summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-09-12ice: Add netif_device_attach/detach into PF reset flowDawid Osuchowski
[ Upstream commit d11a67634227f9f9da51938af085fb41a733848f ] Ethtool callbacks can be executed while reset is in progress and try to access deleted resources, e.g. getting coalesce settings can result in a NULL pointer dereference seen below. Reproduction steps: Once the driver is fully initialized, trigger reset: # echo 1 > /sys/class/net/<interface>/device/reset when reset is in progress try to get coalesce settings using ethtool: # ethtool -c <interface> BUG: kernel NULL pointer dereference, address: 0000000000000020 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 11 PID: 19713 Comm: ethtool Tainted: G S 6.10.0-rc7+ #7 RIP: 0010:ice_get_q_coalesce+0x2e/0xa0 [ice] RSP: 0018:ffffbab1e9bcf6a8 EFLAGS: 00010206 RAX: 000000000000000c RBX: ffff94512305b028 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9451c3f2e588 RDI: ffff9451c3f2e588 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff9451c3f2e580 R11: 000000000000001f R12: ffff945121fa9000 R13: ffffbab1e9bcf760 R14: 0000000000000013 R15: ffffffff9e65dd40 FS: 00007faee5fbe740(0000) GS:ffff94546fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000020 CR3: 0000000106c2e005 CR4: 00000000001706f0 Call Trace: <TASK> ice_get_coalesce+0x17/0x30 [ice] coalesce_prepare_data+0x61/0x80 ethnl_default_doit+0xde/0x340 genl_family_rcv_msg_doit+0xf2/0x150 genl_rcv_msg+0x1b3/0x2c0 netlink_rcv_skb+0x5b/0x110 genl_rcv+0x28/0x40 netlink_unicast+0x19c/0x290 netlink_sendmsg+0x222/0x490 __sys_sendto+0x1df/0x1f0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x82/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7faee60d8e27 Calling netif_device_detach() before reset makes the net core not call the driver when ethtool command is issued, the attempt to execute an ethtool command during reset will result in the following message: netlink error: No such device instead of NULL pointer dereference. Once reset is done and ice_rebuild() is executing, the netif_device_attach() is called to allow for ethtool operations to occur again in a safe manner. Fixes: fcea6f3da546 ("ice: Add stats and ethtool support") Suggested-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com> Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12igb: Fix not clearing TimeSync interrupts for 82580Daiwei Li
[ Upstream commit ba8cf80724dbc09825b52498e4efacb563935408 ] 82580 NICs have a hardware bug that makes it necessary to write into the TSICR (TimeSync Interrupt Cause) register to clear it: https://lore.kernel.org/all/CDCB8BE0.1EC2C%25matthew.vick@intel.com/ Add a conditional so only for 82580 we write into the TSICR register, so we don't risk losing events for other models. Without this change, when running ptp4l with an Intel 82580 card, I get the following output: > timed out while polling for tx timestamp increasing tx_timestamp_timeout or > increasing kworker priority may correct this issue, but a driver bug likely > causes it This goes away with this change. This (partially) reverts commit ee14cc9ea19b ("igb: Fix missing time sync events"). Fixes: ee14cc9ea19b ("igb: Fix missing time sync events") Closes: https://lore.kernel.org/intel-wired-lan/CAN0jFd1kO0MMtOh8N2Ztxn6f7vvDKp2h507sMryobkBKe=xk=w@mail.gmail.com/ Tested-by: Daiwei Li <daiweili@google.com> Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Daiwei Li <daiweili@google.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12cifs: Fix FALLOC_FL_ZERO_RANGE to preflush buffered part of target regionDavid Howells
[ Upstream commit 91d1dfae464987aaf6c79ff51d8674880fb3be77 ] Under certain conditions, the range to be cleared by FALLOC_FL_ZERO_RANGE may only be buffered locally and not yet have been flushed to the server. For example: xfs_io -f -t -c "pwrite -S 0x41 0 4k" \ -c "pwrite -S 0x42 4k 4k" \ -c "fzero 0 4k" \ -c "pread -v 0 8k" /xfstest.test/foo will write two 4KiB blocks of data, which get buffered in the pagecache, and then fallocate() is used to clear the first 4KiB block on the server - but we don't flush the data first, which means the EOF position on the server is wrong, and so the FSCTL_SET_ZERO_DATA RPC fails (and xfs_io ignores the error), but then when we try to read it, we see the old data. Fix this by preflushing any part of the target region that above the server's idea of the EOF position to force the server to update its EOF position. Note, however, that we don't want to simply expand the file by moving the EOF before doing the FSCTL_SET_ZERO_DATA[*] because someone else might see the zeroed region or if the RPC fails we then have to try to clean it up or risk getting corruption. [*] And we have to move the EOF first otherwise FSCTL_SET_ZERO_DATA won't do what we want. This fixes the generic/008 xfstest. [!] Note: A better way to do this might be to split the operation into two parts: we only do FSCTL_SET_ZERO_DATA for the part of the range below the server's EOF and then, if that worked, invalidate the buffered pages for the part above the range. Fixes: 6b69040247e1 ("cifs/smb3: Fix data inconsistent when zero file range") Signed-off-by: David Howells <dhowells@redhat.com> cc: Steve French <stfrench@microsoft.com> cc: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> cc: Pavel Shilovsky <pshilov@microsoft.com> cc: Paulo Alcantara <pc@manguebit.com> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: linux-mm@kvack.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12rust: kbuild: fix export of bss symbolsAndreas Hindborg
[ Upstream commit b8673d56935c32a4e0a1a0b40951fdd313dbf340 ] Symbols in the bss segment are not currently exported. This is a problem for Rust modules that link against statics, that are resident in the kernel image. Thus export symbols in the bss segment. Fixes: 2f7ab1267dc9 ("Kbuild: add Rust support") Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Tested-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240815074519.2684107-2-nmi@metaspace.dk [ Reworded slightly. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12rust: Use awk instead of recent xargsMatthew Maurer
