| Age | Commit message (Collapse) | Author |
|---|
|
When host sends suspend notification to the device, handle
the suspend callbacks in the function driver. Depending on
the remote wakeup capability the device can either trigger a
remote wakeup or wait for the host initiated resume to resume
data transfer.
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/1679694482-16430-7-git-send-email-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When host sends function suspend feature selector to the device,
inspect the received packet and trigger function suspend or
function resume accordingly. Inspect the remote wakeup bit and
arm the function for remote wakeup if it is wakeup capable. Also
host queries the function wakeup capability through a get status
request before sending function resume. Handle such requests in
composite layer.
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/1679694482-16430-6-git-send-email-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
USB host sends function suspend and function resume notifications to
the interface through SET_FEATURE/CLEAR_FEATURE setup packets.
Add support to handle these packets by delegating the requests to
composite layer. Also add support to handle function wake notification
requests to exit from function suspend state.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Link: https://lore.kernel.org/r/1679694482-16430-5-git-send-email-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
USB3.2 spec section 9.2.5.4 quotes that a function may signal that
it wants to exit from Function Suspend by sending a Function
Wake Notification to the host if it is enabled for function
remote wakeup. Add an api in composite layer that can be used
by the function drivers to support this feature. Also expose
a gadget op so that composite layer can trigger a wakeup request
to the UDC driver.
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Link: https://lore.kernel.org/r/1679694482-16430-4-git-send-email-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
An usb device can initate a remote wakeup and bring the link out of
suspend as dictated by the DEVICE_REMOTE_WAKEUP feature selector.
Add support to handle this packet and set the remote wakeup capability.
Some hosts may take longer time to initiate the resume signaling after
device triggers a remote wakeup. So add async support to the wakeup API
by enabling link status change events.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Link: https://lore.kernel.org/r/1679694482-16430-3-git-send-email-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The wakeup bit in the bmAttributes field indicates whether the device
is configured for remote wakeup. But this field should be allowed to
set only if the UDC supports such wakeup mechanism. So configure this
field based on UDC capability. Also inform the UDC whether the device
is configured for remote wakeup by implementing a gadget op.
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Link: https://lore.kernel.org/r/1679694482-16430-2-git-send-email-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Per binding doc, update the compatible
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230322052504.2629429-11-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is no SMMU in i.MX8DXL, drop #stream-id-cells which
is for SMMU-v2.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230322052504.2629429-9-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update usb compatible per binding doc
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230322052504.2629429-8-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update usb compatible per binding doc
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230322052504.2629429-7-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update usb compatible per binding doc
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230322052504.2629429-6-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update usb compatible per binding doc
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230322052504.2629429-5-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add power-domains optional property
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230322052504.2629429-4-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the binding to DT schema format. To fix the dtbs_check
error, some properties were also added, such as nvidia,phy, reset-names
ulpi; missing compatibles are added.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230322052504.2629429-3-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert usbmisc-imx to DT schema format, add missing compatibles
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230322052504.2629429-2-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Explicitly set and clear wakeup config so we don't leave anything
to chance.
Clear wakeup status on suspend so we know what caused wake up.
The LINESTATE wake up should not be enabled in device mode
if we are not connected to a USB host and in USB suspend (U2/L3)
else it will cause spurious wake up.
For now, don't enable LINESTATE. This means wake up from
USB resume will not work but at least we won't have any spurious
wake ups.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230324114429.21838-1-rogerq@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
According to the description of platform_get_irq()
* Return: non-zero IRQ number on success,
negative error number on failure.
and the code, platform_get_irq() will return -EINVAL
instead of IRQ0.
So platform_get_irq() no longer returns 0, there is no
need to check whether the return value is 0.
Found by Smatch:
drivers/usb/dwc3/host.c:60 dwc3_host_get_irq()
warn: platform_get_irq() does not return zero
Signed-off-by: Mingxuan Xiang <mx_xiang@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230324060934.1686859-1-mx_xiang@hust.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usb_amd_find_chipset_info()
'info' is local to the function. There is no need to zeroing it within
a spin_lock section. Moreover, there is no need to explicitly initialize
the .need_pll_quirk field.
