summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-09-12ASoc: SOF: topology: Clear SOF link platform name upon unloadChen-Yu Tsai
[ Upstream commit e0be875c5bf03a9676a6bfed9e0f1766922a7dbd ] The SOF topology loading function sets the device name for the platform component link. This should be unset when unloading the topology, otherwise a machine driver unbind/bind or reprobe would complain about an invalid component as having both its component name and of_node set: mt8186_mt6366 sound: ASoC: Both Component name/of_node are set for AFE_SOF_DL1 mt8186_mt6366 sound: error -EINVAL: Cannot register card mt8186_mt6366 sound: probe with driver mt8186_mt6366 failed with error -22 This happens with machine drivers that set the of_node separately. Clear the SOF link platform name in the topology unload callback. Fixes: 311ce4fe7637 ("ASoC: SOF: Add support for loading topologies") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://patch.msgid.link/20240821041006.2618855-1-wenst@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12nvmet-tcp: fix kernel crash if commands allocation failsMaurizio Lombardi
[ Upstream commit 5572a55a6f830ee3f3a994b6b962a5c327d28cb3 ] If the commands allocation fails in nvmet_tcp_alloc_cmds() the kernel crashes in nvmet_tcp_release_queue_work() because of a NULL pointer dereference. nvmet: failed to install queue 0 cntlid 1 ret 6 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Fix the bug by setting queue->nr_cmds to zero in case nvmet_tcp_alloc_cmd() fails. Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver") Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12ASoC: tegra: Fix CBB error during probe()Mohan Kumar
[ Upstream commit 6781b962d97bc52715a8db8cc17278cc3c23ebe8 ] When Tegra audio drivers are built as part of the kernel image, TIMEOUT_ERR is observed from cbb-fabric. Following is seen on Jetson AGX Orin during boot: [ 8.012482] ************************************** [ 8.017423] CPU:0, Error:cbb-fabric, Errmon:2 [ 8.021922] Error Code : TIMEOUT_ERR [ 8.025966] Overflow : Multiple TIMEOUT_ERR [ 8.030644] [ 8.032175] Error Code : TIMEOUT_ERR [ 8.036217] MASTER_ID : CCPLEX [ 8.039722] Address : 0x290a0a8 [ 8.043318] Cache : 0x1 -- Bufferable [ 8.047630] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 8.054628] Access_Type : Write [ 8.106130] WARNING: CPU: 0 PID: 124 at drivers/soc/tegra/cbb/tegra234-cbb.c:604 tegra234_cbb_isr+0x134/0x178 [ 8.240602] Call trace: [ 8.243126] tegra234_cbb_isr+0x134/0x178 [ 8.247261] __handle_irq_event_percpu+0x60/0x238 [ 8.252132] handle_irq_event+0x54/0xb8 These errors happen when MVC device, which is a child of AHUB device, tries to access its device registers. This happens as part of call tegra210_mvc_reset_vol_settings() in MVC device probe(). The root cause of this problem is, the child MVC device gets probed before the AHUB clock gets enabled. The AHUB clock is enabled in runtime PM resume of parent AHUB device and due to the wrong sequence of pm_runtime_enable() in AHUB driver, runtime PM resume doesn't happen for AHUB device when MVC makes register access. Fix this by calling pm_runtime_enable() for parent AHUB device before of_platform_populate() in AHUB driver. This ensures that clock becomes available when MVC makes register access. Fixes: 16e1bcc2caf4 ("ASoC: tegra: Add Tegra210 based AHUB driver") Signed-off-by: Mohan Kumar <mkumard@nvidia.com> Signed-off-by: Ritu Chaudhary <rituc@nvidia.com> Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://patch.msgid.link/20240823144342.4123814-3-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12powerpc/64e: Define mmu_pte_psize staticChristophe Leroy
[ Upstream commit d92b5cc29c792f1d3f0aaa3b29dddfe816c03e88 ] mmu_pte_psize is only used in the tlb_64e.c, define it static. Fixes: 25d21ad6e799 ("powerpc: Add TLB management code for 64-bit Book3E") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202408011256.1O99IB0s-lkp@intel.com/ Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/beb30d280eaa5d857c38a0834b147dffd6b28aa9.1724157750.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12powerpc/64e: split out nohash Book3E 64-bit codeMichael Ellerman
[ Upstream commit a898530eea3d0ba08c17a60865995a3bb468d1bc ] A reasonable chunk of nohash/tlb.c is 64-bit only code, split it out into a separate file. Link: https://lkml.kernel.org/r/cb2b118f9d8a86f82d01bfb9ad309d1d304480a1.1719928057.git.christophe.leroy@csgroup.eu Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Stable-dep-of: d92b5cc29c79 ("powerpc/64e: Define mmu_pte_psize static") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12powerpc/64e: remove unused IBM HTW codeMichael Ellerman
[ Upstream commit 88715b6e5d529f4ef3830ad2a893e4624c6af0b8 ] Patch series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)", v7. Unlike most architectures, powerpc 8xx HW requires a two-level pagetable topology for all page sizes. So a leaf PMD-contig approach is not feasible as such. Possible sizes on 8xx are 4k, 16k, 512k and 8M. First level (PGD/PMD) covers 4M per entry. For 8M pages, two PMD entries must point to a single entry level-2 page table. Until now that was done using hugepd. This series changes it to use standard page tables where the entry is replicated 1024 times on each of the two pagetables refered by the two associated PMD entries for that 8M page. For e500 and book3s/64 there are less constraints because it is not tied to the HW assisted tablewalk like on 8xx, so it is easier to use leaf PMDs (and PUDs). On e500 the supported page sizes are 4M, 16M, 64M, 256M and 1G. All at PMD level on e500/32 (mpc85xx) and mix of PMD and PUD for e500/64. We encode page size with 4 available bits in PTE entries. On e300/32 PGD entries size is increases to 64 bits in order to allow leaf-PMD entries because PTE are 64 bits on e500. On book3s/64 only the hash-4k mode is concerned. It supports 16M pages as cont-PMD and 16G pages as cont-PUD. In other modes (radix-4k, radix-6k and hash-64k) the sizes match with PMD and PUD sizes so that's just leaf entries. The hash processing make things a bit more complex. To ease things, __hash_page_huge() is modified to bail out when DIRTY or ACCESSED bits are missing, leaving it to mm core to fix it. This patch (of 23): The nohash HTW_IBM (Hardware Table Walk) code is unused since support for A2 was removed in commit fb5a515704d7 ("powerpc: Remove platforms/ wsp and associated pieces") (2014). The remaining supported CPUs use either no HTW (data_tlb_miss_bolted), or the e6500 HTW (data_tlb_miss_e6500). Link: https://lkml.kernel.org/r/cover.1719928057.git.christophe.leroy@csgroup.eu Link: https://lkml.kernel.org/r/820dd1385ecc931f07b0d7a0fa827b1613917ab6.1719928057.git.christophe.leroy@csgroup.eu Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Stable-dep-of: d92b5cc29c79 ("powerpc/64e: Define mmu_pte_psize static") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12drm/amdgpu: handle gfx12 in amdgpu_display_verify_sizesMarek Olšák
