summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-10-19selftests: bridge_igmp: Remove unnecessary address deletionIdo Schimmel
The test group address is added and removed in v2reportleave_test(). There is no need to delete it again during cleanup as it results in the following error message: # bash -x ./bridge_igmp.sh [...] + cleanup + pre_cleanup [...] + ip address del dev swp4 239.10.10.10/32 RTNETLINK answers: Cannot assign requested address + h2_destroy Solve by removing the unnecessary address deletion. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19selftests: bridge_vlan_mcast: Delete qdiscs during cleanupIdo Schimmel
The qdiscs are added during setup, but not deleted during cleanup, resulting in the following error messages: # ./bridge_vlan_mcast.sh [...] # ./bridge_vlan_mcast.sh Error: Exclusivity flag on, cannot modify. Error: Exclusivity flag on, cannot modify. Solve by deleting the qdiscs during cleanup. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19Merge branch 'qdisc-null-deref'David S. Miller
Zhengchao Shao says: ==================== net: fix null pointer access issue in qdisc These three patches fix the same type of problem. Set the default qdisc, and then construct an init failure scenario when the dev qdisc is configured on mqprio to trigger the reset process. NULL pointer access may occur during the reset process. --- v2: for fq_codel, revert the patch --- ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19net: sched: sfb: fix null pointer access issue when sfb_init() failsZhengchao Shao
When the default qdisc is sfb, if the qdisc of dev_queue fails to be inited during mqprio_init(), sfb_reset() is invoked to clear resources. In this case, the q->qdisc is NULL, and it will cause gpf issue. The process is as follows: qdisc_create_dflt() sfb_init() tcf_block_get() --->failed, q->qdisc is NULL ... qdisc_put() ... sfb_reset() qdisc_reset(q->qdisc) --->q->qdisc is NULL ops = qdisc->ops The following is the Call Trace information: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] RIP: 0010:qdisc_reset+0x2b/0x6f0 Call Trace: <TASK> sfb_reset+0x37/0xd0 qdisc_reset+0xed/0x6f0 qdisc_destroy+0x82/0x4c0 qdisc_put+0x9e/0xb0 qdisc_create_dflt+0x2c3/0x4a0 mqprio_init+0xa71/0x1760 qdisc_create+0x3eb/0x1000 tc_modify_qdisc+0x408/0x1720 rtnetlink_rcv_msg+0x38e/0xac0 netlink_rcv_skb+0x12d/0x3a0 netlink_unicast+0x4a2/0x740 netlink_sendmsg+0x826/0xcc0 sock_sendmsg+0xc5/0x100 ____sys_sendmsg+0x583/0x690 ___sys_sendmsg+0xe8/0x160 __sys_sendmsg+0xbf/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f2164122d04 </TASK> Fixes: e13e02a3c68d ("net_sched: SFB flow scheduler") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19Revert "net: sched: fq_codel: remove redundant resource cleanup in ↵Zhengchao Shao
fq_codel_init()" This reverts commit 494f5063b86cd6e972cb41a27e083c9a3664319d. When the default qdisc is fq_codel, if the qdisc of dev_queue fails to be inited during mqprio_init(), fq_codel_reset() is invoked to clear resources. In this case, the flow is NULL, and it will cause gpf issue. The process is as follows: qdisc_create_dflt() fq_codel_init() ... q->flows_cnt = 1024; ... q->flows = kvcalloc(...) --->failed, q->flows is NULL ... qdisc_put() ... fq_codel_reset() ... flow = q->flows + i --->q->flows is NULL The following is the Call Trace information: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:fq_codel_reset+0x14d/0x350 Call Trace: <TASK> qdisc_reset+0xed/0x6f0 qdisc_destroy+0x82/0x4c0 qdisc_put+0x9e/0xb0 qdisc_create_dflt+0x2c3/0x4a0 mqprio_init+0xa71/0x1760 qdisc_create+0x3eb/0x1000 tc_modify_qdisc+0x408/0x1720 rtnetlink_rcv_msg+0x38e/0xac0 netlink_rcv_skb+0x12d/0x3a0 netlink_unicast+0x4a2/0x740 netlink_sendmsg+0x826/0xcc0 sock_sendmsg+0xc5/0x100 ____sys_sendmsg+0x583/0x690 ___sys_sendmsg+0xe8/0x160 __sys_sendmsg+0xbf/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fd272b22d04 </TASK> Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19net: sched: cake: fix null pointer access issue when cake_init() failsZhengchao Shao
When the default qdisc is cake, if the qdisc of dev_queue fails to be inited during mqprio_init(), cake_reset() is invoked to clear resources. In this case, the tins is NULL, and it will cause gpf issue. The process is as follows: qdisc_create_dflt() cake_init() q->tins = kvcalloc(...) --->failed, q->tins is NULL ... qdisc_put() ... cake_reset() ... cake_dequeue_one() b = &q->tins[...] --->q->tins is NULL The following is the Call Trace information: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:cake_dequeue_one+0xc9/0x3c0 Call Trace: <TASK> cake_reset+0xb1/0x140 qdisc_reset+0xed/0x6f0 qdisc_destroy+0x82/0x4c0 qdisc_put+0x9e/0xb0 qdisc_create_dflt+0x2c3/0x4a0 mqprio_init+0xa71/0x1760 qdisc_create+0x3eb/0x1000 tc_modify_qdisc+0x408/0x1720 rtnetlink_rcv_msg+0x38e/0xac0 netlink_rcv_skb+0x12d/0x3a0 netlink_unicast+0x4a2/0x740 netlink_sendmsg+0x826/0xcc0 sock_sendmsg+0xc5/0x100 ____sys_sendmsg+0x583/0x690 ___sys_sendmsg+0xe8/0x160 __sys_sendmsg+0xbf/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f89e5122d04 </TASK> Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19ethernet: marvell: octeontx2 Fix resource not freed after mallocManank Patel
