summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-05-17powerpc/pseries/iommu: LPAR panics during boot up with a frozen PEGaurav Batra
[ Upstream commit 49a940dbdc3107fecd5e6d3063dc07128177e058 ] At the time of LPAR boot up, partition firmware provides Open Firmware property ibm,dma-window for the PE. This property is provided on the PCI bus the PE is attached to. There are execptions where the partition firmware might not provide this property for the PE at the time of LPAR boot up. One of the scenario is where the firmware has frozen the PE due to some error condition. This PE is frozen for 24 hours or unless the whole system is reinitialized. Within this time frame, if the LPAR is booted, the frozen PE will be presented to the LPAR but ibm,dma-window property could be missing. Today, under these circumstances, the LPAR oopses with NULL pointer dereference, when configuring the PCI bus the PE is attached to. BUG: Kernel NULL pointer dereference on read at 0x000000c8 Faulting instruction address: 0xc0000000001024c0 Oops: Kernel access of bad area, sig: 7 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: Supported: Yes CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.4.0-150600.9-default #1 Hardware name: IBM,9043-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_023) hv:phyp pSeries NIP: c0000000001024c0 LR: c0000000001024b0 CTR: c000000000102450 REGS: c0000000037db5c0 TRAP: 0300 Not tainted (6.4.0-150600.9-default) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28000822 XER: 00000000 CFAR: c00000000010254c DAR: 00000000000000c8 DSISR: 00080000 IRQMASK: 0 ... NIP [c0000000001024c0] pci_dma_bus_setup_pSeriesLP+0x70/0x2a0 LR [c0000000001024b0] pci_dma_bus_setup_pSeriesLP+0x60/0x2a0 Call Trace: pci_dma_bus_setup_pSeriesLP+0x60/0x2a0 (unreliable) pcibios_setup_bus_self+0x1c0/0x370 __of_scan_bus+0x2f8/0x330 pcibios_scan_phb+0x280/0x3d0 pcibios_init+0x88/0x12c do_one_initcall+0x60/0x320 kernel_init_freeable+0x344/0x3e4 kernel_init+0x34/0x1d0 ret_from_kernel_user_thread+0x14/0x1c Fixes: b1fc44eaa9ba ("pseries/iommu/ddw: Fix kdump to work in absence of ibm,dma-window") Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240422205141.10662-1-gbatra@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17powerpc/pseries: make max polling consistent for longer H_CALLsNayna Jain
[ Upstream commit 784354349d2c988590c63a5a001ca37b2a6d4da1 ] Currently, plpks_confirm_object_flushed() function polls for 5msec in total instead of 5sec. Keep max polling time consistent for all the H_CALLs, which take longer than expected, to be 5sec. Also, make use of fsleep() everywhere to insert delay. Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com> Fixes: 2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore") Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240418031230.170954-1-nayna@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate changeJernej Skrabec
[ Upstream commit 7e91ed763dc07437777bd012af7a2bd4493731ff ] While PLL CPUX clock rate change when CPU is running from it works in vast majority of cases, now and then it causes instability. This leads to system crashes and other undefined behaviour. After a lot of testing (30+ hours) while also doing a lot of frequency switches, we can't observe any instability issues anymore when doing reparenting to stable clock like 24 MHz oscillator. Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Reported-by: Chad Wagner <wagnerch42@gmail.com> Link: https://forum.libreelec.tv/thread/27295-orange-pi-3-lts-freezes/ Tested-by: Chad Wagner <wagnerch42@gmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20231013181712.2128037-1-jernej.skrabec@gmail.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17clk: qcom: smd-rpm: Restore msm8976 num_clkAdam Skladowski
[ Upstream commit 0d4ce2458cd7d1d66a5ee2f3c036592fb663d5bc ] During rework somehow msm8976 num_clk got removed, restore it. Fixes: d6edc31f3a68 ("clk: qcom: smd-rpm: Separate out interconnect bus clocks") Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240401171641.8979-1-a39.skl@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17drm/xe/display: Fix ADL-N detectionLucas De Marchi
[ Upstream commit df04b152fca2d46e75fbb74ed79299bc420bc9e6 ] Contrary to i915, in xe ADL-N is kept as a different platform, not a subplatform of ADL-P. Since the display side doesn't need to differentiate between P and N, i.e. IS_ALDERLAKE_P_N() is never called, just fixup the compat header to check for both P and N. Moving ADL-N to be a subplatform would be more complex as the firmware loading in xe only handles platforms, not subplatforms, as going forward the direction is to check on IP version rather than platforms/subplatforms. Fix warning when initializing display: xe 0000:00:02.0: [drm:intel_pch_type [xe]] Found Alder Lake PCH ------------[ cut here ]------------ xe 0000:00:02.0: drm_WARN_ON(!((dev_priv)->info.platform == XE_ALDERLAKE_S) && !((dev_priv)->info.platform == XE_ALDERLAKE_P)) And wrong paths being taken on the display side. Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240425181610.2704633-1-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 6a2a90cba12b42eb96c2af3426b77ceb4be31df2) Fixes: 44e694958b95 ("drm/xe/display: Implement display support") Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17net: gro: add flush check in udp_gro_receive_segmentRichard Gobert
[ Upstream commit 5babae777c61aa8a8679d59d3cdc54165ad96d42 ] GRO-GSO path is supposed to be transparent and as such L3 flush checks are relevant to all UDP flows merging in GRO. This patch uses the same logic and code from tcp_gro_receive, terminating merge if flush is non zero. Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.") Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17net: gro: fix udp bad offset in socket lookup by adding ↵Richard Gobert
