summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-05-18iio: imu: st_lsm6dsx: fix possible lockup in st_lsm6dsx_read_tagged_fifoSilvano Seva
commit 8114ef86e2058e2554111b793596f17bee23fa15 upstream. Prevent st_lsm6dsx_read_tagged_fifo from falling in an infinite loop in case pattern_len is equal to zero and the device FIFO is not empty. Fixes: 801a6e0af0c6 ("iio: imu: st_lsm6dsx: add support to LSM6DSO") Signed-off-by: Silvano Seva <s.seva@4sigma.it> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250311085030.3593-4-s.seva@4sigma.it Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18iio: imu: st_lsm6dsx: fix possible lockup in st_lsm6dsx_read_fifoSilvano Seva
commit 159ca7f18129834b6f4c7eae67de48e96c752fc9 upstream. Prevent st_lsm6dsx_read_fifo from falling in an infinite loop in case pattern_len is equal to zero and the device FIFO is not empty. Fixes: 290a6ce11d93 ("iio: imu: add support to lsm6dsx driver") Signed-off-by: Silvano Seva <s.seva@4sigma.it> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250311085030.3593-2-s.seva@4sigma.it Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18iio: imu: inv_mpu6050: align buffer for timestampDavid Lechner
commit 1d2d8524eaffc4d9a116213520d2c650e07c9cc6 upstream. Align the buffer used with iio_push_to_buffers_with_timestamp() to ensure the s64 timestamp is aligned to 8 bytes. Fixes: 0829edc43e0a ("iio: imu: inv_mpu6050: read the full fifo when processing data") Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-7-eafac1e22318@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18iio: hid-sensor-prox: Fix incorrect OFFSET calculationZhang Lixu
commit 79dabbd505210e41c88060806c92c052496dd61c upstream. The OFFSET calculation in the prox_read_raw() was incorrectly using the unit exponent, which is intended for SCALE calculations. Remove the incorrect OFFSET calculation and set it to a fixed value of 0. Cc: stable@vger.kernel.org Fixes: 39a3a0138f61 ("iio: hid-sensors: Added Proximity Sensor Driver") Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://patch.msgid.link/20250331055022.1149736-4-lixu.zhang@intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18iio: hid-sensor-prox: support multi-channel SCALE calculationZhang Lixu
commit 8b518cdb03f5f6e06d635cbfd9583d1fdbb39bfd upstream. With the introduction of multi-channel support in commit 596ef5cf654b ("iio: hid-sensor-prox: Add support for more channels"), each channel requires an independent SCALE calculation, but the existing code only calculates SCALE for a single channel. Addresses the problem by modifying the driver to perform independent SCALE calculations for each channel. Cc: stable@vger.kernel.org Fixes: 596ef5cf654b ("iio: hid-sensor-prox: Add support for more channels") Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://patch.msgid.link/20250331055022.1149736-3-lixu.zhang@intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18iio: hid-sensor-prox: Restore lost scale assignmentsZhang Lixu
commit 83ded7cfaccccd2f4041769c313b58b4c9e265ad upstream. The variables `scale_pre_decml`, `scale_post_decml`, and `scale_precision` were assigned in commit d68c592e02f6 ("iio: hid-sensor-prox: Fix scale not correct issue"), but due to a merge conflict in commit 9c15db92a8e5 ("Merge tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next"), these assignments were lost. Add back lost assignments and replace `st->prox_attr` with `st->prox_attr[0]` because commit 596ef5cf654b ("iio: hid-sensor-prox: Add support for more channels") changed `prox_attr` to an array. Cc: stable@vger.kernel.org # 5.13+ Fixes: 9c15db92a8e5 ("Merge tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next") Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://patch.msgid.link/20250331055022.1149736-2-lixu.zhang@intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18iio: chemical: pms7003: use aligned_s64 for timestampDavid Lechner
commit 6ffa698674053e82e811520642db2650d00d2c01 upstream. Follow the pattern of other drivers and use aligned_s64 for the timestamp. This will ensure that the timestamp is correctly aligned on all architectures. Also move the unaligned.h header while touching this since it was the only one not in alphabetical order. Fixes: 13e945631c2f ("iio:chemical:pms7003: Fix timestamp alignment and prevent data leak.") Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-4-eafac1e22318@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18iio: chemical: sps30: use aligned_s64 for timestampDavid Lechner
commit bb49d940344bcb8e2b19e69d7ac86f567887ea9a upstream. Follow the pattern of other drivers and use aligned_s64 for the timestamp. This will ensure that the timestamp is correctly aligned on all architectures. Fixes: a5bf6fdd19c3 ("iio:chemical:sps30: Fix timestamp alignment") Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-5-eafac1e22318@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18iio: adis16201: Correct inclinometer channel resolutionGabriel Shahrouzi
commit 609bc31eca06c7408e6860d8b46311ebe45c1fef upstream. The inclinometer channels were previously defined with 14 realbits. However, the ADIS16201 datasheet states the resolution for these output channels is 12 bits (Page 14, text description; Page 15, table 7). Correct the realbits value to 12 to accurately reflect the hardware. Fixes: f7fe1d1dd5a5 ("staging: iio: new adis16201 driver") Cc: stable@vger.kernel.org Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://patch.msgid.link/20250421131539.912966-1-gshahrouzi@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18iio: adc: rockchip: Fix clock initialization sequenceSimon Xue
commit 839f81de397019f55161c5982d670ac19d836173 upstream. clock_set_rate should be executed after devm_clk_get_enabled. Fixes: 97ad10bb2901 ("iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled") Signed-off-by: Simon Xue <xxm@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://patch.msgid.link/20250312062016.137821-1-xxm@rock-chips.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18iio: adc: ad7606: fix serial register accessAngelo Dureghello