Initialize the structure when defined and remove the now useless memset().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/08ee42fced6af6bd56892cd14f2464380ab071fa.1679600396.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a spelling mistakes in dev_warn messages. Fix them.
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Link: https://lore.kernel.org/r/20230325063832.1642-1-wangdeming@inspur.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A recent patch caused an unused-function warning in builds with
CONFIG_PM disabled, after the function became marked 'static':
drivers/usb/host/xhci-pci.c:91:13: error: 'xhci_msix_sync_irqs' defined but not used [-Werror=unused-function]
91 | static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
| ^~~~~~~~~~~~~~~~~~~
This could be solved by adding another #ifdef, but as there is
a trend towards removing CONFIG_PM checks in favor of helper
macros, do the same conversion here and use pm_ptr() to get
either a function pointer or NULL but avoid the warning.
As the hidden functions reference some other symbols, make
sure those are visible at compile time, at the minimal cost of
a few extra bytes for 'struct usb_device'.
Fixes: 9abe15d55dcc ("xhci: Move xhci MSI sync function to to xhci-pci")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230328131114.1296430-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ENTER() used to show function name which called during runtime, ftrace can
be used to get same information, let's remove it.
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/1679911940-4727-1-git-send-email-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For the Processing Unit and Camera Terminal descriptors defined in
the UVC Gadget we currently hard-code values into their bmControls
fields, which enumerates which controls the gadget is able to
support. This isn't appropriate since only the userspace companion
program to the kernel driver will know which controls are supported.
Make the configfs attributes that point to those fields read/write
so userspace can set them to appropriate values.
Document the new behaviour at the same time so the functionality is
clear.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230309105825.216745-1-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some development boards don't have the interrupt line connected.
In such cases we can resort to polling the interrupt status.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230324131853.41102-1-rogerq@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes here, and the USB gadget update for future
development patches to be based on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are a small set of USB and Thunderbolt driver fixes for reported
problems and a documentation update, for 6.3-rc4.
Included in here are:
- documentation update for uvc gadget driver
- small thunderbolt driver fixes
- cdns3 driver fixes
- dwc3 driver fixes
- dwc2 driver fixes
- chipidea driver fixes
- typec driver fixes
- onboard_usb_hub device id updates
- quirk updates
All of these have been in linux-next with no reported problems"
* tag 'usb-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (30 commits)
usb: dwc2: fix a race, don't power off/on phy for dual-role mode
usb: dwc2: fix a devres leak in hw_enable upon suspend resume
usb: chipidea: core: fix possible concurrent when switch role
usb: chipdea: core: fix return -EINVAL if request role is the same with current role
thunderbolt: Rename shadowed variables bit to interrupt_bit and auto_clear_bit
thunderbolt: Disable interrupt auto clear for rings
thunderbolt: Use const qualifier for `ring_interrupt_index`
usb: gadget: Use correct endianness of the wLength field for WebUSB
uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS583Gen 2
usb: cdnsp: changes PCI Device ID to fix conflict with CNDS3 driver
usb: cdns3: Fix issue with using incorrect PCI device function
usb: cdnsp: Fixes issue with redundant Status Stage
MAINTAINERS: make me a reviewer of USB/IP
thunderbolt: Use scale field when allocating USB3 bandwidth
thunderbolt: Limit USB3 bandwidth of certain Intel USB4 host routers
thunderbolt: Call tb_check_quirks() after initializing adapters
thunderbolt: Add missing UNSET_INBOUND_SBTX for retimer access
thunderbolt: Fix memory leak in margining
usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host"
docs: usb: Add documentation for the UVC Gadget
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Fix a corner case where vruntime of a task is not being sanitized
* tag 'sched_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Sanitize vruntime of entity being migrated
