summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-20drivers: bus: simple-pm-bus: Add support for probing simple bus only devicesSaravana Kannan
commit 98e96cf80045a383fcc47c58dd4e87b3ae587b3e upstream. fw_devlink could end up creating device links for bus only devices. However, bus only devices don't get probed and can block probe() or sync_state() [1] call backs of other devices. To avoid this, probe these devices using the simple-pm-bus driver. However, there are instances of devices that are not simple buses (they get probed by their specific drivers) that also list the "simple-bus" (or other bus only compatible strings) in their compatible property to automatically populate their child devices. We still want these devices to get probed by their specific drivers. So, we make sure this driver only probes devices that are only buses. [1] - https://lore.kernel.org/lkml/CAPDyKFo9Bxremkb1dDrr4OcXSpE0keVze94Cm=zrkOVxHHxBmQ@mail.gmail.com/ Fixes: c442a0d18744 ("driver core: Set fw_devlink to "permissive" behavior by default") Cc: stable <stable@vger.kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Tested-by: Saravana Kannan <saravanak@google.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210929000735.585237-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20iio: adc: aspeed: set driver data when adc probe.Billy Tsai
commit eb795cd97365a3d3d9da3926d234a7bc32a3bb15 upstream. Fix the issue when adc remove will get the null driver data. Fixed: commit 573803234e72 ("iio: Aspeed ADC") Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210831071458.2334-2-billy_tsai@aspeedtech.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20powerpc/xive: Discard disabled interrupts in get_irqchip_state()Cédric Le Goater
commit 6f779e1d359b8d5801f677c1d49dcfa10bf95674 upstream. When an interrupt is passed through, the KVM XIVE device calls the set_vcpu_affinity() handler which raises the P bit to mask the interrupt and to catch any in-flight interrupts while routing the interrupt to the guest. On the guest side, drivers (like some Intels) can request at probe time some MSIs and call synchronize_irq() to check that there are no in flight interrupts. This will call the XIVE get_irqchip_state() handler which will always return true as the interrupt P bit has been set on the host side and lock the CPU in an infinite loop. Fix that by discarding disabled interrupts in get_irqchip_state(). Fixes: da15c03b047d ("powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race") Cc: stable@vger.kernel.org #v5.4+ Signed-off-by: Cédric Le Goater <clg@kaod.org> Tested-by: seeteena <s1seetee@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211011070203.99726-1-clg@kaod.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20x86/Kconfig: Do not enable AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT automaticallyBorislav Petkov
commit 711885906b5c2df90746a51f4cd674f1ab9fbb1d upstream. This Kconfig option was added initially so that memory encryption is enabled by default on machines which support it. However, devices which have DMA masks that are less than the bit position of the encryption bit, aka C-bit, require the use of an IOMMU or the use of SWIOTLB. If the IOMMU is disabled or in passthrough mode, the kernel would switch to SWIOTLB bounce-buffering for those transfers. In order to avoid that, 2cc13bb4f59f ("iommu: Disable passthrough mode when SME is active") disables the default IOMMU passthrough mode so that devices for which the default 256K DMA is insufficient, can use the IOMMU instead. However 2, there are cases where the IOMMU is disabled in the BIOS, etc. (think the usual hardware folk "oops, I dropped the ball there" cases) or a driver doesn't properly use the DMA APIs or a device has a firmware or hardware bug, e.g.: ea68573d408f ("drm/amdgpu: Fail to load on RAVEN if SME is active") However 3, in the above GPU use case, there are APIs like Vulkan and some OpenGL/OpenCL extensions which are under the assumption that user-allocated memory can be passed in to the kernel driver and both the GPU and CPU can do coherent and concurrent access to the same memory. That cannot work with SWIOTLB bounce buffers, of course. So, in order for those devices to function, drop the "default y" for the SME by default active option so that users who want to have SME enabled, will need to either enable it in their config or use "mem_encrypt=on" on the kernel command line. [ tlendacky: Generalize commit message. ] Fixes: 7744ccdbc16f ("x86/mm: Add Secure Memory Encryption (SME) support") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/8bbacd0e-4580-3194-19d2-a0ecad7df09c@molgen.mpg.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20nvmem: Fix shift-out-of-bound (UBSAN) with byte size cellsStephen Boyd
commit 5d388fa01fa6eb310ac023a363a6cb216d9d8fe9 upstream. If a cell has 'nbits' equal to a multiple of BITS_PER_BYTE the logic *p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0); will become undefined behavior because nbits modulo BITS_PER_BYTE is 0, and we subtract one from that making a large number that is then shifted more than the number of bits that fit into an unsigned long. UBSAN reports this problem: UBSAN: shift-out-of-bounds in drivers/nvmem/core.c:1386:8 shift exponent 64 is too large for 64-bit type 'unsigned long' CPU: 6 PID: 7 Comm: kworker/u16:0 Not tainted 5.15.0-rc3+ #9 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x0/0x170 show_stack+0x24/0x30 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 ubsan_epilogue+0x10/0x54 __ubsan_handle_shift_out_of_bounds+0x180/0x194 __nvmem_cell_read+0x1ec/0x21c nvmem_cell_read+0x58/0x94 nvmem_cell_read_variable_common+0x4c/0xb0 nvmem_cell_read_variable_le_u32+0x40/0x100 a6xx_gpu_init+0x170/0x2f4 adreno_bind+0x174/0x284 component_bind_all+0xf0/0x264 msm_drm_bind+0x1d8/0x7a0 try_to_bring_up_master+0x164/0x1ac __component_add+0xbc/0x13c component_add+0x20/0x2c dp_display_probe+0x340/0x384 platform_probe+0xc0/0x100 really_probe+0x110/0x304 __driver_probe_device+0xb8/0x120 driver_probe_device+0x4c/0xfc __device_attach_driver+0xb0/0x128 bus_for_each_drv+0x90/0xdc __device_attach+0xc8/0x174 device_initial_probe+0x20/0x2c bus_probe_device+0x40/0xa4 deferred_probe_work_func+0x7c/0xb8 process_one_work+0x128/0x21c process_scheduled_works+0x40/0x54 worker_thread+0x1ec/0x2a8 kthread+0x138/0x158 ret_from_fork+0x10/0x20 Fix it by making sure there are any bits to mask out. Fixes: 69aba7948cbe ("nvmem: Add a simple NVMEM framework for consumers") Cc: Douglas Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211013124511.18726-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20EDAC/armada-xp: Fix output of uncorrectable error counterHans Potsch