[ Upstream commit 8dd1426e2c80e32ac1995007330c8f95ffa28ebb ] It verified GFX9-11 swizzle modes on GFX12, which has undefined behavior. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12drm/amd: Add gfx12 swizzle mode defsAurabindo Pillai
[ Upstream commit 7ceb94e87bffff7c12b61eb29749e1d8ac976896 ] Add GFX12 swizzle mode definitions for use with DCN401 Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12can: mcp251xfd: rx: add workaround for erratum DS80000789E 6 of mcp2518fdMarc Kleine-Budde
[ Upstream commit 24436be590c6fbb05f6161b0dfba7d9da60214aa ] This patch tries to works around erratum DS80000789E 6 of the mcp2518fd, the other variants of the chip family (mcp2517fd and mcp251863) are probably also affected. In the bad case, the driver reads a too large head index. In the original code, the driver always trusted the read value, which caused old, already processed CAN frames or new, incompletely written CAN frames to be (re-)processed. To work around this issue, keep a per FIFO timestamp [1] of the last valid received CAN frame and compare against the timestamp of every received CAN frame. If an old CAN frame is detected, abort the iteration and mark the number of valid CAN frames as processed in the chip by incrementing the FIFO's tail index. Further tests showed that this workaround can recognize old CAN frames, but a small time window remains in which partially written CAN frames [2] are not recognized but then processed. These CAN frames have the correct data and time stamps, but the DLC has not yet been updated. [1] As the raw timestamp overflows every 107 seconds (at the usual clock rate of 40 MHz) convert it to nanoseconds with the timecounter framework and use this to detect stale CAN frames. Link: https://lore.kernel.org/all/BL3PR11MB64844C1C95CA3BDADAE4D8CCFBC99@BL3PR11MB6484.namprd11.prod.outlook.com [2] Reported-by: Stefan Althöfer <Stefan.Althoefer@janztec.com> Closes: https://lore.kernel.org/all/FR0P281MB1966273C216630B120ABB6E197E89@FR0P281MB1966.DEUP281.PROD.OUTLOOK.COM Tested-by: Stefan Althöfer <Stefan.Althoefer@janztec.com> Tested-by: Thomas Kopp <thomas.kopp@microchip.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12can: mcp251xfd: clarify the meaning of timestampMarc Kleine-Budde
[ Upstream commit e793c724b48ca8cae9693bc3be528e85284c126a ] The mcp251xfd chip is configured to provide a timestamp with each received and transmitted CAN frame. The timestamp is derived from the internal free-running timer, which can also be read from the TBC register via SPI. The timer is 32 bits wide and is clocked by the external oscillator (typically 20 or 40 MHz). To avoid confusion, we call this timestamp "timestamp_raw" or "ts_raw" for short. Using the timecounter framework, the "ts_raw" is converted to 64 bit nanoseconds since the epoch. This is what we call "timestamp". This is a preparation for the next patches which use the "timestamp" to work around a bug where so far only the "ts_raw" is used. Tested-by: Stefan Althöfer <Stefan.Althoefer@janztec.com> Tested-by: Thomas Kopp <thomas.kopp@microchip.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12can: mcp251xfd: rx: prepare to workaround broken RX FIFO head index erratumMarc Kleine-Budde
[ Upstream commit 85505e585637a737e4713c1386c30e37c325b82e ] This is a preparatory patch to work around erratum DS80000789E 6 of the mcp2518fd, the other variants of the chip family (mcp2517fd and mcp251863) are probably also affected. When handling the RX interrupt, the driver iterates over all pending FIFOs (which are implemented as ring buffers in hardware) and reads the FIFO header index from the RX FIFO STA register of the chip. In the bad case, the driver reads a too large head index. In the original code, the driver always trusted the read value, which caused old CAN frames that were already processed, or new, incompletely written CAN frames to be (re-)processed. Instead of reading and trusting the head index, read the head index and calculate the number of CAN frames that were supposedly received - replace mcp251xfd_rx_ring_update() with mcp251xfd_get_rx_len(). The mcp251xfd_handle_rxif_ring() function reads the received CAN frames from the chip, iterates over them and pushes them into the network stack. Prepare that the iteration can be stopped if an old CAN frame is detected. The actual code to detect old or incomplete frames and abort will be added in the next patch. Link: https://lore.kernel.org/all/BL3PR11MB64844C1C95CA3BDADAE4D8CCFBC99@BL3PR11MB6484.namprd11.prod.outlook.com Reported-by: Stefan Althöfer <Stefan.Althoefer@janztec.com> Closes: https://lore.kernel.org/all/FR0P281MB1966273C216630B120ABB6E197E89@FR0P281MB1966.DEUP281.PROD.OUTLOOK.COM Tested-by: Stefan Althöfer <Stefan.Althoefer@janztec.com> Tested-by: Thomas Kopp <thomas.kopp@microchip.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12can: mcp251xfd: mcp251xfd_handle_rxif_ring_uinc(): factor out in separate ↵Marc Kleine-Budde
function [ Upstream commit d49184b7b585f9da7ee546b744525f62117019f6 ] This is a preparation patch. Sending the UINC messages followed by incrementing the tail pointer will be called in more than one place in upcoming patches, so factor this out into a separate function. Also make mcp251xfd_handle_rxif_ring_uinc() safe to be called with a "len" of 0. Tested-by: Stefan Althöfer <Stefan.Althoefer@janztec.com> Tested-by: Thomas Kopp <thomas.kopp@microchip.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12arm64: acpi: Harden get_cpu_for_acpi_id() against missing CPU entryJonathan Cameron
