| Age | Commit message (Collapse) | Author |
|---|
|
commit 240246f6b913b0c23733cfd2def1d283f8cc9bbe upstream.
In compression write endio sequence, the range which the compressed_bio
writes is marked as uptodate if the last bio of the compressed (sub)bios
is completed successfully. There could be previous bio which may
have failed which is recorded in cb->errors.
Set the writeback range as uptodate only if cb->errors is zero, as opposed
to checking only the last bio's status.
Backporting notes: in all versions up to 4.4 the last argument is always
replaced by "!cb->errors".
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b2a616676839e2a6b02c8e40be7f886f882ed194 upstream.
When removing a writeable device in __btrfs_free_extra_devids, the rw
device count should be decremented.
This error was caught by Syzbot which reported a warning in
close_fs_devices:
WARNING: CPU: 1 PID: 9355 at fs/btrfs/volumes.c:1168 close_fs_devices+0x763/0x880 fs/btrfs/volumes.c:1168
Modules linked in:
CPU: 0 PID: 9355 Comm: syz-executor552 Not tainted 5.13.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:close_fs_devices+0x763/0x880 fs/btrfs/volumes.c:1168
RSP: 0018:ffffc9000333f2f0 EFLAGS: 00010293
RAX: ffffffff8365f5c3 RBX: 0000000000000001 RCX: ffff888029afd4c0
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffff88802846f508 R08: ffffffff8365f525 R09: ffffed100337d128
R10: ffffed100337d128 R11: 0000000000000000 R12: dffffc0000000000
R13: ffff888019be8868 R14: 1ffff1100337d10d R15: 1ffff1100337d10a
FS: 00007f6f53828700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000047c410 CR3: 00000000302a6000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
btrfs_close_devices+0xc9/0x450 fs/btrfs/volumes.c:1180
open_ctree+0x8e1/0x3968 fs/btrfs/disk-io.c:3693
btrfs_fill_super fs/btrfs/super.c:1382 [inline]
btrfs_mount_root+0xac5/0xc60 fs/btrfs/super.c:1749
legacy_get_tree+0xea/0x180 fs/fs_context.c:592
vfs_get_tree+0x86/0x270 fs/super.c:1498
fc_mount fs/namespace.c:993 [inline]
vfs_kern_mount+0xc9/0x160 fs/namespace.c:1023
btrfs_mount+0x3d3/0xb50 fs/btrfs/super.c:1809
legacy_get_tree+0xea/0x180 fs/fs_context.c:592
vfs_get_tree+0x86/0x270 fs/super.c:1498
do_new_mount fs/namespace.c:2905 [inline]
path_mount+0x196f/0x2be0 fs/namespace.c:3235
do_mount fs/namespace.c:3248 [inline]
__do_sys_mount fs/namespace.c:3456 [inline]
__se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433
do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
Because fs_devices->rw_devices was not 0 after
closing all devices. Here is the call trace that was observed:
btrfs_mount_root():
btrfs_scan_one_device():
device_list_add(); <---------------- device added
btrfs_open_devices():
open_fs_devices():
btrfs_open_one_device(); <-------- writable device opened,
rw device count ++
btrfs_fill_super():
open_ctree():
btrfs_free_extra_devids():
__btrfs_free_extra_devids(); <--- writable device removed,
rw device count not decremented
fail_tree_roots:
btrfs_close_devices():
close_fs_devices(); <------- rw device count off by 1
As a note, prior to commit cf89af146b7e ("btrfs: dev-replace: fail
mount if we don't have replace item with target device"), rw_devices
was decremented on removing a writable device in
__btrfs_free_extra_devids only if the BTRFS_DEV_STATE_REPLACE_TGT bit
was not set for the device. However, this check does not need to be
reinstated as it is now redundant and incorrect.
In __btrfs_free_extra_devids, we skip removing the device if it is the
target for replacement. This is done by checking whether device->devid
== BTRFS_DEV_REPLACE_DEVID. Since BTRFS_DEV_STATE_REPLACE_TGT is set
only on the device with devid BTRFS_DEV_REPLACE_DEVID, no devices
should have the BTRFS_DEV_STATE_REPLACE_TGT bit set after the check,
and so it's redundant to test for that bit.
Additionally, following commit 82372bc816d7 ("Btrfs: make
the logic of source device removing more clear"), rw_devices is
incremented whenever a writeable device is added to the alloc
list (including the target device in btrfs_dev_replace_finishing), so
all removals of writable devices from the alloc list should also be
accompanied by a decrement to rw_devices.
Reported-by: syzbot+a70e2ad0879f160b9217@syzkaller.appspotmail.com
Fixes: cf89af146b7e ("btrfs: dev-replace: fail mount if we don't have replace item with target device")
CC: stable@vger.kernel.org # 5.10+
Tested-by: syzbot+a70e2ad0879f160b9217@syzkaller.appspotmail.com
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
eviction
commit ecc64fab7d49c678e70bd4c35fe64d2ab3e3d212 upstream.
When checking if we need to log the new name of a renamed inode, we are
checking if the inode and its parent inode have been logged before, and if
not we don't log the new name. The check however is buggy, as it directly
compares the logged_trans field of the inodes versus the ID of the current
transaction. The problem is that logged_trans is a transient field, only
stored in memory and never persisted in the inode item, so if an inode
was logged before, evicted and reloaded, its logged_trans field is set to
a value of 0, meaning the check will return false and the new name of the
renamed inode is not logged. If the old parent directory was previously
fsynced and we deleted the logged directory entries corresponding to the
old name, we end up with a log that when replayed will delete the renamed
inode.
The following example triggers the problem:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ mkdir /mnt/A
$ mkdir /mnt/B
$ echo -n "hello world" > /mnt/A/foo
$ sync
# Add some new file to A and fsync directory A.
$ touch /mnt/A/bar
$ xfs_io -c "fsync" /mnt/A
# Now trigger inode eviction. We are only interested in triggering
# eviction for the inode of directory A.
$ echo 2 > /proc/sys/vm/drop_caches
# Move foo from directory A to directory B.
# This deletes the directory entries for foo in A from the log, and
# does not add the new name for foo in directory B to the log, because
# logged_trans of A is 0, which is less than the current transaction ID.
$ mv /mnt/A/foo /mnt/B/foo
# Now make an fsync to anything except A, B or any file inside them,
# like for example create a file at the root directory and fsync this
# new file. This syncs the log that contains all the changes done by
# previous rename operation.
$ touch /mnt/baz
$ xfs_io -c "fsync" /mnt/baz
<power fail>
# Mount the filesystem and replay the log.
$ mount /dev/sdc /mnt
# Check the filesystem content.
$ ls -1R /mnt
/mnt/:
A
B
baz
/mnt/A:
bar
/mnt/B:
$
# File foo is gone, it's neither in A/ nor in B/.
Fix this by using the inode_logged() helper at btrfs_log_new_name(), which
safely checks if an inode was logged before in the current transaction.
