summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-21Linux 5.8.3v5.8.3Greg Kroah-Hartman
Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21drm/amd/display: dchubbub p-state warning during surface planes switchhersen wu
commit 8b0379a85762b516c7b46aed7dbf2a4947c00564 upstream. [Why] ramp_up_dispclk_with_dpp is to change dispclk, dppclk and dprefclk according to bandwidth requirement. call stack: rv1_update_clocks --> update_clocks --> dcn10_prepare_bandwidth / dcn10_optimize_bandwidth --> prepare_bandwidth / optimize_bandwidth. before change dcn hw, prepare_bandwidth will be called first to allow enough clock, watermark for change, after end of dcn hw change, optimize_bandwidth is executed to lower clock to save power for new dcn hw settings. below is sequence of commit_planes_for_stream: step 1: prepare_bandwidth - raise clock to have enough bandwidth step 2: lock_doublebuffer_enable step 3: pipe_control_lock(true) - make dchubp register change will not take effect right way step 4: apply_ctx_for_surface - program dchubp step 5: pipe_control_lock(false) - dchubp register change take effect step 6: optimize_bandwidth --> dc_post_update_surfaces_to_stream for full_date, optimize clock to save power at end of step 1, dcn clocks (dprefclk, dispclk, dppclk) may be changed for new dchubp configuration. but real dcn hub dchubps are still running with old configuration until end of step 5. this need clocks settings at step 1 should not less than that before step 1. this is checked by two conditions: 1. if (should_set_clock(safe_to_lower , new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) || new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz) 2. request_dpp_div = new_clocks->dispclk_khz > new_clocks->dppclk_khz the second condition is based on new dchubp configuration. dppclk for new dchubp may be different from dppclk before step 1. for example, before step 1, dchubps are as below: pipe 0: recout=(0,40,1920,980) viewport=(0,0,1920,979) pipe 1: recout=(0,0,1920,1080) viewport=(0,0,1920,1080) for dppclk for pipe0 need dppclk = dispclk new dchubp pipe split configuration: pipe 0: recout=(0,0,960,1080) viewport=(0,0,960,1080) pipe 1: recout=(960,0,960,1080) viewport=(960,0,960,1080) dppclk only needs dppclk = dispclk /2. dispclk, dppclk are not lock by otg master lock. they take effect after step 1. during this transition, dispclk are the same, but dppclk is changed to half of previous clock for old dchubp configuration between step 1 and step 6. This may cause p-state warning intermittently. [How] for new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz, we need make sure dppclk are not changed to less between step 1 and 6. for new_clocks->dispclk_khz > clk_mgr_base->clks.dispclk_khz, new display clock is raised, but we do not know ratio of new_clocks->dispclk_khz and clk_mgr_base->clks.dispclk_khz, new_clocks->dispclk_khz /2 does not guarantee equal or higher than old dppclk. we could ignore power saving different between dppclk = displck and dppclk = dispclk / 2 between step 1 and step 6. as long as safe_to_lower = false, set dpclk = dispclk to simplify condition check. CC: Stable <stable@vger.kernel.org> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21drm/amd/display: Fix dmesg warning from setting abm levelStylon Wang
commit c5892a10218214d729699ab61bad6fc109baf0ce upstream. [Why] Setting abm level does not correctly update CRTC state. As a result no surface update is added to dc stream state and triggers warning. [How] Correctly update CRTC state when setting abm level property. CC: Stable <stable@vger.kernel.org> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21drm/amdgpu: Fix bug where DPM is not enabled after hibernate and resumeSandeep Raghuraman
commit f87812284172a9809820d10143b573d833cd3f75 upstream. Reproducing bug report here: After hibernating and resuming, DPM is not enabled. This remains the case even if you test hibernate using the steps here: https://www.kernel.org/doc/html/latest/power/basic-pm-debugging.html I debugged the problem, and figured out that in the file hardwaremanager.c, in the function, phm_enable_dynamic_state_management(), the check 'if (!hwmgr->pp_one_vf && smum_is_dpm_running(hwmgr) && !amdgpu_passthrough(adev) && adev->in_suspend)' returns true for the hibernate case, and false for the suspend case. This means that for the hibernate case, the AMDGPU driver doesn't enable DPM (even though it should) and simply returns from that function. In the suspend case, it goes ahead and enables DPM, even though it doesn't need to. I debugged further, and found out that in the case of suspend, for the CIK/Hawaii GPUs, smum_is_dpm_running(hwmgr) returns false, while in the case of hibernate, smum_is_dpm_running(hwmgr) returns true. For CIK, the ci_is_dpm_running() function calls the ci_is_smc_ram_running() function, which is ultimately used to determine if DPM is currently enabled or not, and this seems to provide the wrong answer. I've changed the ci_is_dpm_running() function to instead use the same method that some other AMD GPU chips do (e.g Fiji), which seems to read the voltage controller. I've tested on my R9 390 and it seems to work correctly for both suspend and hibernate use cases, and has been stable so far. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208839 Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpiXin Xiong
commit a34a0a632dd991a371fec56431d73279f9c54029 upstream. drm_dp_mst_allocate_vcpi() invokes drm_dp_mst_topology_get_port_validated(), which increases the refcount of the "port". These reference counting issues take place in two exception handling paths separately. Either when “slots” is less than 0 or when drm_dp_init_vcpi() returns a negative value, the function forgets to reduce the refcnt increased drm_dp_mst_topology_get_port_validated(), which results in a refcount leak. Fix these issues by pulling up the error handling when "slots" is less than 0, and calling drm_dp_mst_topology_put_port() before termination when drm_dp_init_vcpi() returns a negative value. Fixes: 1e797f556c61 ("drm/dp: Split drm_dp_mst_allocate_vcpi") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200719154545.GA41231@xin-virtual-machine Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21drm: Added orientation quirk for ASUS tablet model T103HAFMarius Iacob
commit b5ac98cbb8e5e30c34ebc837d1e5a3982d2b5f5c upstream. Signed-off-by: Marius Iacob <themariusus@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200801123445.1514567-1-themariusus@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21drm/tidss: fix modeset init for DPI panelsTomi Valkeinen
