summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-06Linux 6.1.23v6.1.23Greg Kroah-Hartman
Link: https://lore.kernel.org/r/20230403140415.090615502@linuxfoundation.org Tested-by: Markus Reichelt <lkt+2023@mareichelt.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Link: https://lore.kernel.org/r/20230404183150.381314754@linuxfoundation.org Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Link: https://lore.kernel.org/r/20230405100302.540890806@linuxfoundation.org Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Rudi Heitbaum <rudi@heitbaum.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Markus Reichelt <lkt+2023@mareichelt.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Tested-by: Allen Pais <apais@linux.microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06Revert "cpuidle, intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE *again*"Sasha Levin
This reverts commit 07fc78d8f0c960f7ca241de98bc8c6bfe7d200f3 which was upstream commit 6d9c7f51b1d9179bf7c3542267c656a934e8af23. Lockdep warnings on boot that are not seen with Linus's tree. Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-06x86/PVH: avoid 32-bit build warning when obtaining VGA console infoJan Beulich
commit aadbd07ff8a75ed342388846da78dfaddb8b106a upstream. In the commit referenced below I failed to pay attention to this code also being buildable as 32-bit. Adjust the type of "ret" - there's no real need for it to be wider than 32 bits. Fixes: 934ef33ee75c ("x86/PVH: obtain VGA console info in Dom0") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/2d2193ff-670b-0a27-e12d-2c5c4c121c79@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2023-04-06hsr: ratelimit only when errors are printedMatthieu Baerts
commit 1b0120e4db0bf2838d1ce741195ce4b7cc100b91 upstream. Recently, when automatically merging -net and net-next in MPTCP devel tree, our CI reported [1] a conflict in hsr, the same as the one reported by Stephen in netdev [2]. When looking at the conflict, I noticed it is in fact the v1 [3] that has been applied in -net and the v2 [4] in net-next. Maybe the v1 was applied by accident. As mentioned by Jakub Kicinski [5], the new condition makes more sense before the net_ratelimit(), not to update net_ratelimit's state which is unnecessary if we're not going to print either way. Here, this modification applies the v2 but in -net. Link: https://github.com/multipath-tcp/mptcp_net-next/actions/runs/4423171069 [1] Link: https://lore.kernel.org/netdev/20230315100914.53fc1760@canb.auug.org.au/ [2] Link: https://lore.kernel.org/netdev/20230307133229.127442-1-koverskeid@gmail.com/ [3] Link: https://lore.kernel.org/netdev/20230309092302.179586-1-koverskeid@gmail.com/ [4] Link: https://lore.kernel.org/netdev/20230308232001.2fb62013@kernel.org/ [5] Fixes: 28e8cabe80f3 ("net: hsr: Don't log netdev_err message on unknown prp dst node") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20230315-net-20230315-hsr_framereg-ratelimit-v1-1-61d2ef176d11@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06drm/amdkfd: Get prange->offset after svm_range_vram_node_newXiaogang Chen
commit 8eeddc0d4200762063e1c66b9cc63afa7b24ebf0 upstream. During miration to vram prange->offset is valid after vram buffer is located, either use old one or allocate a new one. Move svm_range_vram_node_new before migrate for each vma to get valid prange->offset. v2: squash in warning fix Fixes: b4ee9606378b ("drm/amdkfd: Fix BO offset for multi-VMA page migration") Signed-off-by: Xiaogang Chen <Xiaogang.Chen@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06usb: ucsi: Fix ucsi->connector raceHans de Goede
commit 0482c34ec6f8557e06cd0f8e2d0e20e8ede6a22c upstream. ucsi_init() which runs from a workqueue sets ucsi->connector and on an error will clear it again. ucsi->connector gets dereferenced by ucsi_resume(), this checks for ucsi->connector being NULL in case ucsi_init() has not finished yet; or in case ucsi_init() has failed. ucsi_init() setting ucsi->connector and then clearing it again on an error creates a race where the check in ucsi_resume() may pass, only to have ucsi->connector free-ed underneath it when ucsi_init() hits an error. Fix this race by making ucsi_init() store the connector array in a local variable and only assign it to ucsi->connector on success. Fixes: bdc62f2bae8f ("usb: typec: ucsi: Simplified registration and I/O API") Cc: stable@vger.kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230308154244.722337-3-hdegoede@redhat.com Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06libbpf: Fix btf_dump's packed struct determinationAndrii Nakryiko
[ Upstream commit 4fb877aaa179dcdb1676d55216482febaada457e ] Fix bug in btf_dump's logic of determining if a given struct type is packed or not. The notion of "natural alignment" is not needed and is even harmful in this case, so drop it altogether. The biggest difference in btf_is_struct_packed() compared to its original implementation is that we don't really use btf__align_of() to determine overall alignment of a struct type (because it could be 1 for both packed and non-packed struct, depending on specifci field definitions), and just use field's actual alignment to calculate whether any field is requiring packing or struct's size overall necessitates packing. Add two simple test cases that demonstrate the difference this change would make. Fixes: ea2ce1ba99aa ("libbpf: Fix BTF-to-C converter's padding logic") Reported-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20221215183605.4149488-1-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-06selftests/bpf: Add few corner cases to test padding handling of btf_dumpAndrii Nakryiko
