summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-08-21vfio: Simplify the lifetime logic for vfio_deviceJason Gunthorpe
[ Upstream commit 5e42c999445bd0ae86e35affeb3e7c473d74a893 ] The vfio_device is using a 'sleep until all refs go to zero' pattern for its lifetime, but it is indirectly coded by repeatedly scanning the group list waiting for the device to be removed on its own. Switch this around to be a direct representation, use a refcount to count the number of places that are blocking destruction and sleep directly on a completion until that counter goes to zero. kfree the device after other accesses have been excluded in vfio_del_group_dev(). This is a fairly common Linux idiom. Due to this we can now remove kref_put_mutex(), which is very rarely used in the kernel. Here it is being used to prevent a zero ref device from being seen in the group list. Instead allow the zero ref device to continue to exist in the device_list and use refcount_inc_not_zero() to exclude it once refs go to zero. This patch is organized so the next patch will be able to alter the API to allow drivers to provide the kfree. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Message-Id: <2-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21vfio: Remove extra put/gets around vfio_device->groupJason Gunthorpe
[ Upstream commit e572bfb2b6a83b05acd30c03010e661b1967960f ] The vfio_device->group value has a get obtained during vfio_add_group_dev() which gets moved from the stack to vfio_device->group in vfio_group_create_device(). The reference remains until we reach the end of vfio_del_group_dev() when it is put back. Thus anything that already has a kref on the vfio_device is guaranteed a valid group pointer. Remove all the extra reference traffic. It is tricky to see, but the get at the start of vfio_del_group_dev() is actually pairing with the put hidden inside vfio_device_put() a few lines below. A later patch merges vfio_group_create_device() into vfio_add_group_dev() which makes the ownership and error flow on the create side easier to follow. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Message-Id: <1-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21remoteproc: qcom: wcnss: Fix handling of IRQsSireesh Kodali
[ Upstream commit bed0adac1ded4cb486ba19a3a7e730fbd9a1c9c6 ] The wcnss_get_irq function is expected to return a value > 0 in the event that an IRQ is succssfully obtained, but it instead returns 0. This causes the stop and ready IRQs to never actually be used despite being defined in the device-tree. This patch fixes that. Fixes: aed361adca9f ("remoteproc: qcom: Introduce WCNSS peripheral image loader") Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220526141740.15834-2-sireeshkodali1@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21ASoC: qcom: Fix missing of_node_put() in asoc_qcom_lpass_cpu_platform_probe()Liang He
[ Upstream commit f507c0c67dac57d2bcd5dcae4b6139b0305d8957 ] We should call of_node_put() for the reference 'dsp_of_node' returned by of_parse_phandle() which will increase the refcount. Fixes: 9bae4880acee ("ASoC: qcom: move ipq806x specific bits out of lpass driver.") Co-authored-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220702020109.263980-1-windhl@126.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21tty: n_gsm: fix race condition in gsmld_write()Daniel Starke
[ Upstream commit 32dd59f96924f45e33bc79854f7a00679c0fa28e ] The function may be used by the user directly and also by the n_gsm internal functions. They can lead into a race condition which results in interleaved frames if both are writing at the same time. The receiving side is not able to decode those interleaved frames correctly. Add a lock around the low side tty write to avoid race conditions and frame interleaving between user originated writes and n_gsm writes. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-9-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21tty: n_gsm: fix packet re-transmission without open control channelDaniel Starke
[ Upstream commit 4fae831b3a71fc5a44cc5c7d0b8c1267ee7659f5 ] In the current implementation control packets are re-transmitted even if the control channel closed down during T2. This is wrong. Check whether the control channel is open before re-transmitting any packets. Note that control channel open/close is handled by T1 and not T2 and remains unaffected by this. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-7-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21tty: n_gsm: fix non flow control frames during mux flow offDaniel Starke
[ Upstream commit bec0224816d19abe4fe503586d16d51890540615 ] n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.6.3.6 states that FCoff stops the transmission on all channels except the control channel. This is already implemented in gsm_data_kick(). However, chapter 5.4.8.1 explains that this shall result in the same behavior as software flow control on the ldisc in advanced option mode. That means only flow control frames shall be sent during flow off. The current implementation does not consider this case. Change gsm_data_kick() to send only flow control frames if constipated to abide the standard. gsm_read_ea_val() and gsm_is_flow_ctrl_msg() are introduced as helper functions for this. It is planned to use gsm_read_ea_val() in later code cleanups for other functions, too. Fixes: c01af4fec2c8 ("n_gsm : Flow control handling in Mux driver") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-5-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21tty: n_gsm: fix wrong queuing behavior in gsm_dlci_data_output()Daniel Starke
