summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-01-13x86/xen: properly retrieve NMI reasonJan Beulich
Using the native code here can't work properly, as the hypervisor would normally have cleared the two reason bits by the time Dom0 gets to see the NMI (if passed to it at all). There's a shared info field for this, and there's an existing hook to use - just fit the two together. This is particularly relevant so that NMIs intended to be handled by APEI / GHES actually make it to the respective handler. Note that the hook can (and should) be used irrespective of whether being in Dom0, as accessing port 0x61 in a DomU would be even worse, while the shared info field would just hold zero all the time. Note further that hardware NMI handling for PVH doesn't currently work anyway due to missing code in the hypervisor (but it is expected to work the native rather than the PV way). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-01-12staging: vt6655: fix sparse warning: argument typeEddie Kovsky
Fixes following warning generated by sparse: drivers/staging/vt6655/baseband.c:2180:45: warning: incorrect type in argument 1 (different address spaces) drivers/staging/vt6655/baseband.c:2180:45: expected struct vnt_private *priv drivers/staging/vt6655/baseband.c:2180:45: got void [noderef] <asn:2>*dwIoBase Compile tested on next-20141219. Signed-off-by: Eddie Kovsky <ewk@edkovsky.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12staging: vt6655: Fix loss of distant/weak access points on channel change.Malcolm Priestley
If the asssocated access point is strong byBBVGACurrent will be adjusted accordingly. Users will nolonger see distant access points without taking down interface. When changing channel reset byBBVGACurrent back to pDevice->abyBBVGA[0] for max sensitivity. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12staging: vt6655: vnt_tx_packet Fix corrupted tx packets.Malcolm Priestley
Move PSTxDesc->m_td1TD1 to inside spin locks. if m_td1TD1.byTCR has TCR_EDP and TCR_STP are set, the interrupt handler will try and complete the buffer before it is completed. Usually on the tail of a burst of tx packets. This results in a partially completed packet being transmitted or worse sitll dead lock when skb is freed by the interrupt handler. Set head_td->m_td1TD1.byTCR to 0 in first lock of vnt_tx_packet to stop interrupt handler completing the buffer. Move Set TSR1 & ReqCount in s_cbFillTxBufHead to the second lock. cbReqCount is carried to the second lock in pTDInfo->dwReqCount without the padding removed. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12staging: vt6655: fix sparse warnings: incorrect argument typeMike Krinkin
this patch fixes following sparse warnings: drivers/staging/vt6655/device_main.c:1503:25: warning: incorrect type in argument 1 (different address spaces) drivers/staging/vt6655/device_main.c:1503:25: expected void [noderef] <asn:2>*<noident> drivers/staging/vt6655/device_main.c:1503:25: got struct vnt_private * drivers/staging/vt6655/device_main.c:1503:25: warning: incorrect type in argument 2 (different address spaces) drivers/staging/vt6655/device_main.c:1503:25: expected void [noderef] <asn:2>*<noident> drivers/staging/vt6655/device_main.c:1503:25: got struct vnt_private * drivers/staging/vt6655/device_main.c:1505:25: warning: incorrect type in argument 1 (different address spaces) drivers/staging/vt6655/device_main.c:1505:25: expected void [noderef] <asn:2>*<noident> drivers/staging/vt6655/device_main.c:1505:25: got struct vnt_private * drivers/staging/vt6655/device_main.c:1505:25: warning: incorrect type in argument 2 (different address spaces) drivers/staging/vt6655/device_main.c:1505:25: expected void [noderef] <asn:2>*<noident> drivers/staging/vt6655/device_main.c:1505:25: got struct vnt_private * Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-13Merge tag 'gpio-v3.19-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio fixes from Linus Walleij: "Here are some GPIO fixes, mainly affecting the DLN2 IRQ handling. Nothing special about them, just fixes: - Three patches fixing IRQ handling for the DLN2 - Null pointer handling for grgpio" * tag 'gpio-v3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: dln2: use bus_sync_unlock instead of scheduling work gpio: grgpio: Avoid potential NULL pointer dereference gpio: dln2: Fix gpio output value in dln2_gpio_direction_output() gpio: dln2: fix issue when an IRQ is unmasked then enabled
2015-01-13Merge tag 'mmc-v3.19-3' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds
Pull MMC fixes from Ulf Hansson: "MMC host: - sdhci-pci|acpi: Support some new IDs - sdhci: Fix sleep from atomic context - sdhci-pxav3: Prevent hang during ->probe() - sdhci: Disable re-tuning for HS400" * tag 'mmc-v3.19-3' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: sdhci-pci: Add support for Intel SPT mmc: sdhci-acpi: Add ACPI HID INT344D mmc: sdhci: Fix sleep in atomic after inserting SD card mmc: sdhci-pxav3: do the mbus window configuration after enabling clocks mmc: sdhci: Disable re-tuning for HS400 mmc: sdhci: Simplify use of tuning timer mmc: sdhci: Add out_unlock to sdhci_execute_tuning mmc: sdhci: Tuning should not change max_blk_count