A test case for fstests will follow soon.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 728d392f8a799f037812d0f2b254fb3b5e115fcf upstream.
Commit 782b76d7abdf02b12c46ed6f1e9bf715569027f7 ("fs/ext2: Replace
kmap() with kmap_local_page()") replaced the kmap/kunmap calls in
ext2_get_page/ext2_put_page with kmap_local_page/kunmap_local for
efficiency reasons. As a necessary side change, the commit also
made ext2_get_page (and ext2_find_entry and ext2_dotdot) return
the mapping address along with the page itself, as it is required
for kunmap_local, and converted uses of page_address on such pages
to use the newly returned address instead. However, uses of
page_address on such pages were missed in ext2_check_page and
ext2_delete_entry, which triggers oopses if kmap_local_page happens
to return an address from high memory. Fix this now by converting
the remaining uses of page_address to use the right address, as
returned by kmap_local_page.
Link: https://lore.kernel.org/r/20210714185448.8707ac239e9f12b3a7f5b9f9@urjc.es
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Javier Pello <javier.pello@urjc.es>
Fixes: 782b76d7abdf ("fs/ext2: Replace kmap() with kmap_local_page()")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3a34b13a88caeb2800ab44a4918f230041b37dd9 upstream.
Since commit 1b6b26ae7053 ("pipe: fix and clarify pipe write wakeup
logic") we have sanitized the pipe write logic, and would only try to
wake up readers if they needed it.
In particular, if the pipe already had data in it before the write,
there was no point in trying to wake up a reader, since any existing
readers must have been aware of the pre-existing data already. Doing
extraneous wakeups will only cause potential thundering herd problems.
However, it turns out that some Android libraries have misused the EPOLL
interface, and expected "edge triggered" be to "any new write will
trigger it". Even if there was no edge in sight.
Quoting Sandeep Patil:
"The commit 1b6b26ae7053 ('pipe: fix and clarify pipe write wakeup
logic') changed pipe write logic to wakeup readers only if the pipe
was empty at the time of write. However, there are libraries that
relied upon the older behavior for notification scheme similar to
what's described in [1]
One such library 'realm-core'[2] is used by numerous Android
applications. The library uses a similar notification mechanism as GNU
Make but it never drains the pipe until it is full. When Android moved
to v5.10 kernel, all applications using this library stopped working.
The library has since been fixed[3] but it will be a while before all
applications incorporate the updated library"
Our regression rule for the kernel is that if applications break from
new behavior, it's a regression, even if it was because the application
did something patently wrong. Also note the original report [4] by
Michal Kerrisk about a test for this epoll behavior - but at that point
we didn't know of any actual broken use case.
So add the extraneous wakeup, to approximate the old behavior.
[ I say "approximate", because the exact old behavior was to do a wakeup
not for each write(), but for each pipe buffer chunk that was filled
in. The behavior introduced by this change is not that - this is just
"every write will cause a wakeup, whether necessary or not", which
seems to be sufficient for the broken library use. ]
It's worth noting that this adds the extraneous wakeup only for the
write side, while the read side still considers the "edge" to be purely
about reading enough from the pipe to allow further writes.
See commit f467a6a66419 ("pipe: fix and clarify pipe read wakeup logic")
for the pipe read case, which remains that "only wake up if the pipe was
full, and we read something from it".
Link: https://lore.kernel.org/lkml/CAHk-=wjeG0q1vgzu4iJhW5juPkTsjTYmiqiMUYAebWW+0bam6w@mail.gmail.com/ [1]
Link: https://github.com/realm/realm-core [2]
Link: https://github.com/realm/realm-core/issues/4666 [3]
Link: https://lore.kernel.org/lkml/CAKgNAkjMBGeAwF=2MKK758BhxvW58wYTgYKB2V-gY1PwXxrH+Q@mail.gmail.com/ [4]
Link: https://lore.kernel.org/lkml/20210729222635.2937453-1-sspatil@android.com/
Reported-by: Sandeep Patil <sspatil@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When backporting 0db282ba2c12 ("selftest: use mmap instead of
posix_memalign to allocate memory") to this stable branch, I forgot a {
breaking the build.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Link: https://lore.kernel.org/r/20210729135137.336097792@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2d85a1b31dde84038ea07ad825c3d8d3e71f4344 ]
skb_set_owner_w() should set sk not to old skb but to new nskb.
Fixes: 5796015fa968 ("ipv6: allocate enough headroom in ip6_finish_output2()")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: https://lore.kernel.org/r/70c0744f-89ae-1869-7e3e-4fa292158f4b@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 82a1c67554dff610d6be4e1982c425717b3c6a23 ]
Once the new schema interrupt-controller/arm,vic.yaml is added, we get
the below warnings:
arch/arm/boot/dts/versatile-ab.dt.yaml:
intc@10140000: $nodename:0: 'intc@10140000' does not match
'^interrupt-controller(@[0-9a-f,]+)*$'
arch/arm/boot/dts/versatile-ab.dt.yaml:
intc@10140000: 'clear-mask' does not match any of the regexes
Fix the node names for the interrupt controller to conform
to the standard node name interrupt-controller@.. Also drop invalid
clear-mask property.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210701132118.759454-1-sudeep.holla@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 49694d14ff68fa4b5f86019dbcfb44a8bd213e58 ]
The length variable is rather pointless given that it can be trivially
deduced from offset and size. Also the initial calculation can lead
to KASAN warnings.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Leizhen (ThunderTown) <thunder.leizhen@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3ac1d426510f97ace05093ae9f2f710d9cbe6215 ]
The length variable is rather pointless given that it can be trivially
deduced from offset and size. Also the initial calculation can lead
to KASAN warnings.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Leizhen (ThunderTown) <thunder.leizhen@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c9c9c6815f9004ee1ec87401ed0796853bd70f1b ]
Because the out of range assignment to bit fields
are compiler-dependant, the fields could have wrong
value.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bdb8742dc6f7c599c3d61959234fe4c23638727b ]
SCMI message headers carry a sequence number and such field is sized to
allow for MSG_TOKEN_MAX distinct numbers; moreover zero is not really an
acceptable maximum number of pending in-flight messages.
Fix accordingly the checks performed on the value exported by transports
in scmi_desc.max_msg
Link: https://lore.kernel.org/r/20210712141833.6628-3-cristian.marussi@arm.com
Reported-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
[sudeep.holla: updated the patch title and error message]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7a691f16ccad05d770f813d9c4b4337a30c6d63f ]
The scmi_linux_errmap buffer access index is supposed to depend on the
array size to prevent element out of bounds access. It uses SCMI_ERR_MAX
to check bounds but that can mismatch with the array size. It also
changes the success into -EIO though scmi_linux_errmap is never used in
case of success, it is expected to work for success case too.