fix rxsc and txsc not getting freed before going out of scope Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Manank Patel <pmanank200502@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19Merge branch 'dpaa-phylink'David S. Miller
Sean Anderson says: ==================== net: dpaa: Convert to phylink This series converts the DPAA driver to phylink. I have tried to maintain backwards compatibility with existing device trees whereever possible. However, one area where I was unable to achieve this was with QSGMII. Please refer to patch 2 for details. All mac drivers have now been converted. I would greatly appreciate if anyone has T-series or P-series boards they can test/debug this series on. I only have an LS1046ARDB. Everything but QSGMII should work without breakage; QSGMII needs patches 7 and 8. For this reason, the last 4 patches in this series should be applied together (and should not go through separate trees). Changes in v7: - provide phylink_validate_mask_caps() helper - Fix oops if memac_pcs_create returned -EPROBE_DEFER - Fix using pcs-names instead of pcs-handle-names - Fix not checking for -ENODATA when looking for sgmii pcs - Fix 81-character line - Simplify memac_validate with phylink_validate_mask_caps Changes in v6: - Remove unnecessary $ref from renesas,rzn1-a5psw - Remove unnecessary type from pcs-handle-names - Add maxItems to pcs-handle - Fix 81-character line - Fix uninitialized variable in dtsec_mac_config Changes in v5: - Add Lynx PCS binding Changes in v4: - Use pcs-handle-names instead of pcs-names, as discussed - Don't fail if phy support was not compiled in - Split off rate adaptation series - Split off DPAA "preparation" series - Split off Lynx 10G support - t208x: Mark MAC1 and MAC2 as 10G - Add XFI PCS for t208x MAC1/MAC2 Changes in v3: - Expand pcs-handle to an array - Add vendor prefix 'fsl,' to rgmii and mii properties. - Set maxItems for pcs-names - Remove phy-* properties from example because dt-schema complains and I can't be bothered to figure out how to make it work. - Add pcs-handle as a preferred version of pcsphy-handle - Deprecate pcsphy-handle - Remove mii/rmii properties - Put the PCS mdiodev only after we are done with it (since the PCS does not perform a get itself). - Remove _return label from memac_initialization in favor of returning directly - Fix grabbing the default PCS not checking for -ENODATA from of_property_match_string - Set DTSEC_ECNTRL_R100M in dtsec_link_up instead of dtsec_mac_config - Remove rmii/mii properties - Replace 1000Base... with 1000BASE... to match IEEE capitalization - Add compatibles for QSGMII PCSs - Split arm and powerpcs dts updates Changes in v2: - Better document how we select which PCS to use in the default case - Move PCS_LYNX dependency to fman Kconfig - Remove unused variable slow_10g_if - Restrict valid link modes based on the phy interface. This is easier to set up, and mostly captures what I intended to do the first time. We now have a custom validate which restricts half-duplex for some SoCs for RGMII, but generally just uses the default phylink validate. - Configure the SerDes in enable/disable - Properly implement all ethtool ops and ioctls. These were mostly stubbed out just enough to compile last time. - Convert 10GEC and dTSEC as well - Fix capitalization of mEMAC in commit messages - Add nodes for QSGMII PCSs - Add nodes for QSGMII PCSs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19arm64: dts: layerscape: Add nodes for QSGMII PCSsSean Anderson
Now that we actually read registers from QSGMII PCSs, it's important that we have the correct address (instead of hoping that we're the MAC with all the QSGMII PCSs on its bus). This adds nodes for the QSGMII PCSs. The exact mapping of QSGMII to MACs depends on the SoC. Since the first QSGMII PCSs share an address with the SGMII and XFI PCSs, we only add new nodes for PCSs 2-4. This avoids address conflicts on the bus. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19powerpc: dts: qoriq: Add nodes for QSGMII PCSsSean Anderson
Now that we actually read registers from QSGMII PCSs, it's important that we have the correct address (instead of hoping that we're the MAC with all the QSGMII PCSs on its bus). This adds nodes for the QSGMII PCSs. They have the same addresses on all SoCs (e.g. if QSGMIIA is present it's used for MACs 1 through 4). Since the first QSGMII PCSs share an address with the SGMII and XFI PCSs, we only add new nodes for PCSs 2-4. This avoids address conflicts on the bus. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19powerpc: dts: t208x: Mark MAC1 and MAC2 as 10GSean Anderson
On the T208X SoCs, MAC1 and MAC2 support XGMII. Add some new MAC dtsi fragments, and mark the QMAN ports as 10G. Fixes: da414bb923d9 ("powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s)") Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19net: dpaa: Convert to phylinkSean Anderson