commit d9b7748ffc45250b4d7bcf22404383229bc495f5 upstream. The number of correctable errors is displayed as uncorrectable errors because the "SBE" error count is passed to both calls of edac_mc_handle_error(). Pass the correct uncorrectable error count to the second edac_mc_handle_error() call when logging uncorrectable errors. [ bp: Massage commit message. ] Fixes: 7f6998a41257 ("ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC") Signed-off-by: Hans Potsch <hans.potsch@nokia.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20211006121332.58788-1-hans.potsch@nokia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20virtio: write back F_VERSION_1 before validateHalil Pasic
commit 2f9a174f918e29608564c7a4e8329893ab604fb4 upstream. The virtio specification virtio-v1.1-cs01 states: "Transitional devices MUST detect Legacy drivers by detecting that VIRTIO_F_VERSION_1 has not been acknowledged by the driver." This is exactly what QEMU as of 6.1 has done relying solely on VIRTIO_F_VERSION_1 for detecting that. However, the specification also says: "... the driver MAY read (but MUST NOT write) the device-specific configuration fields to check that it can support the device ..." before setting FEATURES_OK. In that case, any transitional device relying solely on VIRTIO_F_VERSION_1 for detecting legacy drivers will return data in legacy format. In particular, this implies that it is in big endian format for big endian guests. This naturally confuses the driver which expects little endian in the modern mode. It is probably a good idea to amend the spec to clarify that VIRTIO_F_VERSION_1 can only be relied on after the feature negotiation is complete. Before validate callback existed, config space was only read after FEATURES_OK. However, we already have two regressions, so let's address this here as well. The regressions affect the VIRTIO_NET_F_MTU feature of virtio-net and the VIRTIO_BLK_F_BLK_SIZE feature of virtio-blk for BE guests when virtio 1.0 is used on both sides. The latter renders virtio-blk unusable with DASD backing, because things simply don't work with the default. See Fixes tags for relevant commits. For QEMU, we can work around the issue by writing out the feature bits with VIRTIO_F_VERSION_1 bit set. We (ab)use the finalize_features config op for this. This isn't enough to address all vhost devices since these do not get the features until FEATURES_OK, however it looks like the affected devices actually never handled the endianness for legacy mode correctly, so at least that's not a regression. No devices except virtio net and virtio blk seem to be affected. Long term the right thing to do is to fix the hypervisors. Cc: <stable@vger.kernel.org> #v4.11 Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Fixes: 82e89ea077b9 ("virtio-blk: Add validation for block size in config space") Fixes: fe36cbe0671e ("virtio_net: clear MTU when out of range") Reported-by: markver@us.ibm.com Reviewed-by: Cornelia Huck <cohuck@redhat.com> Link: https://lore.kernel.org/r/20211011053921.1198936-1-pasic@linux.ibm.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20misc: fastrpc: Add missing lock before accessing find_vma()Srinivas Kandagatla
commit f9a470db2736b01538ad193c316eb3f26be37d58 upstream. fastrpc driver is using find_vma() without any protection, as a result we see below warning due to recent patch 5b78ed24e8ec ("mm/pagemap: add mmap_assert_locked() annotations to find_vma*()") which added mmap_assert_locked() in find_vma() function. This bug went un-noticed in previous versions. Fix this issue by adding required protection while calling find_vma(). CPU: 0 PID: 209746 Comm: benchmark_model Not tainted 5.15.0-rc2-00445-ge14fe2bf817a-dirty #969 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : find_vma+0x64/0xd0 lr : find_vma+0x60/0xd0 sp : ffff8000158ebc40 ... Call trace: find_vma+0x64/0xd0 fastrpc_internal_invoke+0x570/0xda8 fastrpc_device_ioctl+0x3e0/0x928 __arm64_sys_ioctl+0xac/0xf0 invoke_syscall+0x44/0x100 el0_svc_common.constprop.3+0x70/0xf8 do_el0_svc+0x24/0x88 el0_svc+0x3c/0x138 el0t_64_sync_handler+0x90/0xb8 el0t_64_sync+0x180/0x184 Fixes: 80f3afd72bd4 ("misc: fastrpc: consider address offset before sending to DSP") Cc: stable@vger.kernel.org Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210922154326.8927-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20USB: serial: option: add prod. id for Quectel EG91Tomaz Solc
commit c184accc4a42c7872dc8e8d0fc97a740dc61fe24 upstream. Adding support for Quectel EG91 LTE module. The interface layout is same as for EG95. usb-devices output: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0191 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan Interfaces: 0: Diag 1: GNSS 2: AT-command interface/modem 3: Modem 4: QMI Signed-off-by: Tomaz Solc <tomaz.solc@tablix.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20USB: serial: option: add Telit LE910Cx composition 0x1204Daniele Palmas