[ Upstream commit 2488444274c70038eb6b686cba5f1ce48ebb9cdd ] In a review discussion of the changes to support vCPU hotplug where a check was added on the GICC being enabled if was online, it was noted that there is need to map back to the cpu and use that to index into a cpumask. As such, a valid ID is needed. If an MPIDR check fails in acpi_map_gic_cpu_interface() it is possible for the entry in cpu_madt_gicc[cpu] == NULL. This function would then cause a NULL pointer dereference. Whilst a path to trigger this has not been established, harden this caller against the possibility. Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240529133446.28446-13-Jonathan.Cameron@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12arm64: acpi: Move get_cpu_for_acpi_id() to a headerJames Morse
[ Upstream commit 8d34b6f17b9ac93faa2791eb037dcb08bdf755de ] ACPI identifies CPUs by UID. get_cpu_for_acpi_id() maps the ACPI UID to the Linux CPU number. The helper to retrieve this mapping is only available in arm64's NUMA code. Move it to live next to get_acpi_id_for_cpu(). Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Tested-by: Miguel Luis <miguel.luis@oracle.com> Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com> Tested-by: Jianyong Wu <jianyong.wu@arm.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Link: https://lore.kernel.org/r/20240529133446.28446-12-Jonathan.Cameron@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12ACPI: processor: Fix memory leaks in error paths of processor_add()Jonathan Cameron
[ Upstream commit 47ec9b417ed9b6b8ec2a941cd84d9de62adc358a ] If acpi_processor_get_info() returned an error, pr and the associated pr->throttling.shared_cpu_map were leaked. The unwind code was in the wrong order wrt to setup, relying on some unwind actions having no affect (clearing variables that were never set etc). That makes it harder to reason about so reorder and add appropriate labels to only undo what was actually set up in the first place. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240529133446.28446-6-Jonathan.Cameron@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12ACPI: processor: Return an error if acpi_processor_get_info() fails in ↵Jonathan Cameron
processor_add() [ Upstream commit fadf231f0a06a6748a7fc4a2c29ac9ef7bca6bfd ] Rafael observed [1] that returning 0 from processor_add() will result in acpi_default_enumeration() being called which will attempt to create a platform device, but that makes little sense when the processor is known to be not available. So just return the error code from acpi_processor_get_info() instead. Link: https://lore.kernel.org/all/CAJZ5v0iKU8ra9jR+EmgxbuNm=Uwx2m1-8vn_RAZ+aCiUVLe3Pw@mail.gmail.com/ [1] Suggested-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240529133446.28446-5-Jonathan.Cameron@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12workqueue: Improve scalability of workqueue watchdog touchNicholas Piggin
[ Upstream commit 98f887f820c993e05a12e8aa816c80b8661d4c87 ] On a ~2000 CPU powerpc system, hard lockups have been observed in the workqueue code when stop_machine runs (in this case due to CPU hotplug). This is due to lots of CPUs spinning in multi_cpu_stop, calling touch_nmi_watchdog() which ends up calling wq_watchdog_touch(). wq_watchdog_touch() writes to the global variable wq_watchdog_touched, and that can find itself in the same cacheline as other important workqueue data, which slows down operations to the point of lockups. In the case of the following abridged trace, worker_pool_idr was in the hot line, causing the lockups to always appear at idr_find. watchdog: CPU 1125 self-detected hard LOCKUP @ idr_find Call Trace: get_work_pool __queue_work call_timer_fn run_timer_softirq __do_softirq do_softirq_own_stack irq_exit timer_interrupt decrementer_common_virt * interrupt: 900 (timer) at multi_cpu_stop multi_cpu_stop cpu_stopper_thread smpboot_thread_fn kthread Fix this by having wq_watchdog_touch() only write to the line if the last time a touch was recorded exceeds 1/4 of the watchdog threshold. Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12workqueue: wq_watchdog_touch is always called with valid CPUNicholas Piggin
[ Upstream commit 18e24deb1cc92f2068ce7434a94233741fbd7771 ] Warn in the case it is called with cpu == -1. This does not appear to happen anywhere. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanupSouradeep Chakrabarti
[ Upstream commit b6ecc662037694488bfff7c9fd21c405df8411f2 ] Currently napi_disable() gets called during rxq and txq cleanup, even before napi is enabled and hrtimer is initialized. It causes kernel panic. ? page_fault_oops+0x136/0x2b0 ? page_counter_cancel+0x2e/0x80 ? do_user_addr_fault+0x2f2/0x640 ? refill_obj_stock+0xc4/0x110 ? exc_page_fault+0x71/0x160 ? asm_exc_page_fault+0x27/0x30 ? __mmdrop+0x10/0x180 ? __mmdrop+0xec/0x180 ? hrtimer_active+0xd/0x50 hrtimer_try_to_cancel+0x2c/0xf0 hrtimer_cancel+0x15/0x30 napi_disable+0x65/0x90 mana_destroy_rxq+0x4c/0x2f0 mana_create_rxq.isra.0+0x56c/0x6d0 ? mana_uncfg_vport+0x50/0x50 mana_alloc_queues+0x21b/0x320 ? skb_dequeue+0x5f/0x80 Cc: stable@vger.kernel.org Fixes: e1b5683ff62e ("net: mana: Move NAPI from EQ to CQ") Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12fuse: fix memory leak in fuse_create_openyangyun
[ Upstream commit 3002240d16494d798add0575e8ba1f284258ab34 ] The memory of struct fuse_file is allocated but not freed when get_create_ext return error. Fixes: 3e2b6fdbdc9a ("fuse: send security context of inode on file") Cc: stable@vger.kernel.org # v5.17 Signed-off-by: yangyun <yangyun50@huawei.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12fuse: add request extensionMiklos Szeredi
[ Upstream commit 15d937d7ca8c55d2b0ce9116e20c780fdd0b67cc ] Will need to add supplementary groups to create messages, so add the general concept of a request extension. A request extension is appended to the end of the main request. It has a header indicating the size and type of the extension. The create security context (fuse_secctx_*) is similar to the generic request extension, so include that as well in a backward compatible manner. Add the total extension length to the request header. The offset of the extension block within the request can be calculated by: inh->len - inh->total_extlen * 8 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Stable-dep-of: 3002240d1649 ("fuse: fix memory leak in fuse_create_open") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12fuse: allow non-extending parallel direct writes on the same fileDharmendra Singh
