summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-11-26iio: light: ltrf216a: Return floating point valuesShreeya Patel
For better precision of input light intesity, return floating point values through sysfs instead of an integer value Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com> Link: https://lore.kernel.org/r/20231107192005.285534-1-shreeya.patel@collabora.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-26iio: imu: inv_mpu6050: return callee's error code rather than -EINVALSu Hui
regmap_bulk_write()/regmap_bulk_read() return zero or negative error code, return the callee's error code is better than '-EINVAL'. Signed-off-by: Su Hui <suhui@nfschina.com> Link: https://lore.kernel.org/r/20231030020752.67630-1-suhui@nfschina.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-26iio: amplifiers: hmc425a: add support for ADRF5740 AttenuatorAna-Maria Cusco
This adds support for the Analog Devices ADRF5740 2 dB LSB, 4-Bit, Silicon Digital Attenuator, 10 MHz to 60 GHz. The default (maximum) gain is also set at probe time, with GPIO lines driven high to achieve maximum gain, in contrast to other devices where GPIOs need to be driven low. Signed-off-by: Ana-Maria Cusco <ana-maria.cusco@analog.com> Link: https://lore.kernel.org/r/20231113102535.51074-2-anamaria.cuscoo@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-26dt-bindings: iio: hmc425a: add entry for ADRF5740 AttenuatorAna-Maria Cusco
The ADRF5740 is a silicon, 4-bit digital attenuator with 22 dB attenuation control range in 2 dB steps. Signed-off-by: Ana-Maria Cusco <ana-maria.cusco@analog.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231113102535.51074-3-anamaria.cuscoo@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-25MAINTAINERS: improve section MICROCHIP MCP3564 ADC DRIVERLukas Bulwahn
Commit 33ec3e5fc1ea ("iio: adc: adding support for MCP3564 ADC") adds a new iio driver and corresponding MAINTAINERS section. It however uses spaces instead of a single tab for all the entries in that MAINTAINERS section. Although, the get_maintainer.pl script handles spaces instead of tabs silently, the MAINTAINERS will quickly get into a messy state with different indentations throughout the file. So, the checkpatch.pl script complains when spaces instead of a single tab are used. Fix this recently added section using tabs instead of spaces. Further, add the driver's ABI documentation file to this section as well. Fixes: 33ec3e5fc1ea ("iio: adc: adding support for MCP3564 ADC") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20231122075629.21411-1-lukas.bulwahn@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: buffer: document known issueMatti Vaittinen
Add documentation explaining why the code which scans all available scan masks is checking only a single long worth of bits even though the code was intended to be supporting masks wider than single long. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/ef61c2c1e9a1c5e9f713f656871fdcb1652afdc2.1697452986.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: sanity check available_scan_masks arrayMatti Vaittinen
When IIO goes through the available scan masks in order to select the best suiting one, it will just accept the first listed subset of channels which meets the user's requirements. If driver lists a mask which is a subset of some of the masks previously in the array of avaliable_scan_masks, then the latter one will never be selected. Add a warning if driver registers masks which can't be used due to the available_scan_masks-array ordering. Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/e55ef0b26a6d3b323bab24920c131c79a01ba08e.1697452986.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' propertyRamona Gradinariu
The adis16460 device requires a stall time between SPI transactions (during which the chip select is inactive), with a minimum value equal to 16 microseconds. This commit adds 'spi-cs-inactive-delay-ns' property, which should indicate the stall time between consecutive SPI transactions. The specified minimum time may not be sufficient for all configurations. Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231027140358.328699-4-ramona.gradinariu@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16dt-bindings: adis16475: Add 'spi-cs-inactive-delay-ns' propertyRamona Gradinariu
The devices supported by adis16475 driver require a stall period between SPI transactions (during which the chip select is inactive), with a minimum value equal to 16 microseconds, thus adding 'spi-cs-inactive-delay-ns' property, which should indicate the stall time between consecutive SPI transactions. The specified minimum time may not be sufficient for all configurations. Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231027140358.328699-3-ramona.gradinariu@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: imu: adis: Use spi cs inactive delayRamona Gradinariu