commit f083f8a21cc785ebe3a33f756a3fa3660611f8db upstream. Fix register read/write routine as per datasheet. When reading multiple consecutive registers, only the first one is read properly. This is due to missing chip select deassert and assert again between first and second 16bit transfer, as shown in the datasheet AD7606C-16, rev 0, figure 110. Fixes: f2a22e1e172f ("iio: adc: ad7606: Add support for software mode for ad7616") Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Angelo Dureghello <adureghello@baylibre.com> Link: https://patch.msgid.link/20250418-wip-bl-ad7606-fix-reg-access-v3-1-d5eeb440c738@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18iio: adc: ad7266: Fix potential timestamp alignment issue.Jonathan Cameron
commit 52d349884738c346961e153f195f4c7fe186fcf4 upstream. On architectures where an s64 is only 32-bit aligned insufficient padding would be left between the earlier elements and the timestamp. Use aligned_s64 to enforce the correct placement and ensure the storage is large enough. Fixes: 54e018da3141 ("iio:ad7266: Mark transfer buffer as __be16") # aligned_s64 is much newer. Reported-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250413103443.2420727-2-jic23@kernel.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18iio: adc: ad7768-1: Fix insufficient alignment of timestamp.Jonathan Cameron
commit ffbc26bc91c1f1eb3dcf5d8776e74cbae21ee13a upstream. On architectures where an s64 is not 64-bit aligned, this may result insufficient alignment of the timestamp and the structure being too small. Use aligned_s64 to force the alignment. Fixes: a1caeebab07e ("iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp()") # aligned_s64 newer Reported-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250413103443.2420727-3-jic23@kernel.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18io_uring: ensure deferred completions are flushed for multishotJens Axboe
commit 687b2bae0efff9b25e071737d6af5004e6e35af5 upstream. Multishot normally uses io_req_post_cqe() to post completions, but when stopping it, it may finish up with a deferred completion. This is fine, except if another multishot event triggers before the deferred completions get flushed. If this occurs, then CQEs may get reordered in the CQ ring, as new multishot completions get posted before the deferred ones are flushed. This can cause confusion on the application side, if strict ordering is required for the use case. When multishot posting via io_req_post_cqe(), flush any pending deferred completions first, if any. Cc: stable@vger.kernel.org # 6.1+ Reported-by: Norman Maurer <norman_maurer@apple.com> Reported-by: Christian Mazakas <christian.mazakas@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18riscv: Fix kernel crash due to PR_SET_TAGGED_ADDR_CTRLNam Cao
commit ae08d55807c099357c047dba17624b09414635dd upstream. When userspace does PR_SET_TAGGED_ADDR_CTRL, but Supm extension is not available, the kernel crashes: Oops - illegal instruction [#1] [snip] epc : set_tagged_addr_ctrl+0x112/0x15a ra : set_tagged_addr_ctrl+0x74/0x15a epc : ffffffff80011ace ra : ffffffff80011a30 sp : ffffffc60039be10 [snip] status: 0000000200000120 badaddr: 0000000010a79073 cause: 0000000000000002 set_tagged_addr_ctrl+0x112/0x15a __riscv_sys_prctl+0x352/0x73c do_trap_ecall_u+0x17c/0x20c andle_exception+0x150/0x15c Fix it by checking if Supm is available. Fixes: 09d6775f503b ("riscv: Add support for userspace pointer masking") Signed-off-by: Nam Cao <namcao@linutronix.de> Cc: stable@vger.kernel.org Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20250504101920.3393053-1-namcao@linutronix.de Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18drm/amd/display: Shift DMUB AUX reply command if necessaryWayne Lin
commit 5a3846648c0523fd850b7f0aec78c0139453ab8b upstream. [Why] Defined value of dmub AUX reply command field get updated but didn't adjust dm receiving side accordingly. [How] Check the received reply command value to see if it's updated version or not. Adjust it if necessary. Fixes: ead08b95fa50 ("drm/amd/display: Fix race condition in DPIA AUX transfer") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ray Wu <ray.wu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit d5c9ade755a9afa210840708a12a8f44c0d532f4) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interceptionMikhail Lobanov
commit a2620f8932fa9fdabc3d78ed6efb004ca409019f upstream. Previously, commit ed129ec9057f ("KVM: x86: forcibly leave nested mode on vCPU reset") addressed an issue where a triple fault occurring in nested mode could lead to use-after-free scenarios. However, the commit did not handle the analogous situation for System Management Mode (SMM). This omission results in triggering a WARN when KVM forces a vCPU INIT after SHUTDOWN interception while the vCPU is in SMM. This situation was reprodused using Syzkaller by: 1) Creating a KVM VM and vCPU 2) Sending a KVM_SMI ioctl to explicitly enter SMM 3) Executing invalid instructions causing consecutive exceptions and eventually a triple fault The issue manifests as follows: WARNING: CPU: 0 PID: 25506 at arch/x86/kvm/x86.c:12112 kvm_vcpu_reset+0x1d2/0x1530 arch/x86/kvm/x86.c:12112 Modules linked in: CPU: 0 PID: 25506 Comm: syz-executor.0 Not tainted 6.1.130-syzkaller-00157-g164fe5dde9b6 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:kvm_vcpu_reset+0x1d2/0x1530 arch/x86/kvm/x86.c:12112 Call Trace: <TASK> shutdown_interception+0x66/0xb0 arch/x86/kvm/svm/svm.c:2136 svm_invoke_exit_handler+0x110/0x530 arch/x86/kvm/svm/svm.c:3395 svm_handle_exit+0x424/0x920 arch/x86/kvm/svm/svm.c:3457 vcpu_enter_guest arch/x86/kvm/x86.c:10959 [inline] vcpu_run+0x2c43/0x5a90 arch/x86/kvm/x86.c:11062 kvm_arch_vcpu_ioctl_run+0x50f/0x1cf0 arch/x86/kvm/x86.c:11283 kvm_vcpu_ioctl+0x570/0xf00 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4122 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Architecturally, INIT is blocked when the CPU is in SMM, hence KVM's WARN() in kvm_vcpu_reset() to guard against KVM bugs, e.g. to detect improper emulation of INIT. SHUTDOWN on SVM is a weird edge case where KVM needs to do _something_ sane with the VMCB, since it's technically undefined, and INIT is the least awful choice given KVM's ABI. So, double down on stuffing INIT on SHUTDOWN, and force the vCPU out of SMM to avoid any weirdness (and the WARN). Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: ed129ec9057f ("KVM: x86: forcibly leave nested mode on vCPU reset") Cc: stable@vger.kernel.org Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Mikhail Lobanov <m.lobanov@rosa.ru> Link: https://lore.kernel.org/r/20250414171207.155121-1-m.lobanov@rosa.ru [sean: massage changelog, make it clear this isn't architectural behavior] Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18KVM: x86/mmu: Prevent installing hugepages when mem attributes are changingSean Christopherson
