proper verification for all the different cases later. Cc: Jouni Malinen <j@w1.fi> Bisected-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18ipv6: optimize inet6_hash_frag()Eric Dumazet
Use ipv6_addr_hash() and a single jhash invocation. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18Merge branch 'tipc_net-next' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Paul Gortmaker says: ==================== Two relatively small cleanup patches here, plus a reimplementation of the patch Neil had questions about[1] in the last development cycle. Tested on today's net-next, between 32 and 64 bit x86 machines using the server/client in tipc-utils, as usual. [1] http://patchwork.ozlabs.org/patch/204507/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18mac80211: don't spam mesh probe response messagesThomas Pedersen
If mesh plink debugging is enabled, this gets annoying in a crowded environment, fast. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18mac80211: stringify mesh peering eventsThomas Pedersen
Convert mesh peering events into strings and make the debug output a little easier to read. Also stop printing the llid and plid since these don't change across peering states and are random numbers anyway so they just amount to noise. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18mac80211: clean up mesh HT operationThomas Pedersen
ieee80211_ht_cap_ie_to_sta_ht_cap() will clean up the ht_supported flag and station bandwidth field for us if the peer beacon doesn't have an HT capability element (is operating as non-HT). Also, we don't really need a special station ch_width member to track the station operating mode any more so use sta.bandwidth instead. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18mac80211: fix harmless station flush warningJohannes Berg
If an interface is set down while authenticating or associating, there's a station entry that will be removed by the flushing in do_stop() and that will cause a warning. It's otherwise harmless, but avoid the warning by calling ieee80211_mgd_stop() first. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-18cfg80211: add correct docbook entriesJohannes Berg
Update the 802.11 book to list the correct data structures. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-15ixgbe: Update DESC_NEEDED define to adjust for changes to MAX_SKB_FRAGSAlexander Duyck
Recent changes have made it so that MAX_SKB_FRAGS is now never less than 16. As a result we were seeing issues on systems with 64K pages as it would cause DESC_NEEDED to increase to 68, and we would need over 136 descriptors free before clean_tx_irq would wake the queue. This patch makes it so that DESC_NEEDED is always MAX_SKB_FRAGS + 4. This should prevent any possible deadlocks on the systems with 64K pages as we will now only require 42 descriptors to wake. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: fix Tx timeouts with BQLEmil Tantilov
This patch makes sure that TXDCTL.WTHRESH is set to 1 when BQL is enabled and EITR is set to more than 100k interrupts per second to avoid Tx timeouts. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: implement SFF diagnostic monitoring via ethtoolAurélien Guillaume
This patch adds support for reading data from SFP+ modules over i2c. Signed-off-by: Aurélien Guillaume <footplus@gmail.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: cleanup error checking in ixgbe_identify_sfp_module_generic()Emil Tantilov
This patch replaces instances where a return code from i2c operations were checked against a list of error codes with a much simpler if ( status != 0 ) check. Some whitespace cleanups included. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: fix possible data corruption in read_i2c_byteEmil Tantilov
This patch makes sure that the SW lock is released after all i2c operations complete in the retry code path. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: Add support for set_channels ethtool operationAlexander Duyck
This change adds support for the ethtool set_channels operation. Since the ixgbe driver has to support DCB as well as the other modes the assumption I made here is that the number of channels in DCB modes refers to the number of queues per traffic class, not the number of queues total. CC: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: Add support for displaying the number of Tx/Rx channelsAlexander Duyck
This patch adds support for the ethtool get_channels operation. Since the ixgbe driver has to support DCB as well as the other modes the assumption I made here is that the number of channels in DCB modes refers to the number of queues per traffic class, not the number of queues total. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: Make ixgbe_setup_tc usable even when DCB is not enabledAlexander Duyck
The ixgbe_setup_tc code is essentially the same code we need any time we have to update the number of queues. As such I am making it available always and just stripping the DCB specific bits out when DCB is disabled instead of stripping the entire function. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: Update ixgbe driver to use __netdev_pick_tx in ixgbe_select_queueAlexander Duyck
This change updates the ixgbe driver to use __netdev_pick_tx instead of the current logic it is using to select a queue. The main result of this change is that ixgbe can now fully support XPS, and in the case of non-FCoE enabled configs it means we don't need to have our own ndo_select_queue. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: Add function for setting XPS queue mappingAlexander Duyck
This change adds support for ixgbe to configure the XPS queue mapping on load. The result of this change is that on open we will now be resetting the number of Tx queues, and then setting the default configuration for XPS based on if ATR is enabled or disabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15ixgbe: Define FCoE and Flow director limits much sooner to allow for changesAlexander Duyck
Instead of adjusting the FCoE and Flow director limits based on the number of CPUs we can define them much sooner. This allows the user to come through later and adjust them once we have updated the code to support the set_channels ethtool operation. I am still allowing for FCoE and RSS queues to be separated if the number queues is less than the number of CPUs. This essentially treats the two groupings like they are two separate traffic classes. In addition I am changing the initialization to use the MAX_TX/RX_QUEUES defines instead of trying to compute the value as it will be possible in upcoming patches for the user to request the maximum number of queues. I have also updated things so that the upper limit on queues is exactly 63 instead of allowing it to go up to 64. The reason for this change is to address the fact thqt the driver only supports up to 63 queue vectors since the hardware supports 64 MSI-X vectors, but one must be reserved for "other" causes. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15igb: increase timeout for ethtool offline self-testStefan Assmann
