summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-10-29iwlwifi: mvm: BT Coex - make the multiprio lut a constantEmmanuel Grumbach
This makes it easier to tune the values during the testing. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: mvm: remove mvm argument from get_queues_maskArik Nemtsov
It is unused and won't be available in some future invocations of the function. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: mvm: add MVM_FW_BCAST_FILTER_PASS_ALL optionMax Stepanov
The MVM_FW_BCAST_FILTER_PASS_ALL option defined in iwl-dbg-cfg.ini configuration file allows to enable/disable FW broadcast filtering. If MVM_FW_BCAST_FILTER_PASS_ALL is not defined in iwl-dbg-cfg.ini or its value is 0, the mvm broadcast filtering is enabled. Setting MVM_FW_BCAST_FILTER_PASS_ALL=1 in iwl-dbg-cfg.ini blocks sending of BCAST_FILTER_CMD to FW. Signed-off-by: Max Stepanov <Max.Stepanov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: mvm: BT Coex - move BT_ANTENNA_COUPLING_THRESHOLD to constantsEmmanuel Grumbach
This is were it really needs to be. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: always run the secured flow for family 8000Eran Harary
In the new format the "CSS section" has the same TLV type as the "mem section". So we need to run the secured flow for all the 8000 products. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: pcie: fix recovery from ARC reset in WoWLANEmmanuel Grumbach
When the ARC is reset when we exit from Sx in case we had WoWLAN running, we can't access the prph before we reset the NIC. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: pcie: warn if extern fw_debug buffer failedEmmanuel Grumbach
Otherwise we have no way to know that the buffer hasn't been allocated. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: allow to restrict Tx aggregation size per-deviceGregory Greenman
A few slave bus devices show better performance when we reduce the size of the Tx A-MPDU. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: mvm: change the iwl_mvm_d3_iface_iterator into a generic functionLuciano Coelho
Getting the BSS station vif is something that may be needed by other parts of the code. So, instead of having an iterator specifically for d3, change it into a generic one in utils.c. Additionally, add a iwl_mvm_get_bss_vif() function to make it easier to retrieving it. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: mvm: add debugfs entry to configure netdetect SSIDsLuciano Coelho
Before we get all the chain (ie. mac80211, cfg80211, nl80211 and userspace) changed to support net-detect, we can use this debugfs entry for easy testing and as a proof of concept. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: mvm: spin off a function to start scan offloadLuciano Coelho
The net-detect feature will require a scan offload to be started in the same way it is done now for scheduled scan. Spin a new function off of the sched_scan_start op code for reuse. Additionally, restructure the function a bit for more readability. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: mvm: move the check if associated outside of the iterator for wowlanLuciano Coelho
Instead of checking if we are associated when suspending with wowlan enabled in the interface iterator, allow it to return an unassociated vif and move the check to the main suspend function. This will be needed by netdetect, since it should also work when we are not associated but the vif is active. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: mvm: split wowlan handling out of the main suspend functionLuciano Coelho
Take the WoWLAN handling code out of the main suspend function, dividing it into three parts: get_config (which is used before the firmware is switched), switch_to_d3 (which handles the rebooting of the hardware with the D3 firmware) and config (which configures the D3 firmware for WoWLAN operation). This is necessary to prepare for the net-detect implementation, which will use only the switch_to_d3 part of this flow. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: mvm: hold the rtnl when resuming from a d3 testLuciano Coelho
We use ieee80211_iter_keys() which requires the rtnl to be held. If we don't lock the rtnl, like we do when we suspend during a d3 test, we get the following splat: RTNL: assertion failed at net/mac80211/key.c (566) CPU: 1 PID: 26529 Comm: cat Tainted: G W O 3.10.29-dev #1 Hardware name: Dell Inc. Latitude E6430/0CPWYR, BIOS A09 12/13/2012 e7b15008 e7b15008 e68adc1c c168aa62 e68adc54 f91f20b6 f923700c f9236fd8 00000236 00000000 ece23874 00000000 f94941e0 00000000 e43b8e48 e7b15008 00000000 e8b69e78 e68adcc0 f9493ab9 e68adc68 00000000 e43b8e48 e7b15008 Call Trace: [<c168aa62>] dump_stack+0x16/0x18 [<f91f20b6>] ieee80211_iter_keys+0x166/0x170 [mac80211] [<f94941e0>] ? iwl_mvm_query_wakeup_reasons+0x5f0/0x5f0 [iwlmvm] [<f9493ab9>] iwl_mvm_setup_connection_keep.isra.5+0x99/0x1d0 [iwlmvm] [<f9165e28>] ? cfg80211_report_wowlan_wakeup+0x308/0x510 [cfg80211] [<f9493fe5>] iwl_mvm_query_wakeup_reasons+0x3f5/0x5f0 [iwlmvm] [<c116125a>] ? init_object+0x3a/0x70 [<f8a5b8ee>] ? iwl_trans_pcie_d3_resume+0x1be/0x3a0 [iwlwifi] [<f94956da>] __iwl_mvm_resume+0x14a/0x180 [iwlmvm] [<f9495736>] iwl_mvm_d3_test_release+0x26/0xc0 [iwlmvm] [<c117a64d>] __fput+0xad/0x210 [<c117a7bd>] ____fput+0xd/0x10 [<c10601a1>] task_work_run+0x81/0xb0 [<c1040fa5>] do_exit+0x255/0xac0 [<c104e511>] ? dequeue_signal+0x31/0x1a0 [<c1041888>] do_group_exit+0x38/0xa0 [<c10a6cfb>] ? trace_hardirqs_on+0xb/0x10 [<c1051c31>] get_signal_to_deliver+0x1e1/0x8e0 [<c104bd52>] ? try_to_del_timer_sync+0x42/0x60 [<c104bd70>] ? try_to_del_timer_sync+0x60/0x60 [<c168dc82>] ? schedule_timeout+0x102/0x2a0 [<c10011ba>] do_signal+0x3a/0x8e0 [<c104b190>] ? __internal_add_timer+0xb0/0xb0 [<c168de7a>] ? schedule_timeout_interruptible+0x1a/0x20 [<c104ce39>] ? msleep_interruptible+0x39/0x40 [<f94939a9>] ? iwl_mvm_d3_test_read+0x49/0x70 [iwlmvm] [<c11797fc>] ? vfs_read+0x8c/0x160 [<c11243af>] ? SyS_fadvise64_64+0x15f/0x2b0 [<f9493960>] ? iwl_mvm_wowlan_program_keys+0x4a0/0x4a0 [iwlmvm] [<c1179a57>] ? SyS_read+0x57/0xa0 [<c1001acf>] do_notify_resume+0x6f/0xa0 [<c1692500>] work_notifysig+0x29/0x31 Fix this by hold the rtnl lock when calling __iwl_mvm_resume() in the d3 test wake up path. