summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-21scsi: qla2xxx: fix spelling mistake: "existant" -> "existent"Colin Ian King
Trivial fix to spelling mistake in debug message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: dpt_i2o: use after free in __adpt_reset()Dan Carpenter
In __adpt_reset() the problem is that adpt_hba_reset() frees "pHba" on error but we dereference it to print the name in the error message. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: dpt_i2o: use after free in adpt_release()Dan Carpenter
The scsi_host_put() function frees "pHba" and then we dereference it on the next line when we do "scsi_host_put(pHba->host);". [mkp: included fix from hch] Fixes: 38e09e3bb056 ("scsi: dpt_i2o: stop using scsi_unregister") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-19scsi: remove the old scsi_module.c initialization modelChristoph Hellwig
After more than 15 years all users of this legacy interface are finally gone. Rest in peace! Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-19scsi: remove the sym53c416 driverChristoph Hellwig
This driver hasn't seen any recent bug fixing and is one of the last drivers using the scsi_module.c infrastruture that has been deprecated 15 years ago. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-19scsi: remove the NCR53c406a driverChristoph Hellwig
This driver hasn't seen any recent bug fixing and is one of the last drivers using the scsi_module.c infrastruture that has been deprecated 15 years ago. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-19scsi: remove the fdomain and fdomain_cs driversChristoph Hellwig
These drivers haven't seen any recent bug fixing and are two of the last drivers using the scsi_module.c infrastruture that has been deprecated 15 years ago. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-19scsi: mvme147: stop using scsi_module.cChristoph Hellwig
Convert the driver to modern style probing. Given that there only is a single instance for a given board that can be done using a global struct Scsi_Host instance easily. Also fix the removal path by passing the correct cookie to free_irq, and enable it unconditionally. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-19scsi: esas2r: remove initialization / cleanup dead woodChristoph Hellwig
esas2r has been converted to hotplug style initialization long ago, but kept various remant of the old-style scsi_module.c initialization around. Remove those. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-19scsi: core: unexport scsi_host_set_stateChristoph Hellwig
This function is only used inside the SCSI midlayer, so remove the export for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-15scsi: csiostor: add support for 32 bit port capabilitiesVarun Prakash
32 bit port capabilities are required to support new speeds which can not be supported using 16 bit port capabilities. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-15scsi: bfa: remove VLAStephen Kitt
In preparation to enabling -Wvla, remove VLAs and replace them with fixed-length arrays instead. bfad_bsg.c uses a variable-length array declaration to measure the size of a putative array; this can be replaced by the product of the size of an element and the number of elements, avoiding the VLA altogether. This was prompted by https://lkml.org/lkml/2018/3/7/621 Signed-off-by: Stephen Kitt <steve@sk2.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-15scsi: aic7xxx: aic79xx: remove VLAsStephen Kitt
In preparation to enabling -Wvla, remove VLAs and replace them with fixed-length arrays instead. The arrays fixed here, using the number of constant sections, aren't really VLAs, but they appear so to the compiler. Replace the array sizes with a pre-processor-level constant instead using ARRAY_SIZE. This was prompted by https://lkml.org/lkml/2018/3/7/621 Signed-off-by: Stephen Kitt <steve@sk2.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-15scsi: scsi_dh_alua: Correct comment for alua_alloc_pg()John Pittman
In the comment for function alua_alloc_pg() the argument '@h' is mistakenly referred to. Fix this by replacing it with the correct argument reference, '@tpgs', and provide a short description. Signed-off-by: John Pittman <jpittman@redhat.com> Reviewed-by Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-15scsi: documentation: remove ChangeLog.1992-1997Christoph Hellwig
This 20+ year old changelog has no useful information for kernel development or users, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-15scsi: aha1740: stop using scsi_unregisterChristoph Hellwig
aha1740 doesn't use scsi_register, so it should not use scsi_unregister either. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-15scsi: ips: don't set .detect and .release in the host templateChristoph Hellwig
Since moving away from using scsi_module.c these were never called. The implementations are called directly, though so they remain. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-15scsi: dpt_i2o: stop using scsi_unregisterChristoph Hellwig
