| Age | Commit message (Collapse) | Author |
|---|
|
commit 1ff15a710a862db1101b97810af14aedc835a86a upstream.
Make sure RTA_GATEWAY for IPv6 multipath route has enough bytes to hold
an IPv6 address.
Fixes: 6b9ea5a64ed5 ("ipv6: fix multipath route replace error recovery")
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4619bcf91399f00a40885100fb61d594d8454033 upstream.
Commit referenced in the Fixes tag used nla_memcpy for RTA_GATEWAY as
does the current nla_get_in6_addr. nla_memcpy protects against accessing
memory greater than what is in the attribute, but there is no check
requiring the attribute to have an IPv6 address. Add it.
Fixes: 51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)")
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 664b9c4b7392ce723b013201843264bf95481ce5 upstream.
Make sure RTA_FLOW is at least 4B before using.
Fixes: 4e902c57417c ("[IPv4]: FIB configuration using struct fib_config")
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7a3429bace0e08d94c39245631ea6bc109dafa49 upstream.
syzbot reported uninit-value:
============================================================
BUG: KMSAN: uninit-value in fib_get_nhs+0xac4/0x1f80
net/ipv4/fib_semantics.c:708
fib_get_nhs+0xac4/0x1f80 net/ipv4/fib_semantics.c:708
fib_create_info+0x2411/0x4870 net/ipv4/fib_semantics.c:1453
fib_table_insert+0x45c/0x3a10 net/ipv4/fib_trie.c:1224
inet_rtm_newroute+0x289/0x420 net/ipv4/fib_frontend.c:886
Add helper to validate RTA_GATEWAY length before using the attribute.
Fixes: 4e902c57417c ("[IPv4]: FIB configuration using struct fib_config")
Reported-by: syzbot+d4b9a2851cc3ce998741@syzkaller.appspotmail.com
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0daf5cb217a9ca8ae91b8f966ddae322699fb71d upstream.
There's another compilation fail (first here [1]) reported by kernel
test robot for W=1 clang build:
>> samples/ftrace/ftrace-direct-multi-modify.c:7:6: warning: no previous
prototype for function 'my_direct_func1' [-Wmissing-prototypes]
void my_direct_func1(unsigned long ip)
Direct functions in ftrace direct sample modules need to have prototypes
defined. They are already global in order to be visible for the inline
assembly, so there's no problem.
The kernel test robot reported just error for ftrace-direct-multi-modify,
but I got same errors also for the rest of the modules touched by this patch.
[1] 67d4f6e3bf5d ftrace/samples: Add missing prototype for my_direct_func
Link: https://lkml.kernel.org/r/20211219135317.212430-1-jolsa@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Fixes: e1067a07cfbc ("ftrace/samples: Add module to test multi direct modify interface")
Fixes: ae0cc3b7e7f5 ("ftrace/samples: Add a sample module that implements modify_ftrace_direct()")
Fixes: 156473a0ff4f ("ftrace: Add another example of register_ftrace_direct() use case")
Fixes: b06457c83af6 ("ftrace: Add sample module that uses register_ftrace_direct()")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e738451d78b2f8a9635d66c6a87f304b4d965f7a upstream.
There was a wrong queues representation in sysfs during
driver's reinitialization in case of online cpus number is
less than combined queues. It was caused by stopped
NetworkManager, which is responsible for calling vsi_open
function during driver's initialization.
In specific situation (ex. 12 cpus online) there were 16 queues
in /sys/class/net/<iface>/queues. In case of modifying queues with
value higher, than number of online cpus, then it caused write
errors and other errors.
Add updating of sysfs's queues representation during driver
initialization.
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 40feded8a247f95957a0de9abd100085fb320a2f upstream.
When loading the i40e driver, it prints a message like: 'The driver for the
device detected a newer version of the NVM image v1.x than expected v1.y.
Please install the most recent version of the network driver.' This is
misleading as the driver is working as expected.
Fix that by removing the second part of message and changing it from
dev_info to dev_dbg.
Fixes: 4fb29bddb57f ("i40e: The driver now prints the API version in error message")
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3116f59c12bd24c513194cd3acb3ec1f7d468954 upstream.
Using ifconfig command to delete the ipv6 address will cause
the i40e network card driver to delete its internal mac_filter and
i40e_service_task kernel thread will concurrently access the mac_filter.
These two processes are not protected by lock
so causing the following use-after-free problems.