{inner_}network_offset to napi_gro_cb [ Upstream commit 5ef31ea5d053a8f493a772ebad3f3ce82c35d845 ] Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp: additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the complete phase of gro. The functions always return skb->network_header, which in the case of encapsulated packets at the gro complete phase, is always set to the innermost L3 of the packet. That means that calling {ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_ L3/L4 may return an unexpected value. This incorrect usage leads to a bug in GRO's UDP socket lookup. udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These *_hdr functions return network_header which will point to the innermost L3, resulting in the wrong offset being used in __udp{4,6}_lib_lookup with encapsulated packets. This patch adds network_offset and inner_network_offset to napi_gro_cb, and makes sure both are set correctly. To fix the issue, network_offsets union is used inside napi_gro_cb, in which both the outer and the inner network offsets are saved. Reproduction example: Endpoint configuration example (fou + local address bind) # ip fou add port 6666 ipproto 4 # ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip # ip link set tun1 up # ip a add 1.1.1.2/24 dev tun1 Netperf TCP_STREAM result on net-next before patch is applied: net-next main, GRO enabled: $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 5.28 2.37 net-next main, GRO disabled: $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 5.01 2745.06 patch applied, GRO enabled: $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 5.01 2877.38 Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket") Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17ipv4: Fix uninit-value access in __ip_make_skb()Shigeru Yoshida
[ Upstream commit fc1092f51567277509563800a3c56732070b6aa4 ] KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb() tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL while __ip_make_skb() is running, the function will access icmphdr in the skb even if it is not included. This causes the issue reported by KMSAN. Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL on the socket. Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These are union in struct flowi4 and are implicitly initialized by flowi4_init_output(), but we should not rely on specific union layout. Initialize these explicitly in raw_sendmsg(). [1] BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 ip_finish_skb include/net/ip.h:243 [inline] ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508 raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] __ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128 ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365 raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb79b1 #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 Fixes: 99e5acae193e ("ipv4: Fix potential uninit variable access bug in __ip_make_skb()") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Link: https://lore.kernel.org/r/20240430123945.2057348-1-syoshida@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17drm/panel: ili9341: Use predefined error codesAndy Shevchenko
[ Upstream commit da85f0aaa9f21999753b01d45c0343f885a8f905 ] In one case the -1 is returned which is quite confusing code for the wrong device ID, in another the ret is returning instead of plain 0 that also confusing as readed may ask the possible meaning of positive codes, which are never the case there. Convert both to use explicit predefined error codes to make it clear what's going on there. Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev> Link: https://lore.kernel.org/r/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17drm/panel: ili9341: Respect deferred probeAndy Shevchenko
[ Upstream commit 740fc1e0509be3f7e2207e89125b06119ed62943 ] GPIO controller might not be available when driver is being probed. There are plenty of reasons why, one of which is deferred probe. Since GPIOs are optional, return any error code we got to the upper layer, including deferred probe. With that in mind, use dev_err_probe() in order to avoid spamming the logs. Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev> Link: https://lore.kernel.org/r/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17drm/panel: ili9341: Correct use of device property APIsAndy Shevchenko
[ Upstream commit d43cd48ef1791801c61a54fade4a88d294dedf77 ] It seems driver missed the point of proper use of device property APIs. Correct this by updating headers and calls respectively. Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240425142706.2440113-2-andriy.shevchenko@linux.intel.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-2-andriy.shevchenko@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17s390/qeth: Fix kernel panic after setting hsuidAlexandra Winter
[ Upstream commit 8a2e4d37afb8500b276e5ee903dee06f50ab0494 ] Symptom: When the hsuid attribute is set for the first time on an IQD Layer3 device while the corresponding network interface is already UP, the kernel will try to execute a napi function pointer that is NULL. Example: --------------------------------------------------------------------------- [ 2057.572696] illegal operation: 0001 ilc:1 [#1] SMP [ 2057.572702] Modules linked in: af_iucv qeth_l3 zfcp scsi_transport_fc sunrpc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_tables_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink ghash_s390 prng xts aes_s390 des_s390 de s_generic sha3_512_s390 sha3_256_s390 sha512_s390 vfio_ccw vfio_mdev mdev vfio_iommu_type1 eadm_sch vfio ext4 mbcache jbd2 qeth_l2 bridge stp llc dasd_eckd_mod qeth dasd_mod qdio ccwgroup pkey zcrypt [ 2057.572739] CPU: 6 PID: 60182 Comm: stress_client Kdump: loaded Not tainted 4.18.0-541.el8.s390x #1 [ 2057.572742] Hardware name: IBM 3931 A01 704 (LPAR) [ 2057.572744] Krnl PSW : 0704f00180000000 0000000000000002 (0x2) [ 2057.572748] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3 [ 2057.572751] Krnl GPRS: 0000000000000004 0000000000000000 00000000a3b008d8 0000000000000000 [ 2057.572754] 00000000a3b008d8 cb923a29c779abc5 0000000000000000 00000000814cfd80 [ 2057.572756] 000000000000012c 0000000000000000 00000000a3b008d8 00000000a3b008d8 [ 2057.572758] 00000000bab6d500 00000000814cfd80 0000000091317e46 00000000814cfc68 [ 2057.572762] Krnl Code:#0000000000000000: 0000 illegal >0000000000000002: 0000 illegal 0000000000000004: 0000 illegal 0000000000000006: 0000 illegal 0000000000000008: 0000 illegal 000000000000000a: 0000 illegal 000000000000000c: 0000 illegal 000000000000000e: 0000 illegal [ 2057.572800] Call