[ Upstream commit 153524053bbb0d27bb2e0be36d1b46862e9ce74c ] In general, as of now, in FUSE, direct writes on the same file are serialized over inode lock i.e we hold inode lock for the full duration of the write request. I could not find in fuse code and git history a comment which clearly explains why this exclusive lock is taken for direct writes. Following might be the reasons for acquiring an exclusive lock but not be limited to 1) Our guess is some USER space fuse implementations might be relying on this lock for serialization. 2) The lock protects against file read/write size races. 3) Ruling out any issues arising from partial write failures. This patch relaxes the exclusive lock for direct non-extending writes only. File size extending writes might not need the lock either, but we are not entirely sure if there is a risk to introduce any kind of regression. Furthermore, benchmarking with fio does not show a difference between patch versions that take on file size extension a) an exclusive lock and b) a shared lock. A possible example of an issue with i_size extending writes are write error cases. Some writes might succeed and others might fail for file system internal reasons - for example ENOSPACE. With parallel file size extending writes it _might_ be difficult to revert the action of the failing write, especially to restore the right i_size. With these changes, we allow non-extending parallel direct writes on the same file with the help of a flag called FOPEN_PARALLEL_DIRECT_WRITES. If this flag is set on the file (flag is passed from libfuse to fuse kernel as part of file open/create), we do not take exclusive lock anymore, but instead use a shared lock that allows non-extending writes to run in parallel. FUSE implementations which rely on this inode lock for serialization can continue to do so and serialized direct writes are still the default. Implementations that do not do write serialization need to be updated and need to set the FOPEN_PARALLEL_DIRECT_WRITES flag in their file open/create reply. On patch review there were concerns that network file systems (or vfs multiple mounts of the same file system) might have issues with parallel writes. We believe this is not the case, as this is just a local lock, which network file systems could not rely on anyway. I.e. this lock is just for local consistency. Signed-off-by: Dharmendra Singh <dsingh@ddn.com> Signed-off-by: Bernd Schubert <bschubert@ddn.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Stable-dep-of: 3002240d1649 ("fuse: fix memory leak in fuse_create_open") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12fuse: add "expire only" mode to FUSE_NOTIFY_INVAL_ENTRYMiklos Szeredi
[ Upstream commit 4f8d37020e1fd0bf6ee9381ba918135ef3712efd ] Add a flag to entry expiration that lets the filesystem expire a dentry without kicking it out from the cache immediately. This makes a difference for overmounted dentries, where plain invalidation would detach all submounts before dropping the dentry from the cache. If only expiry is set on the dentry, then any overmounts are left alone and until ->d_revalidate() is called. Note: ->d_revalidate() is not called for the case of following a submount, so invalidation will only be triggered for the non-overmounted case. The dentry could also be mounted in a different mount instance, in which case any submounts will still be detached. Suggested-by: Jakob Blomer <jblomer@cern.ch> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Stable-dep-of: 3002240d1649 ("fuse: fix memory leak in fuse_create_open") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12perf/aux: Fix AUX buffer serializationPeter Zijlstra
commit 2ab9d830262c132ab5db2f571003d80850d56b2a upstream. Ole reported that event->mmap_mutex is strictly insufficient to serialize the AUX buffer, add a per RB mutex to fully serialize it. Note that in the lock order comment the perf_event::mmap_mutex order was already wrong, that is, it nesting under mmap_lock is not new with this patch. Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams") Reported-by: Ole <ole@binarygecko.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12uprobes: Use kzalloc to allocate xol areaSven Schnelle
commit e240b0fde52f33670d1336697c22d90a4fe33c84 upstream. To prevent unitialized members, use kzalloc to allocate the xol area. Fixes: b059a453b1cf1 ("x86/vdso: Add mremap hook to vm_special_mapping") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Link: https://lore.kernel.org/r/20240903102313.3402529-1-svens@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12clocksource/drivers/timer-of: Remove percpu irq related codeDaniel Lezcano
commit 471ef0b5a8aaca4296108e756b970acfc499ede4 upstream. GCC's named address space checks errors out with: drivers/clocksource/timer-of.c: In function ‘timer_of_irq_exit’: drivers/clocksource/timer-of.c:29:46: error: passing argument 2 of ‘free_percpu_irq’ from pointer to non-enclosed address space 29 | free_percpu_irq(of_irq->irq, clkevt); | ^~~~~~ In file included from drivers/clocksource/timer-of.c:8: ./include/linux/interrupt.h:201:43: note: expected ‘__seg_gs void *’ but argument is of type ‘struct clock_event_device *’ 201 | extern void free_percpu_irq(unsigned int, void __percpu *); | ^~~~~~~~~~~~~~~ drivers/clocksource/timer-of.c: In function ‘timer_of_irq_init’: drivers/clocksource/timer-of.c:74:51: error: passing argument 4 of ‘request_percpu_irq’ from pointer to non-enclosed address space 74 | np->full_name, clkevt) : | ^~~~~~ ./include/linux/interrupt.h:190:56: note: expected ‘__seg_gs void *’ but argument is of type ‘struct clock_event_device *’ 190 | const char *devname, void __percpu *percpu_dev_id) Sparse warns about: timer-of.c:29:46: warning: incorrect type in argument 2 (different address spaces) timer-of.c:29:46: expected void [noderef] __percpu * timer-of.c:29:46: got struct clock_event_device *clkevt timer-of.c:74:51: warning: incorrect type in argument 4 (different address spaces) timer-of.c:74:51: expected void [noderef] __percpu *percpu_dev_id timer-of.c:74:51: got struct clock_event_device *clkevt It appears the code is incorrect as reported by Uros Bizjak: "The referred code is questionable as it tries to reuse the clkevent pointer once as percpu pointer and once as generic pointer, which should be avoided." This change removes the percpu related code as no drivers is using it. [Daniel: Fixed the description] Fixes: dc11bae785295 ("clocksource/drivers: Add timer-of common init routine") Reported-by: Uros Bizjak <ubizjak@gmail.com> Tested-by: Uros Bizjak <ubizjak@gmail.com> Link: https://lore.kernel.org/r/20240819100335.2394751-1-daniel.lezcano@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12clocksource/drivers/imx-tpm: Fix next event not taking effect sometimeJacky Bai
