summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-23x86/Hyper-V: Report crash register data when sysctl_record_panic_msg is not setTianyu Lan
commit 040026df7088c56ccbad28f7042308f67bde63df upstream. When sysctl_record_panic_msg is not set, the panic will not be reported to Hyper-V via hyperv_report_panic_msg(). So the crash should be reported via hyperv_report_panic(). Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Link: https://lore.kernel.org/r/20200406155331.2105-6-Tianyu.Lan@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23x86/Hyper-V: Report crash register data or kmsg before running crash kernelTianyu Lan
commit a11589563e96bf262767294b89b25a9d44e7303b upstream. We want to notify Hyper-V when a Linux guest VM crash occurs, so there is a record of the crash even when kdump is enabled. But crash_kexec_post_notifiers defaults to "false", so the kdump kernel runs before the notifiers and Hyper-V never gets notified. Fix this by always setting crash_kexec_post_notifiers to be true for Hyper-V VMs. Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Link: https://lore.kernel.org/r/20200406155331.2105-5-Tianyu.Lan@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23x86/Hyper-V: Trigger crash enlightenment only once during system crash.Tianyu Lan
commit 73f26e526f19afb3a06b76b970a76bcac2cafd05 upstream. When a guest VM panics, Hyper-V should be notified only once via the crash synthetic MSRs. Current Linux code might write these crash MSRs twice during a system panic: 1) hyperv_panic/die_event() calling hyperv_report_panic() 2) hv_kmsg_dump() calling hyperv_report_panic_msg() Fix this by not calling hyperv_report_panic() if a kmsg dump has been successfully registered. The notification will happen later via hyperv_report_panic_msg(). Fixes: 7ed4325a44ea ("Drivers: hv: vmbus: Make panic reporting to be more useful") Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Link: https://lore.kernel.org/r/20200406155331.2105-4-Tianyu.Lan@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23x86/Hyper-V: Unload vmbus channel in hv panic callbackTianyu Lan
commit 74347a99e73ae00b8385f1209aaea193c670f901 upstream. When kdump is not configured, a Hyper-V VM might still respond to network traffic after a kernel panic when kernel parameter panic=0. The panic CPU goes into an infinite loop with interrupts enabled, and the VMbus driver interrupt handler still works because the VMbus connection is unloaded only in the kdump path. The network responses make the other end of the connection think the VM is still functional even though it has panic'ed, which could affect any failover actions that should be taken. Fix this by unloading the VMbus connection during the panic process. vmbus_initiate_unload() could then be called twice (e.g., by hyperv_panic_event() and hv_crash_handler(), so reset the connection state in vmbus_initiate_unload() to ensure the unload is done only once. Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Link: https://lore.kernel.org/r/20200406155331.2105-2-Tianyu.Lan@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23of: overlay: kmemleak in dup_and_fixup_symbol_prop()Frank Rowand
commit 478ff649b1c8eb2409b1a54fb75eb46f7c29f140 upstream. kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 4 of 5. target_path was not freed in the non-error path. Fixes: e0a58f3e08d4 ("of: overlay: remove a dependency on device node full_name") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23of: unittest: kmemleak in of_unittest_overlay_high_level()Frank Rowand
commit 145fc138f9aae4f9e1331352e301df28e16aed35 upstream. kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 3 of 5. of_unittest_overlay_high_level() failed to kfree the newly created property when the property named 'name' is skipped. Fixes: 39a751a4cb7e ("of: change overlay apply input data from unflattened to FDT") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23of: unittest: kmemleak in of_unittest_platform_populate()Frank Rowand
commit 216830d2413cc61be3f76bc02ffd905e47d2439e upstream. kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 2 of 5. of_unittest_platform_populate() left an elevated reference count for grandchild nodes (which are platform devices). Fix the platform device reference counts so that the memory will be freed. Fixes: fb2caa50fbac ("of/selftest: add testcase for nodes with same name and address") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23of: unittest: kmemleak on changeset destroyFrank Rowand
commit b3fb36ed694b05738d45218ea72cf7feb10ce2b1 upstream. kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 1 of 5. of_unittest_changeset() reaches deeply into the dynamic devicetree functions. Several nodes were left with an elevated reference count and thus were not properly cleaned up. Fix the reference counts so that the memory will be freed. Fixes: 201c910bd689 ("of: Transactional DT support.") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23xsk: Add missing check on user supplied headroom sizeMagnus Karlsson