2015-01-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull scsi target fixes from Nicholas Bellinger: "Mostly minor fixes this time, including: - Add missing virtio-scsi -> TCM attribute conversion in vhost-scsi. - Fix persistent reservations write exclusive handling to allow readers for all registered I_T nexuses. - Drop arbitrary maximum I/O size limit in order to process I/Os larger than 4 MB, required for initiators that don't honor block limits EVPD. - Drop the now left-over fabric_max_sectors attribute" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: Fix typos in enum cmd_flags_table MAINTAINERS: Add entry for iSER target driver target: Allow Write Exclusive non-reservation holders to READ target: Drop left-over fabric_max_sectors attribute target: Drop arbitrary maximum I/O size limit Documentation/target: Update fabric_ops to latest code vhost-scsi: Add missing virtio-scsi -> TCM attribute conversion
2015-01-13mm: mmu_gather: use tlb->end != 0 only for TLB invalidationWill Deacon
When batching up address ranges for TLB invalidation, we check tlb->end != 0 to indicate that some pages have actually been unmapped. As of commit f045bbb9fa1b ("mmu_gather: fix over-eager tlb_flush_mmu_free() calling"), we use the same check for freeing these pages in order to avoid a performance regression where we call free_pages_and_swap_cache even when no pages are actually queued up. Unfortunately, the range could have been reset (tlb->end = 0) by tlb_end_vma, which has been shown to cause memory leaks on arm64. Furthermore, investigation into these leaks revealed that the fullmm case on task exit no longer invalidates the TLB, by virtue of tlb->end == 0 (in 3.18, need_flush would have been set). This patch resolves the problem by reverting commit f045bbb9fa1b, using instead tlb->local.nr as the predicate for page freeing in tlb_flush_mmu_free and ensuring that tlb->end is initialised to a non-zero value in the fullmm case. Tested-by: Mark Langsdorf <mlangsdo@redhat.com> Tested-by: Dave Hansen <dave@sr71.net> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-12Merge tag 'v3.19-rockhip-clkfixes1' of ↵Michael Turquette
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes - two currently unused clocks that need to stay enabled - fix the lock bit locations of the rk3066 plls - fix rk3288 core divider values to the ones actually specified by the soc vendor
2015-01-12usb/kaweth: use GFP_ATOMIC under spin_lock in usb_start_wait_urb()Alexey Khoroshilov
Commit e4c7f259c5be ("USB: kaweth.c: use GFP_ATOMIC under spin_lock") makes sure that kaweth_internal_control_msg() allocates memory with GFP_ATOMIC, but kaweth_internal_control_msg() also calls usb_start_wait_urb() that still allocates memory with GFP_NOIO. The patch fixes usb_start_wait_urb() as well. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12MAINTAINERS: add me as ibmveth maintainerThomas Falcon
Adding myself as the ibmveth maintainer and replacing Santiago Leon. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Cc: Santiago Leon <santi_leon@yahoo.com> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12usb: renesas_usbhs: add OTG ID signal sensingSergei Shtylyov
On the Renesas R8A7791 SoC based boards there's MAX3355 USB OTG chip and mini-AB USB connector corresponding to USB port 0 driven either by EHCI/OHCI or Renesas USBHS gadget controller. And we'd like the host/gadget drivers to work based on the cable type connected. An 'extcon' driver for MAX3355 has been written, so we only need to bind to it via device tree which I'm doing in this patch. (Perhaps, it would also make sense to use OTG HNP when the USBHS host mode is active and a B-cable is connected but I don't have access to host-capable USBHS, so wouldn't be able to test it.) Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: report disconnection after resetMian Yousaf Kaukab
If usb bus is reset without a physical disconnection, all endpoints will remain open. Call s3c_hsotg_disconnect() from reset handler to report a disconnect to gadget framework. hsotg->connected is checked in s3c_hsotg_disconnect() before processing disconnect. In some cases, USBRst is seen before EnumDone and after it as well. So move setting of hsotg->connected to set-address to avoid reporting extra disconnection in this case. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: force gadget initialization in dev modeGregory Herrero
When booting with id pin grounded, dwc2 default to host mode. Thus, force device mode prior initializing gadget part. Else fifo init will fail since fifo values are not correct in host mode. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: add vbus_draw supportGregory Herrero
