| Age | Commit message (Collapse) | Author |
|---|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "Device tree changes for dra7 sdhci for v4.17" from Tony Lindgren:
This series from Sekhar Nori and Kishon Vijay Abraham I adds
sdhci related nodes for dra7. To support higher transfer speeds,
the iodelay pinmux controller needs to be also configured.
Note that as these changes need SDHCI_OMAP to be enabled to avoid
breaking booting for various systems, these changes are based on
two defconfig changes to enable SDHCI_OMAP in the defconfig files.
* tag 'omap-for-v4.17/dt-sdhci-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am57xx-idk: Select pull down for mmc1_clk line in default mode
ARM: dts: dra71-evm: Select pull down for mmc1_clk line in default mode
ARM: dts: dra71-evm: Correct evm_sd regulator max voltage
ARM: dts: dra76-evm: Add "vqmmc-supply" property for mmc2
ARM: dts: am57xx-idk: Add "vqmmc-supply" property for mmc2
ARM: dts: dra7-evm: Add "vqmmc-supply" property for mmc2
ARM: dts: dra7-evm: Remove mmc specific pinmux
ARM: dts: am57xx-beagle-x15: Add "vqmmc-supply" property for mmc2
ARM: dts: dra76-evm: Add pinctrl data for higher speed MMC/SD modes
ARM: dts: dra76-evm: Shift to using common IOdelay data
ARM: dts: dra76x: Create a common file with MMC/SD IOdelay data
ARM: omap2plus_defconfig: Enable CONFIG_MMC_SDHCI_OMAP
ARM: multi_v7_defconfig: Enable CONFIG_MMC_SDHCI_OMAP
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt
Pull "ARM: Keystone DTS for 4.17" from Santosh Shilimkar:
- Andrew's various DTS warning fixes
- clock address separator fix
- EDAC support for EMIF
- serial dts node unit address format fix
* tag 'keystone_dts_for_4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone-k2g: Fix unit-address formatting for serial nodes
dt-bindings: memory: ti-emif: add edac support under emif
ARM: dts: keystone-k2e-clocks: Fix missing unit address separator
ARM: dts: keystone-k2g: Move usb-phy nodes out of soc0
ARM: dts: keystone-k2g: Move keystone_dsp_gpio to under device-state-control
ARM: dts: keystone-k2g: Move keystone_irq to under device-state-control
ARM: dts: keystone-k2hk: Move keystone_dsp_gpio to under device-state-control
ARM: dts: keystone-k2l: Move keystone_dsp_gpio to under device-state-control
ARM: dts: keystone-k2e: Move keystone_dsp_gpio to under device-state-control
ARM: dts: keystone: Move reset-controller to under device-state-control
ARM: dts: keystone: Move keystone_irq to under device-state-control
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "Device tree changes for omap variants for v4.17" from Tony Lindgren:
This series of changes updates the device tree files for omaps:
- Nokia N9 support for magnetometer
- Update at24 to use atmel as manufacturer for am335x-boneblue
- Add support for am33xx based PDU001 board
- Update Droid 4 touchscreen for reset-gpios and add audio
codec and soundcard
- Remove unused dra7 cooling level nodes
- A series of changes to configure am335x and am437x for PM
- Add pinmuxing for i2c2 and 3 for LogicPD boards
- Add EMIF interrupt infor for am437x and am335x
- Add missing omap3 sound-dai-cells
* tag 'omap-for-v4.17/dt-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
ARM: dts: omap4-droid4: add soundcard
ARM: dts: motorola-cpcap-mapphone: add audio-codec
ARM: dts: omap3: Add missing #sound-dai-cells
ARM: dts: am43xx: add emif interrupt info
ARM: dts: am33xx: add emif interrupt info
ARM: dts: Add pinmuxing for i2c2 and i2c3 for LogicPD SOM-LV
ARM: dts: Add pinmuxing for i2c2 and i2c3 for LogicPD torpedo
ARM: dts: am4372: Mark omap_l3_noc with ti,no-idle
ARM: dts: am4372: Mark emif with ti,no-idle
ARM: dts: am33xx: Mark emif with ti,no-idle
ARM: dts: am4372: Add soc node
ARM: dts: am33xx: Add pm-sram phandle to soc node
ARM: dts: am4372: Update emif node
ARM: dts: am33xx: Update emif node
ARM: dts: am4372: Reserve pm code and data regions in ocmcram sram node
ARM: dts: am33xx: Reserve pm code and data regions in ocmcram sram node
ARM: dts: omap: Remove "cooling-{min|max}-level" for CPU nodes
ARM: dts: omap4-droid4: update touchscreen
ARM: dts: am33xx: add PDU001 board
ARM: dts: use 'atmel' as at24 manufacturer in am335x-boneblue
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt
Pull "ARMv8 Vexpress/Juno DT updates for v4.17" from Sudeep Holla:
1. Extends support for missing 3 GICv2m MSI frames
2. Fixes the incorrect GICv2m frame size(64kB instead of 4kB)
* tag 'juno-updates-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: fix size of GICv2m MSI frames
arm64: dts: juno: Describe the full GICv2m region
|
|
'linux,stdout-path' has been deprecated for some time in favor of
'stdout-path'. Now dtc will warn on occurrences of 'linux,stdout-path'.
