summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-12Linux 5.4.140v5.4.140Greg Kroah-Hartman
Link: https://lore.kernel.org/r/20210810172948.192298392@linuxfoundation.org Tested-by: Hulk Robot <hulkrobot@huawei.com> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12arm64: fix compat syscall return truncationMark Rutland
commit e30e8d46cf605d216a799a28c77b8a41c328613a upstream. Due to inconsistencies in the way we manipulate compat GPRs, we have a few issues today: * For audit and tracing, where error codes are handled as a (native) long, negative error codes are expected to be sign-extended to the native 64-bits, or they may fail to be matched correctly. Thus a syscall which fails with an error may erroneously be identified as failing. * For ptrace, *all* compat return values should be sign-extended for consistency with 32-bit arm, but we currently only do this for negative return codes. * As we may transiently set the upper 32 bits of some compat GPRs while in the kernel, these can be sampled by perf, which is somewhat confusing. This means that where a syscall returns a pointer above 2G, this will be sign-extended, but will not be mistaken for an error as error codes are constrained to the inclusive range [-4096, -1] where no user pointer can exist. To fix all of these, we must consistently use helpers to get/set the compat GPRs, ensuring that we never write the upper 32 bits of the return code, and always sign-extend when reading the return code. This patch does so, with the following changes: * We re-organise syscall_get_return_value() to always sign-extend for compat tasks, and reimplement syscall_get_error() atop. We update syscall_trace_exit() to use syscall_get_return_value(). * We consistently use syscall_set_return_value() to set the return value, ensureing the upper 32 bits are never set unexpectedly. * As the core audit code currently uses regs_return_value() rather than syscall_get_return_value(), we special-case this for compat_user_mode(regs) such that this will do the right thing. Going forward, we should try to move the core audit code over to syscall_get_return_value(). Cc: <stable@vger.kernel.org> Reported-by: He Zhe <zhe.he@windriver.com> Reported-by: weiyuchen <weiyuchen3@huawei.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20210802104200.21390-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org> [Mark: trivial conflict resolution for v5.4.y] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ↵Letu Ren
ql_adapter_reset [ Upstream commit 92766c4628ea349c8ddab0cd7bd0488f36e5c4ce ] When calling the 'ql_wait_for_drvr_lock' and 'ql_adapter_reset', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. Reported-by: Letu Ren <fantasquex@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12alpha: Send stop IPI to send to online CPUsPrarit Bhargava
[ Upstream commit caace6ca4e06f09413fb8f8a63319594cfb7d47d ] This issue was noticed while debugging a shutdown issue where some secondary CPUs are not being shutdown correctly. A fix for that [1] requires that secondary cpus be offlined using the cpu_online_mask so that the stop operation is a no-op if CPU HOTPLUG is disabled. I, like the author in [1] looked at the architectures and found that alpha is one of two architectures that executes smp_send_stop() on all possible CPUs. On alpha, smp_send_stop() sends an IPI to all possible CPUs but only needs to send them to online CPUs. Send the stop IPI to only the online CPUs. [1] https://lkml.org/lkml/2020/1/10/250 Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12virt_wifi: fix error on connectMatteo Croce
[ Upstream commit 17109e9783799be2a063b2bd861a508194b0a487 ] When connecting without first doing a scan, the BSS list is empty and __cfg80211_connect_result() generates this warning: $ iw dev wlan0 connect -w VirtWifi [ 15.371989] ------------[ cut here ]------------ [ 15.372179] WARNING: CPU: 0 PID: 92 at net/wireless/sme.c:756 __cfg80211_connect_result+0x402/0x440 [ 15.372383] CPU: 0 PID: 92 Comm: kworker/u2:2 Not tainted 5.13.0-kvm #444 [ 15.372512] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-3.fc34 04/01/2014 [ 15.372597] Workqueue: cfg80211 cfg80211_event_work [ 15.372756] RIP: 0010:__cfg80211_connect_result+0x402/0x440 [ 15.372818] Code: 48 2b 04 25 28 00 00 00 75 59 48 8b 3b 48 8b 76 10 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d 49 8d 65 f0 41 5d e9 d0 d4 fd ff 0f 0b <0f> 0b e9 f6 fd ff ff e8 f2 4a b4 ff e9 ec fd ff ff 0f 0b e9 19 fd [ 15.372966] RSP: 0018:ffffc900005cbdc0 EFLAGS: 00010246 [ 15.373022] RAX: 0000000000000000 RBX: ffff8880028e2400 RCX: ffff8880028e2472 [ 15.373088] RDX: 0000000000000002 RSI: 00000000fffffe01 RDI: ffffffff815335ba [ 15.373149] RBP: ffffc900005cbe00 R08: 0000000000000008 R09: ffff888002bdf8b8 [ 15.373209] R10: ffff88803ec208f0 R11: ffffffffffffe9ae R12: ffff88801d687d98 [ 15.373280] R13: ffff88801b5fe000 R14: ffffc900005cbdc0 R15: dead000000000100 [ 15.373330] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 15.373382] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.373425] CR2: 000056421c468958 CR3: 000000001b458001 CR4: 0000000000170eb0 [ 15.373478] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 15.373529] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 15.373580] Call Trace: [ 15.373611] ? cfg80211_process_wdev_events+0x10e/0x170 [ 15.373743] cfg80211_process_wdev_events+0x10e/0x170 [ 15.373783] cfg80211_process_rdev_events+0x21/0x40 [ 15.373846] cfg80211_event_work+0x20/0x30 [ 15.373892] process_one_work+0x1e9/0x340 [ 15.373956] worker_thread+0x4b/0x3f0 [ 15.374017] ? process_one_work+0x340/0x340 [ 15.374053] kthread+0x11f/0x140 [ 15.374089] ? set_kthread_struct+0x30/0x30 [ 15.374153] ret_from_fork+0x1f/0x30 [ 15.374187] ---[ end trace 321ef0cb7e9c0be1 ]--- wlan0 (phy #0): connected to 00:00:00:00:00:00 Add the fake bss just before the connect so that cfg80211_get_bss() finds the virtual network. As some code was duplicated, move it in a common function. Signed-off-by: Matteo Croce <mcroce@microsoft.com> Link: https://lore.kernel.org/r/20210706154423.11065-1-mcroce@linux.microsoft.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12reiserfs: check directory items on read from diskShreyansh Chouhan