It is slightly confusing code as the negative of the error code
is used as index to the buffer. Fix it by negating it at the start and
make it more readable.
Link: https://lore.kernel.org/r/20210707135028.1869642-1-sudeep.holla@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b3b2177a2d795e35dc11597b2609eb1e7e57e570 ]
Syzbot reports a possible recursive lock in [1].
This happens due to missing lock nesting information. From the logs, we
see that a call to hfs_fill_super is made to mount the hfs filesystem.
While searching for the root inode, the lock on the catalog btree is
grabbed. Then, when the parent of the root isn't found, a call to
__hfs_bnode_create is made to create the parent of the root. This
eventually leads to a call to hfs_ext_read_extent which grabs a lock on
the extents btree.
Since the order of locking is catalog btree -> extents btree, this lock
hierarchy does not lead to a deadlock.
To tell lockdep that this locking is safe, we add nesting notation to
distinguish between catalog btrees, extents btrees, and attributes
btrees (for HFS+). This has already been done in hfsplus.
Link: https://syzkaller.appspot.com/bug?id=f007ef1d7a31a469e3be7aeb0fde0769b18585db [1]
Link: https://lkml.kernel.org/r/20210701030756.58760-4-desmondcheongzx@gmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reported-by: syzbot+b718ec84a87b7e73ade4@syzkaller.appspotmail.com
Tested-by: syzbot+b718ec84a87b7e73ade4@syzkaller.appspotmail.com
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 54a5ead6f5e2b47131a7385d0c0af18e7b89cb02 ]
Pages that we read in hfs_bnode_read need to be kmapped into kernel
address space. However, currently only the 0th page is kmapped. If the
given offset + length exceeds this 0th page, then we have an invalid
memory access.
To fix this, we kmap relevant pages one by one and copy their relevant
portions of data.
An example of invalid memory access occurring without this fix can be seen
in the following crash report:
==================================================================
BUG: KASAN: use-after-free in memcpy include/linux/fortify-string.h:191 [inline]
BUG: KASAN: use-after-free in hfs_bnode_read+0xc4/0xe0 fs/hfs/bnode.c:26
Read of size 2 at addr ffff888125fdcffe by task syz-executor5/4634
CPU: 0 PID: 4634 Comm: syz-executor5 Not tainted 5.13.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x195/0x1f8 lib/dump_stack.c:120
print_address_description.constprop.0+0x1d/0x110 mm/kasan/report.c:233
__kasan_report mm/kasan/report.c:419 [inline]
kasan_report.cold+0x7b/0xd4 mm/kasan/report.c:436
check_region_inline mm/kasan/generic.c:180 [inline]
kasan_check_range+0x154/0x1b0 mm/kasan/generic.c:186
memcpy+0x24/0x60 mm/kasan/shadow.c:65
memcpy include/linux/fortify-string.h:191 [inline]
hfs_bnode_read+0xc4/0xe0 fs/hfs/bnode.c:26
hfs_bnode_read_u16 fs/hfs/bnode.c:34 [inline]
hfs_bnode_find+0x880/0xcc0 fs/hfs/bnode.c:365
hfs_brec_find+0x2d8/0x540 fs/hfs/bfind.c:126
hfs_brec_read+0x27/0x120 fs/hfs/bfind.c:165
hfs_cat_find_brec+0x19a/0x3b0 fs/hfs/catalog.c:194
hfs_fill_super+0xc13/0x1460 fs/hfs/super.c:419
mount_bdev+0x331/0x3f0 fs/super.c:1368
hfs_mount+0x35/0x40 fs/hfs/super.c:457
legacy_get_tree+0x10c/0x220 fs/fs_context.c:592
vfs_get_tree+0x93/0x300 fs/super.c:1498
do_new_mount fs/namespace.c:2905 [inline]
path_mount+0x13f5/0x20e0 fs/namespace.c:3235
do_mount fs/namespace.c:3248 [inline]
__do_sys_mount fs/namespace.c:3456 [inline]
__se_sys_mount fs/namespace.c:3433 [inline]
__x64_sys_mount+0x2b8/0x340 fs/namespace.c:3433
do_syscall_64+0x37/0xc0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x45e63a
Code: 48 c7 c2 bc ff ff ff f7 d8 64 89 02 b8 ff ff ff ff eb d2 e8 88 04 00 00 0f 1f 84 00 00 00 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f9404d410d8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000020000248 RCX: 000000000045e63a
RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007f9404d41120
RBP: 00007f9404d41120 R08: 00000000200002c0 R09: 0000000020000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 0000000000000003 R14: 00000000004ad5d8 R15: 0000000000000000
The buggy address belongs to the page:
page:00000000dadbcf3e refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x125fdc
flags: 0x2fffc0000000000(node=0|zone=2|lastcpupid=0x3fff)
raw: 02fffc0000000000 ffffea000497f748 ffffea000497f6c8 0000000000000000
raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888125fdce80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888125fdcf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff888125fdcf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888125fdd000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888125fdd080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
Link: https://lkml.kernel.org/r/20210701030756.58760-3-desmondcheongzx@gmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 16ee572eaf0d09daa4c8a755fdb71e40dbf8562d ]
Patch series "hfs: fix various errors", v2.
This series ultimately aims to address a lockdep warning in
hfs_find_init reported by Syzbot [1].
The work done for this led to the discovery of another bug, and the
Syzkaller repro test also reveals an invalid memory access error after
clearing the lockdep warning. Hence, this series is broken up into
three patches:
1. Add a missing call to hfs_find_exit for an error path in
hfs_fill_super
2. Fix memory mapping in hfs_bnode_read by fixing calls to kmap
3. Add lock nesting notation to tell lockdep that the observed locking
hierarchy is safe
This patch (of 3):
Before exiting hfs_fill_super, the struct hfs_find_data used in
hfs_find_init should be passed to hfs_find_exit to be cleaned up, and to
release the lock held on the btree.
The call to hfs_find_exit is missing from an error path. We add it back
in by consolidating calls to hfs_find_exit for error paths.
Link: https://syzkaller.appspot.com/bug?id=f007ef1d7a31a469e3be7aeb0fde0769b18585db [1]
Link: https://lkml.kernel.org/r/20210701030756.58760-1-desmondcheongzx@gmail.com
Link: https://lkml.kernel.org/r/20210701030756.58760-2-desmondcheongzx@gmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9e5c772954406829e928dbe59891d08938ead04b ]
When calling ttm_range_man_fini(), 'man' may be uninitialized, which may
cause a null pointer dereference bug.
Fix this by checking if it is a null pointer.