commit a72a6a16d51034045cb6355924b62221a8221ca3 upstream. The connector type for DISPC's DPI videoport was set the LVDS instead of DPI. This causes any DPI panel setup to fail with tidss, making all DPI panels unusable. Fix this by using correct connector type. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Fixes: 32a1795f57eecc39749017 ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Cc: stable@vger.kernel.org # v5.7+ Link: https://patchwork.freedesktop.org/patch/msgid/20200604080214.107159-1-tomi.valkeinen@ti.com Reviewed-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21drm/omap: force runtime PM suspend on system suspendTomi Valkeinen
commit ecfdedd7da5d54416db5ca0f851264dca8736f59 upstream. Use SET_LATE_SYSTEM_SLEEP_PM_OPS in DSS submodules to force runtime PM suspend and resume. We use suspend late version so that omapdrm's system suspend callback is called first, as that will disable all the display outputs after which it's safe to force DSS into suspend. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200618095153.611071-1-tomi.valkeinen@ti.com Acked-by: Tony Lindgren <tony@atomide.com> Fixes: cef766300353 ("drm/omap: Prepare DSS for probing without legacy platform data") Cc: stable@vger.kernel.org # v5.7+ Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21drm/dp_mst: Fix the DDC I2C device unregistration of an MST portImre Deak
commit 7d11507605a75fcb2159b93d1fe8213b363a2c20 upstream. The WARN below triggers during the removal of an MST port. The problem is that the parent device's (the connector's kdev) sysfs directory is removed recursively when the connector is unregistered (even though the I2C device holds a reference on the parent device). To fix this set first the Peer Device Type to none which will remove the I2C device. Note that atm, inconsistently, the parent of the I2C device is initially set to the DRM kdev and after a Connection Status Notification the parent may be reset to be the connector's kdev. This problem is addressed by the next patch. [ 4462.989299] ------------[ cut here ]------------ [ 4463.014940] sysfs group 'power' not found for kobject 'i2c-24' [ 4463.034664] WARNING: CPU: 0 PID: 970 at fs/sysfs/group.c:281 sysfs_remove_group+0x71/0x80 [ 4463.044357] Modules linked in: snd_hda_intel i915 drm_kms_helper(O) drm netconsole snd_hda_codec_hdmi mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul snd_intel_dspcf g crc32_pclmul snd_hda_codec snd_hwdep ghash_clmulni_intel snd_hda_core asix usbnet kvm_intel mii i2c_algo_bit snd_pcm syscopyarea sysfillrect e1000e sysimgblt fb_sys_fops prim e_numbers ptp pps_core i2c_i801 r8169 mei_me realtek mei [last unloaded: drm] [ 4463.044399] CPU: 0 PID: 970 Comm: kworker/0:2 Tainted: G O 5.7.0+ #172 [ 4463.044402] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP [ 4463.044423] Workqueue: events drm_dp_delayed_destroy_work [drm_kms_helper] [ 4463.044428] RIP: 0010:sysfs_remove_group+0x71/0x80 [ 4463.044431] Code: 48 89 df 5b 5d 41 5c e9 cd b6 ff ff 48 89 df e8 95 b4 ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 20 0f 3f 82 e8 9f c5 d7 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 84 00 00 00 00 00 48 85 f6 74 31 41 54 [ 4463.044433] RSP: 0018:ffffc900018bfbf0 EFLAGS: 00010282 [ 4463.044436] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 [ 4463.044439] RDX: 0000000080000001 RSI: ffff88849e828f38 RDI: 00000000ffffffff [ 4463.052970] [drm:drm_atomic_get_plane_state [drm]] Added [PLANE:100:plane 2B] 00000000c2160caa state to 00000000d172564a [ 4463.070533] RBP: ffffffff820cea20 R08: ffff88847f4b8958 R09: 0000000000000000 [ 4463.070535] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88848a725018 [ 4463.070537] R13: 0000000000000000 R14: ffffffff827090e0 R15: 0000000000000002 [ 4463.070539] FS: 0000000000000000(0000) GS:ffff88849e800000(0000) knlGS:0000000000000000 [ 4463.070541] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4463.070543] CR2: 00007fdf8a756538 CR3: 0000000489684001 CR4: 0000000000760ef0 [ 4463.070545] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4463.070547] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4463.070549] PKRU: 55555554 [ 4463.070551] Call Trace: [ 4463.070560] device_del+0x84/0x400 [ 4463.070571] cdev_device_del+0x10/0x30 [ 4463.070578] put_i2c_dev+0x69/0x80 [ 4463.070584] i2cdev_detach_adapter+0x2e/0x60 [ 4463.070591] notifier_call_chain+0x34/0x90 [ 4463.070599] blocking_notifier_call_chain+0x3f/0x60 [ 4463.070606] device_del+0x7c/0x400 [ 4463.087817] ? lockdep_init_map_waits+0x57/0x210 [ 4463.087825] device_unregister+0x11/0x60 [ 4463.087829] i2c_del_adapter+0x249/0x310 [ 4463.087846] drm_dp_port_set_pdt+0x6b/0x2c0 [drm_kms_helper] [ 4463.087862] drm_dp_delayed_destroy_work+0x2af/0x350 [drm_kms_helper] [ 4463.087876] process_one_work+0x268/0x600 [ 4463.105438] ? __schedule+0x30c/0x920 [ 4463.105451] worker_thread+0x37/0x380 [ 4463.105457] ? process_one_work+0x600/0x600 [ 4463.105462] kthread+0x140/0x160 [ 4463.105466] ? kthread_park+0x80/0x80 [ 4463.105474] ret_from_fork+0x24/0x50 Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200607212522.16935-1-imre.deak@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21drm/dp_mst: Fix timeout handling of MST down messagesImre Deak
commit 58c1721787be8a6ff28b4e5b6ce395915476871e upstream. This fixes the following use-after-free problem in case an MST down message times out, while waiting for the response for it: [ 449.022841] [drm:drm_dp_mst_wait_tx_reply.isra.26] timedout msg send 0000000080ba7fa2 2 0 [ 449.022898] ------------[ cut here ]------------ [ 449.022903] list_add corruption. prev->next should be next (ffff88847dae32c0), but was 6b6b6b6b6b6b6b6b. (prev=ffff88847db1c140). [ 449.022931] WARNING: CPU: 2 PID: 22 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70 [ 449.022935] Modules linked in: asix usbnet mii snd_hda_codec_hdmi mei_hdcp i915 x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep e1000e snd_hda_core ptp snd_pcm pps_core mei_me mei intel_lpss_pci prime_numbers [ 449.022966] CPU: 2 PID: 22 Comm: kworker/2:0 Not tainted 5.7.0-rc3-CI-Patchwork_17536+ #1 [ 449.022970] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWI1.R00.2457.A16.1912270059 12/27/2019 [ 449.022976] Workqueue: events_long drm_dp_mst_link_probe_work [ 449.022982] RIP: 0010:__list_add_valid+0x4d/0x70 [ 449.022987] Code: c3 48 89 d1 48 c7 c7 f0 e7 32 82 48 89 c2 e8 