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Properly clear perf event status tracking in the AMD perf event
overflow handler
* tag 'perf_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/amd/core: Always clear status for idx
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Borislav Petkov:
- Do the delayed RCU wakeup for kthreads in the proper order so that
former doesn't get ignored
- A noinstr warning fix
* tag 'core_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry/rcu: Check TIF_RESCHED _after_ delayed RCU wake-up
entry: Fix noinstr warning in __enter_from_user_mode()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a AMX ptrace self test
- Prevent a false-positive warning when retrieving the (invalid)
address of dynamic FPU features in their init state which are not
saved in init_fpstate at all
- Randomize per-CPU entry areas only when KASLR is enabled
* tag 'x86_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/x86/amx: Add a ptrace test
x86/fpu/xstate: Prevent false-positive warning in __copy_xstate_uabi_buf()
x86/mm: Do not shuffle CPU entry areas without KASLR
|
|
Pull cifs client fixes from Steve French:
"Twelve cifs/smb3 client fixes (most also for stable)
- forced umount fix
- fix for two perf regressions
- reconnect fixes
- small debugging improvements
- multichannel fixes"
* tag 'smb3-client-fixes-6.3-rc3' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix unusable share after force unmount failure
cifs: fix dentry lookups in directory handle cache
smb3: lower default deferred close timeout to address perf regression
cifs: fix missing unload_nls() in smb2_reconnect()
cifs: avoid race conditions with parallel reconnects
cifs: append path to open_enter trace event
cifs: print session id while listing open files
cifs: dump pending mids for all channels in DebugData
cifs: empty interface list when server doesn't support query interfaces
cifs: do not poll server interfaces too regularly
cifs: lock chan_lock outside match_session
cifs: check only tcon status on tcon related functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix a crash when using NFS with krb5p
* tag 'nfsd-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix a crash in gss_krb5_checksum()
|
|
Pull yet more xfs bug fixes from Darrick Wong:
"The first bugfix addresses a longstanding problem where we use the
wrong file mapping cursors when trying to compute the speculative
preallocation quantity. This has been causing sporadic crashes when
alwayscow mode is engaged.
The other two fixes correct minor problems in more recent changes.
- Fix the new allocator tracepoints because git am mismerged the
changes such that the trace_XXX got rebased to be in function YYY
instead of XXX
- Ensure that the perag AGFL_RESET state is consistent with whatever
we've just read off the disk
- Fix a bug where we used the wrong iext cursor during a write begin"
* tag 'xfs-6.3-fixes-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix mismerged tracepoints
xfs: clear incore AGFL_RESET state if it's not needed
xfs: pass the correct cursor to xfs_iomap_prealloc_size
|
|
Pull xfs percpu counter fixes from Darrick Wong:
"We discovered a filesystem summary counter corruption problem that was
traced to cpu hot-remove racing with the call to percpu_counter_sum
that sets the free block count in the superblock when writing it to
disk. The root cause is that percpu_counter_sum doesn't cull from
dying cpus and hence misses those counter values if the cpu shutdown
hooks have not yet run to merge the values.
I'm hoping this is a fairly painless fix to the problem, since the
dying cpu mask should generally be empty. It's been in for-next for a
week without any complaints from the bots.
- Fix a race in the percpu counters summation code where the
summation failed to add in the values for any CPUs that were dying
but not yet dead. This fixes some minor discrepancies and incorrect
assertions when running generic/650"
* tag 'xfs-6.3-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
pcpcntr: remove percpu_counter_sum_all()
fork: remove use of percpu_counter_sum_all
pcpcntrs: fix dying cpu summation race
cpumask: introduce for_each_cpu_or
|
|
Pull xfs fixes from Darrick Wong:
"This batch started with some debugging enhancements to the new
allocator refactoring that we put in 6.3-rc1 to assist developers in
rebasing their dev branches.
As for more serious code changes -- there's a bug fix to make the
lockless allocator scan the whole filesystem before resorting to the
locking allocator. We're also adding a selftest for the venerable
directory/xattr hash function to make sure that it produces consistent
results so that we can address any fallout as soon as possible.