commit 99e3a236dd43d06c65af0a2ef9cb44306aef6e02 upstream. Add a check that the headroom cannot be larger than the available space in the chunk. In the current code, a malicious user can set the headroom to a value larger than the chunk size minus the fixed XDP headroom. That way packets with a length larger than the supported size in the umem could get accepted and result in an out-of-bounds write. Fixes: c0c77d8fb787 ("xsk: add user memory registration support sockopt") Reported-by: Bui Quang Minh <minhquangbui99@gmail.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=207225 Link: https://lore.kernel.org/bpf/1586849715-23490-1-git-send-email-magnus.karlsson@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23ALSA: hda: Don't release card at firmware loading errorTakashi Iwai
commit 25faa4bd37c10f19e4b848b9032a17a3d44c6f09 upstream. At the error path of the firmware loading error, the driver tries to release the card object and set NULL to drvdata. This may be referred badly at the possible PM action, as the driver itself is still bound and the PM callbacks read the card object. Instead, we continue the probing as if it were no option set. This is often a better choice than the forced abort, too. Fixes: 5cb543dba986 ("ALSA: hda - Deferred probing with request_firmware_nowait()") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043 Link: https://lore.kernel.org/r/20200413082034.25166-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23irqchip/mbigen: Free msi_desc on device teardownZenghui Yu
commit edfc23f6f9fdbd7825d50ac1f380243cde19b679 upstream. Using irq_domain_free_irqs_common() on the irqdomain free path will leave the MSI descriptor unfreed when platform devices get removed. Properly free it by MSI domain free function. Fixes: 9650c60ebfec0 ("irqchip/mbigen: Create irq domain for each mbigen device") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200408114352.1604-1-yuzenghui@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23netfilter: nf_tables: report EOPNOTSUPP on unsupported flags/object typePablo Neira Ayuso
commit d9583cdf2f38d0f526d9a8c8564dd2e35e649bc7 upstream. EINVAL should be used for malformed netlink messages. New userspace utility and old kernels might easily result in EINVAL when exercising new set features, which is misleading. Fixes: 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23kbuild, btf: Fix dependencies for DEBUG_INFO_BTFSlava Bacherikov
commit 7d32e69310d67e6b04af04f26193f79dfc2f05c7 upstream. Currently turning on DEBUG_INFO_SPLIT when DEBUG_INFO_BTF is also enabled will produce invalid btf file, since gen_btf function in link-vmlinux.sh script doesn't handle *.dwo files. Enabling DEBUG_INFO_REDUCED will also produce invalid btf file, and using GCC_PLUGIN_RANDSTRUCT with BTF makes no sense. Fixes: e83b9f55448a ("kbuild: add ability to generate BTF type info for vmlinux") Reported-by: Jann Horn <jannh@google.com> Reported-by: Liu Yiding <liuyd.fnst@cn.fujitsu.com> Signed-off-by: Slava Bacherikov <slava@bacher09.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: KP Singh <kpsingh@google.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200402204138.408021-1-slava@bacher09.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23ARM: dts: imx6: Use gpc for FEC interrupt controller to fix wake on LAN.Martin Fuzzey
commit 4141f1a40fc0789f6fd4330e171e1edf155426aa upstream. In order to wake from suspend by ethernet magic packets the GPC must be used as intc does not have wakeup functionality. But the FEC DT node currently uses interrupt-extended, specificying intc, thus breaking WoL. This problem is probably fallout from the stacked domain conversion as intc used to chain to GPC. So replace "interrupts-extended" by "interrupts" to use the default parent which is GPC. Fixes: b923ff6af0d5 ("ARM: imx6: convert GPC to stacked domains") Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23ALSA: hda: Honor PM disablement in PM freeze and thaw_noirq opsTakashi Iwai
commit 10db5bccc390e8e4bd9fcd1fbd4f1b23f271a405 upstream. freeze_noirq and thaw_noirq need to check the PM availability like other PM ops. There are cases where the device got disabled due to the error, and the PM operation should be ignored for that. Fixes: 3e6db33aaf1d ("ALSA: hda - Set SKL+ hda controller power at freeze() and thaw()") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043 Link: https://lore.kernel.org/r/20200413082034.25166-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23scsi: sg: add sg_remove_request in sg_common_writeLi Bin
commit 849f8583e955dbe3a1806e03ecacd5e71cce0a08 upstream. If the dxfer_len is greater than 256M then the request is invalid and we need to call sg_remove_request in sg_common_write. Link: https://lore.kernel.org/r/1586777361-17339-1-git-send-email-huawei.libin@huawei.com Fixes: f930c7043663 ("scsi: sg: only check for dxfer_len greater than 256M") Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Li Bin <huawei.libin@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23objtool: Fix switch table detection in .text.unlikelyJosh Poimboeuf