[ Upstream commit 13d257503c0930010ef9eed78b689cec417ab741 ] While verifying the leaf item that we read from the disk, reiserfs doesn't check the directory items, this could cause a crash when we read a directory item from the disk that has an invalid deh_location. This patch adds a check to the directory items read from the disk that does a bounds check on deh_location for the directory entries. Any directory entry header with a directory entry offset greater than the item length is considered invalid. Link: https://lore.kernel.org/r/20210709152929.766363-1-chouhan.shreyansh630@gmail.com Reported-by: syzbot+c31a48e6702ccb3d64c9@syzkaller.appspotmail.com Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12reiserfs: add check for root_inode in reiserfs_fill_superYu Kuai
[ Upstream commit 2acf15b94d5b8ea8392c4b6753a6ffac3135cd78 ] Our syzcaller report a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 116e95067 P4D 116e95067 PUD 1080b5067 PMD 0 Oops: 0010 [#1] SMP KASAN CPU: 7 PID: 592 Comm: a.out Not tainted 5.13.0-next-20210629-dirty #67 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-p4 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffff888114e779b8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 1ffff110229cef39 RCX: ffffffffaa67e1aa RDX: 0000000000000000 RSI: ffff88810a58ee00 RDI: ffff8881233180b0 RBP: ffffffffac38e9c0 R08: ffffffffaa67e17e R09: 0000000000000001 R10: ffffffffb91c5557 R11: fffffbfff7238aaa R12: ffff88810a58ee00 R13: ffff888114e77aa0 R14: 0000000000000000 R15: ffff8881233180b0 FS: 00007f946163c480(0000) GS:ffff88839f1c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000001099c1000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __lookup_slow+0x116/0x2d0 ? page_put_link+0x120/0x120 ? __d_lookup+0xfc/0x320 ? d_lookup+0x49/0x90 lookup_one_len+0x13c/0x170 ? __lookup_slow+0x2d0/0x2d0 ? reiserfs_schedule_old_flush+0x31/0x130 reiserfs_lookup_privroot+0x64/0x150 reiserfs_fill_super+0x158c/0x1b90 ? finish_unfinished+0xb10/0xb10 ? bprintf+0xe0/0xe0 ? __mutex_lock_slowpath+0x30/0x30 ? __kasan_check_write+0x20/0x30 ? up_write+0x51/0xb0 ? set_blocksize+0x9f/0x1f0 mount_bdev+0x27c/0x2d0 ? finish_unfinished+0xb10/0xb10 ? reiserfs_kill_sb+0x120/0x120 get_super_block+0x19/0x30 legacy_get_tree+0x76/0xf0 vfs_get_tree+0x49/0x160 ? capable+0x1d/0x30 path_mount+0xacc/0x1380 ? putname+0x97/0xd0 ? finish_automount+0x450/0x450 ? kmem_cache_free+0xf8/0x5a0 ? putname+0x97/0xd0 do_mount+0xe2/0x110 ? path_mount+0x1380/0x1380 ? copy_mount_options+0x69/0x140 __x64_sys_mount+0xf0/0x190 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae This is because 'root_inode' is initialized with wrong mode, and it's i_op is set to 'reiserfs_special_inode_operations'. Thus add check for 'root_inode' to fix the problem. Link: https://lore.kernel.org/r/20210702040743.1918552-1-yukuai3@huawei.com Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12libata: fix ata_pio_sector for CONFIG_HIGHMEMChristoph Hellwig
[ Upstream commit ecef6a9effe49e8e2635c839020b9833b71e934c ] Data transfers are not required to be block aligned in memory, so they span two pages. Fix this by splitting the call to >sff_data_xfer into two for that case. This has been broken since the initial libata import before the damn of git, but was uncovered by the legacy ide driver removal. Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210709130237.3730959-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12bpf, selftests: Adjust few selftest result_unpriv outcomesDaniel Borkmann
commit 1bad6fd52be4ce12d207e2820ceb0f29ab31fc53 upstream. Given we don't need to simulate the speculative domain for registers with immediates anymore since the verifier uses direct imm-based rewrites instead of having to mask, we can also lift a few cases that were previously rejected. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> [OP: backport to 5.4, small context adjustment in stack_ptr.c] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guestLike Xu
commit df51fe7ea1c1c2c3bfdb81279712fdd2e4ea6c27 upstream. If we use "perf record" in an AMD Milan guest, dmesg reports a #GP warning from an unchecked MSR access error on MSR_F15H_PERF_CTLx: [] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000110076) at rIP: 0xffffffff8106ddb4 (native_write_msr+0x4/0x20) [] Call Trace: [] amd_pmu_disable_event+0x22/0x90 [] x86_pmu_stop+0x4c/0xa0 [] x86_pmu_del+0x3a/0x140 The AMD64_EVENTSEL_HOSTONLY bit is defined and used on the host, while the guest perf driver should avoid such use. Fixes: 1018faa6cf23 ("perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled") Signed-off-by: Like Xu <likexu@tencent.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Tested-by: Kim Phillips <kim.phillips@amd.com> Tested-by: Liam Merwick <liam.merwick@oracle.com> Link: https://lkml.kernel.org/r/20210802070850.35295-1-likexu@tencent.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12soc: ixp4xx/qmgr: fix invalid __iomem accessArnd Bergmann
commit a8eee86317f11e97990d755d4615c1c0db203d08 upstream. Sparse reports a compile time warning when dereferencing an __iomem pointer: drivers/soc/ixp4xx/ixp4xx-qmgr.c:149:37: warning: dereference of noderef expression drivers/soc/ixp4xx/ixp4xx-qmgr.c:153:40: warning: dereference of noderef expression drivers/soc/ixp4xx/ixp4xx-qmgr.c:154:40: warning: dereference of noderef expression drivers/soc/ixp4xx/ixp4xx-qmgr.c:174:38: warning: dereference of noderef expression drivers/soc/ixp4xx/ixp4xx-qmgr.c:174:44: warning: dereference of noderef expression Use __raw_readl() here for consistency with the rest of the file. This should really get converted to some proper accessor, as the __raw functions are not meant to be used in drivers, but the driver has used these since the start, so for the moment, let's only fix the warning. Reported-by: kernel test robot <lkp@intel.com> Fixes: d4c9e9fc9751 ("IXP42x: Add QMgr support for IXP425 rev. A0 processors.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12spi: meson-spicc: fix memory leak in meson_spicc_removeDongliang Mu
commit 8311ee2164c5cd1b63a601ea366f540eae89f10e upstream. In meson_spicc_probe, the error handling code needs to clean up master by calling spi_master_put, but the remove function does not have this function call. This will lead to memory leak of spicc->master. Reported-by: Dongliang Mu <mudongliangabcd@gmail.com> Fixes: 454fa271bc4e("spi: Add Meson SPICC driver") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Link: https://lore.kernel.org/r/20210720100116.1438974-1-mudongliangabcd@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12soc: ixp4xx: fix printing resourcesArnd Bergmann