- Add a few debugging assertions so that people (me) trying to port
code to the new allocator functions don't mess up the caller
requirements
- Relax some overly cautious lock ordering enforcement in the new
allocator code, which means that file allocations will locklessly
scan for the best space they can get before backing off to the
traditional lock-and-really-get-it behavior
- Add tracepoints to make it easier to trace the xfs allocator
behavior
- Actually test the dir/xattr hash algorithm to make sure it produces
consistent results across all the platforms XFS supports"
* tag 'xfs-6.3-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: test dir/attr hash when loading module
xfs: add tracepoints for each of the externally visible allocators
xfs: walk all AGs if TRYLOCK passed to xfs_alloc_vextent_iterate_ags
xfs: try to idiot-proof the allocators
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- it87: Fix voltage scaling for chips with 10.9mV ADCs
- xgene: Fix ioremap and memremap leak
- peci/cputemp: Fix miscalculated DTS temperature for SKX
- hwmon core: fix potential sensor registration failure with thermal
subsystem if of_node is missing
* tag 'hwmon-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon (it87): Fix voltage scaling for chips with 10.9mV ADCs
hwmon: (xgene) Fix ioremap and memremap leak
hwmon: fix potential sensor registration fail if of_node is missing
hwmon: (peci/cputemp) Fix miscalculated DTS for SKX
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes, 8 of which are cc:stable. 11 are for MM, the remainder
are for other subsystems"
* tag 'mm-hotfixes-stable-2023-03-24-17-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
mm: mmap: remove newline at the end of the trace
mailmap: add entries for Richard Leitner
kcsan: avoid passing -g for test
kfence: avoid passing -g for test
mm: kfence: fix using kfence_metadata without initialization in show_object()
lib: dhry: fix unstable smp_processor_id(_) usage
mailmap: add entry for Enric Balletbo i Serra
mailmap: map Sai Prakash Ranjan's old address to his current one
mailmap: map Rajendra Nayak's old address to his current one
Revert "kasan: drop skip_kasan_poison variable in free_pages_prepare"
mailmap: add entry for Tobias Klauser
kasan, powerpc: don't rename memintrinsics if compiler adds prefixes
mm/ksm: fix race with VMA iteration and mm_struct teardown
kselftest: vm: fix unused variable warning
mm: fix error handling for map_deny_write_exec
mm: deduplicate error handling for map_deny_write_exec
checksyscalls: ignore fstat to silence build warning on LoongArch
nilfs2: fix kernel-infoleak in nilfs_ioctl_wrap_copy()
test_maple_tree: add more testing for mas_empty_area()
maple_tree: fix mas_skip_node() end slot detection
...
|
|
Pull ksmbd server fixes from Steve French:
- return less confusing messages on unsupported dialects
(STATUS_NOT_SUPPORTED instead of I/O error)
- fix for overly frequent inactive session termination
- fix refcount leak
- fix bounds check problems found by static checkers
- fix to advertise named stream support correctly
- Fix AES256 signing bug when connected to from MacOS
* tag '6.3-rc3-ksmbd-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: return unsupported error on smb1 mount
ksmbd: return STATUS_NOT_SUPPORTED on unsupported smb2.0 dialect
ksmbd: don't terminate inactive sessions after a few seconds
ksmbd: fix possible refcount leak in smb2_open()
ksmbd: add low bound validation to FSCTL_QUERY_ALLOCATED_RANGES
ksmbd: add low bound validation to FSCTL_SET_ZERO_DATA
ksmbd: set FILE_NAMED_STREAMS attribute in FS_ATTRIBUTE_INFORMATION
ksmbd: fix wrong signingkey creation when encryption is AES256
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"As usual, most of the bug fixes address issues in the devicetree
files, and out of these, most are for the Qualcomm and NXP platforms,
including:
- A missing 'reserved-memory' property on LG G Watch R that is needed
to prevent clashing with firmware
- Annotations for cache coherency on multiple machines
- Corrections for pinctrl, regulator, clock, iommu and power domain
properties for i.MX and Qualcomm to correctly reflect the hardware
settings
- Firmware file names on multiple machines SA8540P Ride board
- An incompatible change to the qcom vadc driver requires adding
individual labels
- Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property
and switch to the new bindings.
- A fix for PCI bus address translation Tegra194 and Tegra234.