A delay is needed each time the chip selected becomes inactive, even after burst data readings are performed. Currently, there is no delay added after a burst reading and in case a new SPI transfer is performed before the needed delay, the adis device becomes unresponsive until reset. This commit is adding the needed delay directly to the spi driver, using the cs_inactive parameter, in case it is not set and is removing the additional chip select change delay present in adis APIs to remove the double delay. Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com> Link: https://lore.kernel.org/r/20231027140358.328699-2-ramona.gradinariu@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio/imu: inv_icm42600: Use max() helper macrosBragatheswaran Manickavel
Use the standard max() helper macros instead of direct variable comparison using if/else blocks or ternary operator. Change identified using minmax.cocci Coccinelle semantic patch. Signed-off-by: Bragatheswaran Manickavel <bragathemanick0908@gmail.com> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20231027094410.3706-1-bragathemanick0908@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: temperature: Add MCP9600 thermocouple EMF converterAndrew Hepp
Add support for the MCP9600 thermocouple electromotive force converter. The sensor has integrated cold junction compensation and a typical accuracy of 0.5 degrees Celsius. The driver supports a resolution of 0.0625 degrees Celsius. Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/MCP960X-Data-Sheet-20005426.pdf Signed-off-by: Andrew Hepp <andrew.hepp@ahepp.dev> Link: https://lore.kernel.org/r/20231025233153.5454-2-andrew.hepp@ahepp.dev Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16dt-bindings: iio: Add MCP9600 thermocouple EMF converterAndrew Hepp
Add support for the MCP9600 thermocouple electromotive force converter. The sensor has integrated cold junction compensation and a typical accuracy of 0.5 degrees Celsius. The driver supports a resolution of 0.0625 degrees Celsius. Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/MCP960X-Data-Sheet-20005426.pdf Signed-off-by: Andrew Hepp <andrew.hepp@ahepp.dev> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231025233153.5454-1-andrew.hepp@ahepp.dev Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: imu: Fix spelling mistake "accelrometer" -> "accelerometer"Colin Ian King
There are two spelling mistakes in dev_err messages. Fix them. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Jagath Jog J <jagathjog1996@gmail.com> Link: https://lore.kernel.org/r/20231023081054.617292-1-colin.i.king@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: pressure: bmp280: Add support for BMP390Angel Iglesias
Add BMP390 device ID to the supported IDs on bmp380 sensor family Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Link: https://lore.kernel.org/r/d6a9e9ca4670c7401545d0d086cd3059e29044c8.1697994521.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: pressure: bmp280: Allow multiple chips id per family of devicesAngel Iglesias
Improve device detection in certain chip families known to have various chip IDs. When no ID matches, give a warning but follow along what device said on the firmware side and try to configure it. Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Link: https://lore.kernel.org/r/eade22d11e9de4405ea19fdaa5a8249143ae94df.1697994521.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: pressure: bmp280: Rearrange vars in reverse xmas tree orderAngel Iglesias
Small cleanup reordering local variable declarations following reverse christmas tree convention. Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/bb63a996eb9c4555bf83471770f0169d2627e79c.1697994521.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: pressure: bmp280: Use spi_get_device_match_data()Angel Iglesias
Use the spi_get_device_match_data() helper instead of device_get_match_data() and the fallback match_id logic. Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/9ea8ac90b2b8a8cf45803d0435243c0bee009b37.1697994521.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: pressure: bmp280: Use i2c_get_match_data()Biju Das
Replace device_get_match_data() and id lookup for retrieving match data by i2c_get_match_data(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/0554ddae62ba04ccacf58c2de04ec598c876665e.1697994521.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16MAINTAINERS: correct file entry in BOSCH SENSORTEC BMI323 IMU IIO DRIVERLukas Bulwahn
