summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-07-11Merge tag 'imx-fixes-5.19-3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.19, round 3: - Fix GPIO property for imx6qdl-ts7970 board. - Fix touchscreen pinctrl for imx6ull-colibri board by moving iomuxc-snvs pin to the correct controller device. - Fix SFP node of fsl-ls1028a to have a required clock property. * tag 'imx-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: colibri-imx6ull: fix snvs pinmux group ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count arm64: dts: ls1028a: Update SFP node to include clock Link: https://lore.kernel.org/r/20220709032716.GA9868@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-08Merge tag 'sunxi-fixes-for-5.19-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes - Fix SPI NOR compatible on Orange Pi Zero * tag 'sunxi-fixes-for-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero Link: https://lore.kernel.org/r/Ysh44qUmdmF6TWS6@kista.localdomain Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-08Merge tag 'sunxi-fixes-for-5.19-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes - fix binding for D1 display pipeline * tag 'sunxi-fixes-for-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: dt-bindings: display: sun4i: Fix D1 pipeline count Link: https://lore.kernel.org/r/YshiPKZRq6NHxPzO@kista.localdomain Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-08Merge tag 'at91-fixes-5.19-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 5.19 #2 It contains 2 DT fixes: - one for SAMA5D2 to fix the i2s1 assigned-clock-parents property - one for kswitch-d10 (LAN966 based) enforcing proper settings on GPIO pins * tag 'at91-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d2: Fix typo in i2s1 node ARM: dts: kswitch-d10: use open drain mode for coma-mode pins Link: https://lore.kernel.org/r/20220708151621.860339-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-08ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi ZeroMichal Suchanek
The device tree should include generic "jedec,spi-nor" compatible, and a manufacturer-specific one. The macronix part is what is shipped on the boards that come with a flash chip. Fixes: 45857ae95478 ("ARM: dts: orange-pi-zero: add node for SPI NOR") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220708174529.3360-1-msuchanek@suse.de
2022-07-08ARM: dts: at91: sama5d2: Fix typo in i2s1 nodeRyan Wanner
Fix typo in i2s1 causing errors in dt binding validation. Change assigned-parrents to assigned-clock-parents to match i2s0 node formatting. Fixes: 1ca81883c557 ("ARM: dts: at91: sama5d2: add nodes for I2S controllers") Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> [claudiu.beznea: use imperative addressing in commit description, remove blank line after fixes tag, fix typo in commit message] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220707215812.193008-1-Ryan.Wanner@microchip.com
2022-07-08Merge tag 'tee-fixes-for-v5.19' of ↵Arnd Bergmann
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes Fixes for TEE subsystem A fix for the recently merged commit ed8faf6c8f8c ("optee: add OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_REGD_ARG"). Two small fixes in comment, repeated words etc. * tag 'tee-fixes-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: tee_get_drvdata(): fix description of return value optee: Remove duplicate 'of' in two places. optee: smc_abi.c: fix wrong pointer passed to IS_ERR/PTR_ERR() Link: https://lore.kernel.org/r/20220708134607.GA901814@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-08tee: tee_get_drvdata(): fix description of return valueMarc Kleine-Budde
This patch fixes the description of tee_get_drvdata()'s return value. It actually returns the driver_data pointer supplied to tee_device_alloc() since the TEE subsystem was added to the kernel. Fixes: 967c9cca2cc5 ("tee: generic TEE subsystem") Cc: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2022-07-08optee: Remove duplicate 'of' in two places.Jiang Jian
file: ./drivers/tee/optee/optee_smc.h line: 192 * a2 Size of of SHM chanegd to * a2 Size of SHM Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2022-07-08ARM: dts: kswitch-d10: use open drain mode for coma-mode pinsMichael Walle
