| Age | Commit message (Collapse) | Author |
|---|
|
commit a7ef82aee91f26da79b981b9f5bca43b8817d3e4 upstream.
Sometimes on Dell Latitude laptops psmouse/alps driver receive invalid ALPS
protocol V3 packets with bit7 set in last byte. More often it can be
reproduced on Dell Latitude E6440 or E7440 with closed lid and pushing
cover above touchpad.
If bit7 in last packet byte is set then it is not valid ALPS packet. I was
told that ALPS devices never send these packets. It is not know yet who
send those packets, it could be Dell EC, bug in BIOS and also bug in
touchpad firmware...
With this patch alps driver does not process those invalid packets, but
instead of reporting PSMOUSE_BAD_DATA, getting into out of sync state,
getting back in sync with the next byte and spam dmesg we return
PSMOUSE_FULL_PACKET. If driver is truly out of sync we'll fail the checks
on the next byte and report PSMOUSE_BAD_DATA then.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9d720b34c0a432639252f63012e18b0507f5b432 upstream.
On some Dell Latitude laptops ALPS device or Dell EC send one invalid byte
in 6 bytes ALPS packet. In this case psmouse driver enter out of sync
state. It looks like that all other bytes in packets are valid and also
device working properly. So there is no need to do full device reset, just
need to wait for byte which match condition for first byte (start of
packet). Because ALPS packets are bigger (6 or 8 bytes) default limit is
small.
This patch increase number of invalid bytes to size of 2 ALPS packets which
psmouse driver can drop before do full reset.
Resetting ALPS devices take some time and when doing reset on some Dell
laptops touchpad, trackstick and also keyboard do not respond. So it is
better to do it only if really necessary.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4ab8f7f320f91f279c3f06a9795cfea5c972888a upstream.
5th and 6th byte of ALPS trackstick V3 protocol match condition for first
byte of PS/2 3 bytes packet. When driver enters out of sync state and ALPS
trackstick is sending data then driver match 5th, 6th and next 1st bytes as
PS/2.
It basically means if user is using trackstick when driver is in out of
sync state driver will never resync. Processing these bytes as 3 bytes PS/2
data cause total mess (random cursor movements, random clicks) and make
trackstick unusable until psmouse driver decide to do full device reset.
Lot of users reported problems with ALPS devices on Dell Latitude E6440,
E6540 and E7440 laptops. ALPS device or Dell EC for unknown reason send
some invalid ALPS PS/2 bytes which cause driver out of sync. It looks like
that i8042 and psmouse/alps driver always receive group of 6 bytes packets
so there are no missing bytes and no bytes were inserted between valid
ones.
This patch does not fix root of problem with ALPS devices found in Dell
Latitude laptops but it does not allow to process some (invalid)
subsequence of 6 bytes ALPS packets as 3 bytes PS/2 when driver is out of
sync.
So with this patch trackstick input device does not report bogus data when
also driver is out of sync, so trackstick should be usable on those
machines.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e4742b1e786ca386e88e6cfb2801e14e15e365cd upstream.
The new Lenovo T440s laptop has a different PnP ID "LEN0039", and it
needs the similar min/max quirk to make its clickpad working.
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=903748
Reported-and-tested-by: Joschi Brauchle <joschibrauchle@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 40d43c4b4cac4c2647bf07110d7b07d35f399a84 upstream.
The dm-raid superblock (struct dm_raid_superblock) is padded to 512
bytes and that size is being used to read it in from the metadata
device into one preallocated page.
Reading or writing this on a 512-byte sector device works fine but on
a 4096-byte sector device this fails.
Set the dm-raid superblock's size to the logical block size of the
metadata device, because IO at that size is guaranteed too work. Also
add a size check to avoid silent partial metadata loss in case the
superblock should ever grow past the logical block size or PAGE_SIZE.
[includes pointer math fix from Dan Carpenter]
Reported-by: "Liuhua Wang" <lwang@suse.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9b460d3699324d570a4d4161c3741431887f102f upstream.
The walk code was using a 'ro_spine' to hold it's locked btree nodes.
But this data structure is designed for the rolling lock scheme, and
as such automatically unlocks blocks that are two steps up the call
chain. This is not suitable for the simple recursive walk algorithm,
which retraces its steps.
This code is only used by the persistent array code, which in turn is
only used by dm-cache. In order to trigger it you need to have a
mapping tree that is more than 2 levels deep; which equates to 8-16
million cache blocks. For instance a 4T ssd with a very small block
size of 32k only just triggers this bug.