print_address_description+0x70/0x360
? vprintk_func+0x5e/0xf0
kasan_report+0x1b2/0x330
i40e_sync_vsi_filters+0x4f0/0x1850 [i40e]
i40e_sync_filters_subtask+0xe3/0x130 [i40e]
i40e_service_task+0x195/0x24c0 [i40e]
process_one_work+0x3f5/0x7d0
worker_thread+0x61/0x6c0
? process_one_work+0x7d0/0x7d0
kthread+0x1c3/0x1f0
? kthread_park+0xc0/0xc0
ret_from_fork+0x35/0x40
Allocated by task 2279810:
kasan_kmalloc+0xa0/0xd0
kmem_cache_alloc_trace+0xf3/0x1e0
i40e_add_filter+0x127/0x2b0 [i40e]
i40e_add_mac_filter+0x156/0x190 [i40e]
i40e_addr_sync+0x2d/0x40 [i40e]
__hw_addr_sync_dev+0x154/0x210
i40e_set_rx_mode+0x6d/0xf0 [i40e]
__dev_set_rx_mode+0xfb/0x1f0
__dev_mc_add+0x6c/0x90
igmp6_group_added+0x214/0x230
__ipv6_dev_mc_inc+0x338/0x4f0
addrconf_join_solict.part.7+0xa2/0xd0
addrconf_dad_work+0x500/0x980
process_one_work+0x3f5/0x7d0
worker_thread+0x61/0x6c0
kthread+0x1c3/0x1f0
ret_from_fork+0x35/0x40
Freed by task 2547073:
__kasan_slab_free+0x130/0x180
kfree+0x90/0x1b0
__i40e_del_filter+0xa3/0xf0 [i40e]
i40e_del_mac_filter+0xf3/0x130 [i40e]
i40e_addr_unsync+0x85/0xa0 [i40e]
__hw_addr_sync_dev+0x9d/0x210
i40e_set_rx_mode+0x6d/0xf0 [i40e]
__dev_set_rx_mode+0xfb/0x1f0
__dev_mc_del+0x69/0x80
igmp6_group_dropped+0x279/0x510
__ipv6_dev_mc_dec+0x174/0x220
addrconf_leave_solict.part.8+0xa2/0xd0
__ipv6_ifa_notify+0x4cd/0x570
ipv6_ifa_notify+0x58/0x80
ipv6_del_addr+0x259/0x4a0
inet6_addr_del+0x188/0x260
addrconf_del_ifaddr+0xcc/0x130
inet6_ioctl+0x152/0x190
sock_do_ioctl+0xd8/0x2b0
sock_ioctl+0x2e5/0x4c0
do_vfs_ioctl+0x14e/0xa80
ksys_ioctl+0x7c/0xa0
__x64_sys_ioctl+0x42/0x50
do_syscall_64+0x98/0x2c0
entry_SYSCALL_64_after_hwframe+0x65/0xca
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Di Zhu <zhudi2@huawei.com>
Signed-off-by: Rui Zhang <zhangrui182@huawei.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1d5a474240407c38ca8c7484a656ee39f585399c upstream.
The RX page_ring is an optional feature that improves
performance. When allocation fails the driver can still
function, but possibly with a lower bandwidth.
Guard against dereferencing a NULL page_ring.
Fixes: 2768935a4660 ("sfc: reuse pages to avoid DMA mapping/unmapping costs")
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Reported-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/164111288276.5798.10330502993729113868.stgit@palantir17.mph.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 68a18ad71378a56858141c4449e02a30c829763e upstream.
Clang static analysis reports this warnings
mlme.c:5332:7: warning: Branch condition evaluates to a
garbage value
have_higher_than_11mbit)
^~~~~~~~~~~~~~~~~~~~~~~
have_higher_than_11mbit is only set to true some of the time in
ieee80211_get_rates() but is checked all of the time. So
have_higher_than_11mbit needs to be initialized to false.
Fixes: 5d6a1b069b7f ("mac80211: set basic rates earlier")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20211223162848.3243702-1-trix@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7694a7de22c53a312ea98960fcafc6ec62046531 upstream.
Because of the possible failure of the allocation, data might be NULL
pointer and will cause the dereference of the NULL pointer later.
Therefore, it might be better to check it and return -ENOMEM.
Fixes: 6884c6c4bd09 ("RDMA/verbs: Store the write/write_ex uapi entry points in the uverbs_api")
Link: https://lore.kernel.org/r/20211231093315.1917667-1-jiasheng@iscas.ac.cn
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3087a6f36ee028ec095c04a8531d7d33899b7fed upstream.
This code used to copy in an unsigned long worth of data before
the sockptr_t conversion, so restore that.
Fixes: a7b75c5a8c41 ("net: pass a sockptr_t into ->setsockopt")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b35a0f4dd544eaa6162b6d2f13a2557a121ae5fd upstream.
If dst->is_global field is not set, the GRH fields are not cleared
and the following infoleak is reported.
=====================================================
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_user+0x1c9/0x270 lib/usercopy.c:33
instrument_copy_to_user include/linux/instrumented.h:121 [inline]
_copy_to_user+0x1c9/0x270 lib/usercopy.c:33
copy_to_user include/linux/uaccess.h:209 [inline]
ucma_init_qp_attr+0x8c7/0xb10 drivers/infiniband/core/ucma.c:1242
ucma_write+0x637/0x6c0 drivers/infiniband/core/ucma.c:1732
vfs_write+0x8ce/0x2030 fs/read_write.c:588
ksys_write+0x28b/0x510 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__ia32_sys_write+0xdb/0x120 fs/read_write.c:652
do_syscall_32_irqs_on arch/x86/entry/common.c:114 [inline]
__do_fast_syscall_32+0x96/0xf0 arch/x86/entry/common.c:180
do_fast_syscall_32+0x34/0x70 arch/x86/entry/common.c:205
do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:248
entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
Local variable resp created at:
ucma_init_qp_attr+0xa4/0xb10 drivers/infiniband/core/ucma.c:1214
ucma_write+0x637/0x6c0 drivers/infiniband/core/ucma.c:1732
Bytes 40-59 of 144 are uninitialized
Memory access of size 144 starts at ffff888167523b00
Data copied to user address 0000000020000100
CPU: 1 PID: 25910 Comm: syz-executor.1 Not tainted 5.16.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
=====================================================
Fixes: 4ba66093bdc6 ("IB/core: Check for global flag when using ah_attr")
Link: https://lore.kernel.org/r/0e9dd51f93410b7b2f4f5562f52befc878b71afa.1641298868.git.leonro@nvidia.com
Reported-by: syzbot+6d532fa8f9463da290bc@syzkaller.appspotmail.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b712941c8085e638bb92456e866ed3de4404e3d5 upstream.
