summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-09-02Linux 5.10.194v5.10.194Greg Kroah-Hartman
Link: https://lore.kernel.org/r/20230831110830.455765526@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-02rcu-tasks: Add trc_inspect_reader() checks for exiting critical sectionPaul E. McKenney
commit 18f08e758f34e6dfe0668bee51bd2af7adacf381 upstream. Currently, trc_inspect_reader() treats a task exiting its RCU Tasks Trace read-side critical section the same as being within that critical section. However, this can fail because that task might have already checked its .need_qs field, which means that it might never decrement the all-important trc_n_readers_need_end counter. Of course, for that to happen, the task would need to never again execute an RCU Tasks Trace read-side critical section, but this really could happen if the system's last trampoline was removed. Note that exit from such a critical section cannot be treated as a quiescent state due to the possibility of nested critical sections. This means that if trc_inspect_reader() sees a negative nesting value, it must set up to try again later. This commit therefore ignores tasks that are exiting their RCU Tasks Trace read-side critical sections so that they will be rechecked later. [ paulmck: Apply feedback from Neeraj Upadhyay and Boqun Feng. ] Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-02rcu-tasks: Wait for trc_read_check_handler() IPIsPaul E. McKenney
commit cbe0d8d91415c9692fe88191940d98952b6855d9 upstream. Currently, RCU Tasks Trace initializes the trc_n_readers_need_end counter to the value one, increments it before each trc_read_check_handler() IPI, then decrements it within trc_read_check_handler() if the target task was in a quiescent state (or if the target task moved to some other CPU while the IPI was in flight), complaining if the new value was zero. The rationale for complaining is that the initial value of one must be decremented away before zero can be reached, and this decrement has not yet happened. Except that trc_read_check_handler() is initiated with an asynchronous smp_call_function_single(), which might be significantly delayed. This can result in false-positive complaints about the counter reaching zero. This commit therefore waits for in-flight IPI handlers to complete before decrementing away the initial value of one from the trc_n_readers_need_end counter. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-02rcu-tasks: Fix IPI failure handling in trc_wait_for_one_readerNeeraj Upadhyay
commit 46aa886c483f57ef13cd5ea0a85e70b93eb1d381 upstream. The trc_wait_for_one_reader() function is called at multiple stages of trace rcu-tasks GP function, rcu_tasks_wait_gp(): - First, it is called as part of per task function - rcu_tasks_trace_pertask(), for all non-idle tasks. As part of per task processing, this function add the task in the holdout list and if the task is currently running on a CPU, it sends IPI to the task's CPU. The IPI handler takes action depending on whether task is in trace rcu-tasks read side critical section or not: - a. If the task is in trace rcu-tasks read side critical section (t->trc_reader_nesting != 0), the IPI handler sets the task's ->trc_reader_special.b.need_qs, so that this task notifies exit from its outermost read side critical section (by decrementing trc_n_readers_need_end) to the GP handling function. trc_wait_for_one_reader() also increments trc_n_readers_need_end, so that the trace rcu-tasks GP handler function waits for this task's read side exit notification. The IPI handler also sets t->trc_reader_checked to true, and no further IPIs are sent for this task, for this trace rcu-tasks grace period and this task can be removed from holdout list. - b. If the task is in the process of exiting its trace rcu-tasks read side critical section, (t->trc_reader_nesting < 0), defer this task's processing to future calls to trc_wait_for_one_reader(). - c. If task is not in rcu-task read side critical section, t->trc_reader_nesting == 0, ->trc_reader_checked is set for this task, so that this task is removed from holdout list. - Second, trc_wait_for_one_reader() is called as part of post scan, in function rcu_tasks_trace_postscan(), for all idle tasks. - Third, in function check_all_holdout_tasks_trace(), this function is called for each task in the holdout list, but only if there isn't a pending IPI for the task (->trc_ipi_to_cpu == -1). This function removed the task from holdout list, if IPI handler has completed the required work, to ensure that the current trace rcu-tasks grace period either waits for this task, or this task is not in a trace rcu-tasks read side critical section. Now, considering the scenario where smp_call_function_single() fails in first case, inside rcu_tasks_trace_pertask(). In this case, ->trc_ipi_to_cpu is set to the current CPU for that task. This will result in trc_wait_for_one_reader() getting skipped in third case, inside check_all_holdout_tasks_trace(), for this task. This further results in ->trc_reader_checked never getting set for this task, and the task not getting removed from holdout list. This can cause the current trace rcu-tasks grace period to stall. Fix the above problem, by resetting ->trc_ipi_to_cpu to -1, on smp_call_function_single() failure, so that future IPI calls can be send for this task. Note that all three of the trc_wait_for_one_reader() function's callers (rcu_tasks_trace_pertask(), rcu_tasks_trace_postscan(), check_all_holdout_tasks_trace()) hold cpu_read_lock(). This means that smp_call_function_single() cannot race with CPU hotplug, and thus should never fail. Therefore, also add a warning in order to report any such failure in case smp_call_function_single() grows some other reason for failure. Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-02rcu: Prevent expedited GP from enabling tick on offline CPUPaul E. McKenney
commit 147f04b14adde831eb4a0a1e378667429732f9e8 upstream. If an RCU expedited grace period starts just when a CPU is in the process of going offline, so that the outgoing CPU has completed its pass through stop-machine but has not yet completed its final dive into the idle loop, RCU will attempt to enable that CPU's scheduling-clock tick via a call to tick_dep_set_cpu(). For this to happen, that CPU has to have been online when the expedited grace period completed its CPU-selection phase. This is pointless: The outgoing CPU has interrupts disabled, so it cannot take a scheduling-clock tick anyway. In addition, the tick_dep_set_cpu() function's eventual call to irq_work_queue_on() will splat as follows: smpboot: CPU 1 is now offline WARNING: CPU: 6 PID: 124 at kernel/irq_work.c:95 +irq_work_queue_on+0x57/0x60 Modules linked in: CPU: 6 PID: 124 Comm: kworker/6:2 Not tainted 5.15.0-rc1+ #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS +rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014 Workqueue: rcu_gp wait_rcu_exp_gp RIP: 0010:irq_work_queue_on+0x57/0x60 Code: 8b 05 1d c7 ea 62 a9 00 00 f0 00 75 21 4c 89 ce 44 89 c7 e8 +9b 37 fa ff ba 01 00 00 00 89 d0 c3 4c 89 cf e8 3b ff ff ff eb ee <0f> 0b eb b7 +0f 0b eb db 90 48 c7 c0 98 2a 02 00 65 48 03 05 91 6f RSP: 0000:ffffb12cc038fe48 EFLAGS: 00010282 RAX: 0000000000000001 RBX: 0000000000005208 RCX: 0000000000000020 RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff9ad01f45a680 RBP: 000000000004c990 R08: 0000000000000001 R09: ffff9ad01f45a680 R10: ffffb12cc0317db0 R11: 0000000000000001 R12: 00000000fffecee8 R13: 0000000000000001 R14: 0000000000026980 R15: ffffffff9e53ae00 FS: 0000000000000000(0000) GS:ffff9ad01f580000(0000) +knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000000de0c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tick_nohz_dep_set_cpu+0x59/0x70 rcu_exp_wait_wake+0x54e/0x870 ? sync_rcu_exp_select_cpus+0x1fc/0x390 process_one_work+0x1ef/0x3c0 ? process_one_work+0x3c0/0x3c0 worker_thread+0x28/0x3c0 ? process_one_work+0x3c0/0x3c0 kthread+0x115/0x140 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 ---[ end trace c5bf75eb6aa80bc6 ]--- This commit therefore avoids invoking tick_dep_set_cpu() on offlined CPUs to limit both futility and false-positive splats. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-02Revert "MIPS: Alchemy: fix dbdma2"Greg Kroah-Hartman