Commit b512c767e7bc ("iio: imu: Add driver for BMI323 IMU") adds the MAINTAINERS section BOSCH SENSORTEC BMI323 IMU IIO DRIVER and refers to a non-existing device-tree file. Probably, this mistake was introduced by copying from the BOSCH SENSORTEC BMA400 ACCELEROMETER IIO DRIVER section and missing to adjust the file entry properly. This is however easily caught, as the script ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. The related commit 77583938740e ("dt-bindings: iio: imu: Add Bosch BMI323") adds bosch,bmi323.yaml, so refer to that intended file instead. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Jagath Jog J <jagathjog1996@gmail.com> Link: https://lore.kernel.org/r/20231025091550.21052-1-lukas.bulwahn@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16MAINTAINERS: correct file entry IIO LIGHT SENSOR GAIN-TIME_SCALE HELPERSAmit Dhingra
Commit ca11e4a35154 ("MAINTAINERS: Add IIO gain-time-scale helpers"), updates the MAINTAINERS file. However the files listed do not exist. These presumably come from commit 38416c28e168 ("iio: light: Add gain-time-scale helpers") Fix the entries. Found by ./scripts/get_maintainer.pl --self-test=patterns Fixes: ca11e4a35154 ("MAINTAINERS: Add IIO gain-time-scale helpers") Signed-off-by: Amit Dhingra <mechanicalamit@gmail.com> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/CAO=gReFVhp7QK_XZRBO5vbv6fmFb4BdsZeQPSzWvuiz9UeQekA@mail.gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: bu27008: Add illuminance channelMatti Vaittinen
The RGB + IR data can be used to calculate the illuminance value (luxes). Implement the equation obtained from the ROHM HW colleagues and add a raw light data channel outputting illuminance values in (nano) Luxes. Both the read_raw and buffering values are supported, with the limitation that buffering is only allowed when a suitable scan-mask is used. (RGB+IR, no clear). The equation has been developed by ROHM HW colleagues for open air sensor. Adding any lens to the sensor is likely to impact to used c1, c2, c3 coefficients. Also, the output values have only been tested on BU27008. According to the HW colleagues, the very same equation should work on BU27010 as well. Calculate and output illuminance values from BU27008 and BU27010. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/ZTJcOxSb/WHzdN8h@dc78bmyyyyyyyyyyyyydt-3.rev.dnainternet.fi Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: pressure: fix some word spelling errorsLi peiyu
They are appear to be spelling mistakes, drivers/iio/pressure/bmp280.h:413 endianess->endianness drivers/iio/pressure/bmp280-core.c:923 dregrees->degrees drivers/iio/pressure/bmp280-core.c:1388 reescale->rescale drivers/iio/pressure/bmp280-core.c:1415 reescale->rescale Signed-off-by: Li peiyu <579lpy@gmail.com> Link: https://lore.kernel.org/r/20231021070903.6051-1-579lpy@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16mailmap: Change email mapping from previous employersMatt Ranostay
Signed-off-by: Matt Ranostay <matt@ranostay.sg> Link: https://lore.kernel.org/r/20231021085250.21431-1-matt@ranostay.sg Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: proximity: sx9324: Switch to device_property_match_property_string()Andy Shevchenko
Replace open coded device_property_match_property_string(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230808162800.61651-7-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: magnetometer: tmag5273: Switch to device_property_match_property_string()Andy Shevchenko
Replace open coded device_property_match_property_string(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230808162800.61651-6-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: frequency: admv1014: Switch to device_property_match_property_string()Andy Shevchenko
Replace open coded device_property_match_property_string(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230808162800.61651-5-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: frequency: adf4377: Switch to device_property_match_property_string()Andy Shevchenko
Replace open coded device_property_match_property_string(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230808162800.61651-4-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16device property: Add fwnode_property_match_property_string()Andy Shevchenko
Sometimes the users want to match the single value string property against an array of predefined strings. Create a helper for them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20230808162800.61651-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16device property: Use fwnode_property_string_array_count()Andy Shevchenko
Use fwnode_property_string_array_count() instead of open coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20230808162800.61651-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: resolver: ad2s1210: add reset gpio supportDavid Lechner
This adds support for the optional reset gpio to the ad2s1210 resolver driver. If the gpio is present in the device tree, it is toggled during driver probe before the reset of the device initialization. As per the devicetree bindings, it is expected for the gpio to configured as active low. Suggested-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: David Lechner <dlechner@baylibre.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20231016154311.38547-1-dlechner@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: resolver: ad2s1210: add support for adi,fixed-modeDavid Lechner