In the absence of this validation, if the user requests to
configure queues more than the enabled queues, it results in
sending the requested number of queues to the kernel stack
(due to the asynchronous nature of VF response), in which
case the stack might pick a queue to transmit that is not
enabled and result in Tx hang. Fix this bug by
limiting the total number of queues allocated for VF to
active queues of VF.
Fixes: d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf")
Signed-off-by: Ashwin Vijayavel <ashwin.vijayavel@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 01cbf50877e602e2376af89e4a51c30bc574c618 upstream.
Hide i40e opcode information sent during response to VF in case when
untrusted VF tried to change MAC on the VF interface.
This is implemented by adding an additional parameter 'hide' to the
response sent to VF function that hides the display of error
information, but forwards the error code to VF.
Previously it was not possible to send response with some error code
to VF without displaying opcode information.
Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Reviewed-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 754e4382354f7908923a1949d8dc8d05f82f09cb upstream.
Alexander reported a use of uninitialized value in
atusb_set_extended_addr(), that is caused by reading 0 bytes via
usb_control_msg().
Fix it by validating if the number of bytes transferred is actually
correct, since usb_control_msg() may read less bytes, than was requested
by caller.
Fail log:
BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396
Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
Reported-by: Alexander Potapenko <glider@google.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20220104182806.7188-1-paskripkin@gmail.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f28439db470cca8b6b082239314e9fd10bd39034 upstream.
Tag trace_percpu_buffer as a percpu pointer to resolve warnings
reported by sparse:
/linux/kernel/trace/trace.c:3218:46: warning: incorrect type in initializer (different address spaces)
/linux/kernel/trace/trace.c:3218:46: expected void const [noderef] __percpu *__vpp_verify
/linux/kernel/trace/trace.c:3218:46: got struct trace_buffer_struct *
/linux/kernel/trace/trace.c:3234:9: warning: incorrect type in initializer (different address spaces)
/linux/kernel/trace/trace.c:3234:9: expected void const [noderef] __percpu *__vpp_verify
/linux/kernel/trace/trace.c:3234:9: got int *
Link: https://lkml.kernel.org/r/ebabd3f23101d89cb75671b68b6f819f5edc830b.1640255304.git.naveen.n.rao@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 07d777fe8c398 ("tracing: Add percpu buffers for trace_printk()")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 823e670f7ed616d0ce993075c8afe0217885f79d upstream.
With the new osnoise tracer, we are seeing the below splat:
Kernel attempted to read user page (c7d880000) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel data access on read at 0xc7d880000
Faulting instruction address: 0xc0000000002ffa10
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
...
NIP [c0000000002ffa10] __trace_array_vprintk.part.0+0x70/0x2f0
LR [c0000000002ff9fc] __trace_array_vprintk.part.0+0x5c/0x2f0
Call Trace:
[c0000008bdd73b80] [c0000000001c49cc] put_prev_task_fair+0x3c/0x60 (unreliable)
[c0000008bdd73be0] [c000000000301430] trace_array_printk_buf+0x70/0x90
[c0000008bdd73c00] [c0000000003178b0] trace_sched_switch_callback+0x250/0x290
[c0000008bdd73c90] [c000000000e70d60] __schedule+0x410/0x710
[c0000008bdd73d40] [c000000000e710c0] schedule+0x60/0x130
[c0000008bdd73d70] [c000000000030614] interrupt_exit_user_prepare_main+0x264/0x270
[c0000008bdd73de0] [c000000000030a70] syscall_exit_prepare+0x150/0x180
[c0000008bdd73e10] [c00000000000c174] system_call_vectored_common+0xf4/0x278
osnoise tracer on ppc64le is triggering osnoise_taint() for negative
duration in get_int_safe_duration() called from
trace_sched_switch_callback()->thread_exit().
The problem though is that the check for a valid trace_percpu_buffer is
incorrect in get_trace_buf(). The check is being done after calculating
the pointer for the current cpu, rather than on the main percpu pointer.
Fix the check to be against trace_percpu_buffer.
Link: https://lkml.kernel.org/r/a920e4272e0b0635cf20c444707cbce1b2c8973d.1640255304.git.naveen.n.rao@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Fixes: e2ace001176dc9 ("tracing: Choose static tp_printk buffer by explicit nesting count")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dd40f44eabe1e122c6852fabb298aac05b083fce upstream.
Fix the following [-Wstringop-overread] by passing in the variable
instead of the value.
test_vsyscall.c: In function ‘test_process_vm_readv’:
test_vsyscall.c:500:22: warning: ‘__builtin_memcmp_eq’ specified bound 4096 exceeds source size 0 [-Wstringop-overread]
500 | if (!memcmp(buf, (const void *)0xffffffffff600000, 4096)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a5c0042200b28fff3bde6fa128ddeaef97990f8d upstream.
As Yi Zhuang reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=214299
There is potential deadlock during quota data flush as below:
Thread A: Thread B:
f2fs_dquot_acquire
down_read(&sbi->quota_sem)
f2fs_write_checkpoint
block_operations
f2fs_look_all
down_write(&sbi->cp_rwsem)
f2fs_quota_write
f2fs_write_begin
__do_map_lock
f2fs_lock_op
down_read(&sbi->cp_rwsem)
__need_flush_qutoa
down_write(&sbi->quota_sem)
This patch changes block_operations() to use trylock, if it fails,
it means there is potential quota data updater, in this condition,
let's flush quota data first and then trylock again to check dirty
status of quota data.
The side effect is: in heavy race condition (e.g. multi quota data
upaters vs quota data flusher), it may decrease the probability of
synchronizing quota data successfully in checkpoint() due to limited
retry time of quota flush.