This reverts commit 619672bf2d04cdc1bc3925defd0312c2ef11e5d0 which is commit 2d645604f69f3a772d58ead702f9a8e84ab2b342 upstream. It breaks the build, so should be dropped. Reported-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/5b30ff73-46cb-1d1e-3823-f175dbfbd91b@roeck-us.net Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-02Revert "drm/amdgpu: install stub fence into potential unused fence pointers"Greg Kroah-Hartman
This reverts commit 04bd3a362d2f1788272776bd8b10e5a012e69b77 which is commit 187916e6ed9d0c3b3abc27429f7a5f8c936bd1f0 upstream. It is reported to cause lots of log spam, so it should be dropped for now. Reported-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/27d08b24-3581-4451-b8db-5df144784d6a@roeck-us.net Reported-by: From: Chia-I Wu <olvaffe@gmail.com> Link: https://lore.kernel.org/r/CAPaKu7RTgAMBLHbwtp4zgiBSDrTFtAj07k5qMzkuLQy2Zr+sZA@mail.gmail.com Cc: Christian König <christian.koenig@amd.com> Cc: Lang Yu <Lang.Yu@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-02mhi: pci_generic: Fix implicit conversion warningLoic Poulain
commit 4ea6fa2cb921cb17812501a27c3761037d64a217 upstream. Fix the following warning with explicit cast: warning: implicit conversion from 'unsigned long long' to 'dma_addr_t' (aka 'unsigned int') mhi_cntrl->iova_stop = DMA_BIT_MASK(info->dma_data_width); Fixes: 855a70c12021 ("bus: mhi: Add MHI PCI support for WWAN modems") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-02ARM: module: Use module_init_layout_section() to spot init sectionsJames Morse
commit a6846234f45801441f0e31a8b37f901ef0abd2df upstream. Today module_frob_arch_sections() spots init sections from their 'init' prefix, and uses this to keep the init PLTs separate from the rest. get_module_plt() uses within_module_init() to determine if a location is in the init text or not, but this depends on whether core code thought this was an init section. Naturally the logic is different. module_init_layout_section() groups the init and exit text together if module unloading is disabled, as the exit code will never run. The result is kernels with this configuration can't load all their modules because there are not enough PLTs for the combined init+exit section. A previous patch exposed module_init_layout_section(), use that so the logic is the same. Fixes: 055f23b74b20 ("module: check for exit sections in layout_sections() instead of module_init_section()") Cc: stable@vger.kernel.org Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-02arm64: module: Use module_init_layout_section() to spot init sectionsJames Morse
commit f928f8b1a2496e7af95b860f9acf553f20f68f16 upstream. Today module_frob_arch_sections() spots init sections from their 'init' prefix, and uses this to keep the init PLTs separate from the rest. module_emit_plt_entry() uses within_module_init() to determine if a location is in the init text or not, but this depends on whether core code thought this was an init section. Naturally the logic is different. module_init_layout_section() groups the init and exit text together if module unloading is disabled, as the exit code will never run. The result is kernels with this configuration can't load all their modules because there are not enough PLTs for the combined init+exit section. This results in the following: | WARNING: CPU: 2 PID: 51 at arch/arm64/kernel/module-plts.c:99 module_emit_plt_entry+0x184/0x1cc | Modules linked in: crct10dif_common | CPU: 2 PID: 51 Comm: modprobe Not tainted 6.5.0-rc4-yocto-standard-dirty #15208 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : module_emit_plt_entry+0x184/0x1cc | lr : module_emit_plt_entry+0x94/0x1cc | sp : ffffffc0803bba60 [...] | Call trace: | module_emit_plt_entry+0x184/0x1cc | apply_relocate_add+0x2bc/0x8e4 | load_module+0xe34/0x1bd4 | init_module_from_file+0x84/0xc0 | __arm64_sys_finit_module+0x1b8/0x27c | invoke_syscall.constprop.0+0x5c/0x104 | do_el0_svc+0x58/0x160 | el0_svc+0x38/0x110 | el0t_64_sync_handler+0xc0/0xc4 | el0t_64_sync+0x190/0x194 A previous patch exposed module_init_layout_section(), use that so the logic is the same. Reported-by: Adam Johnston <adam.johnston@arm.com> Tested-by: Adam Johnston <adam.johnston@arm.com> Fixes: 055f23b74b20 ("module: check for exit sections in layout_sections() instead of module_init_section()") Cc: <stable@vger.kernel.org> # 5.15.x: 60a0aab7463ee69 arm64: module-plts: inline linux/moduleloader.h Cc: <stable@vger.kernel.org> # 5.15.x Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-02arm64: module-plts: inline linux/moduleloader.hArnd Bergmann
commit 60a0aab7463ee69296692d980b96510ccce3934e upstream. module_frob_arch_sections() is declared in moduleloader.h, but that is not included before the definition: arch/arm64/kernel/module-plts.c:286:5: error: no previous prototype for 'module_frob_arch_sections' [-Werror=missing-prototypes] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20230516160642.523862-11-arnd@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-02module: Expose module_init_layout_section()James Morse
commit 2abcc4b5a64a65a2d2287ba0be5c2871c1552416 upstream. module_init_layout_section() choses whether the core module loader considers a section as init or not. This affects the placement of the exit section when module unloading is disabled. This code will never run, so it can be free()d once the module has been initialised. arm and arm64 need to count the number of PLTs they need before applying relocations based on the section name. The init PLTs are stored separately so they can be free()d. arm and arm64 both use within_module_init() to decide which list of PLTs to use when applying the relocation. Because within_module_init()'s behaviour changes when module unloading is disabled, both architecture would need to take this into account when counting the PLTs. Today neither architecture does this, meaning when module unloading is disabled there are insufficient PLTs in the init section to load some modules, resulting in warnings: | WARNING: CPU: 2 PID: 51 at arch/arm64/kernel/module-plts.c:99 module_emit_plt_entry+0x184/0x1cc | Modules linked in: crct10dif_common | CPU: 2 PID: 51 Comm: modprobe Not tainted 6.5.0-rc4-yocto-standard-dirty #15208 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : module_emit_plt_entry+0x184/0x1cc | lr : module_emit_plt_entry+0x94/0x1cc | sp : ffffffc0803bba60 [...] | Call trace: | module_emit_plt_entry+0x184/0x1cc | apply_relocate_add+0x2bc/0x8e4 | load_module+0xe34/0x1bd4 | init_module_from_file+0x84/0xc0 | __arm64_sys_finit_module+0x1b8/0x27c | invoke_syscall.constprop.0+0x5c/0x104 | do_el0_svc+0x58/0x160 | el0_svc+0x38/0x110 | el0t_64_sync_handler+0xc0/0xc4 | el0t_64_sync+0x190/0x194 Instead of duplicating module_init_layout_section()s logic, expose it. Reported-by: Adam Johnston <adam.johnston@arm.com> Fixes: 055f23b74b20 ("module: check for exit sections in layout_sections() instead of module_init_section()") Cc: stable@vger.kernel.org Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30Linux 5.10.193v5.10.193Greg Kroah-Hartman