dpt_i2o doesn't use scsi_register, so it should not use scsi_unregister either. Also refactor the module exit path to make a little more sense. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-14scsi: eata: eata-pio: Deprecate legacy EATA driversMartin K. Petersen
These two drivers do not appear to be in active use. Deprecate them. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-14scsi: lpfc: make several unions static, fix non-ANSI prototypeColin Ian King
There are several unions that are local to the source and do not need to be in global scope, so make them static. Also add in a missing void parameter to functions lpfc_nvme_cmd_template and lpfc_nvmet_cmd_template to clean up non-ANSI warning. Cleans up sparse warnings: drivers/scsi/lpfc/lpfc_nvme.c:68:19: warning: symbol 'lpfc_iread_cmd_template' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvme.c:69:19: warning: symbol 'lpfc_iwrite_cmd_template' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvme.c:70:19: warning: symbol 'lpfc_icmnd_cmd_template' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvme.c:74:24: warning: non-ANSI function 'lpfc_tsend_cmd_template' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvmet.c:78:19: warning: symbol 'lpfc_treceive_cmd_template' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvmet.c:79:19: warning: symbol 'lpfc_trsp_cmd_template' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvmet.c:83:25: warning: non-ANSI function declaration of function 'lpfc_nvmet_cmd_template' Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: device_handler: remove VLAsStephen Kitt
In preparation to enabling -Wvla, remove VLAs and replace them with fixed-length arrays instead. scsi_dh_{alua,emc,rdac} use variable-length array declarations to store command blocks, with the appropriate size as determined by COMMAND_SIZE. This patch replaces these with fixed-sized arrays using MAX_COMMAND_SIZE, so that the array size can be determined at compile time. This was prompted by https://lkml.org/lkml/2018/3/7/621 Signed-off-by: Stephen Kitt <steve@sk2.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: jazz_esp, sun3x_esp: Pass struct device pointer in dma callsFinn Thain
In jazz_esp and sun3x_esp, the esp_driver_ops methods pass esp->dev in dma api calls as if it was a pointer to a struct device. But it actually points to a struct platform_device. Fix this. Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: hisi_sas: add v3 hw MODULE_DEVICE_TABLE()Xiang Chen
Export device table of v3 hw to userspace, or auto probe will fail for v3 hw. Also change the module alias to include "pci", instead of "platform". Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: hisi_sas: modify some register config for hip08Xiaofei Tan
Do some modifications for register configuring for hip08. In future, to reduce kernel churn with patches to modify registers, any registers which may change between board models (mostly PHY/SERDES related) should be set in ACPI reset handler. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: hisi_sas: Code cleanup and minor bug fixesXiang Chen
The patch does some code cleanup and fixes some small bugs: - Correct return status of phy_up_v3_hw() and phy_bcast_v3_hw() - Add static for function phy_get_max_linkrate_v3_hw() - Change exception return status when no reset method - Change magic value to ts->stat in slot_complete_vx_hw() - Remove unnecessary check for dev_is_sata() - Fix some issues of alignment and indents (Authored by Xiaofei Tan in another patch, but added here to be practical) Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: hisi_sas: fix return value of hisi_sas_task_prep()Xiaofei Tan
It is an implicit regulation that error code that function returned should be negative. But hisi_sas_task_prep() doesn't follow this. This may cause problems in the upper layer code. For example, in sas_expander.c of libsas, smp_execute_task_sg() may return the number of bytes of underrun. It will be conflicted with the scenaio lldd_execute_task() return an positive error code. This patch change the return value from SAS_PHY_DOWN to -ECOMM in hisi_sas_task_prep(). Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: hisi_sas: remove unused variable hisi_sas_devices.running_reqXiang Chen
The structure element hisi_sas_devices.running_req to count how many commands are active is in effect only ever written in the code, so remove it. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: hisi_sas: increase timer expire of internal abort taskXiaofei Tan
The current 110ms expiry time is not long enough for the internal abort task. The reason is that the internal abort task could be blocked in HW if the HW is retrying to set up link. The internal abort task will be executed only when the retry process finished. The maximum time is 5s for the retry of setting up link. So, the timer expire should be more than 5s. This patch increases it from 110ms to 6s. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: hisi_sas: fix the issue of setting linkrate registerXiaofei Tan
It is not right to set the register PROG_PHY_LINK_RATE while PHY is still enabled. So if we want to change PHY linkrate, we need to disable PHY before setting the register PROG_PHY_LINK_RATE, and then start-up PHY. This patch is to fix this issue. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: hisi_sas: fix the issue of link rate inconsistencyXiaofei Tan