[ Upstream commit b148c8b9b926e257a59c8eb2cd6fa3adfd443254 ] Add few hand-crafted cases and few randomized cases found using script from [0] that tests btf_dump's padding logic. [0] https://lore.kernel.org/bpf/85f83c333f5355c8ac026f835b18d15060725fcb.camel@ericsson.com/ Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20221212211505.558851-7-andrii@kernel.org Stable-dep-of: 4fb877aaa179 ("libbpf: Fix btf_dump's packed struct determination") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-06libbpf: Fix BTF-to-C converter's padding logicAndrii Nakryiko
[ Upstream commit ea2ce1ba99aa6a60c8d8a706e3abadf3de372163 ] Turns out that btf_dump API doesn't handle a bunch of tricky corner cases, as reported by Per, and further discovered using his testing Python script ([0]). This patch revamps btf_dump's padding logic significantly, making it more correct and also avoiding unnecessary explicit padding, where compiler would pad naturally. This overall topic turned out to be very tricky and subtle, there are lots of subtle corner cases. The comments in the code tries to give some clues, but comments themselves are supposed to be paired with good understanding of C alignment and padding rules. Plus some experimentation to figure out subtle things like whether `long :0;` means that struct is now forced to be long-aligned (no, it's not, turns out). Anyways, Per's script, while not completely correct in some known situations, doesn't show any obvious cases where this logic breaks, so this is a nice improvement over the previous state of this logic. Some selftests had to be adjusted to accommodate better use of natural alignment rules, eliminating some unnecessary padding, or changing it to `type: 0;` alignment markers. Note also that for when we are in between bitfields, we emit explicit bit size, while otherwise we use `: 0`, this feels much more natural in practice. Next patch will add few more test cases, found through randomized Per's script. [0] https://lore.kernel.org/bpf/85f83c333f5355c8ac026f835b18d15060725fcb.camel@ericsson.com/ Reported-by: Per Sundström XP <per.xp.sundstrom@ericsson.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20221212211505.558851-6-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-06selftests/bpf: Test btf dump for struct with padding only fieldsEduard Zingerman
[ Upstream commit d503f1176b14f722a40ea5110312614982f9a80b ] Structures with zero regular fields but some padding constitute a special case in btf_dump.c:btf_dump_emit_struct_def with regards to newline before closing '}'. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20221001104425.415768-2-eddyz87@gmail.com Stable-dep-of: ea2ce1ba99aa ("libbpf: Fix BTF-to-C converter's padding logic") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-06net: dsa: mv88e6xxx: replace VTU violation prints with trace pointsVladimir Oltean
commit 9e3d9ae52b5657399a7b61258cc7482434a911bb upstream. It is possible to trigger these VTU violation messages very easily, it's only necessary to send packets with an unknown VLAN ID to a port that belongs to a VLAN-aware bridge. Do a similar thing as for ATU violation messages, and hide them in the kernel's trace buffer. New usage model: $ trace-cmd list | grep mv88e6xxx mv88e6xxx mv88e6xxx:mv88e6xxx_vtu_miss_violation mv88e6xxx:mv88e6xxx_vtu_member_violation $ trace-cmd report Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06net: dsa: mv88e6xxx: replace ATU violation prints with trace pointsVladimir Oltean
commit 8646384d80f3d3b4a66b3284dbbd8232d1b8799e upstream. In applications where the switch ports must perform 802.1X based authentication and are therefore locked, ATU violation interrupts are quite to be expected as part of normal operation. The problem is that they currently spam the kernel log, even if rate limited. Create a series of trace points, all derived from the same event class, which log these violations to the kernel's trace buffer, which is both much faster and much easier to ignore than printing to a serial console. New usage model: $ trace-cmd list | grep mv88e6xxx mv88e6xxx mv88e6xxx:mv88e6xxx_atu_full_violation mv88e6xxx:mv88e6xxx_atu_miss_violation mv88e6xxx:mv88e6xxx_atu_member_violation $ trace-cmd record -e mv88e6xxx sleep 10 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06net: dsa: mv88e6xxx: read FID when handling ATU violationsHans J. Schultz
commit 4bf24ad09bc0b05e97fb48b962b2c9246fc76727 upstream. When an ATU violation occurs, the switch uses the ATU FID register to report the FID of the MAC address that incurred the violation. It would be good for the driver to know the FID value for purposes such as logging and CPU-based authentication. Up until now, the driver has been calling the mv88e6xxx_g1_atu_op() function to read ATU violations, but that doesn't do exactly what we want, namely it calls mv88e6xxx_g1_atu_fid_write() with FID 0. (side note, the documentation for the ATU Get/Clear Violation command says that writes to the ATU FID register have no effect before the operation starts, it's only that we disregard the value that this register provides once the operation completes) So mv88e6xxx_g1_atu_fid_write() is not what we want, but rather mv88e6xxx_g1_atu_fid_read(). However, the latter doesn't exist, we need to write it. The remainder of mv88e6xxx_g1_atu_op() except for mv88e6xxx_g1_atu_fid_write() is still needed, namely to send a GET_CLR_VIOLATION command to the ATU. In principle we could have still kept calling mv88e6xxx_g1_atu_op(), but the MDIO writes to the ATU FID register are pointless, but in the interest of doing less CPU work per interrupt, write a new function called mv88e6xxx_g1_read_atu_violation() and call it. The FID will be the port default FID as set by mv88e6xxx_port_set_fid() if the VID from the packet cannot be found in the VTU. Otherwise it is the FID derived from the VTU entry associated with that VID. Signed-off-by: Hans J. Schultz <netdev@kapio-technology.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06KVM: arm64: Disable interrupts while walking userspace PTsMarc Zyngier