[ Upstream commit 45f97e6385cad6d0e48a27ddcd08793bb4d35851 ] `awk` is already required by the kernel build, and the `xargs` feature used in current Rust detection is not present in all `xargs` (notably, toybox based xargs, used in the Android kernel build). Signed-off-by: Matthew Maurer <mmaurer@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Tested-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Link: https://lore.kernel.org/r/20230928205045.2375899-1-mmaurer@google.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Stable-dep-of: b8673d56935c ("rust: kbuild: fix export of bss symbols") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12can: mcp251xfd: fix ring configuration when switching from CAN-CC to CAN-FD modeMarc Kleine-Budde
[ Upstream commit 50ea5449c56310d2d31c28ba91a59232116d3c1e ] If the ring (rx, tx) and/or coalescing parameters (rx-frames-irq, tx-frames-irq) have been configured while the interface was in CAN-CC mode, but the interface is brought up in CAN-FD mode, the ring parameters might be too big. Use the default CAN-FD values in this case. Fixes: 9263c2e92be9 ("can: mcp251xfd: ring: add support for runtime configurable RX/TX ring parameters") Link: https://lore.kernel.org/all/20240805-mcp251xfd-fix-ringconfig-v1-1-72086f0ca5ee@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12can: m_can: Release irq on error in m_can_openSimon Horman
[ Upstream commit 06d4ef3056a7ac31be331281bb7a6302ef5a7f8a ] It appears that the irq requested in m_can_open() may be leaked if an error subsequently occurs: if m_can_start() fails. Address this by calling free_irq in the unwind path for such cases. Flagged by Smatch. Compile tested only. Fixes: eaacfeaca7ad ("can: m_can: Call the RAM init directly from m_can_chip_config") Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/all/20240805-mcan-irq-v2-1-7154c0484819@kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12can: bcm: Remove proc entry when dev is unregistered.Kuniyuki Iwashima
[ Upstream commit 76fe372ccb81b0c89b6cd2fec26e2f38c958be85 ] syzkaller reported a warning in bcm_connect() below. [0] The repro calls connect() to vxcan1, removes vxcan1, and calls connect() with ifindex == 0. Calling connect() for a BCM socket allocates a proc entry. Then, bcm_sk(sk)->bound is set to 1 to prevent further connect(). However, removing the bound device resets bcm_sk(sk)->bound to 0 in bcm_notify(). The 2nd connect() tries to allocate a proc entry with the same name and sets NULL to bcm_sk(sk)->bcm_proc_read, leaking the original proc entry. Since the proc entry is available only for connect()ed sockets, let's clean up the entry when the bound netdev is unregistered. [0]: proc_dir_entry 'can-bcm/2456' already registered WARNING: CPU: 1 PID: 394 at fs/proc/generic.c:376 proc_register+0x645/0x8f0 fs/proc/generic.c:375 Modules linked in: CPU: 1 PID: 394 Comm: syz-executor403 Not tainted 6.10.0-rc7-g852e42cc2dd4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:proc_register+0x645/0x8f0 fs/proc/generic.c:375 Code: 00 00 00 00 00 48 85 ed 0f 85 97 02 00 00 4d 85 f6 0f 85 9f 02 00 00 48 c7 c7 9b cb cf 87 48 89 de 4c 89 fa e8 1c 6f eb fe 90 <0f> 0b 90 90 48 c7 c7 98 37 99 89 e8 cb 7e 22 05 bb 00 00 00 10 48 RSP: 0018:ffa0000000cd7c30 EFLAGS: 00010246 RAX: 9e129be1950f0200 RBX: ff1100011b51582c RCX: ff1100011857cd80 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002 RBP: 0000000000000000 R08: ffd400000000000f R09: ff1100013e78cac0 R10: ffac800000cd7980 R11: ff1100013e12b1f0 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ff1100011a99a2ec FS: 00007fbd7086f740(0000) GS:ff1100013fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200071c0 CR3: 0000000118556004 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> proc_create_net_single+0x144/0x210 fs/proc/proc_net.c:220 bcm_connect+0x472/0x840 net/can/bcm.c:1673 __sys_connect_file net/socket.c:2049 [inline] __sys_connect+0x5d2/0x690 net/socket.c:2066 __do_sys_connect net/socket.c:2076 [inline] __se_sys_connect net/socket.c:2073 [inline] __x64_sys_connect+0x8f/0x100 net/socket.c:2073 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1c0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fbd708b0e5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007fff8cd33f08 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fbd708b0e5d RDX: 0000000000000010 RSI: 0000000020000040 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000040 R09: 0000000000000040 R10: 0000000000000040 R11: 0000000000000246 R12: 00007fff8cd34098 R13: 0000000000401280 R14: 0000000000406de8 R15: 00007fbd70ab9000 </TASK> remove_proc_entry: removing non-empty directory 'net/can-bcm', leaking at least '2456' Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/all/20240722192842.37421-1-kuniyu@amazon.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12drm/amdgpu: check for LINEAR_ALIGNED correctly in check_tiling_flags_gfx6Marek Olšák
[ Upstream commit 11317d2963fa79767cd7c6231a00a9d77f2e0f54 ] Fix incorrect check. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12drm/amd/display: Check denominator pbn_div before usedAlex Hung
[ Upstream commit 116a678f3a9abc24f5c9d2525b7393d18d9eb58e ] [WHAT & HOW] A denominator cannot be 0, and is checked before used. This fixes 1 DIVIDE_BY_ZERO issue reported by Coverity. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12pcmcia: Use resource_size function on resource objectJules Irenge
[ Upstream commit 24a025497e7e883bd2adef5d0ece1e9b9268009f ] Cocinnele reports a warning WARNING: Suspicious code. resource_size is maybe missing with root The root cause is the function resource_size is not used when needed Use resource_size() on variable "root" of type resource Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12media: qcom: camss: Add check for v4l2_fwnode_endpoint_parseChen Ni