This log reveals it:
[ 7.902580 ] BUG: kernel NULL pointer dereference, address: 0000000000000058
[ 7.905721 ] RIP: 0010:ttm_range_man_fini+0x40/0x160
[ 7.911826 ] Call Trace:
[ 7.911826 ] radeon_ttm_fini+0x167/0x210
[ 7.911826 ] radeon_bo_fini+0x15/0x40
[ 7.913767 ] rs400_fini+0x55/0x80
[ 7.914358 ] radeon_device_fini+0x3c/0x140
[ 7.914358 ] radeon_driver_unload_kms+0x5c/0xe0
[ 7.914358 ] radeon_driver_load_kms+0x13a/0x200
[ 7.914358 ] ? radeon_driver_unload_kms+0xe0/0xe0
[ 7.914358 ] drm_dev_register+0x1db/0x290
[ 7.914358 ] radeon_pci_probe+0x16a/0x230
[ 7.914358 ] local_pci_probe+0x4a/0xb0
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1626274459-8148-1-git-send-email-zheyuma97@gmail.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e4b9852a0f4afe40604afb442e3af4452722050a ]
Below two paths could overlap each other if we power off a drive quickly
after powering it on. There are multiple races in nvme_setup_io_queues()
because of shutdown_lock missing and improper use of NVMEQ_ENABLED bit.
nvme_reset_work() nvme_remove()
nvme_setup_io_queues() nvme_dev_disable()
... ...
A1 clear NVMEQ_ENABLED bit for admin queue lock
retry: B1 nvme_suspend_io_queues()
A2 pci_free_irq() admin queue B2 nvme_suspend_queue() admin queue
A3 pci_free_irq_vectors() nvme_pci_disable()
A4 nvme_setup_irqs(); B3 pci_free_irq_vectors()
... unlock
A5 queue_request_irq() for admin queue
set NVMEQ_ENABLED bit
...
nvme_create_io_queues()
A6 result = queue_request_irq();
set NVMEQ_ENABLED bit
...
fail to allocate enough IO queues:
A7 nvme_suspend_io_queues()
goto retry
If B3 runs in between A1 and A2, it will crash if irqaction haven't
been freed by A2. B2 is supposed to free admin queue IRQ but it simply
can't fulfill the job as A1 has cleared NVMEQ_ENABLED bit.
Fix: combine A1 A2 so IRQ get freed as soon as the NVMEQ_ENABLED bit
gets cleared.
After solved #1, A2 could race with B3 if A2 is freeing IRQ while B3
is checking irqaction. A3 also could race with B2 if B2 is freeing
IRQ while A3 is checking irqaction.
Fix: A2 and A3 take lock for mutual exclusion.
A3 could race with B3 since they could run free_msi_irqs() in parallel.
Fix: A3 takes lock for mutual exclusion.
A4 could fail to allocate all needed IRQ vectors if A3 and A4 are
interrupted by B3.
Fix: A4 takes lock for mutual exclusion.
If A5/A6 happened after B2/B1, B3 will crash since irqaction is not NULL.
They are just allocated by A5/A6.
Fix: Lock queue_request_irq() and setting of NVMEQ_ENABLED bit.
A7 could get chance to pci_free_irq() for certain IO queue while B3 is
checking irqaction.
Fix: A7 takes lock.
nvme_dev->online_queues need to be protected by shutdown_lock. Since it
is not atomic, both paths could modify it using its own copy.
Co-developed-by: Yuanyuan Zhong <yzhong@purestorage.com>
Signed-off-by: Casey Chen <cachen@purestorage.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5796015fa968a3349027a27dcd04c71d95c53ba5 ]
When TEE target mirrors traffic to another interface, sk_buff may
not have enough headroom to be processed correctly.
ip_finish_output2() detect this situation for ipv4 and allocates
new skb with enogh headroom. However ipv6 lacks this logic in
ip_finish_output2 and it leads to skb_under_panic:
skbuff: skb_under_panic: text:ffffffffc0866ad4 len:96 put:24
head:ffff97be85e31800 data:ffff97be85e317f8 tail:0x58 end:0xc0 dev:gre0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:110!
invalid opcode: 0000 [#1] SMP PTI
CPU: 2 PID: 393 Comm: kworker/2:2 Tainted: G OE 5.13.0 #13
Hardware name: Virtuozzo KVM, BIOS 1.11.0-2.vz7.4 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:skb_panic+0x48/0x4a
Call Trace:
skb_push.cold.111+0x10/0x10
ipgre_header+0x24/0xf0 [ip_gre]
neigh_connected_output+0xae/0xf0
ip6_finish_output2+0x1a8/0x5a0
ip6_output+0x5c/0x110
nf_dup_ipv6+0x158/0x1000 [nf_dup_ipv6]
tee_tg6+0x2e/0x40 [xt_TEE]
ip6t_do_table+0x294/0x470 [ip6_tables]
nf_hook_slow+0x44/0xc0
nf_hook.constprop.34+0x72/0xe0
ndisc_send_skb+0x20d/0x2e0
ndisc_send_ns+0xd1/0x210
addrconf_dad_work+0x3c8/0x540
process_one_work+0x1d1/0x370
worker_thread+0x30/0x390
kthread+0x116/0x130
ret_from_fork+0x22/0x30
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a9ab9cce9367a2cc02a3c7eb57a004dc0b8f380d ]
Invoking trc_del_holdout() from within trc_wait_for_one_reader() is
only a performance optimization because the RCU Tasks Trace grace-period
kthread will eventually do this within check_all_holdout_tasks_trace().
But it is not a particularly important performance optimization because
it only applies to the grace-period kthread, of which there is but one.
This commit therefore removes this invocation of trc_del_holdout() in
favor of the one in check_all_holdout_tasks_trace() in the grace-period
kthread.
Reported-by: "Xu, Yanfei" <yanfei.xu@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1d10bf55d85d34eb73dd8263635f43fd72135d2d ]
As Yanfei pointed out, although invoking trc_del_holdout() is safe
from the viewpoint of the integrity of the holdout list itself,
the put_task_struct() invoked by trc_del_holdout() can result in
use-after-free errors due to later accesses to this task_struct structure
by the RCU Tasks Trace grace-period kthread.
This commit therefore removes this call to trc_del_holdout() from
trc_inspect_reader() in favor of the grace-period thread's existing call
to trc_del_holdout(), thus eliminating that particular class of
use-after-free errors.
Reported-by: "Xu, Yanfei" <yanfei.xu@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1d11fa231cabeae09a95cb3e4cf1d9dd34e00f08 ]
The doc draft-stewart-tsvwg-sctp-ipv4-00 that restricts 198 addresses
was never published. These addresses as private addresses should be
allowed to use in SCTP.
As Michael Tuexen suggested, this patch is to move 198 addresses from
unusable to private scope.
Reported-by: Sérgio <surkamp@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0dbffbb5335a1e3aa6855e4ee317e25e669dd302 ]
sk_ll_usec is read locklessly from sk_can_busy_loop()
while another thread can change its value in sock_setsockopt()
This is correct but needs annotations.