In sysfs, there are two files about minimum linkrate, and also two files for maximum linkrate. Take maximum linkrate example, maximum_linkrate_hw is read-only and indicated by the register HARD_PHY_LINKRATE, and maximum_linkrate is read-write and corresponding to the register PROG_PHY_LINK_RATE. But in the function phy_up_v*_hw(), we get *_linkrate value from HARD_PHY_LINKRATE. It is not right. This patch is to fix this issue. Unreferenced PHY-interrupt enum is also removed for v3 hw. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: hisi_sas: support the property of signal attenuation for v2 hwXiaofei Tan
The register SAS_PHY_CTRL is configured according to signal quality. The signal quality is calculated by signal attenuation of hardware physical link. It may be different for different PCB layout. So, in order to give better support to new board, this patch add support to reading the devicetree property, "hisilicon,signal-attenuation". Of course, we still keep an default value in driver to adapt old board. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: hisi_sas: dt-bindings: add an property of signal attenuationXiaofei Tan
For some new boards with hip07 chipset we are required to set PHY config registers differently. The hw property which determines how to set these registers is in the PHY signal attenuation readings. This patch add an devicetree property, "hisilicon,signal-attenuation", which is used to describe the signal attenuation of an board. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: core: Make SCSI Status CONDITION MET equivalent to GOODDouglas Gilbert
The SCSI PRE-FETCH (10 or 16) command is present both on hard disks and some SSDs. It is useful when the address of the next block(s) to be read is known but it is not following the LBA of the current READ (so read-ahead won't help). It returns two "good" SCSI Status values. If the requested blocks have fitted (or will most likely fit (when the IMMED bit is set)) into the disk's cache, it returns CONDITION MET. If it didn't (or will not) fit then it returns GOOD status. The goal of this patch is to stop the SCSI subsystem treating the CONDITION MET SCSI status as an error. The current state makes the PRE-FETCH command effectively unusable via pass-throughs. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: lpfc: Change Copyright of 12.0.0.1 modified files to 2018James Smart
Updated Copyright in files updated as part of 12.0.0.1 Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: lpfc: update driver version to 12.0.0.1James Smart
Update the driver version to 12.0.0.1 Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: lpfc: Memory allocation error during driver start-up on power8James Smart
The driver fails to allocate command buffers in the routine lpfc_new_scsi_buf_s4 There is an inconsistency between lpfc_mem_alloc(), where the phba->lpfc_sg_dma_buf_pool is created, and lpfc_new_scsi_buf_s4(), when we allocate a buffer from the pool and check the alignment. The alignment should be on a page boundary, based on LPFC_SLI3_BG_ENABLED in sli3_options, for both cases. Fix by explicitly tracking sli4 vs sli3 and BG options. The result is that phba->cfg_sg_dma_buf_size is now set correctly for SLI-4. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: lpfc: Fix mailbox wait for POST_SGL mbox commandJames Smart
POST_SGL_PAGES mailbox command failed with status (timeout). wait_event_interruptible_timeout when called from mailbox wait interface, gets interrupted, and will randomly fail. Behavior seems very specific to 1 particular server type. Fix by changing from wait_event_interruptible_timeout to wait_for_completion_timeout. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: lpfc: Fix SCSI lun discovery when port configured for both SCSI and NVMEJames Smart
When a port is configured for NVME and SCSI Initiator support and it probes a target supporting both SCSI and NVME, NVME devices are discovered, but SCSI devices are not. The nlp_fc4_type for all NPorts should be cleared on Link Up or just before GID_FTs get issued, as opposed to just during GID_FT cmpl. RSCN activity as well as Link Up can trigger GID_FT. One GID_FT may complete before the next one is issued. Fix by clearng nlp_fc4_type on link up and just before both GID_FTs are issued. During port swapping, copy nlp_fc4_type to the new ndlp Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: lpfc: Streamline NVME Targe6t WQE setupJames Smart
To reduce latency when initializing WQE content, created templates for the most common wqes. This reduces the number of operations taken to set the content. It's not a lot of speed up, but every bit helps. This patch updates the NVME target path. [mkp: fixed typo] Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: lpfc: Streamline NVME Initiator WQE setupJames Smart