[ Upstream commit 556fc8ac06513cced381588d6d58c184d95cc4fe ] 1) The function drains the fifo for the given user tty/DLCI without considering 'TX_THRESH_HI' and different to gsm_dlci_data_output_framed(), which moves only one packet from the user side to the internal transmission queue. We can only handle one packet at a time here if we want to allow DLCI priority handling in gsm_dlci_data_sweep() to avoid link starvation. 2) Furthermore, the additional header octet from convergence layer type 2 is not counted against MTU. It is part of the UI/UIH frame message which needs to be limited to MTU. Hence, it is wrong not to consider this octet. 3) Finally, the waiting user tty is not informed about freed space in its send queue. Take at most one packet worth of data out of the DLCI fifo to fix 1). Limit the max user data size per packet to MTU - 1 in case of convergence layer type 2 to leave space for the control signal octet which is added in the later part of the function. This fixes 2). Add tty_port_tty_wakeup() to wake up the user tty if new write space has been made available to fix 3). Fixes: 268e526b935e ("tty/n_gsm: avoid fifo overflow in gsm_dlci_data_output") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-3-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21tty: n_gsm: fix user open not possible at responder until initiator openDaniel Starke
[ Upstream commit ac77f0077c3265197d378158c85a55eee6d21508 ] After setting up the control channel on both sides the responder side may want to open a virtual tty to listen on until the initiator starts an application on a user channel. The current implementation allows the open() but no other operation, like termios. These fail with EINVAL. The responder sided application has no means to detect an open by the initiator sided application this way. And the initiator sided applications usually expect the responder sided application to listen on the user channel upon open. Set the user channel into half-open state on responder side once a user application opens the virtual tty to allow IO operations on it. Furthermore, keep the user channel constipated until the initiator side opens it to give the responder sided application the chance to detect the new connection and to avoid data loss if the responder sided application starts sending before the user channel is open. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Daniel Starke <daniel.starke@siemens.com> Link: https://lore.kernel.org/r/20220701061652.39604-1-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21tty: n_gsm: Delete gsmtty open SABM frame when config requesterZhenguo Zhao
[ Upstream commit cbff2b32516881bef30bbebf413d1b49495bab1d ] When n_gsm config "initiator=0",as requester ,it doesn't need to send SABM frame data during gsmtty open. Example,when gsmtty open,it will send SABM frame.for initiator,it maybe not want to receive the frame. [ 88.410426] c1 gsmld_output: 00000000: f9 07 3f 01 de f9 [ 88.420839] c1 --> 1) R: SABM(F) Signed-off-by: Zhenguo Zhao <Zhenguo.Zhao1@unisoc.com> Link: https://lore.kernel.org/r/1629461872-26965-6-git-send-email-zhenguo6858@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21ASoC: samsung: change gpiod_speaker_power and rx1950_audio from global to ↵Tom Rix
static variables [ Upstream commit d2294461b90e0c5b3bbfaaf2c8baff4fd3e2bb13 ] sparse reports sound/soc/samsung/rx1950_uda1380.c:131:18: warning: symbol 'gpiod_speaker_power' was not declared. Should it be static? sound/soc/samsung/rx1950_uda1380.c:231:24: warning: symbol 'rx1950_audio' was not declared. Should it be static? Both gpiod_speaker_power and rx1950_audio are only used in rx1950_uda1380.c, so their storage class specifiers should be static. Fixes: 83d74e354200 ("ASoC: samsung: rx1950: turn into platform driver") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220629185345.910406-1-trix@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21powerpc/perf: Optimize clearing the pending PMI and remove WARN_ON for PMI ↵Athira Rajeev
check in power_pmu_disable [ Upstream commit 890005a7d98f7452cfe86dcfb2aeeb7df01132ce ] commit 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") added a new function "pmi_irq_pending" in hw_irq.h. This function is to check if there is a PMI marked as pending in Paca (PACA_IRQ_PMI).This is used in power_pmu_disable in a WARN_ON. The intention here is to provide a warning if there is PMI pending, but no counter is found overflown. During some of the perf runs, below warning is hit: WARNING: CPU: 36 PID: 0 at arch/powerpc/perf/core-book3s.c:1332 power_pmu_disable+0x25c/0x2c0 Modules linked in: ----- NIP [c000000000141c3c] power_pmu_disable+0x25c/0x2c0 LR [c000000000141c8c] power_pmu_disable+0x2ac/0x2c0 Call Trace: [c000000baffcfb90] [c000000000141c8c] power_pmu_disable+0x2ac/0x2c0 (unreliable) [c000000baffcfc10] [c0000000003e2f8c] perf_pmu_disable+0x4c/0x60 [c000000baffcfc30] [c0000000003e3344] group_sched_out.part.124+0x44/0x100 [c000000baffcfc80] [c0000000003e353c] __perf_event_disable+0x13c/0x240 [c000000baffcfcd0] [c0000000003dd334] event_function+0xc4/0x140 [c000000baffcfd20] [c0000000003d855c] remote_function+0x7c/0xa0 [c000000baffcfd50] [c00000000026c394] flush_smp_call_function_queue+0xd4/0x300 [c000000baffcfde0] [c000000000065b24] smp_ipi_demux_relaxed+0xa4/0x100 [c000000baffcfe20] [c0000000000cb2b0] xive_muxed_ipi_action+0x20/0x40 [c000000baffcfe40] [c000000000207c3c] __handle_irq_event_percpu+0x8c/0x250 [c000000baffcfee0] [c000000000207e2c] handle_irq_event_percpu+0x2c/0xa0 [c000000baffcff10] [c000000000210a04] handle_percpu_irq+0x84/0xc0 [c000000baffcff40] [c000000000205f14] generic_handle_irq+0x54/0x80 [c000000baffcff60] [c000000000015740] __do_irq+0x90/0x1d0 [c000000baffcff90] [c000000000016990] __do_IRQ+0xc0/0x140 [c0000009732f3940] [c000000bafceaca8] 0xc000000bafceaca8 [c0000009732f39d0] [c000000000016b78] do_IRQ+0x168/0x1c0 [c0000009732f3a00] [c0000000000090c8] hardware_interrupt_common_virt+0x218/0x220 This means that there is no PMC overflown among the active events in the PMU, but there is a PMU pending in Paca. The function "any_pmc_overflown" checks the PMCs on active events in cpuhw->n_events. Code snippet: <<>> if (any_pmc_overflown(cpuhw)) clear_pmi_irq_pending(); else WARN_ON(pmi_irq_pending()); <<>> Here the PMC overflown is not from active event. Example: When we do perf record, default cycles and instructions will be running on PMC6 and PMC5 respectively. It could happen that overflowed event is currently not active and pending PMI is for the inactive event. Debug logs from trace_printk: <<>> any_pmc_overflown: idx is 5: pmc value is 0xd9a power_pmu_disable: PMC1: 0x0, PMC2: 0x0, PMC3: 0x0, PMC4: 0x0, PMC5: 0xd9a, PMC6: 0x80002011 <<>> Here active PMC (from idx) is PMC5 , but overflown PMC is PMC6(0x80002011). When we handle PMI interrupt for such cases, if the PMC overflown is from inactive event, it will be ignored. Reference commit: commit bc09c219b2e6 ("powerpc/perf: Fix finding overflowed PMC in interrupt") Patch addresses two changes: 1) Fix 1 : Removal of warning ( WARN_ON(pmi_irq_pending()); ) We were printing warning if no PMC is found overflown among active PMU events, but PMI pending in PACA. But this could happen in cases where PMC overflown is not in active PMC. An inactive event could have caused the overflow. Hence the warning is not needed. To know pending PMI is from an inactive event, we need to loop through all PMC's which will cause more SPR reads via mfspr and increase in context switch. Also in existing function: perf_event_interrupt, already we ignore PMI's overflown when it is from an inactive PMC. 2) Fix 2: optimization in clearing pending PMI. Currently we check for any active PMC overflown before clearing PMI pending in Paca. This is causing additional SPR read also. From point 1, we know that if PMI pending in Paca from inactive cases, that is going to be ignored during replay. Hence if there is pending PMI in Paca, just clear it irrespective of PMC overflown or not. In summary, remove the any_pmc_overflown check entirely in power_pmu_disable. ie If there is a pending PMI in Paca, clear it, since we are in pmu_disable. There could be cases where PMI is pending because of inactive PMC ( which later when replayed also will get ignored ), so WARN_ON could give false warning. Hence removing it. Fixes: 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220522142256.24699-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21ASoC: samsung: h1940_uda1380: include proepr GPIO consumer headerKrzysztof Kozlowski
[ Upstream commit bd10b0dafdcf0ec1677cad70101e1f97b9e28f2e ] h1940_uda1380 uses gpiod*/GPIOD* so it should include GPIO consumer header. Fixes: 9666e27f90b9 ("ASoC: samsung: h1940: turn into platform driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220627141900.470469-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21profiling: fix shift too large makes kernel panicChen Zhongjin
[ Upstream commit 0fe6ee8f123a4dfb529a5aff07536bb481f34043 ] 2d186afd04d6 ("profiling: fix shift-out-of-bounds bugs") limits shift value by [0, BITS_PER_LONG -1], which means [0, 63]. However, syzbot found that the max shift value should be the bit number of (_etext - _stext). If shift is outside of this, the "buffer_bytes" will be zero and will cause kzalloc(0). Then the kernel panics due to dereferencing the returned pointer 16. This can be easily reproduced by passing a large number like 60 to enable profiling and then run readprofile. LOGS: BUG: kernel NULL pointer dereference, address: 0000000000000010 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 6148067 P4D 6148067 PUD 6142067 PMD 0 PREEMPT SMP CPU: 4 PID: 184 Comm: readprofile Not tainted 5.18.0+ #162 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_profile+0x104/0x220 RSP: 0018:ffffc900006fbe80 EFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff888006150000 RSI: 0000000000000001 RDI: ffffffff82aba4a0 RBP: 000000000188bb60 R08: 0000000000000010 R09: ffff888006151000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82aba4a0 R13: 0000000000000000 R14: ffffc900006fbf08 R15: 0000000000020c30 FS: 000000000188a8c0(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000000006144000 CR4: 00000000000006e0 Call Trace: <TASK> proc_reg_read+0x56/0x70 vfs_read+0x9a/0x1b0 ksys_read+0xa1/0xe0 ? fpregs_assert_state_consistent+0x1e/0x40 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x4d4b4e RSP: 002b:00007ffebb668d58 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 000000000188a8a0 RCX: 00000000004d4b4e RDX: 0000000000000400 RSI: 000000000188bb60 RDI: 0000000000000003 RBP: 0000000000000003 R08: 000000000000006e R09: 0000000000000000 R10: 0000000000000041 R11: 0000000000000246 R12: 000000000188bb60 R13: 0000000000000400 R14: 0000000000000000 R15: 000000000188bb60 </TASK> Modules linked in: CR2: 0000000000000010 Killed ---[ end trace 0000000000000000 ]--- Check prof_len in profile_init() to prevent it be zero. Link: https://lkml.kernel.org/r/20220531012854.229439-1-chenzhongjin@huawei.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21selftests/livepatch: better synchronize test_klp_callbacks_busyJoe Lawrence
[ Upstream commit 55eb9a6c8bf3e2099863118ef53e02d9f44f85a8 ] The test_klp_callbacks_busy module conditionally blocks a future livepatch transition by busy waiting inside its workqueue function, busymod_work_func(). After scheduling this work, a test livepatch is loaded, introducing the transition under test. Both events are marked in the kernel log for later verification, but there is no synchronization to ensure that busymod_work_func() logs its function entry message before subsequent selftest commands log their own messages. This can lead to a rare test failure due to unexpected ordering like: # --- expected # +++ result # @@ -1,7 +1,7 @@ # % modprobe test_klp_callbacks_busy block_transition=Y # test_klp_callbacks_busy: test_klp_callbacks_busy_init # -test_klp_callbacks_busy: busymod_work_func enter # % modprobe test_klp_callbacks_demo # +test_klp_callbacks_busy: busymod_work_func enter # livepatch: enabling patch 'test_klp_callbacks_demo' # livepatch: 'test_klp_callbacks_demo': initializing patching transition # test_klp_callbacks_demo: pre_patch_callback: vmlinux Force the module init function to wait until busymod_work_func() has started (and logged its message), before exiting to the next selftest steps. Fixes: 547840bd5ae5 ("selftests/livepatch: simplify test-klp-callbacks busy target tests") Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220602203233.979681-1-joe.lawrence@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21remoteproc: k3-r5: Fix refcount leak in k3_r5_cluster_of_initMiaoqian Lin