It is possible to use the AD2S1210 with hardwired mode pins (A0 and A1). According to the devicetree bindings, in this case the adi,fixed-mode property will specify which of the 3 possible modes the mode pins are hardwired for and the gpio-modes property is not allowed. This adds support for the case where the mode pins are hardwired for config mode. In this configuration, the position and value must be read from the config register. The case of hardwired position or velocity mode is not supported as there would be no way to configure the device. Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231016135423.16808-1-dlechner@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: imu: Add driver for BMI323 IMUJagath Jog J
The Bosch BMI323 is a 6-axis low-power IMU that provide measurements for acceleration, angular rate, and temperature. This sensor includes motion-triggered interrupt features, such as a step counter, tap detection, and activity/inactivity interrupt capabilities. The driver supports various functionalities, including data ready, FIFO data handling, and events such as tap detection, step counting, and activity interrupts. Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com> Link: https://lore.kernel.org/r/20231013034808.8948-3-jagathjog1996@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16dt-bindings: iio: imu: Add Bosch BMI323Jagath Jog J
Add devicetree description document for Bosch BMI323, a 6-Axis IMU. Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231013034808.8948-2-jagathjog1996@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: adc: Add driver support for MAX34408/9Ivan Mikhaylov
The MAX34408/MAX34409 are two- and four-channel current monitors that are configured and monitored with a standard I2C/SMBus serial interface. Each unidirectional current sensor offers precision high-side operation with a low full-scale sense voltage. The devices automatically sequence through two or four channels and collect the current-sense samples and average them to reduce the effect of impulse noise. The raw ADC samples are compared to user-programmable digital thresholds to indicate overcurrent conditions. Overcurrent conditions trigger a hardware output to provide an immediate indication to shut down any necessary external circuitry. Add as ADC driver which only supports current monitoring for now. Link: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX34408-MAX34409.pdf Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com> Link: https://lore.kernel.org/r/20231014211254.16719-3-fr0st61te@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16dt-bindings: adc: provide max34408/9 device tree binding documentIvan Mikhaylov
The hardware binding for i2c current monitoring device with overcurrent control. Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231014211254.16719-2-fr0st61te@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-12Linux 6.7-rc1v6.7-rc1Linus Torvalds
2023-11-12wifi: iwlwifi: fix system commands group orderingMiri Korenblit
The commands should be sorted inside the group definition. Fix the ordering so we won't get following warning: WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg)) Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/ Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/ Fixes: b6e3d1ba4fcf ("wifi: iwlwifi: mvm: implement new firmware API for statistics") Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com> Tested-by: Damian Tometzki <damian@riscv-rocks.de> Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-11-12Merge tag 'parisc-for-6.7-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - Include the upper 5 address bits when inserting TLB entries on a 64-bit kernel. On physical machines those are ignored, but in qemu it's nice to have them included and to be correct. - Stop the 64-bit kernel and show a warning if someone tries to boot on a machine with a 32-bit CPU - Fix a "no previous prototype" warning in parport-gsc * tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Prevent booting 64-bit kernels on PA1.x machines parport: gsc: mark init function static parisc/pgtable: Do not drop upper 5 address bits of physical address