To reduce latency when initializing WQE content, create templates for the most common wqes. This reduces the number of operations taken to set the content. It's not a lot of speed up, but every bit helps. This patch updates the NVME initiator path. [mkp: fixed typo] Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: lpfc: Code cleanup for 128byte wqe data typeJames Smart
The driver is very sloppy about the WQE structure passed between routines. The base struct type is a 64byte wqe. But in many routines they typecast and access 128byte wqes. There were a couple of cases in the past (corrected already) where the typecasts were incorrectly done and the 64byte buffer was accessed as a 128 byte buffer. Clean this up by properly declaring wqe's as 128byte wqe's and removing the typecasts. 64byte wqes are considered a subset of the 128byte wqes. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: lpfc: Fix NVME Initiator FirstBurstJames Smart
First Burst support was not properly indicated in NVMe PRLI. Correct the bit position and the logic to check and set first burst support. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: lpfc: Add missing unlock in WQ full logicJames Smart
Commit 6e8e1c14c61e ("scsi: lpfc: Add WQ Full Logic for NVME Target") fails the static checker. Checker correctly identified a missing unlock on a return path. Add the unlock. Fixes: 6e8e1c14c61e ("scsi: lpfc: Add WQ Full Logic for NVME Target") Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: ipr: Use dma_pool_zalloc()Souptick Joarder
Use dma_pool_zalloc() instead of dma_pool_alloc + memset Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-06scsi: lpfc: use __raw_writeX on DPP copiesJames Smart
Commit 1351e69fc6db ("scsi: lpfc: Add push-to-adapter support to sli4") fails compilation on some 32-bit systems as writeq() is not supported on all architectures. Additionally, it was pointed out that as writeX() does byteswapping if necessary for pci vs the cpu endianness, the code was broken on BE PPC. After discussions with Arnd Bergmann, we've resolved the issue to the following: Instead of writeX(), use __raw_writeX() - which writes to io space while preserving byte order. To use this, the code was changed to use a different buffer that lpfc prepped via sli_pcimem_bcopy() that was set to the bytestream to be written. On platforms with __raw_writeq support, use the routine, otherwise use __raw_writel() [mkp: checkpatch] Fixes: 1351e69fc6db ("scsi: lpfc: Add push-to-adapter support to sli4") Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-06scsi: core: use blk_mq_requeue_request in __scsi_queue_insertJianchao Wang
In scsi core, __scsi_queue_insert should just put request back on the queue and retry using the same command as before. However, for blk-mq, scsi_mq_requeue_cmd is employed here which will unprepare the request. To align with the semantics of __scsi_queue_insert, use blk_mq_requeue_request with kick_requeue_list == true and put the reference of scsi_device. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-06scsi: megaraid: Use dma_pool_zalloc()Souptick Joarder
Use dma_pool_zalloc() instead of dma_pool_alloc + memset Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-06scsi: smartpqi: add in new supported controllersKevin Barnett
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-06scsi: mpt3sas: clarify mmio pointer typesArnd Bergmann
The newly added code mixes up phys_addr_t/resource_size_t with dma_addr_t and void pointers, as seen from these compiler warning: drivers/scsi/mpt3sas/mpt3sas_base.c: In function '_base_get_chain_phys': drivers/scsi/mpt3sas/mpt3sas_base.c:235:21: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] base_chain_phys = (void *)ioc->chip_phys + MPI_FRAME_START_OFFSET + ^ drivers/scsi/mpt3sas/mpt3sas_base.c: In function '_clone_sg_entries': drivers/scsi/mpt3sas/mpt3sas_base.c:427:20: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] sgel->Address = (dma_addr_t)dst_addr_phys; ^ drivers/scsi/mpt3sas/mpt3sas_base.c:438:7: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] (dma_addr_t)buff_ptr_phys; ^ drivers/scsi/mpt3sas/mpt3sas_base.c:444:10: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] (dma_addr_t)buff_ptr_phys; Both dma_addr_t and phys_addr_t may be wider than a pointer, so we must avoid the conversion to pointer types. This also helps readability. A second problem is treating MMIO addresses from a 'struct resource' as addresses that can be used for DMA on that device. In almost all cases, those are the same, but on some of the more obscure architectures, PCI memory address 0 is mapped into the CPU address space at a nonzero offset. I don't have a good fix for that, so I'm adding a comment here, plus a WARN_ON() that triggers whenever the phys_addr_t number is outside of the low 32-bit address space and causes a straight overflow when assigned to the 32-bit sgel->Address. Fixes: 182ac784b41f ("scsi: mpt3sas: Introduce Base function for cloning.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-01scsi: sd: Documentation: add sd-parameters.txtWeiping Zhang
Add a file for documenting SCSI sd module parameters and describe the cache_type setting. [mkp: tweaked text a bit] Signed-off-by: Weiping Zhang <zhangweiping@didichuxing.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 15:48:54 +0000