Link: https://lore.kernel.org/r/20230828101149.146126827@linuxfoundation.org Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Hulk Robot <hulkrobot@huawei.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30mm,hwpoison: fix printing of page flagsOscar Salvador
commit 6696d2a6f38c0beedf03c381edfc392ecf7631b4 upstream. Format %pG expects a lower case 'p' in order to print the flags. Fix it. Link: https://lkml.kernel.org/r/20210108085202.4506-1-osalvador@suse.de Fixes: 8295d535e2aa ("mm,hwpoison: refactor get_any_page") Signed-off-by: Oscar Salvador <osalvador@suse.de> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30ASoC: Intel: sof_sdw: include rt711.h for RT711 JD modeBard Liao
commit 8e6c00f1fdea9fdf727969d7485d417240d2a1f9 upstream. We don't need to redefine enum rt711_jd_src. Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210712203240.46960-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Philip Müller <philm@manjaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30mm: memory-failure: fix unexpected return value in soft_offline_page()Miaohe Lin
[ Upstream commit e2c1ab070fdc81010ec44634838d24fce9ff9e53 ] When page_handle_poison() fails to handle the hugepage or free page in retry path, soft_offline_page() will return 0 while -EBUSY is expected in this case. Consequently the user will think soft_offline_page succeeds while it in fact failed. So the user will not try again later in this case. Link: https://lkml.kernel.org/r/20230627112808.1275241-1-linmiaohe@huawei.com Fixes: b94e02822deb ("mm,hwpoison: try to narrow window race for free pages") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30mm: memory-failure: kill soft_offline_free_page()Kefeng Wang
[ Upstream commit 7adb45887c8af88985c335b53d253654e9d2dd16 ] Open-code the page_handle_poison() into soft_offline_page() and kill unneeded soft_offline_free_page(). Link: https://lkml.kernel.org/r/20220819033402.156519-1-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Stable-dep-of: e2c1ab070fdc ("mm: memory-failure: fix unexpected return value in soft_offline_page()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30mm: fix page reference leak in soft_offline_page()Dan Williams
[ Upstream commit dad4e5b390866ca902653df0daa864ae4b8d4147 ] The conversion to move pfn_to_online_page() internal to soft_offline_page() missed that the get_user_pages() reference taken by the madvise() path needs to be dropped when pfn_to_online_page() fails. Note the direct sysfs-path to soft_offline_page() does not perform a get_user_pages() lookup. When soft_offline_page() is handed a pfn_valid() && !pfn_to_online_page() pfn the kernel hangs at dax-device shutdown due to a leaked reference. Link: https://lkml.kernel.org/r/161058501210.1840162.8108917599181157327.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: feec24a6139d ("mm, soft-offline: convert parameter to pfn") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Qian Cai <cai@lca.pw> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Stable-dep-of: e2c1ab070fdc ("mm: memory-failure: fix unexpected return value in soft_offline_page()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30mm,hwpoison: refactor get_any_pageOscar Salvador
[ Upstream commit 8295d535e2aa198bdf65a4045d622df38955ffe2 ] Patch series "HWPoison: Refactor get page interface", v2. This patch (of 3): When we want to grab a refcount via get_any_page, we call __get_any_page that calls get_hwpoison_page to get the actual refcount. get_any_page() is only there because we have a sort of retry mechanism in case the page we met is unknown to us or if we raced with an allocation. Also __get_any_page() prints some messages about the page type in case the page was a free page or the page type was unknown, but if anything, we only need to print a message in case the pagetype was unknown, as that is reporting an error down the chain. Let us merge get_any_page() and __get_any_page(), and let the message be printed in soft_offline_page. While we are it, we can also remove the 'pfn' parameter as it is no longer used. Link: https://lkml.kernel.org/r/20201204102558.31607-1-osalvador@suse.de Link: https://lkml.kernel.org/r/20201204102558.31607-2-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Acked-by: Vlastimil Babka <Vbabka@suse.cz> Cc: Qian Cai <qcai@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Stable-dep-of: e2c1ab070fdc ("mm: memory-failure: fix unexpected return value in soft_offline_page()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30dma-buf/sw_sync: Avoid recursive lock during fence signalRob Clark
[ Upstream commit e531fdb5cd5ee2564b7fe10c8a9219e2b2fac61e ] If a signal callback releases the sw_sync fence, that will trigger a deadlock as the timeline_fence_release recurses onto the fence->lock (used both for signaling and the the timeline tree). To avoid that, temporarily hold an extra reference to the signalled fences until after we drop the lock. (This is an alternative implementation of https://patchwork.kernel.org/patch/11664717/ which avoids some potential UAF issues with the original patch.) v2: Remove now obsolete comment, use list_move_tail() and list_del_init() Reported-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Fixes: d3c6dd1fb30d ("dma-buf/sw_sync: Synchronize signal vs syncpt free") Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230818145939.39697-1-robdclark@gmail.com Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30pinctrl: renesas: rza2: Add lock around ↵Biju Das
pinctrl_generic{{add,remove}_group,{add,remove}_function} [ Upstream commit 8fcc1c40b747069644db6102c1d84c942c9d4d86 ] The pinctrl group and function creation/remove calls expect caller to take care of locking. Add lock around these functions. Fixes: b59d0e782706 ("pinctrl: Add RZ/A2 pin and gpio controller") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230815131558.33787-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30clk: Fix undefined reference to `clk_rate_exclusive_{get,put}'Biju Das
[ Upstream commit 2746f13f6f1df7999001d6595b16f789ecc28ad1 ] The COMMON_CLK config is not enabled in some of the architectures. This causes below build issues: pwm-rz-mtu3.c:(.text+0x114): undefined reference to `clk_rate_exclusive_put' pwm-rz-mtu3.c:(.text+0x32c): undefined reference to `clk_rate_exclusive_get' Fix these issues by moving clk_rate_exclusive_{get,put} inside COMMON_CLK code block, as clk.c is enabled by COMMON_CLK. Fixes: 55e9b8b7b806 ("clk: add clk_rate_exclusive api") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/all/202307251752.vLfmmhYm-lkp@intel.com/ Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230725175140.361479-1-biju.das.jz@bp.renesas.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-30scsi: core: raid_class: Remove raid_component_add()Zhu Wang