[ Upstream commit fa220c05d282e7479abe08b54e3bdffd06c25e97 ] Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node. When breaking early from a for_each_available_child_of_node() loop, we need to explicitly call of_node_put() on the child node. Add missing of_node_put() to avoid refcount leak. Fixes: 6dedbd1d5443 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Acked-by: Suman Anna <s-anna@ti.com> Link: https://lore.kernel.org/r/20220605083334.23942-1-linmq006@gmail.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21rpmsg: mtk_rpmsg: Fix circular locking dependencyAngeloGioacchino Del Regno
[ Upstream commit 353d9214682e65c55cdffad8c82139a3321c5f13 ] During execution of the worker that's used to register rpmsg devices we are safely locking the channels mutex but, when creating a new endpoint for such devices, we are registering a IPI on the SCP, which then makes the SCP to trigger an interrupt, lock its own mutex and in turn register more subdevices. This creates a circular locking dependency situation, as the mtk_rpmsg channels_lock will then depend on the SCP IPI lock. [ 15.447736] ====================================================== [ 15.460158] WARNING: possible circular locking dependency detected [ 15.460161] 5.17.0-next-20220324+ #399 Not tainted [ 15.460165] ------------------------------------------------------ [ 15.460166] kworker/0:3/155 is trying to acquire lock: [ 15.460170] ffff5b4d0eaf1308 (&scp->ipi_desc[i].lock){+.+.}-{4:4}, at: scp_ipi_lock+0x34/0x50 [mtk_scp_ipi] [ 15.504958] [] but task is already holding lock: [ 15.504960] ffff5b4d0e8f1918 (&mtk_subdev->channels_lock){+.+.}-{4:4}, at: mtk_register_device_work_function+0x50/0x1cc [mtk_rpmsg] [ 15.504978] [] which lock already depends on the new lock. [ 15.504980] [] the existing dependency chain (in reverse order) is: [ 15.504982] [] -> #1 (&mtk_subdev->channels_lock){+.+.}-{4:4}: [ 15.504990] lock_acquire+0x68/0x84 [ 15.504999] __mutex_lock+0xa4/0x3e0 [ 15.505007] mutex_lock_nested+0x40/0x70 [ 15.505012] mtk_rpmsg_ns_cb+0xe4/0x134 [mtk_rpmsg] [ 15.641684] mtk_rpmsg_ipi_handler+0x38/0x64 [mtk_rpmsg] [ 15.641693] scp_ipi_handler+0xbc/0x180 [mtk_scp] [ 15.663905] mt8192_scp_irq_handler+0x44/0xa4 [mtk_scp] [ 15.663915] scp_irq_handler+0x6c/0xa0 [mtk_scp] [ 15.685779] irq_thread_fn+0x34/0xa0 [ 15.685785] irq_thread+0x18c/0x240 [ 15.685789] kthread+0x104/0x110 [ 15.709579] ret_from_fork+0x10/0x20 [ 15.709586] [] -> #0 (&scp->ipi_desc[i].lock){+.+.}-{4:4}: [ 15.731271] __lock_acquire+0x11e4/0x1910 [ 15.740367] lock_acquire.part.0+0xd8/0x220 [ 15.749813] lock_acquire+0x68/0x84 [ 15.757861] __mutex_lock+0xa4/0x3e0 [ 15.766084] mutex_lock_nested+0x40/0x70 [ 15.775006] scp_ipi_lock+0x34/0x50 [mtk_scp_ipi] [ 15.785503] scp_ipi_register+0x40/0xa4 [mtk_scp_ipi] [ 15.796697] scp_register_ipi+0x1c/0x30 [mtk_scp] [ 15.807194] mtk_rpmsg_create_ept+0xa0/0x108 [mtk_rpmsg] [ 15.818912] rpmsg_create_ept+0x44/0x60 [ 15.827660] cros_ec_rpmsg_probe+0x15c/0x1f0 [ 15.837282] rpmsg_dev_probe+0x128/0x1d0 [ 15.846203] really_probe.part.0+0xa4/0x2a0 [ 15.855649] __driver_probe_device+0xa0/0x150 [ 15.865443] driver_probe_device+0x48/0x150 [ 15.877157] __device_attach_driver+0xc0/0x12c [ 15.889359] bus_for_each_drv+0x80/0xe0 [ 15.900330] __device_attach+0xe4/0x190 [ 15.911303] device_initial_probe+0x1c/0x2c [ 15.922969] bus_probe_device+0xa8/0xb0 [ 15.933927] device_add+0x3a8/0x8a0 [ 15.944193] device_register+0x28/0x40 [ 15.954970] rpmsg_register_device+0x5c/0xa0 [ 15.966782] mtk_register_device_work_function+0x148/0x1cc [mtk_rpmsg] [ 15.983146] process_one_work+0x294/0x664 [ 15.994458] worker_thread+0x7c/0x45c [ 16.005069] kthread+0x104/0x110 [ 16.014789] ret_from_fork+0x10/0x20 [ 16.025201] [] other info that might help us debug this: [ 16.047769] Possible unsafe locking scenario: [ 16.063942] CPU0 CPU1 [ 16.075166] ---- ---- [ 16.086376] lock(&mtk_subdev->channels_lock); [ 16.097592] lock(&scp->ipi_desc[i].lock); [ 16.113188] lock(&mtk_subdev->channels_lock); [ 16.129482] lock(&scp->ipi_desc[i].lock); [ 16.140020] [] *** DEADLOCK *** [ 16.158282] 4 locks held by kworker/0:3/155: [ 16.168978] #0: ffff5b4d00008748 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1fc/0x664 [ 16.190017] #1: ffff80000953bdc8 ((work_completion)(&mtk_subdev->register_work)){+.+.}-{0:0}, at: process_one_work+0x1fc/0x664 [ 16.215269] #2: ffff5b4d0e8f1918 (&mtk_subdev->channels_lock){+.+.}-{4:4}, at: mtk_register_device_work_function+0x50/0x1cc [mtk_rpmsg] [ 16.242131] #3: ffff5b4d05964190 (&dev->mutex){....}-{4:4}, at: __device_attach+0x44/0x190 To solve this, simply unlock the channels_lock mutex before calling mtk_rpmsg_register_device() and relock it right after, as safety is still ensured by the locking mechanism that happens right after through SCP. Fixes: 7017996951fd ("rpmsg: add rpmsg support for mt8183 SCP.") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220525091201.14210-1-angelogioacchino.delregno@collabora.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21ASoC: codecs: wcd9335: move gains from SX_TLV to S8_TLVSrinivas Kandagatla