3a 49 b7 ff 0f 0b 31 c0 c3 48 89 c1 4c 89 c6 48 c7 c7 40 e8 32 82 e8 23 49 b7 ff <0f> 0b 31 c0 c3 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 90 e8 32 82 e8 [ 449.022991] RSP: 0018:ffffc900001abcb0 EFLAGS: 00010286 [ 449.022995] RAX: 0000000000000000 RBX: ffff88847dae2d58 RCX: 0000000000000001 [ 449.022999] RDX: 0000000080000001 RSI: ffff88849d914978 RDI: 00000000ffffffff [ 449.023002] RBP: ffff88847dae32c0 R08: ffff88849d914978 R09: 0000000000000000 [ 449.023006] R10: ffffc900001abcb8 R11: 0000000000000000 R12: ffff888490d98400 [ 449.023009] R13: ffff88847dae3230 R14: ffff88847db1c140 R15: ffff888490d98540 [ 449.023013] FS: 0000000000000000(0000) GS:ffff88849ff00000(0000) knlGS:0000000000000000 [ 449.023017] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 449.023021] CR2: 00007fb96fafdc63 CR3: 0000000005610004 CR4: 0000000000760ee0 [ 449.023025] PKRU: 55555554 [ 449.023028] Call Trace: [ 449.023034] drm_dp_queue_down_tx+0x59/0x110 [ 449.023041] ? rcu_read_lock_sched_held+0x4d/0x80 [ 449.023050] ? kmem_cache_alloc_trace+0x2a6/0x2d0 [ 449.023060] drm_dp_send_link_address+0x74/0x870 [ 449.023065] ? __slab_free+0x3e1/0x5c0 [ 449.023071] ? lockdep_hardirqs_on+0xe0/0x1c0 [ 449.023078] ? lockdep_hardirqs_on+0xe0/0x1c0 [ 449.023097] drm_dp_check_and_send_link_address+0x9a/0xc0 [ 449.023106] drm_dp_mst_link_probe_work+0x9e/0x160 [ 449.023117] process_one_work+0x268/0x600 [ 449.023124] ? __schedule+0x307/0x8d0 [ 449.023139] worker_thread+0x37/0x380 [ 449.023149] ? process_one_work+0x600/0x600 [ 449.023153] kthread+0x140/0x160 [ 449.023159] ? kthread_park+0x80/0x80 [ 449.023169] ret_from_fork+0x24/0x50 Fixes: d308a881a591 ("drm/dp_mst: Kill the second sideband tx slot, save the world") Cc: Lyude Paul <lyude@redhat.com> Cc: Sean Paul <sean@poorly.run> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: <stable@vger.kernel.org> # v3.17+ Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200513103155.12336-1-imre.deak@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21drm/dp_mst: Fix the DDC I2C device registration of an MST portImre Deak
commit d8bd15b37d328a935a4fc695fed8b19157503950 upstream. During the initial MST probing an MST port's I2C device will be registered using the kdev of the DRM device as a parent. Later after MST Connection Status Notifications this I2C device will be re-registered with the kdev of the port's connector. This will also move inconsistently the I2C device's sysfs entry from the DRM device's sysfs dir to the connector's dir. Fix the above by keeping the DRM kdev as the parent of the I2C device. Ideally the connector's kdev would be used as a parent, similarly to non-MST connectors, however that needs some more refactoring to ensure the connector's kdev is already available early enough. So keep the existing (initial) behavior for now. Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200607212522.16935-2-imre.deak@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21drm/panfrost: Use kvfree() to free bo->sgtsDenis Efremov
commit 114427b8927a4def2942b2b886f7e4aeae289ccb upstream. Use kvfree() to free bo->sgts, because the memory is allocated with kvmalloc_array() in panfrost_mmu_map_fault_addr(). Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations") Cc: stable@vger.kernel.org Signed-off-by: Denis Efremov <efremov@linux.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200608151728.234026-1-efremov@linux.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21drm/i915/gt: Force the GT reset on shutdownChris Wilson
commit 7c4541a37bbbf83c0f16f779e85eb61d9348ed29 upstream. Before we return control to the system, and letting it reuse all the pages being accessed by HW, we must disable the HW. At the moment, we dare not reset the GPU if it will clobber the display, but once we know the display has been disabled, we can proceed with the reset as we shutdown the module. We know the next user must reinitialise the HW for their purpose. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/489 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200525151459.12083-1-chris@chris-wilson.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21sh: fault: Fix duplicate printing of "PC:"Geert Uytterhoeven
[ Upstream commit 845d9156febcd6b3b20c0c2c8d73b461b48e844c ] Somewhere along the patch handling path, both the old "printk(KERN_ALERT ....)" and the new "pr_alert(...)" were retained, leading to the duplicate printing of "PC:". Drop the old one. Fixes: eaabf98b0932a540 ("sh: fault: modernize printing of kernel messages") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rich Felker <dalias@libc.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21sh: landisk: Add missing initialization of sh_io_port_baseGeert Uytterhoeven
[ Upstream commit 0c64a0dce51faa9c706fdf1f957d6f19878f4b81 ] The Landisk setup code maps the CF IDE area using ioremap_prot(), and passes the resulting virtual addresses to the pata_platform driver, disguising them as I/O port addresses. Hence the pata_platform driver translates them again using ioport_map(). As CONFIG_GENERIC_IOMAP=n, and CONFIG_HAS_IOPORT_MAP=y, the SuperH-specific mapping code in arch/sh/kernel/ioport.c translates I/O port addresses to virtual addresses by adding sh_io_port_base, which defaults to -1, thus breaking the assumption of an identity mapping. Fix this by setting sh_io_port_base to zero. Fixes: 37b7a97884ba64bf ("sh: machvec IO death.") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rich Felker <dalias@libc.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21perf/x86/rapl: Fix missing psys sysfs attributesZhang Rui
[ Upstream commit 4bb5fcb97a5df0bbc0a27e0252b1e7ce140a8431 ] This fixes a problem introduced by commit: 5fb5273a905c ("perf/x86/rapl: Use new MSR detection interface") that perf event sysfs attributes for psys RAPL domain are missing. Fixes: 5fb5273a905c ("perf/x86/rapl: Use new MSR detection interface") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Reviewed-by: Len Brown <len.brown@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20200811153149.12242-2-rui.zhang@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21tools build feature: Quote CC and CXX for their argumentsDaniel Díaz