commit b401efc120a399dfda1f4d2858a4de365c9b08ef upstream. If a switch jump table's indirect branch is in a ".cold" subfunction in .text.unlikely, objtool doesn't detect it, and instead prints a false warning: drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame Fix it by comparing the function, instead of the section and offset. Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23arm, bpf: Fix offset overflow for BPF_MEM BPF_DWLuke Nelson
commit 4178417cc5359c329790a4a8f4a6604612338cca upstream. This patch fixes an incorrect check in how immediate memory offsets are computed for BPF_DW on arm. For BPF_LDX/ST/STX + BPF_DW, the 32-bit arm JIT breaks down an 8-byte access into two separate 4-byte accesses using off+0 and off+4. If off fits in imm12, the JIT emits a ldr/str instruction with the immediate and avoids the use of a temporary register. While the current check off <= 0xfff ensures that the first immediate off+0 doesn't overflow imm12, it's not sufficient for the second immediate off+4, which may cause the second access of BPF_DW to read/write the wrong address. This patch fixes the problem by changing the check to off <= 0xfff - 4 for BPF_DW, ensuring off+4 will never overflow. A side effect of simplifying the check is that it now allows using negative immediate offsets in ldr/str. This means that small negative offsets can also avoid the use of a temporary register. This patch introduces no new failures in test_verifier or test_bpf.c. Fixes: c5eae692571d6 ("ARM: net: bpf: improve 64-bit store implementation") Fixes: ec19e02b343db ("ARM: net: bpf: fix LDX instructions") Co-developed-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200409221752.28448-1-luke.r.nels@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23arm, bpf: Fix bugs with ALU64 {RSH, ARSH} BPF_K shift by 0Luke Nelson
commit bb9562cf5c67813034c96afb50bd21130a504441 upstream. The current arm BPF JIT does not correctly compile RSH or ARSH when the immediate shift amount is 0. This causes the "rsh64 by 0 imm" and "arsh64 by 0 imm" BPF selftests to hang the kernel by reaching an instruction the verifier determines to be unreachable. The root cause is in how immediate right shifts are encoded on arm. For LSR and ASR (logical and arithmetic right shift), a bit-pattern of 00000 in the immediate encodes a shift amount of 32. When the BPF immediate is 0, the generated code shifts by 32 instead of the expected behavior (a no-op). This patch fixes the bugs by adding an additional check if the BPF immediate is 0. After the change, the above mentioned BPF selftests pass. Fixes: 39c13c204bb11 ("arm: eBPF JIT compiler") Co-developed-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200408181229.10909-1-luke.r.nels@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23xsk: Fix out of boundary write in __xsk_rcv_memcpyLi RongQing
commit db5c97f02373917efe2c218ebf8e3d8b19e343b6 upstream. first_len is the remainder of the first page we're copying. If this size is larger, then out of page boundary write will otherwise happen. Fixes: c05cd3645814 ("xsk: add support to allow unaligned chunk placement") Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/1585813930-19712-1-git-send-email-lirongqing@baidu.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23watchdog: sp805: fix restart handlerMichael Walle
commit ea104a9e4d3e9ebc26fb78dac35585b142ee288b upstream. The restart handler is missing two things, first, the registers has to be unlocked and second there is no synchronization for the write_relaxed() calls. This was tested on a custom board with the NXP LS1028A SoC. Fixes: 6c5c0d48b686c ("watchdog: sp805: add restart handler") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200327162450.28506-1-michael@walle.cc Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23ext4: use non-movable memory for superblock readaheadRoman Gushchin
commit d87f639258a6a5980183f11876c884931ad93da2 upstream. Since commit a8ac900b8163 ("ext4: use non-movable memory for the superblock") buffers for ext4 superblock were allocated using the sb_bread_unmovable() helper which allocated buffer heads out of non-movable memory blocks. It was necessarily to not block page migrations and do not cause cma allocation failures. However commit 85c8f176a611 ("ext4: preload block group descriptors") broke this by introducing pre-reading of the ext4 superblock. The problem is that __breadahead() is using __getblk() underneath, which allocates buffer heads out of movable memory. It resulted in page migration failures I've seen on a machine with an ext4 partition and a preallocated cma area. Fix this by introducing sb_breadahead_unmovable() and __breadahead_gfp() helpers which use non-movable memory for buffer head allocations and use them for the ext4 superblock readahead. Reviewed-by: Andreas Dilger <adilger@dilger.ca> Fixes: 85c8f176a611 ("ext4: preload block group descriptors") Signed-off-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/r/20200229001411.128010-1-guro@fb.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21Linux 5.4.34v5.4.34Greg Kroah-Hartman
2020-04-21x86/microcode/AMD: Increase microcode PATCH_MAX_SIZEJohn Allen
