| Age | Commit message (Collapse) | Author |
|---|
|
When hotplug and/or a powered down idle state are supported cases will
arise where a non-zero VPE must be brought online without VPE 0, and it
where multiple VPEs must be onlined simultaneously. This patch prepares
for that by:
- Splitting struct boot_config into core & VPE boot config structures,
allocated one per core or VPE respectively. This allows for multiple
VPEs to be onlined simultaneously without clobbering each others
configuration.
- Indicating which VPEs should be online within a core at any given
time using a bitmap. This allows multiple VPEs to be brought online
simultaneously and also indicates to VPE 0 whether it should halt
after starting any non-zero VPEs that should be online within the
core. For example if all VPEs within a core are offlined via hotplug
and the user onlines the second VPE within that core:
1) The core will be powered up.
2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to
initialise the core.
3) VPE 0 will start VPE 1 because its bit is set in the cores
bitmap.
4) VPE 0 will halt itself because its bit is clear in the cores
bitmap.
- Moving the core & VPE initialisation to assembly code which does not
make any use of the stack. This is because if a non-zero VPE is to
be brought online in a powered down core then when VPE 0 of that
core runs it may not have a valid stack, and even if it did then
it's messy to run through parts of generic kernel code on VPE 0
before starting the correct VPE.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
|
|
This patch allows use of the MT ASE yield instruction from uasm. It will
be used by a subsequent patch.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
|
|
This patch allows use of the wait instruction from uasm. It will be used
by a subsequent patch.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
|
|
This patch allows use of the sync instruction from uasm. It will be used
by a subsequent patch.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
|
|
This patch allows use of the jalr instruction from uasm. It will be used
by a subsequent patch.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
|
|
This patch allows for use of the beq instruction with labels from uasm,
much as bne & others already do. It will be used by a subsequent patch.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
|
|
The opcode for the wait instruction within POOL32AXf was missing. This
patch adds it for use by a subsequent patch.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
|
|
The opcode for the sync instruction within POOL32AXf was missing. This
patch adds it for use by a subsequent patch.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
|
|
The opcode for the MT ASE yield instruction within the spec3 group was
missing. This patch adds it for use by a subsequent patch.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
|
|
The func field for the wait instruction was missing from inst.h - this
patch adds it.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
|
|
Define a macro to write to the current TCs TCHalt register. This will be
used by a subsequent patch.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
|
|
This is identical to kmap_coherent apart from the cache coherency
attribute used for the TLB entry, so kmap_coherent is abstracted to
kmap_prot which is then called for both kmap_coherent &
kmap_noncoherent. This will be used by a subsequent patch.
Suggested-by: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
|
|
SNI RM code has its own EARLY_PRINTK support no need for some generic 8250
stuff.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6715/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
CONFIG_DMA_COHERENT is no longer set; default to noncoherent io on
Au1200 revision AB to make USB work.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/6745/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
In arch_setup_msi_irq(), there is no case for PCIe2. So board which have PCIe2 functionality
fails to boot with "Kernel panic - not syncing: arch_setup_msi_irq: Invalid octeon_dma_bar_type"
message. This patch solve this problem.
Signed-off-by: Eunbong Song <eunb.song@samsung.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/6747/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
These defconfigs contain the CONFIG_M25P80 symbol, which is now
dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy
the new dependency.
At the same time, drop the now-nonexistent CONFIG_MTD_CHAR symbol.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Huang Shijie <b32955@freescale.com>
Cc: Marek Vasut <marex@denx.de>
Cc: linux-mtd@lists.infradead.org
Patchwork: https://patchwork.linux-mips.org/patch/6878/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Allow 64-bit userspace programs to use ll64 types. The define name
comes from commit 2c9c6ce0199a4d252e20c531cfdc9d24e39235c0 (powerpc:
Add __SANE_USERSPACE_TYPES__ to asm/types.h for LL64).
The patch allows to compile perf on MIPS64 and eliminates the following
warnings:
tests/attr.c:74:4: error: format '%llu' expects argument of type 'long
long unsigned int', but argument 6 has type '__u64' [-Werror=format=]
Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/6890/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This timer does not support oneshot mode and as such the system remains
in periodic mode and won't support high res timers.
This patch adds a note about this in Kconfig and lets it depend on
!highres so users which want to use high timers don' stuck with this
timer.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: Hua Yan <yanh@lemote.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Hongliang Tao <taohl@lemote.com>
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/6935/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Nothing was using the method and there isn't any need for this hook. This
leaves smp_cpus_done() empty for the moment.
As suggested by Paul Bolle <pebolle@tiscali.nl>.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
A few platforms lack a 'device_type = "memory"' for their memory
nodes, relying on an old ppc quirk in order to discover its memory.
Add the missing data so that all parsing code can find memory nodes
correctly.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: <stable@vger.kernel.org>
Cc: gaurav.minocha@alumni.ubc.ca
Patchwork: https://patchwork.linux-mips.org/patch/6989/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This patch moves data allocated using kzalloc to managed data allocated
using devm_kzalloc and cleans now unnecessary kfrees in probe and remove
functions. Also, the now unnecessary labels out_mem and out are done
away with. The error handling code is moved under if and return 0 is now
at the end of the function.
The following Coccinelle semantic patch was used for making the change:
@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
.probe = probefn,
.remove = removefn,
};
@prb@
identifier platform.probefn, pdev;
expression e, e1, e2;
@@
probefn(struct platform_device *pdev, ...) {
<+...
- e = kzalloc(e1, e2)
+ e = devm_kzalloc(&pdev->dev, e1, e2)
...
?-kfree(e);
...+>
}
@rem depends on prb@
identifier platform.removefn;
expression e;
@@
removefn(...) {
<...
