| Age | Commit message (Collapse) | Author |
|---|
|
Pull xfs fixes from Carlos Maiolino:
- Fix integer overflow in xrep_bmap
- Fix stale dealloc punching for COW IO
* tag 'xfs-6.12-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: punch delalloc extents from the COW fork for COW writes
xfs: set IOMAP_F_SHARED for all COW fork allocations
xfs: share more code in xfs_buffered_write_iomap_begin
xfs: support the COW fork in xfs_bmap_punch_delalloc_range
xfs: IOMAP_ZERO and IOMAP_UNSHARE already hold invalidate_lock
xfs: take XFS_MMAPLOCK_EXCL xfs_file_write_zero_eof
xfs: factor out a xfs_file_write_zero_eof helper
iomap: move locking out of iomap_write_delalloc_release
iomap: remove iomap_file_buffered_write_punch_delalloc
iomap: factor out a iomap_last_written_block helper
xfs: fix integer overflow in xrep_bmap
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two issues in the amd-pstate cpufreq driver and update the
intel_rapl power capping driver with a new processor ID.
Specifics:
- Enable ACPI CPPC in amd_pstate_register_driver() after disabling it
in amd_pstate_unregister_driver() when switching driver operation
modes (Dhananjay Ugwekar)
- Make amd-pstate use nominal performance as the maximum performance
level when boost is disabled (Mario Limonciello)
- Add ArrowLake-H to the list of processors where PL4 is supported in
the MSR part of the intel_rapl power capping driver (Srinivas
Pandruvada)"
* tag 'pm-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl_msr: Add PL4 support for ArrowLake-H
cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled
cpufreq/amd-pstate: Fix amd_pstate mode switch on shared memory systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix auto-detect regression in jc42 driver"
* tag 'hwmon-for-v6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
[PATCH} hwmon: (jc42) Properly detect TSE2004-compliant devices again
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, msm and xe are the two main ones, with a bunch of
scattered fixes including a largish revert in mgag200, then amdgpu,
vmwgfx and scattering of other minor ones.
All seems pretty regular.
msm:
- Display:
- move CRTC resource assignment to atomic_check otherwise to make
consecutive calls to atomic_check() consistent
- fix rounding / sign-extension issues with pclk calculation in
case of DSC
- cleanups to drop incorrect null checks in dpu snapshots
- fix to use kvzalloc in dpu snapshot to avoid allocation issues
in heavily loaded system cases
- Fix to not program merge_3d block if dual LM is not being used
- Fix to not flush merge_3d block if its not enabled otherwise
this leads to false timeouts
- GPU:
- a7xx: add a fence wait before SMMU table update
xe:
- New workaround to Xe2 (Aradhya)
- Fix unbalanced rpm put (Matthew Auld)
- Remove fragile lock optimization (Matthew Brost)
- Fix job release, delegating it to the drm scheduler (Matthew Brost)
- Fix timestamp bit width for Xe2 (Lucas)
- Fix external BO's dma-resv usag (Matthew Brost)
- Fix returning success for timeout in wait_token (Nirmoy)
- Initialize fence to avoid it being detected as signaled (Matthew
Auld)
- Improve cache flush for BMG (Matthew Auld)
- Don't allow hflip for tile4 framebuffer on Xe2 (Juha-Pekka)
amdgpu:
- SR-IOV fix
- CS chunk handling fix
- MES fixes
- SMU13 fixes
amdkfd:
- VRAM usage reporting fix
radeon:
- Fix possible_clones handling
i915:
- Two DP bandwidth related MST fixes
ast:
- Clear EDID on unplugged connectors
host1x:
- Fix boot on Tegra186
- Set DMA parameters
mgag200:
- Revert VBLANK support
panel:
- himax-hx83192: Adjust power and gamma
qaic:
- Sgtable loop fixes
vmwgfx:
- Limit display layout allocatino size
- Handle allocation errors in connector checks
- Clean up KMS code for 2d-only setup
- Report surface-check errors correctly
- Remove NULL test around kvfree()"
* tag 'drm-fixes-2024-10-18' of https://gitlab.freedesktop.org/drm/kernel: (45 commits)
drm/ast: vga: Clear EDID if no display is connected
drm/ast: sil164: Clear EDID if no display is connected
Revert "drm/mgag200: Add vblank support"
drm/amdgpu/swsmu: default to fullscreen 3D profile for dGPUs
drm/i915/display: Don't allow tile4 framebuffer to do hflip on display20 or greater
drm/xe/bmg: improve cache flushing behaviour
drm/xe/xe_sync: initialise ufence.signalled
drm/xe/ufence: ufence can be signaled right after wait_woken
drm/xe: Use bookkeep slots for external BO's in exec IOCTL
drm/xe/query: Increase timestamp width
drm/xe: Don't free job in TDR
drm/xe: Take job list lock in xe_sched_add_pending_job
drm/xe: fix unbalanced rpm put() with declare_wedged()
drm/xe: fix unbalanced rpm put() with fence_fini()
drm/xe/xe2lpg: Extend Wa_15016589081 for xe2lpg
drm/i915/dp_mst: Don't require DSC hblank quirk for a non-DSC compatible mode
drm/i915/dp_mst: Handle error during DSC BW overhead/slice calculation
drm/msm/a6xx+: Insert a fence wait before SMMU table update
drm/msm/dpu: don't always program merge_3d block
drm/msm/dpu: Don't always set merge_3d pending flush
...
|
|
The lockdep asserts for the new follow_pfnmap() API "knows" that a
pfnmap always has a vma->vm_file, since that's the only way to create
such a mapping.
And that's actually true for all the normal cases. But not for the mmap
failure case, where the incomplete mapping is torn down and we have
cleared vma->vm_file because the failure occured before the file was
linked to the vma.
So this codepath does actually need to check for vm_file being NULL.
Reported-by: Jann Horn <jannh@google.com>
Fixes: 6da8e9634bb7 ("mm: new follow_pfnmap API")
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge amd-pstate driver fixes for 6.12-rc4:
- Enable ACPI CPPC in amd_pstate_register_driver() after disabling
it in amd_pstate_unregister_driver() during driver operation mode
switch (Dhananjay Ugwekar).