[ Upstream commit fa5c893181ed2ca2f96552f50073786d2cfce6c0 ] When using a cross-compilation environment, such as OpenEmbedded, the CC an CXX variables are set to something more than just a command: there are arguments (such as --sysroot) that need to be passed on to the compiler so that the right set of headers and libraries are used. For the particular case that our systems detected, CC is set to the following: export CC="aarch64-linaro-linux-gcc --sysroot=/oe/build/tmp/work/machine/perf/1.0-r9/recipe-sysroot" Without quotes, detection is as follows: Auto-detecting system features: ... dwarf: [ OFF ] ... dwarf_getlocations: [ OFF ] ... glibc: [ OFF ] ... gtk2: [ OFF ] ... libbfd: [ OFF ] ... libcap: [ OFF ] ... libelf: [ OFF ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libcrypto: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ OFF ] ... zlib: [ OFF ] ... lzma: [ OFF ] ... get_cpuid: [ OFF ] ... bpf: [ OFF ] ... libaio: [ OFF ] ... libzstd: [ OFF ] ... disassembler-four-args: [ OFF ] Makefile.config:414: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop. Makefile.perf:230: recipe for target 'sub-make' failed make[1]: *** [sub-make] Error 2 Makefile:69: recipe for target 'all' failed make: *** [all] Error 2 With CC and CXX quoted, some of those features are now detected. Fixes: e3232c2f39ac ("tools build feature: Use CC and CXX from parent") Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Reviewed-by: Thomas Hebb <tommyhebb@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@chromium.org> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Link: http://lore.kernel.org/lkml/20200812221518.2869003-1-daniel.diaz@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21perf bench mem: Always memset source before memcpyVincent Whitchurch
[ Upstream commit 1beaef29c34154ccdcb3f1ae557f6883eda18840 ] For memcpy, the source pages are memset to zero only when --cycles is used. This leads to wildly different results with or without --cycles, since all sources pages are likely to be mapped to the same zero page without explicit writes. Before this fix: $ export cmd="./perf stat -e LLC-loads -- ./perf bench \ mem memcpy -s 1024MB -l 100 -f default" $ $cmd 2,935,826 LLC-loads 3.821677452 seconds time elapsed $ $cmd --cycles 217,533,436 LLC-loads 8.616725985 seconds time elapsed After this fix: $ $cmd 214,459,686 LLC-loads 8.674301124 seconds time elapsed $ $cmd --cycles 214,758,651 LLC-loads 8.644480006 seconds time elapsed Fixes: 47b5757bac03c338 ("perf bench mem: Move boilerplate memory allocation to the infrastructure") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel@axis.com Link: http://lore.kernel.org/lkml/20200810133404.30829-1-vincent.whitchurch@axis.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21ALSA: echoaudio: Fix potential Oops in snd_echo_resume()Dinghao Liu
[ Upstream commit 5a25de6df789cc805a9b8ba7ab5deef5067af47e ] Freeing chip on error may lead to an Oops at the next time the system goes to resume. Fix this by removing all snd_echo_free() calls on error. Fixes: 47b5d028fdce8 ("ALSA: Echoaudio - Add suspend support #2") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20200813074632.17022-1-dinghao.liu@zju.edu.cn Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21crypto: algif_aead - fix uninitialized ctx->initOndrej Mosnacek
[ Upstream commit 21dfbcd1f5cbff9cf2f9e7e43475aed8d072b0dd ] In skcipher_accept_parent_nokey() the whole af_alg_ctx structure is cleared by memset() after allocation, so add such memset() also to aead_accept_parent_nokey() so that the new "init" field is also initialized to zero. Without that the initial ctx->init checks might randomly return true and cause errors. While there, also remove the redundant zero assignments in both functions. Found via libkcapi testsuite. Cc: Stephan Mueller <smueller@chronox.de> Fixes: f3c802a1f300 ("crypto: algif_aead - Only wake up when ctx->more is zero") Suggested-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21mfd: dln2: Run event handler loop under spinlockAndy Shevchenko
[ Upstream commit 3d858942250820b9adc35f963a257481d6d4c81d ] The event handler loop must be run with interrupts disabled. Otherwise we will have a warning: [ 1970.785649] irq 31 handler lineevent_irq_handler+0x0/0x20 enabled interrupts [ 1970.792739] WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:159 __handle_irq_event_percpu+0x162/0x170 [ 1970.860732] RIP: 0010:__handle_irq_event_percpu+0x162/0x170 ... [ 1970.946994] Call Trace: [ 1970.949446] <IRQ> [ 1970.951471] handle_irq_event_percpu+0x2c/0x80 [ 1970.955921] handle_irq_event+0x23/0x43 [ 1970.959766] handle_simple_irq+0x57/0x70 [ 1970.963695] generic_handle_irq+0x42/0x50 [ 1970.967717] dln2_rx+0xc1/0x210 [dln2] [ 1970.971479] ? usb_hcd_unmap_urb_for_dma+0xa6/0x1c0 [ 1970.976362] __usb_hcd_giveback_urb+0x77/0xe0 [ 1970.980727] usb_giveback_urb_bh+0x8e/0xe0 [ 1970.984837] tasklet_action_common.isra.0+0x4a/0xe0 ... Recently xHCI driver switched to tasklets in the commit 36dc01657b49 ("usb: host: xhci: Support running urb giveback in tasklet context"). The handle_irq_event_* functions are expected to be called with interrupts disabled and they rightfully complain here because we run in tasklet context with interrupts enabled. Use a event spinlock to protect event handler from being interrupted. Note, that there are only two users of this GPIO and ADC drivers and both of them are using generic_handle_irq() which makes above happen. Fixes: 338a12814297 ("mfd: Add support for Diolan DLN-2 devices") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21i2c: iproc: fix race between client unreg and isrDhananjay Phadke
[ Upstream commit b1eef236f50ba6afea680da039ef3a2ca9c43d11 ] When i2c client unregisters, synchronize irq before setting iproc_i2c->slave to NULL. (1) disable_irq() (2) Mask event enable bits in control reg (3) Erase slave address (avoid further writes to rx fifo) (4) Flush tx and rx FIFOs (5) Clear pending event (interrupt) bits in status reg (6) enable_irq() (7) Set client pointer to NULL Unable to handle kernel NULL pointer dereference at virtual address 0000000000000318 [ 371.020421] pc : bcm_iproc_i2c_isr+0x530/0x11f0 [ 371.025098] lr : __handle_irq_event_percpu+0x6c/0x170 [ 371.030309] sp : ffff800010003e40 [ 371.033727] x29: ffff800010003e40 x28: 0000000000000060 [ 371.039206] x27: ffff800010ca9de0 x26: ffff800010f895df [ 371.044686] x25: ffff800010f18888 x24: ffff0008f7ff3600 [ 371.050165] x23: 0000000000000003 x22: 0000000001600000 [ 371.055645] x21: ffff800010f18888 x20: 0000000001600000 [ 371.061124] x19: ffff0008f726f080 x18: 0000000000000000 [ 371.066603] x17: 0000000000000000 x16: 0000000000000000 [ 371.072082] x15: 0000000000000000 x14: 0000000000000000 [ 371.077561] x13: 0000000000000000 x12: 0000000000000001 [ 371.083040] x11: 0000000000000000 