Trace: [ 2057.572801] ([<00000000ec639700>] 0xec639700) [ 2057.572803] [<00000000913183e2>] net_rx_action+0x2ba/0x398 [ 2057.572809] [<0000000091515f76>] __do_softirq+0x11e/0x3a0 [ 2057.572813] [<0000000090ce160c>] do_softirq_own_stack+0x3c/0x58 [ 2057.572817] ([<0000000090d2cbd6>] do_softirq.part.1+0x56/0x60) [ 2057.572822] [<0000000090d2cc60>] __local_bh_enable_ip+0x80/0x98 [ 2057.572825] [<0000000091314706>] __dev_queue_xmit+0x2be/0xd70 [ 2057.572827] [<000003ff803dd6d6>] afiucv_hs_send+0x24e/0x300 [af_iucv] [ 2057.572830] [<000003ff803dd88a>] iucv_send_ctrl+0x102/0x138 [af_iucv] [ 2057.572833] [<000003ff803de72a>] iucv_sock_connect+0x37a/0x468 [af_iucv] [ 2057.572835] [<00000000912e7e90>] __sys_connect+0xa0/0xd8 [ 2057.572839] [<00000000912e9580>] sys_socketcall+0x228/0x348 [ 2057.572841] [<0000000091514e1a>] system_call+0x2a6/0x2c8 [ 2057.572843] Last Breaking-Event-Address: [ 2057.572844] [<0000000091317e44>] __napi_poll+0x4c/0x1d8 [ 2057.572846] [ 2057.572847] Kernel panic - not syncing: Fatal exception in interrupt ------------------------------------------------------------------------------------------- Analysis: There is one napi structure per out_q: card->qdio.out_qs[i].napi The napi.poll functions are set during qeth_open(). Since commit 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)") qeth_set_offline()/qeth_set_online() no longer call dev_close()/ dev_open(). So if qeth_free_qdio_queues() cleared card->qdio.out_qs[i].napi.poll while the network interface was UP and the card was offline, they are not set again. Reproduction: chzdev -e $devno layer2=0 ip link set dev $network_interface up echo 0 > /sys/bus/ccwgroup/devices/0.0.$devno/online echo foo > /sys/bus/ccwgroup/devices/0.0.$devno/hsuid echo 1 > /sys/bus/ccwgroup/devices/0.0.$devno/online -> Crash (can be enforced e.g. by af_iucv connect(), ip link down/up, ...) Note that a Completion Queue (CQ) is only enabled or disabled, when hsuid is set for the first time or when it is removed. Workarounds: - Set hsuid before setting the device online for the first time or - Use chzdev -d $devno; chzdev $devno hsuid=xxx; chzdev -e $devno; to set hsuid on an existing device. (this will remove and recreate the network interface) Fix: There is no need to free the output queues when a completion queue is added or removed. card->qdio.state now indicates whether the inbound buffer pool and the outbound queues are allocated. card->qdio.c_q indicates whether a CQ is allocated. Fixes: 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240430091004.2265683-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17vxlan: Pull inner IP header in vxlan_rcv().Guillaume Nault
[ Upstream commit f7789419137b18e3847d0cc41afd788c3c00663d ] Ensure the inner IP header is part of skb's linear data before reading its ECN bits. Otherwise we might read garbage. One symptom is the system erroneously logging errors like "vxlan: non-ECT from xxx.xxx.xxx.xxx with TOS=xxxx". Similar bugs have been fixed in geneve, ip_tunnel and ip6_tunnel (see commit 1ca1ba465e55 ("geneve: make sure to pull inner header in geneve_rx()") for example). So let's reuse the same code structure for consistency. Maybe we'll can add a common helper in the future. Fixes: d342894c5d2f ("vxlan: virtual extensible lan") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/1239c8db54efec341dd6455c77e0380f58923a3c.1714495737.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17tipc: fix a possible memleak in tipc_buf_appendXin Long
[ Upstream commit 97bf6f81b29a8efaf5d0983251a7450e5794370d ] __skb_linearize() doesn't free the skb when it fails, so move '*buf = NULL' after __skb_linearize(), so that the skb can be freed on the err path. Fixes: b7df21cf1b79 ("tipc: skb_linearize the head skb when reassembling msgs") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Link: https://lore.kernel.org/r/90710748c29a1521efac4f75ea01b3b7e61414cf.1714485818.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17rxrpc: Clients must accept conn from any addressJeffrey Altman
[ Upstream commit 8953285d7bd63c12b007432a9b4587fa2fad49fb ] The find connection logic of Transarc's Rx was modified in the mid-1990s to support multi-homed servers which might send a response packet from an address other than the destination address in the received packet. The rules for accepting a packet by an Rx initiator (RX_CLIENT_CONNECTION) were altered to permit acceptance of a packet from any address provided that the port number was unchanged and all of the connection identifiers matched (Epoch, CID, SecurityClass, ...). This change applies the same rules to the Linux implementation which makes it consistent with IBM AFS 3.6, Arla, OpenAFS and AuriStorFS. Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: Jeffrey Altman <jaltman@auristor.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Link: https://lore.kernel.org/r/20240419163057.4141728-1-marc.dionne@auristor.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17net: core: reject skb_copy(_expand) for fraglist GSO skbsFelix Fietkau
[ Upstream commit d091e579b864fa790dd6a0cd537a22c383126681 ] SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become invalid. Return NULL if such an skb is passed to skb_copy or skb_copy_expand, in order to prevent a crash on a potential later call to skb_gso_segment. Fixes: 3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17net: bridge: fix multicast-to-unicast with fraglist GSOFelix Fietkau
[ Upstream commit 59c878cbcdd80ed39315573b3511d0acfd3501b5 ] Calling skb_copy on a SKB_GSO_FRAGLIST skb is not valid, since it returns an invalid linearized skb. This code only needs to change the ethernet header, so pskb_copy is the right function to call here. Fixes: 6db6f0eae605 ("bridge: multicast to unicast") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17spi: fix null pointer dereference within spi_syncMans Rullgard