The fix just places the locked blocks on the stack, and stops using
the ro_spine altogether.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9d28eb12447ee08bb5d1e8bb3195cf20e1ecd1c0 upstream.
The shrinker uses gfp flags to indicate what kind of operation can the
driver wait for. If __GFP_IO flag is present, the driver can wait for
block I/O operations, if __GFP_FS flag is present, the driver can wait on
operations involving the filesystem.
dm-bufio tested for __GFP_IO. However, dm-bufio can run on a loop block
device that makes calls into the filesystem. If __GFP_IO is present and
__GFP_FS isn't, dm-bufio could still block on filesystem operations if it
runs on a loop block device.
The change from __GFP_IO to __GFP_FS supposedly fixes one observed (though
unreproducible) deadlock involving dm-bufio and loop device.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ece9c72accdc45c3a9484dacb1125ce572647288 upstream.
Priority of a merged request is computed by ioprio_best(). If one of the
requests has undefined priority (IOPRIO_CLASS_NONE) and another request
has priority from IOPRIO_CLASS_BE, the function will return the
undefined priority which is wrong. Fix the function to properly return
priority of a request with the defined priority.
Fixes: d58cdfb89ce0c6bd5f81ae931a984ef298dbda20
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2fe749f50b0bec07650ef135b29b1f55bf543869 upstream.
Switch over the msgctl, shmat, shmctl and semtimedop syscalls to use the compat
layer. The problem was found with the debian procenv package, which called
shmctl(0, SHM_INFO, &info);
in which the shmctl syscall then overwrote parts of the surrounding areas on
the stack on which the info variable was stored and thus lead to a segfault
later on.
Additionally fix the definition of struct shminfo64 to use unsigned longs like
the other architectures. This has no impact on userspace since we only have a
32bit userspace up to now.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 48379270fe6808cf4612ee094adc8da2b7a83baa upstream.
Setups that use the blk-mq I/O path can lock up if a host with a single
device that has its door locked enters EH. Make sure to only send the
command to re-lock the door to devices that actually were reset and thus
might have lost their state. Otherwise the EH code might be get blocked
on blk_get_request as all requests for non-reset devices might be in use.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Meelis Roos <meelis.roos@ut.ee>
Tested-by: Meelis Roos <meelis.roos@ut.ee>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 899d5933b2dd2720f2b20b01eaa07871aa6ad096 upstream.
When experimenting with patches to provide kprobes support for aarch64
smp machines would hang when inserting breakpoints into kernel code.
The hangs were caused by a race condition in the code called by
aarch64_insn_patch_text_sync(). The first processor in the
aarch64_insn_patch_text_cb() function would patch the code while other
processors were still entering the function and incrementing the
cpu_count field. This resulted in some processors never observing the
exit condition and exiting the function. Thus, processors in the
system hung.
The first processor to enter the patching function performs the
patching and signals that the patching is complete with an increment
of the cpu_count field. When all the processors have incremented the
cpu_count field the cpu_count will be num_cpus_online()+1 and they
will return to normal execution.
Fixes: ae16480785de arm64: introduce interfaces to hotpatch kernel and module code
Signed-off-by: William Cohen <wcohen@redhat.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8c393f9a721c30a030049a680e1bf896669bb279 upstream.
For pNFS direct writes, layout driver may dynamically allocate ds_cinfo.buckets.
So we need to take care to free them when freeing dreq.
Ideally this needs to be done inside layout driver where ds_cinfo.buckets
are allocated. But buckets are attached to dreq and reused across LD IO iterations.
So I feel it's OK to free them in the generic layer.
Signed-off-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aa1cf25887099bba68f1f3879c0d394e08b8779f upstream.
Unlike other SATA R-Car r8a7790 controllers the r8a7790 ES1 SATA R-Car
controller needs to be run with DIPM disabled.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eaca2d8e75e90a70a63a6695c9f61932609db212 upstream.
Found by the UC-KLEE tool: A user could supply less input to
firewire-cdev ioctls than write- or write/read-type ioctl handlers
expect. The handlers used data from uninitialized kernel stack then.
This could partially leak back to the user if the kernel subsequently
generated fw_cdev_event_'s (to be read from the firewire-cdev fd)
which notably would contain the _u64 closure field which many of the
ioctl argument structures contain.
The fact that the handlers would act on random garbage input is a
lesser issue since all handlers must check their input anyway.
The fix simply always null-initializes the entire ioctl argument buffer
regardless of the actual length of expected user input. That is, a
runtime overhead of memset(..., 40) is added to each firewirew-cdev
ioctl() call. [Comment from Clemens Ladisch: This part of the stack is
most likely to be already in the cache.]