[ Upstream commit 4caf6d93d9f2c11d6441c64e1c549c445fa322ed ] Add check for the return value of v4l2_fwnode_endpoint_parse() and return the error if it fails in order to catch the error. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12Input: ili210x - use kvmalloc() to allocate buffer for firmware updateDmitry Torokhov
[ Upstream commit 17f5eebf6780eee50f887542e1833fda95f53e4d ] Allocating a contiguous buffer of 64K may fail if memory is sufficiently fragmented, and may cause OOM kill of an unrelated process. However we do not need to have contiguous memory. We also do not need to zero out the buffer since it will be overwritten with firmware data. Switch to using kvmalloc() instead of kzalloc(). Link: https://lore.kernel.org/r/20240609234757.610273-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0)Kishon Vijay Abraham I
[ Upstream commit 86f271f22bbb6391410a07e08d6ca3757fda01fa ] Errata #i2037 in AM65x/DRA80xM Processors Silicon Revision 1.0 (SPRZ452D_July 2018_Revised December 2019 [1]) mentions when an inbound PCIe TLP spans more than two internal AXI 128-byte bursts, the bus may corrupt the packet payload and the corrupt data may cause associated applications or the processor to hang. The workaround for Errata #i2037 is to limit the maximum read request size and maximum payload size to 128 bytes. Add workaround for Errata #i2037 here. The errata and workaround is applicable only to AM65x SR 1.0 and later versions of the silicon will have this fixed. [1] -> https://www.ti.com/lit/er/sprz452i/sprz452i.pdf Link: https://lore.kernel.org/linux-pci/16e1fcae-1ea7-46be-b157-096e05661b15@siemens.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Achal Verma <a-verma1@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12media: vivid: don't set HDMI TX controls if there are no HDMI outputsHans Verkuil
[ Upstream commit 17763960b1784578e8fe915304b330922f646209 ] When setting the EDID it would attempt to update two controls that are only present if there is an HDMI output configured. If there isn't any (e.g. when the vivid module is loaded with node_types=1), then calling VIDIOC_S_EDID would crash. Fix this by first checking if outputs are present. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12drm/amdgpu: clear RB_OVERFLOW bit when enabling interruptsDanijel Slivka
[ Upstream commit afbf7955ff01e952dbdd465fa25a2ba92d00291c ] Why: Setting IH_RB_WPTR register to 0 will not clear the RB_OVERFLOW bit if RB_ENABLE is not set. How to fix: Set WPTR_OVERFLOW_CLEAR bit after RB_ENABLE bit is set. The RB_ENABLE bit is required to be set, together with WPTR_OVERFLOW_ENABLE bit so that setting WPTR_OVERFLOW_CLEAR bit would clear the RB_OVERFLOW. Signed-off-by: Danijel Slivka <danijel.slivka@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12drm/amdgpu: Fix smatch static checker warningHawking Zhang
[ Upstream commit bdbdc7cecd00305dc844a361f9883d3a21022027 ] adev->gfx.imu.funcs could be NULL Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12drm/amd/display: Check HDCP returned statusAlex Hung
[ Upstream commit 5d93060d430b359e16e7c555c8f151ead1ac614b ] [WHAT & HOW] Check mod_hdcp_execute_and_set() return values in authenticated_dp. This fixes 3 CHECKED_RETURN issues reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12usb: gadget: aspeed_udc: validate endpoint index for ast udcMa Ke
[ Upstream commit ee0d382feb44ec0f445e2ad63786cd7f3f6a8199 ] We should verify the bound of the array to assure that host may not manipulate the index to point past endpoint array. Found by static analysis. Signed-off-by: Ma Ke <make24@iscas.ac.cn> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> Link: https://lore.kernel.org/r/20240625022306.2568122-1-make24@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12usb: uas: set host status byte on data completion errorShantanu Goel
[ Upstream commit 9d32685a251a754f1823d287df233716aa23bcb9 ] Set the host status byte when a data completion error is encountered otherwise the upper layer may end up using the invalid zero'ed data. The following output was observed from scsi/sd.c prior to this fix. [ 11.872824] sd 0:0:0:1: [sdf] tag#9 data cmplt err -75 uas-tag 1 inflight: [ 11.872826] sd 0:0:0:1: [sdf] tag#9 CDB: Read capacity(16) 9e 10 00 00 00 00 00 00 00 00 00 00 00 20 00 00 [ 11.872830] sd 0:0:0:1: [sdf] Sector size 0 reported, assuming 512. Signed-off-by: Shantanu Goel <sgoel01@yahoo.com> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/87msnx4ec6.fsf@yahoo.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12wifi: brcmsmac: advertise MFP_CAPABLE to enable WPA3Arend van Spriel
[ Upstream commit dbb5265a5d7cca1cdba7736dba313ab7d07bc19d ] After being asked about support for WPA3 for BCM43224 chipset it was found that all it takes is setting the MFP_CAPABLE flag and mac80211 will take care of all that is needed [1]. Link: https://lore.kernel.org/linux-wireless/20200526155909.5807-2-Larry.Finger@lwfinger.net/ [1] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Reijer Boekhoff <reijerboekhoff@protonmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240617122609.349582-1-arend.vanspriel@broadcom.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12leds: spi-byte: Call of_node_put() on error pathAndy Shevchenko
[ Upstream commit 7f9ab862e05c5bc755f65bf6db7edcffb3b49dfc ] Add a missing call to of_node_put(np) on error. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240606173037.3091598-2-andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12media: vivid: fix wrong sizeimage value for mplaneHans Verkuil
[ Upstream commit 0fd7c0c2c156270dceb8c15fad3120cdce03e539 ] In several places a division by fmt->vdownsampling[p] was missing in the sizeimage[p] calculation, causing incorrect behavior for multiplanar formats were some planes are smaller than the first plane. Found by new v4l2-compliance tests. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12fs/ntfs3: One more reason to mark inode badKonstantin Komarov