commit f5a8a07edafed8bede17a95ef8940fe3a57a77d5 upstream. Add the following Telit LE910Cx composition: 0x1204: tty, adb, mbim, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20211004105655.8515-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20USB: serial: option: add Quectel EC200S-CN module supportYu-Tung Chang
commit 2263eb7370060bdb0013bc14e1a7c9bf33617a55 upstream. Add usb product id of the Quectel EC200S-CN module. usb-devices output for 0x6002: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6002 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber=0000 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) Signed-off-by: Yu-Tung Chang <mtwget@gmail.com> Link: https://lore.kernel.org/r/20210930021112.330396-1-mtwget@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20USB: serial: qcserial: add EM9191 QDL supportAleksander Morgado
commit 11c52d250b34a0862edc29db03fbec23b30db6da upstream. When the module boots into QDL download mode it exposes the 1199:90d2 ids, which can be mapped to the qcserial driver, and used to run firmware upgrades (e.g. with the qmi-firmware-update program). T: Bus=01 Lev=03 Prnt=08 Port=03 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=90d2 Rev=00.00 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM9191 S: SerialNumber=8W0382004102A109 C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20Input: xpad - add support for another USB ID of Nacon GC-100Michael Cullen
commit 3378a07daa6cdd11e042797454c706d1c69f9ca6 upstream. The Nacon GX100XF is already mapped, but it seems there is a Nacon GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other colours exist) with a different USB ID when in XInput mode. Signed-off-by: Michael Cullen <michael@michaelcullen.name> Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20usb: musb: dsps: Fix the probe error pathMiquel Raynal
commit c2115b2b16421d93d4993f3fe4c520e91d6fe801 upstream. Commit 7c75bde329d7 ("usb: musb: musb_dsps: request_irq() after initializing musb") has inverted the calls to dsps_setup_optional_vbus_irq() and dsps_create_musb_pdev() without updating correctly the error path. dsps_create_musb_pdev() allocates and registers a new platform device which must be unregistered and freed with platform_device_unregister(), and this is missing upon dsps_setup_optional_vbus_irq() error. While on the master branch it seems not to trigger any issue, I observed a kernel crash because of a NULL pointer dereference with a v5.10.70 stable kernel where the patch mentioned above was backported. With this kernel version, -EPROBE_DEFER is returned the first time dsps_setup_optional_vbus_irq() is called which triggers the probe to error out without unregistering the platform device. Unfortunately, on the Beagle Bone Black Wireless, the platform device still living in the system is being used by the USB Ethernet gadget driver, which during the boot phase triggers the crash. My limited knowledge of the musb world prevents me to revert this commit which was sent to silence a robot warning which, as far as I understand, does not make sense. The goal of this patch was to prevent an IRQ to fire before the platform device being registered. I think this cannot ever happen due to the fact that enabling the interrupts is done by the ->enable() callback of the platform musb device, and this platform device must be already registered in order for the core or any other user to use this callback. Hence, I decided to fix the error path, which might prevent future errors on mainline kernels while also fixing older ones. Fixes: 7c75bde329d7 ("usb: musb: musb_dsps: request_irq() after initializing musb") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20211005221631.1529448-1-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20efi: Change down_interruptible() in virt_efi_reset_system() to down_trylock()Zhang Jianhua
commit 38fa3206bf441911258e5001ac8b6738693f8d82 upstream. While reboot the system by sysrq, the following bug will be occur. BUG: sleeping function called from invalid context at kernel/locking/semaphore.c:90 in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 10052, name: rc.shutdown CPU: 3 PID: 10052 Comm: rc.shutdown Tainted: G W O 5.10.0 #1 Call trace: dump_backtrace+0x0/0x1c8 show_stack+0x18/0x28 dump_stack+0xd0/0x110 ___might_sleep+0x14c/0x160 __might_sleep+0x74/0x88 down_interruptible+0x40/0x118 virt_efi_reset_system+0x3c/0xd0 efi_reboot+0xd4/0x11c machine_restart+0x60/0x9c emergency_restart+0x1c/0x2c sysrq_handle_reboot+0x1c/0x2c __handle_sysrq+0xd0/0x194 write_sysrq_trigger+0xbc/0xe4 proc_reg_write+0xd4/0xf0 vfs_write+0xa8/0x148 ksys_write+0x6c/0xd8 __arm64_sys_write+0x18/0x28 el0_svc_common.constprop.3+0xe4/0x16c do_el0_svc+0x1c/0x2c el0_svc+0x20/0x30 el0_sync_handler+0x80/0x17c el0_sync+0x158/0x180 The reason for this problem is that irq has been disabled in machine_restart() and then it calls down_interruptible() in virt_efi_reset_system(), which would occur sleep in irq context, it is dangerous! Commit 99409b935c9a("locking/semaphore: Add might_sleep() to down_*() family") add might_sleep() in down_interruptible(), so the bug info is here. down_trylock() can solve this problem, cause there is no might_sleep. -------- Cc: <stable@vger.kernel.org> Signed-off-by: Zhang Jianhua <chris.zjh@huawei.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20efi/cper: use stack buffer for error record decodingArd Biesheuvel
commit b3a72ca80351917cc23f9e24c35f3c3979d3c121 upstream. Joe reports that using a statically allocated buffer for converting CPER error records into human readable text is probably a bad idea. Even though we are not aware of any actual issues, a stack buffer is clearly a better choice here anyway, so let's move the buffer into the stack frames of the two functions that refer to it. Cc: <stable@vger.kernel.org> Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20cb710: avoid NULL pointer subtractionArnd Bergmann