commit e86fc1a3a3e9b4850fe74d738e3cfcf4297d8bba upstream. We walk the userspace PTs to discover what mapping size was used there. However, this can race against the userspace tables being freed, and we end-up in the weeds. Thankfully, the mm code is being generous and will IPI us when doing so. So let's implement our part of the bargain and disable interrupts around the walk. This ensures that nothing terrible happens during that time. We still need to handle the removal of the page tables before the walk. For that, allow get_user_mapping_size() to return an error, and make sure this error can be propagated all the way to the the exit handler. Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230316174546.3777507-2-maz@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06KVM: arm64: PMU: Fix GET_ONE_REG for vPMC regs to return the current valueReiji Watanabe
commit 9228b26194d1cc00449f12f306f53ef2e234a55b upstream. Have KVM_GET_ONE_REG for vPMU counter (vPMC) registers (PMCCNTR_EL0 and PMEVCNTR<n>_EL0) return the sum of the register value in the sysreg file and the current perf event counter value. Values of vPMC registers are saved in sysreg files on certain occasions. These saved values don't represent the current values of the vPMC registers if the perf events for the vPMCs count events after the save. The current values of those registers are the sum of the sysreg file value and the current perf event counter value. But, when userspace reads those registers (using KVM_GET_ONE_REG), KVM returns the sysreg file value to userspace (not the sum value). Fix this to return the sum value for KVM_GET_ONE_REG. Fixes: 051ff581ce70 ("arm64: KVM: Add access handler for event counter register") Cc: stable@vger.kernel.org Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Reiji Watanabe <reijiw@google.com> Link: https://lore.kernel.org/r/20230313033208.1475499-1-reijiw@google.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06drm/i915: Move CSC load back into .color_commit_arm() when PSR is enabled on ↵Ville Syrjälä
skl/glk commit a8e03e00b62073b494886dbff32f8b5338066c8b upstream. SKL/GLK CSC unit suffers from a nasty issue where a CSC coeff/offset register read or write between DC5 exit and PSR exit will undo the CSC arming performed by DMC, and then during PSR exit the hardware will latch zeroes into the active CSC registers. This causes any plane going through the CSC to output all black. We can sidestep the issue by making sure the PSR exit has already actually happened before we touch the CSC coeff/offset registers. Easiest way to guarantee that is to just move the CSC programming back into the .color_commir_arm() as we force a PSR exit (and crucially wait for it to actually happen) prior to touching the arming registers. When PSR (and thus also DC states) are disabled we don't have anything to worry about, so we can keep using the more optional _noarm() hook for writing the CSC registers. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8283 Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-3-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 80a892a4c2428b65366721599fc5fe50eaed35fd) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06drm/i915: Disable DC states for all commitsVille Syrjälä
commit a2b6e99d8a623544f3bdccd28ee35b9c1b00daa5 upstream. Keeping DC states enabled is incompatible with the _noarm()/_arm() split we use for writing pipe/plane registers. When DC5 and PSR are enabled, all pipe/plane registers effectively become self-arming on account of DC5 exit arming the update, and PSR exit latching it. What probably saves us most of the time is that (with PIPE_MISC[21]=0) all pipe register writes themselves trigger PSR exit, and then we don't re-enter PSR until the idle frame count has elapsed. So it may be that the PSR exit happens already before we've updated the state too much. Also the PSR1 panel (at least on this KBL) seems to discard the first frame we trasmit, presumably still scanning out from its internal framebuffer at that point. So only the second frame we transmit is actually visible. But I suppose that could also be panel specific behaviour. I haven't checked out how other PSR panels behave, nor did I bother to check what the eDP spec has to say about this. And since this really is all about DC states, let's switch from the MODESET domain to the DC_OFF domain. Functionally they are 100% identical. We should probably remove the MODESET domain... And for good measure let's toss in an assert to the place where we do the _noarm() register writes to make sure DC states are in fact off. v2: Just use intel_display_power_is_enabled() (Imre) Cc: <stable@vger.kernel.org> #v5.17+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair") Fixes: f8a005eb8972 ("drm/i915: Optimize icl+ universal plane programming") Fixes: 890b6ec4a522 ("drm/i915: Split skl+ plane update into noarm+arm pair") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320183532.17727-1-ville.syrjala@linux.intel.com (cherry picked from commit 41b4c7fe72b6105a4b49395eea9aa40cef94288d) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06drm/i915/dpt: Treat the DPT BO as a framebufferVille Syrjälä