commit 8861452b2097bb0b5d0081a1c137fb3870b0a31f upstream. When compile-testing with 64-bit resource_size_t, gcc reports an invalid printk format string: In file included from include/linux/dma-mapping.h:7, from drivers/soc/ixp4xx/ixp4xx-npe.c:15: drivers/soc/ixp4xx/ixp4xx-npe.c: In function 'ixp4xx_npe_probe': drivers/soc/ixp4xx/ixp4xx-npe.c:694:18: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=] dev_info(dev, "NPE%d at 0x%08x-0x%08x not available\n", Use the special %pR format string to print the resources. Fixes: 0b458d7b10f8 ("soc: ixp4xx: npe: Pass addresses as resources") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12arm64: vdso: Avoid ISB after reading from cntvct_el0Will Deacon
commit 77ec462536a13d4b428a1eead725c4818a49f0b1 upstream. We can avoid the expensive ISB instruction after reading the counter in the vDSO gettime functions by creating a fake address hazard against a dummy stack read, just like we do inside the kernel. Signed-off-by: Will Deacon <will@kernel.org> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://lore.kernel.org/r/20210318170738.7756-5-will@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
2021-08-12KVM: x86/mmu: Fix per-cpu counter corruption on 32-bit buildsSean Christopherson
commit d5aaad6f83420efb8357ac8e11c868708b22d0a9 upstream. Take a signed 'long' instead of an 'unsigned long' for the number of pages to add/subtract to the total number of pages used by the MMU. This fixes a zero-extension bug on 32-bit kernels that effectively corrupts the per-cpu counter used by the shrinker. Per-cpu counters take a signed 64-bit value on both 32-bit and 64-bit kernels, whereas kvm_mod_used_mmu_pages() takes an unsigned long and thus an unsigned 32-bit value on 32-bit kernels. As a result, the value used to adjust the per-cpu counter is zero-extended (unsigned -> signed), not sign-extended (signed -> signed), and so KVM's intended -1 gets morphed to 4294967295 and effectively corrupts the counter. This was found by a staggering amount of sheer dumb luck when running kvm-unit-tests on a 32-bit KVM build. The shrinker just happened to kick in while running tests and do_shrink_slab() logged an error about trying to free a negative number of objects. The truly lucky part is that the kernel just happened to be a slightly stale build, as the shrinker no longer yells about negative objects as of commit 18bb473e5031 ("mm: vmscan: shrink deferred objects proportional to priority"). vmscan: shrink_slab: mmu_shrink_scan+0x0/0x210 [kvm] negative objects to delete nr=-858993460 Fixes: bc8a3d8925a8 ("kvm: mmu: Fix overflow on kvm mmu page limit calculation") Cc: stable@vger.kernel.org Cc: Ben Gardon <bgardon@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210804214609.1096003-1-seanjc@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12KVM: Do not leak memory for duplicate debugfs directoriesPaolo Bonzini
commit 85cd39af14f498f791d8aab3fbd64cd175787f1a upstream. KVM creates a debugfs directory for each VM in order to store statistics about the virtual machine. The directory name is built from the process pid and a VM fd. While generally unique, it is possible to keep a file descriptor alive in a way that causes duplicate directories, which manifests as these messages: [ 471.846235] debugfs: Directory '20245-4' with parent 'kvm' already present! Even though this should not happen in practice, it is more or less expected in the case of KVM for testcases that call KVM_CREATE_VM and close the resulting file descriptor repeatedly and in parallel. When this happens, debugfs_create_dir() returns an error but kvm_create_vm_debugfs() goes on to allocate stat data structs which are later leaked. The slow memory leak was spotted by syzkaller, where it caused OOM reports. Since the issue only affects debugfs, do a lookup before calling debugfs_create_dir, so that the message is downgraded and rate-limited. While at it, ensure kvm->debugfs_dentry is NULL rather than an error if it is not created. This fixes kvm_destroy_vm_debugfs, which was not checking IS_ERR_OR_NULL correctly. Cc: stable@vger.kernel.org Fixes: 536a6f88c49d ("KVM: Create debugfs dir and stat files for each VM") Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12KVM: x86: accept userspace interrupt only if no event is injectedPaolo Bonzini
commit fa7a549d321a4189677b0cea86e58d9db7977f7b upstream. Once an exception has been injected, any side effects related to the exception (such as setting CR2 or DR6) have been taked place. Therefore, once KVM sets the VM-entry interruption information field or the AMD EVENTINJ field, the next VM-entry must deliver that exception. Pending interrupts are processed after injected exceptions, so in theory it would not be a problem to use KVM_INTERRUPT when an injected exception is present. However, DOSEMU is using run->ready_for_interrupt_injection to detect interrupt windows and then using KVM_SET_SREGS/KVM_SET_REGS to inject the interrupt manually. For this to work, the interrupt window must be delayed after the completion of the previous event injection. Cc: stable@vger.kernel.org Reported-by: Stas Sergeev <stsp2@yandex.ru> Tested-by: Stas Sergeev <stsp2@yandex.ru> Fixes: 71cc849b7093 ("KVM: x86: Fix split-irqchip vs interrupt injection window request") Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12md/raid10: properly indicate failure when ending a failed write requestWei Shuyu
commit 5ba03936c05584b6f6f79be5ebe7e5036c1dd252 upstream. Similar to [1], this patch fixes the same bug in raid10. Also cleanup the comments. [1] commit 2417b9869b81 ("md/raid1: properly indicate failure when ending a failed write request") Cc: stable@vger.kernel.org Fixes: 7cee6d4e6035 ("md/raid10: end bio when the device faulty") Signed-off-by: Wei Shuyu <wsy@dogben.com> Acked-by: Guoqing Jiang <jiangguoqing@kylinos.cn> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12pcmcia: i82092: fix a null pointer dereference bugZheyu Ma
commit e39cdacf2f664b09029e7c1eb354c91a20c367af upstream. During the driver loading process, the 'dev' field was not assigned, but the 'dev' field was referenced in the subsequent 'i82092aa_set_mem_map' function. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> CC: <stable@vger.kernel.org> [linux@dominikbrodowski.net: shorten commit message, add Cc to stable] Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12timers: Move clearing of base::timer_running under base:: LockThomas Gleixner