BUG: KCSAN: data-race in __skb_try_recv_datagram / sock_setsockopt
write to 0xffff88814eb5f904 of 4 bytes by task 14011 on cpu 0:
sock_setsockopt+0x1287/0x2090 net/core/sock.c:1175
__sys_setsockopt+0x14f/0x200 net/socket.c:2100
__do_sys_setsockopt net/socket.c:2115 [inline]
__se_sys_setsockopt net/socket.c:2112 [inline]
__x64_sys_setsockopt+0x62/0x70 net/socket.c:2112
do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff88814eb5f904 of 4 bytes by task 14001 on cpu 1:
sk_can_busy_loop include/net/busy_poll.h:41 [inline]
__skb_try_recv_datagram+0x14f/0x320 net/core/datagram.c:273
unix_dgram_recvmsg+0x14c/0x870 net/unix/af_unix.c:2101
unix_seqpacket_recvmsg+0x5a/0x70 net/unix/af_unix.c:2067
____sys_recvmsg+0x15d/0x310 include/linux/uio.h:244
___sys_recvmsg net/socket.c:2598 [inline]
do_recvmmsg+0x35c/0x9f0 net/socket.c:2692
__sys_recvmmsg net/socket.c:2771 [inline]
__do_sys_recvmmsg net/socket.c:2794 [inline]
__se_sys_recvmmsg net/socket.c:2787 [inline]
__x64_sys_recvmmsg+0xcf/0x150 net/socket.c:2787
do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x00000000 -> 0x00000101
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 14001 Comm: syz-executor.3 Not tainted 5.13.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 42ca63f980842918560b25f0244307fd83b4777c ]
I got kmemleak report when doing fuzz test:
BUG: memory leak
unreferenced object 0xffff88810c909b80 (size 64):
comm "syz", pid 957, jiffies 4295220394 (age 399.090s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 08 00 00 00 01 02 00 04 ................
backtrace:
[<00000000ca1f2e2e>] garp_request_join+0x285/0x3d0
[<00000000bf153351>] vlan_gvrp_request_join+0x15b/0x190
[<0000000024005e72>] vlan_dev_open+0x706/0x980
[<00000000dc20c4d4>] __dev_open+0x2bb/0x460
[<0000000066573004>] __dev_change_flags+0x501/0x650
[<0000000035b42f83>] rtnl_configure_link+0xee/0x280
[<00000000a5e69de0>] __rtnl_newlink+0xed5/0x1550
[<00000000a5258f4a>] rtnl_newlink+0x66/0x90
[<00000000506568ee>] rtnetlink_rcv_msg+0x439/0xbd0
[<00000000b7eaeae1>] netlink_rcv_skb+0x14d/0x420
[<00000000c373ce66>] netlink_unicast+0x550/0x750
[<00000000ec74ce74>] netlink_sendmsg+0x88b/0xda0
[<00000000381ff246>] sock_sendmsg+0xc9/0x120
[<000000008f6a2db3>] ____sys_sendmsg+0x6e8/0x820
[<000000008d9c1735>] ___sys_sendmsg+0x145/0x1c0
[<00000000aa39dd8b>] __sys_sendmsg+0xfe/0x1d0
Calling garp_request_leave() after garp_request_join(), the attr->state
is set to GARP_APPLICANT_VO, garp_attr_destroy() won't be called in last
transmit event in garp_uninit_applicant(), the attr of applicant will be
leaked. To fix this leak, iterate and free each attr of applicant before
rerturning from garp_uninit_applicant().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 996af62167d0e0ec69b938a3561e96f84ffff1aa ]
I got kmemleak report when doing fuzz test:
BUG: memory leak
unreferenced object 0xffff88810c239500 (size 64):
comm "syz-executor940", pid 882, jiffies 4294712870 (age 14.631s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 01 00 00 00 01 02 00 04 ................
backtrace:
[<00000000a323afa4>] slab_alloc_node mm/slub.c:2972 [inline]
[<00000000a323afa4>] slab_alloc mm/slub.c:2980 [inline]
[<00000000a323afa4>] __kmalloc+0x167/0x340 mm/slub.c:4130
[<000000005034ca11>] kmalloc include/linux/slab.h:595 [inline]
[<000000005034ca11>] mrp_attr_create net/802/mrp.c:276 [inline]
[<000000005034ca11>] mrp_request_join+0x265/0x550 net/802/mrp.c:530
[<00000000fcfd81f3>] vlan_mvrp_request_join+0x145/0x170 net/8021q/vlan_mvrp.c:40
[<000000009258546e>] vlan_dev_open+0x477/0x890 net/8021q/vlan_dev.c:292
[<0000000059acd82b>] __dev_open+0x281/0x410 net/core/dev.c:1609
[<000000004e6dc695>] __dev_change_flags+0x424/0x560 net/core/dev.c:8767
[<00000000471a09af>] rtnl_configure_link+0xd9/0x210 net/core/rtnetlink.c:3122
[<0000000037a4672b>] __rtnl_newlink+0xe08/0x13e0 net/core/rtnetlink.c:3448
[<000000008d5d0fda>] rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3488
[<000000004882fe39>] rtnetlink_rcv_msg+0x369/0xa10 net/core/rtnetlink.c:5552
[<00000000907e6c54>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504
[<00000000e7d7a8c4>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
[<00000000e7d7a8c4>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340
[<00000000e0645d50>] netlink_sendmsg+0x78e/0xc90 net/netlink/af_netlink.c:1929
[<00000000c24559b7>] sock_sendmsg_nosec net/socket.c:654 [inline]
[<00000000c24559b7>] sock_sendmsg+0x139/0x170 net/socket.c:674
[<00000000fc210bc2>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350
[<00000000be4577b5>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404
Calling mrp_request_leave() after mrp_request_join(), the attr->state
is set to MRP_APPLICANT_VO, mrp_attr_destroy() won't be called in last
TX event in mrp_uninit_applicant(), the attr of applicant will be leaked.
To fix this leak, iterate and free each attr of applicant before rerturning
from mrp_uninit_applicant().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 1e7107c5ef44431bc1ebbd4c353f1d7c22e5f2ec upstream.
Richard reported sporadic (roughly one in 10 or so) null dereferences and
other strange behaviour for a set of automated LTP tests. Things like:
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 1516 Comm: umount Not tainted 5.10.0-yocto-standard #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014
RIP: 0010:kernfs_sop_show_path+0x1b/0x60
...or these others:
RIP: 0010:do_mkdirat+0x6a/0xf0
RIP: 0010:d_alloc_parallel+0x98/0x510
RIP: 0010:do_readlinkat+0x86/0x120
There were other less common instances of some kind of a general scribble
but the common theme was mount and cgroup and a dubious dentry triggering
the NULL dereference. I was only able to reproduce it under qemu by
replicating Richard's setup as closely as possible - I never did get it
to happen on bare metal, even while keeping everything else the same.