- Make amd-pstate use nominal performance as the maximum performance
level when boost is disabled (Mario Limonciello).
* pm-cpufreq:
cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled
cpufreq/amd-pstate: Fix amd_pstate mode switch on shared memory systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"ARM-SMMU fixes from Will Deacon:
- Clarify warning message when failing to disable the MMU-500
prefetcher
- Fix undefined behaviour in calculation of L1 stream-table index
when 32-bit StreamIDs are implemented
- Replace a rogue comma with a semicolon
Intel VT-d fix from Lu Baolu:
- Fix incorrect pci_for_each_dma_alias() for non-PCI devices"
* tag 'iommu-fixes-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Fix incorrect pci_for_each_dma_alias() for non-PCI devices
iommu/arm-smmu-v3: Convert comma to semicolon
iommu/arm-smmu-v3: Fix last_sid_idx calculation for sid_bits==32
iommu/arm-smmu: Clarify MMU-500 CPRE workaround
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Madhavan Srinivasan:
- To prevent possible memory leak, free "name" on error in
opal_event_init()
Thanks to Michael Ellerman and 2639161967.
* tag 'powerpc-6.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: Free name on error in opal_event_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix PCI error recovery by handling error events correctly
- Fix CCA crypto card behavior within protected execution environment
- Two KVM commits which fix virtual vs physical address handling bugs
in KVM pfault handling
- Fix return code handling in pckmo_key2protkey()
- Deactivate sclp console as late as possible so that outstanding
messages appear on the console instead of being dropped on reboot
- Convert newlines to CRLF instead of LFCR for the sclp vt220 driver,
as required by the vt220 specification
- Initialize also psw mask in perf_arch_fetch_caller_regs() to make
sure that user_mode(regs) will return false
- Update defconfigs
* tag 's390-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: Update defconfigs
s390: Initialize psw mask in perf_arch_fetch_caller_regs()
s390/sclp_vt220: Convert newlines to CRLF instead of LFCR
s390/sclp: Deactivate sclp after all its users
s390/pkey_pckmo: Return with success for valid protected key types
KVM: s390: Change virtual to physical address access in diag 0x258 handler
KVM: s390: gaccess: Check if guest address is in memslot
s390/ap: Fix CCA crypto card behavior within protected execution environment
s390/pci: Handle PCI error codes other than 0x3a
|
|
rts5228, rts5261, rts5264 are supported by the rtsx_pci driver, but
they are not mentioned in the Kconfig help when the code was added.
List those models in the Kconfig help accordingly.
Signed-off-by: Yo-Jung Lin (Leo) <0xff07@gmail.com>
Link: https://lore.kernel.org/r/20241017144747.15966-1-0xff07@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove some entries due to various compliance requirements. They can come
back in the future if sufficient documentation is provided.
Link: https://lore.kernel.org/r/2024101835-tiptop-blip-09ed@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.12-rc4
Here are some new modem device ids.
Everything has been in linux-next over night with no reported issues.
* tag 'usb-serial-6.12-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit FN920C04 MBIM compositions
USB: serial: option: add support for Quectel EG916Q-GL
|
|
Commit 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev")
adds a weak reverse dependency to the config XEN_PRIVCMD definition, that
dependency causes xen-privcmd can't be loaded on domU, because dependent
xen-pciback isn't always be loaded successfully on domU.
To solve above problem, remove that dependency, and do not call
pcistub_get_gsi_from_sbdf() directly, instead add a hook in
drivers/xen/apci.c, xen-pciback register the real call function, then in
privcmd_ioctl_pcidev_get_gsi call that hook.
Fixes: 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241012084537.1543059-1-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- New workaround to Xe2 (Aradhya)
- Fix unbalanced rpm put (Matthew Auld)
- Remove fragile lock optimization (Matthew Brost)
- Fix job release, delegating it to the drm scheduler (Matthew Brost)
- Fix timestamp bit width for Xe2 (Lucas)
- Fix external BO's dma-resv usag (Matthew Brost)
- Fix returning success for timeout in wait_token (Nirmoy)
- Initialize fence to avoid it being detected as signaled (Matthew Auld)
- Improve cache flush for BMG (Matthew Auld)
- Don't allow hflip for tile4 framebuffer on Xe2 (Juha-Pekka)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/jkldrex5733ldxrla75b4ayvhujjhw2kccmasl5rotoufoacj4@pkvlrrv4orc7
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 IBPB fixes from Borislav Petkov:
"This fixes the IBPB implementation of older AMDs (< gen4) that do not
flush the RSB (Return Address Stack) so you can still do some leaking
when using a "=ibpb" mitigation for Retbleed or SRSO. Fix it by doing
the flushing in software on those generations.
IBPB is not the default setting so this is not likely to affect
anybody in practice"
* tag 'x86_bugs_post_ibpb' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Do not use UNTRAIN_RET with IBPB on entry
x86/bugs: Skip RSB fill at VMEXIT
x86/entry: Have entry_ibpb() invalidate return predictions
x86/cpufeatures: Add a IBPB_NO_RET BUG flag
x86/cpufeatures: Define X86_FEATURE_AMD_IBPB_RET
|
|
The barrier_nospec() after the array bounds check is overkill and
painfully slow for arches which implement it.
Furthermore, most arches don't implement it, so they remain exposed to
Spectre v1 (which can affect pretty much any CPU with branch
prediction).
Instead, clamp the user pointer to a valid range so it's guaranteed to
be a valid array index even when the bounds check mispredicts.
Fixes: 8270cb10c068 ("cdrom: Fix spectre-v1 gadget")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/1d86f4d9d8fba68e5ca64cdeac2451b95a8bf872.1729202937.git.jpoimboe@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"28 hotfixes. 13 are cc:stable. 23 are MM.