commit 9129633d568edd36aa22bf703b12835153cec985 upstream. When changing memory attributes on a subset of a potential hugepage, add the hugepage to the invalidation range tracking to prevent installing a hugepage until the attributes are fully updated. Like the actual hugepage tracking updates in kvm_arch_post_set_memory_attributes(), process only the head and tail pages, as any potential hugepages that are entirely covered by the range will already be tracked. Note, only hugepage chunks whose current attributes are NOT mixed need to be added to the invalidation set, as mixed attributes already prevent installing a hugepage, and it's perfectly safe to install a smaller mapping for a gfn whose attributes aren't changing. Fixes: 8dd2eee9d526 ("KVM: x86/mmu: Handle page fault for private memory") Cc: stable@vger.kernel.org Reported-by: Michael Roth <michael.roth@amd.com> Tested-by: Michael Roth <michael.roth@amd.com> Link: https://lore.kernel.org/r/20250430220954.522672-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18selftests/mm: fix build break when compiling pkey_util.cMadhavan Srinivasan
commit 22adb528621ddc92f887882a658507fbf88a5214 upstream. Commit 50910acd6f615 ("selftests/mm: use sys_pkey helpers consistently") added a pkey_util.c to refactor some of the protection_keys functions accessible by other tests. But this broken the build in powerpc in two ways, pkey-powerpc.h: In function `arch_is_powervm': pkey-powerpc.h:73:21: error: storage size of `buf' isn't known 73 | struct stat buf; | ^~~ pkey-powerpc.h:75:14: error: implicit declaration of function `stat'; did you mean `strcat'? [-Wimplicit-function-declaration] 75 | if ((stat("/sys/firmware/devicetree/base/ibm,partition-name", &buf) == 0) && | ^~~~ | strcat Since pkey_util.c includes pkeys-helper.h, which in turn includes pkeys-powerpc.h, stat.h including is missing for "struct stat". This is fixed by adding "sys/stat.h" in pkeys-powerpc.h Secondly, pkey-powerpc.h:55:18: warning: format `%llx' expects argument of type `long long unsigned int', but argument 3 has type `u64' {aka `long unsigned int'} [-Wformat=] 55 | dprintf4("%s() changing %016llx to %016llx\n", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 56 | __func__, __read_pkey_reg(), pkey_reg); | ~~~~~~~~~~~~~~~~~ | | | u64 {aka long unsigned int} pkey-helpers.h:63:32: note: in definition of macro `dprintf_level' 63 | sigsafe_printf(args); \ | ^~~~ These format specifier related warning are removed by adding "__SANE_USERSPACE_TYPES__" to pkeys_utils.c. Link: https://lkml.kernel.org/r/20250428131937.641989-1-nysal@linux.ibm.com Fixes: 50910acd6f61 ("selftests/mm: use sys_pkey helpers consistently") Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18selftests/mm: fix a build failure on powerpcNysal Jan K.A.
commit 8cf6ecb18baac867585fe1cba5dde6dbf3b6d29a upstream. The compiler is unaware of the size of code generated by the ".rept" assembler directive. This results in the compiler emitting branch instructions where the offset to branch to exceeds the maximum allowed value, resulting in build failures like the following: CC protection_keys /tmp/ccypKWAE.s: Assembler messages: /tmp/ccypKWAE.s:2073: Error: operand out of range (0x0000000000020158 is not between 0xffffffffffff8000 and 0x0000000000007ffc) /tmp/ccypKWAE.s:2509: Error: operand out of range (0x0000000000020130 is not between 0xffffffffffff8000 and 0x0000000000007ffc) Fix the issue by manually adding nop instructions using the preprocessor. Link: https://lkml.kernel.org/r/20250428131937.641989-2-nysal@linux.ibm.com Fixes: 46036188ea1f ("selftests/mm: build with -O2") Reported-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Reviewed-by: Donet Tom <donettom@linux.ibm.com> Tested-by: Donet Tom <donettom@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18selftests/mm: compaction_test: support platform with huge mount of memoryFeng Tang
commit ab00ddd802f80e31fc9639c652d736fe3913feae upstream. When running mm selftest to verify mm patches, 'compaction_test' case failed on an x86 server with 1TB memory. And the root cause is that it has too much free memory than what the test supports. The test case tries to allocate 100000 huge pages, which is about 200 GB for that x86 server, and when it succeeds, it expects it's large than 1/3 of 80% of the free memory in system. This logic only works for platform with 750 GB ( 200 / (1/3) / 80% ) or less free memory, and may raise false alarm for others. Fix it by changing the fixed page number to self-adjustable number according to the real number of free memory. Link: https://lkml.kernel.org/r/20250423103645.2758-1-feng.tang@linux.alibaba.com Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory") Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com> Acked-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Baolin Wang <baolin.wang@inux.alibaba.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Sri Jayaramappa <sjayaram@akamai.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18mm/userfaultfd: fix uninitialized output field for -EAGAIN racePeter Xu