[ Upstream commit a0dde5d7a58b6bf9184ef3d8c6e62275c3645584 ] In addition to returning an error, mark the node as bad. Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12udf: Avoid excessive partition lengthsJan Kara
[ Upstream commit ebbe26fd54a9621994bc16b14f2ba8f84c089693 ] Avoid mounting filesystems where the partition would overflow the 32-bits used for block number. Also refuse to mount filesystems where the partition length is so large we cannot safely index bits in a block bitmap. Link: https://patch.msgid.link/20240620130403.14731-1-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12netfilter: nf_conncount: fix wrong variable typeYunjian Wang
[ Upstream commit 0b88d1654d556264bcd24a9cb6383f0888e30131 ] Now there is a issue is that code checks reports a warning: implicit narrowing conversion from type 'unsigned int' to small type 'u8' (the 'keylen' variable). Fix it by removing the 'keylen' variable. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12iommu: sun50i: clear bypass registerJernej Skrabec
[ Upstream commit 927c70c93d929f4c2dcaf72f51b31bb7d118a51a ] The Allwinner H6 IOMMU has a bypass register, which allows to circumvent the page tables for each possible master. The reset value for this register is 0, which disables the bypass. The Allwinner H616 IOMMU resets this register to 0x7f, which activates the bypass for all masters, which is not what we want. Always clear this register to 0, to enforce the usage of page tables, and make this driver compatible with the H616 in this respect. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20240616224056.29159-2-andre.przywara@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12x86/kmsan: Fix hook for unaligned accessesBrian Johannesmeyer
[ Upstream commit bf6ab33d8487f5e2a0998ce75286eae65bb0a6d6 ] When called with a 'from' that is not 4-byte-aligned, string_memcpy_fromio() calls the movs() macro to copy the first few bytes, so that 'from' becomes 4-byte-aligned before calling rep_movs(). This movs() macro modifies 'to', and the subsequent line modifies 'n'. As a result, on unaligned accesses, kmsan_unpoison_memory() uses the updated (aligned) values of 'to' and 'n'. Hence, it does not unpoison the entire region. Save the original values of 'to' and 'n', and pass those to kmsan_unpoison_memory(), so that the entire region is unpoisoned. Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Alexander Potapenko <glider@google.com> Link: https://lore.kernel.org/r/20240523215029.4160518-1-bjohannesmeyer@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12af_unix: Remove put_pid()/put_cred() in copy_peercred().Kuniyuki Iwashima
[ Upstream commit e4bd881d987121dbf1a288641491955a53d9f8f7 ] When (AF_UNIX, SOCK_STREAM) socket connect()s to a listening socket, the listener's sk_peer_pid/sk_peer_cred are copied to the client in copy_peercred(). Then, the client's sk_peer_pid and sk_peer_cred are always NULL, so we need not call put_pid() and put_cred() there. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12irqchip/armada-370-xp: Do not allow mapping IRQ 0 and 1Pali Rohár
[ Upstream commit 3cef738208e5c3cb7084e208caf9bbf684f24feb ] IRQs 0 (IPI) and 1 (MSI) are handled internally by this driver, generic_handle_domain_irq() is never called for these IRQs. Disallow mapping these IRQs. [ Marek: changed commit message ] Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12ELF: fix kernel.randomize_va_space double readAlexey Dobriyan
[ Upstream commit 2a97388a807b6ab5538aa8f8537b2463c6988bd2 ] ELF loader uses "randomize_va_space" twice. It is sysctl and can change at any moment, so 2 loads could see 2 different values in theory with unpredictable consequences. Issue exactly one load for consistent value across one exec. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Link: https://lore.kernel.org/r/3329905c-7eb8-400a-8f0a-d87cff979b5b@p183 Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12smack: unix sockets: fix accept()ed socket labelKonstantin Andreev
[ Upstream commit e86cac0acdb1a74f608bacefe702f2034133a047 ] When a process accept()s connection from a unix socket (either stream or seqpacket) it gets the socket with the label of the connecting process. For example, if a connecting process has a label 'foo', the accept()ed socket will also have 'in' and 'out' labels 'foo', regardless of the label of the listener process. This is because kernel creates unix child sockets in the context of the connecting process. I do not see any obvious way for the listener to abuse alien labels coming with the new socket, but, to be on the safe side, it's better fix new socket labels. Signed-off-by: Konstantin Andreev <andreev@swemel.ru> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12ALSA: hda: Add input value sanity checks to HDMI channel map controlsTakashi Iwai
[ Upstream commit 6278056e42d953e207e2afd416be39d09ed2d496 ] Add a simple sanity check to HD-audio HDMI Channel Map controls. Although the value might not be accepted for the actual connection, we can filter out some bogus values beforehand, and that should be enough for making kselftest happier. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/20240616073454.16512-7-tiwai@suse.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12ALSA: control: Apply sanity check of input values for user elementsTakashi Iwai