commit 42641042c10c757fe10cc09088cf3f436cec5007 upstream. clang-14 complains about an unusual way of converting a pointer to an integer: drivers/misc/cb710/sgbuf2.c:50:15: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction] return ((ptr - NULL) & 3) != 0; Replace this with a normal cast to uintptr_t. Fixes: 5f5bac8272be ("mmc: Driver for CB710/720 memory card reader (MMC part)") Cc: stable <stable@vger.kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210927121408.939246-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20xhci: Enable trust tx length quirk for Fresco FL11 USB controllerNikolay Martynov
commit ea0f69d8211963c4b2cc1998b86779a500adb502 upstream. Tested on SD5200T TB3 dock which has Fresco Logic FL1100 USB 3.0 Host Controller. Before this patch streaming video from USB cam made mouse and keyboard connected to the same USB bus unusable. Also video was jerky. With this patch streaming video doesn't have any effect on other periferals and video is smooth. Cc: stable@vger.kernel.org Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211008092547.3996295-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20xhci: Fix command ring pointer corruption while aborting a commandPavankumar Kondeti
commit ff0e50d3564f33b7f4b35cadeabd951d66cfc570 upstream. The command ring pointer is located at [6:63] bits of the command ring control register (CRCR). All the control bits like command stop, abort are located at [0:3] bits. While aborting a command, we read the CRCR and set the abort bit and write to the CRCR. The read will always give command ring pointer as all zeros. So we essentially write only the control bits. Since we split the 64 bit write into two 32 bit writes, there is a possibility of xHC command ring stopped before the upper dword (all zeros) is written. If that happens, xHC updates the upper dword of its internal command ring pointer with all zeros. Next time, when the command ring is restarted, we see xHC memory access failures. Fix this issue by only writing to the lower dword of CRCR where all control bits are located. Cc: stable@vger.kernel.org Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211008092547.3996295-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20xhci: guard accesses to ep_state in xhci_endpoint_reset()Jonathan Bell
commit a01ba2a3378be85538e0183ae5367c1bc1d5aaf3 upstream. See https://github.com/raspberrypi/linux/issues/3981 Two read-modify-write cycles on ep->ep_state are not guarded by xhci->lock. Fix these. Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") Cc: stable@vger.kernel.org Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211008092547.3996295-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20USB: xhci: dbc: fix tty registration raceJohan Hovold
commit 880de403777376e50bdf60def359fa50a722006f upstream. Make sure to allocate resources before registering the tty device to avoid having a racing open() and write() fail to enable rx or dereference a NULL pointer when accessing the uninitialised fifo. Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Cc: stable@vger.kernel.org # 4.16 Cc: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211008092547.3996295-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20mei: me: add Ice Lake-N device id.Andy Shevchenko
commit 75c10c5e7a715550afdd51ef8cfd1d975f48f9e1 upstream. Add Ice Lake-N device ID. The device can be found on MacBookPro16,2 [1]. [1]: https://linux-hardware.org/?probe=f1c5cf0c43 Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211001173644.16068-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() failsJames Morse
commit 64e87d4bd3201bf8a4685083ee4daf5c0d001452 upstream. domain_add_cpu() is called whenever a CPU is brought online. The earlier call to domain_setup_ctrlval() allocates the control value arrays. If domain_setup_mon_state() fails, the control value arrays are not freed. Add the missing kfree() calls. Fixes: 1bd2a63b4f0de ("x86/intel_rdt/mba_sc: Add initialization support") Fixes: edf6fa1c4a951 ("x86/intel_rdt/cqm: Add RMID (Resource monitoring ID) management") Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20210917165958.28313-1-james.morse@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20btrfs: fix abort logic in btrfs_replace_file_extentsJosef Bacik
commit 4afb912f439c4bc4e6a4f3e7547f2e69e354108f upstream. Error injection testing uncovered a case where we'd end up with a corrupt file system with a missing extent in the middle of a file. This occurs because the if statement to decide if we should abort is wrong. The only way we would abort in this case is if we got a ret != -EOPNOTSUPP and we called from the file clone code. However the prealloc code uses this path too. Instead we need to abort if there is an error, and the only error we _don't_ abort on is -EOPNOTSUPP and only if we came from the clone file code. CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20btrfs: update refs for any root except tree log rootsJosef Bacik
commit d175209be04d7d263fa1a54cde7608c706c9d0d7 upstream. I hit a stuck relocation on btrfs/061 during my overnight testing. This turned out to be because we had left over extent entries in our extent root for a data reloc inode that no longer existed. This happened because in btrfs_drop_extents() we only update refs if we have SHAREABLE set or we are the tree_root. This regression was introduced by aeb935a45581 ("btrfs: don't set SHAREABLE flag for data reloc tree") where we stopped setting SHAREABLE for the data reloc tree. The problem here is we actually do want to update extent references for data extents in the data reloc tree, in fact we only don't want to update extent references if the file extents are in the log tree. Update this check to only skip updating references in the case of the log tree. This is relatively rare, because you have to be running scrub at the same time, which is what btrfs/061 