Search and replace the one occurrence with 'stdout-path'.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
'linux,stdout-path' has been deprecated for some time in favor of
'stdout-path'. Now dtc will warn on occurrences of 'linux,stdout-path'.
Search and replace all the of occurrences with 'stdout-path'.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Spreadtrum SC9860 platform has one SC2731 PMIC, and the SC2731
PMIC integrates all mobile handset power management, audio codec,
battery management and user interface support function in a single
chip.
This patch adds the SC2731 dts file, as well as adding the RTC and
regulator device node for this PMIC.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Spreadtrum SC9860 platform has two DMA controllers, one is located
on the ap-ahb system, and another one is located on the agcp system.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add the watchdog device node for Spreadtrum SC9860 platform to
watch the system's stability.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We will use one always-on timer to be the broadcast device, thus add
the timer device node for Spreadtrum SC9860 platform.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch adds the pin controller device node for Spreadtrum
SC9860 platform.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We will access the PMIC through ADI controller, thus this patch adds
the ADI device node for Spreadtrum SC9860 platform.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Spreadtrum SC9860 platform only has one hardware spinlock device,
which is located on AON system of Spreadtrum SC9860 platform.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt
Pull "DaVinci DT support enhancements for v4.17" from Sekhar Nori:
* Lego EV3 gains firmware recovery mode support
* Miscellaneous non-critical clean-up
* tag 'davinci-for-v4.17/dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-evm: add chosen and SPI alias
ARM: dts: da850-lego-ev3: use a correct fallback for at24 compatible
ARM: dts: da850-lego-ev3: Add node for reboot modes
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/dt
Pull "STi dts update" from Patrice Chotard:
Fix all DT dtc warnings when building with W=1
For most of implicated node, the addition of a fake reg property
fixes these warnings.
For others nodes, their location in device tree
have been updated.
* tag 'sti-dt-for-v4.17-round1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: dts: STi: Remove unused clk_ext2f_a9 clock
ARM: dts: STi: Update clocks node location
ARM: dts: STi: Update sound related nodes location
ARM: dts: STi: Add fake reg property for usb2_picophyX nodes
ARM: dts: STi: Add fake reg for restart, powerdown and picophy/softreset
ARM: dts: STi: Add fake reg property for remote processors
ARM: dts: STi: Add fake reg property for irq-syscfg
ARM: dts: STi: Add fake reg property for miphy28lp_phy
ARM: dts: STi: Add fake reg property for sti-display-subsystem
ARM: dts: STi: Move leds node outside soc node
ARM: dts: STi: Fix bindings notation
|
|
Add a common device tree for all Nuvoton NPCM750 BMCs and a board
specific device tree for the NPCM750 (Poleg) evaluation board.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Avi Fishman <avifishman70@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Tomer Maimon <tmaimon77@gmail.com>
Tested-by: Avi Fishman <avifishman70@gmail.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add node for the hardware crypto acceleration used in the artpec6 SoC.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The PCIe controller in the artpec6 SoC supports both root complex and
endpoint mode, however, the controller can only be used in one of the
modes.
Both pci nodes are disabled by default. A DTS file can enable one of
them, depending on what mode it wants to run.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add nodes for the nbpfaxi DMA controllers used in the artpec6 SoC,
and start using them for the exising UARTs.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add node for the pin controller used in the artpec6 SoC,
and start using it for the exising UARTs.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The snps,dwc-qos-ethernet binding is still supported as a glue layer
in the stmmac driver.
However, since the snps,dwc-qos-ethernet binding is now deprecated,
migrate to stmmac's native binding.