It is the usual shower of unrelated singletons - please see the
individual changelogs for details"
* tag 'mm-hotfixes-stable-2024-10-17-16-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (28 commits)
maple_tree: add regression test for spanning store bug
maple_tree: correct tree corruption on spanning store
mm/mglru: only clear kswapd_failures if reclaimable
mm/swapfile: skip HugeTLB pages for unuse_vma
selftests: mm: fix the incorrect usage() info of khugepaged
MAINTAINERS: add Jann as memory mapping/VMA reviewer
mm: swap: prevent possible data-race in __try_to_reclaim_swap
mm: khugepaged: fix the incorrect statistics when collapsing large file folios
MAINTAINERS: kasan, kcov: add bugzilla links
mm: don't install PMD mappings when THPs are disabled by the hw/process/vma
mm: huge_memory: add vma_thp_disabled() and thp_disabled_by_hw()
Docs/damon/maintainer-profile: update deprecated awslabs GitHub URLs
Docs/damon/maintainer-profile: add missing '_' suffixes for external web links
maple_tree: check for MA_STATE_BULK on setting wr_rebalance
mm: khugepaged: fix the arguments order in khugepaged_collapse_file trace point
mm/damon/tests/sysfs-kunit.h: fix memory leak in damon_sysfs_test_add_targets()
mm: remove unused stub for can_swapin_thp()
mailmap: add an entry for Andy Chiu
MAINTAINERS: add memory mapping/VMA co-maintainers
fs/proc: fix build with GCC 15 due to -Werror=unterminated-string-initialization
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two clk driver fixes and a unit test fix:
- Terminate the of_device_id table in the Samsung exynosautov920 clk
driver so that device matching logic doesn't run off the end of the
array into other memory and break matching for any kernel with this
driver loaded
- Properly limit the max clk ID in the Rockchip clk driver
- Use clk kunit helpers in the clk tests so that memory isn't leaked
after the test concludes"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: test: Fix some memory leaks
clk: rockchip: fix finding of maximum clock ID
clk: samsung: Fix out-of-bound access of of_match_node()
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
ast:
- Clear EDID on unplugged connectors
host1x:
- Fix boot on Tegra186
- Set DMA parameters
mgag200:
- Revert VBLANK support
panel:
- himax-hx83192: Adjust power and gamma
qaic:
- Sgtable loop fixes
vmwgfx:
- Limit display layout allocatino size
- Handle allocation errors in connector checks
- Clean up KMS code for 2d-only setup
- Report surface-check errors correctly
- Remove NULL test around kvfree()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017115516.GA196624@linux.fritz.box
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Two DP bandwidth related MST fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZxDLdML9Dwqkb1AW@jlahtine-mobl.ger.corp.intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.12-2024-10-16:
amdgpu:
- SR-IOV fix
- CS chunk handling fix
- MES fixes
- SMU13 fixes
amdkfd:
- VRAM usage reporting fix
radeon:
- Fix possible_clones handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016200514.3520286-1-alexander.deucher@amd.com
|
|
Add a maintainers entry now that the PREEMPT_RT bits are merged. Steven
volunteered and asked for the list.
There are no files associated with this entry since it is spread over the
kernel. It serves as entry for people knowing what they look for. There is
a keyword added so if PREEMPT_RT is mentioned somewhere, then the entry
will be picked up.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Pavel Machek <pavel@denx.de>
Link: https://lore.kernel.org/all/20241015151132.Erx81G9f@linutronix.de
|
|
>From memfd_secret(2) manpage:
The memory areas backing the file created with memfd_secret(2) are
visible only to the processes that have access to the file descriptor.
The memory region is removed from the kernel page tables and only the
page tables of the processes holding the file descriptor map the
corresponding physical memory. (Thus, the pages in the region can't be
accessed by the kernel itself, so that, for example, pointers to the
region can't be passed to system calls.)
We need to handle this special case gracefully in build ID fetching
code. Return -EFAULT whenever secretmem file is passed to build_id_parse()
family of APIs. Original report and repro can be found in [0].
[0] https://lore.kernel.org/bpf/ZwyG8Uro%2FSyTXAni@ly-workstation/
Fixes: de3ec364c3c3 ("lib/buildid: add single folio-based file reader abstraction")
Reported-by: Yi Lai <yi1.lai@intel.com>
Suggested-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://lore.kernel.org/bpf/20241017175431.6183-A-hca@linux.ibm.com
Link: https://lore.kernel.org/bpf/20241017174713.2157873-1-andrii@kernel.org
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.12
- Fix target passthrough identifier (Nilay)
- Fix tcp locking (Hannes)
- Replace list with sbitmap for tracking RDMA rsp tags (Guixen)
- Remove unnecessary fallthrough statements (Tokunori)
- Remove ready-without-media support (Greg)
- Fix multipath partition scan deadlock (Keith)
- Fix concurrent PCI reset and remove queue mapping (Maurizio)
- Fabrics shutdown fixes (Nilay)"
* tag 'nvme-6.12-2024-10-18' of git://git.infradead.org/nvme:
nvme: use helper nvme_ctrl_state in nvme_keep_alive_finish function
nvme: make keep-alive synchronous operation
nvme-loop: flush off pending I/O while shutting down loop controller
nvme-pci: fix race condition between reset and nvme_dev_disable()
nvme-multipath: defer partition scanning
nvme: disable CC.CRIME (NVME_CC_CRIME)
nvme: delete unnecessary fallthru comment
nvmet-rdma: use sbitmap to replace rsp free list
nvme: tcp: avoid race between queue_lock lock and destroy
nvmet-passthru: clear EUID/NGUID/UUID while using loop target
block: fix blk_rq_map_integrity_sg kernel-doc
|
|
The current policy management makes it impossible to use IPE
in a general purpose distribution. In such cases the users are not
building the kernel, the distribution is, and access to the private
key included in the trusted keyring is, for obvious reason, not
available.
This means that users have no way to enable IPE, since there will
be no built-in generic policy, and no access to the key to sign
updates validated by the trusted keyring.
Just as we do for dm-verity, kernel modules and more, allow the
secondary and platform keyrings to also validate policies. This
allows users enrolling their own keys in UEFI db or MOK to also
sign policies, and enroll them. This makes it sensible to enable
IPE in general purpose distributions, as it becomes usable by
any user wishing to do so. Keys in these keyrings can already
load kernels and kernel modules, so there is no security
downgrade.
Add a kconfig each, like dm-verity does, but default to enabled if
the dependencies are available.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
[FW: fixed some style issues]
Signed-off-by: Fan Wu <wufan@kernel.org>
|
|
Currently IPE accepts an update that has the same version as the policy
being updated, but it doesn't make it a no-op nor it checks that the
old and new policyes are the same. So it is possible to change the
content of a policy, without changing its version. This is very
confusing from userspace when managing policies.