This converts DPAA to phylink. All macs are converted. This should work with no device tree modifications (including those made in this series), except for QSGMII (as noted previously). The mEMAC configuration is one of the tricker areas. I have tried to capture all the restrictions across the various models. Most of the time, we assume that if the serdes supports a mode or the phy-interface-mode specifies it, then we support it. The only place we can't do this is (RG)MII, since there's no serdes. In that case, we rely on a (new) devicetree property. There are also several cases where half-duplex is broken. Unfortunately, only a single compatible is used for the MAC, so we have to use the board compatible instead. The 10GEC conversion is very straightforward, since it only supports XAUI. There is generally nothing to configure. The dTSEC conversion is broadly similar to mEMAC, but is simpler because we don't support configuring the SerDes (though this can be easily added) and we don't have multiple PCSs. From what I can tell, there's nothing different in the driver or documentation between SGMII and 1000BASE-X except for the advertising. Similarly, I couldn't find anything about 2500BASE-X. In both cases, I treat them like SGMII. These modes aren't used by any in-tree boards. Similarly, despite being mentioned in the driver, I couldn't find any documented SoCs which supported QSGMII. I have left it unimplemented for now. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19net: fman: memac: Use lynx pcs driverSean Anderson
Although not stated in the datasheet, as far as I can tell PCS for mEMACs is a "Lynx." By reusing the existing driver, we can remove the PCS management code from the memac driver. This requires calling some PCS functions manually which phylink would usually do for us, but we will let it do that soon. One problem is that we don't actually have a PCS for QSGMII. We pretend that each mEMAC's MDIO bus has four QSGMII PCSs, but this is not the case. Only the "base" mEMAC's MDIO bus has the four QSGMII PCSs. This is not an issue yet, because we never get the PCS state. However, it will be once the conversion to phylink is complete, since the links will appear to never come up. To get around this, we allow specifying multiple PCSs in pcsphy. This breaks backwards compatibility with old device trees, but only for QSGMII. IMO this is the only reasonable way to figure out what the actual QSGMII PCS is. Additionally, we now also support a separate XFI PCS. This can allow the SerDes driver to set different addresses for the SGMII and XFI PCSs so they can be accessed at the same time. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19net: fman: memac: Add serdes supportSean Anderson
This adds support for using a serdes which has to be configured. This is primarly in preparation for phylink conversion, which will then change the serdes mode dynamically. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19net: phylink: provide phylink_validate_mask_caps() helperRussell King (Oracle)
Provide a helper that restricts the link modes according to the phylink capabilities. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [rebased on net-next/master and added documentation] Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19dt-bindings: net: fman: Add additional interface propertiesSean Anderson
At the moment, mEMACs are configured almost completely based on the phy-connection-type. That is, if the phy interface is RGMII, it assumed that RGMII is supported. For some interfaces, it is assumed that the RCW/bootloader has set up the SerDes properly. This is generally OK, but restricts runtime reconfiguration. The actual link state is never reported. To address these shortcomings, the driver will need additional information. First, it needs to know how to access the PCS/PMAs (in order to configure them and get the link status). The SGMII PCS/PMA is the only currently-described PCS/PMA. Add the XFI and QSGMII PCS/PMAs as well. The XFI (and 10GBASE-KR) PCS/PMA is a c45 "phy" which sits on the same MDIO bus as SGMII PCS/PMA. By default they will have conflicting addresses, but they are also not enabled at the same time by default. Therefore, we can let the XFI PCS/PMA be the default when phy-connection-type is xgmii. This will allow for backwards-compatibility. QSGMII, however, cannot work with the current binding. This is because the QSGMII PCS/PMAs are only present on one MAC's MDIO bus. At the moment this is worked around by having every MAC write to the PCS/PMA addresses (without checking if they are present). This only works if each MAC has the same configuration, and only if we don't need to know the status. Because the QSGMII PCS/PMA will typically be located on a different MDIO bus than the MAC's SGMII PCS/PMA, there is no fallback for the QSGMII PCS/PMA. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19dt-bindings: net: Add Lynx PCS bindingSean Anderson
This binding is fairly bare-bones for now, since the Lynx driver doesn't parse any properties (or match based on the compatible). We just need it in order to prevent the PCS nodes from having phy devices attached to them. This is not really a problem, but it is a bit inefficient. This binding is really for three separate PCSs (SGMII, QSGMII, and XFI). However, the driver treats all of them the same. This works because the SGMII and XFI devices typically use the same address, and the SerDes driver (or RCW) muxes between them. The QSGMII PCSs have the same register layout as the SGMII PCSs. To do things properly, we'd probably do something like ethernet-pcs@0 { #pcs-cells = <1>; compatible = "fsl,lynx-pcs"; reg = <0>, <1>, <2>, <3>; }; but that would add complexity, and we can describe the hardware just fine using separate PCSs for now. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19dt-bindings: net: Expand pcs-handle to an arraySean Anderson