Remarks:
- There was never any leak from kernel stack to the ioctl output
buffer itself. IOW, it was not possible to read kernel stack by a
read-type or write/read-type ioctl alone; the leak could at most
happen in combination with read()ing subsequent event data.
- The actual expected minimum user input of each ioctl from
include/uapi/linux/firewire-cdev.h is, in bytes:
[0x00] = 32, [0x05] = 4, [0x0a] = 16, [0x0f] = 20, [0x14] = 16,
[0x01] = 36, [0x06] = 20, [0x0b] = 4, [0x10] = 20, [0x15] = 20,
[0x02] = 20, [0x07] = 4, [0x0c] = 0, [0x11] = 0, [0x16] = 8,
[0x03] = 4, [0x08] = 24, [0x0d] = 20, [0x12] = 36, [0x17] = 12,
[0x04] = 20, [0x09] = 24, [0x0e] = 4, [0x13] = 40, [0x18] = 4.
Reported-by: David Ramos <daramos@stanford.edu>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9b0b26580a753d4d6bdd2b8b4ca9a8f3f2d39065 upstream.
While efi-entry.S mentions that efi_entry() will have relocated the
kernel image, it actually means that efi_entry will have placed a copy
of the kernel in the appropriate location, and until this is branched to
at the end of efi_entry.S, all instructions are executed from the
original image.
Thus while the flush in efi_entry.S does ensure that the copy is visible
to noncacheable accesses, it does not guarantee that this is true for
the image instructions are being executed from. This could have
disasterous effects when the MMU and caches are disabled if the image
has not been naturally evicted to the PoC.
Additionally, due to a missing dsb following the ic ialluis, the new
kernel image is not necessarily clean in the I-cache when it is branched
to, with similar potentially disasterous effects.
This patch adds additional flushing to ensure that the currently
executing stub text is flushed to the PoC and is thus visible to
noncacheable accesses. As it is placed after the instructions cache
maintenance for the new image and __flush_dcache_area already contains a
dsb, we do not need to add a separate barrier to ensure completion of
the icache maintenance.
Comments are updated to clarify the situation with regard to the two
images and the maintenance required for both.
Fixes: 3c7f255039a2ad6ee1e3890505caf0d029b22e29
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Joel Schopp <joel.schopp@amd.com>
Reviewed-by: Roy Franz <roy.franz@linaro.org>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 97fc15436b36ee3956efad83e22a557991f7d19d upstream.
ARM64 currently doesn't fix up faults on the single-byte (strb) case of
__clear_user... which means that we can cause a nasty kernel panic as an
ordinary user with any multiple PAGE_SIZE+1 read from /dev/zero.
i.e.: dd if=/dev/zero of=foo ibs=1 count=1 (or ibs=65537, etc.)
This is a pretty obscure bug in the general case since we'll only
__do_kernel_fault (since there's no extable entry for pc) if the
mmap_sem is contended. However, with CONFIG_DEBUG_VM enabled, we'll
always fault.
if (!down_read_trylock(&mm->mmap_sem)) {
if (!user_mode(regs) && !search_exception_tables(regs->pc))
goto no_context;
retry:
down_read(&mm->mmap_sem);
} else {
/*
* The above down_read_trylock() might have succeeded in
* which
* case, we'll have missed the might_sleep() from
* down_read().
*/
might_sleep();
if (!user_mode(regs) && !search_exception_tables(regs->pc))
goto no_context;
}
Fix that by adding an extable entry for the strb instruction, since it
touches user memory, similar to the other stores in __clear_user.
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Reported-by: Miloš Prchlík <mprchlik@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c822ed967cba38505713d59ed40a114386ef6c01 upstream.
Avoids normal IO racing with discard.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ad0eab9293485d1c06237e9249f6d4dfa3d93d4d upstream.
The branches of the if (i->type & ITER_BVEC) statement in
iov_iter_single_seg_count() are the wrong way around; if ITER_BVEC is
clear then we use i->bvec, when we should be using i->iov. This fixes
it.
In my case, the symptom that this caused was that a KVM guest doing
filesystem operations on a virtual disk would result in one of qemu's
threads on the host going into an infinite loop in
generic_perform_write(). The loop would hit the copied == 0 case and
call iov_iter_single_seg_count() to reduce the number of bytes to try
to process, but because of the error, iov_iter_single_seg_count()
would just return i->count and the loop made no progress and continued
forever.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 73b3a6657a88ef5348a0d69c9a8107d6f01ae862 upstream.