commit 3d5c2f8e75a55cfb11a85086c71996af0354a1fb upstream. The value written into the TPM CnV can only be updated into the hardware when the counter increases. Additional writes to the CnV write buffer are ignored until the register has been updated. Therefore, we need to check if the CnV has been updated before continuing. This may require waiting for 1 counter cycle in the worst case. Cc: stable@vger.kernel.org Fixes: 059ab7b82eec ("clocksource/drivers/imx-tpm: Add imx tpm timer support") Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Jason Liu <jason.hui.liu@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20240725193355.1436005-2-Frank.Li@nxp.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12clocksource/drivers/imx-tpm: Fix return -ETIME when delta exceeds INT_MAXJacky Bai
commit 5b8843fcd49827813da80c0f590a17ae4ce93c5d upstream. In tpm_set_next_event(delta), return -ETIME by wrong cast to int when delta is larger than INT_MAX. For example: tpm_set_next_event(delta = 0xffff_fffe) { ... next = tpm_read_counter(); // assume next is 0x10 next += delta; // next will 0xffff_fffe + 0x10 = 0x1_0000_000e now = tpm_read_counter(); // now is 0x10 ... return (int)(next - now) <= 0 ? -ETIME : 0; ^^^^^^^^^^ 0x1_0000_000e - 0x10 = 0xffff_fffe, which is -2 when cast to int. So return -ETIME. } To fix this, introduce a 'prev' variable and check if 'now - prev' is larger than delta. Cc: stable@vger.kernel.org Fixes: 059ab7b82eec ("clocksource/drivers/imx-tpm: Add imx tpm timer support") Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Jason Liu <jason.hui.liu@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20240725193355.1436005-1-Frank.Li@nxp.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12VMCI: Fix use-after-free when removing resource in vmci_resource_remove()David Fernandez Gonzalez
commit 48b9a8dabcc3cf5f961b2ebcd8933bf9204babb7 upstream. When removing a resource from vmci_resource_table in vmci_resource_remove(), the search is performed using the resource handle by comparing context and resource fields. It is possible though to create two resources with different types but same handle (same context and resource fields). When trying to remove one of the resources, vmci_resource_remove() may not remove the intended one, but the object will still be freed as in the case of the datagram type in vmci_datagram_destroy_handle(). vmci_resource_table will still hold a pointer to this freed resource leading to a use-after-free vulnerability. BUG: KASAN: use-after-free in vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] BUG: KASAN: use-after-free in vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 Read of size 4 at addr ffff88801c16d800 by task syz-executor197/1592 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106 print_address_description.constprop.0+0x21/0x366 mm/kasan/report.c:239 __kasan_report.cold+0x7f/0x132 mm/kasan/report.c:425 kasan_report+0x38/0x51 mm/kasan/report.c:442 vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 vmci_qp_broker_detach+0x89a/0x11b9 drivers/misc/vmw_vmci/vmci_queue_pair.c:2182 ctx_free_ctx+0x473/0xbe1 drivers/misc/vmw_vmci/vmci_context.c:444 kref_put include/linux/kref.h:65 [inline] vmci_ctx_put drivers/misc/vmw_vmci/vmci_context.c:497 [inline] vmci_ctx_destroy+0x170/0x1d6 drivers/misc/vmw_vmci/vmci_context.c:195 vmci_host_close+0x125/0x1ac drivers/misc/vmw_vmci/vmci_host.c:143 __fput+0x261/0xa34 fs/file_table.c:282 task_work_run+0xf0/0x194 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop+0x184/0x189 kernel/entry/common.c:187 exit_to_user_mode_prepare+0x11b/0x123 kernel/entry/common.c:220 __syscall_exit_to_user_mode_work kernel/entry/common.c:302 [inline] syscall_exit_to_user_mode+0x18/0x42 kernel/entry/common.c:313 do_syscall_64+0x41/0x85 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x6e/0x0 This change ensures the type is also checked when removing the resource from vmci_resource_table in vmci_resource_remove(). Fixes: bc63dedb7d46 ("VMCI: resource object implementation.") Cc: stable@vger.kernel.org Reported-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: David Fernandez Gonzalez <david.fernandez.gonzalez@oracle.com> Link: https://lore.kernel.org/r/20240828154338.754746-1-david.fernandez.gonzalez@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12Drivers: hv: vmbus: Fix rescind handling in uio_hv_genericNaman Jain
commit 6fd28941447bf2c8ca0f26fda612a1cabc41663f upstream. Rescind offer handling relies on rescind callbacks for some of the resources cleanup, if they are registered. It does not unregister vmbus device for the primary channel closure, when callback is registered. Without it, next onoffer does not come, rescind flag remains set and device goes to unusable state. Add logic to unregister vmbus for the primary channel in rescind callback to ensure channel removal and relid release, and to ensure that next onoffer can be received and handled properly. Cc: stable@vger.kernel.org Fixes: ca3cda6fcf1e ("uio_hv_generic: add rescind support") Signed-off-by: Naman Jain <namjain@linux.microsoft.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Link: https://lore.kernel.org/r/20240829071312.1595-3-namjain@linux.microsoft.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescindSaurabh Sengar
commit fb1adbd7e50f3d2de56d0a2bb0700e2e819a329e upstream. For primary VM Bus channels, primary_channel pointer is always NULL. This pointer is valid only for the secondary channels. Also, rescind callback is meant for primary channels only. Fix NULL pointer dereference by retrieving the device_obj from the parent for the primary channel. Cc: stable@vger.kernel.org Fixes: ca3cda6fcf1e ("uio_hv_generic: add rescind support") Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Signed-off-by: Naman Jain <namjain@linux.microsoft.com> Link: https://lore.kernel.org/r/20240829071312.1595-2-namjain@linux.microsoft.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12nvmem: Fix return type of devm_nvmem_device_get() in kerneldocGeert Uytterhoeven