This allows multiple phandles to be specified for pcs-handle, such as when multiple PCSs are present for a single MAC. To differentiate between them, also add a pcs-handle-names property. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19Merge branch 'net-marvell-yaml'David S. Miller
Michał Grzelak says: ==================== net: further improvements to marvell,pp2.yaml This patchset addresses problems with reg ranges and additional $refs. It also limits phy-mode and aligns examples. Best regards, Michał --- Changelog: v4->v5 - drop '+' from all patternProperties - restrict range of patternProperties to [0-2] in top level - drop the $ref in patternProperties:'^...':properties:reg - add patternProperties:'^...':properties:reg:maximum:2 - drop $ref in patternProperties:'^...':properties:phys - add patternProperties:'^...':properties:phys:maxItems:1 - limit phy-mode to the subset found in dts files - reflect the order of subnodes' properties in subnodes' required: - restrict range of pattern to [0-2] in marvell,armada-7k-pp22 case - restrict range of pattern to [0-1] in marvell,armada-375-pp2 case - align to 4 spaces all examples: - add specified maximum to allOf:if:then-else:properties:reg v3->v4 - change commit message of first patch - move allOf:$ref to patternProperties:'^...':$ref - deprecate port-id in favour of reg - move reg to front of properties list in patternProperties - reflect the order of properties in required list in patternProperties - add unevaluatedProperties: false to patternProperties - change unevaluated- to additionalProperties at top level - add property phys: to ports subnode - extend example binding with additional information about phys and sfp - hook phys property to phy-consumer.yaml schema v2->v3 - move 'reg:description' to 'allOf:if:then' - change '#size-cells: true' and '#address-cells: true' to '#size-cells: const: 0' and '#address-cells: const: 1' - replace all occurences of pattern "^eth\{hex_num}*" with "^(ethernet-)?port@[0-9]+$" - add description in 'patternProperties:^...' - add 'patternProperties:^...:interrupt-names:minItems: 1' - add 'patternProperties:^...:reg:description' - update 'patternProperties:^...:port-id:description' - add 'patternProperties:^...:required: - reg' - update '*:description:' to uppercase - add 'allOf:then:required:marvell,system-controller' - skip quotation marks from 'allOf:$ref' - add 'else' schema to match 'allOf:if:then' - restrict 'clocks' in 'allOf:if:then' - restrict 'clock-names' in 'allOf:if:then' - add #address-cells=<1>; #size-cells=<0>; in 'examples:' - change every "ethX" to "ethernet-port@X" in 'examples:' - add "reg" and comment in all ports in 'examples:' - change /ethernet/eth0/phy-mode in examples://Armada-375 to "rgmii-id" - replace each cpm_ with cp0_ in 'examples:' - replace each _syscon0 with _clk0 in 'examples:' - remove each eth0X label in 'examples:' - update armada-375.dtsi and armada-cp11x.dtsi to match marvell,pp2.yaml v1->v2 - move 'properties' to the front of the file - remove blank line after 'properties' - move 'compatible' to the front of 'properties' - move 'clocks', 'clock-names' and 'reg' definitions to 'properties' - substitute all occurences of 'marvell,armada-7k-pp2' with 'marvell,armada-7k-pp22' - add properties:#size-cells and properties:#address-cells - specify list in 'interrupt-names' - remove blank lines after 'patternProperties' - remove '^interrupt' and '^#.*-cells$' patterns - remove blank line after 'allOf' - remove first 'if-then-else' block from 'allOf' - negate the condition in allOf:if schema - delete 'interrupt-controller' from section 'examples' - delete '#interrupt-cells' from section 'examples' ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19ARM: dts: armada-375: Update network description to match schemaMarcin Wojtas
Update the PP2 ethernet ports subnodes' names to match schema enforced by the marvell,pp2.yaml contents. Add new required properties ('reg') which contains information about the port ID, keeping 'port-id' ones for backward compatibility. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19arm64: dts: marvell: Update network description to match schemaMarcin Wojtas
Update the PP2 ethernet ports subnodes' names to match schema enforced by the marvell,pp2.yaml contents. Add new required properties ('reg') which contains information about the port ID, keeping 'port-id' ones for backward compatibility. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19dt-bindings: net: marvell,pp2: convert to json-schemaMichał Grzelak
Convert the marvell,pp2 bindings from text to proper schema. Move 'marvell,system-controller' and 'dma-coherent' properties from port up to the controller node, to match what is actually done in DT. Rename all subnodes to match "^(ethernet-)?port@[0-2]$" and deprecate port-id in favour of 'reg'. Signed-off-by: Michał Grzelak <mig@semihalf.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-19netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirementsPablo Neira Ayuso