Instead change the update logic to reject updates that have the same
version with ESTALE, as that is much clearer and intuitive behaviour.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Fan Wu <wufan@kernel.org>
|
|
version
When loading policies in userspace we want a recognizable error when an
update attempts to use an old policy, as that is an error that needs
to be treated differently from an invalid policy. Use -ESTALE as it is
clear enough for an update mechanism.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Fan Wu <wufan@kernel.org>
|
|
We no more need acquiring ctrl->lock before accessing the
NVMe controller state and instead we can now use the helper
nvme_ctrl_state. So replace the use of ctrl->lock from
nvme_keep_alive_finish function with nvme_ctrl_state call.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The nvme keep-alive operation, which executes at a periodic interval,
could potentially sneak in while shutting down a fabric controller.
This may lead to a race between the fabric controller admin queue
destroy code path (invoked while shutting down controller) and hw/hctx
queue dispatcher called from the nvme keep-alive async request queuing
operation. This race could lead to the kernel crash shown below:
Call Trace:
autoremove_wake_function+0x0/0xbc (unreliable)
__blk_mq_sched_dispatch_requests+0x114/0x24c
blk_mq_sched_dispatch_requests+0x44/0x84
blk_mq_run_hw_queue+0x140/0x220
nvme_keep_alive_work+0xc8/0x19c [nvme_core]
process_one_work+0x200/0x4e0
worker_thread+0x340/0x504
kthread+0x138/0x140
start_kernel_thread+0x14/0x18
While shutting down fabric controller, if nvme keep-alive request sneaks
in then it would be flushed off. The nvme_keep_alive_end_io function is
then invoked to handle the end of the keep-alive operation which
decrements the admin->q_usage_counter and assuming this is the last/only
request in the admin queue then the admin->q_usage_counter becomes zero.
If that happens then blk-mq destroy queue operation (blk_mq_destroy_
queue()) which could be potentially running simultaneously on another
cpu (as this is the controller shutdown code path) would forward
progress and deletes the admin queue. So, now from this point onward
we are not supposed to access the admin queue resources. However the
issue here's that the nvme keep-alive thread running hw/hctx queue
dispatch operation hasn't yet finished its work and so it could still
potentially access the admin queue resource while the admin queue had
been already deleted and that causes the above crash.
This fix helps avoid the observed crash by implementing keep-alive as a
synchronous operation so that we decrement admin->q_usage_counter only
after keep-alive command finished its execution and returns the command
status back up to its caller (blk_execute_rq()). This would ensure that
fabric shutdown code path doesn't destroy the fabric admin queue until
keep-alive request finished execution and also keep-alive thread is not
running hw/hctx queue dispatch operation.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
While shutting down loop controller, we first quiesce the admin/IO queue,
delete the admin/IO tag-set and then at last destroy the admin/IO queue.
However it's quite possible that during the window between quiescing and
destroying of the admin/IO queue, some admin/IO request might sneak in
and if that happens then we could potentially encounter a hung task
because shutdown operation can't forward progress until any pending I/O
is flushed off.
This commit helps ensure that before destroying the admin/IO queue, we
unquiesce the admin/IO queue so that any outstanding requests, which are
added after the admin/IO queue is quiesced, are now flushed to its
completion.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add a small BPF verifier test case to ensure that alu32 additions to
registers are not subject to linked scalar delta tracking.
# ./vmtest.sh -- ./test_progs -t verifier_linked_scalars
[...]
./test_progs -t verifier_linked_scalars
[ 1.413138] tsc: Refined TSC clocksource calibration: 3407.993 MHz
[ 1.413524] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fcd52370, max_idle_ns: 440795242006 ns
[ 1.414223] clocksource: Switched to clocksource tsc
[ 1.419640] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.420025] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
#500/1 verifier_linked_scalars/scalars: find linked scalars:OK
#500 verifier_linked_scalars:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
[ 1.590858] ACPI: PM: Preparing to enter system sleep state S5
[ 1.591402] reboot: Power down
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20241016134913.32249-3-daniel@iogearbox.net
|
|
print_reg_state() should not consider adding reg->off to reg->var_off.value
when dumping scalars. Scalars can be produced with reg->off != 0 through
BPF_ADD_CONST, and thus as-is this can skew the register log dump.
Fixes: 98d7ca374ba4 ("bpf: Track delta between "linked" registers.")
Reported-by: Nathaniel Theis <nathaniel.theis@nccgroup.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241016134913.32249-2-daniel@iogearbox.net
|
|
Nathaniel reported a bug in the linked scalar delta tracking, which can lead
to accepting a program with OOB access. The specific code is related to the
sync_linked_regs() function and the BPF_ADD_CONST flag, which signifies a
constant offset between two scalar registers tracked by the same register id.
The verifier attempts to track "similar" scalars in order to propagate bounds
information learned about one scalar to others. For instance, if r1 and r2
are known to contain the same value, then upon encountering 'if (r1 != 0x1234)
goto xyz', not only does it know that r1 is equal to 0x1234 on the path where
that conditional jump is not taken, it also knows that r2 is.
Additionally, with env->bpf_capable set, the verifier will track scalars
which should be a constant delta apart (if r1 is known to be one greater than
r2, then if r1 is known to be equal to 0x1234, r2 must be equal to 0x1233.)
The code path for the latter in adjust_reg_min_max_vals() is reached when
processing both 32 and 64-bit addition operations. While adjust_reg_min_max_vals()
knows whether dst_reg was produced by a 32 or a 64-bit addition (based on the
alu32 bool), the only information saved in dst_reg is the id of the source
register (reg->id, or'ed by BPF_ADD_CONST) and the value of the constant
offset (reg->off).
Later, the function sync_linked_regs() will attempt to use this information
to propagate bounds information from one register (known_reg) to others,
meaning, for all R in linked_regs, it copies known_reg range (and possibly
adjusting delta) into R for the case of R->id == known_reg->id.