commit bb7262b295472eb6858b5c49893954794027cd84 upstream. syzbot reported KCSAN data races vs. timer_base::timer_running being set to NULL without holding base::lock in expire_timers(). This looks innocent and most reads are clearly not problematic, but Frederic identified an issue which is: int data = 0; void timer_func(struct timer_list *t) { data = 1; } CPU 0 CPU 1 ------------------------------ -------------------------- base = lock_timer_base(timer, &flags); raw_spin_unlock(&base->lock); if (base->running_timer != timer) call_timer_fn(timer, fn, baseclk); ret = detach_if_pending(timer, base, true); base->running_timer = NULL; raw_spin_unlock_irqrestore(&base->lock, flags); raw_spin_lock(&base->lock); x = data; If the timer has previously executed on CPU 1 and then CPU 0 can observe base->running_timer == NULL and returns, assuming the timer has completed, but it's not guaranteed on all architectures. The comment for del_timer_sync() makes that guarantee. Moving the assignment under base->lock prevents this. For non-RT kernel it's performance wise completely irrelevant whether the store happens before or after taking the lock. For an RT kernel moving the store under the lock requires an extra unlock/lock pair in the case that there is a waiter for the timer, but that's not the end of the world. Reported-by: syzbot+aa7c2385d46c5eba0b89@syzkaller.appspotmail.com Reported-by: syzbot+abea4558531bae1ba9fe@syzkaller.appspotmail.com Fixes: 030dcdd197d7 ("timers: Prepare support for PREEMPT_RT") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/87lfea7gw8.fsf@nanos.tec.linutronix.de Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12serial: 8250_pci: Avoid irq sharing for MSI(-X) interrupts.Mario Kleiner
commit 341abd693d10e5f337a51f140ae3e7a1ae0febf6 upstream. This attempts to fix a bug found with a serial port card which uses an MCS9922 chip, one of the 4 models for which MSI-X interrupts are currently supported. I don't possess such a card, and i'm not experienced with the serial subsystem, so this patch is based on what i think i found as a likely reason for failure, based on walking the user who actually owns the card through some diagnostic. The user who reported the problem finds the following in his dmesg output for the relevant ttyS4 and ttyS5: [ 0.580425] serial 0000:02:00.0: enabling device (0000 -> 0003) [ 0.601448] 0000:02:00.0: ttyS4 at I/O 0x3010 (irq = 125, base_baud = 115200) is a ST16650V2 [ 0.603089] serial 0000:02:00.1: enabling device (0000 -> 0003) [ 0.624119] 0000:02:00.1: ttyS5 at I/O 0x3000 (irq = 126, base_baud = 115200) is a ST16650V2 ... [ 6.323784] genirq: Flags mismatch irq 128. 00000080 (ttyS5) vs. 00000000 (xhci_hcd) [ 6.324128] genirq: Flags mismatch irq 128. 00000080 (ttyS5) vs. 00000000 (xhci_hcd) ... Output of setserial -a: /dev/ttyS4, Line 4, UART: 16650V2, Port: 0x3010, IRQ: 127 Baud_base: 115200, close_delay: 50, divisor: 0 closing_wait: 3000 Flags: spd_normal skip_test This suggests to me that the serial driver wants to register and share a MSI/MSI-X irq 128 with the xhci_hcd driver, whereas the xhci driver does not want to share the irq, as flags 0x00000080 (== IRQF_SHARED) from the serial port driver means to share the irq, and this mismatch ends in some failed irq init? With this setup, data reception works very unreliable, with dropped data, already at a transmission rate of only a 16 Bytes chunk every 1/120th of a second, ie. 1920 Bytes/sec, presumably due to rx fifo overflow due to mishandled or not used at all rx irq's? See full discussion thread with attempted diagnosis at: https://psychtoolbox.discourse.group/t/issues-with-iscan-serial-port-recording/3886 Disabling the use of MSI interrupts for the serial port pci card did fix the reliability problems. The user executed the following sequence of commands to achieve this: echo 0000:02:00.0 | sudo tee /sys/bus/pci/drivers/serial/unbind echo 0000:02:00.1 | sudo tee /sys/bus/pci/drivers/serial/unbind echo 0 | sudo tee /sys/bus/pci/devices/0000:02:00.0/msi_bus echo 0 | sudo tee /sys/bus/pci/devices/0000:02:00.1/msi_bus echo 0000:02:00.0 | sudo tee /sys/bus/pci/drivers/serial/bind echo 0000:02:00.1 | sudo tee /sys/bus/pci/drivers/serial/bind This resulted in the following log output: [ 82.179021] pci 0000:02:00.0: MSI/MSI-X disallowed for future drivers [ 87.003031] pci 0000:02:00.1: MSI/MSI-X disallowed for future drivers [ 98.537010] 0000:02:00.0: ttyS4 at I/O 0x3010 (irq = 17, base_baud = 115200) is a ST16650V2 [ 103.648124] 0000:02:00.1: ttyS5 at I/O 0x3000 (irq = 18, base_baud = 115200) is a ST16650V2 This patch attempts to fix the problem by disabling irq sharing when using MSI irq's. Note that all i know for sure is that disabling MSI irq's fixed the problem for the user, so this patch could be wrong and is untested. Please review with caution, keeping this in mind. Fixes: 8428413b1d14 ("serial: 8250_pci: Implement MSI(-X) support") Cc: Ralf Ramsauer <ralf.ramsauer@oth-regensburg.de> Cc: stable <stable@vger.kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Link: https://lore.kernel.org/r/20210729043306.18528-1-mario.kleiner.de@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12serial: 8250_pci: Enumerate Elkhart Lake UARTs via dedicated driverAndy Shevchenko
commit 7f0909db761535aefafa77031062603a71557267 upstream. Elkhart Lake UARTs are PCI enumerated Synopsys DesignWare v4.0+ UART integrated with Intel iDMA 32-bit DMA controller. There is a specific driver to handle them, i.e. 8250_lpss. Hence, disable 8250_pci enumeration for these UARTs. Fixes: 1b91d97c66ef ("serial: 8250_lpss: Add ->setup() for Elkhart Lake ports") Fixes: 4f912b898dc2 ("serial: 8250_lpss: Enable HS UART on Elkhart Lake") Cc: stable <stable@vger.kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210713101739.36962-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12MIPS: Malta: Do not byte-swap accesses to the CBUS UARTMaciej W. Rozycki