[ Upstream commit 50ed081284fe2bfd1f25e8b92f4f6a4990e73c0a ] Although we have already a mechanism for sanity checks of input values for control writes, it's not applied unless the kconfig CONFIG_SND_CTL_INPUT_VALIDATION is set due to the performance reason. Nevertheless, it still makes sense to apply the same check for user elements despite of its cost, as that's the only way to filter out the invalid values; the user controls are handled solely in ALSA core code, and there is no corresponding driver, after all. This patch adds the same input value validation for user control elements at its put callback. The kselftest will be happier with this change, as the incorrect values will be bailed out now with errors. For other normal controls, the check is applied still only when CONFIG_SND_CTL_INPUT_VALIDATION is set. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/r/1d44be36-9bb9-4d82-8953-5ae2a4f09405@molgen.mpg.de Reviewed-by: Jaroslav Kysela <perex@perex.cz> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/20240616073454.16512-4-tiwai@suse.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12nilfs2: fix state management in error path of log writing functionRyusuke Konishi
commit 6576dd6695f2afca3f4954029ac4a64f82ba60ab upstream. After commit a694291a6211 ("nilfs2: separate wait function from nilfs_segctor_write") was applied, the log writing function nilfs_segctor_do_construct() was able to issue I/O requests continuously even if user data blocks were split into multiple logs across segments, but two potential flaws were introduced in its error handling. First, if nilfs_segctor_begin_construction() fails while creating the second or subsequent logs, the log writing function returns without calling nilfs_segctor_abort_construction(), so the writeback flag set on pages/folios will remain uncleared. This causes page cache operations to hang waiting for the writeback flag. For example, truncate_inode_pages_final(), which is called via nilfs_evict_inode() when an inode is evicted from memory, will hang. Second, the NILFS_I_COLLECTED flag set on normal inodes remain uncleared. As a result, if the next log write involves checkpoint creation, that's fine, but if a partial log write is performed that does not, inodes with NILFS_I_COLLECTED set are erroneously removed from the "sc_dirty_files" list, and their data and b-tree blocks may not be written to the device, corrupting the block mapping. Fix these issues by uniformly calling nilfs_segctor_abort_construction() on failure of each step in the loop in nilfs_segctor_do_construct(), having it clean up logs and segment usages according to progress, and correcting the conditions for calling nilfs_redirty_inodes() to ensure that the NILFS_I_COLLECTED flag is cleared. Link: https://lkml.kernel.org/r/20240814101119.4070-1-konishi.ryusuke@gmail.com Fixes: a694291a6211 ("nilfs2: separate wait function from nilfs_segctor_write") Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12nilfs2: protect references to superblock parameters exposed in sysfsRyusuke Konishi
commit 683408258917541bdb294cd717c210a04381931e upstream. The superblock buffers of nilfs2 can not only be overwritten at runtime for modifications/repairs, but they are also regularly swapped, replaced during resizing, and even abandoned when degrading to one side due to backing device issues. So, accessing them requires mutual exclusion using the reader/writer semaphore "nilfs->ns_sem". Some sysfs attribute show methods read this superblock buffer without the necessary mutual exclusion, which can cause problems with pointer dereferencing and memory access, so fix it. Link: https://lkml.kernel.org/r/20240811100320.9913-1-konishi.ryusuke@gmail.com Fixes: da7141fb78db ("nilfs2: add /sys/fs/nilfs2/<device> group") Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12nilfs2: fix missing cleanup on rollforward recovery errorRyusuke Konishi
commit 5787fcaab9eb5930f5378d6a1dd03d916d146622 upstream. In an error injection test of a routine for mount-time recovery, KASAN found a use-after-free bug. It turned out that if data recovery was performed using partial logs created by dsync writes, but an error occurred before starting the log writer to create a recovered checkpoint, the inodes whose data had been recovered were left in the ns_dirty_files list of the nilfs object and were not freed. Fix this issue by cleaning up inodes that have read the recovery data if the recovery routine fails midway before the log writer starts. Link: https://lkml.kernel.org/r/20240810065242.3701-1-konishi.ryusuke@gmail.com Fixes: 0f3e1c7f23f8 ("nilfs2: recovery functions") Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12sched: sch_cake: fix bulk flow accounting logic for host fairnessToke Høiland-Jørgensen
commit 546ea84d07e3e324644025e2aae2d12ea4c5896e upstream. In sch_cake, we keep track of the count of active bulk flows per host, when running in dst/src host fairness mode, which is used as the round-robin weight when iterating through flows. The count of active bulk flows is updated whenever a flow changes state. This has a peculiar interaction with the hash collision handling: when a hash collision occurs (after the set-associative hashing), the state of the hash bucket is simply updated to match the new packet that collided, and if host fairness is enabled, that also means assigning new per-host state to the flow. For this reason, the bulk flow counters of the host(s) assigned to the flow are decremented, before new state is assigned (and the counters, which may not belong to the same host anymore, are incremented again). Back when this code was introduced, the host fairness mode was always enabled, so the decrement was unconditional. When the configuration flags were introduced the *increment* was made conditional, but the *decrement* was not. Which of course can lead to a spurious decrement (and associated wrap-around to U16_MAX). AFAICT, when host fairness is disabled, the decrement and wrap-around happens as soon as a hash collision occurs (which is not that common in itself, due to the set-associative hashing). However, in most cases this is harmless, as the value is only used when host fairness mode is enabled. So in order to trigger an array overflow, sch_cake has to first be configured with host fairness disabled, and while running in this mode, a hash collision has to occur to cause the overflow. Then, the qdisc has to be reconfigured to enable host fairness, which leads to the array out-of-bounds because the wrapped-around value is retained and used as an array index. It seems that syzbot managed to trigger this, which is quite impressive in its own right. This patch fixes the issue by introducing the same conditional check on decrement as is used on increment. The original bug predates the upstreaming of cake, but the commit listed in the Fixes tag touched that code, meaning that this patch won't apply before that. Fixes: 712639929912 ("sch_cake: Make the dual modes fairer") Reported-by: syzbot+7fe7b81d602cc1e6b94d@syzkaller.appspotmail.com Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20240903160846.20909-1-toke@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12ila: call nf_unregister_net_hooks() soonerEric Dumazet