The driver use the coma-mode pins as open-drain. Flag them in the device tree accordingly. This avoids the following error: [ 14.114180] gpio-2007 (coma-mode): enforced open drain please flag it properly in DT/ACPI DSDT/board file Fixes: 46a9556d977e ("ARM: dts: kswitch-d10: enable networking") Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220704150808.1104295-1-michael@walle.cc
2022-07-08ARM: dts: colibri-imx6ull: fix snvs pinmux groupMax Krummenacher
A pin controlled by the iomuxc-snvs pin controller must be specified under the dtb's iomuxc-snvs node. Move the one and only pin of that category from the iomuxc node and set the pinctrl-0 using it accordingly. Fixes: 2aa9d6201949 ("ARM: dts: imx6ull-colibri: add touchscreen device nodes") Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-08optee: smc_abi.c: fix wrong pointer passed to IS_ERR/PTR_ERR()Yang Yingliang
In optee_smc_do_call_with_arg() there is a code path when the argument struct for RPC is passed appended to the primary argument struct. When the address of the RPC struct is retrieved there's an invalid check for success. It should be 'rpc_arg' pass to IS_ERR/PTR_ERR(). Fixes: ed8faf6c8f8c ("optee: add OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_REGD_ARG") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> [jw: added background to the problem] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2022-07-08Merge tag 'reset-fixes-for-v5.19' of git://git.pengutronix.de/pza/linux into ↵Arnd Bergmann
arm/fixes Reset controller fixes for v5.19 Fix the MAINTAINERS entry for the Synopsys AXS10x reset controller driver, which still points to a nonexistent .txt file after the device tree binding .yaml conversion. Also, fix the devm_reset_control_bulk_get_optional_exclusive() call, which was defective since its introduction due to a copy & paste error. * tag 'reset-fixes-for-v5.19' of git://git.pengutronix.de/pza/linux: reset: Fix devm bulk optional exclusive control getter MAINTAINERS: rectify entry for SYNOPSYS AXS10x RESET CONTROLLER DRIVER Link: https://lore.kernel.org/r/20220707101344.3329314-1-p.zabel@pengutronix.de Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-08MAINTAINERS: add polarfire rng, pci and clock driversConor Dooley
Hardware random, PCI and clock drivers for the PolarFire SoC have been upstreamed but are not covered by the MAINTAINERS entry, so add them. Daire is the author of the clock & PCI drivers, so add him as a maintainer in place of Lewis. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220707142041.4096246-1-conor.dooley@microchip.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-07MAINTAINERS: mark ARM/PALM TREO SUPPORT orphanLukas Bulwahn
The email address sleep_walker@suse.com and the url http://hackndev.com/, provided in the ARM/PALM TREO SUPPORT section, are not reachable anymore. Make this machine support orphan, and give somebody the chance to step up. Move the maintainer into CREDITS to keep the attribution to his work. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-06Merge tag 'v5.19-rockchip-socfixes1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Add a missing of_node_put in suspend code error path. * tag 'v5.19-rockchip-socfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: rockchip: Add missing of_node_put() in rockchip_suspend_init() Link: https://lore.kernel.org/r/7527945.6fTUFtlzNn@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-06Merge tag 'v5.19-rockchip-dtsfixes1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes rk3399 vdu clock-rate fix, otg port fix on Quartz64-A and ethernet fix on Quartz64-B (actual production model) * tag 'v5.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Assign RK3399 VDU clock rate arm64: dts: rockchip: Fix Quartz64-A dwc3 otg port behavior arm64: dts: rockchip: Fix ethernet on production Quartz64-B Link: https://lore.kernel.org/r/7723415.29KlJPOoH8@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-05ARM: dts: imx6qdl-ts7970: Fix ngpio typo and countKris Bahnsen
Device-tree incorrectly used "ngpio" which caused the driver to fallback to 32 ngpios. This platform has 62 GPIO registers. Fixes: 9ff8e9fccef9 ("ARM: dts: TS-7970: add basic device tree") Signed-off-by: Kris Bahnsen <kris@embeddedTS.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-05arm64: dts: ls1028a: Update SFP node to include clockSean Anderson
The clocks property is now mandatory. Add it to avoid warning message. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Michael Walle <michael@walle.cc> Fixes: eba5bea8f37f ("arm64: dts: ls1028a: add efuse node") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-04dt-bindings: display: sun4i: Fix D1 pipeline countSamuel Holland