For the delta adjustment, meaning, matching reg->id with BPF_ADD_CONST, the
verifier adjusts the register as reg = known_reg; reg += delta where delta
is computed as (s32)reg->off - (s32)known_reg->off and placed as a scalar
into a fake_reg to then simulate the addition of reg += fake_reg. This is
only correct, however, if the value in reg was created by a 64-bit addition.
When reg contains the result of a 32-bit addition operation, its upper 32
bits will always be zero. sync_linked_regs() on the other hand, may cause
the verifier to believe that the addition between fake_reg and reg overflows
into those upper bits. For example, if reg was generated by adding the
constant 1 to known_reg using a 32-bit alu operation, then reg->off is 1
and known_reg->off is 0. If known_reg is known to be the constant 0xFFFFFFFF,
sync_linked_regs() will tell the verifier that reg is equal to the constant
0x100000000. This is incorrect as the actual value of reg will be 0, as the
32-bit addition will wrap around.
Example:
0: (b7) r0 = 0; R0_w=0
1: (18) r1 = 0x80000001; R1_w=0x80000001
3: (37) r1 /= 1; R1_w=scalar()
4: (bf) r2 = r1; R1_w=scalar(id=1) R2_w=scalar(id=1)
5: (bf) r4 = r1; R1_w=scalar(id=1) R4_w=scalar(id=1)
6: (04) w2 += 2147483647; R2_w=scalar(id=1+2147483647,smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
7: (04) w4 += 0 ; R4_w=scalar(id=1+0,smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
8: (15) if r2 == 0x0 goto pc+1
10: R0=0 R1=0xffffffff80000001 R2=0x7fffffff R4=0xffffffff80000001 R10=fp0
What can be seen here is that r1 is copied to r2 and r4, such that {r1,r2,r4}.id
are all the same which later lets sync_linked_regs() to be invoked. Then, in
a next step constants are added with alu32 to r2 and r4, setting their ->off,
as well as id |= BPF_ADD_CONST. Next, the conditional will bind r2 and
propagate ranges to its linked registers. The verifier now believes the upper
32 bits of r4 are r4=0xffffffff80000001, while actually r4=r1=0x80000001.
One approach for a simple fix suitable also for stable is to limit the constant
delta tracking to only 64-bit alu addition. If necessary at some later point,
BPF_ADD_CONST could be split into BPF_ADD_CONST64 and BPF_ADD_CONST32 to avoid
mixing the two under the tradeoff to further complicate sync_linked_regs().
However, none of the added tests from dedf56d775c0 ("selftests/bpf: Add tests
for add_const") make this necessary at this point, meaning, BPF CI also passes
with just limiting tracking to 64-bit alu addition.
Fixes: 98d7ca374ba4 ("bpf: Track delta between "linked" registers.")
Reported-by: Nathaniel Theis <nathaniel.theis@nccgroup.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20241016134913.32249-1-daniel@iogearbox.net
|
|
Previously test_task_tid was setting `linfo.task.tid`
to `getpid()` which is the same as `gettid()` for the
parent process. Instead create a new child thread
and set `linfo.task.tid` to `gettid()` to make sure
the tid filtering logic is working as expected.
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241016210048.1213935-2-linux@jordanrome.com
|
|
In userspace, you can add a tid filter by setting
the "task.tid" field for "bpf_iter_link_info".
However, `get_pid_task` when called for the
`BPF_TASK_ITER_TID` type should have been using
`PIDTYPE_PID` (tid) instead of `PIDTYPE_TGID` (pid).
Fixes: f0d74c4da1f0 ("bpf: Parameterize task iterators.")
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241016210048.1213935-1-linux@jordanrome.com
|
|
nvme_dev_disable() modifies the dev->online_queues field, therefore
nvme_pci_update_nr_queues() should avoid racing against it, otherwise
we could end up passing invalid values to blk_mq_update_nr_hw_queues().
WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347
pci_irq_get_affinity+0x187/0x210
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
RIP: 0010:pci_irq_get_affinity+0x187/0x210
Call Trace:
<TASK>
? blk_mq_pci_map_queues+0x87/0x3c0
? pci_irq_get_affinity+0x187/0x210
blk_mq_pci_map_queues+0x87/0x3c0
nvme_pci_map_queues+0x189/0x460 [nvme]
blk_mq_update_nr_hw_queues+0x2a/0x40
nvme_reset_work+0x1be/0x2a0 [nvme]
Fix the bug by locking the shutdown_lock mutex before using
dev->online_queues. Give up if nvme_dev_disable() is running or if
it has been executed already.
Fixes: 949928c1c731 ("NVMe: Fix possible queue use after freed")
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Disable software tag-based KASAN when compiling with GCC, as
functions are incorrectly instrumented leading to a crash early
during boot
- Fix pkey configuration for kernel threads when POE is enabled
- Fix invalid memory accesses in uprobes when targetting load-literal
instructions
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
kasan: Disable Software Tag-Based KASAN with GCC
Documentation/protection-keys: add AArch64 to documentation
arm64: set POR_EL0 for kernel threads
arm64: probes: Fix uprobes for big-endian kernels
arm64: probes: Fix simulate_ldr*_literal()
arm64: probes: Remove broken LDR (literal) uprobe support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Most of the fixes this time are for platform specific drivers,
addressing issues found through build testing on freescale, ep93xx,
starfive, and npcm platforms, as as well as the ffa firmware.
The fixes for the scmi firmware driver address compatibility problems
found on broadcom machines.
There are only two devicetree fixes, addressing incorrect in
configuration on broadcom and marvell machines.