There are also a couple of device driver fixes, addressing:
- A race condition in the amdtee driver
- A performance regression in the Qualcomm 'llcc' driver
- An unitialized variable use NXP i.MX 'weim' driver
- Error handling issues in Qualcomm 'rmtfs', and 'scm' drivers and
the Arm scmi firmware driver"
* tag 'arm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on
arm64: dts: imx93: add missing #address-cells and #size-cells to i2c nodes
bus: imx-weim: fix branch condition evaluates to a garbage value
arm64: dts: imx8mn: specify #sound-dai-cells for SAI nodes
ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl
ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl
ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl
arm64: dts: imx93: Fix eqos properties
arm64: dts: imx8mp: Fix LCDIF2 node clock order
arm64: dts: imx8mm-nitrogen-r2: fix WM8960 clock name
arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio
firmware: qcom: scm: fix bogus irq error at probe
arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent
arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware
arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- rk817: Fix compiler warning
- cros_usbpd-charger: Fix excessive error printing
- axp288_fuel_gauge: handle platform_get_irq error
- bq24190 and da9150: Fix race condition in remove path
* tag 'for-v6.3-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: da9150: Fix use after free bug in da9150_charger_remove due to race condition
power: supply: bq24190: Fix use after free bug in bq24190_remove due to race condition
power: supply: axp288_fuel_gauge: Added check for negative values
power: supply: cros_usbpd: reclassify "default case!" as debug
power: supply: rk817: Fix unsigned comparison with less than zero
|
|
Pull drm fixes from Daniel Vetter:
- usual pile of fixes for amdgpu & i915
- probe error handling fixes for meson, lt8912b bridge
- the host1x patch from Arnd
- panel-orientation fix for Lenovo Book X90F
* tag 'drm-fixes-2023-03-24' of git://anongit.freedesktop.org/drm/drm: (23 commits)
gpu: host1x: fix uninitialized variable use
drm/amd/display: Set dcn32 caps.seamless_odm
drm/amd/display: fix wrong index used in dccg32_set_dpstreamclk
drm/amdgpu/nv: Apply ASPM quirk on Intel ADL + AMD Navi
drm/amd/display: remove outdated 8bpc comments
drm/amdgpu/gfx: set cg flags to enter/exit safe mode
drm/amdgpu: Force signal hw_fences that are embedded in non-sched jobs
drm/amdgpu: add mes resume when do gfx post soft reset
drm/amdgpu: skip ASIC reset for APUs when go to S4
drm/amdgpu: reposition the gpu reset checking for reuse
drm/bridge: lt8912b: return EPROBE_DEFER if bridge is not found
drm/meson: fix missing component unbind on bind errors
drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Book X90F
Revert "drm/i915/hwmon: Enable PL1 power limit"
drm/i915: Update vblank timestamping stuff on seamless M/N change
drm/i915: Fix format for perf_limit_reasons
drm/i915/gt: perform uc late init after probe error injection
drm/i915/active: Fix missing debug object activation
drm/i915/guc: Fix missing ecodes
drm/i915/mtl: Disable MC6 for MTL A step
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM thin to work as a swap device by using 'limit_swap_bios' DM
target flag (initially added to allow swap to dm-crypt) to throttle
the amount of outstanding swap bios.
- Fix DM crypt soft lockup warnings by calling cond_resched() from the
cpu intensive loop in dmcrypt_write().
- Fix DM crypt to not access an uninitialized tasklet. This fix allows
for consistent handling of IO completion, by _not_ needlessly punting
to a workqueue when tasklets are not needed.
- Fix DM core's alloc_dev() initialization for DM stats to check for
and propagate alloc_percpu() failure.