[ Upstream commit 2fbe0953732e06b471cdedbf6f615b84235580d8 ] move all the digital gains form using SX_TLV to S8_TLV, these gains are actually 8 bit gains with 7th signed bit and ranges from -84dB to +40dB rest of the Qualcomm wcd codecs uses these properly. Fixes: 8c4f021d806a ("ASoC: wcd9335: add basic controls") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220609111901.318047-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21ASoC: codecs: msm8916-wcd-digital: move gains from SX_TLV to S8_TLVSrinivas Kandagatla
[ Upstream commit 5babb012c847beb6c8c7108fd78f650b7a2c6054 ] move all the digital gains form using SX_TLV to S8_TLV, these gains are actually 8 bit gains with 7th signed bit and ranges from -84dB to +40dB rest of the Qualcomm wcd codecs uses these properly. Fixes: ef8a4757a6db ("ASoC: msm8916-wcd-digital: Add sidetone support") Fixes: 150db8c5afa1 ("ASoC: codecs: Add msm8916-wcd digital codec") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220609111901.318047-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21serial: 8250_dw: Store LSR into lsr_saved_flags in dw8250_tx_wait_empty()Ilpo Järvinen
[ Upstream commit af14f3007e2dca0d112f10f6717ba43093f74e81 ] Make sure LSR flags are preserved in dw8250_tx_wait_empty(). This function is called from a low-level out function and therefore cannot call serial_lsr_in() as it would lead to infinite recursion. It is borderline if the flags need to be saved here at all since this code relates to writing LCR register which usually implies no important characters should be arriving. Fixes: 914eaf935ec7 ("serial: 8250_dw: Allow TX FIFO to drain before writing to UART_LCR") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220608095431.18376-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21serial: 8250: Export ICR access helpers for internal useMaciej W. Rozycki
[ Upstream commit cb5a40e3143bc64437858b337273fd63cc42e9c2 ] Make ICR access helpers available outside 8250_port.c, however retain them as ordinary static functions so as not to regress code generation. This is because `serial_icr_write' is currently automatically inlined by GCC, however `serial_icr_read' is not. Making them both static inline would grow code produced, e.g.: $ i386-linux-gnu-size --format=gnu 8250_port-{old,new}.o text data bss total filename 15065 3378 0 18443 8250_port-old.o 15289 3378 0 18667 8250_port-new.o and: $ riscv64-linux-gnu-size --format=gnu 8250_port-{old,new}.o text data bss total filename 16980 5306 0 22286 8250_port-old.o 17124 5306 0 22430 8250_port-new.o while making them external would needlessly add a new module interface and lose the benefit from `serial_icr_write' getting inlined outside 8250_port.o. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181517500.9383@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21ASoC: mediatek: mt8173-rt5650: Fix refcount leak in mt8173_rt5650_dev_probeMiaoqian Lin
[ Upstream commit efe2178d1a32492f99e7f1f2568eea5c88a85729 ] of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Fix refcount leak in some error paths. Fixes: 0f83f9296d5c ("ASoC: mediatek: Add machine driver for ALC5650 codec") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220603124243.31358-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21ASoC: codecs: da7210: add check for i2c_add_driverJiasheng Jiang
[ Upstream commit 82fa8f581a954ddeec1602bed9f8b4a09d100e6e ] As i2c_add_driver could return error if fails, it should be better to check the return value. However, if the CONFIG_I2C and CONFIG_SPI_MASTER are both true, the return value of i2c_add_driver will be covered by spi_register_driver. Therefore, it is necessary to add check and return error if fails. Fixes: aa0e25caafb7 ("ASoC: da7210: Add support for spi regmap") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220531094712.2376759-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21ASoC: mt6797-mt6351: Fix refcount leak in mt6797_mt6351_dev_probeMiaoqian Lin
[ Upstream commit 7472eb8d7dd12b6b9b1a4f4527719cc9c7f5965f ] of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: f0ab0bf250da ("ASoC: add mt6797-mt6351 driver and config option") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220603083417.9011-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21ASoC: mediatek: mt8173: Fix refcount leak in mt8173_rt5650_rt5676_dev_probeMiaoqian Lin
[ Upstream commit ae4f11c1ed2d67192fdf3d89db719ee439827c11 ] of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Fix missing of_node_put() in error paths. Fixes: 94319ba10eca ("ASoC: mediatek: Use platform_of_node for machine drivers") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220602034144.60159-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21ASoC: samsung: Fix error handling in aries_audio_probeMiaoqian Lin
[ Upstream commit 3e2649c5e8643bea0867bb1dd970fedadb0eb7f3 ] of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. This function is missing of_node_put(cpu) in the error path. Fix this by goto out label. of_node_put() will check NULL pointer. Fixes: 7a3a7671fa6c ("ASoC: samsung: Add driver for Aries boards") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220603130640.37624-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21ASoC: cros_ec_codec: Fix refcount leak in cros_ec_codec_platform_probeMiaoqian Lin
[ Upstream commit 0a034d93ee929a9ea89f3fa5f1d8492435b9ee6e ] of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: b6bc07d4360d ("ASoC: cros_ec_codec: support WoV") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Link: https://lore.kernel.org/r/20220603131043.38907-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21opp: Fix error check in dev_pm_opp_attach_genpd()Tang Bin
[ Upstream commit 4ea9496cbc959eb5c78f3e379199aca9ef4e386b ] dev_pm_domain_attach_by_name() may return NULL in some cases, so IS_ERR() doesn't meet the requirements. Thus fix it. Fixes: 6319aee10e53 ("opp: Attach genpds to devices from within OPP core") Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> [ Viresh: Replace ENODATA with ENODEV ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21usb: cdns3: Don't use priv_dev uninitialized in cdns3_gadget_ep_enable()Nathan Chancellor