At the same time, enable features supported by the stmmac driver,
such as PTP, LPI, and an additional tx queue.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Remove 0x prefix from clkctrl unit address.
This silences the following dtc warning:
Warning (unit_address_format):
Node /clkctrl@0xf8000000 unit name should not have leading "0x"
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There has never been an artpec6 devboard produced
with less than 1 GiB RAM.
Increase the default value to 1 GiB RAM, so that we
can netboot with large initramfs without going OOM.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Accesses via 0x80000000 go through the ACP instead of using the DDR
directly.
Unfortunately the ACP has proven to be the cause of complete system
hangs. Disabling the ACP makes these problems go away.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The unit addresses on couple of serial nodes have a leading 0 resulting
in couple of warning messages around simple-bus unit address format
errors when compiled with W=1. Fix the same.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
Certain revisions of the TI EMIF IP contain ECC support in them. Reflect
this in the DT binding. Also, add interrupts property as a required
property for the emif controller, as all revisions of the emif IP contain
interrupt support; this might remain unused by the kernel driver though.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
Commit 95d8b41c765b ("ARM: dts: keystone-k2e-clocks: Add missing unit
name to clock nodes that have regs") fixed the unit names on various
clock nodes but missed out adding the unit address separator on the
clkhyperlink0 clock node. Fix the same.
Fixes: 95d8b41c765b ("ARM: dts: keystone-k2e-clocks: Add missing unit name to clock nodes that have regs")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
The two usb-phy nodes are not memory-mapped devices on the
SoC but rather dummy phys for SoCs with transparent autonomous
NOP phys. Move these to outside soc0 to their own node like
done elsewhere.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
The keystone_irq node describes a device that is a member of the device
state control module address space. As such, it should not be a member
of soc0 bus but instead a sub-node of device-state-control.
This move also fixes a warning about not having a reg property. Now
that this is a sub-node of device-state-control, a syscon type node,
we add this reg property but relative to the syscon base, this way
when the dt-binding/driver are updated we can drop the non-standard
gpio,syscon-dev property completely and simply use get_resource() in
the driver.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
The keystone_irq node describes a device that is a member of the device
state control module address space. As such, it should not be a member
of soc0 bus but instead a sub-node of device-state-control.
This move also fixes a warning about not having a reg property. Now
that this is a sub-node of device-state-control, a syscon type node,
we add this reg property but relative to the syscon base, this way
when the dt-binding/driver are updated we can drop the non-standard
ti,syscon-dev property completely and simply use get_resource() in
the driver.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
The keystone_irq node describes a device that is a member of the device
state control module address space. As such, it should not be a member
of soc0 bus but instead a sub-node of device-state-control.
This move also fixes warnings about not having a reg property. Now
that this is a sub-node of device-state-control, a syscon type node,
we add this reg property but relative to the syscon base, this way
when the dt-binding/driver are updated we can drop the non-standard
gpio,syscon-dev property completely and simply use get_resource() in
the driver.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
The keystone_irq node describes a device that is a member of the device
state control module address space. As such, it should not be a member
of soc0 bus but instead a sub-node of device-state-control.
This move also fixes warnings about not having a reg property. Now
that this is a sub-node of device-state-control, a syscon type node,
we add this reg property but relative to the syscon base, this way
when the dt-binding/driver are updated we can drop the non-standard
gpio,syscon-dev property completely and simply use get_resource() in
the driver.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
The keystone_irq node describes a device that is a member of the device
state control module address space. As such, it should not be a member
of soc0 bus but instead a sub-node of device-state-control.
This move also fixes a warning about not having a reg property. Now
that this is a sub-node of device-state-control, a syscon type node,
we add this reg property but relative to the syscon base, this way
when the dt-binding/driver are updated we can drop the non-standard
gpio,syscon-dev property completely and simply use get_resource() in
the driver.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
The keystone_irq node describes a device that is a member of the device
state control module address space. As such, it should not be a member
of soc0 bus but instead a sub-node of device-state-control.
This move also fixes a warning about not having a reg property. Now
that this is a sub-node of device-state-control, a syscon type node,
we add this reg property but relative to the syscon base, this way
when the dt-binding/driver are updated we can drop the non-standard
ti,syscon-dev property completely and simply use get_resource() in
the driver.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
The keystone_irq node describes a device that is a member of the device
state control module address space. As such, it should not be a member
of soc0 bus but instead a sub-node of device-state-control.