For PIN_OUTPUT_PULLUP and PIN_OUTPUT_PULLDOWN we must not set the
PULL_DIS bit which disables the PULLs.
PULL_ENA is a 0 and using it in an OR operation is a NOP, so don't
use it in the PIN_OUTPUT_PULLUP/DOWN macros.
Fixes: 23d9cec07c58 ("pinctrl: dra: dt-bindings: Fix pull enable/disable")
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5129ee22ce4aff7c5907d4c3d67d23f86cd6db9b upstream.
A second product has come to light which makes use of the A0 stepping
of the Armada XP SoC. A0 stepping has a hardware bug in the i2c core
meaning that hardware offload does not work, resulting in the kernel
failing to boot. The quirk detects that the kernel is running on an A0
stepping SoC and disables the use of hardware offload.
Currently the quirk is only enabled for PlatHome Openblocks AX3. The
AX3 has been produced with both A0 and B0 stepping SoCs. The second
product is the Lenovo Iomega IX4-300d. It seems likely that this
device will also swap from A0 to B0 SoC sometime during its life.
If there are two products using A0, it seems likely there are more
products with A0. Also, since the number of A0 SoCs is limited, these
products are also likely to transition to B0. Hence detecting at run
time is the safest option. So enable the quirk for all Armada XP
boards.
Tested on an AX3 with A0 stepping.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes: 930ab3d403ae: ("i2c: mv64xxx: Add I2C Transaction Generator support")
Link: https://lkml.kernel.org/r/1406395238-29758-2-git-send-email-andrew@lunn.ch
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a8ead0ecb9d4ce472f4cdab936d6f18e41e3a9ee upstream.
The 5th NAND partition should be named "NAND.u-boot-spl-os"
instead of "NAND.u-boot-spl". This is to be consistent with other
TI boards as well as u-boot.
Fixes: 91994facdd2d ("ARM: dts: am335x-evm: NAND: update MTD partition table")
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 238962ac71910d6c20162ea5230685fead1836a4 upstream.
To speed up decompression, the decompressor sets up a flat, cacheable
mapping of memory. However, when there is insufficient space to hold
the page tables for this mapping, we don't bother to enable the caches
and subsequently skip all the cache maintenance hooks.
Skipping the cache maintenance before jumping to the relocated code
allows the processor to predict the branch and populate the I-cache
with stale data before the relocation loop has completed (since a
bootloader may have SCTLR.I set, which permits normal, cacheable
instruction fetches regardless of SCTLR.M).
This patch moves the cache maintenance check into the maintenance
routines themselves, allowing the v6/v7 versions to invalidate the
I-cache regardless of the MMU state.
Reported-by: Marc Carino <marc.ceeeee@gmail.com>
Tested-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 08b964ff3c51b10aaf2e6ba639f40054c09f0f7a upstream.
The kuser helpers page is not set up on non-MMU systems, so it does
not make sense to allow CONFIG_KUSER_HELPERS to be enabled when
CONFIG_MMU=n. Allowing it to be set on !MMU results in an oops in
set_tls (used in execve and the arm_syscall trap handler):
Unhandled exception: IPSR = 00000005 LR = fffffff1
CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc1-00041-ga30465a #216
task: 8b838000 ti: 8b82a000 task.ti: 8b82a000
PC is at flush_thread+0x32/0x40
LR is at flush_thread+0x21/0x40
pc : [<8f00157a>] lr : [<8f001569>] psr: 4100000b
sp : 8b82be20 ip : 00000000 fp : 8b83c000
r10: 00000001 r9 : 88018c84 r8 : 8bb85000
r7 : 8b838000 r6 : 00000000 r5 : 8bb77400 r4 : 8b82a000
r3 : ffff0ff0 r2 : 8b82a000 r1 : 00000000 r0 : 88020354
xPSR: 4100000b
CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc1-00041-ga30465a #216
[<8f002bc1>] (unwind_backtrace) from [<8f002033>] (show_stack+0xb/0xc)
[<8f002033>] (show_stack) from [<8f00265b>] (__invalid_entry+0x4b/0x4c)
As best I can tell this issue existed for the set_tls ARM syscall
before commit fbfb872f5f41 "ARM: 8148/1: flush TLS and thumbee
register state during exec" consolidated the TLS manipulation code
into the set_tls helper function, but now that we're using it to flush
register state during execve, !MMU users encounter the oops at the
first exec.
Prevent CONFIG_MMU=n configurations from enabling
CONFIG_KUSER_HELPERS.