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: mvm: remove unneeded NULL pointer checkEmmanuel Grumbach
mac80211 will never call rate_control_tx_status with a NULL pointer for sta. Remove the superfluous check. This check misled smatch. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: rs: option to easily disable Tx MIMOEyal Shapira
The current TLC isn't optimized for low latency and some devices have issues with MIMO. This kind of combo creates latency issues. Allow to temporarily disable MIMO for tests in order to solve the latency issues without the added complexity of MIMO. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29Merge remote-tracking branch 'iwlwifi-fixes/master' into iwlwifi-nextEmmanuel Grumbach
2014-10-28ieee802154: introduce sysfs fileAlexander Aring
This patch moves the sysfs handling in a own file. This is like wireless sysfs file handling. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: cleanup open count handlingAlexander Aring
This patch cleanups the open_count variable increment in open and close calls of netdev. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: move mac_params functions into mac_cmdAlexander Aring
These functions can be static in mac_cmd file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: remove channel attributes from sdataAlexander Aring
These channel attributes was part of "channel context switch while xmit" which was removed by commit dc67c6b30f36d57b70b70547a30e7a8432540c6f ("mac802154: tx: remove xmit channel context switch"). This patch removes these unnecessary variables and use the current_page and current_channel by wpan_phy struct now. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: iface: remove assign to zeroAlexander Aring
These variables should already be zero, so we remove the extra assign to zero. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: add synchronization handlingAlexander Aring
This patch adds synchronization handling in start and stop driver ops calls. This patch is mostly grab from mac80211 which was introduced by commit ea77f12f2cc0f31168f2e0259e65a22202ac4dc2 ("mac80211: remove tasklet enable/disable"). This is to be sure that we don't run into same issues. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: move local started handlingAlexander Aring
This patch removes the current handling of started boolean. This is actually dead code, because mac802154_netdev_register can't never be called before ieee802154_register_hw. This means that local->started is always be true when mac802154_netdev_register is called. Instead we using this now like mac80211 to indicate that an instance of sdata is running. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: rename running to startedAlexander Aring
This variable should be handled like ieee80211_local struct of mac80211. We rename this variable to started now to have the same name convention. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: rework sdata state change to runningAlexander Aring
This patch reworks the handling for setting the state like mac80211. We use bit's instead a bool variable. The mutex is not needed because it use test and set bits which are atomic operations. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: remove driver ops in wpan-phyAlexander Aring
This patch removes the driver ops callbacks inside of wpan_phy struct. It was used to check if a phy supports this driver ops call. We do this now via hardware flags. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: remove might_sleep from driver layerAlexander Aring
This patch removes all might_sleep calls from driver layer. This handling is already done by mac802154 layer. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: use driver-ops function wrappersAlexander Aring
This patch replaces all directly called driver ops by previous introduced driver-ops function wrappers. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: introduce driver-ops headerAlexander Aring
This patch introduce a driver-ops header file with function wrappers to call the driver ops. These wrappers checking on right context information and warn if optional driver ops are called when these aren't implemented. This behaviour is like mac80211 driver-ops header file, just without function tracing calls. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: ops: declare channel and page as u8Alexander Aring
The range of channel and page fits into an unsigned byte range. This patch changes the set_channel parameter definitions for channel and page to u8. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: declare struct ieee802154_ops as constAlexander Aring