commit 95567729173e62e0e60a1f8ad9eb2e1320a8ccac upstream. While discussing some userfaultfd relevant issues recently, Andrea noticed a potential ABI breakage with -EAGAIN on almost all userfaultfd ioctl()s. Quote from Andrea, explaining how -EAGAIN was processed, and how this should fix it (taking example of UFFDIO_COPY ioctl): The "mmap_changing" and "stale pmd" conditions are already reported as -EAGAIN written in the copy field, this does not change it. This change removes the subnormal case that left copy.copy uninitialized and required apps to explicitly set the copy field to get deterministic behavior (which is a requirement contrary to the documentation in both the manpage and source code). In turn there's no alteration to backwards compatibility as result of this change because userland will find the copy field consistently set to -EAGAIN, and not anymore sometime -EAGAIN and sometime uninitialized. Even then the change only can make a difference to non cooperative users of userfaultfd, so when UFFD_FEATURE_EVENT_* is enabled, which is not true for the vast majority of apps using userfaultfd or this unintended uninitialized field may have been noticed sooner. Meanwhile, since this bug existed for years, it also almost affects all ioctl()s that was introduced later. Besides UFFDIO_ZEROPAGE, these also get affected in the same way: - UFFDIO_CONTINUE - UFFDIO_POISON - UFFDIO_MOVE This patch should have fixed all of them. Link: https://lkml.kernel.org/r/20250424215729.194656-2-peterx@redhat.com Fixes: df2cc96e7701 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races") Fixes: f619147104c8 ("userfaultfd: add UFFDIO_CONTINUE ioctl") Fixes: fc71884a5f59 ("mm: userfaultfd: add new UFFDIO_POISON ioctl") Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI") Signed-off-by: Peter Xu <peterx@redhat.com> Reported-by: Andrea Arcangeli <aarcange@redhat.com> Suggested-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18mm/huge_memory: fix dereferencing invalid pmd migration entryGavin Guo
commit be6e843fc51a584672dfd9c4a6a24c8cb81d5fb7 upstream. When migrating a THP, concurrent access to the PMD migration entry during a deferred split scan can lead to an invalid address access, as illustrated below. To prevent this invalid access, it is necessary to check the PMD migration entry and return early. In this context, there is no need to use pmd_to_swp_entry and pfn_swap_entry_to_page to verify the equality of the target folio. Since the PMD migration entry is locked, it cannot be served as the target. Mailing list discussion and explanation from Hugh Dickins: "An anon_vma lookup points to a location which may contain the folio of interest, but might instead contain another folio: and weeding out those other folios is precisely what the "folio != pmd_folio((*pmd)" check (and the "risk of replacing the wrong folio" comment a few lines above it) is for." BUG: unable to handle page fault for address: ffffea60001db008 CPU: 0 UID: 0 PID: 2199114 Comm: tee Not tainted 6.14.0+ #4 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:split_huge_pmd_locked+0x3b5/0x2b60 Call Trace: <TASK> try_to_migrate_one+0x28c/0x3730 rmap_walk_anon+0x4f6/0x770 unmap_folio+0x196/0x1f0 split_huge_page_to_list_to_order+0x9f6/0x1560 deferred_split_scan+0xac5/0x12a0 shrinker_debugfs_scan_write+0x376/0x470 full_proxy_write+0x15c/0x220 vfs_write+0x2fc/0xcb0 ksys_write+0x146/0x250 do_syscall_64+0x6a/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e The bug is found by syzkaller on an internal kernel, then confirmed on upstream. Link: https://lkml.kernel.org/r/20250421113536.3682201-1-gavinguo@igalia.com Link: https://lore.kernel.org/all/20250414072737.1698513-1-gavinguo@igalia.com/ Link: https://lore.kernel.org/all/20250418085802.2973519-1-gavinguo@igalia.com/ Fixes: 84c3fc4e9c56 ("mm: thp: check pmd migration entry in common path") Signed-off-by: Gavin Guo <gavinguo@igalia.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Cc: Florent Revest <revest@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18mm: vmalloc: support more granular vrealloc() sizingKees Cook
commit a0309faf1cb0622cac7c820150b7abf2024acff5 upstream. Introduce struct vm_struct::requested_size so that the requested (re)allocation size is retained separately from the allocated area size. This means that KASAN will correctly poison the correct spans of requested bytes. This also means we can support growing the usable portion of an allocation that can already be supported by the existing area's existing allocation. Link: https://lkml.kernel.org/r/20250426001105.it.679-kees@kernel.org Fixes: 3ddc2fefe6f3 ("mm: vmalloc: implement vrealloc()") Signed-off-by: Kees Cook <kees@kernel.org> Reported-by: Erhard Furtner <erhard_f@mailbox.org> Closes: https://lore.kernel.org/all/20250408192503.6149a816@outsider.home/ Reviewed-by: Danilo Krummrich <dakr@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18mm: fix folio_pte_batch() on XEN PVPetr Vaněk
commit 7b08b74f3d99f6b801250683c751d391128799ec upstream. On XEN PV, folio_pte_batch() can incorrectly batch beyond the end of a folio due to a corner case in pte_advance_pfn(). Specifically, when the PFN following the folio maps to an invalidated MFN, expected_pte = pte_advance_pfn(expected_pte, nr); produces a pte_none(). If the actual next PTE in memory is also pte_none(), the pte_same() succeeds, if (!pte_same(pte, expected_pte)) break; the loop is not broken, and batching continues into unrelated memory. For example, with a 4-page folio, the PTE layout might look like this: [ 53.465673] [ T2552] folio_pte_batch: printing PTE values at addr=0x7f1ac9dc5000 [ 53.465674] [ T2552] PTE[453] = 000000010085c125 [ 53.465679] [ T2552] PTE[454] = 000000010085d125 [ 53.465682] [ T2552] PTE[455] = 000000010085e125 [ 53.465684] [ T2552] PTE[456] = 000000010085f125 [ 53.465686] [ T2552] PTE[457] = 0000000000000000 <-- not present [ 53.465689] [ T2552] PTE[458] = 0000000101da7125 pte_advance_pfn(PTE[456]) returns a pte_none() due to invalid PFN->MFN mapping. The next actual PTE (PTE[457]) is also pte_none(), so the loop continues and includes PTE[457] in the batch, resulting in 5 batched entries for a 4-page folio. This triggers the following warning: [ 53.465751] [ T2552] page: refcount:85 mapcount:20 mapping:ffff88813ff4f6a8 index:0x110 pfn:0x10085c [ 53.465754] [ T2552] head: order:2 mapcount:80 entire_mapcount:0 nr_pages_mapped:4 pincount:0 [ 53.465756] [ T2552] memcg:ffff888003573000 [ 53.465758] [ T2552] aops:0xffffffff8226fd20 ino:82467c dentry name(?):"libc.so.6" [ 53.465761] [ T2552] flags: 0x2000000000416c(referenced|uptodate|lru|active|private|head|node=0|zone=2) [ 53.465764] [ T2552] raw: 002000000000416c ffffea0004021f08 ffffea0004021908 ffff88813ff4f6a8 [ 53.465767] [ T2552] raw: 0000000000000110 ffff888133d8bd40 0000005500000013 ffff888003573000 [ 53.465768] [ T2552] head: 002000000000416c ffffea0004021f08 ffffea0004021908 ffff88813ff4f6a8 [ 53.465770] [ T2552] head: 0000000000000110 ffff888133d8bd40 0000005500000013 ffff888003573000 [ 53.465772] [ T2552] head: 0020000000000202 ffffea0004021701 000000040000004f 00000000ffffffff [ 53.465774] [ T2552] head: 0000000300000003 8000000300000002 0000000000000013 0000000000000004 [ 53.465775] [ T2552] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1), const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *: (struct folio *)_compound_head(page + nr_pages - 1))) != folio) Original code works as expected everywhere, except on XEN PV, where pte_advance_pfn() can yield a pte_none() after balloon inflation due to MFNs invalidation. In XEN, pte_advance_pfn() ends up calling __pte()->xen_make_pte()->pte_pfn_to_mfn(), which returns pte_none() when mfn == INVALID_P2M_ENTRY. The pte_pfn_to_mfn() documents that nastiness: If there's no mfn for the pfn, then just create an empty non-present pte. Unfortunately this loses information about the original pfn, so pte_mfn_to_pfn is asymmetric. While such hacks should certainly be removed, we can do better in folio_pte_batch() and simply check ahead of time how many PTEs we can possibly batch in our folio. This way, we can not only fix the issue but cleanup the code: removing the pte_pfn() check inside the loop body and avoiding end_ptr comparison + arithmetic. Link: https://lkml.kernel.org/r/20250502215019.822-2-arkamar@atlas.cz Fixes: f8d937761d65 ("mm/memory: optimize fork() with PTE-mapped THP") Co-developed-by: David Hildenbrand <david@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Petr Vaněk <arkamar@atlas.cz> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18x86/mm: Eliminate window where TLB flushes may be inadvertently skippedDave Hansen
commit fea4e317f9e7e1f449ce90dedc27a2d2a95bee5a upstream. tl;dr: There is a window in the mm switching code where the new CR3 is set and the CPU should be getting TLB flushes for the new mm. But should_flush_tlb() has a bug and suppresses the flush. Fix it by widening the window where should_flush_tlb() sends an IPI. Long Version: === History === There were a few things leading up to this. First, updating mm_cpumask() was observed to be too expensive, so it was made lazier. But being lazy caused too many unnecessary IPIs to CPUs due to the now-lazy mm_cpumask(). So code was added to cull mm_cpumask() periodically[2]. But that culling was a bit too aggressive and skipped sending TLB flushes to CPUs that need them. So here we are again. === Problem === The too-aggressive code in should_flush_tlb() strikes in this window: // Turn on IPIs for this CPU/mm combination, but only // if should_flush_tlb() agrees: cpumask_set_cpu(cpu, mm_cpumask(next)); next_tlb_gen = atomic64_read(&next->context.tlb_gen); choose_new_asid(next, next_tlb_gen, &new_asid, &need_flush); load_new_mm_cr3(need_flush); // ^ After 'need_flush' is set to false, IPIs *MUST* // be sent to this CPU and not be ignored. this_cpu_write(cpu_tlbstate.loaded_mm, next); // ^ Not until this point does should_flush_tlb() // become true! should_flush_tlb() will suppress TLB flushes between load_new_mm_cr3() and writing to 'loaded_mm', which is a window where they should not be suppressed. Whoops. === Solution === Thankfully, the fuzzy "just about to write CR3" window is already marked with loaded_mm==LOADED_MM_SWITCHING. Simply checking for that state in should_flush_tlb() is sufficient to ensure that the CPU is targeted with an IPI. This will cause more TLB flush IPIs. But the window is relatively small and I do not expect this to cause any kind of measurable performance impact. Update the comment where LOADED_MM_SWITCHING is written since it grew yet another user. Peter Z also raised a concern that should_flush_tlb() might not observe 'loaded_mm' and 'is_lazy' in the same order that switch_mm_irqs_off() writes them. Add a barrier to ensure that they are observed in the order they are written. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Rik van Riel <riel@surriel.com> Link: https://lore.kernel.org/oe-lkp/202411282207.6bd28eae-lkp@intel.com/ [1] Fixes: 6db2526c1d69 ("x86/mm/tlb: Only trim the mm_cpumask once a second") [2] Reported-by: Stephen Dolan <sdolan@janestreet.com> Cc: stable@vger.kernel.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18staging: axis-fifo: Correct handling of tx_fifo_depth for size validationGabriel Shahrouzi
commit 2ca34b508774aaa590fc3698a54204706ecca4ba upstream. Remove erroneous subtraction of 4 from the total FIFO depth read from device tree. The stored depth is for checking against total capacity, not initial vacancy. This prevented writes near the FIFO's full size. The check performed just before data transfer, which uses live reads of the TDFV register to determine current vacancy, correctly handles the initial Depth - 4 hardware state and subsequent FIFO fullness. Fixes: 4a965c5f89de ("staging: add driver for Xilinx AXI-Stream FIFO v4.1 IP core") Cc: stable@vger.kernel.org Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com> Link: https://lore.kernel.org/r/20250419012937.674924-1-gshahrouzi@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18staging: axis-fifo: Remove hardware resets for user errorsGabriel Shahrouzi
commit c6e8d85fafa7193613db37da29c0e8d6e2515b13 upstream. The axis-fifo driver performs a full hardware reset (via reset_ip_core()) in several error paths within the read and write functions. This reset flushes both TX and RX FIFOs and resets the AXI-Stream links. Allow the user to handle the error without causing hardware disruption or data loss in other FIFO paths. Fixes: 4a965c5f89de ("staging: add driver for Xilinx AXI-Stream FIFO v4.1 IP core") Cc: stable@vger.kernel.org Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com> Link: https://lore.kernel.org/r/20250419004306.669605-1-gshahrouzi@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18staging: bcm2835-camera: Initialise dev in v4l2_devDave Stevenson