Otherwise EINVAL is bogusly reported to userspace when deleting a set element. NFTA_SET_ELEM_KEY_END does not need to be set in case of: - insertion: if not present, start key is used as end key. - deletion: only start key needs to be specified, end key is ignored. Hence, relax the sanity check. Fixes: 88cccd908d51 ("netfilter: nf_tables: NFTA_SET_ELEM_KEY_END requires concat and interval flags") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-19netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces.Guillaume Nault
Currently netfilter's rpfilter and fib modules implicitely initialise ->flowic_uid with 0. This is normally the root UID. However, this isn't the case in user namespaces, where user ID 0 is mapped to a different kernel UID. By initialising ->flowic_uid with sock_net_uid(), we get the root UID of the user namespace, thus keeping the same behaviour whether or not we're running in a user namepspace. Note, this is similar to commit 8bcfd0925ef1 ("ipv4: add missing initialization for flowi4_uid"), which fixed the rp_filter sysctl. Fixes: 622ec2c9d524 ("net: core: add UID to flows, rules, and routes") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-18enic: define constants for legacy interrupts offsetGovindarajulu Varadarajan
Use macro instead of function calls. These values are constant and will not change. Signed-off-by: Govindarajulu Varadarajan <govind.varadar@gmail.com> Link: https://lore.kernel.org/r/20221018005804.188643-1-govind.varadar@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-18net: fec: remove the unused functionsShenwei Wang
Removed those unused functions since we simplified the driver by using the page pool to manage RX buffers. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20221017161236.1563975-1-shenwei.wang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-18net: remove smc911x driverArnd Bergmann
This driver was used on Arm and SH machines until 2009, when the last platforms moved to the smsc911x driver for the same hardware. Time to retire this version. Link: https://lore.kernel.org/netdev/1232010482-3744-1-git-send-email-steve.glendinning@smsc.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20221017121900.3520108-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-18ionic: catch NULL pointer issue on reconfigBrett Creeley
It's possible that the driver will dereference a qcq that doesn't exist when calling ionic_reconfigure_queues(), which causes a page fault BUG. If a reduction in the number of queues is followed by a different reconfig such as changing the ring size, the driver can hit a NULL pointer when trying to clean up non-existent queues. Fix this by checking to make sure both the qcqs array and qcq entry exists bofore trying to use and free the entry. Fixes: 101b40a0171f ("ionic: change queue count with no reset") Signed-off-by: Brett Creeley <brett@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20221017233123.15869-1-snelson@pensando.io Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-18net: hsr: avoid possible NULL deref in skb_clone()Eric Dumazet
syzbot got a crash [1] in skb_clone(), caused by a bug in hsr_get_untagged_frame(). When/if create_stripped_skb_hsr() returns NULL, we must not attempt to call skb_clone(). While we are at it, replace a WARN_ONCE() by netdev_warn_once(). [1] general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f] CPU: 1 PID: 754 Comm: syz-executor.0 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 RIP: 0010:skb_clone+0x108/0x3c0 net/core/skbuff.c:1641 Code: 93 02 00 00 49 83 7c 24 28 00 0f 85 e9 00 00 00 e8 5d 4a 29 fa 4c 8d 75 7e 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 4c 89 f2 83 e2 07 38 d0 7f 08 84 c0 0f 85 9e 01 00 00 RSP: 0018:ffffc90003ccf4e0 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffffc90003ccf5f8 RCX: ffffc9000c24b000 RDX: 000000000000000f RSI: ffffffff8751cb13 RDI: 0000000000000000 RBP: 0000000000000000 R08: 00000000000000f0 R09: 0000000000000140 R10: fffffbfff181d972 R11: 0000000000000000 R12: ffff888161fc3640 R13: 0000000000000a20 R14: 000000000000007e R15: ffffffff8dc5f620 FS: 00007feb621e4700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007feb621e3ff8 CR3: 00000001643a9000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> hsr_get_untagged_frame+0x4e/0x610 net/hsr/hsr_forward.c:164 hsr_forward_do net/hsr/hsr_forward.c:461 [inline] hsr_forward_skb+0xcca/0x1d50 net/hsr/hsr_forward.c:623 hsr_handle_frame+0x588/0x7c0 net/hsr/hsr_slave.c:69 __netif_receive_skb_core+0x9fe/0x38f0 net/core/dev.c:5379 __netif_receive_skb_one_core+0xae/0x180 net/core/dev.c:5483 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5599 netif_receive_skb_internal net/core/dev.c:5685 [inline] netif_receive_skb+0x12f/0x8d0 net/core/dev.c:5744 tun_rx_batched+0x4ab/0x7a0 drivers/net/tun.c:1544 tun_get_user+0x2686/0x3a00 drivers/net/tun.c:1995 tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2025 call_write_iter include/linux/fs.h:2187 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9e9/0xdd0 fs/read_write.c:584 ksys_write+0x127/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: f266a683a480 ("net/hsr: Better frame dispatch") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221017165928.2150130-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-18bnxt_en: fix memory leak in bnxt_nvm_test()Vikas Gupta