commit 3413881e1ecc3cba722a2e87ec099692eed5be28 upstream. Currently i915_gem_object_is_framebuffer() doesn't treat the BO containing the framebuffer's DPT as a framebuffer itself. This means eg. that the shrinker can evict the DPT BO while leaving the actual FB BO bound, when the DPT is allocated from regular shmem. That causes an immediate oops during hibernate as we try to rewrite the PTEs inside the already evicted DPT obj. TODO: presumably this might also be the reason for the DPT related display faults under heavy memory pressure, but I'm still not sure how that would happen as the object should be pinned by intel_dpt_pin() while in active use by the display engine... Cc: stable@vger.kernel.org Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Imre Deak <imre.deak@intel.com> Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-2-ville.syrjala@linux.intel.com Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> (cherry picked from commit 779cb5ba64ec7df80675a956c9022929514f517a) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06drm/i915/gem: Flush lmem contents after constructionChris Wilson
commit d032ca43f2c80049ce5aabd3f208dc3849359497 upstream. i915_gem_object_create_lmem_from_data() lacks the flush of the data written to lmem to ensure the object is marked as dirty and the writes flushed to the backing store. Once created, we can immediately release the obj->mm.mapping caching of the vmap. Fixes: 7acbbc7cf485 ("drm/i915/guc: put all guc objects in lmem when available") Cc: Matthew Auld <matthew.auld@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.16+ Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316165918.13074-1-nirmoy.das@intel.com (cherry picked from commit e2ee10474ce766686e7a7496585cdfaf79e3a1bf) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06drm/amd/display: Take FEC Overhead into Timeslot CalculationFangzhi Zuo
commit 68dc1846c3a44d5e633be145c169ce2fd5420695 upstream. 8b/10b encoding needs to add 3% fec overhead into the pbn. In the Synapcis Cascaded MST hub, the first stage MST branch device needs the information to determine the timeslot count for the second stage MST branch device. Missing this overhead will leads to insufficient timeslot allocation. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06drm/amd/display: Add DSC Support for Synaptics Cascaded MST HubFangzhi Zuo
commit f4f3b7dedbe849e780c779ba67365bb1db0d8637 upstream. Traditional synaptics hub has one MST branch device without virtual dpcd. Synaptics cascaded hub has two chained MST branch devices. DSC decoding is performed via root MST branch device, instead of the second MST branch device. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06drm/amdgpu: allow more APUs to do mode2 reset when go to S4Tim Huang
commit 2fec9dc8e0acc3dfb56d1389151bcf405f087b10 upstream. Skip mode2 reset only for IMU enabled APUs when do S4. This patch is to fix the regression issue https://gitlab.freedesktop.org/drm/amd/-/issues/2483 It is generated by commit b589626674de ("drm/amdgpu: skip ASIC reset for APUs when go to S4"). Fixes: b589626674de ("drm/amdgpu: skip ASIC reset for APUs when go to S4") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2483 Tested-by: Yuan Perry <Perry.Yuan@amd.com> Signed-off-by: Tim Huang <tim.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06drm/etnaviv: fix reference leak when mmaping imported bufferLucas Stach
commit 963b2e8c428f79489ceeb058e8314554ec9cbe6f upstream. drm_gem_prime_mmap() takes a reference on the GEM object, but before that drm_gem_mmap_obj() already takes a reference, which will be leaked as only one reference is dropped when the mapping is closed. Drop the extra reference when dma_buf_mmap() succeeds. Cc: stable@vger.kernel.org Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06s390: reintroduce expoline dependence to scriptsJiri Slaby (SUSE)
commit 7bb2107e63d8a4a13bbb6fe0e1cbd68784a2e9ac upstream. Expolines depend on scripts/basic/fixdep. And build of expolines can now race with the fixdep build: make[1]: *** Deleting file 'arch/s390/lib/expoline/expoline.o' /bin/sh: line 1: scripts/basic/fixdep: Permission denied make[1]: *** [../scripts/Makefile.build:385: arch/s390/lib/expoline/expoline.o] Error 126 make: *** [../arch/s390/Makefile:166: expoline_prepare] Error 2 The dependence was removed in the below Fixes: commit. So reintroduce the dependence on scripts. Fixes: a0b0987a7811 ("s390/nospec: remove unneeded header includes") Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: stable@vger.kernel.org Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230316112809.7903-1-jirislaby@kernel.org Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06s390/uaccess: add missing earlyclobber annotations to __clear_user()Heiko Carstens
commit 89aba4c26fae4e459f755a18912845c348ee48f3 upstream. Add missing earlyclobber annotation to size, to, and tmp2 operands of the __clear_user() inline assembly since they are modified or written to before the last usage of all input operands. This can lead to incorrect register allocation for the inline assembly. Fixes: 6c2a9e6df604 ("[S390] Use alternative user-copy operations for new hardware.") Reported-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/all/20230321122514.1743889-3-mark.rutland@arm.com/ Cc: stable@vger.kernel.org Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06dt-bindings: mtd: jedec,spi-nor: Document CPOL/CPHA supportGeert Uytterhoeven