This callback informs the driver about the total amount of current it is allowed to draw. Share this information with the phy so that current limits can be set for charging for example. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: fix pullup handlingGregory Herrero
Gadget must be informed about disconnection when pullup is removed. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: reset fifo_map when initializing fifosGregory Herrero
After all endpoints are disabled, fifo_map should have reached 0. Its a bug if if didn't, so warn about it and reset it to 0 so that driver can continue using all the fifos. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: fix fifo allocation leakMian Yousaf Kaukab
When selecting different alt setting, s3c_hsotg_ep_enable can be called with fifo already allocated. Allocate fifo again only if required and after deallocating the previous fifo. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: pick smallest acceptable fifoMian Yousaf Kaukab
Current algorithm picks the first fifo which is equal to or greater than the required size. This can result in bigger fifos assigned to endpoints with smaller maxps. Change the algorithm to pick the smallest fifo which is greater than or equal to the required size. Moreover, only use signed variables when required. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: rename sent_zlp to send_zlpMian Yousaf Kaukab
This flag is set before sending the zlp. So use present tense instead of the past tense. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: add vbus_session supportGregory Herrero
Enable phy driver to report vbus session. This allows us to remove D+ pullup when vbus is not present. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: don't block after fifo flush timeoutGregory Herrero
Can't stay in the loop forever. Break it after timeout. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: dont warn if endpoint is not enabledMian Yousaf Kaukab
The warning is probably good but it has false positives in both dma and non-dma cases. So its not very helpful in either. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: fix zero length packet transfersMian Yousaf Kaukab
According to programming guide, zero length packet should be programmed on its own and should not be counted in DIEPTSIZ.PktCnt with other packets. For ep0, this is the zlp for DATA IN stage (if required) and not for the STATUS stage. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: manage ep0 state in softwareMian Yousaf Kaukab
Manage ep0 state in software to add handling of status OUT stage. Just toggling hsotg->setup in s3c_hsotg_handle_outdone leaves it in wrong state in 2-stage control transfers. Moreover, ensure that for setup-packet s3c_hsotg_handle_outdone is called either from SetupDone or OutDone but not both. Dwc2 ip v3.00a generates both SetupDone and OutDone on setup packets. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: kill requests after disabling epMian Yousaf Kaukab
kill_all_requests() can flush the fifo. Call it after disabling the endpoint. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: consider all tx fifosMian Yousaf Kaukab
When matching tx fifo to endpoint, consider all fifos instead of hard limiting to 8 Moreover, print error in case no fifo could be found. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: fix debug loop limitsMian Yousaf Kaukab
< 15 check doesn't show debug information for endpoint 15. It is possible to have less than 15 endpoints so use limit provided by hardware configuration. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: remove unused members from hsotg_reqMian Yousaf Kaukab
These members are only occupying space. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12Documentation: dt-bindings: add dt binding info for dwc2 fifo resizingGregory Herrero
Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: configure fifos from device treeGregory Herrero
As fifo size can vary between SOCs, add possibility to configure them from device tree. Fifo sizes used by the legacy driver will be used If they are not provided by the device tree. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Reviewed-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: check interrupts for all endpointsMian Yousaf Kaukab
Current code does not check endpoint 15 interrupt. Use number of endpoint configured in hardware instead of the hardcoded value. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: add bi-directional endpoint supportMian Yousaf Kaukab
GHWCFG1 provides hardware configuration of each endpoint. Use it to configure the endpoints instead of assuming all even endpoint are OUT and all odd endpoints are IN. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12Documentation: dt-bindings: add dt binding info for dwc2 g-use-dmaGregory Herrero