* tag 'for-6.3/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm stats: check for and propagate alloc_percpu failure
dm crypt: avoid accessing uninitialized tasklet
dm crypt: add cond_resched() to dmcrypt_write()
dm thin: fix deadlock when swapping to thin device
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Send Identify with CNS 06h only to I/O controllers (Martin
George)
- Fix nvme_tcp_term_pdu to match spec (Caleb Sander)
- Pass in issue_flags for uring_cmd, so the end_io handlers don't need
to assume what the right context is (me)
- Fix for ublk, marking it as LIVE before adding it to avoid races on
the initial IO (Ming)
* tag 'block-6.3-2023-03-24' of git://git.kernel.dk/linux:
nvme-tcp: fix nvme_tcp_term_pdu to match spec
nvme: send Identify with CNS 06h only to I/O controllers
block/io_uring: pass in issue_flags for uring_cmd task_work handling
block: ublk_drv: mark device as LIVE before adding disk
|
|
Pull io_uring fixes from Jens Axboe:
- Fix an issue with repeated -ECONNREFUSED on a socket (me)
- Fix a NULL pointer deference due to a stale lookup cache for
allocating direct descriptors (Savino)
* tag 'io_uring-6.3-2023-03-24' of git://git.kernel.dk/linux:
io_uring/rsrc: fix null-ptr-deref in io_file_bitmap_get()
io_uring/net: avoid sending -ECONNABORTED on repeated connection requests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These address two recent regressions related to thermal control.
Specifics:
- Restore the thermal core behavior regarding zero-temperature trip
points to avoid a driver regression (Ido Schimmel)
- Fix a recent regression in the ACPI processor driver preventing it
from changing the number of CPU cooling device states exposed via
sysfs after the given CPU cooling device has been registered
(Rafael Wysocki)"
* tag 'thermal-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Restore behavior regarding invalid trip points
ACPI: processor: thermal: Update CPU cooling devices on cpufreq policy changes
thermal: core: Introduce thermal_cooling_device_update()
thermal: core: Introduce thermal_cooling_device_present()
ACPI: processor: Reorder acpi_processor_driver_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These add new ACPI IRQ override and backlight detection quirks.
Specifics:
- Add backlight=native DMI quirk for Acer Aspire 3830TG to the ACPI
backlight driver (Hans de Goede)
- Add an ACPI IRQ override quirk for Medion S17413 (Aymeric Wibo)"
* tag 'acpi-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Add Medion S17413 to IRQ override quirk
ACPI: video: Add backlight=native DMI quirk for Acer Aspire 3830TG
|
|
At some point in between sending this patch to the list and merging it
into for-next, the tracepoints got all mixed up because I've
over-reliant on automated tools not sucking. The end result is that the
tracepoints are all wrong, so fix them.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
If user does forced unmount ("umount -f") while files are still open
on the share (as was seen in a Kubernetes example running on SMB3.1.1
mount) then we were marking the share as "TID_EXITING" in umount_begin()
which caused all subsequent operations (except write) to fail ... but
unfortunately when umount_begin() is called we do not know yet that
there are open files or active references on the share that would prevent
unmount from succeeding. Kubernetes had example when they were doing
umount -f when files were open which caused the share to become
unusable until the files were closed (and the umount retried).
Fix this so that TID_EXITING is not set until we are about to send
the tree disconnect (not at the beginning of forced umounts in
umount_begin) so that if "umount -f" fails (due to open files or
references) the mount is still usable.
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Get rid of any prefix paths in @path before lookup_positive_unlocked()
as it will call ->lookup() which already adds those prefix paths
through build_path_from_dentry().
This has caused a performance regression when mounting shares with a
prefix path where readdir(2) would end up retrying several times to
open bad directory names that contained duplicate prefix paths.
Fix this by skipping any prefix paths in @path before calling
lookup_positive_unlocked().
Fixes: e4029e072673 ("cifs: find and use the dentry for cached non-root directories also")
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Performance tests with large number of threads noted that the change
of the default closetimeo (deferred close timeout between when
close is done by application and when client has to send the close
to the server), to 5 seconds from 1 second, significantly degraded
perf in some cases like this (in the filebench example reported,
the stats show close requests on the wire taking twice as long,
and 50% regression in filebench perf). This is stil configurable
via mount parm closetimeo, but to be safe, decrease default back
to its previous value of 1 second.
Reported-by: Yin Fengwei <fengwei.yin@intel.com>
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/lkml/997614df-10d4-af53-9571-edec36b0e2f3@intel.com/
Fixes: 5efdd9122eff ("smb3: allow deferred close timeout to be configurable")
Cc: stable@vger.kernel.org # 6.0+
Tested-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