does. The data reloc inode has its extents pre-allocated, and then we copy the extent into the pre-allocated chunks. We theoretically should never be calling btrfs_drop_extents() on a data reloc inode. The exception of course is with scrub, if our pre-allocated extent falls inside of the block group we are scrubbing, then the block group will be marked read only and we will be forced to cow that extent. This means we will call btrfs_drop_extents() on that range when we COW that file extent. This isn't really problematic if we do this, the data reloc inode requires that our extent lengths match exactly with the extent we are copying, thankfully we validate the extent is correct with get_new_location(), so if we happen to COW only part of the extent we won't link it in when we do the relocation, so we are safe from any other shenanigans that arise because of this interaction with scrub. Fixes: aeb935a45581 ("btrfs: don't set SHAREABLE flag for data reloc tree") CC: stable@vger.kernel.org # 5.8+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20btrfs: check for error when looking up inode during dir entry replayFilipe Manana
commit cfd312695b71df04c3a2597859ff12c470d1e2e4 upstream. At replay_one_name(), we are treating any error from btrfs_lookup_inode() as if the inode does not exists. Fix this by checking for an error and returning it to the caller. CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20btrfs: deal with errors when adding inode reference during log replayFilipe Manana
commit 52db77791fe24538c8aa2a183248399715f6b380 upstream. At __inode_add_ref(), we treating any error returned from btrfs_lookup_dir_item() or from btrfs_lookup_dir_index_item() as meaning that there is no existing directory entry in the fs/subvolume tree. This is not correct since we can get errors such as, for example, -EIO when reading extent buffers while searching the fs/subvolume's btree. So fix that and return the error to the caller when it is not -ENOENT. CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20btrfs: deal with errors when replaying dir entry during log replayFilipe Manana
commit e15ac6413745e3def00e663de00aea5a717311c1 upstream. At replay_one_one(), we are treating any error returned from btrfs_lookup_dir_item() or from btrfs_lookup_dir_index_item() as meaning that there is no existing directory entry in the fs/subvolume tree. This is not correct since we can get errors such as, for example, -EIO when reading extent buffers while searching the fs/subvolume's btree. So fix that and return the error to the caller when it is not -ENOENT. CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20btrfs: unlock newly allocated extent buffer after errorQu Wenruo
commit 19ea40dddf1833db868533958ca066f368862211 upstream. [BUG] There is a bug report that injected ENOMEM error could leave a tree block locked while we return to user-space: BTRFS info (device loop0): enabling ssd optimizations FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 0 PID: 7579 Comm: syz-executor Not tainted 5.15.0-rc1 #16 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8d/0xcf lib/dump_stack.c:106 fail_dump lib/fault-inject.c:52 [inline] should_fail+0x13c/0x160 lib/fault-inject.c:146 should_failslab+0x5/0x10 mm/slab_common.c:1328 slab_pre_alloc_hook.constprop.99+0x4e/0xc0 mm/slab.h:494 slab_alloc_node mm/slub.c:3120 [inline] slab_alloc mm/slub.c:3214 [inline] kmem_cache_alloc+0x44/0x280 mm/slub.c:3219 btrfs_alloc_delayed_extent_op fs/btrfs/delayed-ref.h:299 [inline] btrfs_alloc_tree_block+0x38c/0x670 fs/btrfs/extent-tree.c:4833 __btrfs_cow_block+0x16f/0x7d0 fs/btrfs/ctree.c:415 btrfs_cow_block+0x12a/0x300 fs/btrfs/ctree.c:570 btrfs_search_slot+0x6b0/0xee0 fs/btrfs/ctree.c:1768 btrfs_insert_empty_items+0x80/0xf0 fs/btrfs/ctree.c:3905 btrfs_new_inode+0x311/0xa60 fs/btrfs/inode.c:6530 btrfs_create+0x12b/0x270 fs/btrfs/inode.c:6783 lookup_open+0x660/0x780 fs/namei.c:3282 open_last_lookups fs/namei.c:3352 [inline] path_openat+0x465/0xe20 fs/namei.c:3557 do_filp_open+0xe3/0x170 fs/namei.c:3588 do_sys_openat2+0x357/0x4a0 fs/open.c:1200 do_sys_open+0x87/0xd0 fs/open.c:1216 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x34/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x46ae99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f46711b9c48 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 RAX: ffffffffffffffda RBX: 000000000078c0a0 RCX: 000000000046ae99 RDX: 0000000000000000 RSI: 00000000000000a1 RDI: 0000000020005800 RBP: 00007f46711b9c80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000017 R13: 0000000000000000 R14: 000000000078c0a0 R15: 00007ffc129da6e0 ================================================ WARNING: lock held when returning to user space! 5.15.0-rc1 #16 Not tainted ------------------------------------------------ syz-executor/7579 is leaving the kernel with locks still held! 1 lock held by syz-executor/7579: #0: ffff888104b73da8 (btrfs-tree-01/1){+.+.}-{3:3}, at: __btrfs_tree_lock+0x2e/0x1a0 fs/btrfs/locking.c:112 [CAUSE] In btrfs_alloc_tree_block(), after btrfs_init_new_buffer(), the new extent buffer @buf is locked, but if later operations like adding delayed tree ref fail, we just free @buf without unlocking it, resulting above warning. [FIX] Unlock @buf in out_free_buf: label. Reported-by: Hao Sun <sunhao.th@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CACkBjsZ9O6Zr0KK1yGn=1rQi6Crh1yeCRdTSBxx9R99L4xdn-Q@mail.gmail.com/ CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20drm/msm: Avoid potential overflow in timeout_to_jiffies()Marek Vasut