x10: 0000000000000040 [ 371.088519] x9 : ffff800010f317c8 x8 : ffff800010f317c0 [ 371.093999] x7 : ffff0008f805b3b0 x6 : 0000000000000000 [ 371.099478] x5 : ffff0008f7ff36a4 x4 : ffff8008ee43d000 [ 371.104957] x3 : 0000000000000000 x2 : ffff8000107d64c0 [ 371.110436] x1 : 00000000c00000af x0 : 0000000000000000 [ 371.115916] Call trace: [ 371.118439] bcm_iproc_i2c_isr+0x530/0x11f0 [ 371.122754] __handle_irq_event_percpu+0x6c/0x170 [ 371.127606] handle_irq_event_percpu+0x34/0x88 [ 371.132189] handle_irq_event+0x40/0x120 [ 371.136234] handle_fasteoi_irq+0xcc/0x1a0 [ 371.140459] generic_handle_irq+0x24/0x38 [ 371.144594] __handle_domain_irq+0x60/0xb8 [ 371.148820] gic_handle_irq+0xc0/0x158 [ 371.152687] el1_irq+0xb8/0x140 [ 371.155927] arch_cpu_idle+0x10/0x18 [ 371.159615] do_idle+0x204/0x290 [ 371.162943] cpu_startup_entry+0x24/0x60 [ 371.166990] rest_init+0xb0/0xbc [ 371.170322] arch_call_rest_init+0xc/0x14 [ 371.174458] start_kernel+0x404/0x430 Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Dhananjay Phadke <dphadke@linux.microsoft.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21test_kmod: avoid potential double free in trigger_config_run_type()Tiezhu Yang
[ Upstream commit 0776d1231bec0c7ab43baf440a3f5ef5f49dd795 ] Reset the member "test_fs" of the test configuration after a call of the function "kfree_const" to a null pointer so that a double memory release will not be performed. Fixes: d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: James Morris <jmorris@namei.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kees Cook <keescook@chromium.org> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Sergei Trofimovich <slyfox@gentoo.org> Cc: Sergey Kvachonok <ravenexp@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tony Vroon <chainsaw@gentoo.org> Cc: Christoph Hellwig <hch@infradead.org> Link: http://lkml.kernel.org/r/20200610154923.27510-4-mcgrof@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21fs/ufs: avoid potential u32 multiplication overflowColin Ian King
[ Upstream commit 88b2e9b06381551b707d980627ad0591191f7a2d ] The 64 bit ino is being compared to the product of two u32 values, however, the multiplication is being performed using a 32 bit multiply so there is a potential of an overflow. To be fully safe, cast uspi->s_ncg to a u64 to ensure a 64 bit multiplication occurs to avoid any chance of overflow. Fixes: f3e2a520f5fb ("ufs: NFS support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Evgeniy Dushistov <dushistov@mail.ru> Cc: Alexey Dobriyan <adobriyan@gmail.com> Link: http://lkml.kernel.org/r/20200715170355.1081713-1-colin.king@canonical.com Addresses-Coverity: ("Unintentional integer overflow") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21fs/minix: remove expected error message in block_to_path()Eric Biggers
[ Upstream commit f666f9fb9a36f1c833b9d18923572f0e4d304754 ] When truncating a file to a size within the last allowed logical block, block_to_path() is called with the *next* block. This exceeds the limit, causing the "block %ld too big" error message to be printed. This case isn't actually an error; there are just no more blocks past that point. So, remove this error message. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Qiujun Huang <anenbupt@gmail.com> Link: http://lkml.kernel.org/r/20200628060846.682158-7-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21fs/minix: fix block limit check for V1 filesystemsEric Biggers
[ Upstream commit 0a12c4a8069607247cb8edc3b035a664e636fd9a ] The minix filesystem reads its maximum file size from its on-disk superblock. This value isn't necessarily a multiple of the block size. When it's not, the V1 block mapping code doesn't allow mapping the last possible block. Commit 6ed6a722f9ab ("minixfs: fix block limit check") fixed this in the V2 mapping code. Fix it in the V1 mapping code too. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Qiujun Huang <anenbupt@gmail.com> Link: http://lkml.kernel.org/r/20200628060846.682158-6-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21fs/minix: set s_maxbytes correctlyEric Biggers
[ Upstream commit 32ac86efff91a3e4ef8c3d1cadd4559e23c8e73a ] The minix filesystem leaves super_block::s_maxbytes at MAX_NON_LFS rather than setting it to the actual filesystem-specific limit. This is broken because it means userspace doesn't see the standard behavior like getting EFBIG and SIGXFSZ when exceeding the maximum file size. Fix this by setting s_maxbytes correctly. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Qiujun Huang <anenbupt@gmail.com> Link: http://lkml.kernel.org/r/20200628060846.682158-5-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21lib/test_lockup.c: fix return value of test_lockup_init()Tiezhu Yang
[ Upstream commit 3adf3bae0d612357da516d39e1584f1547eb6e86 ] Since filp_open() returns an error pointer, we should use IS_ERR() to check the return value and then return PTR_ERR() if failed to get the actual return value instead of always -EINVAL. E.g. without this patch: [root@localhost loongson]# ls no_such_file ls: cannot access no_such_file: No such file or directory [root@localhost loongson]# modprobe test_lockup file_path=no_such_file lock_sb_umount time_secs=60 state=S modprobe: ERROR: could not insert 'test_lockup': Invalid argument [root@localhost loongson]# dmesg | tail -1 [ 126.100596] test_lockup: cannot find file_path With this patch: [root@localhost loongson]# ls no_such_file ls: cannot access no_such_file: No such file or directory [root@localhost loongson]# modprobe test_lockup file_path=no_such_file lock_sb_umount time_secs=60 state=S modprobe: ERROR: could not insert 'test_lockup': Unknown symbol in module, or unknown parameter (see dmesg) [root@localhost loongson]# dmesg | tail -1 [ 95.134362] test_lockup: failed to open no_such_file: -2 Fixes: aecd42df6d39 ("lib/test_lockup.c: add parameters for locking generic vfs locks") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/1595555407-29875-2-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21NFS: Fix flexfiles read failoverTrond Myklebust
[ Upstream commit 563c53e73b8b6ec842828736f77e633f7b0911e9 ] The current mirrored read failover code is correctly resetting the mirror index between failed reads, however it is not able to actually flip the RPC call over to the next RPC client. The end result is that we keep resending the RPC call to the same client over and over. The fix is to use the pnfs_read_resend_pnfs() mechanism to schedule a new RPC call, but we need to add the ability to pass in a mirror index so that we always retry the next mirror in the list. Fixes: 166bd5b889ac ("pNFS/flexfiles: Fix layoutstats handling during read failovers") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21nfs: Fix getxattr kernel panic and memory overflowJeffrey Mitchell