In commit 71d883c37e8d ("cgroup_do_mount(): massage calling conventions")
we see this as a part of the overall change:
--------------
struct cgroup_subsys *ss;
- struct dentry *dentry;
[...]
- dentry = cgroup_do_mount(&cgroup_fs_type, fc->sb_flags, root,
- CGROUP_SUPER_MAGIC, ns);
[...]
- if (percpu_ref_is_dying(&root->cgrp.self.refcnt)) {
- struct super_block *sb = dentry->d_sb;
- dput(dentry);
+ ret = cgroup_do_mount(fc, CGROUP_SUPER_MAGIC, ns);
+ if (!ret && percpu_ref_is_dying(&root->cgrp.self.refcnt)) {
+ struct super_block *sb = fc->root->d_sb;
+ dput(fc->root);
deactivate_locked_super(sb);
msleep(10);
return restart_syscall();
}
--------------
In changing from the local "*dentry" variable to using fc->root, we now
export/leave that dentry pointer in the file context after doing the dput()
in the unlikely "is_dying" case. With LTP doing a crazy amount of back to
back mount/unmount [testcases/bin/cgroup_regression_5_1.sh] the unlikely
becomes slightly likely and then bad things happen.
A fix would be to not leave the stale reference in fc->root as follows:
--------------
dput(fc->root);
+ fc->root = NULL;
deactivate_locked_super(sb);
--------------
...but then we are just open-coding a duplicate of fc_drop_locked() so we
simply use that instead.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: stable@vger.kernel.org # v5.1+
Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes: 71d883c37e8d ("cgroup_do_mount(): massage calling conventions")
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b42b0bddcbc87b4c66f6497f66fc72d52b712aa7 upstream.
I got a UAF report when doing fuzz test:
[ 152.880091][ T8030] ==================================================================
[ 152.881240][ T8030] BUG: KASAN: use-after-free in pwq_unbound_release_workfn+0x50/0x190
[ 152.882442][ T8030] Read of size 4 at addr ffff88810d31bd00 by task kworker/3:2/8030
[ 152.883578][ T8030]
[ 152.883932][ T8030] CPU: 3 PID: 8030 Comm: kworker/3:2 Not tainted 5.13.0+ #249
[ 152.885014][ T8030] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 152.886442][ T8030] Workqueue: events pwq_unbound_release_workfn
[ 152.887358][ T8030] Call Trace:
[ 152.887837][ T8030] dump_stack_lvl+0x75/0x9b
[ 152.888525][ T8030] ? pwq_unbound_release_workfn+0x50/0x190
[ 152.889371][ T8030] print_address_description.constprop.10+0x48/0x70
[ 152.890326][ T8030] ? pwq_unbound_release_workfn+0x50/0x190
[ 152.891163][ T8030] ? pwq_unbound_release_workfn+0x50/0x190
[ 152.891999][ T8030] kasan_report.cold.15+0x82/0xdb
[ 152.892740][ T8030] ? pwq_unbound_release_workfn+0x50/0x190
[ 152.893594][ T8030] __asan_load4+0x69/0x90
[ 152.894243][ T8030] pwq_unbound_release_workfn+0x50/0x190
[ 152.895057][ T8030] process_one_work+0x47b/0x890
[ 152.895778][ T8030] worker_thread+0x5c/0x790
[ 152.896439][ T8030] ? process_one_work+0x890/0x890
[ 152.897163][ T8030] kthread+0x223/0x250
[ 152.897747][ T8030] ? set_kthread_struct+0xb0/0xb0
[ 152.898471][ T8030] ret_from_fork+0x1f/0x30
[ 152.899114][ T8030]
[ 152.899446][ T8030] Allocated by task 8884:
[ 152.900084][ T8030] kasan_save_stack+0x21/0x50
[ 152.900769][ T8030] __kasan_kmalloc+0x88/0xb0
[ 152.901416][ T8030] __kmalloc+0x29c/0x460
[ 152.902014][ T8030] alloc_workqueue+0x111/0x8e0
[ 152.902690][ T8030] __btrfs_alloc_workqueue+0x11e/0x2a0
[ 152.903459][ T8030] btrfs_alloc_workqueue+0x6d/0x1d0
[ 152.904198][ T8030] scrub_workers_get+0x1e8/0x490
[ 152.904929][ T8030] btrfs_scrub_dev+0x1b9/0x9c0
[ 152.905599][ T8030] btrfs_ioctl+0x122c/0x4e50
[ 152.906247][ T8030] __x64_sys_ioctl+0x137/0x190
[ 152.906916][ T8030] do_syscall_64+0x34/0xb0
[ 152.907535][ T8030] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 152.908365][ T8030]
[ 152.908688][ T8030] Freed by task 8884:
[ 152.909243][ T8030] kasan_save_stack+0x21/0x50
[ 152.909893][ T8030] kasan_set_track+0x20/0x30
[ 152.910541][ T8030] kasan_set_free_info+0x24/0x40
[ 152.911265][ T8030] __kasan_slab_free+0xf7/0x140
[ 152.911964][ T8030] kfree+0x9e/0x3d0
[ 152.912501][ T8030] alloc_workqueue+0x7d7/0x8e0
[ 152.913182][ T8030] __btrfs_alloc_workqueue+0x11e/0x2a0
[ 152.913949][ T8030] btrfs_alloc_workqueue+0x6d/0x1d0
[ 152.914703][ T8030] scrub_workers_get+0x1e8/0x490
[ 152.915402][ T8030] btrfs_scrub_dev+0x1b9/0x9c0
[ 152.916077][ T8030] btrfs_ioctl+0x122c/0x4e50
[ 152.916729][ T8030] __x64_sys_ioctl+0x137/0x190
[ 152.917414][ T8030] do_syscall_64+0x34/0xb0
[ 152.918034][ T8030] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 152.918872][ T8030]
[ 152.919203][ T8030] The buggy address belongs to the object at ffff88810d31bc00
[ 152.919203][ T8030] which belongs to the cache kmalloc-512 of size 512
[ 152.921155][ T8030] The buggy address is located 256 bytes inside of
[ 152.921155][ T8030] 512-byte region [ffff88810d31bc00, ffff88810d31be00)
[ 152.922993][ T8030] The buggy address belongs to the page:
[ 152.923800][ T8030] page:ffffea000434c600 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10d318
[ 152.925249][ T8030] head:ffffea000434c600 order:2 compound_mapcount:0 compound_pincount:0
[ 152.926399][ T8030] flags: 0x57ff00000010200(slab|head|node=1|zone=2|lastcpupid=0x7ff)
[ 152.927515][ T8030] raw: 057ff00000010200 dead000000000100 dead000000000122 ffff888009c42c80
[ 152.928716][ T8030] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
[ 152.929890][ T8030] page dumped because: kasan: bad access detected
[ 152.930759][ T8030]
[ 152.931076][ T8030] Memory state around the buggy address:
[ 152.931851][ T8030] ffff88810d31bc00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 152.932967][ T8030] ffff88810d31bc80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 152.934068][ T8030] >ffff88810d31bd00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 152.935189][ T8030] ^
[ 152.935763][ T8030] ffff88810d31bd80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 152.936847][ T8030] ffff88810d31be00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 152.937940][ T8030] ==================================================================
If apply_wqattrs_prepare() fails in alloc_workqueue(), it will call put_pwq()
which invoke a work queue to call pwq_unbound_release_workfn() and use the 'wq'.