commit 171316a68d9a8e0d9e28b7cf4c15afc4c6244a4e upstream. The return type of ktime_divns() is s64. The timeout_to_jiffies() currently assigns the result of this ktime_divns() to unsigned long, which on 32 bit systems may overflow. Furthermore, the result of this function is sometimes also passed to functions which expect signed long, dma_fence_wait_timeout() is one such example. Fix this by adjusting the type of remaining_jiffies to s64, so we do not suffer overflow there, and return a value limited to range of 0..INT_MAX, which is safe for all usecases of this timeout. The above overflow can be triggered if userspace passes in too large timeout value, larger than INT_MAX / HZ seconds. The kernel detects it and complains about "schedule_timeout: wrong timeout value %lx" and generates a warning backtrace. Note that this fixes commit 6cedb8b377bb ("drm/msm: avoid using 'timespec'"), because the previously used timespec_to_jiffies() function returned unsigned long instead of s64: static inline unsigned long timespec_to_jiffies(const struct timespec *value) Fixes: 6cedb8b377bb ("drm/msm: avoid using 'timespec'") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Rob Clark <robdclark@chromium.org> Cc: stable@vger.kernel.org # 5.6+ Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210917005913.157379-1-marex@denx.de Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20arm64/hugetlb: fix CMA gigantic page order for non-4K PAGE_SIZEMike Kravetz
commit 2e5809a4ddb15969503e43b06662a9a725f613ea upstream. For non-4K PAGE_SIZE configs, the largest gigantic huge page size is CONT_PMD_SHIFT order. On arm64 with 64K PAGE_SIZE, the gigantic page is 16G. Therefore, one should be able to specify 'hugetlb_cma=16G' on the kernel command line so that one gigantic page can be allocated from CMA. However, when adding such an option the following message is produced: hugetlb_cma: cma area should be at least 8796093022208 MiB This is because the calculation for non-4K gigantic page order is incorrect in the arm64 specific routine arm64_hugetlb_cma_reserve(). Fixes: abb7962adc80 ("arm64/hugetlb: Reserve CMA areas for gigantic pages on 16K and 64K configs") Cc: <stable@vger.kernel.org> # 5.9.x Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20211005202529.213812-1-mike.kravetz@oracle.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20csky: Fixup regs.sr broken in ptraceGuo Ren
commit af89ebaa64de726ca0a39bbb0bf0c81a1f43ad50 upstream. gpr_get() return the entire pt_regs (include sr) to userspace, if we don't restore the C bit in gpr_set, it may break the ALU result in that context. So the C flag bit is part of gpr context, that's why riscv totally remove the C bit in the ISA. That makes sr reg clear from userspace to supervisor privilege. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20csky: don't let sigreturn play with priveleged bits of status registerAl Viro
commit fbd63c08cdcca5fb1315aca3172b3c9c272cfb4f upstream. csky restore_sigcontext() blindly overwrites regs->sr with the value it finds in sigcontext. Attacker can store whatever they want in there, which includes things like S-bit. Userland shouldn't be able to set that, or anything other than C flag (bit 0). Do the same thing other architectures with protected bits in flags register do - preserve everything that shouldn't be settable in user mode, picking the rest from the value saved is sigcontext. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Guo Ren <guoren@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20clk: socfpga: agilex: fix duplicate s2f_user0_clkDinh Nguyen
commit 09540fa337196be20e9f0241652364f09275d374 upstream. Remove the duplicate s2f_user0_clk and the unused s2f_usr0_mux define. Fixes: f817c132db67 ("clk: socfpga: agilex: fix up s2f_user0_clk representation") Cc: stable@vger.kernel.org Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20210916225126.1427700-1-dinguyen@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20s390: fix strrchr() implementationRoberto Sassu
commit 8e0ab8e26b72a80e991c66a8abc16e6c856abe3d upstream. Fix two problems found in the strrchr() implementation for s390 architectures: evaluate empty strings (return the string address instead of NULL, if '\0' is passed as second argument); evaluate the first character of non-empty strings (the current implementation stops at the second). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reported-by: Heiko Carstens <hca@linux.ibm.com> (incorrect behavior with empty strings) Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Link: https://lore.kernel.org/r/20211005120836.60630-1-roberto.sassu@huawei.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^'Steven Rostedt
commit be358af1191b1b2fedebd8f3421cafdc8edacc7d upstream. I received a build failure for a new patch I'm working on the nds32 architecture, and when I went to test it, I couldn't get to my build error, because it failed to build with a bunch of: Error: invalid operands (*UND* and *UND* sections) for `^' issues with various files. Those files were temporary asm files that looked like: kernel/.tmp_mc_fork.s I decided to look deeper, and found that the "mc" portion of that name stood for "mcount", and was created by the recordmcount.pl script. One that I wrote over a decade ago. Once I knew the source of the problem, I was able to investigate it further. The way the recordmcount.pl script works (BTW, there's a C version that simply modifies the ELF object) is by doing an "objdump" on the object file. Looks for all the calls to "mcount", and creates an offset of those locations from some global variable it can use (usually a global function name, found with <.