The changes to the Documentation and MAINTAINERS files are for
clarification only"
* tag 'arm-fixes-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: arm_ffa: Avoid string-fortify warning caused by memcpy()
firmware: arm_scmi: Queue in scmi layer for mailbox implementation
firmware: arm_ffa: Avoid string-fortify warning in export_uuid()
firmware: arm_scmi: Give SMC transport precedence over mailbox
firmware: arm_scmi: Fix the double free in scmi_debugfs_common_setup()
Documentation/process: maintainer-soc: clarify submitting patches
dmaengine: cirrus: check that output may be truncated
dmaengine: cirrus: ERR_CAST() ioremap error
MAINTAINERS: use the canonical soc mailing list address and mark it as L:
ARM: dts: bcm2837-rpi-cm3-io3: Fix HDMI hpd-gpio pin
arm64: dts: marvell: cn9130-sr-som: fix cp0 mdio pin numbers
soc: fsl: cpm1: qmc: Fix unused data compilation warning
soc: fsl: cpm1: qmc: Do not use IS_ERR_VALUE() on error pointers
reset: starfive: jh71x0: Fix accessing the empty member on JH7110 SoC
reset: npcm: convert comma to semicolon
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes, nothing really stands out:
- Usual HD-audio quirks / device-specific fixes
- Kconfig dependency fix for UM
- A series of minor fixes for SoundWire
- Updates of USB-audio LINE6 contact address"
* tag 'sound-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/conexant - Use cached pin control for Node 0x1d on HP EliteOne 1000 G2
ALSA/hda: intel-sdw-acpi: add support for sdw-manager-list property read
ALSA/hda: intel-sdw-acpi: simplify sdw-master-count property read
ALSA/hda: intel-sdw-acpi: fetch fwnode once in sdw_intel_scan_controller()
ALSA/hda: intel-sdw-acpi: cleanup sdw_intel_scan_controller
ALSA: hda/tas2781: Add new quirk for Lenovo, ASUS, Dell projects
ALSA: scarlett2: Add error check after retrieving PEQ filter values
ALSA: hda/cs8409: Fix possible NULL dereference
sound: Make CONFIG_SND depend on INDIRECT_IOMEM instead of UML
ALSA: line6: update contact information
ALSA: usb-audio: Fix NULL pointer deref in snd_usb_power_domain_set()
ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2
ALSA: hda: Sound support for HP Spectre x360 16 inch model 2024
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Current release - new code bugs:
- eth: mlx5: HWS, don't destroy more bwc queue locks than allocated
Previous releases - regressions:
- ipv4: give an IPv4 dev to blackhole_netdev
- udp: compute L4 checksum as usual when not segmenting the skb
- tcp/dccp: don't use timer_pending() in reqsk_queue_unlink().
- eth: mlx5e: don't call cleanup on profile rollback failure
- eth: microchip: vcap api: fix memory leaks in
vcap_api_encode_rule_test()
- eth: enetc: disable Tx BD rings after they are empty
- eth: macb: avoid 20s boot delay by skipping MDIO bus registration
for fixed-link PHY
Previous releases - always broken:
- posix-clock: fix missing timespec64 check in pc_clock_settime()
- genetlink: hold RCU in genlmsg_mcast()
- mptcp: prevent MPC handshake on port-based signal endpoints
- eth: vmxnet3: fix packet corruption in vmxnet3_xdp_xmit_frame
- eth: stmmac: dwmac-tegra: fix link bring-up sequence
- eth: bcmasp: fix potential memory leak in bcmasp_xmit()
Misc:
- add Andrew Lunn as a co-maintainer of all networking drivers"
* tag 'net-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5e: Don't call cleanup on profile rollback failure
net/mlx5: Unregister notifier on eswitch init failure
net/mlx5: Fix command bitmask initialization
net/mlx5: Check for invalid vector index on EQ creation
net/mlx5: HWS, use lock classes for bwc locks
net/mlx5: HWS, don't destroy more bwc queue locks than allocated
net/mlx5: HWS, fixed double free in error flow of definer layout
net/mlx5: HWS, removed wrong access to a number of rules variable
mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
net: ethernet: mtk_eth_soc: fix memory corruption during fq dma init
vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame
net: dsa: vsc73xx: fix reception from VLAN-unaware bridges
net: ravb: Only advertise Rx/Tx timestamps if hardware supports it
net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test()
net: phy: mdio-bcm-unimac: Add BCM6846 support
dt-bindings: net: brcm,unimac-mdio: Add bcm6846-mdio
udp: Compute L4 checksum as usual when not segmenting the skb
genetlink: hold RCU in genlmsg_mcast()
net: dsa: mv88e6xxx: Fix the max_vid definition for the MV88E6361
tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().
...
|
|
Not all virtual addresses have physical addresses, such as if they were
vmalloc'd. Just trace the virtual address instead of trying to trace a
physical address. This aligns with the API, and is good enough to
associate dma_alloc with dma_free.
Fixes: 038eb433dc14 ("dma-mapping: add tracing for dma-mapping API calls")
Reported-by: syzbot+b4bfacdec173efaa8567@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/670ebde5.050a0220.d9b66.0154.GAE@google.com/
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add a regression test to assert that, when performing a spanning store
which consumes the entirety of the rightmost right leaf node does not
result in maple tree corruption when doing so.
This achieves this by building a test tree of 3 levels and establishing a
store which ultimately results in a spanned store of this nature.
Link: https://lkml.kernel.org/r/30cdc101a700d16e03ba2f9aa5d83f2efa894168.1728314403.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "maple_tree: correct tree corruption on spanning store", v3.
There has been a nasty yet subtle maple tree corruption bug that appears
to have been in existence since the inception of the algorithm.
This bug seems far more likely to happen since commit f8d112a4e657
("mm/mmap: avoid zeroing vma tree in mmap_region()"), which is the point
at which reports started to be submitted concerning this bug.
We were made definitely aware of the bug thanks to the kind efforts of
Bert Karwatzki who helped enormously in my being able to track this down
and identify the cause of it.
The bug arises when an attempt is made to perform a spanning store across
two leaf nodes, where the right leaf node is the rightmost child of the
shared parent, AND the store completely consumes the right-mode node.
This results in mas_wr_spanning_store() mitakenly duplicating the new and
existing entries at the maximum pivot within the range, and thus maple
tree corruption.
The fix patch corrects this by detecting this scenario and disallowing the
mistaken duplicate copy.
The fix patch commit message goes into great detail as to how this occurs.
This series also includes a test which reliably reproduces the issue, and
asserts that the fix works correctly.
Bert has kindly tested the fix and confirmed it resolved his issues. Also
Mikhail Gavrilov kindly reported what appears to be precisely the same
bug, which this fix should also resolve.
This patch (of 2):
There has been a subtle bug present in the maple tree implementation from
its inception.
This arises from how stores are performed - when a store occurs, it will
overwrite overlapping ranges and adjust the tree as necessary to
accommodate this.