commit 9a936d6c3d3d6c33ecbadf72dccdb567b5cd3c72 upstream. Correct big-endian accesses to the CBUS UART, a Malta on-board discrete TI16C550C part wired directly to the system controller's device bus, and do not use byte swapping with the 32-bit accesses to the device. The CBUS is used for devices such as the boot flash memory needed early on in system bootstrap even before PCI has been initialised. Therefore it uses the system controller's device bus, which follows the endianness set with the CPU, which means no byte-swapping is ever required for data accesses to CBUS, unlike with PCI. The CBUS UART uses the UPIO_MEM32 access method, that is the `readl' and `writel' MMIO accessors, which on the MIPS platform imply byte-swapping with PCI systems. Consequently the wrong byte lane is accessed with the big-endian configuration and the UART is not correctly accessed. As it happens the UPIO_MEM32BE access method makes use of the `ioread32' and `iowrite32' MMIO accessors, which still use `readl' and `writel' respectively, however they byte-swap data passed, effectively cancelling swapping done with the accessors themselves and making it suitable for the CBUS UART. Make the CBUS UART switch between UPIO_MEM32 and UPIO_MEM32BE then, based on the endianness selected. With this change in place the device is correctly recognised with big-endian Malta at boot, along with the Super I/O devices behind PCI: Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled printk: console [ttyS0] disabled serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A printk: console [ttyS0] enabled printk: bootconsole [uart8250] disabled serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A serial8250.0: ttyS2 at MMIO 0x1f000900 (irq = 20, base_baud = 230400) is a 16550A Fixes: e7c4782f92fc ("[MIPS] Put an end to <asm/serial.h>'s long and annyoing existence") Cc: stable@vger.kernel.org # v2.6.23+ Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260524430.37803@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12serial: 8250: Mask out floating 16/32-bit bus bitsMaciej W. Rozycki
commit e5227c51090e165db4b48dcaa300605bfced7014 upstream. Make sure only actual 8 bits of the IIR register are used in determining the port type in `autoconfig'. The `serial_in' port accessor returns the `unsigned int' type, meaning that with UPIO_AU, UPIO_MEM16, UPIO_MEM32, and UPIO_MEM32BE access types more than 8 bits of data are returned, of which the high order bits will often come from bus lines that are left floating in the data phase. For example with the MIPS Malta board's CBUS UART, where the registers are aligned on 8-byte boundaries and which uses 32-bit accesses, data as follows is returned: YAMON> dump -32 0xbf000900 0x40 BF000900: 1F000942 1F000942 1F000900 1F000900 ...B...B........ BF000910: 1F000901 1F000901 1F000900 1F000900 ................ BF000920: 1F000900 1F000900 1F000960 1F000960 ...........`...` BF000930: 1F000900 1F000900 1F0009FF 1F0009FF ................ YAMON> Evidently high-order 24 bits return values previously driven in the address phase (the 3 highest order address bits used with the command above are masked out in the simple virtual address mapping used here and come out at zeros on the external bus), a common scenario with bus lines left floating, due to bus capacitance. Consequently when the value of IIR, mapped at 0x1f000910, is retrieved in `autoconfig', it comes out at 0x1f0009c1 and when it is right-shifted by 6 and then assigned to 8-bit `scratch' variable, the value calculated is 0x27, not one of 0, 1, 2, 3 expected in port type determination. Fix the issue then, by assigning the value returned from `serial_in' to `scratch' first, which masks out 24 high-order bits retrieved, and only then right-shift the resulting 8-bit data quantity, producing the value of 3 in this case, as expected. Fix the same issue in `serial_dl_read'. The problem first appeared with Linux 2.6.9-rc3 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git> as commit e0d2356c0777 ("Merge with Linux 2.6.9-rc3."), where code in `serial_in' was updated with this case: + case UPIO_MEM32: + return readl(up->port.membase + offset); + which made it produce results outside the unsigned 8-bit range for the first time, though obviously it is system dependent what actual values appear in the high order bits retrieved and it may well have been zeros in the relevant positions with the system the change originally was intended for. It is at that point that code in `autoconf' should have been updated accordingly, but clearly it was overlooked. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260516220.37803@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12serial: 8250_mtk: fix uart corruption issue when rx power offZhiyong Tao
commit 7c4a509d3815a260c423c0633bd73695250ac26d upstream. Fix uart corruption issue when rx power off. Add spin lock in mtk8250_dma_rx_complete function in APDMA mode. when uart is used as a communication port with external device(GPS). when external device(GPS) power off, the power of rx pin is also from 1.8v to 0v. Even if there is not any data in rx. But uart rx pin can capture the data "0". If uart don't receive any data in specified cycle, uart will generates BI(Break interrupt) interrupt. If external device(GPS) power off, we found that BI interrupt appeared continuously and very frequently. When uart interrupt type is BI, uart IRQ handler(8250 framwork API:serial8250_handle_irq) will push data to tty buffer. mtk8250_dma_rx_complete is a task of mtk_uart_apdma_rx_handler. mtk8250_dma_rx_complete priority is lower than uart irq handler(serial8250_handle_irq). if we are in process of mtk8250_dma_rx_complete, uart appear BI interrupt:1)serial8250_handle_irq will priority execution.2)it may cause write tty buffer conflict in mtk8250_dma_rx_complete. So the spin lock protect the rx receive data process is not break. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210729084640.17613-2-zhiyong.tao@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12serial: tegra: Only print FIFO error message when an error occursJon Hunter
commit cc9ca4d95846cbbece48d9cd385550f8fba6a3c1 upstream. The Tegra serial driver always prints an error message when enabling the FIFO for devices that have support for checking the FIFO enable status. Fix this by displaying the error message, only when an error occurs. Finally, update the error message to make it clear that enabling the FIFO failed and display the error code. Fixes: 222dcdff3405 ("serial: tegra: check for FIFO mode enabled status") Cc: <stable@vger.kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20210630125643.264264-1-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12ext4: fix potential htree corruption when growing large_dir directoriesTheodore Ts'o
commit 877ba3f729fd3d8ef0e29bc2a55e57cfa54b2e43 upstream. Commit b5776e7524af ("ext4: fix potential htree index checksum corruption) removed a required restart when multiple levels of index nodes need to be split. Fix this to avoid directory htree corruptions when using the large_dir feature. Cc: stable@kernel.org # v5.11 Cc: Благодаренко Артём <artem.blagodarenko@gmail.com> Fixes: b5776e7524af ("ext4: fix potential htree index checksum corruption) Reported-by: Denis <denis@voxelsoft.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12pipe: increase minimum default pipe size to 2 pagesAlex Xu (Hello71)