commit c69f37f6559a8948d70badd2b179db7714dedd62 upstream. devm_nvmem_device_get() returns an nvmem device, not an nvmem cell. Fixes: e2a5402ec7c6d044 ("nvmem: Add nvmem_device based consumer apis.") Cc: stable <stable@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20240902142510.71096-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12binder: fix UAF caused by offsets overwriteCarlos Llamas
commit 4df153652cc46545722879415937582028c18af5 upstream. Binder objects are processed and copied individually into the target buffer during transactions. Any raw data in-between these objects is copied as well. However, this raw data copy lacks an out-of-bounds check. If the raw data exceeds the data section size then the copy overwrites the offsets section. This eventually triggers an error that attempts to unwind the processed objects. However, at this point the offsets used to index these objects are now corrupted. Unwinding with corrupted offsets can result in decrements of arbitrary nodes and lead to their premature release. Other users of such nodes are left with a dangling pointer triggering a use-after-free. This issue is made evident by the following KASAN report (trimmed): ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c Write of size 4 at addr ffff47fc91598f04 by task binder-util/743 CPU: 9 UID: 0 PID: 743 Comm: binder-util Not tainted 6.11.0-rc4 #1 Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x19c binder_free_buf+0x128/0x434 binder_thread_write+0x8a4/0x3260 binder_ioctl+0x18f0/0x258c [...] Allocated by task 743: __kmalloc_cache_noprof+0x110/0x270 binder_new_node+0x50/0x700 binder_transaction+0x413c/0x6da8 binder_thread_write+0x978/0x3260 binder_ioctl+0x18f0/0x258c [...] Freed by task 745: kfree+0xbc/0x208 binder_thread_read+0x1c5c/0x37d4 binder_ioctl+0x16d8/0x258c [...] ================================================================== To avoid this issue, let's check that the raw data copy is within the boundaries of the data section. Fixes: 6d98eb95b450 ("binder: avoid potential data leakage when copying txn") Cc: Todd Kjos <tkjos@google.com> Cc: stable@vger.kernel.org Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20240822182353.2129600-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12usb: dwc3: core: update LC timer as per USB Spec V3.2Faisal Hassan
commit 9149c9b0c7e046273141e41eebd8a517416144ac upstream. This fix addresses STAR 9001285599, which only affects DWC_usb3 version 3.20a. The timer value for PM_LC_TIMER in DWC_usb3 3.20a for the Link ECN changes is incorrect. If the PM TIMER ECN is enabled via GUCTL2[19], the link compliance test (TD7.21) may fail. If the ECN is not enabled (GUCTL2[19] = 0), the controller will use the old timer value (5us), which is still acceptable for the link compliance test. Therefore, clear GUCTL2[19] to pass the USB link compliance test: TD 7.21. Cc: stable@vger.kernel.org Signed-off-by: Faisal Hassan <quic_faisalh@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240829094502.26502-1-quic_faisalh@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12iio: adc: ad7124: fix chip ID mismatchDumitru Ceclan
commit 96f9ab0d5933c1c00142dd052f259fce0bc3ced2 upstream. The ad7124_soft_reset() function has the assumption that the chip will assert the "power-on reset" bit in the STATUS register after a software reset without any delay. The POR bit =0 is used to check if the chip initialization is done. A chip ID mismatch probe error appears intermittently when the probe continues too soon and the ID register does not contain the expected value. Fix by adding a 200us delay after the software reset command is issued. Fixes: b3af341bbd96 ("iio: adc: Add ad7124 support") Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20240731-ad7124-fix-v1-1-46a76aa4b9be@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12iio: adc: ad7606: remove frstdata check for serial modeGuillaume Stols
commit 90826e08468ba7fb35d8b39645b22d9e80004afe upstream. The current implementation attempts to recover from an eventual glitch in the clock by checking frstdata state after reading the first channel's sample: If frstdata is low, it will reset the chip and return -EIO. This will only work in parallel mode, where frstdata pin is set low after the 2nd sample read starts. For the serial mode, according to the datasheet, "The FRSTDATA output returns to a logic low following the 16th SCLK falling edge.", thus after the Xth pulse, X being the number of bits in a sample, the check will always be true, and the driver will not work at all in serial mode if frstdata(optional) is defined in the devicetree as it will reset the chip, and return -EIO every time read_sample is called. Hence, this check must be removed for serial mode. Fixes: b9618c0cacd7 ("staging: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4") Signed-off-by: Guillaume Stols <gstols@baylibre.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20240702-cleanup-ad7606-v3-1-18d5ea18770e@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12iio: adc: ad7124: fix config comparisonDumitru Ceclan
commit 2f6b92d0f69f04d9e2ea0db1228ab7f82f3173af upstream. The ad7124_find_similar_live_cfg() computes the compare size by substracting the address of the cfg struct from the address of the live field. Because the live field is the first field in the struct, the result is 0. Also, the memcmp() call is made from the start of the cfg struct, which includes the live and cfg_slot fields, which are not relevant for the comparison. Fix by grouping the relevant fields with struct_group() and use the size of the group to compute the compare size; make the memcmp() call from the address of the group. Fixes: 7b8d045e497a ("iio: adc: ad7124: allow more than 8 channels") Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20240731-ad7124-fix-v1-2-46a76aa4b9be@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12iio: fix scale application in iio_convert_raw_to_processed_unlockedMatteo Martelli
commit 8a3dcc970dc57b358c8db2702447bf0af4e0d83a upstream. When the scale_type is IIO_VAL_INT_PLUS_MICRO or IIO_VAL_INT_PLUS_NANO the scale passed as argument is only applied to the fractional part of the value. Fix it by also multiplying the integer part by the scale provided. Fixes: 48e44ce0f881 ("iio:inkern: Add function to read the processed value") Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com> Link: https://patch.msgid.link/20240730-iio-fix-scale-v1-1-6246638c8daa@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12iio: buffer-dmaengine: fix releasing dma channel on errorDavid Lechner