commit a56cde41340ac4049fa6edac9e6cfbcd2804074e upstream. SPI EEPROMs typically support both SPI Mode 0 (CPOL=CPHA=0) and Mode 3 (CPOL=CPHA=1). However, using the latter is currently flagged as an error by "make dtbs_check", e.g.: arch/arm/boot/dts/r8a7791-koelsch.dtb: flash@0: Unevaluated properties are not allowed ('spi-cpha', 'spi-cpol' were unexpected) From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml Fix this by documenting support for CPOL=CPHA=1. Fixes: 233363aba72ac638 ("spi/panel: dt-bindings: drop CPHA and CPOL from common properties") Cc: stable@vger.kernel.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/afe470603028db9374930b0c57464b1f6d52bdd3.1676384304.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06rcu: Fix rcu_torture_read ftrace eventDouglas Raillard
commit d18a04157fc171fd48075e3dc96471bd3b87f0dd upstream. Fix the rcutorturename field so that its size is correctly reported in the text format embedded in trace.dat files. As it stands, it is reported as being of size 1: field:char rcutorturename[8]; offset:8; size:1; signed:0; Signed-off-by: Douglas Raillard <douglas.raillard@arm.com> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Cc: stable@vger.kernel.org Fixes: 04ae87a52074e ("ftrace: Rework event_create_dir()") Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> [ boqun: Add "Cc" and "Fixes" tags per Steven ] Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06xtensa: fix KASAN report for show_stackMax Filippov
commit 1d3b7a788ca7435156809a6bd5b20c95b2370d45 upstream. show_stack dumps raw stack contents which may trigger an unnecessary KASAN report. Fix it by copying stack contents to a temporary buffer with __memcpy and then printing that buffer instead of passing stack pointer directly to the print_hex_dump. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06ALSA: hda/realtek: Add quirk for Lenovo ZhaoYang CF4620Zhuangwenhui
commit 52aad39385e1bfdb34a1b405f699a8ef302c58b0 upstream. Fix headset microphone detection on Lenovo ZhaoYang CF4620Z. [ adjusted to be applicable to the latest tree -- tiwai ] Signed-off-by: huangwenhui <huangwenhuia@uniontech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230328074644.30142-1-huangwenhuia@uniontech.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06ALSA: hda/realtek: Add quirks for some Clevo laptopsTim Crawford
commit b7a5822810c4398515300d614d988cf638adecad upstream. Add the audio quirk for some of Clevo's latest RPL laptops: - NP50RNJS (ALC256) - NP70SNE (ALC256) - PD50SNE (ALC1220) - PE60RNE (ALC1220) Co-authored-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230317141825.11807-1-tcrawford@system76.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06ALSA: usb-audio: Fix regression on detection of Roland VS-100Takashi Iwai
commit fa4e7a6fa12b1132340785e14bd439cbe95b7a5a upstream. It's been reported that the recent kernel can't probe the PCM devices on Roland VS-100 properly, and it turned out to be a regression by the recent addition of the bit shift range check for the format bits. In the old code, we just did bit-shift and it resulted in zero, which is then corrected to the standard PCM format, while the new code explicitly returns an error in such a case. For addressing the regression, relax the check and fallback to the standard PCM type (with the info output). Fixes: 43d5ca88dfcd ("ALSA: usb-audio: Fix potential out-of-bounds shift") Cc: <stable@vger.kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217084 Link: https://lore.kernel.org/r/20230324075005.19403-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06ALSA: hda/conexant: Partial revert of a quirk for LenovoTakashi Iwai
commit b871cb971c683f7f212e7ca3c9a6709a75785116 upstream. The recent commit f83bb2592482 ("ALSA: hda/conexant: Add quirk for LENOVO 20149 Notebook model") introduced a quirk for the device with 17aa:3977, but this caused a regression on another model (Lenovo Ideadpad U31) with the very same PCI SSID. And, through skimming over the net, it seems that this PCI SSID is used for multiple different models, so it's no good idea to apply the quirk with the SSID. Although we may take a different ID check (e.g. the codec SSID instead of the PCI SSID), unfortunately, the original patch author couldn't identify the hardware details any longer as the machine was returned, and we can't develop the further proper fix. In this patch, instead, we partially revert the change so that the quirk won't be applied as default for addressing the regression. Meanwhile, the quirk function itself is kept, and it's now made to be applicable via the explicit model=lenovo-20149 option. Fixes: f83bb2592482 ("ALSA: hda/conexant: Add quirk for LENOVO 20149 Notebook model") Reported-by: Jetro Jormalainen <jje-lxkl@jetro.fi> Link: https://lore.kernel.org/r/20230308215009.4d3e58a6@mopti Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230320140954.31154-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06NFSv4: Fix hangs when recovering open state after a server rebootTrond Myklebust
commit 6165a16a5ad9b237bb3131cff4d3c601ccb8f9a3 upstream. When we're using a cached open stateid or a delegation in order to avoid sending a CLAIM_PREVIOUS open RPC call to the server, we don't have a new open stateid to present to update_open_stateid(). Instead rely on nfs4_try_open_cached(), just as if we were doing a normal open. Fixes: d2bfda2e7aa0 ("NFSv4: don't reprocess cached open CLAIM_PREVIOUS") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06powerpc/64s: Fix __pte_needs_flush() false positive warningBenjamin Gray