- kfree(e);
...>
}
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Tested-by: Markos Chandras <markos.chandras@imgtec.com>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/6977/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
First introduced in e6ca4e5bf11466b5e9423a1e4ea51a8216c4b9b6
"MIPS: malta: malta-memory: Add support for the 'ememsize' variable"
but it is not needed since both variables are visible to the compiler.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: <stable@vger.kernel.org> # v3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6985/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Following the removal of SMTC, MIPS_MT_SMP is the only available
MT/SMP option so make it a regular Kconfig symbol.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/6720/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Nobody is maintaining SMTC anymore and there also seems to be no userbase.
Which is a pity - the SMTC technology primarily developed by Kevin D.
Kissell <kevink@paralogos.com> is an ingenious demonstration for the MT
ASE's power and elegance.
Based on Markos Chandras <Markos.Chandras@imgtec.com> patch
https://patchwork.linux-mips.org/patch/6719/ which while very similar did
no longer apply cleanly when I tried to merge it plus some additional
post-SMTC cleanup - SMTC was a feature as tricky to remove as it was to
merge once upon a time.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Missing a "|" in AUDIT_ARCH_MIPSEL64N32 macro definition.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/6978/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
RM9000 support was removed a while ago but this bit crept back in through
commit 69f24d17 [MIPS: Optimize current_cpu_type() for better code.] which
had been developed before but merged after RM9000 support was removed.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
|
|
There are two checks for CONFIG_SIBYTE_BCM1480_PROF in the tree since
v2.6.15. The related Kconfig symbol has never been added to the tree. So
these checks have always evaluated to false. Besides, one of these
checks guards a call of sbprof_cpu_intr(). But that function is not
defined. Remove all this.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/6981/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Since v2.6.39 there are checks for CONFIG_MSP_HAS_DUAL_USB and checks
for CONFIG_MSP_HAS_TSMAC in the code. The related Kconfig symbols have
never been added. These checks have evaluated to false for three years
now. Remove them and the code they have been hiding.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/6982/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Three checks for CONFIG_CAVIUM_GDB were added in v2.6.29. But the
Kconfig symbol CAVIUM_GDB was never added to the tree. Remove these
checks.
Also remove the last reference to octeon_get_boot_debug_flag(). There is
no definition of that function anyway.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Tested-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>)
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/6976/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Checks for CONFIG_I2C_PNX0105 were added in v2.6.28. But the related
Kconfig symbol has not been added to the tree. Remove these checks.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/6958/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Commit 8b284dbc2200 ("MIPS: PNX Removing dead CONFIG_PMCTWILED") missed
one reference to CONFIG_PMCTWILED in the code. It also missed one
related reference to pmctwiled_setup(). Remove these references now.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/6957/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
A check for CONFIG_CAVIUM_REPORT_SINGLE_BIT_ECC was added in v2.6.29,
but without the related Kconfig symbol. Remove this check.
Also remove the test for an "ecc_verbose" kernel parameter. It is
undocumented and has no effect anyway.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/6955/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
R4600_HIT_CACHEOP_WAR_IMPL is only needed on R4600 v1.6 and the R4600 has
data cache lines that are always 32 bytes so the call is pointless in
r4k_blast_dcache_page_dc64.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Move microMIPS32_to_MIPS32() to a separate file which only gets built
for mipsMIPS configurations; for other configurations the optimizer
eleminates calls to microMIPS32_to_MIPS32().
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Previously math-emu was using the IEEE-754 constants internally. These
were differing by having the constants for rounding to +/- infinity
switched, so a conversion was necessary. This would be entirely
avoidable if the MIPS constants were used throughout, so get rid of
the bloat.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
mm_isBranchInstr() did reside in the math emu code even though it logically
is separate and also is used outside the math emu code. In addition GCC 4.9.0
leaves the following unnnecessarily bloated function body for a non-microMIPS
configuration:
<mm_isBranchInstr>:
105c: afa50004 sw a1,4(sp)
1060: afa60008 sw a2,8(sp)
1064: afa7000c sw a3,12(sp)
1068: 03e00008 jr ra
106c: 00001021 move v0,zero
which stores arguments that are never going to be used on the stack frame.
Move mm_isBranchInstr() from cp1emu.c to branch.c, then split mm_isBranchInstr()
into a __mm_isBranchInstr() core and a mm_isBranchInstr() wrapper inline function
which only invokes __mm_isBranchInstr() on microMIPS configurations.
This shaves off 112 bytes off the kernel and improves code flow a bit.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
o Only define variables in the outermost block
o One empty line at most
o Format comments as per CodingStyle
o Update FSF address in licensing term comment
o Spell FPU and MIPS in all capitals.
o Remove ####-type of lines in comments.
o Try to make things a bit most consistent between sp_*.c / dp_*.c files.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
There are two version of get_rounding(), one for single precision, one
for double precision. Add a ieee754sp_ rsp. ieee754dp_ prefix for
clarity.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
All it really did was throw a printk for no obvious reason.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
ieee754d.o contains only debug code and dp_sqrt.o and sp_sqrt.o contain
code which for MIPS I/II/III systems we don't want to link. Again the
savings can be considerable for some systems:
$ mips-linux-size --totals ieee754d.o dp_sqrt.o sp_sqrt.o
text data bss dec hex filename
1624 0 0 1624 658 ieee754d.o
2016 0 0 2016 7e0 dp_sqrt.o
736 0 0 736 2e0 sp_sqrt.o
4376 0 0 4376 1118 (TOTALS)
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Shaves another 16 bytes off but more importantly avoids function calls.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Shrinks the FPU emulator by 4528 bytes.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