On several machines with i350 adapters the ethtool offline self-test sometimes fails. This happens because link auto negotiation may take longer than the timeout of 4 seconds. Increasing the timeout by 1 seconds resolves the issue. Output from a failing i350 offline self-test: while [ 1 ]; do ethtool -t eth2 offline; done The test result is PASS The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 0 Loopback test (offline) 0 Link test (on/offline) 0 The test result is FAIL The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 0 Loopback test (offline) 0 Link test (on/offline) 1 The test result is PASS The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 0 Loopback test (offline) 0 Link test (on/offline) 0 Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15igbvf: Make next_to_watch a pointer and adjust memory barriers to avoid racesAlexander Duyck
This change is meant to address several race issues that become possible because next_to_watch could possibly be set to a value that shows that the descriptor is done when it is not. In order to correct that we instead make next_to_watch a pointer that is set to NULL during cleanup, and set to the eop_desc after the descriptor rings have been written. To enforce proper ordering the next_to_watch pointer is not set until after a wmb writing the values to the last descriptor in a transmit. In order to guarantee that the descriptor is not read until after the eop_desc we use the read_barrier_depends which is only really necessary on the alpha architecture. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15e1000e: display a warning message when SmartSpeed worksKoki Sanagi
Current e1000e driver doesn't tell nothing when Link Speed is downgraded due to SmartSpeed. As a result, users suspect that there is something wrong with NIC. If the cause of it is SmartSpeed, there is no means to replace NIC. This patch make e1000e notify users that SmartSpeed worked. Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15e1000: fix whitespace issues and multi-line commentsJeff Kirsher
Fixes whitespace issues, such as lines exceeding 80 chars, needless blank lines and the use of spaces where tabs are needed. In addition, fix multi-line comments to align with the networking standard. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2013-02-15tipc: remove redundant checking for the number of iovecs in a send requestYing Xue
As the number of iovecs in a send request is already limited within UIO_MAXIOV(i.e. 1024) in __sys_sendmsg(), it's unnecessary to check it again in TIPC stack. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-02-15tipc: byte-based overload control on socket receive queueYing Xue
Change overload control to be purely byte-based, using sk->sk_rmem_alloc as byte counter, and compare it to a calculated upper limit for the socket receive queue. For all connection messages, irrespective of message importance, the overload limit is set to a constant value (i.e, 67MB). This limit should normally never be reached because of the lower limit used by the flow control algorithm, and is there only as a last resort in case a faulty peer doesn't respect the send window limit. For datagram messages, message importance is taken into account when calculating the overload limit. The calculation is based on sk->sk_rcvbuf, and is hence configurable via the socket option SO_RCVBUF. Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-02-15tipc: eliminate duplicated discard_rx_queue routineYing Xue
The tipc function discard_rx_queue() is just a duplicated implementation of __skb_queue_purge(). Remove the former and directly invoke __skb_queue_purge(). In doing so, the underscores convey to the code reader, more information about the current locking state that is assumed. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-02-15tipc: fix missing spinlock init in broadcast codeErik Hugne
After commit 3c294cb3 "tipc: remove the bearer congestion mechanism", we try to grab the broadcast bearer lock when sending multicast messages over the broadcast link. This will cause an oops because the lock is never initialized. This is an old bug, but the lock was never actually used before commit 3c294cb3, so that why it was not visible until now. The oops will look something like: BUG: spinlock bad magic on CPU#2, daemon/147 lock: bcast_bearer+0x48/0xffffffffffffd19a [tipc], .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 Pid: 147, comm: daemon Not tainted 3.8.0-rc3+ #206 Call Trace: spin_dump+0x8a/0x8f spin_bug+0x21/0x26 do_raw_spin_lock+0x114/0x150 _raw_spin_lock_bh+0x19/0x20 tipc_bearer_blocked+0x1f/0x40 [tipc] tipc_link_send_buf+0x82/0x280 [tipc] ? __alloc_skb+0x9f/0x2b0 tipc_bclink_send_msg+0x77/0xa0 [tipc] tipc_multicast+0x11b/0x1b0 [tipc] send_msg+0x225/0x530 [tipc] sock_sendmsg+0xca/0xe0 The above can be triggered by running the multicast demo program. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-15net: use skb_reset_mac_len() in dev_gro_receive()Eric Dumazet
We no longer need to use mac_len, lets cleanup things. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-15ieee802154: at86rf230: Remove empty suspend/resume callbacksLars-Peter Clausen
There is no need to implement empty suspend/resume callbacks if there is nothing to do during suspend/resume. The drivers will behave the same with no callbacks or empty callbacks during suspend/resume. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-15stmmac: fix the parsing of the eee_timer parameterGiuseppe CAVALLARO
This pacth fixes the parsing of the eee_timer driver parameter. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-15Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== This series contains updates to igb and ixgbe. Most of the changes are against igb, except for one patch against ixgbe. There are 3 igb fixes from Carolyn which were reported by Dan Carpenter which resolve issues found in the get_i2c_client(). Alex does some cleanup of the igb driver to match similar functionality in ixgbe on transmit. Alex also makes it so that we can enable the use of build_skb for cases where jumbo frames are disabled. The advantage to this is that we do not have to perform a memcpy to populate the header and as a result we see a significant performance improvement. Akeem provides 4 patches to initialize function pointers and do a re-factoring of the function pointers in igb_get_variants() to assist with driver debugging. The ixgbe patch comes from Emil to reshuffle the switch/case structure of the flag assignment to allow for the flags to be set for each MAC type separately. This is needed for new hardware that does not have feature parity with older hardware. v2: updated patches 4 & 5 based on feedback from Ben Hutchings and Eric Dumazet ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 22:05:13 +0000