commit 1abce0580b89464546ae06abd5891ebec43c9470 upstream. Userspace PROT_NONE ptes set _PAGE_PRIVILEGED, triggering a false positive debug assertion that __pte_flags_need_flush() is not called on a kernel mapping. Detect when it is a userspace PROT_NONE page by checking the required bits of PAGE_NONE are set, and none of the RWX bits are set. pte_protnone() is insufficient here because it always returns 0 when CONFIG_NUMA_BALANCING=n. Fixes: b11931e9adc1 ("powerpc/64s: add pte_needs_flush and huge_pmd_needs_flush") Cc: stable@vger.kernel.org # v6.1+ Reported-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230302225947.81083-1-bgray@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06powerpc/pseries/vas: Ignore VAS update for DLPAR if copy/paste is not enabledHaren Myneni
commit eca9f6e6f83b6725b84e1c76fdde19b003cff0eb upstream. The hypervisor supports user-mode NX from Power10. pseries_vas_dlpar_cpu() is called from lparcfg_write() to update VAS windows for DLPAR event in shared processor mode and the kernel gets -ENOTSUPP for HCALLs if the user-mode NX is not supported. The current VAS implementation also supports only with Radix page tables. Whereas in dedicated processor mode, pseries_vas_notifier() is registered only if the copy/paste feature is enabled. So instead of displaying HCALL error messages, update VAS capabilities if the copy/paste feature is available. This patch ignores updating VAS capabilities in pseries_vas_dlpar_cpu() and returns success if the copy/paste feature is not enabled. Then lparcfg_write() completes the processor DLPAR operations without any failures. Fixes: 2147783d6bf0 ("powerpc/pseries: Use lparcfg to reconfig VAS windows for DLPAR CPU") Cc: stable@vger.kernel.org # v6.1+ Signed-off-by: Haren Myneni <haren@linux.ibm.com> Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/1d0e727e7dbd9a28627ef08ca9df9c86a50175e2.camel@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06powerpc: Don't try to copy PPR for task with NULL pt_regsJens Axboe
commit fd7276189450110ed835eb0a334e62d2f1c4e3be upstream. powerpc sets up PF_KTHREAD and PF_IO_WORKER with a NULL pt_regs, which from my (arguably very short) checking is not commonly done for other archs. This is fine, except when PF_IO_WORKER's have been created and the task does something that causes a coredump to be generated. Then we get this crash: Kernel attempted to read user page (160) - exploit attempt? (uid: 1000) BUG: Kernel NULL pointer dereference on read at 0x00000160 Faulting instruction address: 0xc0000000000c3a60 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=32 NUMA pSeries Modules linked in: bochs drm_vram_helper drm_kms_helper xts binfmt_misc ecb ctr syscopyarea sysfillrect cbc sysimgblt drm_ttm_helper aes_generic ttm sg libaes evdev joydev virtio_balloon vmx_crypto gf128mul drm dm_mod fuse loop configfs drm_panel_orientation_quirks ip_tables x_tables autofs4 hid_generic usbhid hid xhci_pci xhci_hcd usbcore usb_common sd_mod CPU: 1 PID: 1982 Comm: ppc-crash Not tainted 6.3.0-rc2+ #88 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries NIP: c0000000000c3a60 LR: c000000000039944 CTR: c0000000000398e0 REGS: c0000000041833b0 TRAP: 0300 Not tainted (6.3.0-rc2+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 88082828 XER: 200400f8 ... NIP memcpy_power7+0x200/0x7d0 LR ppr_get+0x64/0xb0 Call Trace: ppr_get+0x40/0xb0 (unreliable) __regset_get+0x180/0x1f0 regset_get_alloc+0x64/0x90 elf_core_dump+0xb98/0x1b60 do_coredump+0x1c34/0x24a0 get_signal+0x71c/0x1410 do_notify_resume+0x140/0x6f0 interrupt_exit_user_prepare_main+0x29c/0x320 interrupt_exit_user_prepare+0x6c/0xa0 interrupt_return_srr_user+0x8/0x138 Because ppr_get() is trying to copy from a PF_IO_WORKER with a NULL pt_regs. Check for a valid pt_regs in both ppc_get/ppr_set, and return an error if not set. The actual error value doesn't seem to be important here, so just pick -EINVAL. Fixes: fa439810cc1b ("powerpc/ptrace: Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Jens Axboe <axboe@kernel.dk> [mpe: Trim oops in change log, add Fixes & Cc stable] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/d9f63344-fe7c-56ae-b420-4a1a04a2ae4c@kernel.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06platform/x86: ideapad-laptop: Stop sending KEY_TOUCHPAD_TOGGLEHans de Goede
commit e3271a5917d1501089b1a224d702aa053e2877f4 upstream. Commit 5829f8a897e4 ("platform/x86: ideapad-laptop: Send KEY_TOUCHPAD_TOGGLE on some models") made ideapad-laptop send KEY_TOUCHPAD_TOGGLE when we receive an ACPI notify with VPC event bit 5 set and the touchpad-state has not been changed by the EC itself already. This was done under the assumption that this would be good to do to make the touchpad-toggle hotkey work on newer models where the EC does not toggle the touchpad on/off itself (because it is not routed through the PS/2 controller, but uses I2C). But it turns out that at least some models, e.g. the Yoga 7-15ITL5 the EC triggers an ACPI notify with VPC event bit 5 set on resume, which would now cause a spurious KEY_TOUCHPAD_TOGGLE on resume to which the desktop environment responds by disabling the touchpad in software, breaking the touchpad (until manually re-enabled) on resume. It was never confirmed that sending KEY_TOUCHPAD_TOGGLE actually improves things on new models and at least some new models like the Yoga 7-15ITL5 don't have a touchpad on/off toggle hotkey at all, while still sending ACPI notify events with VPC event bit 5 set. So it seems best to revert the change to send KEY_TOUCHPAD_TOGGLE when receiving an ACPI notify events with VPC event bit 5 and the touchpad state as reported by the EC has not changed. Note this is not a full revert the code to cache the last EC touchpad state is kept to avoid sending spurious KEY_TOUCHPAD_ON / _OFF events on resume. Fixes: 5829f8a897e4 ("platform/x86: ideapad-laptop: Send KEY_TOUCHPAD_TOGGLE on some models") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217234 Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230330194644.64628-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06pinctrl: at91-pio4: fix domain name assignmentJohan Hovold