[ Upstream commit b4487b93545214a9db8cbf32e86411677b0cca21 ] Move the buffer size check to decode_attr_security_label() before memcpy() Only call memcpy() if the buffer is large enough Fixes: aa9c2669626c ("NFS: Client implementation of Labeled-NFS") Signed-off-by: Jeffrey Mitchell <jeffrey.mitchell@starlab.io> [Trond: clean up duplicate test of label->len != 0] Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21net: qcom/emac: add missed clk_disable_unprepare in error path of ↵Wang Hai
emac_clks_phase1_init [ Upstream commit 50caa777a3a24d7027748e96265728ce748b41ef ] Fix the missing clk_disable_unprepare() before return from emac_clks_phase1_init() in the error handling case. Fixes: b9b17debc69d ("net: emac: emac gigabit ethernet controller driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Timur Tabi <timur@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21s390/Kconfig: add missing ZCRYPT dependency to VFIO_APKrzysztof Kozlowski
[ Upstream commit 929a343b858612100cb09443a8aaa20d4a4706d3 ] The VFIO_AP uses ap_driver_register() (and deregister) functions implemented in ap_bus.c (compiled into ap.o). However the ap.o will be built only if CONFIG_ZCRYPT is selected. This was not visible before commit e93a1695d7fb ("iommu: Enable compile testing for some of drivers") because the CONFIG_VFIO_AP depends on CONFIG_S390_AP_IOMMU which depends on the missing CONFIG_ZCRYPT. After adding COMPILE_TEST, it is possible to select a configuration with VFIO_AP and S390_AP_IOMMU but without the ZCRYPT. Add proper dependency to the VFIO_AP to fix build errors: ERROR: modpost: "ap_driver_register" [drivers/s390/crypto/vfio_ap.ko] undefined! ERROR: modpost: "ap_driver_unregister" [drivers/s390/crypto/vfio_ap.ko] undefined! Reported-by: kernel test robot <lkp@intel.com> Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21s390/test_unwind: fix possible memleak in test_unwind()Wang Hai
[ Upstream commit 75d3e7f4769d276a056efa1cc7f08de571fc9b4b ] test_unwind() misses to call kfree(bt) in an error path. Add the missed function call to fix it. Fixes: 0610154650f1 ("s390/test_unwind: print verbose unwinding results") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21drm/vmwgfx: Fix two list_for_each loop exit testsDan Carpenter
[ Upstream commit 4437c1152ce0e57ab8f401aa696ea6291cc07ab1 ] These if statements are supposed to be true if we ended the list_for_each_entry() loops without hitting a break statement but they don't work. In the first loop, we increment "i" after the "if (i == unit)" condition so we don't necessarily know that "i" is not equal to unit at the end of the loop. In the second loop we exit when mode is not pointing to a valid drm_display_mode struct so it doesn't make sense to check "mode->type". Fixes: a278724aa23c ("drm/vmwgfx: Implement fbdev on kms v2") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Signed-off-by: Roland Scheidegger <sroland@vmware.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21drm/vmwgfx: Use correct vmw_legacy_display_unit pointerDan Carpenter
[ Upstream commit 1d2c0c565bc0da25f5e899a862fb58e612b222df ] The "entry" pointer is an offset from the list head and it doesn't point to a valid vmw_legacy_display_unit struct. Presumably the intent was to point to the last entry. Also the "i++" wasn't used so I have removed that as well. Fixes: d7e1958dbe4a ("drm/vmwgfx: Support older hardware.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Signed-off-by: Roland Scheidegger <sroland@vmware.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21vdpa: Fix pointer math bug in vdpasim_get_config()Dan Carpenter
[ Upstream commit cf16fe9243bfa2863491026fc727618c7c593c84 ] If "offset" is non-zero then we end up copying from beyond the end of the config because of pointer math. We can fix this by casting the struct to a u8 pointer. Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200406144552.GF68494@mwanda Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21recordmcount: Fix build failure on non arm64Christophe Leroy
[ Upstream commit 3df14264ad9930733a8166e5bd0eccc1727564bb ] Commit ea0eada45632 leads to the following build failure on powerpc: HOSTCC scripts/recordmcount scripts/recordmcount.c: In function 'arm64_is_fake_mcount': scripts/recordmcount.c:440: error: 'R_AARCH64_CALL26' undeclared (first use in this function) scripts/recordmcount.c:440: error: (Each undeclared identifier is reported only once scripts/recordmcount.c:440: error: for each function it appears in.) make[2]: *** [scripts/recordmcount] Error 1 Make sure R_AARCH64_CALL26 is always defined. Fixes: ea0eada45632 ("recordmcount: only record relocation of type R_AARCH64_CALL26 on arm64.") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Gregory Herrero <gregory.herrero@oracle.com> Cc: Gregory Herrero <gregory.herrero@oracle.com> Link: https://lore.kernel.org/r/5ca1be21fa6ebf73203b45fd9aadd2bafb5e6b15.1597049145.git.christophe.leroy@csgroup.eu Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21vdpa_sim: init iommu lockMichael S. Tsirkin
[ Upstream commit 1e3e792650d2c0df8dd796906275b7c79e278664 ] The patch adding the iommu lock did not initialize it. The struct is zero-initialized so this is mostly a problem when using lockdep. Reported-by: kernel test robot <rong.a.chen@intel.com> Cc: Max Gurtovoy <maxg@mellanox.com> Fixes: 0ea9ee430e74 ("vdpasim: protect concurrent access to iommu iotlb") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21selftests/bpf: Fix silent Makefile outputAndrii Nakryiko
[ Upstream commit d5ca590525cfbd87ca307dcf498a566e2e7c1767 ] 99aacebecb75 ("selftests: do not use .ONESHELL") removed .ONESHELL, which changes how Makefile "silences" multi-command target recipes. selftests/bpf's Makefile relied (a somewhat unknowingly) on .ONESHELL behavior of silencing all commands within the recipe if the first command contains @ symbol. Removing .ONESHELL exposed this hack. This patch fixes the issue by explicitly silencing each command with $(Q). Also explicitly define fallback rule for building *.o from *.c, instead of relying on non-silent inherited rule. This was causing a non-silent output for bench.o object file. Fixes: 92f7440ecc93 ("selftests/bpf: More succinct Makefile output") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200807033058.848677-1-andriin@fb.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21perf record: Skip side-band event setup if HAVE_LIBBPF_SUPPORT is not setJin Yao