[ Upstream commit 4756fa529b2f12b7cb8f21fe229b0f6f47190829 ] If spi_sync() is called with the non-empty queue and the same spi_message is then reused, the complete callback for the message remains set while the context is cleared, leading to a null pointer dereference when the callback is invoked from spi_finalize_current_message(). With function inlining disabled, the call stack might look like this: _raw_spin_lock_irqsave from complete_with_flags+0x18/0x58 complete_with_flags from spi_complete+0x8/0xc spi_complete from spi_finalize_current_message+0xec/0x184 spi_finalize_current_message from spi_transfer_one_message+0x2a8/0x474 spi_transfer_one_message from __spi_pump_transfer_message+0x104/0x230 __spi_pump_transfer_message from __spi_transfer_message_noqueue+0x30/0xc4 __spi_transfer_message_noqueue from __spi_sync+0x204/0x248 __spi_sync from spi_sync+0x24/0x3c spi_sync from mcp251xfd_regmap_crc_read+0x124/0x28c [mcp251xfd] mcp251xfd_regmap_crc_read [mcp251xfd] from _regmap_raw_read+0xf8/0x154 _regmap_raw_read from _regmap_bus_read+0x44/0x70 _regmap_bus_read from _regmap_read+0x60/0xd8 _regmap_read from regmap_read+0x3c/0x5c regmap_read from mcp251xfd_alloc_can_err_skb+0x1c/0x54 [mcp251xfd] mcp251xfd_alloc_can_err_skb [mcp251xfd] from mcp251xfd_irq+0x194/0xe70 [mcp251xfd] mcp251xfd_irq [mcp251xfd] from irq_thread_fn+0x1c/0x78 irq_thread_fn from irq_thread+0x118/0x1f4 irq_thread from kthread+0xd8/0xf4 kthread from ret_from_fork+0x14/0x28 Fix this by also setting message->complete to NULL when the transfer is complete. Fixes: ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync") Signed-off-by: Mans Rullgard <mans@mansr.com> Link: https://lore.kernel.org/r/20240430182705.13019-1-mans@mansr.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17drm/amdgpu: fix doorbell regressionShashank Sharma
[ Upstream commit 705d0480e6ae5a73ca3a9c04316d0678e19a46ed ] This patch adds a missed handling of PL domain doorbell while handling VRAM faults. Cc: Christian Koenig <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Fixes: a6ff969fe9cb ("drm/amdgpu: fix visible VRAM handling during faults") Reviewed-by: Christian Koenig <christian.koenig@amd.com> Signed-off-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Arvind Yadav <arvind.yadav@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341Marek Behún
[ Upstream commit b9a61c20179fda7bdfe2c1210aa72451991ab81a ] The Topaz family (88E6141 and 88E6341) only support 256 Forwarding Information Tables. Fixes: a75961d0ebfd ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6341") Fixes: 1558727a1c1b ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6141") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240429133832.9547-1-kabel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17cxgb4: Properly lock TX queue for the selftest.Sebastian Andrzej Siewior
[ Upstream commit 9067eccdd7849dd120d5495dbd5a686fa6ed2c1a ] The selftest for the driver sends a dummy packet and checks if the packet will be received properly as it should be. The regular TX path and the selftest can use the same network queue so locking is required and was missing in the selftest path. This was addressed in the commit cited below. Unfortunately locking the TX queue requires BH to be disabled which is not the case in selftest path which is invoked in process context. Lockdep should be complaining about this. Use __netif_tx_lock_bh() for TX queue locking. Fixes: c650e04898072 ("cxgb4: Fix race between loopback and normal Tx path") Reported-by: "John B. Wyatt IV" <jwyatt@redhat.com> Closes: https://lore.kernel.org/all/Zic0ot5aGgR-V4Ks@thinkpad2021/ Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20240429091147.YWAaal4v@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17s390/cio: Ensure the copied buf is NUL terminatedBui Quang Minh
[ Upstream commit da7c622cddd4fe36be69ca61e8c42e43cde94784 ] Currently, we allocate a lbuf-sized kernel buffer and copy lbuf from userspace to that buffer. Later, we use scanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using scanf. Fix this issue by using memdup_user_nul instead. Fixes: a4f17cc72671 ("s390/cio: add CRW inject functionality") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-5-f1f1b53a10f4@gmail.com Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17ALSA: hda: intel-sdw-acpi: fix usage of device_get_named_child_node()Pierre-Louis Bossart
[ Upstream commit c158cf914713efc3bcdc25680c7156c48c12ef6a ] The documentation for device_get_named_child_node() mentions this important point: " The caller is responsible for calling fwnode_handle_put() on the returned fwnode pointer. " Add fwnode_handle_put() to avoid a leaked reference. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Fixes: 08c2a4bc9f2a ("ALSA: hda: move Intel SoundWire ACPI scan to dedicated module") Message-ID: <20240426152731.38420-1-pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17ASoC: meson: cards: select SND_DYNAMIC_MINORSJerome Brunet
[ Upstream commit 6db26f9ea4edd8a17d39ab3c20111e3ccd704aef ] Amlogic sound cards do create a lot of pcm interfaces, possibly more than 8. Some pcm interfaces are internal (like DPCM backends and c2c) and not exposed to userspace. Those interfaces still increase the number passed to snd_find_free_minor(), which eventually exceeds 8 causing -EBUSY error on card registration if CONFIG_SND_DYNAMIC_MINORS=n and the interface is exposed to userspace. select CONFIG_SND_DYNAMIC_MINORS for Amlogic cards to avoid the problem. Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20240426134150.3053741-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17ASoC: meson: axg-tdm-interface: manage formatters in triggerJerome Brunet
[ Upstream commit f949ed458ad15a00d41b37c745ebadaef171aaae ] So far, the formatters have been reset/enabled using the .prepare() callback. This was done in this callback because walking the formatters use a mutex. A mutex is used because formatter handling require dealing possibly slow clock operation. With the support of non-atomic, .trigger() callback may be used which also allows to properly enable and disable formatters on start but also pause/resume. This solve a random shift on TDMIN as well repeated samples on for TDMOUT. Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20240426152946.3078805-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17ASoC: meson: axg-card: make links nonatomicJerome Brunet