commit 84c65d8008764a8fb4e627ff02de01ec4245f2c4 upstream. If dma_get_slave_caps() fails, we need to release the dma channel before returning an error to avoid leaking the channel. Fixes: 2d6ca60f3284 ("iio: Add a DMAengine framework based buffer") Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20240723-iio-fix-dmaengine-free-on-error-v1-1-2c7cbc9b92ff@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12staging: iio: frequency: ad9834: Validate frequency parameter valueAleksandr Mishin
commit b48aa991758999d4e8f9296c5bbe388f293ef465 upstream. In ad9834_write_frequency() clk_get_rate() can return 0. In such case ad9834_calc_freqreg() call will lead to division by zero. Checking 'if (fout > (clk_freq / 2))' doesn't protect in case of 'fout' is 0. ad9834_write_frequency() is called from ad9834_write(), where fout is taken from text buffer, which can contain any value. Modify parameters checking. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 12b9d5bf76bf ("Staging: IIO: DDS: AD9833 / AD9834 driver") Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/20240703154506.25584-1-amishin@t-argos.ru Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12tcp: process the 3rd ACK with sk_socket for TFO/MPTCPMatthieu Baerts (NGI0)
commit c1668292689ad2ee16c9c1750a8044b0b0aad663 upstream. The 'Fixes' commit recently changed the behaviour of TCP by skipping the processing of the 3rd ACK when a sk->sk_socket is set. The goal was to skip tcp_ack_snd_check() in tcp_rcv_state_process() not to send an unnecessary ACK in case of simultaneous connect(). Unfortunately, that had an impact on TFO and MPTCP. I started to look at the impact on MPTCP, because the MPTCP CI found some issues with the MPTCP Packetdrill tests [1]. Then Paolo Abeni suggested me to look at the impact on TFO with "plain" TCP. For MPTCP, when receiving the 3rd ACK of a request adding a new path (MP_JOIN), sk->sk_socket will be set, and point to the MPTCP sock that has been created when the MPTCP connection got established before with the first path. The newly added 'goto' will then skip the processing of the segment text (step 7) and not go through tcp_data_queue() where the MPTCP options are validated, and some actions are triggered, e.g. sending the MPJ 4th ACK [2] as demonstrated by the new errors when running a packetdrill test [3] establishing a second subflow. This doesn't fully break MPTCP, mainly the 4th MPJ ACK that will be delayed. Still, we don't want to have this behaviour as it delays the switch to the fully established mode, and invalid MPTCP options in this 3rd ACK will not be caught any more. This modification also affects the MPTCP + TFO feature as well, and being the reason why the selftests started to be unstable the last few days [4]. For TFO, the existing 'basic-cookie-not-reqd' test [5] was no longer passing: if the 3rd ACK contains data, and the connection is accept()ed before receiving them, these data would no longer be processed, and thus not ACKed. One last thing about MPTCP, in case of simultaneous connect(), a fallback to TCP will be done, which seems fine: `../common/defaults.sh` 0 socket(..., SOCK_STREAM|SOCK_NONBLOCK, IPPROTO_MPTCP) = 3 +0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) +0 > S 0:0(0) <mss 1460, sackOK, TS val 100 ecr 0, nop, wscale 8, mpcapable v1 flags[flag_h] nokey> +0 < S 0:0(0) win 1000 <mss 1460, sackOK, TS val 407 ecr 0, nop, wscale 8, mpcapable v1 flags[flag_h] nokey> +0 > S. 0:0(0) ack 1 <mss 1460, sackOK, TS val 330 ecr 0, nop, wscale 8, mpcapable v1 flags[flag_h] nokey> +0 < S. 0:0(0) ack 1 win 65535 <mss 1460, sackOK, TS val 700 ecr 100, nop, wscale 8, mpcapable v1 flags[flag_h] key[skey=2]> +0 > . 1:1(0) ack 1 <nop, nop, TS val 845707014 ecr 700, nop, nop, sack 0:1> Simultaneous SYN-data crossing is also not supported by TFO, see [6]. Kuniyuki Iwashima suggested to restrict the processing to SYN+ACK only: that's a more generic solution than the one initially proposed, and also enough to fix the issues described above. Later on, Eric Dumazet mentioned that an ACK should still be sent in reaction to the second SYN+ACK that is received: not sending a DUPACK here seems wrong and could hurt: 0 socket(..., SOCK_STREAM|SOCK_NONBLOCK, IPPROTO_TCP) = 3 +0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) +0 > S 0:0(0) <mss 1460, sackOK, TS val 1000 ecr 0,nop,wscale 8> +0 < S 0:0(0) win 1000 <mss 1000, sackOK, nop, nop> +0 > S. 0:0(0) ack 1 <mss 1460, sackOK, TS val 3308134035 ecr 0,nop,wscale 8> +0 < S. 0:0(0) ack 1 win 1000 <mss 1000, sackOK, nop, nop> +0 > . 1:1(0) ack 1 <nop, nop, sack 0:1> // <== Here So in this version, the 'goto consume' is dropped, to always send an ACK when switching from TCP_SYN_RECV to TCP_ESTABLISHED. This ACK will be seen as a DUPACK -- with DSACK if SACK has been negotiated -- in case of simultaneous SYN crossing: that's what is expected here. Link: https://github.com/multipath-tcp/mptcp_net-next/actions/runs/9936227696 [1] Link: https://datatracker.ietf.org/doc/html/rfc8684#fig_tokens [2] Link: https://github.com/multipath-tcp/packetdrill/blob/mptcp-net-next/gtests/net/mptcp/syscalls/accept.pkt#L28 [3] Link: https://netdev.bots.linux.dev/contest.html?executor=vmksft-mptcp-dbg&test=mptcp-connect-sh [4] Link: https://github.com/google/packetdrill/blob/master/gtests/net/tcp/fastopen/server/basic-cookie-not-reqd.pkt#L21 [5] Link: https://github.com/google/packetdrill/blob/master/gtests/net/tcp/fastopen/client/simultaneous-fast-open.pkt [6] Fixes: 23e89e8ee7be ("tcp: Don't drop SYN+ACK for simultaneous connect().") Suggested-by: Paolo Abeni <pabeni@redhat.com> Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com> Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240724-upstream-net-next-20240716-tcp-3rd-ack-consume-sk_socket-v3-1-d48339764ce9@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12io_uring/sqpoll: Do not set PF_NO_SETAFFINITY on sqpoll threadsMichal Koutný
commit a5fc1441af7719e93dc7a638a960befb694ade89 upstream. Users may specify a CPU where the sqpoll thread would run. This may conflict with cpuset operations because of strict PF_NO_SETAFFINITY requirement. That flag is unnecessary for polling "kernel" threads, see the reasoning in commit 01e68ce08a30 ("io_uring/io-wq: stop setting PF_NO_SETAFFINITY on io-wq workers"). Drop the flag on poll threads too. Fixes: 01e68ce08a30 ("io_uring/io-wq: stop setting PF_NO_SETAFFINITY on io-wq workers") Link: https://lore.kernel.org/all/20230314162559.pnyxdllzgw7jozgx@blackpad/ Signed-off-by: Michal Koutný <mkoutny@suse.com> Link: https://lore.kernel.org/r/20230314183332.25834-1-mkoutny@suse.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12io_uring/io-wq: stop setting PF_NO_SETAFFINITY on io-wq workersJens Axboe