Reported-by: Yi Zhuang <zhuangyi1@huawei.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Link: https://lore.kernel.org/r/20220103142053.466768714@linuxfoundation.org
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20220104073841.681360658@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 08389d888287c3823f80b0216766b71e17f0aba5 upstream.
Add a kconfig knob which allows for unprivileged bpf to be disabled by default.
If set, the knob sets /proc/sys/kernel/unprivileged_bpf_disabled to value of 2.
This still allows a transition of 2 -> {0,1} through an admin. Similarly,
this also still keeps 1 -> {1} behavior intact, so that once set to permanently
disabled, it cannot be undone aside from a reboot.
We've also added extra2 with max of 2 for the procfs handler, so that an admin
still has a chance to toggle between 0 <-> 2.
Either way, as an additional alternative, applications can make use of CAP_BPF
that we added a while ago.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/74ec548079189e4e4dffaeb42b8987bb3c852eee.1620765074.git.daniel@iogearbox.net
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5e0c325cdb714409a5b242c9e73a1b61157abb36 upstream.
CPU filtering was not being applied to a script's switch events.
Fixes: 5bf83c29a0ad2e78 ("perf script: Add scripting operation process_switch()")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211215080636.149562-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e22e45fc9e41bf9fcc1e92cfb78eb92786728ef0 upstream.
A real world panic issue was found as follow in Linux 5.4.
BUG: unable to handle page fault for address: ffffde49a863de28
PGD 7e6fe62067 P4D 7e6fe62067 PUD 7e6fe63067 PMD f51e064067 PTE 0
RIP: 0010:tw_timer_handler+0x20/0x40
Call Trace:
<IRQ>
call_timer_fn+0x2b/0x120
run_timer_softirq+0x1ef/0x450
__do_softirq+0x10d/0x2b8
irq_exit+0xc7/0xd0
smp_apic_timer_interrupt+0x68/0x120
apic_timer_interrupt+0xf/0x20
This issue was also reported since 2017 in the thread [1],
unfortunately, the issue was still can be reproduced after fixing
DCCP.
The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net
namespace is destroyed since tcp_sk_ops is registered befrore
ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops
in the list of pernet_list. There will be a use-after-free on
net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net
if there are some inflight time-wait timers.
This bug is not introduced by commit f2bf415cfed7 ("mib: add net to
NET_ADD_STATS_BH") since the net_statistics is a global variable
instead of dynamic allocation and freeing. Actually, commit
61a7e26028b9 ("mib: put net statistics on struct net") introduces
the bug since it put net statistics on struct net and free it when
net namespace is destroyed.
Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug
and replace pr_crit() with panic() since continuing is meaningless
when init_ipv4_mibs() fails.
[1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1
Fixes: 61a7e26028b9 ("mib: put net statistics on struct net")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Cong Wang <cong.wang@bytedance.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211228104145.9426-1-songmuchun@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bc7ec91718c49d938849697cfad98fcd9877cc26 upstream.
The spaceball.c module was not properly parsing the movement reports
coming from the device. The code read axis data as signed 16-bit
little-endian values starting at offset 2.
In fact, axis data in Spaceball movement reports are signed 16-bit
big-endian values starting at offset 3. This was determined first by
visually inspecting the data packets, and later verified by consulting:
http://spacemice.org/pdf/SpaceBall_2003-3003_Protocol.pdf
If this ever worked properly, it was in the time before Git...
Signed-off-by: Leo L. Schwab <ewhac@ewhac.org>
Link: https://lore.kernel.org/r/20211221101630.1146385-1-ewhac@ewhac.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9f3ccdc3f6ef10084ceb3a47df0961bec6196fd0 upstream.
Syzbot has reported warning in __flush_work(). This warning is caused by
work->func == NULL, which means missing work initialization.
This may happen, since input_dev->close() calls
cancel_work_sync(&dev->work), but dev->work initalization happens _after_
input_register_device() call.
So this patch moves dev->work initialization before registering input
device
Fixes: 5a6eb676d3bc ("Input: appletouch - improve powersaving for Geyser3 devices")
Reported-and-tested-by: syzbot+b88c5eae27386b252bbd@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20211230141151.17300-1-paskripkin@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 142c779d05d1fef75134c3cb63f52ccbc96d9e1f upstream.
The PVSCSI implementation in the VMware hypervisor under specific
configuration ("SCSI Bus Sharing" set to "Physical") returns zero dataLen
in the completion descriptor for READ CAPACITY(16). As a result, the kernel
can not detect proper disk geometry. This can be recognized by the kernel
message:
[ 0.776588] sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512.
The PVSCSI implementation in QEMU does not set dataLen at all, keeping it
zeroed. This leads to a boot hang as was reported by Shmulik Ladkani.
It is likely that the controller returns the garbage at the end of the
buffer. Residual length should be set by the driver in that case. The SCSI
layer will erase corresponding data. See commit bdb2b8cab439 ("[SCSI] erase
invalid data returned by device") for details.
Commit e662502b3a78 ("scsi: vmw_pvscsi: Set correct residual data length")
introduced the issue by setting residual length unconditionally, causing
the SCSI layer to erase the useful payload beyond dataLen when this value
is returned as 0.
As a result, considering existing issues in implementations of PVSCSI
controllers, we do not want to call scsi_set_resid() when dataLen ==
0. Calling scsi_set_resid() has no effect if dataLen equals buffer length.
Link: https://lore.kernel.org/lkml/20210824120028.30d9c071@blondie/
Link: https://lore.kernel.org/r/20211220190514.55935-1-amakhalov@vmware.com
Fixes: e662502b3a78 ("scsi: vmw_pvscsi: Set correct residual data length")
Cc: Matt Wang <wwentao@vmware.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Vishal Bhakta <vbhakta@vmware.com>
Cc: VMware PV-Drivers <pv-drivers@vmware.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: linux-scsi@vger.kernel.org
Cc: stable@vger.kernel.org
Reported-and-suggested-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cfd0d84ba28c18b531648c9d4a35ecca89ad9901 upstream.