commit 98698ca0e58734bc5c1c24e5bbc7429f981cd186 upstream. Commit 42a2f6664e18 ("staging: vc04_services: Move global g_state to vchiq_state") changed mmal_init to pass dev->v4l2_dev.dev to vchiq_mmal_init, however nothing iniitialised dev->v4l2_dev, so we got a NULL pointer dereference. Set dev->v4l2_dev.dev during bcm2835_mmal_probe. The device pointer could be passed into v4l2_device_register to set it, however that also has other effects that would need additional changes. Fixes: 42a2f6664e18 ("staging: vc04_services: Move global g_state to vchiq_state") Cc: stable@vger.kernel.org Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20250423-staging-bcm2835-v4l2-fix-v2-1-3227f0ba4700@raspberrypi.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18staging: iio: adc: ad7816: Correct conditional logic for store modeGabriel Shahrouzi
commit 2e922956277187655ed9bedf7b5c28906e51708f upstream. The mode setting logic in ad7816_store_mode was reversed due to incorrect handling of the strcmp return value. strcmp returns 0 on match, so the `if (strcmp(buf, "full"))` block executed when the input was not "full". This resulted in "full" setting the mode to AD7816_PD (power-down) and other inputs setting it to AD7816_FULL. Fix this by checking it against 0 to correctly check for "full" and "power-down", mapping them to AD7816_FULL and AD7816_PD respectively. Fixes: 7924425db04a ("staging: iio: adc: new driver for AD7816 devices") Cc: stable@vger.kernel.org Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com> Acked-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/stable/20250414152920.467505-1-gshahrouzi%40gmail.com Link: https://patch.msgid.link/20250414154050.469482-1-gshahrouzi@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18uio_hv_generic: Fix sysfs creation path for ring bufferNaman Jain
commit f31fe8165d365379d858c53bef43254c7d6d1cfd upstream. On regular bootup, devices get registered to VMBus first, so when uio_hv_generic driver for a particular device type is probed, the device is already initialized and added, so sysfs creation in hv_uio_probe() works fine. However, when the device is removed and brought back, the channel gets rescinded and the device again gets registered to VMBus. However this time, the uio_hv_generic driver is already registered to probe for that device and in this case sysfs creation is tried before the device's kobject gets initialized completely. Fix this by moving the core logic of sysfs creation of ring buffer, from uio_hv_generic to HyperV's VMBus driver, where the rest of the sysfs attributes for the channels are defined. While doing that, make use of attribute groups and macros, instead of creating sysfs directly, to ensure better error handling and code flow. Problematic path: vmbus_process_offer (A new offer comes for the VMBus device) vmbus_add_channel_work vmbus_device_register |-> device_register | |... | |-> hv_uio_probe | |... | |-> sysfs_create_bin_file (leads to a warning as | the primary channel's kobject, which is used to | create the sysfs file, is not yet initialized) |-> kset_create_and_add |-> vmbus_add_channel_kobj (initialization of the primary channel's kobject happens later) Above code flow is sequential and the warning is always reproducible in this path. Fixes: 9ab877a6ccf8 ("uio_hv_generic: make ring buffer attribute for primary channel") Cc: stable@kernel.org Suggested-by: Saurabh Sengar <ssengar@linux.microsoft.com> Suggested-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Naman Jain <namjain@linux.microsoft.com> Link: https://lore.kernel.org/r/20250502074811.2022-2-namjain@linux.microsoft.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18rust: clean Rust 1.88.0's warning about `clippy::disallowed_macros` ↵Miguel Ojeda
configuration commit c016722fd57551f8a6fcf472c9d2bcf2130ea0ec upstream. Starting with Rust 1.88.0 (expected 2025-06-26) [1], Clippy may start warning about paths that do not resolve in the `disallowed_macros` configuration: warning: `kernel::dbg` does not refer to an existing macro --> .clippy.toml:10:5 | 10 | { path = "kernel::dbg", reason = "the `dbg!` macro is intended as a debugging tool" }, | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This is a lint we requested at [2], due to the trouble debugging the lint due to false negatives (e.g. [3]), which we use to emulate `clippy::dbg_macro` [4]. See commit 8577c9dca799 ("rust: replace `clippy::dbg_macro` with `disallowed_macros`") for more details. Given the false negatives are not resolved yet, it is expected that Clippy complains about not finding this macro. Thus, until the false negatives are fixed (and, even then, probably we will need to wait for the MSRV to raise enough), use the escape hatch to allow an invalid path. Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs). Link: https://github.com/rust-lang/rust-clippy/pull/14397 [1] Link: https://github.com/rust-lang/rust-clippy/issues/11432 [2] Link: https://github.com/rust-lang/rust-clippy/issues/11431 [3] Link: https://github.com/rust-lang/rust-clippy/issues/11303 [4] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250502140237.1659624-5-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18objtool/rust: add one more `noreturn` Rust function for Rust 1.87.0Miguel Ojeda
commit 19f5ca461d5fc09bdf93a9f8e4bd78ed3a49dc71 upstream. Starting with Rust 1.87.0 (expected 2025-05-15), `objtool` may report: rust/core.o: warning: objtool: _R..._4core9panicking9panic_fmt() falls through to next function _R..._4core9panicking18panic_nounwind_fmt() rust/core.o: warning: objtool: _R..._4core9panicking18panic_nounwind_fmt() falls through to next function _R..._4core9panicking5panic() The reason is that `rust_begin_unwind` is now mangled: _R..._7___rustc17rust_begin_unwind Thus add the mangled one to the list so that `objtool` knows it is actually `noreturn`. See commit 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions") for more details. Alternatively, we could remove the fixed one in `noreturn.h` and relax this test to cover both, but it seems best to be strict as long as we can. Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs). Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250502140237.1659624-2-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18rust: clean Rust 1.88.0's `unnecessary_transmutes` lintMiguel Ojeda