commit 7bb97e360acdd38b68ad0a1defb89c6e89c85596 upstream. Since commit d59f6617eef0 ("genirq: Allow fwnode to carry name information only") an IRQ domain is always given a name during allocation (e.g. used for the debugfs entry). Drop the no longer valid name assignment, which would lead to an attempt to free a string constant when removing the domain on late probe failures (e.g. probe deferral). Fixes: d59f6617eef0 ("genirq: Allow fwnode to carry name information only") Cc: stable@vger.kernel.org # 4.13 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> # on SAMA7G5 Link: https://lore.kernel.org/r/20230224130828.27985-1-johan+linaro@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06pinctrl: amd: Disable and mask interrupts on resumeKornel Dulęba
commit b26cd9325be4c1fcd331b77f10acb627c560d4d7 upstream. This fixes a similar problem to the one observed in: commit 4e5a04be88fe ("pinctrl: amd: disable and mask interrupts on probe"). On some systems, during suspend/resume cycle firmware leaves an interrupt enabled on a pin that is not used by the kernel. This confuses the AMD pinctrl driver and causes spurious interrupts. The driver already has logic to detect if a pin is used by the kernel. Leverage it to re-initialize interrupt fields of a pin only if it's not used by us. Cc: stable@vger.kernel.org Fixes: dbad75dd1f25 ("pinctrl: add AMD GPIO driver support.") Signed-off-by: Kornel Dulęba <korneld@chromium.org> Link: https://lore.kernel.org/r/20230320093259.845178-1-korneld@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06modpost: Fix processing of CRCs on 32-bit build machinesBen Hutchings
commit fb27e70f6e408dee5d22b083e7a38a59e6118253 upstream. modpost now reads CRCs from .*.cmd files, parsing them using strtol(). This is inconsistent with its parsing of Module.symvers and with their definition as *unsigned* 32-bit values. strtol() clamps values to [LONG_MIN, LONG_MAX], and when building on a 32-bit system this changes all CRCs >= 0x80000000 to be 0x7fffffff. Change extract_crcs_for_object() to use strtoul() instead. Cc: stable@vger.kernel.org Fixes: f292d875d0dc ("modpost: extract symbol versions from *.cmd files") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06net: phy: dp83869: fix default value for tx-/rx-internal-delayJosua Mayer
commit 82e2c39f9ef78896e9b634dfd82dc042e6956bb7 upstream. dp83869 internally uses a look-up table for mapping supported delays in nanoseconds to register values. When specific delays are defined in device-tree, phy_get_internal_delay does the lookup automatically returning an index. The default case wrongly assigns the nanoseconds value from the lookup table, resulting in numeric value 2000 applied to delay configuration register, rather than the expected index values 0-7 (7 for 2000). Ultimately this issue broke RX for 1Gbps links. Fix default delay configuration by assigning the intended index value directly. Cc: stable@vger.kernel.org Fixes: 736b25afe284 ("net: dp83869: Add RGMII internal delay configuration") Co-developed-by: Yazan Shhady <yazan.shhady@solid-run.com> Signed-off-by: Yazan Shhady <yazan.shhady@solid-run.com> Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230323102536.31988-1-josua@solid-run.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06xen/netback: don't do grant copy across page boundaryJuergen Gross
commit 05310f31ca74673a96567fb14637b7d5d6c82ea5 upstream. Fix xenvif_get_requests() not to do grant copy operations across local page boundaries. This requires to double the maximum number of copy operations per queue, as each copy could now be split into 2. Make sure that struct xenvif_tx_cb doesn't grow too large. Cc: stable@vger.kernel.org Fixes: ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06can: j1939: prevent deadlock by moving j1939_sk_errqueue()Oleksij Rempel
commit d1366b283d94ac4537a4b3a1e8668da4df7ce7e9 upstream. This commit addresses a deadlock situation that can occur in certain scenarios, such as when running data TP/ETP transfer and subscribing to the error queue while receiving a net down event. The deadlock involves locks in the following order: 3 j1939_session_list_lock -> active_session_list_lock j1939_session_activate ... j1939_sk_queue_activate_next -> sk_session_queue_lock ... j1939_xtp_rx_eoma_one 2 j1939_sk_queue_drop_all -> sk_session_queue_lock ... j1939_sk_netdev_event_netdown -> j1939_socks_lock j1939_netdev_notify 1 j1939_sk_errqueue -> j1939_socks_lock __j1939_session_cancel -> active_session_list_lock j1939_tp_rxtimer CPU0 CPU1 ---- ---- lock(&priv->active_session_list_lock); lock(&jsk->sk_session_queue_lock); lock(&priv->active_session_list_lock); lock(&priv->j1939_socks_lock); The solution implemented in this commit is to move the j1939_sk_errqueue() call out of the active_session_list_lock context, thus preventing the deadlock situation. Reported-by: syzbot+ee1cd780f69483a8616b@syzkaller.appspotmail.com Fixes: 5b9272e93f2e ("can: j1939: extend UAPI to notify about RX status") Co-developed-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20230324130141.2132787-1-o.rempel@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06dm: fix __send_duplicate_bios() to always allow for splitting IOMike Snitzer