commit 46c4c9d1beb7f5b4cec4dd90e7728720583ee348 upstream. This program always prints 4096 and hangs before the patch, and always prints 8192 and exits successfully after: int main() { int pipefd[2]; for (int i = 0; i < 1025; i++) if (pipe(pipefd) == -1) return 1; size_t bufsz = fcntl(pipefd[1], F_GETPIPE_SZ); printf("%zd\n", bufsz); char *buf = calloc(bufsz, 1); write(pipefd[1], buf, bufsz); read(pipefd[0], buf, bufsz-1); write(pipefd[1], buf, 1); } Note that you may need to increase your RLIMIT_NOFILE before running the program. Fixes: 759c01142a ("pipe: limit the per-user amount of pages allocated in pipes") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/ Link: https://lore.kernel.org/lkml/1628127094.lxxn016tj7.none@localhost/ Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12media: rtl28xxu: fix zero-length control requestJohan Hovold
commit 76f22c93b209c811bd489950f17f8839adb31901 upstream. The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Control transfers without a data stage are treated as OUT requests by the USB stack and should be using usb_sndctrlpipe(). Failing to do so will now trigger a warning. The driver uses a zero-length i2c-read request for type detection so update the control-request code to use usb_sndctrlpipe() in this case. Note that actually trying to read the i2c register in question does not work as the register might not exist (e.g. depending on the demodulator) as reported by Eero Lehtinen <debiangamer2@gmail.com>. Reported-by: syzbot+faf11bbadc5a372564da@syzkaller.appspotmail.com Reported-by: Eero Lehtinen <debiangamer2@gmail.com> Tested-by: Eero Lehtinen <debiangamer2@gmail.com> Fixes: d0f232e823af ("[media] rtl28xxu: add heuristic to detect chip type") Cc: stable@vger.kernel.org # 4.0 Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12staging: rtl8712: get rid of flush_scheduled_workPavel Skripkin
commit 9be550ee43919b070bcd77f9228bdbbbc073245b upstream. This patch is preparation for following patch for error handling refactoring. flush_scheduled_work() takes (wq_completion)events lock and it can lead to deadlock when r871xu_dev_remove() is called from workqueue. To avoid deadlock sutiation we can change flush_scheduled_work() call to flush_work() call for all possibly scheduled works in this driver, since next patch adds device_release_driver() in case of fw load failure. Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/6e028b4c457eeb7156c76c6ea3cdb3cb0207c7e1.1626895918.git.paskripkin@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12staging: rtl8723bs: Fix a resource leak in sd_int_dpcXiangyang Zhang
commit 990e4ad3ddcb72216caeddd6e62c5f45a21e8121 upstream. The "c2h_evt" variable is not freed when function call "c2h_evt_read_88xx" failed Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Xiangyang Zhang <xyz.sun.ok@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210628152239.5475-1-xyz.sun.ok@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12tpm_ftpm_tee: Free and unregister TEE shared memory during kexecTyler Hicks
commit dfb703ad2a8d366b829818a558337be779746575 upstream. dma-buf backed shared memory cannot be reliably freed and unregistered during a kexec operation even when tee_shm_free() is called on the shm from a .shutdown hook. The problem occurs because dma_buf_put() calls fput() which then uses task_work_add(), with the TWA_RESUME parameter, to queue tee_shm_release() to be called before the current task returns to user mode. However, the current task never returns to user mode before the kexec completes so the memory is never freed nor unregistered. Use tee_shm_alloc_kernel_buf() to avoid dma-buf backed shared memory allocation so that tee_shm_free() can directly call tee_shm_release(). This will ensure that the shm can be freed and unregistered during a kexec operation. Fixes: 09e574831b27 ("tpm/tpm_ftpm_tee: A driver for firmware TPM running inside TEE") Fixes: 1760eb689ed6 ("tpm/tpm_ftpm_tee: add shutdown call back") Cc: stable@vger.kernel.org Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12optee: Fix memory leak when failing to register shm pagesTyler Hicks
commit ec185dd3ab257dc2a60953fdf1b6622f524cc5b7 upstream. Free the previously allocated pages when we encounter an error condition while attempting to register the pages with the secure world. Fixes: a249dd200d03 ("tee: optee: Fix dynamic shm pool allocations") Fixes: 5a769f6ff439 ("optee: Fix multi page dynamic shm pool alloc") Cc: stable@vger.kernel.org Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12tee: add tee_shm_alloc_kernel_buf()Jens Wiklander
commit dc7019b7d0e188d4093b34bd0747ed0d668c63bf upstream. Adds a new function tee_shm_alloc_kernel_buf() to allocate shared memory from a kernel driver. This function can later be made more lightweight by unnecessary dma-buf export. Cc: stable@vger.kernel.org Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12optee: Clear stale cache entries during initializationTyler Hicks
commit b5c10dd04b7418793517e3286cde5c04759a86de upstream. The shm cache could contain invalid addresses if optee_disable_shm_cache() was not called from the .shutdown hook of the previous kernel before a kexec. These addresses could be unmapped or they could point to mapped but unintended locations in memory. Clear the shared memory cache, while being careful to not translate the addresses returned from OPTEE_SMC_DISABLE_SHM_CACHE, during driver initialization. Once all pre-cache shm objects are removed, proceed with enabling the cache so that we know that we can handle cached shm objects with confidence later in the .shutdown hook. Cc: stable@vger.kernel.org Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12tracing / histogram: Give calculation hist_fields a sizeSteven Rostedt (VMware)