When adding the bindings for the D1 display engine, I missed the condition for the number of pipelines. D1 has two mixers, so it will have two pipeline references. Fixes: ae5a5d26c15c ("dt-bindings: display: Add D1 display engine compatibles") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220702032921.22433-1-samuel@sholland.org
2022-07-04Merge tag 'stm32-dt-for-v5.19-fixes-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v5.19, round 2 Highlights: ----------- -Fixes STM32MP15: - Add missing usbh clock and fix clk order for usbh to avoid PLL issue. - Fix SCMI version: use scmi regulator and update missing SCMI clocks to be able to correcly boot. * tag 'stm32-dt-for-v5.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15 ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board ARM: dts: stm32: use the correct clock source for CEC on stm32mp151 ARM: dts: stm32: fix pwr regulators references to use scmi Link: https://lore.kernel.org/r/1259e082-a3a4-96a5-ec9c-05dbb893a746@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-04soc: qcom: smem: use correct format charactersBill Wendling
When compiling with -Wformat, clang emits the following warnings: drivers/soc/qcom/smem.c:847:41: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] dev_err(smem->dev, "bad host %hu\n", remote_host); ~~~ ^~~~~~~~~~~ %u ./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err' dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__) ~~~ ^~~~~~~~~~~ ./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap' _p_func(dev, fmt, ##__VA_ARGS__); \ ~~~ ^~~~~~~~~~~ drivers/soc/qcom/smem.c:852:47: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] dev_err(smem->dev, "duplicate host %hu\n", remote_host); ~~~ ^~~~~~~~~~~ %u ./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err' dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__) ~~~ ^~~~~~~~~~~ ./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap' _p_func(dev, fmt, ##__VA_ARGS__); \ ~~~ ^~~~~~~~~~~ The types of these arguments are unconditionally defined, so this patch updates the format character to the correct one and change type of remote_host to "u16" to match with other types. Signed-off-by: Bill Wendling <morbo@google.com> Tested-by: Justin Stitt <jstitt007@gmail.com> Reviewed-by: Justin Stitt <jstitt007@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-04ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15Fabrice Gasnier
The USBH composed of EHCI and OHCI controllers needs the PHY clock to be initialized first, before enabling (gating) them. The reverse is also required when going to suspend. So, add USBPHY clock as 1st entry in both controllers, so the USBPHY PLL gets enabled 1st upon controller init. Upon suspend/resume, this also makes the clock to be disabled/re-enabled in the correct order. This fixes some IRQ storm conditions seen when going to low-power, due to PHY PLL being disabled before all clocks are cleanly gated. Fixes: 949a0c0dec85 ("ARM: dts: stm32: add USB Host (USBH) support to stm32mp157c") Fixes: db7be2cb87ae ("ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-07-04ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMIGabriel Fernandez
Delete the node fixed clock managed by secure world with SCMI. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-07-04ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 boardGabriel Fernandez
LSE clock is provided by SCMI. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-07-04ARM: dts: stm32: use the correct clock source for CEC on stm32mp151Gabriel Fernandez
The peripheral clock of CEC is not LSE but CEC. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-07-04ARM: dts: stm32: fix pwr regulators references to use scmiEtienne Carriere