A range may always ultimately span two leaf nodes. In this instance we
walk the two leaf nodes, determine which elements are not overwritten to
the left and to the right of the start and end of the ranges respectively
and then rebalance the tree to contain these entries and the newly
inserted one.
This kind of store is dubbed a 'spanning store' and is implemented by
mas_wr_spanning_store().
In order to reach this stage, mas_store_gfp() invokes
mas_wr_preallocate(), mas_wr_store_type() and mas_wr_walk() in turn to
walk the tree and update the object (mas) to traverse to the location
where the write should be performed, determining its store type.
When a spanning store is required, this function returns false stopping at
the parent node which contains the target range, and mas_wr_store_type()
marks the mas->store_type as wr_spanning_store to denote this fact.
When we go to perform the store in mas_wr_spanning_store(), we first
determine the elements AFTER the END of the range we wish to store (that
is, to the right of the entry to be inserted) - we do this by walking to
the NEXT pivot in the tree (i.e. r_mas.last + 1), starting at the node we
have just determined contains the range over which we intend to write.
We then turn our attention to the entries to the left of the entry we are
inserting, whose state is represented by l_mas, and copy these into a 'big
node', which is a special node which contains enough slots to contain two
leaf node's worth of data.
We then copy the entry we wish to store immediately after this - the copy
and the insertion of the new entry is performed by mas_store_b_node().
After this we copy the elements to the right of the end of the range which
we are inserting, if we have not exceeded the length of the node (i.e.
r_mas.offset <= r_mas.end).
Herein lies the bug - under very specific circumstances, this logic can
break and corrupt the maple tree.
Consider the following tree:
Height
0 Root Node
/ \
pivot = 0xffff / \ pivot = ULONG_MAX
/ \
1 A [-----] ...
/ \
pivot = 0x4fff / \ pivot = 0xffff
/ \
2 (LEAVES) B [-----] [-----] C
^--- Last pivot 0xffff.
Now imagine we wish to store an entry in the range [0x4000, 0xffff] (note
that all ranges expressed in maple tree code are inclusive):
1. mas_store_gfp() descends the tree, finds node A at <=0xffff, then
determines that this is a spanning store across nodes B and C. The mas
state is set such that the current node from which we traverse further
is node A.
2. In mas_wr_spanning_store() we try to find elements to the right of pivot
0xffff by searching for an index of 0x10000:
- mas_wr_walk_index() invokes mas_wr_walk_descend() and
mas_wr_node_walk() in turn.
- mas_wr_node_walk() loops over entries in node A until EITHER it
finds an entry whose pivot equals or exceeds 0x10000 OR it
reaches the final entry.
- Since no entry has a pivot equal to or exceeding 0x10000, pivot
0xffff is selected, leading to node C.
- mas_wr_walk_traverse() resets the mas state to traverse node C. We
loop around and invoke mas_wr_walk_descend() and mas_wr_node_walk()
in turn once again.
- Again, we reach the last entry in node C, which has a pivot of
0xffff.
3. We then copy the elements to the left of 0x4000 in node B to the big
node via mas_store_b_node(), and insert the new [0x4000, 0xffff] entry
too.
4. We determine whether we have any entries to copy from the right of the
end of the range via - and with r_mas set up at the entry at pivot
0xffff, r_mas.offset <= r_mas.end, and then we DUPLICATE the entry at
pivot 0xffff.
5. BUG! The maple tree is corrupted with a duplicate entry.
This requires a very specific set of circumstances - we must be spanning
the last element in a leaf node, which is the last element in the parent
node.
spanning store across two leaf nodes with a range that ends at that shared
pivot.
A potential solution to this problem would simply be to reset the walk
each time we traverse r_mas, however given the rarity of this situation it
seems that would be rather inefficient.
Instead, this patch detects if the right hand node is populated, i.e. has
anything we need to copy.
We do so by only copying elements from the right of the entry being
inserted when the maximum value present exceeds the last, rather than
basing this on offset position.
The patch also updates some comments and eliminates the unused bool return
value in mas_wr_walk_index().
The work performed in commit f8d112a4e657 ("mm/mmap: avoid zeroing vma
tree in mmap_region()") seems to have made the probability of this event
much more likely, which is the point at which reports started to be
submitted concerning this bug.
The motivation for this change arose from Bert Karwatzki's report of
encountering mm instability after the release of kernel v6.12-rc1 which,
after the use of CONFIG_DEBUG_VM_MAPLE_TREE and similar configuration
options, was identified as maple tree corruption.
After Bert very generously provided his time and ability to reproduce this
event consistently, I was able to finally identify that the issue
discussed in this commit message was occurring for him.
Link: https://lkml.kernel.org/r/cover.1728314402.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/48b349a2a0f7c76e18772712d0997a5e12ab0a3b.1728314403.git.lorenzo.stoakes@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/all/20241001023402.3374-1-spasswolf@web.de/
Tested-by: Bert Karwatzki <spasswolf@web.de>
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Closes: https://lore.kernel.org/all/CABXGCsOPwuoNOqSMmAvWO2Fz4TEmPnjFj-b7iF+XFRu1h7-+Dg@mail.gmail.com/
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
According to the prototype formal BPF memory consistency model
discussed e.g. in [1] and following the ordering properties of
the C/in-kernel macro atomic_cmpxchg(), a BPF atomic operation
with the BPF_CMPXCHG modifier is fully ordered. However, the
current RISC-V JIT lowerings fail to meet such memory ordering
property. This is illustrated by the following litmus test:
BPF BPF__MP+success_cmpxchg+fence
{
0:r1=x; 0:r3=y; 0:r5=1;
1:r2=y; 1:r4=f; 1:r7=x;
}
P0 | P1 ;
*(u64 *)(r1 + 0) = 1 | r1 = *(u64 *)(r2 + 0) ;
r2 = cmpxchg_64 (r3 + 0, r4, r5) | r3 = atomic_fetch_add((u64 *)(r4 + 0), r5) ;
| r6 = *(u64 *)(r7 + 0) ;
exists (1:r1=1 /\ 1:r6=0)
whose "exists" clause is not satisfiable according to the BPF
memory model. Using the current RISC-V JIT lowerings, the test
can be mapped to the following RISC-V litmus test:
RISCV RISCV__MP+success_cmpxchg+fence
{
0:x1=x; 0:x3=y; 0:x5=1;
1:x2=y; 1:x4=f; 1:x7=x;
}
P0 | P1 ;
sd x5, 0(x1) | ld x1, 0(x2) ;
L00: | amoadd.d.aqrl x3, x5, 0(x4) ;
lr.d x2, 0(x3) | ld x6, 0(x7) ;
bne x2, x4, L01 | ;
sc.d x6, x5, 0(x3) | ;
bne x6, x4, L00 | ;
fence rw, rw | ;
L01: | ;
exists (1:x1=1 /\ 1:x6=0)
where the two stores in P0 can be reordered. Update the RISC-V
JIT lowerings/implementation of BPF_CMPXCHG to emit an SC with
RELEASE ("rl") annotation in order to meet the expected memory
ordering guarantees. The resulting RISC-V JIT lowerings of
BPF_CMPXCHG match the RISC-V lowerings of the C atomic_cmpxchg().