[ Upstream commit dcba52ace7d4c12e2c8c273eff55ea03a84c8baf ] Non atomic operations need to be performed in the trigger callback of the TDM interfaces. Those are BEs but what matters is the nonatomic flag of the FE in the DPCM context. Just set nonatomic for everything so, at least, what is done is clear. Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20240426152946.3078805-3-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17ASoC: meson: axg-fifo: use threaded irq to check periodsJerome Brunet
[ Upstream commit b11d26660dff8d7430892008616452dc8e5fb0f3 ] With the AXG audio subsystem, there is a possible random channel shift on TDM capture, when the slot number per lane is more than 2, and there is more than one lane used. The problem has been there since the introduction of the axg audio support but such scenario is pretty uncommon. This is why there is no loud complains about the problem. Solving the problem require to make the links non-atomic and use the trigger() callback to start FEs and BEs in the appropriate order. This was tried in the past and reverted because it caused the block irq to sleep while atomic. However, instead of reverting, the solution is to call snd_pcm_period_elapsed() in a non atomic context. Use the bottom half of a threaded IRQ to do so. Fixes: 6dc4fa179fb8 ("ASoC: meson: add axg fifo base driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20240426152946.3078805-2-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17ASoC: meson: axg-fifo: use FIELD helpersJerome Brunet
[ Upstream commit 9e6f39535c794adea6ba802a52c722d193c28124 ] Use FIELD_GET() and FIELD_PREP() helpers instead of doing it manually. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://msgid.link/r/20240227150826.573581-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Stable-dep-of: b11d26660dff ("ASoC: meson: axg-fifo: use threaded irq to check periods") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17vxlan: Add missing VNI filter counter update in arp_reduce().Guillaume Nault
[ Upstream commit b22ea4ef4c3438817fcb604255b55b0058ed8c64 ] VXLAN stores per-VNI statistics using vxlan_vnifilter_count(). These statistics were not updated when arp_reduce() failed its pskb_may_pull() call. Use vxlan_vnifilter_count() to update the VNI counter when that happens. Fixes: 4095e0e1328a ("drivers: vxlan: vnifilter: per vni stats") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17vxlan: Fix racy device stats updates.Guillaume Nault
[ Upstream commit 6dee402daba4eb8677a9438ebdcd8fe90ddd4326 ] VXLAN devices update their stats locklessly. Therefore these counters should either be stored in per-cpu data structures or the updates should be done using atomic increments. Since the net_device_core_stats infrastructure is already used in vxlan_rcv(), use it for the other rx_dropped and tx_dropped counter updates. Update the other counters atomically using DEV_STATS_INC(). Fixes: d342894c5d2f ("vxlan: virtual extensible lan") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17net: qede: use return from qede_parse_actions()Asbjørn Sloth Tønnesen
[ Upstream commit f26f719a36e56381a1f4230e5364e7ad4d485888 ] When calling qede_parse_actions() then the return code was only used for a non-zero check, and then -EINVAL was returned. qede_parse_actions() can currently fail with: * -EINVAL * -EOPNOTSUPP This patch changes the code to use the actual return code, not just return -EINVAL. The blaimed commit broke the implicit assumption that only -EINVAL would ever be returned. Only compile tested. Fixes: 319a1d19471e ("flow_offload: check for basic action hw stats type") Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17net: qede: use return from qede_parse_flow_attr() for flow_specAsbjørn Sloth Tønnesen
[ Upstream commit 27b44414a34b108c5a37cd5b4894f606061d86e7 ] In qede_flow_spec_to_rule(), when calling qede_parse_flow_attr() then the return code was only used for a non-zero check, and then -EINVAL was returned. qede_parse_flow_attr() can currently fail with: * -EINVAL * -EOPNOTSUPP * -EPROTONOSUPPORT This patch changes the code to use the actual return code, not just return -EINVAL. The blaimed commit introduced qede_flow_spec_to_rule(), and this call to qede_parse_flow_attr(), it looks like it just duplicated how it was already used. Only compile tested. Fixes: 37c5d3efd7f8 ("qede: use ethtool_rx_flow_rule() to remove duplicated parser code") Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17net: qede: use return from qede_parse_flow_attr() for flowerAsbjørn Sloth Tønnesen
[ Upstream commit fcee2065a178f78be6fd516302830378b17dba3d ] In qede_add_tc_flower_fltr(), when calling qede_parse_flow_attr() then the return code was only used for a non-zero check, and then -EINVAL was returned. qede_parse_flow_attr() can currently fail with: * -EINVAL * -EOPNOTSUPP * -EPROTONOSUPPORT This patch changes the code to use the actual return code, not just return -EINVAL. The blaimed commit introduced these functions. Only compile tested. Fixes: 2ce9c93eaca6 ("qede: Ingress tc flower offload (drop action) support.") Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17net: qede: sanitize 'rc' in qede_add_tc_flower_fltr()Asbjørn Sloth Tønnesen
[ Upstream commit e25714466abd9d96901b15efddf82c60a38abd86 ] Explicitly set 'rc' (return code), before jumping to the unlock and return path. By not having any code depend on that 'rc' remains at it's initial value of -EINVAL, then we can re-use 'rc' for the return code of function calls in subsequent patches. Only compile tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: fcee2065a178 ("net: qede: use return from qede_parse_flow_attr() for flower") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17ALSA: emu10k1: fix E-MU dock initializationOswald Buddenhagen
[ Upstream commit e8289fd3fa65d60cf04dab6f7845eda352c04ea6 ] A side effect of making the dock monitoring interrupt-driven was that we'd be very quick to program a freshly connected dock. However, for unclear reasons, the dock does not work when we do that - despite the FPGA netlist upload going just fine. We work around this by adding a delay before programming the dock; for safety, the value is several times as much as was determined empirically. Note that a badly timed dock hot-plug would have triggered the problem even before the referenced commit - but now it would happen 100% instead of about 3% of the time, thus making it impossible to work around by re-plugging. Fixes: fbb64eedf5a3 ("ALSA: emu10k1: make E-MU dock monitoring interrupt-driven") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218584 Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <20240428093716.3198666-6-oswald.buddenhagen@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17ALSA: emu10k1: move the whole GPIO event handling to the workqueueOswald Buddenhagen