Fixes stm32mp15*-scmi DTS files introduced in [1] to also access PWR regulators through SCMI service. This is needed since enabling secure only access to RCC clock and reset controllers also enables secure access only on PWR voltage regulators reg11, reg18 and usb33 hence these must also be accessed through SCMI Voltage Domain protocol. This change applies on commit [2] that already corrects issues from commit [1]. Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Link: [1] https://lore.kernel.org/linux-arm-kernel/20220422150952.20587-7-alexandre.torgue@foss.st.com Link: [2] https://lore.kernel.org/linux-arm-kernel/20220613071920.5463-1-alexandre.torgue@foss.st.com Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2022-07-03Merge tag 'qcom-arm64-fixes-for-5.19' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 DT fixes for v5.19 This removes duplicate includes in the sc7180-trogdor files, which accidentally ended up disabling nodes intended to be enabled. It corrects identifiers for CPU6/7 on MSM8994. On SM8450 the UFS node's interconnects property is updated to match the #interconnect-cells, avoiding sync_state issues and the GIC ITS is defined, to correct the references from the PCIe nodes. On SDM845 the display subsystem's AHB clock is corrected and on msm8992 devices, the supplies for lvs 1 and 2 are correctly specified. Lastly, a welcome addition of Konrad as reviewer for the Qualcomm SoC. * tag 'qcom-arm64-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo MAINTAINERS: Add myself as a reviewer for Qualcomm ARM/64 support arm64: dts: qcom: sdm845: use dispcc AHB clock for mdss node arm64: dts: qcom: sm8450 add ITS device tree node arm64: dts: qcom: msm8994: Fix CPU6/7 reg values arm64: dts: qcom: sm8450: fix interconnects property of UFS node arm64: dts: qcom: Remove duplicate sc7180-trogdor include on lazor/homestar Link: https://lore.kernel.org/r/20220703030208.408109-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-01Merge tag 'amlogic-arm-for-v5.20' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes Amlogic ARM mach-meson changes for v5.20: - Fix refcount leak in meson_smp_prepare_cpus * tag 'amlogic-arm-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: meson: Fix refcount leak in meson_smp_prepare_cpus Link: https://lore.kernel.org/r/cbf6bcb5-c7be-40fe-4436-4578c9d6c532@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-01Merge tag 'scmi-fixes-5.19-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm SCMI firmware driver fixes for v5.19 Few more fixes to address: 1. Issue reported on Juno with HDLCD clock which turned out to be yet another firmware issue. The firmware is not conformant to the spec and we now have to workaround as this may be copied to other platforms as well. The spec expects to return size of 3 for a range clock rate description while the firmware returns 1. We have other ways to validate all the 3 entries the driver reads are polpulated and we use the same to workaround this firmware bug. 2. Optee transport not setting the correct reponse length which is similar to the one reported earlier on Rockchip platform. 3. Drop the usage of the deprecated ida_simple_{get,remove} and migrate to the ida_{alloc,free} * tag 'scmi-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API firmware: arm_scmi: Fix response size warning for OPTEE transport firmware: arm_scmi: Relax CLOCK_DESCRIBE_RATES out-of-spec checks Link: https://lore.kernel.org/r/20220628133315.699803-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-01Merge tag 'imx-fixes-5.19-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.19, round 2: - Fix the SDIO description for imx7d-smegw01 board to ensure there is no communication made at 1.8V. - Fix pgc_ispdwp power-domain clock, which should be IMX8MP_CLK_MEDIA_ISP_ROOT. - Re-enable framebuffer support in mxs_defconfig to fix a Kconfig regression. - A series from Peng Fan (and Sherry Sun) fixing various pads on i.MX8MP based boards to leave reserved bits untouched. * tag 'imx-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings arm64: dts: imx8mp-phyboard-pollux-rdk: correct uart pad settings arm64: dts: imx8mp-venice-gw74xx: correct pad settings arm64: dts: imx8mp-evk: correct I2C3 pad settings arm64: dts: imx8mp-evk: correct I2C1 pad settings arm64: dts: imx8mp-evk: correct I2C5 pad settings arm64: dts: imx8mp-evk: correct vbus pad settings arm64: dts: imx8mp-evk: correct eqos pad settings arm64: dts: imx8mp-evk: correct vbus pad settings arm64: dts: imx8mp-evk: correct gpio-led pad settings arm64: dts: imx8mp-evk: correct the uart2 pinctl value arm64: dts: imx8mp-evk: correct mmc pad settings ARM: mxs_defconfig: Enable the framebuffer arm64: dts: imx8mp: correct clock of pgc_ispdwp ARM: dts: imx7d-smegw01: Fix the SDIO description Link: https://lore.kernel.org/r/20220629021244.GL819983@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-01Merge tag 'at91-fixes-5.19' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 5.19 It contains 3 SoC fixes and 2 DT fixes: SoC: - fix the wakeup