commit 2c05caa7ba8803209769b9e4fe02c38d77ae88d0 upstream. When working on my user space applications, I found a bug in the synthetic event code where the automated synthetic event field was not matching the event field calculation it was attached to. Looking deeper into it, it was because the calculation hist_field was not given a size. The synthetic event fields are matched to their hist_fields either by having the field have an identical string type, or if that does not match, then the size and signed values are used to match the fields. The problem arose when I tried to match a calculation where the fields were "unsigned int". My tool created a synthetic event of type "u32". But it failed to match. The string was: diff=field1-field2:onmatch(event).trace(synth,$diff) Adding debugging into the kernel, I found that the size of "diff" was 0. And since it was given "unsigned int" as a type, the histogram fallback code used size and signed. The signed matched, but the size of u32 (4) did not match zero, and the event failed to be created. This can be worse if the field you want to match is not one of the acceptable fields for a synthetic event. As event fields can have any type that is supported in Linux, this can cause an issue. For example, if a type is an enum. Then there's no way to use that with any calculations. Have the calculation field simply take on the size of what it is calculating. Link: https://lkml.kernel.org/r/20210730171951.59c7743f@oasis.local.home Cc: Tom Zanussi <zanussi@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: 100719dcef447 ("tracing: Add simple expression support to hist triggers") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12scripts/tracing: fix the bug that can't parse raw_trace_funcHui Su
commit 1c0cec64a7cc545eb49f374a43e9f7190a14defa upstream. Since commit 77271ce4b2c0 ("tracing: Add irq, preempt-count and need resched info to default trace output"), the default trace output format has been changed to: <idle>-0 [009] d.h. 22420.068695: _raw_spin_lock_irqsave <-hrtimer_interrupt <idle>-0 [000] ..s. 22420.068695: _nohz_idle_balance <-run_rebalance_domains <idle>-0 [011] d.h. 22420.068695: account_process_tick <-update_process_times origin trace output format:(before v3.2.0) # tracer: nop # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | migration/0-6 [000] 50.025810: rcu_note_context_switch <-__schedule migration/0-6 [000] 50.025812: trace_rcu_utilization <-rcu_note_context_switch migration/0-6 [000] 50.025813: rcu_sched_qs <-rcu_note_context_switch migration/0-6 [000] 50.025815: rcu_preempt_qs <-rcu_note_context_switch migration/0-6 [000] 50.025817: trace_rcu_utilization <-rcu_note_context_switch migration/0-6 [000] 50.025818: debug_lockdep_rcu_enabled <-__schedule migration/0-6 [000] 50.025820: debug_lockdep_rcu_enabled <-__schedule The draw_functrace.py(introduced in v2.6.28) can't parse the new version format trace_func, So we need modify draw_functrace.py to adapt the new version trace output format. Link: https://lkml.kernel.org/r/20210611022107.608787-1-suhui@zeku.com Cc: stable@vger.kernel.org Fixes: 77271ce4b2c0 tracing: Add irq, preempt-count and need resched info to default trace output Signed-off-by: Hui Su <suhui@zeku.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12clk: fix leak on devm_clk_bulk_get_all() unwindBrian Norris
commit f828b0bcacef189edbd247e9f48864fc36bfbe33 upstream. clk_bulk_get_all() allocates an array of struct clk_bulk data for us (unlike clk_bulk_get()), so we need to free it. Let's use the clk_bulk_put_all() helper. kmemleak complains, on an RK3399 Gru/Kevin system: unreferenced object 0xffffff80045def00 (size 128): comm "swapper/0", pid 1, jiffies 4294667682 (age 86.394s) hex dump (first 32 bytes): 44 32 60 fe fe ff ff ff 00 00 00 00 00 00 00 00 D2`............. 48 32 60 fe fe ff ff ff 00 00 00 00 00 00 00 00 H2`............. backtrace: [<00000000742860d6>] __kmalloc+0x22c/0x39c [<00000000b0493f2c>] clk_bulk_get_all+0x64/0x188 [<00000000325f5900>] devm_clk_bulk_get_all+0x58/0xa8 [<00000000175b9bc5>] dwc3_probe+0x8ac/0xb5c [<000000009169e2f9>] platform_drv_probe+0x9c/0xbc [<000000005c51e2ee>] really_probe+0x13c/0x378 [<00000000c47b1f24>] driver_probe_device+0x84/0xc0 [<00000000f870fcfb>] __device_attach_driver+0x94/0xb0 [<000000004d1b92ae>] bus_for_each_drv+0x8c/0xd8 [<00000000481d60c3>] __device_attach+0xc4/0x150 [<00000000a163bd36>] device_initial_probe+0x1c/0x28 [<00000000accb6bad>] bus_probe_device+0x3c/0x9c [<000000001a199f89>] device_add+0x218/0x3cc [<000000001bd84952>] of_device_add+0x40/0x50 [<000000009c658c29>] of_platform_device_create_pdata+0xac/0x100 [<0000000021c69ba4>] of_platform_bus_create+0x190/0x224 Fixes: f08c2e2865f6 ("clk: add managed version of clk_bulk_get_all") Cc: Dong Aisheng <aisheng.dong@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20210731025950.2238582-1-briannorris@chromium.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12usb: otg-fsm: Fix hrtimer list corruptionDmitry Osipenko
commit bf88fef0b6f1488abeca594d377991171c00e52a upstream. The HNP work can be re-scheduled while it's still in-fly. This results in re-initialization of the busy work, resetting the hrtimer's list node of the work and crashing kernel with null dereference within kernel/timer once work's timer is expired. It's very easy to trigger this problem by re-plugging USB cable quickly. Initialize HNP work only once to fix this trouble. Unable to handle kernel NULL pointer dereference at virtual address 00000126) ... PC is at __run_timers.part.0+0x150/0x228 LR is at __next_timer_interrupt+0x51/0x9c ... (__run_timers.part.0) from [<c0187a2b>] (run_timer_softirq+0x2f/0x50) (run_timer_softirq) from [<c01013ad>] (__do_softirq+0xd5/0x2f0) (__do_softirq) from [<c012589b>] (irq_exit+0xab/0xb8) (irq_exit) from [<c0170341>] (handle_domain_irq+0x45/0x60) (handle_domain_irq) from [<c04c4a43>] (gic_handle_irq+0x6b/0x7c) (gic_handle_irq) from [<c0100b65>] (__irq_svc+0x65/0xac) Cc: stable@vger.kernel.org Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210717182134.30262-6-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12usb: gadget: f_hid: idle uses the highest byte for durationMaxim Devaev
commit fa20bada3f934e3b3e4af4c77e5b518cd5a282e5 upstream. SET_IDLE value must be shifted 8 bits to the right to get duration. This confirmed by USBCV test. Fixes: afcff6dc690e ("usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers") Cc: stable <stable@vger.kernel.org> Signed-off-by: Maxim Devaev <mdevaev@gmail.com> Link: https://lore.kernel.org/r/20210727185800.43796-1-mdevaev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12usb: gadget: f_hid: fixed NULL pointer dereferencePhil Elwell
commit 2867652e4766360adf14dfda3832455e04964f2a upstream. Disconnecting and reconnecting the USB cable can lead to crashes and a variety of kernel log spam. The problem was found and reproduced on the Raspberry Pi [1] and the original fix was created in Raspberry's own fork [2]. Link: https://github.com/raspberrypi/linux/issues/3870 [1] Link: https://github.com/raspberrypi/linux/commit/a6e47d5f4efbd2ea6a0b6565cd2f9b7bb217ded5 [2] Signed-off-by: Maxim Devaev <mdevaev@gmail.com> Signed-off-by: Phil Elwell <phil@raspberrypi.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210723155928.210019-1-mdevaev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlersMaxim Devaev