This move also fixes a warning about not having a reg property. Now
that this is a sub-node of device-state-control, a syscon type node,
we add this reg property but relative to the syscon base, this way
when the dt-binding/driver are updated we can drop the non-standard
ti,syscon-dev property completely and simply use get_resource() in
the driver.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of fixes for x86:
- Add missing instruction suffixes to assembly code so it can be
compiled by newer GAS versions without warnings.
- Switch refcount WARN exceptions to UD2 as we did in general
- Make the reboot on Intel Edison platforms work
- A small documentation update so text and sample command match"
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation, x86, resctrl: Make text and sample command match
x86/platform/intel-mid: Handle Intel Edison reboot correctly
x86/asm: Add instruction suffixes to bitops
x86/entry/64: Add instruction suffix
x86/refcounts: Switch to UD2 for exceptions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/pti fixes from Thomas Gleixner:
"Three fixes related to melted spectrum:
- Sync the cpu_entry_area page table to initial_page_table on 32 bit.
Otherwise suspend/resume fails because resume uses
initial_page_table and triggers a triple fault when accessing the
cpu entry area.
- Zero the SPEC_CTL MRS on XEN before suspend to address a
shortcoming in the hypervisor.
- Fix another switch table detection issue in objtool"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table
objtool: Fix another switch table detection issue
x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A small set of fixes from the timer departement:
- Add a missing timer wheel clock forward when migrating timers off a
unplugged CPU to prevent operating on a stale clock base and
missing timer deadlines.
- Use the proper shift count to extract data from a register value to
prevent evaluating unrelated bits
- Make the error return check in the FSL timer driver work correctly.
Checking an unsigned variable for less than zero does not really
work well.
- Clarify the confusing comments in the ARC timer code"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Forward timer base before migrating timers
clocksource/drivers/arc_timer: Update some comments
clocksource/drivers/mips-gic-timer: Use correct shift count to extract data
clocksource/drivers/fsl_ftm_timer: Fix error return checking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixlet from Thomas Gleixner:
"Just a documentation update for the missing device tree property of
the R-Car M3N interrupt controller"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
dt-bindings/irqchip/renesas-irqc: Document R-Car M3-N support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- when NR_CPUS is large, a SRCU structure can significantly inflate
size of the main filesystem structure that would not be possible to
allocate by kmalloc, so the kvalloc fallback is used
- improved error handling
- fix endiannes when printing some filesystem attributes via sysfs,
this is could happen when a filesystem is moved between different
endianity hosts
- send fixes: the NO_HOLE mode should not send a write operation for a
file hole
- fix log replay for for special files followed by file hardlinks
- fix log replay failure after unlink and link combination
- fix max chunk size calculation for DUP allocation
* tag 'for-4.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix log replay failure after unlink and link combination
Btrfs: fix log replay failure after linking special file and fsync
Btrfs: send, fix issuing write op when processing hole in no data mode
btrfs: use proper endianness accessors for super_copy
btrfs: alloc_chunk: fix DUP stripe size handling
btrfs: Handle btrfs_set_extent_delalloc failure in relocate_file_extent_cluster
btrfs: handle failure of add_pending_csums
btrfs: use kvzalloc to allocate btrfs_fs_info
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A driver fix and a documentation fix (which makes dependency handling
for the next cycle easier)"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: octeon: Prevent error message on bus error
dt-bindings: at24: sort manufacturers alphabetically
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A 4.16 regression fix, three fixes for -stable, and a cleanup fix:
- During the merge window support for the new ACPI NVDIMM Platform
Capabilities structure disabled support for "deep flush", a
force-unit- access like mechanism for persistent memory. Restore
that mechanism.
- VFIO like RDMA is yet one more memory registration / pinning
interface that is incompatible with Filesystem-DAX. Disable long
term pins of Filesystem-DAX mappings via VFIO.
- The Filesystem-DAX detection to prevent long terms pins mistakenly
also disabled Device-DAX pins which are not subject to the same
block- map collision concerns.
- Similar to the setup path, softlockup warnings can trigger in the
shutdown path for large persistent memory namespaces. Teach
for_each_device_pfn() to perform cond_resched() in all cases.
- Boaz noticed that the might_sleep() in dax_direct_access() is stale
as of the v4.15 kernel.
These have received a build success notification from the 0day robot,
and the longterm pin fixes have appeared in -next. However, I recently
rebased the tree to remove some other fixes that need to be reworked
after review feedback.