commit 031ae72825cef43e4650140b800ad58bf7a6a466 upstream. syzbot found an use-after-free Read in ila_nf_input [1] Issue here is that ila_xlat_exit_net() frees the rhashtable, then call nf_unregister_net_hooks(). It should be done in the reverse way, with a synchronize_rcu(). This is a good match for a pre_exit() method. [1] BUG: KASAN: use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline] BUG: KASAN: use-after-free in __rhashtable_lookup include/linux/rhashtable.h:604 [inline] BUG: KASAN: use-after-free in rhashtable_lookup include/linux/rhashtable.h:646 [inline] BUG: KASAN: use-after-free in rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672 Read of size 4 at addr ffff888064620008 by task ksoftirqd/0/16 CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.11.0-rc4-syzkaller-00238-g2ad6d23f465a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 rht_key_hashfn include/linux/rhashtable.h:159 [inline] __rhashtable_lookup include/linux/rhashtable.h:604 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672 ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:132 [inline] ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline] ila_nf_input+0x1fe/0x3c0 net/ipv6/ila/ila_xlat.c:190 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK+0x29e/0x450 include/linux/netfilter.h:312 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1ea/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6108 __napi_poll+0xcb/0x490 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6963 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 run_ksoftirqd+0xca/0x130 kernel/softirq.c:928 smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x64620 flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) page_type: 0xbfffffff(buddy) raw: 00fff00000000000 ffffea0000959608 ffffea00019d9408 0000000000000000 raw: 0000000000000000 0000000000000003 00000000bfffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 5242, tgid 5242 (syz-executor), ts 73611328570, free_ts 618981657187 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1493 prep_new_page mm/page_alloc.c:1501 [inline] get_page_from_freelist+0x2e4c/0x2f10 mm/page_alloc.c:3439 __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4695 __alloc_pages_node_noprof include/linux/gfp.h:269 [inline] alloc_pages_node_noprof include/linux/gfp.h:296 [inline] ___kmalloc_large_node+0x8b/0x1d0 mm/slub.c:4103 __kmalloc_large_node_noprof+0x1a/0x80 mm/slub.c:4130 __do_kmalloc_node mm/slub.c:4146 [inline] __kmalloc_node_noprof+0x2d2/0x440 mm/slub.c:4164 __kvmalloc_node_noprof+0x72/0x190 mm/util.c:650 bucket_table_alloc lib/rhashtable.c:186 [inline] rhashtable_init_noprof+0x534/0xa60 lib/rhashtable.c:1071 ila_xlat_init_net+0xa0/0x110 net/ipv6/ila/ila_xlat.c:613 ops_init+0x359/0x610 net/core/net_namespace.c:139 setup_net+0x515/0xca0 net/core/net_namespace.c:343 copy_net_ns+0x4e2/0x7b0 net/core/net_namespace.c:508 create_new_namespaces+0x425/0x7b0 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0x124/0x180 kernel/nsproxy.c:228 ksys_unshare+0x619/0xc10 kernel/fork.c:3328 __do_sys_unshare kernel/fork.c:3399 [inline] __se_sys_unshare kernel/fork.c:3397 [inline] __x64_sys_unshare+0x38/0x40 kernel/fork.c:3397 page last free pid 11846 tgid 11846 stack trace: reset_page_owner include/linux/page_owner.h:25 [inline] free_pages_prepare mm/page_alloc.c:1094 [inline] free_unref_page+0xd22/0xea0 mm/page_alloc.c:2612 __folio_put+0x2c8/0x440 mm/swap.c:128 folio_put include/linux/mm.h:1486 [inline] free_large_kmalloc+0x105/0x1c0 mm/slub.c:4565 kfree+0x1c4/0x360 mm/slub.c:4588 rhashtable_free_and_destroy+0x7c6/0x920 lib/rhashtable.c:1169 ila_xlat_exit_net+0x55/0x110 net/ipv6/ila/ila_xlat.c:626 ops_exit_list net/core/net_namespace.c:173 [inline] cleanup_net+0x802/0xcc0 net/core/net_namespace.c:640 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312 worker_thread+0x86d/0xd40 kernel/workqueue.c:3390 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Memory state around the buggy address: ffff88806461ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88806461ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff888064620000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888064620080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888064620100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Fixes: 7f00feaf1076 ("ila: Add generic ILA translation facility") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <tom@herbertland.com> Reviewed-by: Florian Westphal <fw@strlen.de> Link: https://patch.msgid.link/20240904144418.1162839-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12tcp_bpf: fix return value of tcp_bpf_sendmsg()Cong Wang