commit bdf89df3c54518eed879d8fac7577fcfb220c67e upstream. Future AMD CPUs will have microcode patches that exceed the default 4K patch size. Raise our limit. Signed-off-by: John Allen <john.allen@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org # v4.14.. Link: https://lkml.kernel.org/r/20200409152931.GA685273@mojo.amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21scsi: target: fix hang when multiple threads try to destroy the same iscsi ↵Maurizio Lombardi
session [ Upstream commit 57c46e9f33da530a2485fa01aa27b6d18c28c796 ] A number of hangs have been reported against the target driver; they are due to the fact that multiple threads may try to destroy the iscsi session at the same time. This may be reproduced for example when a "targetcli iscsi/iqn.../tpg1 disable" command is executed while a logout operation is underway. When this happens, two or more threads may end up sleeping and waiting for iscsit_close_connection() to execute "complete(session_wait_comp)". Only one of the threads will wake up and proceed to destroy the session structure, the remaining threads will hang forever. Note that if the blocked threads are somehow forced to wake up with complete_all(), they will try to free the same iscsi session structure destroyed by the first thread, causing double frees, memory corruptions etc... With this patch, the threads that want to destroy the iscsi session will increase the session refcount and will set the "session_close" flag to 1; then they wait for the driver to close the remaining active connections. When the last connection is closed, iscsit_close_connection() will wake up all the threads and will wait for the session's refcount to reach zero; when this happens, iscsit_close_connection() will destroy the session structure because no one is referencing it anymore. INFO: task targetcli:5971 blocked for more than 120 seconds. Tainted: P OE 4.15.0-72-generic #81~16.04.1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. targetcli D 0 5971 1 0x00000080 Call Trace: __schedule+0x3d6/0x8b0 ? vprintk_func+0x44/0xe0 schedule+0x36/0x80 schedule_timeout+0x1db/0x370 ? __dynamic_pr_debug+0x8a/0xb0 wait_for_completion+0xb4/0x140 ? wake_up_q+0x70/0x70 iscsit_free_session+0x13d/0x1a0 [iscsi_target_mod] iscsit_release_sessions_for_tpg+0x16b/0x1e0 [iscsi_target_mod] iscsit_tpg_disable_portal_group+0xca/0x1c0 [iscsi_target_mod] lio_target_tpg_enable_store+0x66/0xe0 [iscsi_target_mod] configfs_write_file+0xb9/0x120 __vfs_write+0x1b/0x40 vfs_write+0xb8/0x1b0 SyS_write+0x5c/0xe0 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Link: https://lore.kernel.org/r/20200313170656.9716-3-mlombard@redhat.com Reported-by: Matt Coleman <mcoleman@datto.com> Tested-by: Matt Coleman <mcoleman@datto.com> Tested-by: Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-21scsi: target: remove boilerplate codeMaurizio Lombardi
[ Upstream commit e49a7d994379278d3353d7ffc7994672752fb0ad ] iscsit_free_session() is equivalent to iscsit_stop_session() followed by a call to iscsit_close_session(). Link: https://lore.kernel.org/r/20200313170656.9716-2-mlombard@redhat.com Tested-by: Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-21x86/resctrl: Fix invalid attempt at removing the default resource groupReinette Chatre
commit b0151da52a6d4f3951ea24c083e7a95977621436 upstream. The default resource group ("rdtgroup_default") is associated with the root of the resctrl filesystem and should never be removed. New resource groups can be created as subdirectories of the resctrl filesystem and they can be removed from user space. There exists a safeguard in the directory removal code (rdtgroup_rmdir()) that ensures that only subdirectories can be removed by testing that the directory to be removed has to be a child of the root directory. A possible deadlock was recently fixed with 334b0f4e9b1b ("x86/resctrl: Fix a deadlock due to inaccurate reference"). This fix involved associating the private data of the "mon_groups" and "mon_data" directories to the resource group to which they belong instead of NULL as before. A consequence of this change was that the original safeguard code preventing removal of "mon_groups" and "mon_data" found in the root directory failed resulting in attempts to remove the default resource group that ends in a BUG: kernel BUG at mm/slub.c:3969! invalid opcode: 0000 [#1] SMP PTI Call Trace: rdtgroup_rmdir+0x16b/0x2c0 kernfs_iop_rmdir+0x5c/0x90 vfs_rmdir+0x7a/0x160 do_rmdir+0x17d/0x1e0 do_syscall_64+0x55/0x1d0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by improving the directory removal safeguard to ensure that subdirectories of the resctrl root directory can only be removed if they are a child of the resctrl filesystem's root _and_ not associated with the default resource group. Fixes: 334b0f4e9b1b ("x86/resctrl: Fix a deadlock due to inaccurate reference") Reported-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/884cbe1773496b5dbec1b6bd11bb50cffa83603d.1584461853.git.reinette.chatre@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21x86/resctrl: Preserve CDP enable over CPU hotplugJames Morse