The ieee802154_ops structure should be never changed during runtime. This patch declare this structure as const to avoid a runtime change. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: main: move open and close into ifaceAlexander Aring
These functions can be static inside the iface file, because it's not used anywhere else. This patch moves these functions into iface file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: monitor: merge into iface implementationAlexander Aring
This patch removes the monitor implementation file and put all monitor stuff into iface file. It's now small enough to put all necessary handling into iface. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28Bluetooth: Fix check for direct advertisingJohan Hedberg
These days we allow simultaneous LE scanning and advertising. Checking for whether advertising is enabled or not is therefore not a reliable way to determine whether directed advertising was used to trigger the connection creation. The appropriate place to check (instead of the hdev context) is the connection role that's stored in the hci_conn. This patch fixes such a check in le_conn_timeout() which could otherwise lead to incorrect HCI commands being sent. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 3.16.x
2014-10-28Bluetooth: Fix LE connection timeout deadlockJohan Hedberg
The le_conn_timeout() may call hci_le_conn_failed() which in turn may call hci_conn_del(). Trying to use the _sync variant for cancelling the conn timeout from hci_conn_del() could therefore result in a deadlock. This patch converts hci_conn_del() to use the non-sync variant so the deadlock is not possible. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 3.16.x
2014-10-28Bluetooth: spelling fixesStephen Hemminger
Fix spelling errors in comments. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28Bluetooth: 6lowpan: Fix lockdep splatsJukka Rissanen
When a device ndo_start_xmit() calls again dev_queue_xmit(), lockdep can complain because dev_queue_xmit() is re-entered and the spinlocks protecting tx queues share a common lockdep class. Same issue was fixed for ieee802154 in commit "20e7c4e80dcd" Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28Bluetooth: 6lowpan: Converting rwlocks to use RCUJukka Rissanen
The rwlocks are converted to use RCU. This helps performance as the irq locks are not needed any more. Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28Bluetooth: Revert SMP self-test patchesJohan Hedberg
This reverts commits c6992e9ef2a17e9738b7bb8a03a7fe581a8f9977 and 4cd3362da899a59955146851dd860198b0aaaa75. The reason for the revert is that we cannot have more than one module initialization function and the SMP one breaks the build with modular kernels. As the proper fix for this is right now looking non-trivial it's better to simply revert the problematic patches in order to keep the upstream tree compilable. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27ath9k: use a random MAC address if the EEPROM address is invalidFelix Fietkau
Based on OpenWrt patch by Gabor Juhos Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-27ath9k: allow disabling bands via platform dataFelix Fietkau
Some devices have multiple bands enables in the EEPROM data, even though they are only calibrated for one. Allow platform data to disable unsupported bands. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-27ath9k: add support for endian swap of eeprom from platform dataFelix Fietkau
On some devices (especially little-endian ones), the flash EEPROM data has a different endian, which needs to be detected. Add a flag to the platform data to allow overriding that behavior Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-27ath9k_hw: start initial NF calibration after PA calibration on <AR9003Felix Fietkau
This makes the initial NF calibration less likely to fail. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-27ath9k_hw: do not run NF and periodic calibration at the same timeFelix Fietkau
It can cause inconsistent calibration results or in some cases turn the radio deaf. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-27ath9k: restart hardware after noise floor calibration failureFelix Fietkau
When NF calibration fails, the radio often becomes deaf. The usual hardware hang checks do not detect this, so it's better to issue a reset when that happens. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-27ath9k: clean up debugfs print of reset causesFelix Fietkau
Reduce code duplication Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-27ath9k: fix processing RXORN interruptsFelix Fietkau
The "goto chip_reset" is a bit misleading, because it does not actually issue a chip reset. Instead it is bypassing processing of other interrupts and assumes that the tasklet will issue a chip reset. In the case of RXORN this does not happen, so bypassing processing of other interrupts will simply allow them to fire again. Even if RXORN was triggering a reset, it is not critical enough to need the bypass here. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-27ath9k_hw: remove support for UB124 tx gain tableFelix Fietkau
UB124 is a USB based reference design not supported by ath9k or ath9k_htc. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-27ath9k_hw: make support for PC-OEM cards optionalFelix Fietkau
The initvals use up quite a bit of space, and PC-OEM support is typically not needed on embedded systems Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 22:59:38 +0000