commit 01e68ce08a30db3d842ce7a55f7f6e0474a55f9a upstream. Every now and then reports come in that are puzzled on why changing affinity on the io-wq workers fails with EINVAL. This happens because they set PF_NO_SETAFFINITY as part of their creation, as io-wq organizes workers into groups based on what CPU they are running on. However, this is purely an optimization and not a functional requirement. We can allow setting affinity, and just lazily update our worker to wqe mappings. If a given io-wq thread times out, it normally exits if there's no more work to do. The exception is if it's the last worker available. For the timeout case, check the affinity of the worker against group mask and exit even if it's the last worker. New workers should be created with the right mask and in the right location. Reported-by:Daniel Dao <dqminh@cloudflare.com> Link: https://lore.kernel.org/io-uring/CA+wXwBQwgxB3_UphSny-yAP5b26meeOu1W4TwYVcD_+5gOhvPw@mail.gmail.com/ Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12selftests: mptcp: join: check re-re-adding ID 0 signalMatthieu Baerts (NGI0)
commit f18fa2abf81099d822d842a107f8c9889c86043c upstream. This test extends "delete re-add signal" to validate the previous commit: when the 'signal' endpoint linked to the initial subflow (ID 0) is re-added multiple times, it will re-send the ADD_ADDR with id 0. The client should still be able to re-create this subflow, even if the add_addr_accepted limit has been reached as this special address is not considered as a new address. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: d0876b2284cf ("mptcp: add the incoming RM_ADDR support") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> [ Conflicts in mptcp_join.sh, because the helpers are different in this version: - run_tests has been modified a few times to reduce the number of positional parameters - no chk_mptcp_info helper - chk_subflow_nr taking an extra parameter - kill_tests_wait instead of mptcp_lib_kill_wait ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12selftests: mptcp: join: validate event numbersMatthieu Baerts (NGI0)
commit 20ccc7c5f7a3aa48092441a4b182f9f40418392e upstream. This test extends "delete and re-add" and "delete re-add signal" to validate the previous commit: the number of MPTCP events are checked to make sure there are no duplicated or unexpected ones. A new helper has been introduced to easily check these events. The missing events have been added to the lib. The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: b911c97c7dc7 ("mptcp: add netlink event support") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> [ Conflicts in mptcp_join.sh and mptcp_lib.sh, due to commit 38f027fca1b7 ("selftests: mptcp: dump userspace addrs list") -- linked to a new feature, not backportable to stable -- and commit 23a0485d1c04 ("selftests: mptcp: declare event macros in mptcp_lib") -- depending on the previous one -- not in this version. The conflicts in mptcp_join.sh were in the context, because a new helper had to be added after others that are not in this version. The conflicts in mptcp_lib.sh were due to the fact the other MPTCP_LIB_EVENT_* constants were not present. They have all been added in this version to ease future backports if any. In this version, it was also needed to import reset_with_events and kill_events_pids from the newer version, and adapt chk_evt_nr to how the results are printed in this version, plus remove the LISTENER events checks because the linked feature is not available in this kernel version. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12selftests: mptcp: fix backport issuesMatthieu Baerts (NGI0)
By accident, some patches modifying the MPTCP selftests have been applied twice, using different versions of the patch [1]. These patches have been dropped, but it looks like quilt incorrectly handled that by placing the new subtests at the wrong place: in userspace_tests() instead of endpoint_tests(). That caused a few other patches not to apply properly. Not to have to revert and re-apply patches, this issue can be fixed by moving some code around. Link: https://lore.kernel.org/fc21db4a-508d-41db-aa45-e3bc06d18ce7@kernel.org [1] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12NFSv4: Add missing rescheduling points in nfs_client_return_marked_delegationsTrond Myklebust
[ Upstream commit a017ad1313fc91bdf235097fd0a02f673fc7bb11 ] We're seeing reports of soft lockups when iterating through the loops, so let's add rescheduling points. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12ata: pata_macio: Use WARN instead of BUGMichael Ellerman
[ Upstream commit d4bc0a264fb482b019c84fbc7202dd3cab059087 ] The overflow/underflow conditions in pata_macio_qc_prep() should never happen. But if they do there's no need to kill the system entirely, a WARN and failing the IO request should be sufficient and might allow the system to keep running. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installedJiaxun Yang
[ Upstream commit 50f2b98dc83de7809a5c5bf0ccf9af2e75c37c13 ] This avoids warning: [ 0.118053] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 Caused by get_c0_compare_int on secondary CPU. We also skipped saving IRQ number to struct clock_event_device *cd as it's never used by clockevent core, as per comments it's only meant for "non CPU local devices". Reported-by: Serge Semin <fancer.lancer@gmail.com> Closes: https://lore.kernel.org/linux-mips/6szkkqxpsw26zajwysdrwplpjvhl5abpnmxgu2xuj3dkzjnvsf@4daqrz4mf44k/ Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc()Kent Overstreet
[ Upstream commit b2f11c6f3e1fc60742673b8675c95b78447f3dae ] If we need to increase the tree depth, allocate a new node, and then race with another thread that increased the tree depth before us, we'll still have a preallocated node that might be used later. If we then use that node for a new non-root node, it'll still have a pointer to the old root instead of being zeroed - fix this by zeroing it in the cmpxchg failure path. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 06:43:26 +0000