In 4.13, commit 74310e06be4d ("android: binder: Move buffer out of area shared with user space")
fixed a kernel structure visibility issue. As part of that patch,
sizeof(void *) was used as the buffer size for 0-length data payloads so
the driver could detect abusive clients sending 0-length asynchronous
transactions to a server by enforcing limits on async_free_size.
Unfortunately, on the "free" side, the accounting of async_free_space
did not add the sizeof(void *) back. The result was that up to 8-bytes of
async_free_space were leaked on every async transaction of 8-bytes or
less. These small transactions are uncommon, so this accounting issue
has gone undetected for several years.
The fix is to use "buffer_size" (the allocated buffer size) instead of
"size" (the logical buffer size) when updating the async_free_space
during the free operation. These are the same except for this
corner case of asynchronous transactions with payloads < 8 bytes.
Fixes: 74310e06be4d ("android: binder: Move buffer out of area shared with user space")
Signed-off-by: Todd Kjos <tkjos@google.com>
Cc: stable@vger.kernel.org # 4.14+
Link: https://lore.kernel.org/r/20211220190150.2107077-1-tkjos@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 43f3b8cbcf93da7c2755af4a543280c31f4adf16 upstream.
Add support to set interval also for FS intr and isoc endpoint.
Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP")
Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20211218095749.6250-4-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8c313e3bfd9adae8d5c4ba1cc696dcbc86fbf9bf upstream.
This is caused by uninitialization of list_head.
BUG: KASAN: use-after-free in __list_del_entry_valid+0x34/0xe4
Call trace:
dump_backtrace+0x0/0x298
show_stack+0x24/0x34
dump_stack+0x130/0x1a8
print_address_description+0x88/0x56c
__kasan_report+0x1b8/0x2a0
kasan_report+0x14/0x20
__asan_load8+0x9c/0xa0
__list_del_entry_valid+0x34/0xe4
mtu3_req_complete+0x4c/0x300 [mtu3]
mtu3_gadget_stop+0x168/0x448 [mtu3]
usb_gadget_unregister_driver+0x204/0x3a0
unregister_gadget_item+0x44/0xa4
Fixes: 83374e035b62 ("usb: mtu3: add tracepoints to help debug")
Cc: stable@vger.kernel.org
Reported-by: Yuwen Ng <yuwen.ng@mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20211218095749.6250-3-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a7aae769ca626819a7f9f078ebdc69a8a1b00c81 upstream.
There is a seldom issue that the controller access invalid address
and trigger devapc or emimpu violation. That is due to memory access
is out of order and cause gpd data is not correct.
Add mb() to prohibit compiler or cpu from reordering to make sure GPD
is fully written before setting its HWO.
Fixes: 48e0d3735aa5 ("usb: mtu3: supports new QMU format")
Cc: stable@vger.kernel.org
Reported-by: Eddie Hung <eddie.hung@mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20211218095749.6250-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b1e0887379422975f237d43d8839b751a6bcf154 upstream.
ffs_data_clear is indirectly called from both ffs_fs_kill_sb and
ffs_ep0_release, so it ends up being called twice when userland closes ep0
and then unmounts f_fs.
If userland provided an eventfd along with function's USB descriptors, it
ends up calling eventfd_ctx_put as many times, causing a refcount
underflow.
NULL-ify ffs_eventfd to prevent these extraneous eventfd_ctx_put calls.
Also, set epfiles to NULL right after de-allocating it, for readability.
For completeness, ffs_data_clear actually ends up being called thrice, the
last call being before the whole ffs structure gets freed, so when this
specific sequence happens there is a second underflow happening (but not
being reported):
/sys/kernel/debug/tracing# modprobe usb_f_fs
/sys/kernel/debug/tracing# echo ffs_data_clear > set_ftrace_filter
/sys/kernel/debug/tracing# echo function > current_tracer
/sys/kernel/debug/tracing# echo 1 > tracing_on
(setup gadget, run and kill function userland process, teardown gadget)
/sys/kernel/debug/tracing# echo 0 > tracing_on
/sys/kernel/debug/tracing# cat trace
smartcard-openp-436 [000] ..... 1946.208786: ffs_data_clear <-ffs_data_closed
smartcard-openp-431 [000] ..... 1946.279147: ffs_data_clear <-ffs_data_closed
smartcard-openp-431 [000] .n... 1946.905512: ffs_data_clear <-ffs_data_put
Warning output corresponding to above trace:
[ 1946.284139] WARNING: CPU: 0 PID: 431 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15c
[ 1946.293094] refcount_t: underflow; use-after-free.