commit 60c5fd2e8f3c42a5abc565ba9876ead1da5ad2b7 upstream. The raid_component_add() function was added to the kernel tree via patch "[SCSI] embryonic RAID class" (2005). Remove this function since it never has had any callers in the Linux kernel. And also raid_component_release() is only used in raid_component_add(), so it is also removed. Signed-off-by: Zhu Wang <wangzhu9@huawei.com> Link: https://lore.kernel.org/r/20230822015254.184270-1-wangzhu9@huawei.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Fixes: 04b5b5cb0136 ("scsi: core: Fix possible memory leak if device_add() fails") Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30scsi: snic: Fix double free in snic_tgt_create()Zhu Wang
commit 1bd3a76880b2bce017987cf53780b372cf59528e upstream. Commit 41320b18a0e0 ("scsi: snic: Fix possible memory leak if device_add() fails") fixed the memory leak caused by dev_set_name() when device_add() failed. However, it did not consider that 'tgt' has already been released when put_device(&tgt->dev) is called. Remove kfree(tgt) in the error path to avoid double free of 'tgt' and move put_device(&tgt->dev) after the removed kfree(tgt) to avoid a use-after-free. Fixes: 41320b18a0e0 ("scsi: snic: Fix possible memory leak if device_add() fails") Signed-off-by: Zhu Wang <wangzhu9@huawei.com> Link: https://lore.kernel.org/r/20230819083941.164365-1-wangzhu9@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30ASoC: rt711: add two jack detection modesShuming Fan
commit 683b0df26c3333a5c020a2764b71a70d082c1c61 upstream. Some boards use different circuits for jack detection. This patch adds two modes as below 1. JD2/2 ports/external resister 100k 2. JD2/1 port/JD voltage 1.8V Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20210617090822.16960-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Philip Müller <philm@manjaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30drm/i915: Fix premature release of request's reusable memoryJanusz Krzysztofik
commit a337b64f0d5717248a0c894e2618e658e6a9de9f upstream. Infinite waits for completion of GPU activity have been observed in CI, mostly inside __i915_active_wait(), triggered by igt@gem_barrier_race or igt@perf@stress-open-close. Root cause analysis, based of ftrace dumps generated with a lot of extra trace_printk() calls added to the code, revealed loops of request dependencies being accidentally built, preventing the requests from being processed, each waiting for completion of another one's activity. After we substitute a new request for a last active one tracked on a timeline, we set up a dependency of our new request to wait on completion of current activity of that previous one. While doing that, we must take care of keeping the old request still in memory until we use its attributes for setting up that await dependency, or we can happen to set up the await dependency on an unrelated request that already reuses the memory previously allocated to the old one, already released. Combined with perf adding consecutive kernel context remote requests to different user context timelines, unresolvable loops of await dependencies can be built, leading do infinite waits. We obtain a pointer to the previous request to wait upon when we substitute it with a pointer to our new request in an active tracker, e.g. in intel_timeline.last_request. In some processing paths we protect that old request from being freed before we use it by getting a reference to it under RCU protection, but in others, e.g. __i915_request_commit() -> __i915_request_add_to_timeline() -> __i915_request_ensure_ordering(), we don't. But anyway, since the requests' memory is SLAB_FAILSAFE_BY_RCU, that RCU protection is not sufficient against reuse of memory. We could protect i915_request's memory from being prematurely reused by calling its release function via call_rcu() and using rcu_read_lock() consequently, as proposed in v1. However, that approach leads to significant (up to 10 times) increase of SLAB utilization by i915_request SLAB cache. Another potential approach is to take a reference to the previous active fence. When updating an active fence tracker, we first lock the new fence, substitute a pointer of the current active fence with the new one, then we lock the substituted fence. With this approach, there is a time window after the substitution and before the lock when the request can be concurrently released by an interrupt handler and its memory reused, then we may happen to lock and return a new, unrelated request. Always get a reference to the current active fence first, before replacing it with a new one. Having it protected from premature release and reuse, lock it and then replace with the new one but only if not yet signalled via a potential concurrent interrupt nor replaced with another one by a potential concurrent thread, otherwise retry, starting from getting a reference to the new current one. Adjust users to not get a reference to the previous active fence themselves and always put the reference got by __i915_active_fence_set() when no longer needed. v3: Fix lockdep splat reports and other issues caused by incorrect use of try_cmpxchg() (use (cmpxchg() != prev) instead) v2: Protect request's memory by getting a reference to it in favor of delegating its release to call_rcu() (Chris) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8211 Fixes: df9f85d8582e ("drm/i915: Serialise i915_active_fence_set() with itself") Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.6+ Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230720093543.832147-2-janusz.krzysztofik@linux.intel.com (cherry picked from commit 946e047a3d88d46d15b5c5af0414098e12b243f7) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30cgroup/cpuset: Free DL BW in case can_attach() failsDietmar Eggemann
commit 2ef269ef1ac006acf974793d975539244d77b28f upstream. cpuset_can_attach() can fail. Postpone DL BW allocation until all tasks have been checked. DL BW is not allocated per-task but as a sum over all DL tasks migrating. If multiple controllers are attached to the cgroup next to the cpuset controller a non-cpuset can_attach() can fail. In this case free DL BW in cpuset_cancel_attach(). Finally, update cpuset DL task count (nr_deadline_tasks) only in cpuset_attach(). Suggested-by: Waiman Long <longman@redhat.com> Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> [ Fix conflicts in kernel/cgroup/cpuset.c due to new code being applied that is not applicable on this branch. Reject new code. ] Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30sched/deadline: Create DL BW alloc, free & check overflow interfaceDietmar Eggemann