commit 9fe0450785abbc04b0ed5d3cf61fcdb8ab656b4b upstream. Resctrl assumes that all CPUs are online when the filesystem is mounted, and that CPUs remember their CDP-enabled state over CPU hotplug. This goes wrong when resctrl's CDP-enabled state changes while all the CPUs in a domain are offline. When a domain comes online, enable (or disable!) CDP to match resctrl's current setting. Fixes: 5ff193fbde20 ("x86/intel_rdt: Add basic resctrl filesystem support") Suggested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200221162105.154163-1-james.morse@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21irqchip/ti-sci-inta: Fix processing of masked irqsGrygorii Strashko
commit 3688b0db5c331f4ec3fa5eb9f670a4b04f530700 upstream. The ti_sci_inta_irq_handler() does not take into account INTA IRQs state (masked/unmasked) as it uses INTA_STATUS_CLEAR_j register to get INTA IRQs status, which provides raw status value. This causes hard IRQ handlers to be called or threaded handlers to be scheduled many times even if corresponding INTA IRQ is masked. Above, first of all, affects the LEVEL interrupts processing and causes unexpected behavior up the system stack or crash. Fix it by using the Interrupt Masked Status INTA_STATUSM_j register which provides masked INTA IRQs status. Fixes: 9f1463b86c13 ("irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20200408191532.31252-1-grygorii.strashko@ti.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21ext4: do not zeroout extents beyond i_disksizeJan Kara
commit 801674f34ecfed033b062a0f217506b93c8d5e8a upstream. We do not want to create initialized extents beyond end of file because for e2fsck it is impossible to distinguish them from a case of corrupted file size / extent tree and so it complains like: Inode 12, i_size is 147456, should be 163840. Fix? no Code in ext4_ext_convert_to_initialized() and ext4_split_convert_extents() try to make sure it does not create initialized extents beyond inode size however they check against inode->i_size which is wrong. They should instead check against EXT4_I(inode)->i_disksize which is the current inode size on disk. That's what e2fsck is going to see in case of crash before all dirty data is written. This bug manifests as generic/456 test failure (with recent enough fstests where fsx got fixed to properly pass FALLOC_KEEP_SIZE_FL flags to the kernel) when run with dioread_lock mount option. CC: stable@vger.kernel.org Fixes: 21ca087a3891 ("ext4: Do not zero out uninitialized extents beyond i_size") Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20200331105016.8674-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21i2c: designware: platdrv: Remove DPM_FLAG_SMART_SUSPEND flag on BYT and CHTHans de Goede
commit d79294d0de12ddd1420110813626d691f440b86f upstream. We already set DPM_FLAG_SMART_PREPARE, so we completely skip all callbacks (other then prepare) where possible, quoting from dw_i2c_plat_prepare(): /* * If the ACPI companion device object is present for this device, it * may be accessed during suspend and resume of other devices via I2C * operation regions, so tell the PM core and middle layers to avoid * skipping system suspend/resume callbacks for it in that case. */ return !has_acpi_companion(dev); Also setting the DPM_FLAG_SMART_SUSPEND will cause acpi_subsys_suspend() to leave the controller runtime-suspended even if dw_i2c_plat_prepare() returned 0. Leaving the controller runtime-suspended normally, when the I2C controller is suspended during the suspend_late phase, is not an issue because the pm_runtime_get_sync() done by i2c_dw_xfer() will (runtime-)resume it. But for dw I2C controllers on Bay- and Cherry-Trail devices acpi_lpss.c leaves the controller alive until the suspend_noirq phase, because it may be used by the _PS3 ACPI methods of PCI devices and PCI devices are left powered on until the suspend_noirq phase. Between the suspend_late and resume_early phases runtime-pm is disabled. So for any ACPI I2C OPRegion accesses done after the suspend_late phase, the pm_runtime_get_sync() done by i2c_dw_xfer() is a no-op and the controller is left runtime-suspended. i2c_dw_xfer() has a check to catch this condition (rather then waiting for the I2C transfer to timeout because the controller is suspended). acpi_subsys_suspend() leaving the controller runtime-suspended in combination with an ACPI I2C OPRegion access done after the suspend_late phase triggers this check, leading to the following error being logged on a Bay Trail based Lenovo Thinkpad 8 tablet: [ 93.275882] i2c_designware 80860F41:00: Transfer while suspended [ 93.275993] WARNING: CPU: 0 PID: 412 at drivers/i2c/busses/i2c-designware-master.c:429 i2c_dw_xfer+0x239/0x280 ... [ 93.276252] Workqueue: kacpi_notify acpi_os_execute_deferred [ 93.276267] RIP: 0010:i2c_dw_xfer+0x239/0x280 ... [ 93.276340] Call Trace: [ 93.276366] __i2c_transfer+0x121/0x520 [ 93.276379] i2c_transfer+0x4c/0x100 [ 93.276392] i2c_acpi_space_handler+0x219/0x510 [ 93.276408] ? up+0x40/0x60 [ 93.276419] ? i2c_acpi_notify+0x130/0x130 [ 93.276433] acpi_ev_address_space_dispatch+0x1e1/0x252 ... So since on BYT and CHT platforms we want ACPI I2c OPRegion accesses to work until the suspend_noirq phase, we need the controller to be runtime-resumed during the suspend phase if it is runtime-suspended suspended at that time. This means that we must not set the DPM_FLAG_SMART_SUSPEND on these platforms. On BYT and CHT we already have a special ACCESS_NO_IRQ_SUSPEND flag to make sure the controller stays functional until the suspend_noirq phase. This commit makes the driver not set the DPM_FLAG_SMART_SUSPEND flag when that flag is set. Cc: stable@vger.kernel.org Fixes: b30f2f65568f ("i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21drm/amdgpu: fix the hw hang during perform system reboot and resetPrike Liang