Free the kzalloc'ed buffer before returning in the success path. Fixes: 5b6ff128fdf6 ("bnxt_en: implement callbacks for devlink selftests") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1666020742-25834-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-18Merge tag 'for-netdev' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2022-10-18 We've added 33 non-merge commits during the last 14 day(s) which contain a total of 31 files changed, 874 insertions(+), 538 deletions(-). The main changes are: 1) Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs, from Hou Tao & Paul E. McKenney. 2) Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values. In the wild we have seen OS vendors doing buggy backports where helper call numbers mismatched. This is an attempt to make backports more foolproof, from Andrii Nakryiko. 3) Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions, from Roberto Sassu. 4) Fix libbpf's BTF dumper for structs with padding-only fields, from Eduard Zingerman. 5) Fix various libbpf bugs which have been found from fuzzing with malformed BPF object files, from Shung-Hsi Yu. 6) Clean up an unneeded check on existence of SSE2 in BPF x86-64 JIT, from Jie Meng. 7) Fix various ASAN bugs in both libbpf and selftests when running the BPF selftest suite on arm64, from Xu Kuohai. 8) Fix missing bpf_iter_vma_offset__destroy() call in BPF iter selftest and use in-skeleton link pointer to remove an explicit bpf_link__destroy(), from Jiri Olsa. 9) Fix BPF CI breakage by pointing to iptables-legacy instead of relying on symlinked iptables which got upgraded to iptables-nft, from Martin KaFai Lau. 10) Minor BPF selftest improvements all over the place, from various others. * tag 'for-netdev' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (33 commits) bpf/docs: Update README for most recent vmtest.sh bpf: Use rcu_trace_implies_rcu_gp() for program array freeing bpf: Use rcu_trace_implies_rcu_gp() in local storage map bpf: Use rcu_trace_implies_rcu_gp() in bpf memory allocator rcu-tasks: Provide rcu_trace_implies_rcu_gp() selftests/bpf: Use sys_pidfd_open() helper when possible libbpf: Fix null-pointer dereference in find_prog_by_sec_insn() libbpf: Deal with section with no data gracefully libbpf: Use elf_getshdrnum() instead of e_shnum selftest/bpf: Fix error usage of ASSERT_OK in xdp_adjust_tail.c selftests/bpf: Fix error failure of case test_xdp_adjust_tail_grow selftest/bpf: Fix memory leak in kprobe_multi_test selftests/bpf: Fix memory leak caused by not destroying skeleton libbpf: Fix memory leak in parse_usdt_arg() libbpf: Fix use-after-free in btf_dump_name_dups selftests/bpf: S/iptables/iptables-legacy/ in the bpf_nf and xdp_synproxy test selftests/bpf: Alphabetize DENYLISTs selftests/bpf: Add tests for _opts variants of bpf_*_get_fd_by_id() libbpf: Introduce bpf_link_get_fd_by_id_opts() libbpf: Introduce bpf_btf_get_fd_by_id_opts() ... ==================== Link: https://lore.kernel.org/r/20221018210631.11211-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-18dm clone: Fix typo in block_device format specifierNikos Tsironis
Use %pg for printing the block device name, instead of %pd. Fixes: 385411ffba0c ("dm: stop using bdevname") Cc: stable@vger.kernel.org # v5.18+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-10-18dm: remove unnecessary assignment statement in alloc_dev()Genjian Zhang
Fixes: 74fe6ba923949 ("dm: convert to blk_alloc_disk/blk_cleanup_disk") Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-10-18dm verity: Add documentation for try_verify_in_tasklet optionMilan Broz
Add documentation that was missing from commit 5721d4e5a9cd ("dm verity: Add optional "try_verify_in_tasklet" feature"). Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-10-18dm cache: delete the redundant word 'each' in commentShaomin Deng
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-10-18dm raid: fix typo in analyse_superblocks code commentJiangshan Yi
Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-10-18dm verity: enable WQ_HIGHPRI on verify_wqNathan Huckleberry
WQ_HIGHPRI increases throughput and decreases disk latency when using dm-verity. This is important in Android for camera startup speed. The following tests were run by doing 60 seconds of random reads using a dm-verity device backed by two ramdisks. Without WQ_HIGHPRI lat (usec): min=13, max=3947, avg=69.53, stdev=50.55 READ: bw=51.1MiB/s (53.6MB/s), 51.1MiB/s-51.1MiB/s (53.6MB/s-53.6MB/s) With WQ_HIGHPRI: lat (usec): min=13, max=7854, avg=31.15, stdev=30.42 READ: bw=116MiB/s (121MB/s), 116MiB/s-116MiB/s (121MB/s-121MB/s) Further testing was done by measuring how long it takes to open a camera on an Android device. Without WQ_HIGHPRI Total verity work queue wait times (ms): 880.960, 789.517, 898.852 With WQ_HIGHPRI: Total verity work queue wait times (ms): 528.824, 439.191, 433.300 The average time to open the camera is reduced by 350ms (or 40-50%). Signed-off-by: Nathan Huckleberry <nhuck@google.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-10-18dm raid: delete the redundant word 'that' in commentJilin Yuan