commit 85989106feb734437e2d598b639991b9185a43a6 upstream. While moving a set of tasks between exclusive cpusets, cpuset_can_attach() -> task_can_attach() calls dl_cpu_busy(..., p) for DL BW overflow checking and per-task DL BW allocation on the destination root_domain for the DL tasks in this set. This approach has the issue of not freeing already allocated DL BW in the following error cases: (1) The set of tasks includes multiple DL tasks and DL BW overflow checking fails for one of the subsequent DL tasks. (2) Another controller next to the cpuset controller which is attached to the same cgroup fails in its can_attach(). To address this problem rework dl_cpu_busy(): (1) Split it into dl_bw_check_overflow() & dl_bw_alloc() and add a dedicated dl_bw_free(). (2) dl_bw_alloc() & dl_bw_free() take a `u64 dl_bw` parameter instead of a `struct task_struct *p` used in dl_cpu_busy(). This allows to allocate DL BW for a set of tasks too rather than only for a single task. Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30cgroup/cpuset: Iterate only if DEADLINE tasks are presentJuri Lelli
commit c0f78fd5edcf29b2822ac165f9248a6c165e8554 upstream. update_tasks_root_domain currently iterates over all tasks even if no DEADLINE task is present on the cpuset/root domain for which bandwidth accounting is being rebuilt. This has been reported to introduce 10+ ms delays on suspend-resume operations. Skip the costly iteration for cpusets that don't contain DEADLINE tasks. Reported-by: Qais Yousef (Google) <qyousef@layalina.io> Link: https://lore.kernel.org/lkml/20230206221428.2125324-1-qyousef@layalina.io/ Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30sched/cpuset: Keep track of SCHED_DEADLINE task in cpusetsJuri Lelli
commit 6c24849f5515e4966d94fa5279bdff4acf2e9489 upstream. Qais reported that iterating over all tasks when rebuilding root domains for finding out which ones are DEADLINE and need their bandwidth correctly restored on such root domains can be a costly operation (10+ ms delays on suspend-resume). To fix the problem keep track of the number of DEADLINE tasks belonging to each cpuset and then use this information (followup patch) to only perform the above iteration if DEADLINE tasks are actually present in the cpuset for which a corresponding root domain is being rebuilt. Reported-by: Qais Yousef (Google) <qyousef@layalina.io> Link: https://lore.kernel.org/lkml/20230206221428.2125324-1-qyousef@layalina.io/ Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> [ Fix conflicts in kernel/cgroup/cpuset.c and kernel/sched/deadline.c due to pulling new fields and functions. Remove new code and match the patch diff. ] Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30sched/cpuset: Bring back cpuset_mutexJuri Lelli
commit 111cd11bbc54850f24191c52ff217da88a5e639b upstream. Turns out percpu_cpuset_rwsem - commit 1243dc518c9d ("cgroup/cpuset: Convert cpuset_mutex to percpu_rwsem") - wasn't such a brilliant idea, as it has been reported to cause slowdowns in workloads that need to change cpuset configuration frequently and it is also not implementing priority inheritance (which causes troubles with realtime workloads). Convert percpu_cpuset_rwsem back to regular cpuset_mutex. Also grab it only for SCHED_DEADLINE tasks (other policies don't care about stable cpusets anyway). Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> [ Fix conflict in kernel/cgroup/cpuset.c due to pulling new functions or comment that don't exist on 5.10 or the usage of different cpu hotplug lock whenever replacing the rwsem with mutex. Remove BUG_ON() for rwsem that doesn't exist on mainline. ] Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30cgroup/cpuset: Rename functions dealing with DEADLINE accountingJuri Lelli
commit ad3a557daf6915296a43ef97a3e9c48e076c9dd8 upstream. rebuild_root_domains() and update_tasks_root_domain() have neutral names, but actually deal with DEADLINE bandwidth accounting. Rename them to use 'dl_' prefix so that intent is more clear. No functional change. Suggested-by: Qais Yousef (Google) <qyousef@layalina.io> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30timers/nohz: Switch to ONESHOT_STOPPED in the low-res handler when the tick ↵Nicholas Piggin
is stopped commit 62c1256d544747b38e77ca9b5bfe3a26f9592576 upstream. When tick_nohz_stop_tick() stops the tick and high resolution timers are disabled, then the clock event device is not put into ONESHOT_STOPPED mode. This can lead to spurious timer interrupts with some clock event device drivers that don't shut down entirely after firing. Eliminate these by putting the device into ONESHOT_STOPPED mode at points where it is not being reprogrammed. When there are no timers active, then tick_program_event() with KTIME_MAX can be used to stop the device. When there is a timer active, the device can be stopped at the next tick (any new timer added by timers will reprogram the tick). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20220422141446.915024-1-npiggin@gmail.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30tick: Detect and fix jiffies update stallFrederic Weisbecker
commit a1ff03cd6fb9c501fff63a4a2bface9adcfa81cd upstream. On some rare cases, the timekeeper CPU may be delaying its jiffies update duty for a while. Known causes include: * The timekeeper is waiting on stop_machine in a MULTI_STOP_DISABLE_IRQ or MULTI_STOP_RUN state. Disabled interrupts prevent from timekeeping updates while waiting for the target CPU to complete its stop_machine() callback. * The timekeeper vcpu has VMEXIT'ed for a long while due to some overload on the host. Detect and fix these situations with emergency timekeeping catchups. Original-patch-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30torture: Fix hang during kthread shutdown phaseJoel Fernandes (Google)
commit d52d3a2bf408ff86f3a79560b5cce80efb340239 upstream. During rcutorture shutdown, the rcu_torture_cleanup() function calls torture_cleanup_begin(), which sets the fullstop global variable to FULLSTOP_RMMOD. This causes the rcutorture threads for readers and fakewriters to exit all of their "while" loops and start shutting down. They then call torture_kthread_stopping(), which in turn waits for kthread_stop() to be called. However, rcu_torture_cleanup() has not yet called kthread_stop() on those threads, and before it gets a chance to do so, multiple instances of torture_kthread_stopping() invoke schedule_timeout_interruptible(1) in a tight loop. Tracing confirms that TIMER_SOFTIRQ can then continuously execute timer callbacks. If that TIMER_SOFTIRQ preempts the task executing rcu_torture_cleanup(), that task might never invoke kthread_stop(). This commit improves this situation by increasing the timeout passed to schedule_timeout_interruptible() from one jiffy to 1/20th of a second. This change prevents TIMER_SOFTIRQ from monopolizing its CPU, thus allowing rcu_torture_cleanup() to carry out the needed kthread_stop() invocations. Testing has shown 100 runs of TREE07 passing reliably, as oppose to the tens-of-percent failure rates seen beforehand. Cc: Paul McKenney <paulmck@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Zhouyi Zhou <zhouzhouyi@gmail.com> Cc: <stable@vger.kernel.org> # 6.0.x Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30x86/fpu: Set X86_FEATURE_OSXSAVE feature after enabling OSXSAVE in CR4Feng Tang