commit 7129ea6e242b00938532537da41ddf5fa3e21471 upstream. Starting with Rust 1.88.0 (expected 2025-06-26) [1][2], `rustc` may introduce a new lint that catches unnecessary transmutes, e.g.: error: unnecessary transmute --> rust/uapi/uapi_generated.rs:23242:18 | 23242 | unsafe { ::core::mem::transmute(self._bitfield_1.get(0usize, 1u8) as u8) } | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace this with: `(self._bitfield_1.get(0usize, 1u8) as u8 == 1)` | = note: `-D unnecessary-transmutes` implied by `-D warnings` = help: to override `-D warnings` add `#[allow(unnecessary_transmutes)]` There are a lot of them (at least 300), but luckily they are all in `bindgen`-generated code. Thus clean all up by allowing it there. Since unknown lints trigger a lint itself in older compilers, do it conditionally so that we can keep the `unknown_lints` lint enabled. Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs). Link: https://github.com/rust-lang/rust/pull/136083 [1] Link: https://github.com/rust-lang/rust/issues/136067 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250502140237.1659624-4-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5Aditya Garg
commit 2abc698ac77314e0de5b33a6d96a39c5159d88e4 upstream. Enable InterTouch mode on TUXEDO InfinityBook Pro 14 v5 by adding "SYN1221" to the list of SMBus-enabled variants. Add support for InterTouch on SYN1221 by adding it to the list of SMBus-enabled variants. Reported-by: Matthias Eilert <kernel.hias@eilert.tech> Tested-by: Matthias Eilert <kernel.hias@eilert.tech> Signed-off-by: Aditya Garg <gargaditya08@live.com> Link: https://lore.kernel.org/r/PN3PR01MB9597C033C4BC20EE2A0C4543B888A@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18Input: synaptics - enable SMBus for HP Elitebook 850 G1Dmitry Torokhov
commit f04f03d3e99bc8f89b6af5debf07ff67d961bc23 upstream. The kernel reports that the touchpad for this device can support SMBus mode. Reported-by: jt <enopatch@gmail.com> Link: https://lore.kernel.org/r/iys5dbv3ldddsgobfkxldazxyp54kay4bozzmagga6emy45jop@2ebvuxgaui4u Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18Input: synaptics - enable InterTouch on Dell Precision M3800Aditya Garg
commit a609cb4cc07aa9ab8f50466622814356c06f2c17 upstream. Enable InterTouch mode on Dell Precision M3800 by adding "DLL060d" to the list of SMBus-enabled variants. Reported-by: Markus Rathgeb <maggu2810@gmail.com> Signed-off-by: Aditya Garg <gargaditya08@live.com> Link: https://lore.kernel.org/r/PN3PR01MB959789DD6D574E16141E5DC4B888A@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18Input: synaptics - enable InterTouch on Dynabook Portege X30L-GAditya Garg
commit 47d768b32e644b56901bb4bbbdb1feb01ea86c85 upstream. Enable InterTouch mode on Dynabook Portege X30L-G by adding "TOS01f6" to the list of SMBus-enabled variants. Reported-by: Xuntao Chi <chotaotao1qaz2wsx@gmail.com> Tested-by: Xuntao Chi <chotaotao1qaz2wsx@gmail.com> Signed-off-by: Aditya Garg <gargaditya08@live.com> Link: https://lore.kernel.org/r/PN3PR01MB959786E4AC797160CDA93012B888A@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18Input: synaptics - enable InterTouch on Dynabook Portege X30-DManuel Fombuena
commit 6d7ea0881000966607772451b789b5fb5766f11d upstream. [ 5.989588] psmouse serio1: synaptics: Your touchpad (PNP: TOS0213 PNP0f03) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 6.039923] psmouse serio1: synaptics: Touchpad model: 1, fw: 9.32, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x52d884, board id: 3322, fw id: 2658004 The board is labelled TM3322. Present on the Toshiba / Dynabook Portege X30-D and possibly others. Confirmed working well with psmouse.synaptics_intertouch=1 and local build. Signed-off-by: Manuel Fombuena <fombuena@outlook.com> Signed-off-by: Aditya Garg <gargaditya08@live.com> Link: https://lore.kernel.org/r/PN3PR01MB9597711E7933A08389FEC31DB888A@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18Input: xpad - fix two controller table valuesVicki Pfau
commit d05a424bea9aa3435009d5c462055008cc1545d8 upstream. Two controllers -- Mad Catz JOYTECH NEO SE Advanced and PDP Mirror's Edge Official -- were missing the value of the mapping field, and thus wouldn't detect properly. Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20250328234345.989761-1-vi@endrift.com Fixes: 540602a43ae5 ("Input: xpad - add a few new VID/PID combinations") Fixes: 3492321e2e60 ("Input: xpad - add multiple supported devices") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18Input: xpad - add support for 8BitDo Ultimate 2 Wireless ControllerLode Willems
commit 22cd66a5db56a07d9e621367cb4d16ff0f6baf56 upstream. This patch adds support for the 8BitDo Ultimate 2 Wireless Controller. Tested using the wireless dongle and plugged in. Signed-off-by: Lode Willems <me@lodewillems.com> Link: https://lore.kernel.org/r/20250422112457.6728-1-me@lodewillems.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18Input: xpad - fix Share button on Xbox One controllersVicki Pfau
commit 4ef46367073b107ec22f46fe5f12176e87c238e8 upstream. The Share button, if present, is always one of two offsets from the end of the file, depending on the presence of a specific interface. As we lack parsing for the identify packet we can't automatically determine the presence of that interface, but we can hardcode which of these offsets is correct for a given controller. More controllers are probably fixable by adding the MAP_SHARE_BUTTON in the future, but for now I only added the ones that I have the ability to test directly. Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20250328234345.989761-2-vi@endrift.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18Input: mtk-pmic-keys - fix possible null pointer dereferenceGary Bisson
commit 11cdb506d0fbf5ac05bf55f5afcb3a215c316490 upstream. In mtk_pmic_keys_probe, the regs parameter is only set if the button is parsed in the device tree. However, on hardware where the button is left floating, that node will most likely be removed not to enable that input. In that case the code will try to dereference a null pointer. Let's use the regs struct instead as it is defined for all supported platforms. Note that it is ok setting the key reg even if that latter is disabled as the interrupt won't be enabled anyway. Fixes: b581acb49aec ("Input: mtk-pmic-keys - transfer per-key bit in mtk_pmic_keys_regs") Signed-off-by: Gary Bisson <bisson.gary@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18Input: cyttsp5 - fix power control issue on wakeupMikael Gonella-Bolduc