commit b2a7e9735ab2864330be9d00d7f38c961c28de5d upstream. The system reboot failed as some IP blocks enter power gate before perform hw resource destory. Meanwhile use unify interface to set device CGPG to ungate state can simplify the amdgpu poweroff or reset ungate guard. Fixes: 487eca11a321ef ("drm/amdgpu: fix gfx hang during suspend with video playback (v2)") Signed-off-by: Prike Liang <Prike.Liang@amd.com> Tested-by: Mengbing Wang <Mengbing.Wang@amd.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21drm/amd/powerplay: force the trim of the mclk dpm_levels if OD is enabledSergei Lopatin
commit 8c7f0a44b4b4ef16df8f44fbaee6d1f5d1593c83 upstream. Should prevent flicker if PP_OVERDRIVE_MASK is set. bug: https://bugs.freedesktop.org/show_bug.cgi?id=102646 bug: https://bugs.freedesktop.org/show_bug.cgi?id=108941 bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1088 bug: https://gitlab.freedesktop.org/drm/amd/-/issues/628 Signed-off-by: Sergei Lopatin <magist3r@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21net/mlx5e: Use preactivate hook to set the indirection tableMaxim Mikityanskiy
[ Upstream commit fe867cac9e1967c553e4ac2aece5fc8675258010 ] mlx5e_ethtool_set_channels updates the indirection table before switching to the new channels. If the switch fails, the indirection table is new, but the channels are old, which is wrong. Fix it by using the preactivate hook of mlx5e_safe_switch_channels to update the indirection table at the stage when nothing can fail anymore. As the code that updates the indirection table is now encapsulated into a new function, use that function in the attach flow when the driver has to reduce the number of channels, and prepare the code for the next commit. Fixes: 85082dba0a ("net/mlx5e: Correctly handle RSS indirection table when changing number of channels") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-21net/mlx5e: Rename hw_modify to preactivateMaxim Mikityanskiy
[ Upstream commit dca147b3dce5abb5284ff747211960fd2db5ec2e ] mlx5e_safe_switch_channels accepts a callback to be called before activating new channels. It is intended to configure some hardware parameters in cases where channels are recreated because some configuration has changed. Recently, this callback has started being used to update the driver's internal MLX5E_STATE_XDP_OPEN flag, and the following patches also intend to use this callback for software preparations. This patch renames the hw_modify callback to preactivate, so that the name fits better. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-21net/mlx5e: Encapsulate updating netdev queues into a functionMaxim Mikityanskiy
[ Upstream commit c2c95271f9f39ea9b34db2301b3b6c5105cdb447 ] As a preparation for one of the following commits, create a function to encapsulate the code that notifies the kernel about the new amount of RX and TX queues. The code will be called multiple times in the next commit. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-21mac80211_hwsim: Use kstrndup() in place of kasprintf()Tuomas Tynkkynen
commit 7ea862048317aa76d0f22334202779a25530980c upstream. syzbot reports a warning: precision 33020 too large WARNING: CPU: 0 PID: 9618 at lib/vsprintf.c:2471 set_precision+0x150/0x180 lib/vsprintf.c:2471 vsnprintf+0xa7b/0x19a0 lib/vsprintf.c:2547 kvasprintf+0xb2/0x170 lib/kasprintf.c:22 kasprintf+0xbb/0xf0 lib/kasprintf.c:59 hwsim_del_radio_nl+0x63a/0x7e0 drivers/net/wireless/mac80211_hwsim.c:3625 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] ... entry_SYSCALL_64_after_hwframe+0x49/0xbe Thus it seems that kasprintf() with "%.*s" format can not be used for duplicating a string with arbitrary length. Replace it with kstrndup(). Note that later this string is limited to NL80211_WIPHY_NAME_MAXLEN == 64, but the code is simpler this way. Reported-by: syzbot+6693adf1698864d21734@syzkaller.appspotmail.com Reported-by: syzbot+a4aee3f42d7584d76761@syzkaller.appspotmail.com Cc: stable@kernel.org Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Link: https://lore.kernel.org/r/20200410123257.14559-1-tuomas.tynkkynen@iki.fi [johannes: add note about length limit] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21mac80211: fix race in ieee80211_register_hw()Sumit Garg