[ Upstream commit 78acd4ca433425e6dd4032cfc2156c60e34931f2 ] Clang warns: drivers/usb/cdns3/cdns3-gadget.c:2290:11: error: variable 'priv_dev' is uninitialized when used here [-Werror,-Wuninitialized] dev_dbg(priv_dev->dev, "usbss: invalid parameters\n"); ^~~~~~~~ include/linux/dev_printk.h:155:18: note: expanded from macro 'dev_dbg' dynamic_dev_dbg(dev, dev_fmt(fmt), ##__VA_ARGS__) ^~~ include/linux/dynamic_debug.h:167:7: note: expanded from macro 'dynamic_dev_dbg' dev, fmt, ##__VA_ARGS__) ^~~ include/linux/dynamic_debug.h:152:56: note: expanded from macro '_dynamic_func_call' __dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__) ^~~~~~~~~~~ include/linux/dynamic_debug.h:134:15: note: expanded from macro '__dynamic_func_call' func(&id, ##__VA_ARGS__); \ ^~~~~~~~~~~ drivers/usb/cdns3/cdns3-gadget.c:2278:31: note: initialize the variable 'priv_dev' to silence this warning struct cdns3_device *priv_dev; ^ = NULL 1 error generated. The priv_dev assignment was moved below the if statement to avoid potentially dereferencing ep before it was checked but priv_dev is used in the dev_dbg() call. To fix this, move the priv_dev and comp_desc assignments back to their original spot and hoist the ep check above those assignments with a call to pr_debug() instead of dev_dbg(). Fixes: c3ffc9c4ca44 ("usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()") Link: https://github.com/ClangBuiltLinux/linux/issues/1680 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21jbd2: fix assertion 'jh->b_frozen_data == NULL' failure when journal abortedZhihao Cheng
[ Upstream commit 4a734f0869f970b8a9b65062ea40b09a5da9dba8 ] Following process will fail assertion 'jh->b_frozen_data == NULL' in jbd2_journal_dirty_metadata(): jbd2_journal_commit_transaction unlink(dir/a) jh->b_transaction = trans1 jh->b_jlist = BJ_Metadata journal->j_running_transaction = NULL trans1->t_state = T_COMMIT unlink(dir/b) handle->h_trans = trans2 do_get_write_access jh->b_modified = 0 jh->b_frozen_data = frozen_buffer jh->b_next_transaction = trans2 jbd2_journal_dirty_metadata is_handle_aborted is_journal_aborted // return false --> jbd2 abort <-- while (commit_transaction->t_buffers) if (is_journal_aborted) jbd2_journal_refile_buffer __jbd2_journal_refile_buffer WRITE_ONCE(jh->b_transaction, jh->b_next_transaction) WRITE_ONCE(jh->b_next_transaction, NULL) __jbd2_journal_file_buffer(jh, BJ_Reserved) J_ASSERT_JH(jh, jh->b_frozen_data == NULL) // assertion failure ! The reproducer (See detail in [Link]) reports: ------------[ cut here ]------------ kernel BUG at fs/jbd2/transaction.c:1629! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 2 PID: 584 Comm: unlink Tainted: G W 5.19.0-rc6-00115-g4a57a8400075-dirty #697 RIP: 0010:jbd2_journal_dirty_metadata+0x3c5/0x470 RSP: 0018:ffffc90000be7ce0 EFLAGS: 00010202 Call Trace: <TASK> __ext4_handle_dirty_metadata+0xa0/0x290 ext4_handle_dirty_dirblock+0x10c/0x1d0 ext4_delete_entry+0x104/0x200 __ext4_unlink+0x22b/0x360 ext4_unlink+0x275/0x390 vfs_unlink+0x20b/0x4c0 do_unlinkat+0x42f/0x4c0 __x64_sys_unlink+0x37/0x50 do_syscall_64+0x35/0x80 After journal aborting, __jbd2_journal_refile_buffer() is executed with holding @jh->b_state_lock, we can fix it by moving 'is_handle_aborted()' into the area protected by @jh->b_state_lock. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216251 Fixes: 470decc613ab20 ("[PATCH] jbd2: initial copy of files from jbd") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Link: https://lore.kernel.org/r/20220715125152.4022726-1-chengzhihao1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21ext4: recover csum seed of tmp_inode after migrating to extentsLi Lingfeng
[ Upstream commit 07ea7a617d6b278fb7acedb5cbe1a81ce2de7d0c ] When migrating to extents, the checksum seed of temporary inode need to be replaced by inode's, otherwise the inode checksums will be incorrect when swapping the inodes data. However, the temporary inode can not match it's checksum to itself since it has lost it's own checksum seed. mkfs.ext4 -F /dev/sdc mount /dev/sdc /mnt/sdc xfs_io -fc "pwrite 4k 4k" -c "fsync" /mnt/sdc/testfile chattr -e /mnt/sdc/testfile chattr +e /mnt/sdc/testfile umount /dev/sdc fsck -fn /dev/sdc ======== ... Pass 1: Checking inodes, blocks, and sizes Inode 13 passes checks, but checksum does not match inode. Fix? no ... ======== The fix is simple, save the checksum seed of temporary inode, and recover it after migrating to extents. Fixes: e81c9302a6c3 ("ext4: set csum seed in tmp inode while migrating to extents") Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220617062515.2113438-1-lilingfeng3@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21jbd2: fix outstanding credits assert in jbd2_journal_commit_transaction()Zhang Yi
[ Upstream commit a89573ce4ad32f19f43ec669771726817e185be0 ] We catch an assert problem in jbd2_journal_commit_transaction() when doing fsstress and request falut injection tests. The problem is happened in a race condition between jbd2_journal_commit_transaction() and ext4_end_io_end(). Firstly, ext4_writepages() writeback dirty pages and start reserved handle, and then the journal was aborted due to some previous metadata IO error, jbd2_journal_abort() start to commit current running transaction, the committing procedure could be raced by ext4_end_io_end() and lead to subtract j_reserved_credits twice from commit_transaction->t_outstanding_credits, finally the t_outstanding_credits is mistakenly smaller than t_nr_buffers and trigger assert. kjournald2 kworker jbd2_journal_commit_transaction() write_unlock(&journal->j_state_lock); atomic_sub(j_reserved_credits, t_outstanding_credits); //sub once jbd2_journal_start_reserved() start_this_handle() //detect aborted journal jbd2_journal_free_reserved() //get running transaction read_lock(&journal->j_state_lock) __jbd2_journal_unreserve_handle() atomic_sub(j_reserved_credits, t_outstanding_credits); //sub again read_unlock(&journal->j_state_lock); journal->j_running_transaction = NULL; J_ASSERT(t_nr_buffers <= t_outstanding_credits) //bomb!!! Fix this issue by using journal->j_state_lock to protect the subtraction in jbd2_journal_commit_transaction(). Fixes: 96f1e0974575 ("jbd2: avoid long hold times of j_state_lock while committing a transaction") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220611130426.2013258-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21nvme: use command_id instead of req->tag in trace_nvme_complete_rq()Bean Huo