commit fe1910f9337bd46a9343967b547ccab26b4b2c6e upstream. When we cork messages in psock->cork, the last message triggers the flushing will result in sending a sk_msg larger than the current message size. In this case, in tcp_bpf_send_verdict(), 'copied' becomes negative at least in the following case: 468 case __SK_DROP: 469 default: 470 sk_msg_free_partial(sk, msg, tosend); 471 sk_msg_apply_bytes(psock, tosend); 472 *copied -= (tosend + delta); // <==== HERE 473 return -EACCES; Therefore, it could lead to the following BUG with a proper value of 'copied' (thanks to syzbot). We should not use negative 'copied' as a return value here. ------------[ cut here ]------------ kernel BUG at net/socket.c:733! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 UID: 0 PID: 3265 Comm: syz-executor510 Not tainted 6.11.0-rc3-syzkaller-00060-gd07b43284ab3 #0 Hardware name: linux,dummy-virt (DT) pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : sock_sendmsg_nosec net/socket.c:733 [inline] pc : sock_sendmsg_nosec net/socket.c:728 [inline] pc : __sock_sendmsg+0x5c/0x60 net/socket.c:745 lr : sock_sendmsg_nosec net/socket.c:730 [inline] lr : __sock_sendmsg+0x54/0x60 net/socket.c:745 sp : ffff800088ea3b30 x29: ffff800088ea3b30 x28: fbf00000062bc900 x27: 0000000000000000 x26: ffff800088ea3bc0 x25: ffff800088ea3bc0 x24: 0000000000000000 x23: f9f00000048dc000 x22: 0000000000000000 x21: ffff800088ea3d90 x20: f9f00000048dc000 x19: ffff800088ea3d90 x18: 0000000000000001 x17: 0000000000000000 x16: 0000000000000000 x15: 000000002002ffaf x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: ffff8000815849c0 x9 : ffff8000815b49c0 x8 : 0000000000000000 x7 : 000000000000003f x6 : 0000000000000000 x5 : 00000000000007e0 x4 : fff07ffffd239000 x3 : fbf00000062bc900 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 00000000fffffdef Call trace: sock_sendmsg_nosec net/socket.c:733 [inline] __sock_sendmsg+0x5c/0x60 net/socket.c:745 ____sys_sendmsg+0x274/0x2ac net/socket.c:2597 ___sys_sendmsg+0xac/0x100 net/socket.c:2651 __sys_sendmsg+0x84/0xe0 net/socket.c:2680 __do_sys_sendmsg net/socket.c:2689 [inline] __se_sys_sendmsg net/socket.c:2687 [inline] __arm64_sys_sendmsg+0x24/0x30 net/socket.c:2687 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x48/0x110 arch/arm64/kernel/syscall.c:49 el0_svc_common.constprop.0+0x40/0xe0 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x1c/0x28 arch/arm64/kernel/syscall.c:151 el0_svc+0x34/0xec arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x100/0x12c arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x19c/0x1a0 arch/arm64/kernel/entry.S:598 Code: f9404463 d63f0060 3108441f 54fffe81 (d4210000) ---[ end trace 0000000000000000 ]--- Fixes: 4f738adba30a ("bpf: create tcp_bpf_ulp allowing BPF to monitor socket TX/RX data") Reported-by: syzbot+58c03971700330ce14d8@syzkaller.appspotmail.com Cc: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20240821030744.320934-1-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12Revert "drm/amdgpu: align pp_power_profile_mode with kernel docs"Alex Deucher
commit 1a8d845470941f1b6de1b392227530c097dc5e0c upstream. This reverts commit 8f614469de248a4bc55fb07e55d5f4c340c75b11. This breaks some manual setting of the profile mode in certain cases. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3600 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 7a199557643e993d4e7357860624b8aa5d8f4340) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12x86/fpu: Avoid writing LBR bit to IA32_XSS unless supportedMitchell Levy
commit 2848ff28d180bd63a95da8e5dcbcdd76c1beeb7b upstream. There are two distinct CPU features related to the use of XSAVES and LBR: whether LBR is itself supported and whether XSAVES supports LBR. The LBR subsystem correctly checks both in intel_pmu_arch_lbr_init(), but the XSTATE subsystem does not. The LBR bit is only removed from xfeatures_mask_independent when LBR is not supported by the CPU, but there is no validation of XSTATE support. If XSAVES does not support LBR the write to IA32_XSS causes a #GP fault, leaving the state of IA32_XSS unchanged, i.e. zero. The fault is handled with a warning and the boot continues. Consequently the next XRSTORS which tries to restore supervisor state fails with #GP because the RFBM has zero for all supervisor features, which does not match the XCOMP_BV field. As XFEATURE_MASK_FPSTATE includes supervisor features setting up the FPU causes a #GP, which ends up in fpu_reset_from_exception_fixup(). That fails due to the same problem resulting in recursive #GPs until the kernel runs out of stack space and double faults. Prevent this by storing the supported independent features in fpu_kernel_cfg during XSTATE initialization and use that cached value for retrieving the independent feature bits to be written into IA32_XSS. [ tglx: Massaged change log ] Fixes: f0dccc9da4c0 ("x86/fpu/xstate: Support dynamic supervisor feature for LBR") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Mitchell Levy <levymitchell0@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20240812-xsave-lbr-fix-v3-1-95bac1bf62f4@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12net: mctp-serial: Fix missing escapes on transmitMatt Johnston
commit f962e8361adfa84e8252d3fc3e5e6bb879f029b1 upstream. 0x7d and 0x7e bytes are meant to be escaped in the data portion of frames, but this didn't occur since next_chunk_len() had an off-by-one error. That also resulted in the final byte of a payload being written as a separate tty write op. The chunk prior to an escaped byte would be one byte short, and the next call would never test the txpos+1 case, which is where the escaped byte was located. That meant it never hit the escaping case in mctp_serial_tx_work(). Example Input: 01 00 08 c8 7e 80 02 Previous incorrect chunks from next_chunk_len(): 01 00 08 c8 7e 80 02 With this fix: 01 00 08 c8 7e 80 02 Cc: stable@vger.kernel.org Fixes: a0c2ccd9b5ad ("mctp: Add MCTP-over-serial transport binding") Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12tracing: Avoid possible softlockup in tracing_iter_reset()Zheng Yejian