[ Upstream commit f848337cd801c7106a4ec0d61765771dab2a5909 ] The actual event processing was already done by workqueue items. We can move the event dispatching there as well, rather than doing it already in the interrupt handler callback. This change has a rather profound "side effect" on the reliability of the FPGA programming: once we enter programming mode, we must not issue any snd_emu1010_fpga_{read,write}() calls until we're done, as these would badly mess up the programming protocol. But exactly that would happen when trying to program the dock, as that triggers GPIO interrupts as a side effect. This is mitigated by deferring the actual interrupt handling, as workqueue items are not re-entrant. To avoid scheduling the dispatcher on non-events, we now explicitly ignore GPIO IRQs triggered by "uninteresting" pins, which happens a lot as a side effect of calling snd_emu1010_fpga_{read,write}(). Fixes: fbb64eedf5a3 ("ALSA: emu10k1: make E-MU dock monitoring interrupt-driven") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218584 Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <20240428093716.3198666-4-oswald.buddenhagen@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17ALSA: emu10k1: factor out snd_emu1010_load_dock_firmware()Oswald Buddenhagen
[ Upstream commit 28deafd0fbdc45cc9c63bd7dd4efc35137958862 ] Pulled out of the next patch to improve its legibility. As the function is now available, call it directly from snd_emu10k1_emu1010_init(), thus making the MicroDock firmware loading synchronous - there isn't really a reason not to. Note that this does not affect the AudioDocks of rev1 cards, as these have no independent power supplies, and thus come up only a while after the main card is initialized. As a drive-by, adjust the priorities of two messages to better reflect their impact. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <20240428093716.3198666-3-oswald.buddenhagen@gmx.de> Stable-dep-of: f848337cd801 ("ALSA: emu10k1: move the whole GPIO event handling to the workqueue") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17ALSA: emu10k1: fix E-MU card dock presence monitoringOswald Buddenhagen
[ Upstream commit 398321d7531963b95841865eb371fe65c44c6921 ] While there are two separate IRQ status bits for dock attach and detach, the hardware appears to mix them up more or less randomly, making them useless for tracking what actually happened. It is much safer to check the dock status separately and proceed based on that, as the old polling code did. Note that the code assumes that only the dock can be hot-plugged - if other option card bits changed, the logic would break. Fixes: fbb64eedf5a3 ("ALSA: emu10k1: make E-MU dock monitoring interrupt-driven") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218584 Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <20240428093716.3198666-2-oswald.buddenhagen@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17Fix a potential infinite loop in extract_user_to_sg()David Howells
[ Upstream commit 6a30653b604aaad1bf0f2e74b068ceb8b6fc7aea ] Fix extract_user_to_sg() so that it will break out of the loop if iov_iter_extract_pages() returns 0 rather than looping around forever. [Note that I've included two fixes lines as the function got moved to a different file and renamed] Fixes: 85dd2c8ff368 ("netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator") Fixes: f5f82cd18732 ("Move netfs_extract_iter_to_sg() to lib/scatterlist.c") Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: Steve French <sfrench@samba.org> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: netfs@lists.linux.dev Link: https://lore.kernel.org/r/1967121.1714034372@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17s390/vdso: Add CFI for RA register to asm macro vdso_funcJens Remus
[ Upstream commit b961ec10b9f9719987470236feb50c967db5a652 ] The return-address (RA) register r14 is specified as volatile in the s390x ELF ABI [1]. Nevertheless proper CFI directives must be provided for an unwinder to restore the return address, if the RA register value is changed from its value at function entry, as it is the case. [1]: s390x ELF ABI, https://github.com/IBM/s390x-abi/releases Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO") Signed-off-by: Jens Remus <jremus@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17thermal/debugfs: Prevent use-after-free from occurring after cdev removalRafael J. Wysocki
[ Upstream commit d351eb0ab04c3e8109895fc33250cebbce9c11da ] Since thermal_debug_cdev_remove() does not run under cdev->lock, it can run in parallel with thermal_debug_cdev_state_update() and it may free the struct thermal_debugfs object used by the latter after it has been checked against NULL. If that happens, thermal_debug_cdev_state_update() will access memory that has been freed already causing the kernel to crash. Address this by using cdev->lock in thermal_debug_cdev_remove() around the cdev->debugfs value check (in case the same cdev is removed at the same time in two different threads) and its reset to NULL. Fixes: 755113d76786 ("thermal/debugfs: Add thermal cooling device debugfs information") Cc :6.8+ <stable@vger.kernel.org> # 6.8+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17net l2tp: drop flow hash on forwardDavid Bauer
[ Upstream commit 42f853b42899d9b445763b55c3c8adc72be0f0e1 ] Drop the flow-hash of the skb when forwarding to the L2TP netdev. This avoids the L2TP qdisc from using the flow-hash from the outer packet, which is identical for every flow within the tunnel. This does not affect every platform but is specific for the ethernet driver. It depends on the platform including L4 information in the flow-hash. One such example is the Mediatek Filogic MT798x family of networking processors. Fixes: d9e31d17ceba ("l2tp: Add L2TP ethernet pseudowire support") Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David Bauer <mail@david-bauer.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240424171110.13701-1-mail@david-bauer.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17nsh: Restore skb->{protocol,data,mac_header} for outer header in ↵Kuniyuki Iwashima