commit 666eed46769d929c3e13636134ecfc67d75ef548 upstream. Commit 7dd76d1feec70 ("dm: improve bio splitting and associated IO accounting") only called setup_split_accounting() from __send_duplicate_bios() if a single bio were being issued. But the case where duplicate bios are issued must call it too. Otherwise the bio won't be split and resubmitted (via recursion through block core back to DM) to submit the later portions of a bio (which may map to an entirely different target). For example, when discarding an entire DM striped device with the following DM table: vg-lvol0: 0 159744 striped 2 128 7:0 2048 7:1 2048 vg-lvol0: 159744 45056 striped 2 128 7:2 2048 7:3 2048 Before (broken, discards the first striped target's devices twice): device-mapper: striped: target_stripe=0, bdev=7:0, start=2048 len=79872 device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=79872 device-mapper: striped: target_stripe=0, bdev=7:0, start=2049 len=22528 device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=22528 After (works as expected): device-mapper: striped: target_stripe=0, bdev=7:0, start=2048 len=79872 device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=79872 device-mapper: striped: target_stripe=0, bdev=7:2, start=2048 len=22528 device-mapper: striped: target_stripe=1, bdev=7:3, start=2048 len=22528 Fixes: 7dd76d1feec70 ("dm: improve bio splitting and associated IO accounting") Cc: stable@vger.kernel.org Reported-by: Orange Kao <orange@aiven.io> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06zonefs: Always invalidate last cached page on append writeDamien Le Moal
commit c1976bd8f23016d8706973908f2bb0ac0d852a8f upstream. When a direct append write is executed, the append offset may correspond to the last page of a sequential file inode which might have been cached already by buffered reads, page faults with mmap-read or non-direct readahead. To ensure that the on-disk and cached data is consistant for such last cached page, make sure to always invalidate it in zonefs_file_dio_append(). If the invalidation fails, return -EBUSY to userspace to differentiate from IO errors. This invalidation will always be a no-op when the FS block size (device zone write granularity) is equal to the page size (e.g. 4K). Reported-by: Hans Holmberg <Hans.Holmberg@wdc.com> Fixes: 02ef12a663c7 ("zonefs: use REQ_OP_ZONE_APPEND for sync DIO") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06vmxnet3: use gro callback when UPT is enabledRonak Doshi
commit 3bced313b9a5a237c347e0f079c8c2fe4b3935aa upstream. Currently, vmxnet3 uses GRO callback only if LRO is disabled. However, on smartNic based setups where UPT is supported, LRO can be enabled from guest VM but UPT devicve does not support LRO as of now. In such cases, there can be performance degradation as GRO is not being done. This patch fixes this issue by calling GRO API when UPT is enabled. We use updateRxProd to determine if UPT mode is active or not. To clarify few things discussed over the thread: The patch is not neglecting any feature bits nor disabling GRO. It uses GRO callback when UPT is active as LRO is not available in UPT. GRO callback cannot be used as default for all cases as it degrades performance for non-UPT cases or for cases when LRO is already done in ESXi. Cc: stable@vger.kernel.org Fixes: 6f91f4ba046e ("vmxnet3: add support for capability registers") Signed-off-by: Ronak Doshi <doshir@vmware.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230323200721.27622-1-doshir@vmware.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06io_uring: fix poll/netmsg alloc cachesPavel Begunkov
commit fd30d1cdcc4ff405fc54765edf2e11b03f2ed4f3 upstream. We increase cache->nr_cached when we free into the cache but don't decrease when we take from it, so in some time we'll get an empty cache with cache->nr_cached larger than IO_ALLOC_CACHE_MAX, that fails io_alloc_cache_put() and effectively disables caching. Fixes: 9b797a37c4bd8 ("io_uring: add abstraction around apoll cache") Cc: stable@vger.kernel.org Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06io_uring/rsrc: fix rogue rsrc node grabbingPavel Begunkov
commit 4ff0b50de8cabba055efe50bbcb7506c41a69835 upstream. We should not be looking at ctx->rsrc_node and anyhow modifying the node without holding uring_lock, grabbing references in such a way is not safe either. Cc: stable@vger.kernel.org Fixes: 5106dd6e74ab6 ("io_uring: propagate issue_flags state down to file assignment") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/1202ede2d7bb90136e3482b2b84aad9ed483e5d6.1680098433.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06io_uring/poll: clear single/double poll flags on poll armingJens Axboe
commit 005308f7bdacf5685ed1a431244a183dbbb9e0e8 upstream. Unless we have at least one entry queued, then don't call into io_poll_remove_entries(). Normally this isn't possible, but if we retry poll then we can have ->nr_entries cleared again as we're setting it up. If this happens for a poll retry, then we'll still have at least REQ_F_SINGLE_POLL set. io_poll_remove_entries() then thinks it has entries to remove. Clear REQ_F_SINGLE_POLL and REQ_F_DOUBLE_POLL unconditionally when arming a poll request. Fixes: c16bda37594f ("io_uring/poll: allow some retries for poll triggering spuriously") Cc: stable@vger.kernel.org Reported-by: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06block/io_uring: pass in issue_flags for uring_cmd task_work handlingJens Axboe
commit 9d2789ac9d60c049d26ef6d3005d9c94c5a559e9 upstream. io_uring_cmd_done() currently assumes that the uring_lock is held when invoked, and while it generally is, this is not guaranteed. Pass in the issue_flags associated with it, so that we have IO_URING_F_UNLOCKED available to be able to lock the CQ ring appropriately when completing events. Cc: stable@vger.kernel.org Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd") Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-07 01:10:52 +0000