commit 52e04b4ce5d03775b6a78f3ed1097480faacc9fd upstream. A race condition leading to a kernel crash is observed during invocation of ieee80211_register_hw() on a dragonboard410c device having wcn36xx driver built as a loadable module along with a wifi manager in user-space waiting for a wifi device (wlanX) to be active. Sequence diagram for a particular kernel crash scenario: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | Kernel crash | | due to unallocated | | workqueue. | | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | | ieee80211_if_add() | | | | As evident from above sequence diagram, this race condition isn't specific to a particular wifi driver but rather the initialization sequence in ieee80211_register_hw() needs to be fixed. So re-order the initialization sequence and the updated sequence diagram would look like: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | | | | ieee80211_if_add() | | | | Cc: stable@vger.kernel.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/1586254255-28713-1-git-send-email-sumit.garg@linaro.org [Johannes: fix rtnl imbalances] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21nl80211: fix NL80211_ATTR_FTM_RESPONDER policyJohannes Berg
commit 0e012b4e4b5ec8e064be3502382579dd0bb43269 upstream. The nested policy here should be established using the NLA_POLICY_NESTED() macro so the length is properly filled in. Cc: stable@vger.kernel.org Fixes: 81e54d08d9d8 ("cfg80211: support FTM responder configuration/statistics") Link: https://lore.kernel.org/r/20200412004029.9d0722bb56c8.Ie690bfcc4a1a61ff8d8ca7e475d59fcaa52fb2da@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21btrfs: check commit root generation in should_ignore_rootJosef Bacik
commit 4d4225fc228e46948486d8b8207955f0c031b92e upstream. Previously we would set the reloc root's last snapshot to transid - 1. However there was a problem with doing this, and we changed it to setting the last snapshot to the generation of the commit node of the fs root. This however broke should_ignore_root(). The assumption is that if we are in a generation newer than when the reloc root was created, then we would find the reloc root through normal backref lookups, and thus can ignore any fs roots we find with an old enough reloc root. Now that the last snapshot could be considerably further in the past than before, we'd end up incorrectly ignoring an fs root. Thus we'd find no nodes for the bytenr we were searching for, and we'd fail to relocate anything. We'd loop through the relocate code again and see that there were still used space in that block group, attempt to relocate those bytenr's again, fail in the same way, and just loop like this forever. This is tricky in that we have to not modify the fs root at all during this time, so we need to have a block group that has data in this fs root that is not shared by any other root, which is why this has been difficult to reproduce. Fixes: 054570a1dc94 ("Btrfs: fix relocation incorrectly dropping data references") CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21tracing: Fix the race between registering 'snapshot' event trigger and ↵Xiao Yang
triggering 'snapshot' operation commit 0bbe7f719985efd9adb3454679ecef0984cb6800 upstream. Traced event can trigger 'snapshot' operation(i.e. calls snapshot_trigger() or snapshot_count_trigger()) when register_snapshot_trigger() has completed registration but doesn't allocate buffer for 'snapshot' event trigger. In the rare case, 'snapshot' operation always detects the lack of allocated buffer so make register_snapshot_trigger() allocate buffer first. trigger-snapshot.tc in kselftest reproduces the issue on slow vm: ----------------------------------------------------------- cat trace ... ftracetest-3028 [002] .... 236.784290: sched_process_fork: comm=ftracetest pid=3028 child_comm=ftracetest child_pid=3036 <...>-2875 [003] .... 240.460335: tracing_snapshot_instance_cond: *** SNAPSHOT NOT ALLOCATED *** <...>-2875 [003] .... 240.460338: tracing_snapshot_instance_cond: *** stopping trace here! *** ----------------------------------------------------------- Link: http://lkml.kernel.org/r/20200414015145.66236-1-yangx.jy@cn.fujitsu.com Cc: stable@vger.kernel.org Fixes: 93e31ffbf417a ("tracing: Add 'snapshot' event trigger command") Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21keys: Fix proc_keys_next to increase position indexVasily Averin
commit 86d32f9a7c54ad74f4514d7fef7c847883207291 upstream. If seq_file .next function does not change position index, read after some lseek can generate unexpected output: $ dd if=/proc/keys bs=1 # full usual output 0f6bfdf5 I--Q--- 2 perm 3f010000 1000 1000 user 4af2f79ab8848d0a: 740 1fb91b32 I--Q--- 3 perm 1f3f0000 1000 65534 keyring _uid.1000: 2 27589480 I--Q--- 1 perm 0b0b0000 0 0 user invocation_id: 16 2f33ab67 I--Q--- 152 perm 3f030000 0 0 keyring _ses: 2 33f1d8fa I--Q--- 4 perm 3f030000 1000 1000 keyring _ses: 1 3d427fda I--Q--- 2 perm 3f010000 1000 1000 user 69ec44aec7678e5a: 740 3ead4096 I--Q--- 1 perm 1f3f0000 1000 65534 keyring _uid_ses.1000: 1 521+0 records in 521+0 records out 521 bytes copied, 0,00123769 s, 421 kB/s But a read after lseek in middle of last line results in the partial last line and then a repeat of the final line: $ dd if=/proc/keys bs=500 skip=1 dd: /proc/keys: cannot skip to specified offset g _uid_ses.1000: 1 3ead4096 I--Q--- 1 perm 1f3f0000 1000 65534 keyring _uid_ses.1000: 1 0+1 records in 0+1 records out 97 bytes copied, 0,000135035 s, 718 kB/s and a read after lseek beyond end of file results in the last line being shown: $ dd if=/proc/keys bs=1000 skip=1 # read after lseek beyond end of file dd: /proc/keys: cannot skip to specified offset 3ead4096 I--Q--- 1 perm 1f3f0000 1000 65534 keyring _uid_ses.1000: 1 0+1 records in 0+1 records out 76 bytes copied, 0,000119981 s, 633 kB/s See https://bugzilla.kernel.org/show_bug.cgi?id=206283 Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21arm64: vdso: don't free unallocated pagesMark Rutland