Indicate if gadget driver must use dma for usb transfers. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: add device tree property to enable dmaGregory Herrero
* Add an of specific function to parse device node properties. * Enable dma usage only if device tree property 'g_use_dma' is present. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: don't erase gahbcfg register when enabling dmaGregory Herrero
Do a read-modify-write instead of only setting DMAEn bit. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: write correct value in ahbcfg registerGregory Herrero
HBstLen is GAHBCFG[4:1]. Use GAHBCFG_HBSTLEN_SHIFT to write burst- length at correct position. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: fix error path in dwc2_gadget_initMian Yousaf Kaukab
In the error path, s3c_hsotg_phy_disable should be called after a call to s3c_hsotg_phy_enable is made. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: don't embed ep0 buffersMian Yousaf Kaukab
When using DMA, data of the previous setup packet can be read back from cache because ep0 and ctrl buffers are embedded in struct s3c_hsotg. Allocate buffers instead of embedding them. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Reviewed-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: don't process XferCompl on setup packetMian Yousaf Kaukab
Only process DOEPINT.XferCompl on data packet as DOEPINTn.SetUp can occur with or without DOEPINT.XferCompl. When DOEPINT.SetUp occurs with DOEPINT.XferCompl, only DOEPINT.SetUp needs to be handled. Moreover, ignore DOEPINT.XferCompl when it occurs with DOEPINT.StupPktRcvd as driver needs to wait for DOEPINT.SetUp to continue. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: mask fifo empty irq with dmaMian Yousaf Kaukab
When using DMA, keep fifo empty interrupt disabled. Otherwise core is flooded by interrupts. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12usb: dwc2: gadget: register gadget handle to the phyGregory Herrero
Bind peripheral controller to the phy on udc_start. Unbind on udc_stop. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12tipc: fix bug in broadcast retransmit codeJon Paul Maloy
In commit 58dc55f25631178ee74cd27185956a8f7dcb3e32 ("tipc: use generic SKB list APIs to manage link transmission queue") we replace all list traversal loops with the macros skb_queue_walk() or skb_queue_walk_safe(). While the previous loops were based on the assumption that the list was NULL-terminated, the standard macros stop when the iterator reaches the list head, which is non-NULL. In the function bclink_retransmit_pkt() this macro replacement has lead to a bug. When we receive a BCAST STATE_MSG we unconditionally call the function bclink_retransmit_pkt(), whether there really is anything to retransmit or not, assuming that the sequence number comparisons will lead to the correct behavior. However, if the transmission queue is empty, or if there are no eligible buffers in the transmission queue, we will by mistake pass the list head pointer to the function tipc_link_retransmit(). Since the list head is not a valid sk_buff, this leads to a crash. In this commit we fix this by only calling tipc_link_retransmit() if we actually found eligible buffers in the transmission queue. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12thermal: rcar: Spelling/grammar: s/drier use .../driver uses ...s/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-12update ip-sysctl.txt documentation (v2)Ani Sinha
Update documentation to reflect the fact that /proc/sys/net/ipv4/route/max_size is no longer used for ipv4. Signed-off-by: Ani Sinha <ani@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12net/at91_ether: prepare and unprepare clockAlexandre Belloni
The clock is enabled without being prepared, this leads to: WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:889 __clk_enable+0x24/0xa8() and a non working ethernet interface. Use clk_prepare_enable() and clk_disable_unprepare() to handle the clock. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12isdn: fix NUL (\0 or \x00) specification in stringGiel van Schijndel
In C one can either use '\0' or '\x00' (or '\000') to add a NUL byte to a string. '\0x00' isn't part of these and will in fact result in a single NUL followed by "x00". This fixes that. Signed-off-by: Giel van Schijndel <me@mortis.eu> Reported-at: http://www.viva64.com/en/b/0299/ Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12Merge tag 'fixes-for-v3.19-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v3.19-rc5 Just three fixes this time. An oops fix in ep_write() from gadgetfs, another oops for the Atmel UDC when unloading a gadget driver and the fix for PHY deferred probing. Signed-off-by: Felipe Balbi <balbi@ti.com> Conflicts: drivers/usb/phy/phy.c
2015-01-12usb: gadget: mv_udc_core: delete pullup operation at .udc_startPeter Chen
UDC core has already done it after .udc_start. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 21:58:39 +0000