from RTC and RTT for ULP1 mode - fix section mismatch warning - fix SAM9X60 SiP detection DT: - fixes the EEPROMs compatibles for sama5d2_icp and sam9x60ek and EEPROM size for sam9x60ek * tag 'at91-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: pm: Mark at91_pm_secure_init as __init ARM: at91: fix soc detection for SAM9X60 SiPs ARM: dts: at91: sama5d2_icp: fix eeprom compatibles ARM: dts: at91: sam9x60ek: fix eeprom compatible and size ARM: at91: pm: use proper compatibles for sama7g5's rtc and rtt ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt ARM: at91: pm: use proper compatible for sama5d2's rtc Link: https://lore.kernel.org/r/20220628135130.3114878-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-01soc: ixp4xx/npe: Fix unused match warningLinus Walleij
The kernel test robot found this inconsistency: drivers/soc/ixp4xx/ixp4xx-npe.c:737:34: warning: 'ixp4xx_npe_of_match' defined but not used [-Wunused-const-variable=] 737 | static const struct of_device_id ixp4xx_npe_of_match[] = { This is because the match is enclosed in the of_match_ptr() which compiles into NULL when OF is disabled and this is unnecessary. Fix it by dropping of_match_ptr() around the match. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220626074315.61209-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-06-29reset: Fix devm bulk optional exclusive control getterSerge Semin
Most likely due to copy-paste mistake the device managed version of the denoted reset control getter has been implemented with invalid semantic, which can be immediately spotted by having "WARN_ON(shared && acquired)" warning in the system log as soon as the method is called. Anyway let's fix it by altering the boolean arguments passed to the __devm_reset_control_bulk_get() method from - shared = true, optional = false, acquired = true to + shared = false, optional = true, acquired = true That's what they were supposed to be in the first place (see the non-devm version of the same method: reset_control_bulk_get_optional_exclusive()). Fixes: 48d71395896d ("reset: Add reset_control_bulk API") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220624141853.7417-2-Sergey.Semin@baikalelectronics.ru
2022-06-29MAINTAINERS: rectify entry for SYNOPSYS AXS10x RESET CONTROLLER DRIVERLukas Bulwahn
Commit 820f722c05dd ("dt-bindings: reset: snps,axs10x-reset: Convert to yaml") converts snps,axs10x-reset.txt to yaml, but misses to adjust its reference in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Repair this file reference in SYNOPSYS AXS10x RESET CONTROLLER DRIVER. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220601082239.12009-1-lukas.bulwahn@gmail.com
2022-06-28ARM: at91: pm: Mark at91_pm_secure_init as __initFabio Estevam
at91_pm_secure_init() is used inside sama5d2_pm_init(), which has the __init notation. Pass the __init notation to at91_pm_secure_init() as well to fix the following section mismatch warning: WARNING: modpost: vmlinux.o(.text.unlikely+0x2138): Section mismatch in reference from the function at91_pm_secure_init() to the (unknown reference) .init.rodata:(unknown) Fixes: f2f5cf78a333 ("ARM: at91: pm: add support for sama5d2 secure suspend") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220622114810.1186330-1-festevam@gmail.com
2022-06-28ARM: at91: fix soc detection for SAM9X60 SiPsMihai Sain
Fix SoC detection for SAM9X60 SiPs: SAM9X60D5M SAM9X60D1G SAM9X60D6K Fixes: af3a10513cd6 ("drivers: soc: atmel: add per soc id and version match masks") Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220616081344.1978664-1-claudiu.beznea@microchip.com
2022-06-28ARM: dts: at91: sama5d2_icp: fix eeprom compatiblesEugen Hristev
The eeprom memories on the board are microchip 24aa025e48, which are 2 Kbits and are compatible with at24c02 not at24c32. Fixes: 68a95ef72cefe ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220607090455.80433-2-eugen.hristev@microchip.com
2022-06-28ARM: dts: at91: sam9x60ek: fix eeprom compatible and sizeEugen Hristev
The board has a microchip 24aa025e48 eeprom, which is a 2 Kbits memory, so it's compatible with at24c02 not at24c32. Also the size property is wrong, it's not 128 bytes, but 256 bytes. Thus removing and leaving it to the default (256). Fixes: 1e5f532c27371 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220607090455.80433-1-eugen.hristev@microchip.com
2022-06-28ARM: at91: pm: use proper compatibles for sama7g5's rtc and rttClaudiu Beznea