The 'wq' allocated in alloc_workqueue() will be freed in error path when
apply_wqattrs_prepare() fails. So it will lead a UAF.
CPU0 CPU1
alloc_workqueue()
alloc_and_link_pwqs()
apply_wqattrs_prepare() fails
apply_wqattrs_cleanup()
schedule_work(&pwq->unbound_release_work)
kfree(wq)
worker_thread()
pwq_unbound_release_workfn() <- trigger uaf here
If apply_wqattrs_prepare() fails, the new pwq are not linked, it doesn't
hold any reference to the 'wq', 'wq' is invalid to access in the worker,
so add check pwq if linked to fix this.
Fixes: 2d5f0764b526 ("workqueue: split apply_workqueue_attrs() into 3 stages")
Cc: stable@vger.kernel.org # v4.2+
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Tested-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cbcf01128d0a92e131bd09f1688fe032480b65ca upstream.
unix_gc() assumes that candidate sockets can never gain an external
reference (i.e. be installed into an fd) while the unix_gc_lock is
held. Except for MSG_PEEK this is guaranteed by modifying inflight
count under the unix_gc_lock.
MSG_PEEK does not touch any variable protected by unix_gc_lock (file
count is not), yet it needs to be serialized with garbage collection.
Do this by locking/unlocking unix_gc_lock:
1) increment file count
2) lock/unlock barrier to make sure incremented file count is visible
to garbage collection
3) install file into fd
This is a lock barrier (unlike smp_mb()) that ensures that garbage
collection is run completely before or completely after the barrier.
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Link: https://lore.kernel.org/r/20210726153846.245305071@linuxfoundation.org
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210726165238.919699741@linuxfoundation.org
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9615fe36b31d926f1c5107013b772dc226a6a7ca upstream.
We will fail to build with CONFIG_SKB_EXTENSIONS disabled after
8550ff8d8c75 ("skbuff: Release nfct refcount on napi stolen or re-used
skbs") since there is an unconditionally use of skb_ext_find() without
an appropriate stub. Simply build the code conditionally and properly
guard against both COFNIG_SKB_EXTENSIONS as well as
CONFIG_NET_TC_SKB_EXT being disabled.
Fixes: Fixes: 8550ff8d8c75 ("skbuff: Release nfct refcount on napi stolen or re-used skbs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 788bc000d4c2f25232db19ab3a0add0ba4e27671 ]
Commit 99ba0ea616aa ("sfc: adjust efx->xdp_tx_queue_count with the real
number of initialized queues") intended to fix a problem caused by a
round up when calculating the number of XDP channels and queues.
However, this was not the real problem. The real problem was that the
number of XDP TX queues had been reduced to half in
commit e26ca4b53582 ("sfc: reduce the number of requested xdp ev queues"),
but the variable xdp_tx_queue_count had remained the same.
Once the correct number of XDP TX queues is created again in the
previous patch of this series, this also can be reverted since the error
doesn't actually exist.
Only in the case that there is a bug in the code we can have different
values in xdp_queue_number and efx->xdp_tx_queue_count. Because of this,
and per Edward Cree's suggestion, I add instead a WARN_ON to catch if it
happens again in the future.
Note that the number of allocated queues can be higher than the number
of used ones due to the round up, as explained in the existing comment
in the code. That's why we also have to stop increasing xdp_queue_number
beyond efx->xdp_tx_queue_count.
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0e85ee897858b1c7a5de53f496d016899d9639c5 upstream.
Fix below division by zero warning:
- The reason for dividing by zero is because the dummy bus width is zero,
but if the dummy n bytes is zero, it indicates that there is no data transfer,
so we can just return zero without doing any calculations.
[ 0.795337] Division by zero in kernel.
:
[ 0.834051] [<807fd40c>] (__div0) from [<804e1acc>] (Ldiv0+0x8/0x10)
[ 0.839097] [<805f0710>] (cqspi_exec_mem_op) from [<805edb4c>] (spi_mem_exec_op+0x3b0/0x3f8)
Fixes: 7512eaf54190 ("spi: cadence-quadspi: Fix dummy cycle calculation when buswidth > 1")
Signed-off-by: Yoshitaka Ikeda <ikeda@nskint.co.jp>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/92eea403-9b21-2488-9cc1-664bee760c5e@nskint.co.jp
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c90b4503ccf42d9d367e843c223df44aa550e82a upstream.
d3_entered flag is used to mark for vgpu_reset a previous power
transition from D3->D0, typically for VM resume from S3, so that gvt
could skip PPGTT invalidation in current vgpu_reset during resuming.
In case S0ix exit, although there is D3->D0, guest driver continue to
use vgpu as normal, with d3_entered set, until next shutdown/reboot or
power transition.
If a reboot follows a S0ix exit, device power state transite as:
D0->D3->D0->D0(reboot), while system power state transites as:
S0->S0 (reboot). There is no vgpu_reset until D0(reboot), thus
d3_entered won't be cleared, the vgpu_reset will skip PPGTT invalidation
however those PPGTT entries are no longer valid. Err appears like:
gvt: vgpu 2: vfio_pin_pages failed for gfn 0xxxxx, ret -22
gvt: vgpu 2: fail: spt xxxx guest entry 0xxxxx type 2
gvt: vgpu 2: fail: shadow page xxxx guest entry 0xxxxx type 2.
Give gvt a chance to clear d3_entered on elsp cmd submission so that the
states before & after S0ix enter/exit are consistent.
Fixes: ba25d977571e ("drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210707004531.4873-1-colin.xu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 02e6246f5364d5260a6ea6f92ab6f409058b162f upstream.
ASan reports a memory leak when running:
# perf test "83: Zstd perf.data compression/decompression"
which happens inside 'perf inject'.
The bug is caused by inject.output never being closed.
This patch adds the missing perf_data__close().
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: 6ef81c55a2b6584c ("perf session: Return error code for perf_session__new() function on failure")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/c06f682afa964687367cf6e92a64ceb49aec76a5.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e6f85cbeb23bd74b8966cf1f15bf7d01399ff625 upstream.
We suppress KCOV for entry.o rather than entry-common.o. As entry.o is
built from entry.S, this is pointless, and permits instrumentation of
entry-common.o, which is built from entry-common.c.