commit 49aa8a1f4d6800721c7971ed383078257f12e8f9 upstream. In __tracing_open(), when max latency tracers took place on the cpu, the time start of its buffer would be updated, then event entries with timestamps being earlier than start of the buffer would be skipped (see tracing_iter_reset()). Softlockup will occur if the kernel is non-preemptible and too many entries were skipped in the loop that reset every cpu buffer, so add cond_resched() to avoid it. Cc: stable@vger.kernel.org Fixes: 2f26ebd549b9a ("tracing: use timestamp to determine start of latency traces") Link: https://lore.kernel.org/20240827124654.3817443-1-zhengyejian@huaweicloud.com Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Zheng Yejian <zhengyejian@huaweicloud.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12spi: rockchip: Resolve unbalanced runtime PM / system PM handlingBrian Norris
commit be721b451affbecc4ba4eaac3b71cdbdcade1b1b upstream. Commit e882575efc77 ("spi: rockchip: Suspend and resume the bus during NOIRQ_SYSTEM_SLEEP_PM ops") stopped respecting runtime PM status and simply disabled clocks unconditionally when suspending the system. This causes problems when the device is already runtime suspended when we go to sleep -- in which case we double-disable clocks and produce a WARNing. Switch back to pm_runtime_force_{suspend,resume}(), because that still seems like the right thing to do, and the aforementioned commit makes no explanation why it stopped using it. Also, refactor some of the resume() error handling, because it's not actually a good idea to re-disable clocks on failure. Fixes: e882575efc77 ("spi: rockchip: Suspend and resume the bus during NOIRQ_SYSTEM_SLEEP_PM ops") Cc: stable@vger.kernel.org Reported-by: Ondřej Jirman <megi@xff.cz> Closes: https://lore.kernel.org/lkml/20220621154218.sau54jeij4bunf56@core/ Signed-off-by: Brian Norris <briannorris@chromium.org> Link: https://patch.msgid.link/20240827171126.1115748-1-briannorris@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_openSimon Arlott
commit 7dd9c26bd6cf679bcfdef01a8659791aa6487a29 upstream. The mcp251x_hw_wake() function is called with the mpc_lock mutex held and disables the interrupt handler so that no interrupts can be processed while waking the device. If an interrupt has already occurred then waiting for the interrupt handler to complete will deadlock because it will be trying to acquire the same mutex. CPU0 CPU1 ---- ---- mcp251x_open() mutex_lock(&priv->mcp_lock) request_threaded_irq() <interrupt> mcp251x_can_ist() mutex_lock(&priv->mcp_lock) mcp251x_hw_wake() disable_irq() <-- deadlock Use disable_irq_nosync() instead because the interrupt handler does everything while holding the mutex so it doesn't matter if it's still running. Fixes: 8ce8c0abcba3 ("can: mcp251x: only reset hardware as required") Signed-off-by: Simon Arlott <simon@octiron.net> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/4fc08687-1d80-43fe-9f0d-8ef8475e75f6@0882a8b5-c6c3-11e9-b005-00805fc181fe.uuid.home.arpa Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12clk: qcom: clk-alpha-pll: Fix the trion pll postdiv set rate APISatya Priya Kakitapalli
commit 4ad1ed6ef27cab94888bb3c740c14042d5c0dff2 upstream. Correct the pll postdiv shift used in clk_trion_pll_postdiv_set_rate API. The shift value is not same for different types of plls and should be taken from the pll's .post_div_shift member. Fixes: 548a909597d5 ("clk: qcom: clk-alpha-pll: Add support for Trion PLLs") Cc: stable@vger.kernel.org Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240731062916.2680823-3-quic_skakitap@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12clk: qcom: clk-alpha-pll: Fix the pll post div maskSatya Priya Kakitapalli
commit 2c4553e6c485a96b5d86989eb9654bf20e51e6dd upstream. The PLL_POST_DIV_MASK should be 0 to (width - 1) bits. Fix it. Fixes: 1c3541145cbf ("clk: qcom: support for 2 bit PLL post divider") Cc: stable@vger.kernel.org Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Link: https://lore.kernel.org/r/20240731062916.2680823-2-quic_skakitap@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12fuse: use unsigned type for getxattr/listxattr size truncationJann Horn
commit b18915248a15eae7d901262f108d6ff0ffb4ffc1 upstream. The existing code uses min_t(ssize_t, outarg.size, XATTR_LIST_MAX) when parsing the FUSE daemon's response to a zero-length getxattr/listxattr request. On 32-bit kernels, where ssize_t and outarg.size are the same size, this is wrong: The min_t() will pass through any size values that are negative when interpreted as signed. fuse_listxattr() will then return this userspace-supplied negative value, which callers will treat as an error value. This kind of bug pattern can lead to fairly bad security bugs because of how error codes are used in the Linux kernel. If a caller were to convert the numeric error into an error pointer, like so: struct foo *func(...) { int len = fuse_getxattr(..., NULL, 0); if (len < 0) return ERR_PTR(len); ... } then it would end up returning this userspace-supplied negative value cast to a pointer - but the caller of this function wouldn't recognize it as an error pointer (IS_ERR_VALUE() only detects values in the narrow range in which legitimate errno values are), and so it would just be treated as a kernel pointer. I think there is at least one theoretical codepath where this could happen, but that path would involve virtio-fs with submounts plus some weird SELinux configuration, so I think it's probably not a concern in practice. Cc: stable@vger.kernel.org # v4.9 Fixes: 63401ccdb2ca ("fuse: limit xattr returned size") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12fuse: update stats for pages in dropped aux writeback listJoanne Koong
commit f7790d67785302b3116bbbfda62a5a44524601a3 upstream. In the case where the aux writeback list is dropped (e.g. the pages have been truncated or the connection is broken), the stats for its pages and backing device info need to be updated as well. Fixes: e2653bd53a98 ("fuse: fix leaked aux requests") Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Cc: <stable@vger.kernel.org> # v5.1 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 05:52:29 +0000