commit 2c66ca3949dc701da7f4c9407f2140ae425683a5 upstream. 0-Day found a 34.6% regression in stress-ng's 'af-alg' test case, and bisected it to commit b81fac906a8f ("x86/fpu: Move FPU initialization into arch_cpu_finalize_init()"), which optimizes the FPU init order, and moves the CR4_OSXSAVE enabling into a later place: arch_cpu_finalize_init identify_boot_cpu identify_cpu generic_identify get_cpu_cap --> setup cpu capability ... fpu__init_cpu fpu__init_cpu_xstate cr4_set_bits(X86_CR4_OSXSAVE); As the FPU is not yet initialized the CPU capability setup fails to set X86_FEATURE_OSXSAVE. Many security module like 'camellia_aesni_avx_x86_64' depend on this feature and therefore fail to load, causing the regression. Cure this by setting X86_FEATURE_OSXSAVE feature right after OSXSAVE enabling. [ tglx: Moved it into the actual BSP FPU initialization code and added a comment ] Fixes: b81fac906a8f ("x86/fpu: Move FPU initialization into arch_cpu_finalize_init()") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/202307192135.203ac24e-oliver.sang@intel.com Link: https://lore.kernel.org/lkml/20230823065747.92257-1-feng.tang@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30drm/display/dp: Fix the DP DSC Receiver cap sizeAnkit Nautiyal
commit 5ad1ab30ac0809d2963ddcf39ac34317a24a2f17 upstream. DP DSC Receiver Capabilities are exposed via DPCD 60h-6Fh. Fix the DSC RECEIVER CAP SIZE accordingly. Fixes: ffddc4363c28 ("drm/dp: Add DP DSC DPCD receiver capability size define and missing SHIFT") Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230818044436.177806-1-ankit.k.nautiyal@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30drm/vmwgfx: Fix shader stage validationZack Rusin
commit 14abdfae508228a7307f7491b5c4215ae70c6542 upstream. For multiple commands the driver was not correctly validating the shader stages resulting in possible kernel oopses. The validation code was only. if ever, checking the upper bound on the shader stages but never a lower bound (valid shader stages start at 1 not 0). Fixes kernel oopses ending up in vmw_binding_add, e.g.: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 2443 Comm: testcase Not tainted 6.3.0-rc4-vmwgfx #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 RIP: 0010:vmw_binding_add+0x4c/0x140 [vmwgfx] Code: 7e 30 49 83 ff 0e 0f 87 ea 00 00 00 4b 8d 04 7f 89 d2 89 cb 48 c1 e0 03 4c 8b b0 40 3d 93 c0 48 8b 80 48 3d 93 c0 49 0f af de <48> 03 1c d0 4c 01 e3 49 8> RSP: 0018:ffffb8014416b968 EFLAGS: 00010206 RAX: ffffffffc0933ec0 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 00000000ffffffff RSI: ffffb8014416b9c0 RDI: ffffb8014316f000 RBP: ffffb8014416b998 R08: 0000000000000003 R09: 746f6c735f726564 R10: ffffffffaaf2bda0 R11: 732e676e69646e69 R12: ffffb8014316f000 R13: ffffb8014416b9c0 R14: 0000000000000040 R15: 0000000000000006 FS: 00007fba8c0af740(0000) GS:ffff8a1277c80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000007c0933eb8 CR3: 0000000118244001 CR4: 00000000003706e0 Call Trace: <TASK> vmw_view_bindings_add+0xf5/0x1b0 [vmwgfx] ? ___drm_dbg+0x8a/0xb0 [drm] vmw_cmd_dx_set_shader_res+0x8f/0xc0 [vmwgfx] vmw_execbuf_process+0x590/0x1360 [vmwgfx] vmw_execbuf_ioctl+0x173/0x370 [vmwgfx] ? __drm_dev_dbg+0xb4/0xe0 [drm] ? __pfx_vmw_execbuf_ioctl+0x10/0x10 [vmwgfx] drm_ioctl_kernel+0xbc/0x160 [drm] drm_ioctl+0x2d2/0x580 [drm] ? __pfx_vmw_execbuf_ioctl+0x10/0x10 [vmwgfx] ? do_fault+0x1a6/0x420 vmw_generic_ioctl+0xbd/0x180 [vmwgfx] vmw_unlocked_ioctl+0x19/0x20 [vmwgfx] __x64_sys_ioctl+0x96/0xd0 do_syscall_64+0x5d/0x90 ? handle_mm_fault+0xe4/0x2f0 ? debug_smp_processor_id+0x1b/0x30 ? fpregs_assert_state_consistent+0x2e/0x50 ? exit_to_user_mode_prepare+0x40/0x180 ? irqentry_exit_to_user_mode+0xd/0x20 ? irqentry_exit+0x3f/0x50 ? exc_page_fault+0x8b/0x180 entry_SYSCALL_64_after_hwframe+0x72/0xdc Signed-off-by: Zack Rusin <zackr@vmware.com> Cc: security@openanolis.org Reported-by: Ziming Zhang <ezrakiez@gmail.com> Testcase-found-by: Niels De Graef <ndegraef@redhat.com> Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support") Cc: <stable@vger.kernel.org> # v4.3+ Reviewed-by: Maaz Mombasawala<mombasawalam@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230616190934.54828-1-zack@kde.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root busIgor Mammedov
commit cc22522fd55e257c86d340ae9aedc122e705a435 upstream. 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary") changed acpiphp hotplug to use pci_assign_unassigned_bridge_resources() which depends on bridge being available, however enable_slot() can be called without bridge associated: 1. Legitimate case of hotplug on root bus (widely used in virt world) 2. A (misbehaving) firmware, that sends ACPI Bus Check notifications to non existing root ports (Dell Inspiron 7352/0W6WV0), which end up at enable_slot(..., bridge = 0) where bus has no bridge assigned to it. acpihp doesn't know that it's a bridge, and bus specific 'PCI subsystem' can't augment ACPI context with bridge information since the PCI device to get this data from is/was not available. Issue is easy to reproduce with QEMU's 'pc' machine, which supports PCI hotplug on hostbridge slots. To reproduce, boot kernel at commit 40613da52b13 in VM started with following CLI (assuming guest root fs is installed on sda1 partition): # qemu-system-x86_64 -M pc -m 1G -enable-kvm -cpu host \ -monitor stdio -serial file:serial.log \ -kernel arch/x86/boot/bzImage \ -append "root=/dev/sda1 console=ttyS0" \ guest_disk.img Once guest OS is fully booted at qemu prompt: (qemu) device_add e1000 (check serial.log) it will cause NULL pointer dereference at: void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) { struct pci_bus *parent = bridge->subordinate; BUG: kernel NULL pointer dereference, address: 0000000000000018 ? pci_assign_unassigned_bridge_resources+0x1f/0x260 enable_slot+0x21f/0x3e0 acpiphp_hotplug_notify+0x13d/0x260 acpi_device_hotplug+0xbc/0x540 acpi_hotplug_work_fn+0x15/0x20 process_one_work+0x1f7/0x370 worker_thread+0x45/0x3b0 The issue was discovered on Dell Inspiron 7352/0W6WV0 laptop with following sequence: 1. Suspend to RAM 2. Wake up with the same backtrace being observed: 3. 2nd suspend to RAM attempt makes laptop freeze Fix it by using __pci_bus_assign_resources() instead of pci_assign_unassigned_bridge_resources() as we used to do, but only in case when bus doesn't have a bridge associated (to cover for the case of ACPI event on hostbridge or non existing root port). That lets us keep hotplug on root bus working like it used to and at the same time keeps resource reassignment usable on root ports (and other 1st level bridges) that was fixed by 40613da52b13. Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary") Link: https://lore.kernel.org/r/20230726123518.2361181-2-imammedo@redhat.com Reported-by: Woody Suwalski <terraluna977@gmail.com> Tested-by: Woody Suwalski <terraluna977@gmail.com> Tested-by: Michal Koutný <mkoutny@suse.com> Link: https://lore.kernel.org/r/11fc981c-af49-ce64-6b43-3e282728bd1a@gmail.com Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30media: vcodec: Fix potential array out-of-bounds in encoder queue_setupWei Chen
commit e7f2e65699e2290fd547ec12a17008764e5d9620 upstream. variable *nplanes is provided by user via system call argument. The possible value of q_data->fmt->num_planes is 1-3, while the value of *nplanes can be 1-8. The array access by index i can cause array out-of-bounds. Fix this bug by checking *nplanes against the array size. Fixes: 4e855a6efa54 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver") Signed-off-by: Wei Chen <harperchen1110@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30of: dynamic: Refactor action prints to not use "%pOF" inside devtree_lockRob Herring