Fix the Makefile to suppress KCOV for entry-common.o, as we had intended
to begin with. I've verified with objdump that this is working as
expected.
Fixes: bf6fa2c0dda7 ("arm64: entry: don't instrument entry code with KCOV")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210715123049.9990-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5e60f363b38fd40e4d8838b5d6f4d4ecee92c777 upstream.
Documentation was not changed when renaming the script in commit
80e715a06c2d ("initramfs: rename gen_initramfs_list.sh to
gen_initramfs.sh"). Fixing this.
Basically does:
$ sed -i -e s/gen_initramfs_list.sh/gen_initramfs.sh/g $(git grep -l gen_initramfs_list.sh)
Fixes: 80e715a06c2d ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh")
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ab37a7a890c1176144a4c66ff3d51ef2c20ed486 upstream.
The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has
been a "regression source" a lot of times. The last case is breakage of
USB mass storage boot has been commit e590474768f1 ("driver core: Set
fw_devlink=on by default") for multi_v7_defconfig. As long as
NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing
endlessly and prevent booting from USB mass storage device. So make
the driver built-in as in bcm2835_defconfig and arm64/defconfig.
Fixes: e590474768f1 ("driver core: Set fw_devlink=on by default")
Reported-by: Ojaswin Mujoo <ojaswin98@gmail.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1625915095-23077-1-git-send-email-stefan.wahren@i2se.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8550ff8d8c75416e984d9c4b082845e57e560984 upstream.
When multiple SKBs are merged to a new skb under napi GRO,
or SKB is re-used by napi, if nfct was set for them in the
driver, it will not be released while freeing their stolen
head state or on re-use.
Release nfct on napi's stolen or re-used SKBs, and
in gro_list_prepare, check conntrack metadata diff.
Fixes: 5c6b94604744 ("net/mlx5e: CT: Handle misses after executing CT action")
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c4512c63b1193c73b3f09c598a6d0a7f88da1dd8 upstream.
Dan Carpenter reported an issue introduced in
commit fde56eea01f9 ("mptcp: refine mptcp_cleanup_rbuf") where a new
boolean (ack_pending) is masked with 0x9.
This is not the intention to ignore values by using a boolean. This
variable should not have a 'bool' type: we should keep the 'u8' to allow
this comparison.
Fixes: fde56eea01f9 ("mptcp: refine mptcp_cleanup_rbuf")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5b69874f74cc5707edd95fcdaa757c507ac8af0f upstream.
The commit 9a5605505d9c (" bonding: Add struct bond_ipesc to manage SA") is causing
following build error when XFRM is not selected in kernel config.
lld: error: undefined symbol: xfrm_dev_state_flush
>>> referenced by bond_main.c:3453 (drivers/net/bonding/bond_main.c:3453)
>>> net/bonding/bond_main.o:(bond_netdev_event) in archive drivers/built-in.a
Fixes: 9a5605505d9c (" bonding: Add struct bond_ipesc to manage SA")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
CC: Taehee Yoo <ap420073@gmail.com>
CC: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0ccfd1ba84a4503b509250941af149e9ebd605ca upstream.
Revert to change to a better code.
This reverts commit 55cef88bbf12f3bfbe5c2379a8868a034707e755.
Signed-off-by: Yoshitaka Ikeda <ikeda@nskint.co.jp>
Link: https://lore.kernel.org/r/bd30bdb4-07c4-f713-5648-01c898d51f1b@nskint.co.jp
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3e94b5965e624f7e6d8dd18eb8f3bf2bb99ba30d upstream.
Update GFX golden setting for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4fff6fbca12524358a32e56f125ae738141f62b4 upstream.
This patch is to update the golden setting for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cfe4e8f00f8f19ba305800f64962d1949ab5d4ca upstream.
Update gc_10_3_4 golden setting.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3abab27c322e0f2acf981595aa8040c9164dc9fb upstream.
drm: Return -ENOTTY for non-drm ioctls
Return -ENOTTY from drm_ioctl() when userspace passes in a cmd number
which doesn't relate to the drm subsystem.
Glibc uses the TCGETS ioctl to implement isatty(), and without this
change isatty() returns it incorrectly returns true for drm devices.
To test run this command:
$ if [ -t 0 ]; then echo is a tty; fi < /dev/dri/card0
which shows "is a tty" without this patch.
This may also modify memory which the userspace application is not
expecting.
Signed-off-by: Charles Baylis <cb-kernel@fishzet.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YPG3IBlzaMhfPqCr@stando.fishzet.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
consumer
commit e64daad660a0c9ace3acdc57099fffe5ed83f977 upstream.
sysfs_remove_link() causes a warning if the parent directory does not
exist. That can happen if the device link consumer has not been registered.
So do not attempt sysfs_remove_link() in that case.
Fixes: 287905e68dd29 ("driver core: Expose device link details in sysfs")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # 5.9+
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20210716114408.17320-2-adrian.hunter@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c453db6cd96418c79702eaf38259002755ab23ff upstream.
Commit 1be7107fbe18 ("mm: larger stack guard gap, between vmas") fixed
up all architectures to deal with the stack guard gap. But when nds32
was added to the tree, it forgot to do the same thing.
Resolve this by properly fixing up the nsd32's version of
arch_get_unmapped_area()
Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Qiang Liu <cyruscyliu@gmail.com>
Cc: stable <stable@vger.kernel.org>
Reported-by: iLifetruth <yixiaonn@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Link: https://lore.kernel.org/r/20210629104024.2293615-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c36748ac545421d94a5091c754414c0f3664bf10 upstream.
We need to append device id even if eeprom have a label property set as some
platform can have multiple eeproms with same label and we can not register
each of those with same label. Failing to register those eeproms trigger
cascade failures on such platform (system is no longer working).
This fix regression on such platform introduced with 4e302c3b568e
Reported-by: Alexander Fomichev <fomichev.ru@gmail.com>
Fixes: 4e302c3b568e ("misc: eeprom: at24: fix NVMEM name with custom AT24 device name")
Cc: stable@vger.kernel.org
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8798d070d416d18a75770fc19787e96705073f43 upstream.
Skipping the "lock has been released" notification if the lock owner
is not what we expect based on owner_cid can lead to I/O hangs.
One example is our own notifications: because owner_cid is cleared
in rbd_unlock(), when we get our own notification it is processed as
unexpected/duplicate and maybe_kick_acquire() isn't called. If a peer
that requested the lock then doesn't go through with acquiring it,
I/O requests that came in while the lock was being quiesced would
be stalled until another I/O request is submitted and kicks acquire
from rbd_img_exclusive_lock().
This makes the comment in rbd_release_lock() actually true: prior to
this change the canceled work was being requeued in response to the
"lock has been acquired" notification from rbd_handle_acquired_lock().
Cc: stable@vger.kernel.org # 5.3+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Robin Geuze <robin.geuze@nl.team.blue>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