2023-11-12Merge tag 'loongarch-6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - support PREEMPT_DYNAMIC with static keys - relax memory ordering for atomic operations - support BPF CPU v4 instructions for LoongArch - some build and runtime warning fixes * tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: selftests/bpf: Enable cpu v4 tests for LoongArch LoongArch: BPF: Support signed mod instructions LoongArch: BPF: Support signed div instructions LoongArch: BPF: Support 32-bit offset jmp instructions LoongArch: BPF: Support unconditional bswap instructions LoongArch: BPF: Support sign-extension mov instructions LoongArch: BPF: Support sign-extension load instructions LoongArch: Add more instruction opcodes and emit_* helpers LoongArch/smp: Call rcutree_report_cpu_starting() earlier LoongArch: Relax memory ordering for atomic operations LoongArch: Mark __percpu functions as always inline LoongArch: Disable module from accessing external data directly LoongArch: Support PREEMPT_DYNAMIC with static keys
2023-11-12Merge tag 'powerpc-6.7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Finish a refactor of pgprot_framebuffer() which dependend on some changes that were merged via the drm tree - Fix some kernel-doc warnings to quieten the bots Thanks to Nathan Lynch and Thomas Zimmermann. * tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code powerpc: Remove file parameter from phys_mem_access_prot() powerpc/machdep: Remove trailing whitespaces
2023-11-11Merge tag '6.7-rc-smb3-client-fixes-part2' of ↵Linus Torvalds
git://git.samba.org/sfrench/cifs-2.6 Pull smb client fixes from Steve French: - ctime caching fix (for setxattr) - encryption fix - DNS resolver mount fix - debugging improvements - multichannel fixes including cases where server stops or starts supporting multichannel after mount - reconnect fix - minor cleanups * tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number for cifs.ko cifs: handle when server stops supporting multichannel cifs: handle when server starts supporting multichannel Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO smb3: allow dumping session and tcon id to improve stats analysis and debugging smb: client: fix mount when dns_resolver key is not available smb3: fix caching of ctime on setxattr smb3: minor cleanup of session handling code cifs: reconnect work should have reference on server struct cifs: do not pass cifs_sb when trying to add channels cifs: account for primary channel in the interface list cifs: distribute channels across interfaces based on speed cifs: handle cases where a channel is closed smb3: more minor cleanups for session handling routines smb3: minor RDMA cleanup cifs: Fix encryption of cleared, but unset rq_iter data buffers
2023-11-10Merge tag 'probes-fixes-v6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - Documentation update: Add a note about argument and return value fetching is the best effort because it depends on the type. - objpool: Fix to make internal global variables static in test_objpool.c. - kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the same prototypes in asm/kprobes.h for some architectures, but some of them are missing the prototype and it causes a warning. So move the prototype into linux/kprobes.h. - tracing: Fix to check the tracepoint event and return event at parsing stage. The tracepoint event doesn't support %return but if $retval exists, it will be converted to %return silently. This finds that case and rejects it. - tracing: Fix the order of the descriptions about the parameters of __kprobe_event_gen_cmd_start() to be consistent with the argument list of the function. * tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/kprobes: Fix the order of argument descriptions tracing: fprobe-event: Fix to check tracepoint event and return kprobes: unify kprobes_exceptions_nofify() prototypes lib: test_objpool: make global variables static Documentation: tracing: Add a note about argument and retval access
2023-11-10Merge tag 'fbdev-for-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes and cleanups from Helge Deller: - fix double free and resource leaks in imsttfb - lots of remove callback cleanups and section mismatch fixes in omapfb, amifb and atmel_lcdfb - error code fix and memparse simplification in omapfb * tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits) fbdev: fsl-diu-fb: mark wr_reg_wa() static fbdev: amifb: Convert to platform remove callback returning void fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning fbdev: hyperv_fb: fix uninitialized local variable use fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void fbdev: omapfb/tfp410: Convert to platform remove callback returning void fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void fbdev: omapfb/opa362: Convert to platform remove callback returning void fbdev: omapfb/hdmi: Convert to platform remove callback returning void fbdev: omapfb/dvi: Convert to platform remove callback returning void fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void fbdev: omapfb/dpi: Convert to platform remove callback returning void fbdev: omapfb/analog-tv: Convert to platform remove callback returning void fbdev: atmel_lcdfb: Convert to platform remove callback returning void fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs ...