[ Upstream commit 1101c872c8c7869c78dc106ae820040f36807eda ] We received an error report that perf-record caused 'Segmentation fault' on a newly system (e.g. on the new installed ubuntu). (gdb) backtrace #0 __read_once_size (size=4, res=<synthetic pointer>, p=0x14) at /root/0-jinyao/acme/tools/include/linux/compiler.h:139 #1 atomic_read (v=0x14) at /root/0-jinyao/acme/tools/include/asm/../../arch/x86/include/asm/atomic.h:28 #2 refcount_read (r=0x14) at /root/0-jinyao/acme/tools/include/linux/refcount.h:65 #3 perf_mmap__read_init (map=map@entry=0x0) at mmap.c:177 #4 0x0000561ce5c0de39 in perf_evlist__poll_thread (arg=0x561ce68584d0) at util/sideband_evlist.c:62 #5 0x00007fad78491609 in start_thread (arg=<optimized out>) at pthread_create.c:477 #6 0x00007fad7823c103 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95 The root cause is, evlist__add_bpf_sb_event() just returns 0 if HAVE_LIBBPF_SUPPORT is not defined (inline function path). So it will not create a valid evsel for side-band event. But perf-record still creates BPF side band thread to process the side-band event, then the error happpens. We can reproduce this issue by removing the libelf-dev. e.g. 1. apt-get remove libelf-dev 2. perf record -a -- sleep 1 root@test:~# ./perf record -a -- sleep 1 perf: Segmentation fault Obtained 6 stack frames. ./perf(+0x28eee8) [0x5562d6ef6ee8] /lib/x86_64-linux-gnu/libc.so.6(+0x46210) [0x7fbfdc65f210] ./perf(+0x342e74) [0x5562d6faae74] ./perf(+0x257e39) [0x5562d6ebfe39] /lib/x86_64-linux-gnu/libpthread.so.0(+0x9609) [0x7fbfdc990609] /lib/x86_64-linux-gnu/libc.so.6(clone+0x43) [0x7fbfdc73b103] Segmentation fault (core dumped) To fix this issue, 1. We either install the missing libraries to let HAVE_LIBBPF_SUPPORT be defined. e.g. apt-get install libelf-dev and install other related libraries. 2. Use this patch to skip the side-band event setup if HAVE_LIBBPF_SUPPORT is not set. Committer notes: The side band thread is not used just with BPF, it is also used with --switch-output-event, so narrow the ifdef to the BPF specific part. Fixes: 23cbb41c939a ("perf record: Move side band evlist setup to separate routine") Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200805022937.29184-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21Input: sentelic - fix error return when fsp_reg_write failsColin Ian King
[ Upstream commit ea38f06e0291986eb93beb6d61fd413607a30ca4 ] Currently when the call to fsp_reg_write fails -EIO is not being returned because the count is being returned instead of the return value in retval. Fix this by returning the value in retval instead of count. Addresses-Coverity: ("Unused value") Fixes: fc69f4a6af49 ("Input: add new driver for Sentelic Finger Sensing Pad") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200603141218.131663-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21selftests/bpf: Prevent runqslower from racing on building bpftoolAndrii Nakryiko
[ Upstream commit 6bcaf41f9613278cd5897fc80ab93033bda8efaa ] runqslower's Makefile is building/installing bpftool into $(OUTPUT)/sbin/bpftool, which coincides with $(DEFAULT_BPFTOOL). In practice this means that often when building selftests from scratch (after `make clean`), selftests are racing with runqslower to simultaneously build bpftool and one of the two processes fail due to file being busy. Prevent this race by explicitly order-depending on $(BPFTOOL_DEFAULT). Fixes: a2c9652f751e ("selftests: Refactor build to remove tools/lib/bpf from include path") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200805004757.2960750-1-andriin@fb.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21x86/bugs/multihit: Fix mitigation reporting when VMX is not in usePawan Gupta
[ Upstream commit f29dfa53cc8ae6ad93bae619bcc0bf45cab344f7 ] On systems that have virtualization disabled or unsupported, sysfs mitigation for X86_BUG_ITLB_MULTIHIT is reported incorrectly as: $ cat /sys/devices/system/cpu/vulnerabilities/itlb_multihit KVM: Vulnerable System is not vulnerable to DoS attack from a rogue guest when virtualization is disabled or unsupported in the hardware. Change the mitigation reporting for these cases. Fixes: b8e8c8303ff2 ("kvm: mmu: ITLB_MULTIHIT mitigation") Reported-by: Nelson Dsouza <nelson.dsouza@linux.intel.com> Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Tony Luck <tony.luck@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/0ba029932a816179b9d14a30db38f0f11ef1f166.1594925782.git.pawan.kumar.gupta@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoCDilip Kota
[ Upstream commit 7d98585860d845e36ee612832a5ff021f201dbaf ] Frequency descriptor of Lightning Mountain SoC doesn't have all the frequency entries so resulting in the below failure causing a kernel hang: Error MSR_FSB_FREQ index 15 is unknown tsc: Fast TSC calibration failed So, add all the frequency entries in the Lightning Mountain SoC frequency descriptor. Fixes: 0cc5359d8fd45 ("x86/cpu: Update init data for new Airmont CPU model") Fixes: 812c2d7506fd ("x86/tsc_msr: Use named struct initializers") Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/211c643ae217604b46cbec43a2c0423946dc7d2d.1596440057.git.eswara.kota@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21kprobes: Fix compiler warning for !CONFIG_KPROBES_ON_FTRACEMuchun Song
[ Upstream commit 10de795a5addd1962406796a6e13ba6cc0fc6bee ] Fix compiler warning(as show below) for !CONFIG_KPROBES_ON_FTRACE. kernel/kprobes.c: In function 'kill_kprobe': kernel/kprobes.c:1116:33: warning: statement with no effect [-Wunused-value] 1116 | #define disarm_kprobe_ftrace(p) (-ENODEV) | ^ kernel/kprobes.c:2154:3: note: in expansion of macro 'disarm_kprobe_ftrace' 2154 | disarm_kprobe_ftrace(p); Link: https://lore.kernel.org/r/20200805142136.0331f7ea@canb.auug.org.au Link: https://lkml.kernel.org/r/20200805172046.19066-1-songmuchun@bytedance.com Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 0cb2f1372baa ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler") Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21md-cluster: Fix potential error pointer dereference in resize_bitmaps()Dan Carpenter