commit 7675b5efd81fe6d524e29d5a541f43201e98afa8 upstream. The power control function ignores the "on" argument when setting the report ID, and thus is always sending HID_POWER_SLEEP. This causes a problem when trying to wakeup. Fix by sending the state variable, which contains the proper HID_POWER_ON or HID_POWER_SLEEP based on the "on" argument. Fixes: 3c98b8dbdced ("Input: cyttsp5 - implement proper sleep and wakeup procedures") Cc: stable@vger.kernel.org Signed-off-by: Mikael Gonella-Bolduc <mgonellabolduc@dimonoff.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20250423135243.1261460-1-hugo@hugovil.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18Input: cyttsp5 - ensure minimum reset pulse widthHugo Villeneuve
commit c6cb8bf79466ae66bd0d07338c7c505ce758e9d7 upstream. The current reset pulse width is measured to be 5us on a Renesas RZ/G2L SOM. The manufacturer's minimum reset pulse width is specified as 10us. Extend reset pulse width to make sure it is long enough on all platforms. Also reword confusing comments about reset pin assertion. Fixes: 5b0c03e24a06 ("Input: Add driver for Cypress Generation 5 touchscreen") Cc: stable@vger.kernel.org Acked-by: Alistair Francis <alistair@alistair23.me> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20250410184633.1164837-1-hugo@hugovil.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18virtio-net: fix total qstat valuesJakub Kicinski
[ Upstream commit 001160ec8c59115efc39e197d40829bdafd4d7f5 ] NIPA tests report that the interface statistics reported via qstat are lower than those reported via ip link. Looks like this is because some tests flip the queue count up and down, and we end up with some of the traffic accounted on disabled queues. Add up counters from disabled queues. Fixes: d888f04c09bb ("virtio-net: support queue stat") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250507003221.823267-3-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18net: export a helper for adding up queue statsJakub Kicinski
[ Upstream commit 23fa6a23d97182d36ca3c71e43c804fa91e46a03 ] Older drivers and drivers with lower queue counts often have a static array of queues, rather than allocating structs for each queue on demand. Add a helper for adding up qstats from a queue range. Expectation is that driver will pass a queue range [netdev->real_num_*x_queues, MAX). It was tempting to always use num_*x_queues as the end, but virtio seems to clamp its queue count after allocating the netdev. And this way we can trivaly reuse the helper for [0, real_..). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250507003221.823267-2-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: 001160ec8c59 ("virtio-net: fix total qstat values") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18fbnic: Do not allow mailbox to toggle to ready outside fbnic_mbx_poll_tx_readyAlexander Duyck
[ Upstream commit ce2fa1dba204c761582674cf2eb9cbe0b949b5c7 ] We had originally thought to have the mailbox go to ready in the background while we were doing other things. One issue with this though is that we can't disable it by clearing the ready state without also blocking interrupts or calls to mbx_poll as it will just pop back to life during an interrupt. In order to prevent that from happening we can pull the code for toggling to ready out of the interrupt path and instead place it in the fbnic_mbx_poll_tx_ready path so that it becomes the only spot where the Rx/Tx can toggle to the ready state. By doing this we can prevent races where we disable the DMA and/or free buffers only to have an interrupt fire and undo what we have done. Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism") Signed-off-by: Alexander Duyck <alexanderduyck@fb.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/174654722518.499179.11612865740376848478.stgit@ahduyck-xeon-server.home.arpa Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18fbnic: Pull fbnic_fw_xmit_cap_msg use out of interrupt contextAlexander Duyck
[ Upstream commit 1b34d1c1dc8384884febd83140c9afbc7c4b9eb8 ] This change pulls the call to fbnic_fw_xmit_cap_msg out of fbnic_mbx_init_desc_ring and instead places it in the polling function for getting the Tx ready. Doing that we can avoid the potential issue with an interrupt coming in later from the firmware that causes it to get fired in interrupt context. Fixes: 20d2e88cc746 ("eth: fbnic: Add initial messaging to notify FW of our presence") Signed-off-by: Alexander Duyck <alexanderduyck@fb.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/174654721876.499179.9839651602256668493.stgit@ahduyck-xeon-server.home.arpa Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18fbnic: Improve responsiveness of fbnic_mbx_poll_tx_readyAlexander Duyck
[ Upstream commit ab064f6005973d456f95ae99cd9ea0d8ab676cce ] There were a couple different issues found in fbnic_mbx_poll_tx_ready. Among them were the fact that we were sleeping much longer than we actually needed to as the actual FW could respond in under 20ms. The other issue was that we would just keep polling the mailbox even if the device itself had gone away. To address the responsiveness issues we can decrease the sleeps to 20ms and use a jiffies based timeout value rather than just counting the number of times we slept and then polled. To address the hardware going away we can move the check for the firmware BAR being present from where it was and place it inside the loop after the mailbox descriptor ring is initialized and before we sleep so that we just abort and return an error if the device went away during initialization. With these two changes we see a significant improvement in boot times for the driver. Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism") Signed-off-by: Alexander Duyck <alexanderduyck@fb.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/174654721224.499179.2698616208976624755.stgit@ahduyck-xeon-server.home.arpa Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 05:47:32 +0000