2023-11-11tracing/kprobes: Fix the order of argument descriptionsYujie Liu
The order of descriptions should be consistent with the argument list of the function, so "kretprobe" should be the second one. int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe, const char *name, const char *loc, ...) Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/ Fixes: 2a588dd1d5d6 ("tracing: Add kprobe event command generation functions") Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Yujie Liu <yujie.liu@intel.com> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2023-11-10Merge tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Daniel Vetter: "Dave's VPN to the big machine died, so it's on me to do fixes pr this and next week while everyone else is at plumbers. - big pile of amd fixes, but mostly for hw support newly added in 6.7 - i915 fixes, mostly minor things - qxl memory leak fix - vc4 uaf fix in mock helpers - syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE" * tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits) drm/amdgpu: fix error handling in amdgpu_vm_init drm/amdgpu: Fix possible null pointer dereference drm/amdgpu: move UVD and VCE sched entity init after sched init drm/amdgpu: move kfd_resume before the ip late init drm/amd: Explicitly check for GFXOFF to be enabled for s0ix drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2) drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5) drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support drm/amdgpu: fix software pci_unplug on some chips drm/amd/display: remove duplicated argument drm/amdgpu: correct mca debugfs dump reg list drm/amdgpu: correct acclerator check architecutre dump drm/amdgpu: add pcs xgmi v6.4.0 ras support drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3 drm/amdgpu: disable smu v13.0.6 mca debug mode by default drm/amdgpu: Support multiple error query modes drm/amdgpu: refine smu v13.0.6 mca dump driver drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2) drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV drm: amd: Resolve Sphinx unexpected indentation warning ...
2023-11-10Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken MediaTek firmware: - Move the MediaTek GIC quirk handling from irqchip to core. Before the merging window commit 44bd78dd2b88 ("irqchip/gic-v3: Disable pseudo NMIs on MediaTek devices w/ firmware issues") temporarily addressed this issue. Fixed now at a deeper level in the arch code - Reject events meant for other PMUs in the CoreSight PMU driver, otherwise some of the core PMU events would disappear - Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers, causing some events to be invisible - Remove duplicate declaration of __arm64_sys##name following the patch to avoid prototype warning for syscalls - Typos in the elf_hwcap documentation" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/syscall: Remove duplicate declaration Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW" arm64: Move MediaTek GIC quirk handling from irqchip to core arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers perf: arm_cspmu: Reject events meant for other PMUs Documentation/arm64: Fix typos in elf_hwcaps
2023-11-10Merge tag 'sound-fix-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of fixes for rc1. The majority of changes are various ASoC driver-specific small fixes and usual HD-audio quirks, while there are a couple of core changes: a fix in ALSA core procfs code to avoid deadlocks at disconnection and an ASoC core fix for DAPM clock widgets" * tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: OSS: dmasound/paula: Convert to platform remove callback returning void ALSA: hda: ASUS UM5302LA: Added quirks for cs35L41/10431A83 on i2c bus ALSA: info: Fix potential deadlock at disconnection ASoC: nau8540: Add self recovery to improve capture quility ALSA: hda/realtek: Add support dual speaker for Dell ALSA: hda: Add ASRock X670E Taichi to denylist ALSA: hda/realtek: Add quirk for ASUS UX7602ZM ASoC: SOF: sof-client: trivial: fix comment typo ASoC: dapm: fix clock get name ASoC: hdmi-codec: register hpd callback on component probe ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messages ASoC: da7219: Improve system suspend and resume handling ASoC: codecs: Modify macro value error ASoC: codecs: Modify the wrong judgment of re value ASoC: codecs: Modify the maximum value of calib ASoC: amd: acp: fix for i2s mode register field update ASoC: codecs: aw88399: Fix -Wuninitialized in aw_dev_set_vcalb() ASoC: rt712-sdca: fix speaker route missing issue ASoC: rockchip: Fix unused rockchip_i2s_tdm_match warning for !CONFIG_OF ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings
2023-11-10Merge tag 'amd-drm-next-6.7-2023-11-10' of ↵Daniel Vetter
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.7-2023-11-10: amdgpu: - SR-IOV fixes - DMCUB fixes - DCN3.5 fixes - DP2 fixes - SubVP fixes - SMU14 fixes - SDMA4.x fixes - Suspend/resume fixes - AGP regression fix - UAF fixes for some error cases - SMU 13.0.6 fixes - Documentation fixes - RAS fixes - Hotplug fixes - Scheduling entity ordering fix - GPUVM fixes Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231110190703.4741-1-alexander.deucher@amd.com
2023-11-10Merge tag 'spi-fix-v6.7-merge-window' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A couple of fixes that came in during the merge window: one Kconfig dependency fix and another fix for a long standing issue where a sync transfer races with system suspend" * tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: Fix null dereference on suspend spi: spi-zynq-qspi: add spi-mem to driver kconfig dependencies
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 09:31:25 +0000