nsh_gso_segment(). [ Upstream commit 4b911a9690d72641879ea6d13cce1de31d346d79 ] syzbot triggered various splats (see [0] and links) by a crafted GSO packet of VIRTIO_NET_HDR_GSO_UDP layering the following protocols: ETH_P_8021AD + ETH_P_NSH + ETH_P_IPV6 + IPPROTO_UDP NSH can encapsulate IPv4, IPv6, Ethernet, NSH, and MPLS. As the inner protocol can be Ethernet, NSH GSO handler, nsh_gso_segment(), calls skb_mac_gso_segment() to invoke inner protocol GSO handlers. nsh_gso_segment() does the following for the original skb before calling skb_mac_gso_segment() 1. reset skb->network_header 2. save the original skb->{mac_heaeder,mac_len} in a local variable 3. pull the NSH header 4. resets skb->mac_header 5. set up skb->mac_len and skb->protocol for the inner protocol. and does the following for the segmented skb 6. set ntohs(ETH_P_NSH) to skb->protocol 7. push the NSH header 8. restore skb->mac_header 9. set skb->mac_header + mac_len to skb->network_header 10. restore skb->mac_len There are two problems in 6-7 and 8-9. (a) After 6 & 7, skb->data points to the NSH header, so the outer header (ETH_P_8021AD in this case) is stripped when skb is sent out of netdev. Also, if NSH is encapsulated by NSH + Ethernet (so NSH-Ethernet-NSH), skb_pull() in the first nsh_gso_segment() will make skb->data point to the middle of the outer NSH or Ethernet header because the Ethernet header is not pulled by the second nsh_gso_segment(). (b) While restoring skb->{mac_header,network_header} in 8 & 9, nsh_gso_segment() does not assume that the data in the linear buffer is shifted. However, udp6_ufo_fragment() could shift the data and change skb->mac_header accordingly as demonstrated by syzbot. If this happens, even the restored skb->mac_header points to the middle of the outer header. It seems nsh_gso_segment() has never worked with outer headers so far. At the end of nsh_gso_segment(), the outer header must be restored for the segmented skb, instead of the NSH header. To do that, let's calculate the outer header position relatively from the inner header and set skb->{data,mac_header,protocol} properly. [0]: BUG: KMSAN: uninit-value in ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline] BUG: KMSAN: uninit-value in ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] BUG: KMSAN: uninit-value in ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668 ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668 ipvlan_start_xmit+0x5c/0x1a0 drivers/net/ipvlan/ipvlan_main.c:222 __netdev_start_xmit include/linux/netdevice.h:4989 [inline] netdev_start_xmit include/linux/netdevice.h:5003 [inline] xmit_one net/core/dev.c:3547 [inline] dev_hard_start_xmit+0x244/0xa10 net/core/dev.c:3563 __dev_queue_xmit+0x33ed/0x51c0 net/core/dev.c:4351 dev_queue_xmit include/linux/netdevice.h:3171 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook mm/slub.c:3819 [inline] slab_alloc_node mm/slub.c:3860 [inline] __do_kmalloc_node mm/slub.c:3980 [inline] __kmalloc_node_track_caller+0x705/0x1000 mm/slub.c:4001 kmalloc_reserve+0x249/0x4a0 net/core/skbuff.c:582 __alloc_skb+0x352/0x790 net/core/skbuff.c:651 skb_segment+0x20aa/0x7080 net/core/skbuff.c:4647 udp6_ufo_fragment+0xcab/0x1150 net/ipv6/udp_offload.c:109 ipv6_gso_segment+0x14be/0x2ca0 net/ipv6/ip6_offload.c:152 skb_mac_gso_segment+0x3e8/0x760 net/core/gso.c:53 nsh_gso_segment+0x6f4/0xf70 net/nsh/nsh.c:108 skb_mac_gso_segment+0x3e8/0x760 net/core/gso.c:53 __skb_gso_segment+0x4b0/0x730 net/core/gso.c:124 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x107f/0x1930 net/core/dev.c:3628 __dev_queue_xmit+0x1f28/0x51c0 net/core/dev.c:4343 dev_queue_xmit include/linux/netdevice.h:3171 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 1 PID: 5101 Comm: syz-executor421 Not tainted 6.8.0-rc5-syzkaller-00297-gf2e367d6ad3b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Fixes: c411ed854584 ("nsh: add GSO support") Reported-and-tested-by: syzbot+42a0dc856239de4de60e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=42a0dc856239de4de60e Reported-and-tested-by: syzbot+c298c9f0e46a3c86332b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c298c9f0e46a3c86332b Link: https://lore.kernel.org/netdev/20240415222041.18537-1-kuniyu@amazon.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240424023549.21862-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17thermal/debugfs: Fix two locking issues with thermal zone debugRafael J. Wysocki
[ Upstream commit c7f7c37271787a7f77d7eedc132b0b419a76b4c8 ] With the current thermal zone locking arrangement in the debugfs code, user space can open the "mitigations" file for a thermal zone before the zone's debugfs pointer is set which will result in a NULL pointer dereference in tze_seq_start(). Moreover, thermal_debug_tz_remove() is not called under the thermal zone lock, so it can run in parallel with the other functions accessing the thermal zone's struct thermal_debugfs object. Then, it may clear tz->debugfs after one of those functions has checked it and the struct thermal_debugfs object may be freed prematurely. To address the first problem, pass a pointer to the thermal zone's struct thermal_debugfs object to debugfs_create_file() in thermal_debug_tz_add() and make tze_seq_start(), tze_seq_next(), tze_seq_stop(), and tze_seq_show() retrieve it from s->private instead of a pointer to the thermal zone object. This will ensure that tz_debugfs will be valid across the "mitigations" file accesses until thermal_debugfs_remove_id() called by thermal_debug_tz_remove() removes that file. To address the second problem, use tz->lock in thermal_debug_tz_remove() around the tz->debugfs value check (in case the same thermal zone is removed at the same time in two different threads) and its reset to NULL. Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes") Cc :6.8+ <stable@vger.kernel.org> # 6.8+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17thermal/debugfs: Free all thermal zone debug memory on zone removalRafael J. Wysocki