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
memremap: fix softlockup reports at teardown
libnvdimm: re-enable deep flush for pmem devices via fsync()
vfio: disable filesystem-dax page pinning
dax: fix vma_is_fsdax() helper
dax: ->direct_access does not sleep anymore
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- suppress sparse warnings about unknown attributes
- fix typos and stale comments
- fix build error of arch/sh
- fix wrong use of ld-option vs cc-ldoption
- remove redundant GCC_PLUGINS_CFLAGS assignment
- fix another memory leak of Kconfig
- fix line number in error messages of Kconfig
- do not write confusing CONFIG_DEFCONFIG_LIST out to .config
- add xstrdup() to Kconfig to handle memory shortage errors
- show also a Debian package name if ncurses is missing
* tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
MAINTAINERS: take over Kconfig maintainership
kconfig: fix line number in recursive inclusion error message
Coccinelle: memdup: Fix typo in warning messages
kconfig: Update ncurses package names for menuconfig
kbuild/kallsyms: trivial typo fix
kbuild: test --build-id linker flag by ld-option instead of cc-ldoption
kbuild: drop superfluous GCC_PLUGINS_CFLAGS assignment
kconfig: Don't leak choice names during parsing
sh: fix build error for empty CONFIG_BUILTIN_DTB_SOURCE
kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_list
kconfig: add xstrdup() helper
kbuild: disable sparse warnings about unknown attributes
Makefile: Fix lying comment re. silentoldconfig
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- some build fixes with randconfigs
- an m88ds3103 fix to prevent an OOPS if the chip doesn't provide the
right version during probe (with can happen if the hardware hangs)
- a potential out of array bounds reference in tvp5150
- some fixes and improvements in the DVB memory mapped API (added for
kernel 4.16)
* tag 'media/v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: vb2: Makefile: place vb2-trace together with vb2-core
media: Don't let tvp5150_get_vbi() go out of vbi_ram_default array
media: dvb: update buffer mmaped flags and frame counter
media: dvb: add continuity error indicators for memory mapped buffers
media: dmxdev: Fix the logic that enables DMA mmap support
media: dmxdev: fix error code for invalid ioctls
media: m88ds3103: don't call a non-initalized function
media: au0828: add VIDEO_V4L2 dependency
media: dvb: fix DVB_MMAP dependency
media: dvb: fix DVB_MMAP symbol name
media: videobuf2: fix build issues with vb2-trace
media: videobuf2: Add VIDEOBUF2_V4L2 Kconfig option for VB2 V4L2 part
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
- rave-sp: add NVMEM dependency
- build fixes for i6300esb_wdt, xen_wdt and sp5100_tco
* tag 'linux-watchdog-4.16-fixes-1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: sp5100_tco.c: fix potential build failure
watchdog: xen_wdt: fix potential build failure
watchdog: i6300esb: fix build failure
watchdog: rave-sp: add NVMEM dependency
|
|
Pull KVM fixes from Radim Krčmář:
"x86:
- fix NULL dereference when using userspace lapic
- optimize spectre v1 mitigations by allowing guests to use LFENCE
- make microcode revision configurable to prevent guests from
unnecessarily blacklisting spectre v2 mitigation feature"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: fix vcpu initialization with userspace lapic
KVM: X86: Allow userspace to define the microcode version
KVM: X86: Introduce kvm_get_msr_feature()
KVM: SVM: Add MSR-based feature support for serializing LFENCE
KVM: x86: Add a framework for supporting MSR-based features
|
|
The cond_resched() currently in the setup path needs to be duplicated in
the teardown path. Rather than require each instance of
for_each_device_pfn() to open code the same sequence, embed it in the
helper.
Link: https://github.com/intel/ixpdimm_sw/issues/11
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Fixes: 71389703839e ("mm, zone_device: Replace {get, put}_zone_device_page()...")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Re-enable deep flush so that users always have a way to be sure that a
write makes it all the way out to media. Writes from the PMEM driver
always arrive at the NVDIMM since movnt is used to bypass the cache, and
the driver relies on the ADR (Asynchronous DRAM Refresh) mechanism to
flush write buffers on power failure. The Deep Flush mechanism is there
to explicitly write buffers to protect against (rare) ADR failure. This
change prevents a regression in deep flush behavior so that applications
can continue to depend on fsync() as a mechanism to trigger deep flush
in the filesystem-DAX case.
Fixes: 06e8ccdab15f4 ("acpi: nfit: Add support for detect platform CPU cache...")
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
I have recently picked up Kconfig patches to my tree without any
declaration. Making it official now.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
|