Use proper compatible strings for SAMA7G5's RTC and RTT IPs. These are necessary for configuring wakeup sources for ULP1 PM mode. Fixes: 6501330f9f5e ("ARM: at91: pm: add pm support for SAMA7G5") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220523092421.317345-4-claudiu.beznea@microchip.com
2022-06-28ARM: at91: pm: use proper compatibles for sam9x60's rtc and rttClaudiu Beznea
Use proper compatible strings for SAM9X60's RTC and RTT IPs. These are necessary for configuring wakeup sources for ULP1 PM mode. Fixes: eaedc0d379da ("ARM: at91: pm: add ULP1 support for SAM9X60") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220523092421.317345-3-claudiu.beznea@microchip.com
2022-06-28ARM: at91: pm: use proper compatible for sama5d2's rtcClaudiu Beznea
Use proper compatible strings for SAMA5D2's RTC IPs. This is necessary for configuring wakeup sources for ULP1 PM mode. Fixes: d7484f5c6b3b ("ARM: at91: pm: configure wakeup sources for ULP1 mode") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220523092421.317345-2-claudiu.beznea@microchip.com
2022-06-27arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typoStephan Gerhold
"make dtbs_check" complains about the missing "-supply" suffix for vdd_lvs1_2 which is clearly a typo, originally introduced in the msm8994-smd-rpm.dtsi file and apparently later copied to msm8992-xiaomi-libra.dts: msm8992-lg-bullhead-rev-10/101.dtb: pm8994-regulators: 'vdd_lvs1_2' does not match any of the regexes: '.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+' From schema: regulator/qcom,smd-rpm-regulator.yaml msm8992-xiaomi-libra.dtb: pm8994-regulators: 'vdd_lvs1_2' does not match any of the regexes: '.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+' From schema: regulator/qcom,smd-rpm-regulator.yaml Reported-by: Rob Herring <robh@kernel.org> Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Fixes: f3b2c99e73be ("arm64: dts: Enable onboard SDHCI on msm8992") Fixes: 0f5cdb31e850 ("arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree") Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220627135938.2901871-1-stephan.gerhold@kernkonzept.com
2022-06-27firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx APIBo Liu
Replace the deprecated ida_simple_{get,remove} with ida_{alloc,free}. Link: https://lore.kernel.org/r/20220616055052.4559-1-liubo03@inspur.com Signed-off-by: Bo Liu <liubo03@inspur.com> [sudeep.holla: Replace ida_alloc_min with ida_alloc as suggested by Cristian] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-06-27firmware: arm_scmi: Fix response size warning for OPTEE transportVincent Guittot
Some protocols check the response size with the expected value but optee shared memory doesn't return such size whereas it is available in the optee output buffer. As an example, the base protocol compares the response size with the expected result when requesting the list of protocol which triggers a warning with optee shared memory: arm-scmi firmware:scmi0: Malformed reply - real_sz:116 calc_sz:4 (loop_num_ret:4) Save the output buffer length and use it when fetching the answer. Link: https://lore.kernel.org/r/20220624074549.3298-1-vincent.guittot@linaro.org Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-06-27arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settingsPeng Fan
BIT3 and BIT0 are reserved bits, should not touch. Fixes: aec8ad34f7f2 ("arm64: dts: imx8mp: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settingsPeng Fan
BIT3 and BIT0 are reserved bits, should not touch. Fixes: 88f7f6bcca37 ("arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settingsPeng Fan
BIT3 and BIT0 are reserved bits, should not touch. Fixes: 6f96852619d5 ("arm64: dts: freescale: Add support EQOS MAC on phyBOARD-Pollux-i.MX8MP") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27arm64: dts: imx8mp-phyboard-pollux-rdk: correct uart pad settingsPeng Fan
BIT3 and BIT0 are reserved bits, should not touch. Fixes: 846f752866bd ("arm64: dts: imx8mp-phyboard-pollux-rdk: Change debug UART") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-27arm64: dts: imx8mp-venice-gw74xx: correct pad settingsPeng Fan
According to RM bit layout, BIT3 and BIT0 are reserved. 8 7 6 5 4 3 2 1 0 PE HYS PUE ODE FSEL X DSE X Should not set reserved bit. Fixes: 7899eb6cb15d ("arm64: dts: imx: Add i.MX8M Plus Gateworks gw7400 dts support") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 03:50:12 +0000