commit afcff6dc690e24d636a41fd4bee6057e7c70eebd upstream. The USB HID standard declares mandatory support for GET_IDLE and SET_IDLE requests for Boot Keyboard. Most hosts can handle their absence, but others like some old/strange UEFIs and BIOSes consider this a critical error and refuse to work with f_hid. This primitive implementation of saving and returning idle is sufficient to meet the requirements of the standard and these devices. Acked-by: Felipe Balbi <balbi@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Maxim Devaev <mdevaev@gmail.com> Link: https://lore.kernel.org/r/20210721180351.129450-1-mdevaev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12usb: cdns3: Fixed incorrect gadget statePawel Laszczak
commit aa35772f61752d4c636d46be51a4f7ca6c029ee6 upstream. For delayed status phase, the usb_gadget->state was set to USB_STATE_ADDRESS and it has never been updated to USB_STATE_CONFIGURED. Patch updates the gadget state to correct USB_STATE_CONFIGURED. As a result of this bug the controller was not able to enter to Test Mode while using MSC function. Cc: <stable@vger.kernel.org> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20210623070247.46151-1-pawell@gli-login.cadence.com Signed-off-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12ALSA: usb-audio: Add registration quirk for JBL Quantum 600Alexander Tsoy
commit 4b0556b96e1fe7723629bd40e3813a30cd632faf upstream. Apparently JBL Quantum 600 has multiple hardware revisions. Apply registration quirk to another device id as well. Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210727093326.1153366-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12ALSA: hda/realtek: add mic quirk for Acer SF314-42Alexander Monakov
commit 0d4867a185460397af56b9afe3e2243d3e610e37 upstream. The Acer Swift SF314-42 laptop is using Realtek ALC255 codec. Add a quirk so microphone in a headset connected via the right-hand side jack is usable. Signed-off-by: Alexander Monakov <amonakov@ispras.ru> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210721170141.24807-1-amonakov@ispras.ru Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12firmware_loader: fix use-after-free in firmware_fallback_sysfsAnirudh Rayabharam
commit 75d95e2e39b27f733f21e6668af1c9893a97de5e upstream. This use-after-free happens when a fw_priv object has been freed but hasn't been removed from the pending list (pending_fw_head). The next time fw_load_sysfs_fallback tries to insert into the list, it ends up accessing the pending_list member of the previously freed fw_priv. The root cause here is that all code paths that abort the fw load don't delete it from the pending list. For example: _request_firmware() -> fw_abort_batch_reqs() -> fw_state_aborted() To fix this, delete the fw_priv from the list in __fw_set_state() if the new state is DONE or ABORTED. This way, all aborts will remove the fw_priv from the list. Accordingly, remove calls to list_del_init that were being made before calling fw_state_(aborted|done). Also, in fw_load_sysfs_fallback, don't add the fw_priv to the pending list if it is already aborted. Instead, just jump out and return early. Fixes: bcfbd3523f3c ("firmware: fix a double abort case with fw_load_sysfs_fallback") Cc: stable <stable@vger.kernel.org> Reported-by: syzbot+de271708674e2093097b@syzkaller.appspotmail.com Tested-by: syzbot+de271708674e2093097b@syzkaller.appspotmail.com Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Link: https://lore.kernel.org/r/20210728085107.4141-3-mail@anirudhrb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12firmware_loader: use -ETIMEDOUT instead of -EAGAIN in fw_load_sysfs_fallbackAnirudh Rayabharam
commit 0d6434e10b5377a006f6dd995c8fc5e2d82acddc upstream. The only motivation for using -EAGAIN in commit 0542ad88fbdd81bb ("firmware loader: Fix _request_firmware_load() return val for fw load abort") was to distinguish the error from -ENOMEM, and so there is no real reason in keeping it. -EAGAIN is typically used to tell the userspace to try something again and in this case re-using the sysfs loading interface cannot be retried when a timeout happens, so the return value is also bogus. -ETIMEDOUT is received when the wait times out and returning that is much more telling of what the reason for the failure was. So, just propagate that instead of returning -EAGAIN. Suggested-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210728085107.4141-2-mail@anirudhrb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2David Bauer
commit 8da0e55c7988ef9f08a708c38e5c75ecd8862cf8 upstream. The Auto-M3 OP-COM v2 is a OBD diagnostic device using a FTD232 for the USB connection. Signed-off-by: David Bauer <mail@david-bauer.net> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12USB: serial: ch341: fix character loss at high transfer ratesWilly Tarreau
commit 3c18e9baee0ef97510dcda78c82285f52626764b upstream. The chip supports high transfer rates, but with the small default buffers (64 bytes read), some entire blocks are regularly lost. This typically happens at 1.5 Mbps (which is the default speed on Rockchip devices) when used as a console to access U-Boot where the output of the "help" command misses many lines and where "printenv" mangles the environment. The FTDI driver doesn't suffer at all from this. One difference is that it uses 512 bytes rx buffers and 256 bytes tx buffers. Adopting these values completely resolved the issue, even the output of "dmesg" is reliable. I preferred to leave the Tx value unchanged as it is not involved in this issue, while a change could increase the risk of triggering the same issue with other devices having too small buffers. I verified that it backports well (and works) at least to 5.4. It's of low importance enough to be dropped where it doesn't trivially apply anymore. Cc: stable@vger.kernel.org Signed-off-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20210724152739.18726-1-w@1wt.eu Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12USB: serial: option: add Telit FD980 composition 0x1056Daniele Palmas
commit 5648c073c33d33a0a19d0cb1194a4eb88efe2b71 upstream. Add the following Telit FD980 composition 0x1056: Cfg #1: mass storage Cfg #2: rndis, tty, adb, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20210803194711.3036-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 16:08:00 +0000