[ Upstream commit 679c54f2de672b7d79d02f8c4ad483ff6dd8ce2e ] Use command_id instead of req->tag in trace_nvme_complete_rq(), because of commit e7006de6c238 ("nvme: code command_id with a genctr for use authentication after release"), cmd->common.command_id is set to ((genctl & 0xf)< 12 | req->tag), no longer req->tag, which makes cid in trace_nvme_complete_rq and trace_nvme_setup_cmd are not the same. Fixes: e7006de6c238 ("nvme: code command_id with a genctr for use authentication after release") Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21null_blk: fix ida error handling in null_add_dev()Dan Carpenter
[ Upstream commit ee452a8d984f94fa8e894f003a52e776e4572881 ] There needs to be some error checking if ida_simple_get() fails. Also call ida_free() if there are errors later. Fixes: 94bc02e30fb8 ("nullb: use ida to manage index") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YtEhXsr6vJeoiYhd@kili Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21RDMA/rxe: Fix error unwind in rxe_create_qp()Zhu Yanjun
[ Upstream commit fd5382c5805c4bcb50fd25b7246247d3f7114733 ] In the function rxe_create_qp(), rxe_qp_from_init() is called to initialize qp, internally things like the spin locks are not setup until rxe_qp_init_req(). If an error occures before this point then the unwind will call rxe_cleanup() and eventually to rxe_qp_do_cleanup()/rxe_cleanup_task() which will oops when trying to access the uninitialized spinlock. Move the spinlock initializations earlier before any failures. Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20220731063621.298405-1-yanjun.zhu@linux.dev Reported-by: syzbot+833061116fa28df97f3b@syzkaller.appspotmail.com Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21RDMA/mlx5: Add missing check for return value in get namespace flowMaor Gottlieb
[ Upstream commit c9776457bd5eaad4ce4ecb17af8d8f3cc6957c0b ] Add missing check for return value when calling to mlx5_ib_ft_type_to_namespace, even though it can't really fail in this specific call. Fixes: 52438be44112 ("RDMA/mlx5: Allow inserting a steering rule to the FDB") Link: https://lore.kernel.org/r/7b9ceda217d9368a51dc47a46b769bad4af9ac92.1659256069.git.leonro@nvidia.com Reviewed-by: Itay Aveksis <itayav@nvidia.com> Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21selftests: kvm: set rax before vmcallAndrei Vagin
[ Upstream commit 281106f938d3daaea6f8b6723a8217a2a1ef6936 ] kvm_hypercall has to place the hypercall number in rax. Trace events show that kvm_pv_test doesn't work properly: kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0 kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0 kvm_pv_test-53132: kvm_hypercall: nr 0x0 a0 0x0 a1 0x0 a2 0x0 a3 0x0 With this change, it starts working as expected: kvm_pv_test-54285: kvm_hypercall: nr 0x5 a0 0x0 a1 0x0 a2 0x0 a3 0x0 kvm_pv_test-54285: kvm_hypercall: nr 0xa a0 0x0 a1 0x0 a2 0x0 a3 0x0 kvm_pv_test-54285: kvm_hypercall: nr 0xb a0 0x0 a1 0x0 a2 0x0 a3 0x0 Signed-off-by: Andrei Vagin <avagin@google.com> Message-Id: <20220722230241.1944655-5-avagin@google.com> Fixes: ac4a4d6de22e ("selftests: kvm: test enforcement of paravirtual cpuid features") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21mm/mmap.c: fix missing call to vm_unacct_memory in mmap_regionMiaohe Lin
[ Upstream commit 7f82f922319ede486540e8746769865b9508d2c2 ] Since the beginning, charged is set to 0 to avoid calling vm_unacct_memory twice because vm_unacct_memory will be called by above unmap_region. But since commit 4f74d2c8e827 ("vm: remove 'nr_accounted' calculations from the unmap_vmas() interfaces"), unmap_region doesn't call vm_unacct_memory anymore. So charged shouldn't be set to 0 now otherwise the calling to paired vm_unacct_memory will be missed and leads to imbalanced account. Link: https://lkml.kernel.org/r/20220618082027.43391-1-linmiaohe@huawei.com Fixes: 4f74d2c8e827 ("vm: remove 'nr_accounted' calculations from the unmap_vmas() interfaces") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21RDMA/srpt: Fix a use-after-freeBart Van Assche
[ Upstream commit b5605148e6ce36bb21020d49010b617693933128 ] Change the LIO port members inside struct srpt_port from regular members into pointers. Allocate the LIO port data structures from inside srpt_make_tport() and free these from inside srpt_make_tport(). Keep struct srpt_device as long as either an RDMA port or a LIO target port is associated with it. This patch decouples the lifetime of struct srpt_port (controlled by the RDMA core) and struct srpt_port_id (controlled by LIO). This patch fixes the following KASAN complaint: BUG: KASAN: use-after-free in srpt_enable_tpg+0x31/0x70 [ib_srpt] Read of size 8 at addr ffff888141cc34b8 by task check/5093 Call Trace: <TASK> show_stack+0x4e/0x53 dump_stack_lvl+0x51/0x66 print_address_description.constprop.0.cold+0xea/0x41e print_report.cold+0x90/0x205 kasan_report+0xb9/0xf0 __asan_load8+0x69/0x90 srpt_enable_tpg+0x31/0x70 [ib_srpt] target_fabric_tpg_base_enable_store+0xe2/0x140 [target_core_mod] configfs_write_iter+0x18b/0x210 new_sync_write+0x1f2/0x2f0 vfs_write+0x3e3/0x540 ksys_write+0xbb/0x140 __x64_sys_write+0x42/0x50 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> Link: https://lore.kernel.org/r/20220727193415.1583860-4-bvanassche@acm.org Reported-by: Li Zhijian <lizhijian@fujitsu.com> Tested-by: Li Zhijian <lizhijian@fujitsu.com> Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21RDMA/srpt: Introduce a reference count in struct srpt_deviceBart Van Assche