commit 914d9d831e6126a6e7a92e27fcfaa250671be42c upstream. While originally it was fine to format strings using "%pOF" while holding devtree_lock, this now causes a deadlock. Lockdep reports: of_get_parent from of_fwnode_get_parent+0x18/0x24 ^^^^^^^^^^^^^ of_fwnode_get_parent from fwnode_count_parents+0xc/0x28 fwnode_count_parents from fwnode_full_name_string+0x18/0xac fwnode_full_name_string from device_node_string+0x1a0/0x404 device_node_string from pointer+0x3c0/0x534 pointer from vsnprintf+0x248/0x36c vsnprintf from vprintk_store+0x130/0x3b4 Fix this by moving the printing in __of_changeset_entry_apply() outside the lock. As the only difference in the multiple prints is the action name, use the existing "action_names" to refactor the prints into a single print. Fixes: a92eb7621b9fb2c2 ("lib/vsprintf: Make use of fwnode API to obtain node names and separators") Cc: stable@vger.kernel.org Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-2-5f0410e007dd@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30radix tree: remove unused variableArnd Bergmann
commit d59070d1076ec5114edb67c87658aeb1d691d381 upstream. Recent versions of clang warn about an unused variable, though older versions saw the 'slot++' as a use and did not warn: radix-tree.c:1136:50: error: parameter 'slot' set but not used [-Werror,-Wunused-but-set-parameter] It's clearly not needed any more, so just remove it. Link: https://lkml.kernel.org/r/20230811131023.2226509-1-arnd@kernel.org Fixes: 3a08cd52c37c7 ("radix tree: Remove multiorder support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peng Zhang <zhangpeng.00@bytedance.com> Cc: Rong Tao <rongtao@cestc.cn> Cc: Tom Rix <trix@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30lib/clz_ctz.c: Fix __clzdi2() and __ctzdi2() for 32-bit kernelsHelge Deller
commit 382d4cd1847517ffcb1800fd462b625db7b2ebea upstream. The gcc compiler translates on some architectures the 64-bit __builtin_clzll() function to a call to the libgcc function __clzdi2(), which should take a 64-bit parameter on 32- and 64-bit platforms. But in the current kernel code, the built-in __clzdi2() function is defined to operate (wrongly) on 32-bit parameters if BITS_PER_LONG == 32, thus the return values on 32-bit kernels are in the range from [0..31] instead of the expected [0..63] range. This patch fixes the in-kernel functions __clzdi2() and __ctzdi2() to take a 64-bit parameter on 32-bit kernels as well, thus it makes the functions identical for 32- and 64-bit kernels. This bug went unnoticed since kernel 3.11 for over 10 years, and here are some possible reasons for that: a) Some architectures have assembly instructions to count the bits and which are used instead of calling __clzdi2(), e.g. on x86 the bsr instruction and on ppc cntlz is used. On such architectures the wrong __clzdi2() implementation isn't used and as such the bug has no effect and won't be noticed. b) Some architectures link to libgcc.a, and the in-kernel weak functions get replaced by the correct 64-bit variants from libgcc.a. c) __builtin_clzll() and __clzdi2() doesn't seem to be used in many places in the kernel, and most likely only in uncritical functions, e.g. when printing hex values via seq_put_hex_ll(). The wrong return value will still print the correct number, but just in a wrong formatting (e.g. with too many leading zeroes). d) 32-bit kernels aren't used that much any longer, so they are less tested. A trivial testcase to verify if the currently running 32-bit kernel is affected by the bug is to look at the output of /proc/self/maps: Here the kernel uses a correct implementation of __clzdi2(): root@debian:~# cat /proc/self/maps 00010000-00019000 r-xp 00000000 08:05 787324 /usr/bin/cat 00019000-0001a000 rwxp 00009000 08:05 787324 /usr/bin/cat 0001a000-0003b000 rwxp 00000000 00:00 0 [heap] f7551000-f770d000 r-xp 00000000 08:05 794765 /usr/lib/hppa-linux-gnu/libc.so.6 ... and this kernel uses the broken implementation of __clzdi2(): root@debian:~# cat /proc/self/maps 0000000010000-0000000019000 r-xp 00000000 000000008:000000005 787324 /usr/bin/cat 0000000019000-000000001a000 rwxp 000000009000 000000008:000000005 787324 /usr/bin/cat 000000001a000-000000003b000 rwxp 00000000 00:00 0 [heap] 00000000f73d1000-00000000f758d000 r-xp 00000000 000000008:000000005 794765 /usr/lib/hppa-linux-gnu/libc.so.6 ... Signed-off-by: Helge Deller <deller@gmx.de> Fixes: 4df87bb7b6a22 ("lib: add weak clz/ctz functions") Cc: Chanho Min <chanho.min@lge.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30batman-adv: Hold rtnl lock during MTU update via netlinkSven Eckelmann
commit 987aae75fc1041072941ffb622b45ce2359a99b9 upstream. The automatic recalculation of the maximum allowed MTU is usually triggered by code sections which are already rtnl lock protected by callers outside of batman-adv. But when the fragmentation setting is changed via batman-adv's own batadv genl family, then the rtnl lock is not yet taken. But dev_set_mtu requires that the caller holds the rtnl lock because it uses netdevice notifiers. And this code will then fail the check for this lock: RTNL: assertion failed at net/core/dev.c (1953) Cc: stable@vger.kernel.org Reported-by: syzbot+f8812454d9b3ac00d282@syzkaller.appspotmail.com Fixes: c6a953cce8d0 ("batman-adv: Trigger events for auto adjusted MTU") Signed-off-by: Sven Eckelmann <sven@narfation.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230821-batadv-missing-mtu-rtnl-lock-v1-1-1c5a7bfe861e@narfation.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30batman-adv: Fix batadv_v_ogm_aggr_send memory leakRemi Pommarel
commit 421d467dc2d483175bad4fb76a31b9e5a3d744cf upstream. When batadv_v_ogm_aggr_send is called for an inactive interface, the skb is silently dropped by batadv_v_ogm_send_to_if() but never freed causing the following memory leak: unreferenced object 0xffff00000c164800 (size 512): comm "kworker/u8:1", pid 2648, jiffies 4295122303 (age 97.656s) hex dump (first 32 bytes): 00 80 af 09 00 00 ff ff e1 09 00 00 75 01 60 83 ............u.`. 1f 00 00 00 b8 00 00 00 15 00 05 00 da e3 d3 64 ...............d backtrace: [<0000000007ad20f6>] __kmalloc_track_caller+0x1a8/0x310 [<00000000d1029e55>] kmalloc_reserve.constprop.0+0x70/0x13c [<000000008b9d4183>] __alloc_skb+0xec/0x1fc [<00000000c7af5051>] __netdev_alloc_skb+0x48/0x23c [<00000000642ee5f5>] batadv_v_ogm_aggr_send+0x50/0x36c [<0000000088660bd7>] batadv_v_ogm_aggr_work+0x24/0x40 [<0000000042fc2606>] process_one_work+0x3b0/0x610 [<000000002f2a0b1c>] worker_thread+0xa0/0x690 [<0000000059fae5d4>] kthread+0x1fc/0x210 [<000000000c587d3a>] ret_from_fork+0x10/0x20 Free the skb in that case to fix this leak. Cc: stable@vger.kernel.org Fixes: 0da0035942d4 ("batman-adv: OGMv2 - add basic infrastructure") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30batman-adv: Fix TT global entry leak when client roamed backRemi Pommarel