[ 1946.298164] Modules linked in: usb_f_ncm(E) u_ether(E) usb_f_fs(E) hci_uart(E) btqca(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) bcm2835_v4l2(CE) bcm2835_mmal_vchiq(CE) videobuf2_vmalloc(E) videobuf2_memops(E) sha512_generic(E) videobuf2_v4l2(E) sha512_arm(E) videobuf2_common(E) videodev(E) cpufreq_dt(E) snd_bcm2835(CE) brcmfmac(E) mc(E) vc4(E) ctr(E) brcmutil(E) snd_soc_core(E) snd_pcm_dmaengine(E) drbg(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) drm_kms_helper(E) cec(E) ansi_cprng(E) rc_core(E) syscopyarea(E) raspberrypi_cpufreq(E) sysfillrect(E) sysimgblt(E) cfg80211(E) max17040_battery(OE) raspberrypi_hwmon(E) fb_sys_fops(E) regmap_i2c(E) ecdh_generic(E) rfkill(E) ecc(E) bcm2835_rng(E) rng_core(E) vchiq(CE) leds_gpio(E) libcomposite(E) fuse(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) sdhci_iproc(E) sdhci_pltfm(E) sdhci(E)
[ 1946.399633] CPU: 0 PID: 431 Comm: smartcard-openp Tainted: G C OE 5.15.0-1-rpi #1 Debian 5.15.3-1
[ 1946.417950] Hardware name: BCM2835
[ 1946.425442] Backtrace:
[ 1946.432048] [<c08d60a0>] (dump_backtrace) from [<c08d62ec>] (show_stack+0x20/0x24)
[ 1946.448226] r7:00000009 r6:0000001c r5:c04a948c r4:c0a64e2c
[ 1946.458412] [<c08d62cc>] (show_stack) from [<c08d9ae0>] (dump_stack+0x28/0x30)
[ 1946.470380] [<c08d9ab8>] (dump_stack) from [<c0123500>] (__warn+0xe8/0x154)
[ 1946.482067] r5:c04a948c r4:c0a71dc8
[ 1946.490184] [<c0123418>] (__warn) from [<c08d6948>] (warn_slowpath_fmt+0xa0/0xe4)
[ 1946.506758] r7:00000009 r6:0000001c r5:c0a71dc8 r4:c0a71e04
[ 1946.517070] [<c08d68ac>] (warn_slowpath_fmt) from [<c04a948c>] (refcount_warn_saturate+0x110/0x15c)
[ 1946.535309] r8:c0100224 r7:c0dfcb84 r6:ffffffff r5:c3b84c00 r4:c24a17c0
[ 1946.546708] [<c04a937c>] (refcount_warn_saturate) from [<c0380134>] (eventfd_ctx_put+0x48/0x74)
[ 1946.564476] [<c03800ec>] (eventfd_ctx_put) from [<bf5464e8>] (ffs_data_clear+0xd0/0x118 [usb_f_fs])
[ 1946.582664] r5:c3b84c00 r4:c2695b00
[ 1946.590668] [<bf546418>] (ffs_data_clear [usb_f_fs]) from [<bf547cc0>] (ffs_data_closed+0x9c/0x150 [usb_f_fs])
[ 1946.609608] r5:bf54d014 r4:c2695b00
[ 1946.617522] [<bf547c24>] (ffs_data_closed [usb_f_fs]) from [<bf547da0>] (ffs_fs_kill_sb+0x2c/0x30 [usb_f_fs])
[ 1946.636217] r7:c0dfcb84 r6:c3a12260 r5:bf54d014 r4:c229f000
[ 1946.646273] [<bf547d74>] (ffs_fs_kill_sb [usb_f_fs]) from [<c0326d50>] (deactivate_locked_super+0x54/0x9c)
[ 1946.664893] r5:bf54d014 r4:c229f000
[ 1946.672921] [<c0326cfc>] (deactivate_locked_super) from [<c0326df8>] (deactivate_super+0x60/0x64)
[ 1946.690722] r5:c2a09000 r4:c229f000
[ 1946.698706] [<c0326d98>] (deactivate_super) from [<c0349a28>] (cleanup_mnt+0xe4/0x14c)
[ 1946.715553] r5:c2a09000 r4:00000000
[ 1946.723528] [<c0349944>] (cleanup_mnt) from [<c0349b08>] (__cleanup_mnt+0x1c/0x20)
[ 1946.739922] r7:c0dfcb84 r6:c3a12260 r5:c3a126fc r4:00000000
[ 1946.750088] [<c0349aec>] (__cleanup_mnt) from [<c0143d10>] (task_work_run+0x84/0xb8)
[ 1946.766602] [<c0143c8c>] (task_work_run) from [<c010bdc8>] (do_work_pending+0x470/0x56c)
[ 1946.783540] r7:5ac3c35a r6:c0d0424c r5:c200bfb0 r4:c200a000
[ 1946.793614] [<c010b958>] (do_work_pending) from [<c01000c0>] (slow_work_pending+0xc/0x20)
[ 1946.810553] Exception stack(0xc200bfb0 to 0xc200bff8)
[ 1946.820129] bfa0: 00000000 00000000 000000aa b5e21430
[ 1946.837104] bfc0: bef867a0 00000001 bef86840 00000034 bef86838 bef86790 bef86794 bef867a0
[ 1946.854125] bfe0: 00000000 bef86798 b67b7a1c b6d626a4 60000010 b5a23760
[ 1946.865335] r10:00000000 r9:c200a000 r8:c0100224 r7:00000034 r6:bef86840 r5:00000001
[ 1946.881914] r4:bef867a0
[ 1946.888793] ---[ end trace 7387f2a9725b28d0 ]---
Fixes: 5e33f6fdf735 ("usb: gadget: ffs: add eventfd notification about ffs events")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Link: https://lore.kernel.org/r/f79eeea29f3f98de6782a064ec0f7351ad2f598f.1639793920.git.plr.vincent@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e4844092581ceec22489b66c42edc88bc6079783 upstream.
The Fresco Logic FL1100 controller needs the TRUST_TX_LENGTH quirk like
other Fresco controllers, but should not have the BROKEN_MSI quirks set.
BROKEN_MSI quirk causes issues in detecting usb drives connected to docks
with this FL1100 controller.