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-10-18dm: change from DMWARN to DMERR or DMCRIT for fatal errorsMikulas Patocka
Change DMWARN to DMERR in cases when there is an unrecoverable error. Change DMWARN to DMCRIT when handling of a case is unimplemented. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-10-18bpf/docs: Update README for most recent vmtest.shDaniel Müller
Since commit 40b09653b197 ("selftests/bpf: Adjust vmtest.sh to use local kernel configuration") the vmtest.sh script no longer downloads a kernel configuration but uses the local, in-repository one. This change updates the README, which still mentions the old behavior. Signed-off-by: Daniel Müller <deso@posteo.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20221017232458.1272762-1-deso@posteo.net
2022-10-18Merge tag 'for-6.1-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fiemap fixes: - add missing path cache update - fix processing of delayed data and tree refs during backref walking, this could lead to reporting incorrect extent sharing - fix extent range locking under heavy contention to avoid deadlocks - make it possible to test send v3 in debugging mode - update links in MAINTAINERS * tag 'for-6.1-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: MAINTAINERS: update btrfs website links and files btrfs: ignore fiemap path cache if we have multiple leaves for a data extent btrfs: fix processing of delayed tree block refs during backref walking btrfs: fix processing of delayed data refs during backref walking btrfs: delete stale comments after merge conflict resolution btrfs: unlock locked extent area if we have contention btrfs: send: update command for protocol version check btrfs: send: allow protocol version 3 with CONFIG_BTRFS_DEBUG btrfs: add missing path cache update during fiemap
2022-10-18Merge tag 'erofs-for-6.1-rc2-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fixes from Gao Xiang: - Fix invalid unmapped accesses when initializing compressed inodes - Fix up very rare hung on page lock after enabling compressed data deduplication - Fix up inplace decompression success rate - Take s_inode_list_lock to protect sb->s_inodes for fscache shared domain * tag 'erofs-for-6.1-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: protect s_inodes with s_inode_list_lock for fscache erofs: fix up inplace decompression success rate erofs: shouldn't churn the mapping page for duplicated copies erofs: fix illegal unmapped accesses in z_erofs_fill_inode_lazy()
2022-10-18Merge branch 'Remove unnecessary RCU grace period chaining'Alexei Starovoitov
Hou Tao says: ==================== Now bpf uses RCU grace period chaining to wait for the completion of access from both sleepable and non-sleepable bpf program: calling call_rcu_tasks_trace() firstly to wait for a RCU-tasks-trace grace period, then in its callback calls call_rcu() or kfree_rcu() to wait for a normal RCU grace period. According to the implementation of RCU Tasks Trace, it inovkes ->postscan_func() to wait for one RCU-tasks-trace grace period and rcu_tasks_trace_postscan() inovkes synchronize_rcu() to wait for one normal RCU grace period in turn, so one RCU-tasks-trace grace period will imply one normal RCU grace period. To codify the implication, introduces rcu_trace_implies_rcu_gp() in patch #1. And using it in patch Other two uses of call_rcu_tasks_trace() are unchanged: for __bpf_prog_put_rcu() there is no gp chain and for __bpf_tramp_image_put_rcu_tasks() it chains RCU tasks trace GP and RCU tasks GP. An alternative way to remove these unnecessary RCU grace period chainings is using the RCU polling API to check whether or not a normal RCU grace period has passed (e.g. get_state_synchronize_rcu()). But it needs an unsigned long space for each free element or each call, and it is not affordable for local storage element, so as for now always rcu_trace_implies_rcu_gp(). Comments are always welcome. Change Log: v2: * codify the implication of RCU Tasks Trace grace period instead of assuming for it v1: https://lore.kernel.org/bpf/20221011071128.3470622-1-houtao@huaweicloud.com Hou Tao (3): bpf: Use rcu_trace_implies_rcu_gp() in bpf memory allocator bpf: Use rcu_trace_implies_rcu_gp() in local storage map bpf: Use rcu_trace_implies_rcu_gp() for program array freeing ==================== Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-10-18bpf: Use rcu_trace_implies_rcu_gp() for program array freeingHou Tao
To support both sleepable and normal uprobe bpf program, the freeing of trace program array chains a RCU-tasks-trace grace period and a normal RCU grace period one after the other. With the introduction of rcu_trace_implies_rcu_gp(), __bpf_prog_array_free_sleepable_cb() can check whether or not a normal RCU grace period has also passed after a RCU-tasks-trace grace period has passed. If it is true, it is safe to invoke kfree() directly. Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20221014113946.965131-5-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-10-18bpf: Use rcu_trace_implies_rcu_gp() in local storage mapHou Tao