commit d25ddb7e788d34cf27ff1738d11a87cb4b67d446 upstream. When a client roamed back to a node before it got time to destroy the pending local entry (i.e. within the same originator interval) the old global one is directly removed from hash table and left as such. But because this entry had an extra reference taken at lookup (i.e using batadv_tt_global_hash_find) there is no way its memory will be reclaimed at any time causing the following memory leak: unreferenced object 0xffff0000073c8000 (size 18560): comm "softirq", pid 0, jiffies 4294907738 (age 228.644s) hex dump (first 32 bytes): 06 31 ac 12 c7 7a 05 00 01 00 00 00 00 00 00 00 .1...z.......... 2c ad be 08 00 80 ff ff 6c b6 be 08 00 80 ff ff ,.......l....... backtrace: [<00000000ee6e0ffa>] kmem_cache_alloc+0x1b4/0x300 [<000000000ff2fdbc>] batadv_tt_global_add+0x700/0xe20 [<00000000443897c7>] _batadv_tt_update_changes+0x21c/0x790 [<000000005dd90463>] batadv_tt_update_changes+0x3c/0x110 [<00000000a2d7fc57>] batadv_tt_tvlv_unicast_handler_v1+0xafc/0xe10 [<0000000011793f2a>] batadv_tvlv_containers_process+0x168/0x2b0 [<00000000b7cbe2ef>] batadv_recv_unicast_tvlv+0xec/0x1f4 [<0000000042aef1d8>] batadv_batman_skb_recv+0x25c/0x3a0 [<00000000bbd8b0a2>] __netif_receive_skb_core.isra.0+0x7a8/0xe90 [<000000004033d428>] __netif_receive_skb_one_core+0x64/0x74 [<000000000f39a009>] __netif_receive_skb+0x48/0xe0 [<00000000f2cd8888>] process_backlog+0x174/0x344 [<00000000507d6564>] __napi_poll+0x58/0x1f4 [<00000000b64ef9eb>] net_rx_action+0x504/0x590 [<00000000056fa5e4>] _stext+0x1b8/0x418 [<00000000878879d6>] run_ksoftirqd+0x74/0xa4 unreferenced object 0xffff00000bae1a80 (size 56): comm "softirq", pid 0, jiffies 4294910888 (age 216.092s) hex dump (first 32 bytes): 00 78 b1 0b 00 00 ff ff 0d 50 00 00 00 00 00 00 .x.......P...... 00 00 00 00 00 00 00 00 50 c8 3c 07 00 00 ff ff ........P.<..... backtrace: [<00000000ee6e0ffa>] kmem_cache_alloc+0x1b4/0x300 [<00000000d9aaa49e>] batadv_tt_global_add+0x53c/0xe20 [<00000000443897c7>] _batadv_tt_update_changes+0x21c/0x790 [<000000005dd90463>] batadv_tt_update_changes+0x3c/0x110 [<00000000a2d7fc57>] batadv_tt_tvlv_unicast_handler_v1+0xafc/0xe10 [<0000000011793f2a>] batadv_tvlv_containers_process+0x168/0x2b0 [<00000000b7cbe2ef>] batadv_recv_unicast_tvlv+0xec/0x1f4 [<0000000042aef1d8>] batadv_batman_skb_recv+0x25c/0x3a0 [<00000000bbd8b0a2>] __netif_receive_skb_core.isra.0+0x7a8/0xe90 [<000000004033d428>] __netif_receive_skb_one_core+0x64/0x74 [<000000000f39a009>] __netif_receive_skb+0x48/0xe0 [<00000000f2cd8888>] process_backlog+0x174/0x344 [<00000000507d6564>] __napi_poll+0x58/0x1f4 [<00000000b64ef9eb>] net_rx_action+0x504/0x590 [<00000000056fa5e4>] _stext+0x1b8/0x418 [<00000000878879d6>] run_ksoftirqd+0x74/0xa4 Releasing the extra reference from batadv_tt_global_hash_find even at roam back when batadv_tt_global_free is called fixes this memory leak. Cc: stable@vger.kernel.org Fixes: 068ee6e204e1 ("batman-adv: roaming handling mechanism redesign") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by; Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30batman-adv: Do not get eth header before batadv_check_management_packetRemi Pommarel
commit eac27a41ab641de074655d2932fc7f8cdb446881 upstream. If received skb in batadv_v_elp_packet_recv or batadv_v_ogm_packet_recv is either cloned or non linearized then its data buffer will be reallocated by batadv_check_management_packet when skb_cow or skb_linearize get called. Thus geting ethernet header address inside skb data buffer before batadv_check_management_packet had any chance to reallocate it could lead to the following kernel panic: Unable to handle kernel paging request at virtual address ffffff8020ab069a Mem abort info: ESR = 0x96000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000040f45000 [ffffff8020ab069a] pgd=180000007fffa003, p4d=180000007fffa003, pud=180000007fffa003, pmd=180000007fefe003, pte=0068000020ab0706 Internal error: Oops: 96000007 [#1] SMP Modules linked in: ahci_mvebu libahci_platform libahci dvb_usb_af9035 dvb_usb_dib0700 dib0070 dib7000m dibx000_common ath11k_pci ath10k_pci ath10k_core mwl8k_new nf_nat_sip nf_conntrack_sip xhci_plat_hcd xhci_hcd nf_nat_pptp nf_conntrack_pptp at24 sbsa_gwdt CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.15.42-00066-g3242268d425c-dirty #550 Hardware name: A8k (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : batadv_is_my_mac+0x60/0xc0 lr : batadv_v_ogm_packet_recv+0x98/0x5d0 sp : ffffff8000183820 x29: ffffff8000183820 x28: 0000000000000001 x27: ffffff8014f9af00 x26: 0000000000000000 x25: 0000000000000543 x24: 0000000000000003 x23: ffffff8020ab0580 x22: 0000000000000110 x21: ffffff80168ae880 x20: 0000000000000000 x19: ffffff800b561000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 00dc098924ae0032 x14: 0f0405433e0054b0 x13: ffffffff00000080 x12: 0000004000000001 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : ffffffc076dae000 x6 : ffffff8000183700 x5 : ffffffc00955e698 x4 : ffffff80168ae000 x3 : ffffff80059cf000 x2 : ffffff800b561000 x1 : ffffff8020ab0696 x0 : ffffff80168ae880 Call trace: batadv_is_my_mac+0x60/0xc0 batadv_v_ogm_packet_recv+0x98/0x5d0 batadv_batman_skb_recv+0x1b8/0x244 __netif_receive_skb_core.isra.0+0x440/0xc74 __netif_receive_skb_one_core+0x14/0x20 netif_receive_skb+0x68/0x140 br_pass_frame_up+0x70/0x80 br_handle_frame_finish+0x108/0x284 br_handle_frame+0x190/0x250 __netif_receive_skb_core.isra.0+0x240/0xc74 __netif_receive_skb_list_core+0x6c/0x90 netif_receive_skb_list_internal+0x1f4/0x310 napi_complete_done+0x64/0x1d0 gro_cell_poll+0x7c/0xa0 __napi_poll+0x34/0x174 net_rx_action+0xf8/0x2a0 _stext+0x12c/0x2ac run_ksoftirqd+0x4c/0x7c smpboot_thread_fn+0x120/0x210 kthread+0x140/0x150 ret_from_fork+0x10/0x20 Code: f9403844 eb03009f 54fffee1 f94 Thus ethernet header address should only be fetched after batadv_check_management_packet has been called. Fixes: 0da0035942d4 ("batman-adv: OGMv2 - add basic infrastructure") Cc: stable@vger.kernel.org Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30batman-adv: Don't increase MTU when set by userSven Eckelmann
commit d8e42a2b0addf238be8b3b37dcd9795a5c1be459 upstream. If the user set an MTU value, it usually means that there are special requirements for the MTU. But if an interface gots activated, the MTU was always recalculated and then the user set value was overwritten. The only reason why this user set value has to be overwritten, is when the MTU has to be decreased because batman-adv is not able to transfer packets with the user specified size. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30batman-adv: Trigger events for auto adjusted MTUSven Eckelmann
commit c6a953cce8d0438391e6da48c8d0793d3fbfcfa6 upstream. If an interface changes the MTU, it is expected that an NETDEV_PRECHANGEMTU and NETDEV_CHANGEMTU notification events is triggered. This worked fine for .ndo_change_mtu based changes because core networking code took care of it. But for auto-adjustments after hard-interfaces changes, these events were simply missing. Due to this problem, non-batman-adv components weren't aware of MTU changes and thus couldn't perform their own tasks correctly. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30selinux: set next pointer before attaching to listChristian Göttsche
commit 70d91dc9b2ac91327d0eefd86163abc3548effa6 upstream. Set the next pointer in filename_trans_read_helper() before attaching the new node under construction to the list, otherwise garbage would be dereferenced on subsequent failure during cleanup in the out goto label. Cc: <stable@vger.kernel.org> Fixes: 430059024389 ("selinux: implement new format of filename transitions") Signed-off-by: Christian Göttsche <cgzones@googlemail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 20:18:01 +0000