The BROKEN_MSI flag was apparently accidentally set together with the
TRUST_TX_LENGTH quirk
Original patch went to stable so this should go there as well.
Fixes: ea0f69d82119 ("xhci: Enable trust tx length quirk for Fresco FL11 USB controller")
Cc: stable@vger.kernel.org
cc: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211221112825.54690-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5e713c6afa34c0fd6f113bf7bb1c2847172d7b20 upstream.
Used on gfx9 based systems. Fixes incorrect CU counts reported
in the kernel log.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1833
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
enabled
commit b7865173cf6ae59942e2c69326a06e1c1df5ecf6 upstream.
Play a video on the raven (or PCO, raven2) platform, and then do the S3
test. When resume, the following error will be reported:
amdgpu 0000:02:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring
vcn_dec test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block
<vcn_v1_0> failed -110
amdgpu 0000:02:00.0: amdgpu: amdgpu_device_ip_resume failed (-110).
PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110
[why]
When playing the video: The power state flag of the vcn block is set to
POWER_STATE_ON.
When doing suspend: There is no change to the power state flag of the
vcn block, it is still POWER_STATE_ON.
When doing resume: Need to open the power gate of the vcn block and set
the power state flag of the VCN block to POWER_STATE_ON.
But at this time, the power state flag of the vcn block is already
POWER_STATE_ON. The power status flag check in the "8f2cdef drm/amd/pm:
avoid duplicate powergate/ungate setting" patch will return the
amdgpu_dpm_set_powergating_by_smu function directly.
As a result, the gate of the power was not opened, causing the
subsequent ring test to fail.
[how]
In the suspend function of the vcn block, explicitly change the power
state flag of the vcn block to POWER_STATE_OFF.
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1828
Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7175f02c4e5f5a9430113ab9ca0fd0ce98b28a51 upstream.
Replace sa_family_t with __kernel_sa_family_t to fix the following
linux/nfc.h userspace compilation errors:
/usr/include/linux/nfc.h:266:2: error: unknown type name 'sa_family_t'
sa_family_t sa_family;
/usr/include/linux/nfc.h:274:2: error: unknown type name 'sa_family_t'
sa_family_t sa_family;
Fixes: 23b7869c0fd0 ("NFC: add the NFC socket raw protocol")
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 79b69a83705e621b258ac6d8ae6d3bfdb4b930aa upstream.
Fix user-space builds if it includes /usr/include/linux/nfc.h before
some of other headers:
/usr/include/linux/nfc.h:281:9: error: unknown type name ‘size_t’
281 | size_t service_name_len;
| ^~~~~~
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bb436283e25aaf1533ce061605d23a9564447bdf ]
Wrong user data may cause warning in i2c_transfer(), ex: zero msgs.
Userspace should not be able to trigger warnings, so this patch adds
validation checks for user data in compact ioctl to prevent reported
warnings
Reported-and-tested-by: syzbot+e417648b303855b91d8a@syzkaller.appspotmail.com
Fixes: 7d5cb45655f2 ("i2c compat ioctls: move to ->compat_ioctl()")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf2b09fedc17248b315f80fb249087b7d28a69a6 ]
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the and error handling paths.
Fixes: 18a6c85fcc78 ("fsl/fman: Add FMan Port Support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 92a34ab169f9eefe29cd420ce96b0a0a2a1da853 ]
As we can see from the comment of the nla_put() that it could return
-EMSGSIZE if the tailroom of the skb is insufficient.
Therefore, it should be better to check the return value of the
nla_put_u32 and return the error code if error accurs.
Also, there are many other functions have the same problem, and if this
patch is correct, I will commit a new version to fix all.
Fixes: 955dc68cb9b2 ("net/ncsi: Add generic netlink family")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20211229032118.1706294-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9c1952aeaa98b3cfc49e2a79cb2c7d6a674213e9 ]
udpgso_bench_tx call setup_sockaddr() for dest address before
parsing all arguments, if we specify "-p ${dst_port}" after "-D ${dst_ip}",
then ${dst_port} will be ignored, and using default cfg_port 8000.
This will cause test case "multiple GRO socks" failed in udpgro.sh.
Setup sockaddr after parsing all arguments.
Fixes: 3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/ff620d9f-5b52-06ab-5286-44b945453002@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 992d8a4e38f0527f24e273ce3a9cd6dea1a6a436 ]
In case of an error in mlx5e_set_features(), 'netdev->features' must be
updated with the correct state of the device to indicate which features
were updated successfully.
To do that we maintain a copy of 'netdev->features' and update it after
successful feature changes, so we can assign it to back to
'netdev->features' if needed.
However, since not all netdev features are handled by the driver (e.g.
GRO/TSO/etc), some features may not be updated correctly in case of an
error updating another feature.
For example, while requesting to disable TSO (feature which is not
handled by the driver) and enable HW-GRO, if an error occurs during
HW-GRO enable, 'oper_features' will be assigned with 'netdev->features'
and HW-GRO turned off. TSO will remain enabled in such case, which is a
bug.
To solve that, instead of using 'netdev->features' as the baseline of
'oper_features' and changing it on set feature success, use 'features'
instead and update it in case of errors.
Fixes: 75b81ce719b7 ("net/mlx5e: Don't override netdev features field unless in error flow")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 140c7bc7d1195750342ea0e6ab76179499ae7cd7 ]
When allocated, this bitmap is not initialized. Only the first bit is set a
few lines below.
Use bitmap_zalloc() to make sure that it is cleared before being used.
Fixes: 6461b446f2a0 ("ionic: Add interrupts and doorbells")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/6a478eae0b5e6c63774e1f0ddb1a3f8c38fa8ade.1640527506.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f85846bbf43de38fb2c89fe7d2a085608c4eb25a ]
Time synchronization was not properly enabled on non-MSI-X platforms.