Local storage map is accessible for both sleepable and non-sleepable bpf program, and its memory is freed by using both call_rcu_tasks_trace() and kfree_rcu() to wait for both RCU-tasks-trace grace period and RCU grace period to pass. With the introduction of rcu_trace_implies_rcu_gp(), both bpf_selem_free_rcu() and bpf_local_storage_free_rcu() can check whether or not a normal RCU grace period has also passed after a RCU-tasks-trace grace period has passed. If it is true, it is safe to call kfree() directly. Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20221014113946.965131-4-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-10-18bpf: Use rcu_trace_implies_rcu_gp() in bpf memory allocatorHou Tao
The memory free logic in bpf memory allocator chains a RCU Tasks Trace grace period and a normal RCU grace period one after the other, so it can ensure that both sleepable and non-sleepable programs have finished. With the introduction of rcu_trace_implies_rcu_gp(), __free_rcu_tasks_trace() can check whether or not a normal RCU grace period has also passed after a RCU Tasks Trace grace period has passed. If it is true, freeing these elements directly, else freeing through call_rcu(). Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20221014113946.965131-3-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-10-18rcu-tasks: Provide rcu_trace_implies_rcu_gp()Paul E. McKenney
As an accident of implementation, an RCU Tasks Trace grace period also acts as an RCU grace period. However, this could change at any time. This commit therefore creates an rcu_trace_implies_rcu_gp() that currently returns true to codify this accident. Code relying on this accident must call this function to verify that this accident is still happening. Reported-by: Hou Tao <houtao@huaweicloud.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Martin KaFai Lau <martin.lau@linux.dev> Link: https://lore.kernel.org/r/20221014113946.965131-2-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-10-18dm bufio: use the acquire memory barrier when testing for B_READINGMikulas Patocka
The function test_bit doesn't provide any memory barrier. It may be possible that the read requests that follow test_bit(B_READING, &b->state) are reordered before the test, reading invalid data that existed before B_READING was cleared. Fix this bug by changing test_bit to test_bit_acquire. This is particularly important on arches with weak(er) memory ordering (e.g. arm64). Depends-On: 8238b4579866 ("wait_on_bit: add an acquire memory barrier") Depends-On: d6ffe6067a54 ("provide arch_test_bit_acquire for architectures that define test_bit") Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-10-18net: ip6_gre: Remove the unused function ip6gre_tnl_addr_conflict()Jiapeng Chong
The function ip6gre_tnl_addr_conflict() is defined in the ip6_gre.c file, but not called elsewhere, so delete this unused function. net/ipv6/ip6_gre.c:887:20: warning: unused function 'ip6gre_tnl_addr_conflict'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2419 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20221017093540.26806-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-18ip6mr: fix UAF issue in ip6mr_sk_done() when addrconf_init_net() failedZhengchao Shao
If the initialization fails in calling addrconf_init_net(), devconf_all is the pointer that has been released. Then ip6mr_sk_done() is called to release the net, accessing devconf->mc_forwarding directly causes invalid pointer access. The process is as follows: setup_net() ops_init() addrconf_init_net() all = kmemdup(...) ---> alloc "all" ... net->ipv6.devconf_all = all; __addrconf_sysctl_register() ---> failed ... kfree(all); ---> ipv6.devconf_all invalid ... ops_exit_list() ... ip6mr_sk_done() devconf = net->ipv6.devconf_all; //devconf is invalid pointer if (!devconf || !atomic_read(&devconf->mc_forwarding)) The following is the Call Trace information: BUG: KASAN: use-after-free in ip6mr_sk_done+0x112/0x3a0 Read of size 4 at addr ffff888075508e88 by task ip/14554 Call Trace: <TASK> dump_stack_lvl+0x8e/0xd1 print_report+0x155/0x454 kasan_report+0xba/0x1f0 kasan_check_range+0x35/0x1b0 ip6mr_sk_done+0x112/0x3a0 rawv6_close+0x48/0x70 inet_release+0x109/0x230 inet6_release+0x4c/0x70 sock_release+0x87/0x1b0 igmp6_net_exit+0x6b/0x170 ops_exit_list+0xb0/0x170 setup_net+0x7ac/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f7963322547 </TASK> Allocated by task 14554: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0xa1/0xb0 __kmalloc_node_track_caller+0x4a/0xb0 kmemdup+0x28/0x60 addrconf_init_net+0x1be/0x840 ops_init+0xa5/0x410 setup_net+0x5aa/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 14554: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x155/0x1b0 slab_free_freelist_hook+0x11b/0x220 __kmem_cache_free+0xa4/0x360 addrconf_init_net+0x623/0x840 ops_init+0xa5/0x410 setup_net+0x5aa/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 7d9b1b578d67 ("ip6mr: fix use-after-free in ip6mr_sk_done()") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221017080331.16878-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 07:49:10 +0000