[ Upstream commit 72c1afffa4c645fe0e0f1c03e5f34395ed65b5f4 ] Because thermal_debug_tz_remove() does not free all memory allocated for thermal zone diagnostics, some of that memory becomes unreachable after freeing the thermal zone's struct thermal_debugfs object. Address this by making thermal_debug_tz_remove() free all of the memory in question. Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes") Cc :6.8+ <stable@vger.kernel.org> # 6.8+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17octeontx2-af: avoid off-by-one read from userspaceBui Quang Minh
[ Upstream commit f299ee709fb45036454ca11e90cb2810fe771878 ] We try to access count + 1 byte from userspace with memdup_user(buffer, count + 1). However, the userspace only provides buffer of count bytes and only these count bytes are verified to be okay to access. To ensure the copied buffer is NUL terminated, we use memdup_user_nul instead. Fixes: 3a2eb515d136 ("octeontx2-af: Fix an off by one in rvu_dbg_qsize_write()") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-6-f1f1b53a10f4@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17bna: ensure the copied buf is NUL terminatedBui Quang Minh
[ Upstream commit 8c34096c7fdf272fd4c0c37fe411cd2e3ed0ee9f ] Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from userspace to that buffer. Later, we use sscanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user. Fixes: 7afc5dbde091 ("bna: Add debugfs interface.") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-2-f1f1b53a10f4@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17ice: ensure the copied buf is NUL terminatedBui Quang Minh
[ Upstream commit 666854ea9cad844f75a068f32812a2d78004914a ] Currently, we allocate a count-sized kernel buffer and copy count bytes from userspace to that buffer. Later, we use sscanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user. Fixes: 96a9a9341cda ("ice: configure FW logging") Fixes: 73671c3162c8 ("ice: enable FW logging") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-1-f1f1b53a10f4@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17efi/unaccepted: touch soft lockup during memory acceptChen Yu
[ Upstream commit 1c5a1627f48105cbab81d25ec2f72232bfaa8185 ] Commit 50e782a86c98 ("efi/unaccepted: Fix soft lockups caused by parallel memory acceptance") has released the spinlock so other CPUs can do memory acceptance in parallel and not triggers softlockup on other CPUs. However the softlock up was intermittent shown up if the memory of the TD guest is large, and the timeout of softlockup is set to 1 second: RIP: 0010:_raw_spin_unlock_irqrestore Call Trace: ? __hrtimer_run_queues <IRQ> ? hrtimer_interrupt ? watchdog_timer_fn ? __sysvec_apic_timer_interrupt ? __pfx_watchdog_timer_fn ? sysvec_apic_timer_interrupt </IRQ> ? __hrtimer_run_queues <TASK> ? hrtimer_interrupt ? asm_sysvec_apic_timer_interrupt ? _raw_spin_unlock_irqrestore ? __sysvec_apic_timer_interrupt ? sysvec_apic_timer_interrupt accept_memory try_to_accept_memory do_huge_pmd_anonymous_page get_page_from_freelist __handle_mm_fault __alloc_pages __folio_alloc ? __tdx_hypercall handle_mm_fault vma_alloc_folio do_user_addr_fault do_huge_pmd_anonymous_page exc_page_fault ? __do_huge_pmd_anonymous_page asm_exc_page_fault __handle_mm_fault When the local irq is enabled at the end of accept_memory(), the softlockup detects that the watchdog on single CPU has not been fed for a while. That is to say, even other CPUs will not be blocked by spinlock, the current CPU might be stunk with local irq disabled for a while, which hurts not only nmi watchdog but also softlockup. Chao Gao pointed out that the memory accept could be time costly and there was similar report before. Thus to avoid any softlocup detection during this stage, give the softlockup a flag to skip the timeout check at the end of accept_memory(), by invoking touch_softlockup_watchdog(). Reported-by: Hossain, Md Iqbal <md.iqbal.hossain@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Fixes: 50e782a86c98 ("efi/unaccepted: Fix soft lockups caused by parallel memory acceptance") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17xdp: use flags field to disambiguate broadcast redirectToke Høiland-Jørgensen
[ Upstream commit 5bcf0dcbf9066348058b88a510c57f70f384c92c ] When redirecting a packet using XDP, the bpf_redirect_map() helper will set up the redirect destination information in struct bpf_redirect_info (using the __bpf_xdp_redirect_map() helper function), and the xdp_do_redirect() function will read this information after the XDP program returns and pass the frame on to the right redirect destination. When using the BPF_F_BROADCAST flag to do multicast redirect to a whole map, __bpf_xdp_redirect_map() sets the 'map' pointer in struct bpf_redirect_info to point to the destination map to be broadcast. And xdp_do_redirect() reacts to the value of this map pointer to decide whether it's dealing with a broadcast or a single-value redirect. However, if the destination map is being destroyed before xdp_do_redirect() is called, the map pointer will be cleared out (by bpf_clear_redirect_map()) without waiting for any XDP programs to stop running. This causes xdp_do_redirect() to think that the redirect was to a single target, but the target pointer is also NULL (since broadcast redirects don't have a single target), so this causes a crash when a NULL pointer is passed to dev_map_enqueue(). To fix this, change xdp_do_redirect() to react directly to the presence of the BPF_F_BROADCAST flag in the 'flags' value in struct bpf_redirect_info to disambiguate between a single-target and a broadcast redirect. And only read the 'map' pointer if the broadcast flag is set, aborting if that has been cleared out in the meantime. This prevents the crash, while keeping the atomic (cmpxchg-based) clearing of the map pointer itself, and without adding any more checks in the non-broadcast fast path. Fixes: e624d4ed4aa8 ("xdp: Extend xdp_redirect_map with broadcast support") Reported-and-tested-by: syzbot+af9492708df9797198d6@syzkaller.appspotmail.com Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/20240418071840.156411-1-toke@redhat.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 02:09:27 +0000