commit 9cc3d0c6915aee5140f8335d41bbc3ff1b79aa4e upstream. The aarch32_vdso_pages[] array never has entries allocated in the C_VVAR or C_VDSO slots, and as the array is zero initialized these contain NULL. However in __aarch32_alloc_vdso_pages() when aarch32_alloc_kuser_vdso_page() fails we attempt to free the page whose struct page is at NULL, which is obviously nonsensical. This patch removes the erroneous page freeing. Fixes: 7c1deeeb0130 ("arm64: compat: VDSO setup for compat layer") Cc: <stable@vger.kernel.org> # 5.3.x- Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21ALSA: usb-audio: Check mapping at creating connector controls, tooTakashi Iwai
commit 934b96594ed66b07dbc7e576d28814466df3a494 upstream. Add the mapping check to build_connector_control() so that the device specific quirk can provide the node to skip for the badly behaving connector controls. As an example, ALC1220-VB-based codec implements the skip entry for the broken SPDIF connector detection. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200412081331.4742-5-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21ALSA: usb-audio: Don't create jack controls for PCM terminalsTakashi Iwai
commit 7dc3c5a0172e6c0449502103356c3628d05bc0e0 upstream. Some funky firmwares set the connector flag even on PCM terminals although it doesn't make sense (and even actually the firmware doesn't react properly!). Let's skip creation of jack controls in such a case. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200412081331.4742-4-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21ALSA: usb-audio: Don't override ignore_ctl_error value from the mapTakashi Iwai
commit 3507245b82b4362dc9721cbc328644905a3efa22 upstream. The mapping table may contain also ignore_ctl_error flag for devices that are known to behave wild. Since this flag always writes the card's own ignore_ctl_error flag, it overrides the value already set by the module option, so it doesn't follow user's expectation. Let's fix the code not to clear the flag that has been set by user. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200412081331.4742-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21ALSA: usb-audio: Filter error from connector kctl ops, tooTakashi Iwai
commit 48cc42973509afac24e83d6edc23901d102872d1 upstream. The ignore_ctl_error option should filter the error at kctl accesses, but there was an overlook: mixer_ctl_connector_get() returns an error from the request. This patch covers the forgotten code path and apply filter_error() properly. The locking error is still returned since this is a fatal error that has to be reported even with ignore_ctl_error option. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200412081331.4742-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21ALSA: hda/realtek - Enable the headset mic on Asus FX505DTAdam Barber
commit 4963d66b8a26c489958063abb6900ea6ed8e4836 upstream. On Asus FX505DT with Realtek ALC233, the headset mic is connected to pin 0x19, with default 0x411111f0. Enable headset mic by reconfiguring the pin to an external mic associated with the headphone on 0x21. Mic jack detection was also found to be working. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207131 Signed-off-by: Adam Barber <barberadam995@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200410090032.2759-1-barberadam995@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21ASoC: Intel: mrfld: return error codes when an error occursColin Ian King
commit 3025571edd9df653e1ad649f0638368a39d1bbb5 upstream. Currently function sst_platform_get_resources always returns zero and error return codes set by the function are never returned. Fix this by returning the error return code in variable ret rather than the hard coded zero. Addresses-Coverity: ("Unused value") Fixes: f533a035e4da ("ASoC: Intel: mrfld - create separate module for pci part") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200208220720.36657-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21ASoC: Intel: mrfld: fix incorrect check on p->sinkColin Ian King
commit f5e056e1e46fcbb5f74ce560792aeb7d57ce79e6 upstream. The check on p->sink looks bogus, I believe it should be p->source since the following code blocks are related to p->source. Fix this by replacing p->sink with p->source. Fixes: 24c8d14192cc ("ASoC: Intel: mrfld: add DSP core controls") Signed-off-by: Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Copy-paste error") Link: https://lore.kernel.org/r/20191119113640.166940-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 02:24:10 +0000