Other lowerings were fixed via 20a759df3bba ("riscv, bpf: make
some atomic operations fully ordered").
Fixes: dd642ccb45ec ("riscv, bpf: Implement more atomic operations for RV64")
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lpc.events/event/18/contributions/1949/attachments/1665/3441/bpfmemmodel.2024.09.19p.pdf [1]
Link: https://lore.kernel.org/bpf/20241017143628.2673894-1-parri.andrea@gmail.com
|
|
When the sqpoll is exiting and cancels pending work items, it may need
to run task_work. If this happens from within io_uring_cancel_generic(),
then it may be under waiting for the io_uring_task waitqueue. This
results in the below splat from the scheduler, as the ring mutex may be
attempted grabbed while in a TASK_INTERRUPTIBLE state.
Ensure that the task state is set appropriately for that, just like what
is done for the other cases in io_run_task_work().
do not call blocking ops when !TASK_RUNNING; state=1 set at [<0000000029387fd2>] prepare_to_wait+0x88/0x2fc
WARNING: CPU: 6 PID: 59939 at kernel/sched/core.c:8561 __might_sleep+0xf4/0x140
Modules linked in:
CPU: 6 UID: 0 PID: 59939 Comm: iou-sqp-59938 Not tainted 6.12.0-rc3-00113-g8d020023b155 #7456
Hardware name: linux,dummy-virt (DT)
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : __might_sleep+0xf4/0x140
lr : __might_sleep+0xf4/0x140
sp : ffff80008c5e7830
x29: ffff80008c5e7830 x28: ffff0000d93088c0 x27: ffff60001c2d7230
x26: dfff800000000000 x25: ffff0000e16b9180 x24: ffff80008c5e7a50
x23: 1ffff000118bcf4a x22: ffff0000e16b9180 x21: ffff0000e16b9180
x20: 000000000000011b x19: ffff80008310fac0 x18: 1ffff000118bcd90
x17: 30303c5b20746120 x16: 74657320313d6574 x15: 0720072007200720
x14: 0720072007200720 x13: 0720072007200720 x12: ffff600036c64f0b
x11: 1fffe00036c64f0a x10: ffff600036c64f0a x9 : dfff800000000000
x8 : 00009fffc939b0f6 x7 : ffff0001b6327853 x6 : 0000000000000001
x5 : ffff0001b6327850 x4 : ffff600036c64f0b x3 : ffff8000803c35bc
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000e16b9180
Call trace:
__might_sleep+0xf4/0x140
mutex_lock+0x84/0x124
io_handle_tw_list+0xf4/0x260
tctx_task_work_run+0x94/0x340
io_run_task_work+0x1ec/0x3c0
io_uring_cancel_generic+0x364/0x524
io_sq_thread+0x820/0x124c
ret_from_fork+0x10/0x20
Cc: stable@vger.kernel.org
Fixes: af5d68f8892f ("io_uring/sqpoll: manage task_work privately")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the following Telit FN920C04 compositions:
0x10a2: MBIM + tty (AT/NMEA) + tty (AT) + tty (diag)
T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 17 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10a2 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=92c4c4d8
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10a7: MBIM + tty (AT) + tty (AT) + tty (diag)
T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 18 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10a7 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=92c4c4d8
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10aa: MBIM + tty (AT) + tty (diag) + DPL (data packet logging) + adb
T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 15 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10aa Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=92c4c4d8
C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add Quectel EM916Q-GL with product ID 0x6007
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=6007 Rev= 2.00
S: Manufacturer=Quectel
S: Product=EG916Q-GL
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=200mA
A: FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=88(I) Atr=03(Int.) MxPS= 32 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
MI_00 Quectel USB Diag Port
MI_01 Quectel USB NMEA Port
MI_02 Quectel USB AT Port
MI_03 Quectel USB Modem Port
MI_04 Quectel USB Net Port
Signed-off-by: Benjamin B. Frost <benjamin@geanix.com>
Reviewed-by: Lars Melin <larsm17@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
vsock_bpf_prot is set up at runtime. Remove the superfluous init.
No functional change intended.
Fixes: 634f1a7110b4 ("vsock: support sockmap")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241013-vsock-fixes-for-redir-v2-4-d6577bbfe742@rbox.co
|
|
Dequeuing via vsock_transport::read_skb() left msg_count outdated, which
then confused SOCK_SEQPACKET recv(). Decrease the counter.
Fixes: 634f1a7110b4 ("vsock: support sockmap")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241013-vsock-fixes-for-redir-v2-3-d6577bbfe742@rbox.co
|
|
Make sure virtio_transport_inc_rx_pkt() and virtio_transport_dec_rx_pkt()
calls are balanced (i.e. virtio_vsock_sock::rx_bytes doesn't lie) after
vsock_transport::read_skb().
While here, also inform the peer that we've freed up space and it has more
credit.
Failing to update rx_bytes after packet is dequeued leads to a warning on
SOCK_STREAM recv():
[ 233.396654] rx_queue is empty, but rx_bytes is non-zero
[ 233.396702] WARNING: CPU: 11 PID: 40601 at net/vmw_vsock/virtio_transport_common.c:589
Fixes: 634f1a7110b4 ("vsock: support sockmap")
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241013-vsock-fixes-for-redir-v2-2-d6577bbfe742@rbox.co
|