[ Upstream commit e8abe1de43dac658dacbd04a4543e0c988a8d386 ] The error handling calls md_bitmap_free(bitmap) which checks for NULL but will Oops if we pass an error pointer. Let's set "bitmap" to NULL on this error path. Fixes: afd756286083 ("md-cluster/raid10: resize all the bitmaps before start reshape") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21watchdog: rti-wdt: balance pm runtime enable callsTero Kristo
[ Upstream commit d5b29c2c5ba2bd5bbdb5b744659984185d17d079 ] PM runtime should be disabled in the fail path of probe and when the driver is removed. Fixes: 2d63908bdbfb ("watchdog: Add K3 RTI watchdog support") Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200717132958.14304-5-t-kristo@ti.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21watchdog: initialize device before misc_registerKrzysztof Sobota
[ Upstream commit cb36e29bb0e4b0c33c3d5866a0a4aebace4c99b7 ] When watchdog device is being registered, it calls misc_register that makes watchdog available for systemd to open. This is a data race scenario, because when device is open it may still have device struct not initialized - this in turn causes a crash. This patch moves device initialization before misc_register call and it solves the problem printed below. ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1 at lib/kobject.c:612 kobject_get+0x50/0x54 kobject: '(null)' ((ptrval)): is not initialized, yet kobject_get() is being called. Modules linked in: k2_reset_status(O) davinci_wdt(+) sfn_platform_hwbcn(O) fsmddg_sfn(O) clk_misc_mmap(O) clk_sw_bcn(O) fsp_reset(O) cma_mod(O) slave_sup_notif(O) fpga_master(O) latency(O+) evnotify(O) enable_arm_pmu(O) xge(O) rio_mport_cdev br_netfilter bridge stp llc nvrd_checksum(O) ipv6 CPU: 3 PID: 1 Comm: systemd Tainted: G O 4.19.113-g2579778-fsm4_k2 #1 Hardware name: Keystone [<c02126c4>] (unwind_backtrace) from [<c020da94>] (show_stack+0x18/0x1c) [<c020da94>] (show_stack) from [<c07f87d8>] (dump_stack+0xb4/0xe8) [<c07f87d8>] (dump_stack) from [<c0221f70>] (__warn+0xfc/0x114) [<c0221f70>] (__warn) from [<c0221fd8>] (warn_slowpath_fmt+0x50/0x74) [<c0221fd8>] (warn_slowpath_fmt) from [<c07fd394>] (kobject_get+0x50/0x54) [<c07fd394>] (kobject_get) from [<c0602ce8>] (get_device+0x1c/0x24) [<c0602ce8>] (get_device) from [<c06961e0>] (watchdog_open+0x90/0xf0) [<c06961e0>] (watchdog_open) from [<c06001dc>] (misc_open+0x130/0x17c) [<c06001dc>] (misc_open) from [<c0388228>] (chrdev_open+0xec/0x1a8) [<c0388228>] (chrdev_open) from [<c037fa98>] (do_dentry_open+0x204/0x3cc) [<c037fa98>] (do_dentry_open) from [<c0391e2c>] (path_openat+0x330/0x1148) [<c0391e2c>] (path_openat) from [<c0394518>] (do_filp_open+0x78/0xec) [<c0394518>] (do_filp_open) from [<c0381100>] (do_sys_open+0x130/0x1f4) [<c0381100>] (do_sys_open) from [<c0201000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xd2ceffa8 to 0xd2cefff0) ffa0: b6f69968 00000000 ffffff9c b6ebd210 000a0001 00000000 ffc0: b6f69968 00000000 00000000 00000142 fffffffd ffffffff 00b65530 bed7bb78 ffe0: 00000142 bed7ba70 b6cc2503 b6cc41d6 ---[ end trace 7b16eb105513974f ]--- ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1 at lib/refcount.c:153 kobject_get+0x24/0x54 refcount_t: increment on 0; use-after-free. Modules linked in: k2_reset_status(O) davinci_wdt(+) sfn_platform_hwbcn(O) fsmddg_sfn(O) clk_misc_mmap(O) clk_sw_bcn(O) fsp_reset(O) cma_mod(O) slave_sup_notif(O) fpga_master(O) latency(O+) evnotify(O) enable_arm_pmu(O) xge(O) rio_mport_cdev br_netfilter bridge stp llc nvrd_checksum(O) ipv6 CPU: 3 PID: 1 Comm: systemd Tainted: G W O 4.19.113-g2579778-fsm4_k2 #1 Hardware name: Keystone [<c02126c4>] (unwind_backtrace) from [<c020da94>] (show_stack+0x18/0x1c) [<c020da94>] (show_stack) from [<c07f87d8>] (dump_stack+0xb4/0xe8) [<c07f87d8>] (dump_stack) from [<c0221f70>] (__warn+0xfc/0x114) [<c0221f70>] (__warn) from [<c0221fd8>] (warn_slowpath_fmt+0x50/0x74) [<c0221fd8>] (warn_slowpath_fmt) from [<c07fd368>] (kobject_get+0x24/0x54) [<c07fd368>] (kobject_get) from [<c0602ce8>] (get_device+0x1c/0x24) [<c0602ce8>] (get_device) from [<c06961e0>] (watchdog_open+0x90/0xf0) [<c06961e0>] (watchdog_open) from [<c06001dc>] (misc_open+0x130/0x17c) [<c06001dc>] (misc_open) from [<c0388228>] (chrdev_open+0xec/0x1a8) [<c0388228>] (chrdev_open) from [<c037fa98>] (do_dentry_open+0x204/0x3cc) [<c037fa98>] (do_dentry_open) from [<c0391e2c>] (path_openat+0x330/0x1148) [<c0391e2c>] (path_openat) from [<c0394518>] (do_filp_open+0x78/0xec) [<c0394518>] (do_filp_open) from [<c0381100>] (do_sys_open+0x130/0x1f4) [<c0381100>] (do_sys_open) from [<c0201000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xd2ceffa8 to 0xd2cefff0) ffa0: b6f69968 00000000 ffffff9c b6ebd210 000a0001 00000000 ffc0: b6f69968 00000000 00000000 00000142 fffffffd ffffffff 00b65530 bed7bb78 ffe0: 00000142 bed7ba70 b6cc2503 b6cc41d6 ---[ end trace 7b16eb1055139750 ]--- Fixes: 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Krzysztof Sobota <krzysztof.sobota@nokia.com> Link: https://lore.kernel.org/r/20200717103109.14660-1-krzysztof.sobota@nokia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21nfs: nfs_file_write() should check for writeback errorsScott Mayhew
[ Upstream commit ce368536dd614452407dc31e2449eb84681a06af ] The NFS_CONTEXT_ERROR_WRITE flag (as well as the check of said flag) was removed by commit 6fbda89b257f. The absence of an error check allows writes to be continually queued up for a server that may no longer be able to handle them. Fix it by adding an error check using the generic error reporting functions. Fixes: 6fbda89b257f ("NFS: Replace custom error reporting mechanism with generic one") Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21scsi: lpfc: nvmet: Avoid hang / use-after-free again when destroying targetportEwan D. Milne
[ Upstream commit af6de8c60fe9433afa73cea6fcccdccd98ad3e5e ] We cannot wait on a completion object in the lpfc_nvme_targetport structure in the _destroy_targetport() code path because the NVMe/fc transport will free that structure immediately after the .targetport_delete() callback. This results in a use-after-free, and a crash if slub_debug=FZPU is enabled. An earlier fix put put the completion on the stack, but commit 2a0fb340fcc8 ("scsi: lpfc: Correct localport timeout duration error") subsequently changed the code to reference the completion through a pointer in the object rather than the local stack variable. Fix this by using the stack variable directly. Link: https://lore.kernel.org/r/20200729231011.13240-1-emilne@redhat.com Fixes: 2a0fb340fcc8 ("scsi: lpfc: Correct localport timeout duration error") Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 22:13:37 +0000