*>:). Creates a asm file that is a table of references to these locations, using the found variable/function. Compiles it and links it back into the original object file. This asm file is called ".tmp_mc_<object_base_name>.s". The problem here is that the objdump produced by the nds32 object file, contains things that look like: 0000159a <.L3^B1>: 159a: c6 00 beqz38 $r6, 159a <.L3^B1> 159a: R_NDS32_9_PCREL_RELA .text+0x159e 159c: 84 d2 movi55 $r6, #-14 159e: 80 06 mov55 $r0, $r6 15a0: ec 3c addi10.sp #0x3c Where ".L3^B1 is somehow selected as the "global" variable to index off of. Then the assembly file that holds the mcount locations looks like this: .section __mcount_loc,"a",@progbits .align 2 .long .L3^B1 + -5522 .long .L3^B1 + -5384 .long .L3^B1 + -5270 .long .L3^B1 + -5098 .long .L3^B1 + -4970 .long .L3^B1 + -4758 .long .L3^B1 + -4122 [...] And when it is compiled back to an object to link to the original object, the compile fails on the "^" symbol. Simple solution for now, is to have the perl script ignore using function symbols that have an "^" in the name. Link: https://lkml.kernel.org/r/20211014143507.4ad2c0f7@gandalf.local.home Cc: stable@vger.kernel.org Acked-by: Greentime Hu <green.hu@gmail.com> Fixes: fbf58a52ac088 ("nds32/ftrace: Add RECORD_MCOUNT support") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20ALSA: hda/realtek: Fix the mic type detection issue for ASUS G551JWHui Wang
commit a3fd1a986e499a06ac5ef95c3a39aa4611e7444c upstream. We need to define the codec pin 0x1b to be the mic, but somehow the mic doesn't support hot plugging detection, and Windows also has this issue, so we set it to phantom headset-mic. Also the determine_headset_type() often returns the omtp type by a mistake when we plug a ctia headset, this makes the mic can't record sound at all. Because most of the headset are ctia type nowadays and some machines have the fixed ctia type audio jack, it is possible this machine has the fixed ctia jack too. Here we set this mic jack to fixed ctia type, this could avoid the mic type detection mistake and make the ctia headset work stable. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214537 Reported-and-tested-by: msd <msd.mmq@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20211012114748.5238-1-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo 13s Gen2Cameron Berkenpas
commit 023a062f238129e8a542b5163c4350ceb076283e upstream. The previous patch's HDA verb initialization for the Lenovo 13s sequence was slightly off. This updated verb sequence has been tested and confirmed working. Fixes: ad7cc2d41b7a ("ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops.") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208555 Cc: <stable@vger.kernel.org> Signed-off-by: Cameron Berkenpas <cam@neo-zeon.de> Link: https://lore.kernel.org/r/20211010225410.23423-1-cam@neo-zeon.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20ALSA: hda/realtek: Add quirk for TongFang PHxTxX1Werner Sembach
commit dd6dd6e3c791db7fdbc5433ec7e450717aa3a0ce upstream. This applies a SND_PCI_QUIRK(...) to the TongFang PHxTxX1 barebone. This fixes the issue of the internal Microphone not working after booting another OS. When booting a certain another OS this barebone keeps some coeff settings even after a cold shutdown. These coeffs prevent the microphone detection from working in Linux, making the Laptop think that there is always an external microphone plugged-in and therefore preventing the use of the internal one. The relevant indexes and values where gathered by naively diff-ing and reading a working and a non-working coeff dump. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211006130415.538243-1-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20ALSA: hda/realtek - ALC236 headset MIC recording issueKailang Yang
commit 5aec98913095ed3b4424ed6c5fdeb6964e9734da upstream. In power save mode, the recording voice from headset mic will 2s more delay. Add this patch will solve this issue. [ minor coding style fix by tiwai ] Signed-off-by: Kailang Yang <kailang@realtek.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/ccb0cdd5bbd7486eabbd8d987d384cb0@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20ALSA: hda/realtek: Add quirk for Clevo X170KM-GWerner Sembach
commit cc03069a397005da24f6783835c274d5aedf6043 upstream. This applies a SND_PCI_QUIRK(...) to the Clevo X170KM-G barebone. This fixes the issue of the devices internal Speaker not working. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211001133111.428249-3-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20ALSA: hda/realtek: Complete partial device name to avoid ambiguityWerner Sembach
commit 1f8d398e1cd8813f8ec16d55c086e8270a9c18ab upstream. The string "Clevo X170" is not enough to unambiguously identify the correct device. Fixing it so another Clevo barebone name starting with "X170" can be added without causing confusion. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211001133111.428249-2-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20ALSA: hda - Enable headphone mic on Dell Latitude laptops with ALC3254Chris Chiu
commit 2b987fe84429361c7f189568c476d1bd00d2ff7e upstream. The headphone mic is not working on Dell Latitude laptops with ALC3254. The codec vendor id is 0x10ec0295 and share the same pincfg as defined in ALC295_STANDARD_PINS. So the ALC269_FIXUP_DELL1_MIC_NO_PRESENCE will be applied per alc269_pin_fixup_tbl[] but actually the headphone mic is using NID 0x1b instead of 0x1a. The ALC269_FIXUP_DELL4_MIC_NO_PRESENCE need to be applied instead. Use ALC269_FIXUP_DELL4_MIC_NO_PRESENCE for particular models before a generic fixup comes out. Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211001062856.1037901-1-chris.chiu@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20ALSA: hda/realtek: Enable 4-speaker output for Dell Precision 5560 laptopJohn Liu
commit eb676622846b34a751e2ff9b5910a5322a4e0000 upstream. The Dell Precision 5560 laptop appears to use the 4-speakers-on-ALC289 audio just like its sibling product XPS 9510, so it requires the same quirk to enable woofer output. Tested on my Dell Precision 5560. Signed-off-by: John Liu <johnliu55tw@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210930115316.659-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20ALSA: seq: Fix a potential UAF by wrong private_free call orderTakashi Iwai