[ Upstream commit aa7dfbb41b5a60ab90e244d6f586b8cb5c791c3e ] This will be used to keep struct srpt_device around as long as either the RDMA port exists or a LIO target port is associated with the struct srpt_device. Link: https://lore.kernel.org/r/20220727193415.1583860-3-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21RDMA/srpt: Duplicate port name membersBart Van Assche
[ Upstream commit b03b1ae2a3125d4475452e4f19f5d3a6e910ff6e ] Prepare for decoupling the lifetimes of struct srpt_port and struct srpt_port_id by duplicating the port name into struct srpt_port. Link: https://lore.kernel.org/r/20220727193415.1583860-2-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21platform/olpc: Fix uninitialized data in debugfs writeDan Carpenter
[ Upstream commit 40ec787e1adf302c11668d4cc69838f4d584187d ] The call to: size = simple_write_to_buffer(cmdbuf, sizeof(cmdbuf), ppos, buf, size); will succeed if at least one byte is written to the "cmdbuf" buffer. The "*ppos" value controls which byte is written. Another problem is that this code does not check for errors so it's possible for the entire buffer to be uninitialized. Inintialize the struct to zero to prevent reading uninitialized stack data. Debugfs is normally only writable by root so the impact of this bug is very minimal. Fixes: 6cca83d498bd ("Platform: OLPC: move debugfs support from x86 EC driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YthIKn+TfZSZMEcM@kili Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21usb: cdns3: change place of 'priv_ep' assignment in ↵Andrey Strachuk
cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable() [ Upstream commit c3ffc9c4ca44bfe9562166793d133e1fb0630ea6 ] If 'ep' is NULL, result of ep_to_cdns3_ep(ep) is invalid pointer and its dereference with priv_ep->cdns3_dev may cause panic. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Andrey Strachuk <strochuk@ispras.ru> Link: https://lore.kernel.org/r/20220718160052.4188-1-strochuk@ispras.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21USB: serial: fix tty-port initialized commentsJohan Hovold
[ Upstream commit 688ee1d1785c1359f9040f615dd8e6054962bce2 ] Fix up the tty-port initialized comments which got truncated and obfuscated when replacing the old ASYNCB_INITIALIZED flag. Fixes: d41861ca19c9 ("tty: Replace ASYNC_INITIALIZED bit and update atomically") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21PCI: tegra194: Fix link up retry sequenceVidya Sagar
[ Upstream commit e05fd6ae77c3e2cc0dba283005d24b6d56d2b1fa ] Add the missing DLF capability offset while clearing DL_FEATURE_EXCHANGE_EN bit during link up retry. Link: https://lore.kernel.org/r/20220721142052.25971-15-vidyas@nvidia.com Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21PCI: tegra194: Fix Root Port interrupt handlingVidya Sagar
[ Upstream commit 6646e99bcec627e866bc84365af37942c72b4b76 ] As part of Root Port interrupt handling, level-0 register is read first and based on the bits set in that, corresponding level-1 registers are read for further interrupt processing. Since both these values are currently read into the same 'val' variable, checking level-0 bits the second time around is happening on the 'val' variable value of level-1 register contents instead of freshly reading the level-0 value again. Fix by using different variables to store level-0 and level-1 registers contents. Link: https://lore.kernel.org/r/20220721142052.25971-11-vidyas@nvidia.com Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21HID: alps: Declare U1_UNICORN_LEGACY supportArtem Borisov
[ Upstream commit 1117d182c5d72abd7eb8b7d5e7b8c3373181c3ab ] U1_UNICORN_LEGACY id was added to the driver, but was not declared in the device id table, making it impossible to use. Fixes: 640e403 ("HID: alps: Add AUI1657 device ID") Signed-off-by: Artem Borisov <dedsa2002@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21mmc: cavium-thunderx: Add of_node_put() when breaking out of loopLiang He
[ Upstream commit 7ee480795e41db314f2c445c65ed854a5d6e8e32 ] In thunder_mmc_probe(), we should call of_node_put() when breaking out of for_each_child_of_node() which has increased and decreased the refcount during each iteration. Fixes: 166bac38c3c5 ("mmc: cavium: Add MMC PCI driver for ThunderX SOCs") Signed-off-by: Liang He <windhl@126.com> Acked-by: Robert Richter <rric@kernel.org> Link: https://lore.kernel.org/r/20220719095216.1241601-2-windhl@126.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21mmc: cavium-octeon: Add of_node_put() when breaking out of loopLiang He
[ Upstream commit 19bbb49acf8d7a03cb83e05624363741a4c3ec6f ] In octeon_mmc_probe(), we should call of_node_put() when breaking out of for_each_child_of_node() which has increased and decreased the refcount during each iteration. Fixes: 01d95843335c ("mmc: cavium: Add MMC support for Octeon SOCs.") Signed-off-by: Liang He <windhl@126.com> Acked-by: Robert Richter <rric@kernel.org> Link: https://lore.kernel.org/r/20220719095216.1241601-1-windhl@126.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21HID: mcp2221: prevent a buffer overflow in mcp_smbus_write()Harshit Mogalapalli
[ Upstream commit 62ac2473553a00229e67bdf3cb023b62cf7f5a9a ] Smatch Warning: drivers/hid/hid-mcp2221.c:388 mcp_smbus_write() error: __memcpy() '&mcp->txbuf[5]' too small (59 vs 255) drivers/hid/hid-mcp2221.c:388 mcp_smbus_write() error: __memcpy() 'buf' too small (34 vs 255) The 'len' variable can take a value between 0-255 as it can come from data->block[0] and it is user data. So add an bound check to prevent a buffer overflow in memcpy(). Fixes: 67a95c21463d ("HID: mcp2221: add usb to i2c-smbus host bridge") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 23:41:43 +0000