Fixes: 2c344ae24501 ("igc: Add support for TX timestamping")
Signed-off-by: James McLaughlin <james.mclaughlin@qsc.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 349d43127dac00c15231e8ffbcaabd70f7b0e544 ]
A crash occurs when smc_cdc_tx_handler() tries to access smc_sock
but smc_release() has already freed it.
[ 4570.695099] BUG: unable to handle page fault for address: 000000002eae9e88
[ 4570.696048] #PF: supervisor write access in kernel mode
[ 4570.696728] #PF: error_code(0x0002) - not-present page
[ 4570.697401] PGD 0 P4D 0
[ 4570.697716] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 4570.698228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc4+ #111
[ 4570.699013] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/0
[ 4570.699933] RIP: 0010:_raw_spin_lock+0x1a/0x30
<...>
[ 4570.711446] Call Trace:
[ 4570.711746] <IRQ>
[ 4570.711992] smc_cdc_tx_handler+0x41/0xc0
[ 4570.712470] smc_wr_tx_tasklet_fn+0x213/0x560
[ 4570.712981] ? smc_cdc_tx_dismisser+0x10/0x10
[ 4570.713489] tasklet_action_common.isra.17+0x66/0x140
[ 4570.714083] __do_softirq+0x123/0x2f4
[ 4570.714521] irq_exit_rcu+0xc4/0xf0
[ 4570.714934] common_interrupt+0xba/0xe0
Though smc_cdc_tx_handler() checked the existence of smc connection,
smc_release() may have already dismissed and released the smc socket
before smc_cdc_tx_handler() further visits it.
smc_cdc_tx_handler() |smc_release()
if (!conn) |
|
|smc_cdc_tx_dismiss_slots()
| smc_cdc_tx_dismisser()
|
|sock_put(&smc->sk) <- last sock_put,
| smc_sock freed
bh_lock_sock(&smc->sk) (panic) |
To make sure we won't receive any CDC messages after we free the
smc_sock, add a refcount on the smc_connection for inflight CDC
message(posted to the QP but haven't received related CQE), and
don't release the smc_connection until all the inflight CDC messages
haven been done, for both success or failed ones.
Using refcount on CDC messages brings another problem: when the link
is going to be destroyed, smcr_link_clear() will reset the QP, which
then remove all the pending CQEs related to the QP in the CQ. To make
sure all the CQEs will always come back so the refcount on the
smc_connection can always reach 0, smc_ib_modify_qp_reset() was replaced
by smc_ib_modify_qp_error().
And remove the timeout in smc_wr_tx_wait_no_pending_sends() since we
need to wait for all pending WQEs done, or we may encounter use-after-
free when handling CQEs.
For IB device removal routine, we need to wait for all the QPs on that
device been destroyed before we can destroy CQs on the device, or
the refcount on smc_connection won't reach 0 and smc_sock cannot be
released.
Fixes: 5f08318f617b ("smc: connection data control (CDC)")
Reported-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 90cee52f2e780345d3629e278291aea5ac74f40f ]
We found smc_llc_send_link_delete_all() sometimes wait
for 2s timeout when testing with RDMA link up/down.
It is possible when a smc_link is in ACTIVATING state,
the underlaying QP is still in RESET or RTR state, which
cannot send any messages out.
smc_llc_send_link_delete_all() use smc_link_usable() to
checks whether the link is usable, if the QP is still in
RESET or RTR state, but the smc_link is in ACTIVATING, this
LLC message will always fail without any CQE entering the
CQ, and we will always wait 2s before timeout.
Since we cannot send any messages through the QP before
the QP enter RTS. I add a wrapper smc_link_sendable()
which checks the state of QP along with the link state.
And replace smc_link_usable() with smc_link_sendable()
in all LLC & CDC message sending routine.
Fixes: 5f08318f617b ("smc: connection data control (CDC)")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 95f7f3e7dc6bd2e735cb5de11734ea2222b1e05a ]
Commit 8f3d65c16679 ("net/smc: fix wait on already cleared link")
introduced link refcounting to avoid waits on already cleared links.
This patch extents and improves the refcounting to cover all
remaining possible cases for this kind of error situation.
Fixes: 15e1b99aadfb ("net/smc: no WR buffer wait for terminating link group")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1b9dadba502234eea7244879b8d5d126bfaf9f0c ]
'phy->pending_skb' is alloced when device probe, but forgot to free
in the error handling path and remove path, this cause memory leak
as follows:
unreferenced object 0xffff88800bc06800 (size 512):
comm "8", pid 11775, jiffies 4295159829 (age 9.032s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000d66c09ce>] __kmalloc_node_track_caller+0x1ed/0x450
[<00000000c93382b3>] kmalloc_reserve+0x37/0xd0
[<000000005fea522c>] __alloc_skb+0x124/0x380
[<0000000019f29f9a>] st21nfca_hci_i2c_probe+0x170/0x8f2
Fix it by freeing 'pending_skb' in error and remove.
Fixes: 68957303f44a ("NFC: ST21NFCA: Add driver for STMicroelectronics ST21NFCA NFC Chip")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5be60a945329d82f06fc755a43eeefbfc5f77d72 ]
Received frames have FCS truncated. There is no need
to subtract FCS length from the statistics.
Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1cd5384c88af5b59bf9f3b6c1a151bc14b88c2cd ]
'ndev' is a managed resource allocated with devm_alloc_etherdev(), so there
is no need to call free_netdev() explicitly or there will be a double
free().
Simplify all error handling paths accordingly.
Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