commit 1f8763c59c4ec6254d629fe77c0a52220bd907aa upstream. John Keeping reported and posted a patch for a potential UAF in rawmidi sequencer destruction: the snd_rawmidi_dev_seq_free() may be called after the associated rawmidi object got already freed. After a deeper look, it turned out that the bug is rather the incorrect private_free call order for a snd_seq_device. The snd_seq_device private_free gets called at the release callback of the sequencer device object, while this was rather expected to be executed at the snd_device call chains that runs at the beginning of the whole card-free procedure. It's been broken since the rewrite of sequencer-device binding (although it hasn't surfaced because the sequencer device release happens usually right along with the card device release). This patch corrects the private_free call to be done in the right place, at snd_seq_device_dev_free(). Fixes: 7c37ae5c625a ("ALSA: seq: Rewrite sequencer device binding with standard bus") Reported-and-tested-by: John Keeping <john@metanate.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210930114114.8645-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20ALSA: pcm: Workaround for a wrong offset in SYNC_PTR compat ioctlTakashi Iwai
commit 228af5a4fa3a8293bd8b7ac5cf59548ee29627bf upstream. Michael Forney reported an incorrect padding type that was defined in the commit 80fe7430c708 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control") for PCM control mmap data. His analysis is correct, and this caused the misplacements of PCM control data on 32bit arch and 32bit compat mode. The bug is that the __pad2 definition in __snd_pcm_mmap_control64 struct was wrongly with __pad_before_uframe, which should have been __pad_after_uframe instead. This struct is used in SYNC_PTR ioctl and control mmap. Basically this bug leads to two problems: - The offset of avail_min field becomes wrong, it's placed right after appl_ptr without padding on little-endian - When appl_ptr and avail_min are read as 64bit values in kernel side, the values become either zero or corrupted (mixed up) One good news is that, because both user-space and kernel misunderstand the wrong offset, at least, 32bit application running on 32bit kernel works as is. Also, 64bit applications are unaffected because the padding size is zero. The remaining problem is the 32bit compat mode; as mentioned in the above, avail_min is placed right after appl_ptr on little-endian archs, 64bit kernel reads bogus values for appl_ptr updates, which may lead to streaming bugs like jumping, XRUN or whatever unexpected. (However, we haven't heard any serious bug reports due to this over years, so practically seen, it's fairly safe to assume that the impact by this bug is limited.) Ideally speaking, we should correct the wrong mmap status control definition. But this would cause again incompatibility with the existing binaries, and fixing it (e.g. by renumbering ioctls) would be really messy. So, as of this patch, we only correct the behavior of 32bit compat mode and keep the rest as is. Namely, the SYNC_PTR ioctl is now handled differently in compat mode to read/write the 32bit values at the right offsets. The control mmap of 32bit apps on 64bit kernels has been already disabled (which is likely rather an overlook, but this worked fine at this time :), so covering SYNC_PTR ioctl should suffice as a fallback. Fixes: 80fe7430c708 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control") Reported-by: Michael Forney <mforney@mforney.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: <stable@vger.kernel.org> Cc: Rich Felker <dalias@libc.org> Link: https://lore.kernel.org/r/29QBMJU8DE71E.2YZSH8IHT5HMH@mforney.org Link: https://lore.kernel.org/r/20211010075546.23220-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20ALSA: usb-audio: Add quirk for VF0770Jonas Hahnfeld
commit 48827e1d6af58f219e89c7ec08dccbca28c7694e upstream. The device advertises 8 formats, but only a rate of 48kHz is honored by the hardware and 24 bits give chopped audio, so only report the one working combination. This fixes out-of-the-box audio experience with PipeWire which otherwise attempts to choose S24_3LE (while PulseAudio defaulted to S16_LE). Signed-off-by: Jonas Hahnfeld <hahnjo@hahnjo.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211012200906.3492-1-hahnjo@hahnjo.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-17Linux 5.10.74v5.10.74Greg Kroah-Hartman
Link: https://lore.kernel.org/r/20211014145207.979449962@linuxfoundation.org Tested-by: Fox Chen <foxhlchen@gmail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Hulk Robot <hulkrobot@huawei.com> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-17hwmon: (pmbus/ibm-cffps) max_power_out swap changesBrandon Wyman
[ Upstream commit f067d5585cda2de1e47dde914a8a4f151659e0ad ] The bytes for max_power_out from the ibm-cffps devices differ in byte order for some power supplies. The Witherspoon power supply returns the bytes in MSB/LSB order. The Rainier power supply returns the bytes in LSB/MSB order. The Witherspoon power supply uses version cffps1. The Rainier power supply should use version cffps2. If version is cffps1, swap the bytes before output to max_power_out. Tested: Witherspoon before: 3148. Witherspoon after: 3148. Rainier before: 53255. Rainier after: 2000. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210928205051.1222815-1-bjwyman@gmail.com [groeck: Replaced yoda programming] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-17sched: Always inline is_percpu_thread()Peter Zijlstra
[ Upstream commit 83d40a61046f73103b4e5d8f1310261487ff63b0 ] vmlinux.o: warning: objtool: check_preemption_disabled()+0x81: call to is_percpu_thread() leaves .noinstr.text section Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210928084218.063371959@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 13:11:18 +0000