Fixes: fbfb872f5f41 (ARM: 8148/1: flush TLS and thumbee register state during exec)
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Reported-by: Stefan Agner <stefan@agner.ch>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1c9498425453bb65ef339a57705c5ef59fe1541d upstream.
While developing MST support I noticed I often got the wrong data
back from a transaction, in a racy fashion. I noticed the scratch
space wasn't locked against concurrent users.
Based on a patch by Alex, but I've made it a bit more obvious when
things are locked.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f0d7bfb9407fccb6499ec01c33afe43512a439a2 upstream.
Need to unlock the crtc after updating the blanking state.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0b021c5802fbe5addf6f89f5030f684adf04f7b7 upstream.
Use gart rather than vram to avoid having to deal with
the HDP cache.
Port of adfed2b0587289013f8143c54913ddfd44ac1fd3
(drm/radeon: use gart memory for DMA ring tests)
to the IB tests.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8efe82ca908400785253c8f0dfcf301e6bd93488 upstream.
The power management code calls into the display code for
certain things. If certain power management sysfs attributes
are called before the driver has finished initializing all of
the hardware we can run into problems with uninitialized
modesetting state. Add a check to make sure modesetting
init has completed to the bandwidth update callbacks to
fix this. Can be triggered by the tlp and laptop start
up scripts depending on the timing.
bugs:
https://bugzilla.kernel.org/show_bug.cgi?id=83611
https://bugs.freedesktop.org/show_bug.cgi?id=85771
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dc4edad6530a9b7b66c3d905e2bc06021a05dcad upstream.
CE ram size is 32k/0k/0k for GFX/CS0/CS1 with CIK
Ported from amdgpu driver.
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7809a61176b385ebb3299ea43c58b1bb31ffb8c0 upstream.
Ivybridge + 30" monitor prints a drm error on every modeset, since IVB
doesn't support DP3 we should even bother trying to use it.
This regression has been introduced in
commit 06ea66b6bb445043dc25a9626254d5c130093199
Author: Todd Previte <tprevite@gmail.com>
Date: Mon Jan 20 10:19:39 2014 -0700
drm/i915: Enable 5.4Ghz (HBR2) link rate for Displayport 1.2-capable
devices
Reported-by: Dave Airlie <airlied@redhat.com>
Reference: http://mid.gmane.org/1414566170-9868-1-git-send-email-airlied@gmail.com
Cc: Todd Previte <tprevite@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d6a8b72edc92471283925ceb4ba12799b67c3ff8 upstream.
Global GTT doesn't have pat_sel[2:0] so it always point to pat_sel = 000;
So the only way to avoid screen corruptions is setting PAT 0 to Uncached.
MOCS can still be used though. But if userspace is trusting PTE for
cache selection the safest thing to do is to let caches disabled.
BSpec: "For GGTT, there is NO pat_sel[2:0] from the entry,
so RTL will always use the value corresponding to pat_sel = 000"
- System agent ggtt writes (i.e. cpu gtt mmaps) already work before
this patch, i.e. the same uncached + snooping access like on gen6/7
seems to be in effect.
- So this just fixes blitter/render access. Again it looks like it's
not just uncached access, but uncached + snooping. So we can still
hold onto all our assumptions wrt cpu clflushing on LLC machines.
v2: Cleaner patch as suggested by Chris.
v3: Add Daniel's comment
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=85576
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Tested-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e1c412e75754ab7b7002f3e18a2652d999c40d4b upstream.
Never trust (your interpretation of) the VBT. Regression from
commit 6dda730e55f412a6dfb181cae6784822ba463847
Author: Jani Nikula <jani.nikula@intel.com>
Date: Tue Jun 24 18:27:40 2014 +0300
drm/i915: respect the VBT minimum backlight brightness
causing div by zero if VBT minimum brightness equals maximum brightness.
Despite my attempts I've failed in my detective work to figure out what
the root cause is. This is not the real fix, but we have to do
something.
Reported-by: Mike Auty <mike.auty@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=86551
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b8fff407a180286aa683d543d878d98d9fc57b13 upstream.
Upon receiving the last fragment, all but the first fragment
are freed, but the multicast check for statistics at the end
of the function refers to the current skb (the last fragment)
causing a use-after-free bug.
Since multicast frames cannot be fragmented and we check for
this early in the function, just modify that check to also
do the accounting to fix the issue.
Reported-by: Yosef Khyal <yosefx.khyal@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ff1e417c7c239b7abfe70aa90460a77eaafc7f83 upstream.
Due to the time it takes to process the beacon that started the CSA
process, we may be late for the switch if we try to reach exactly
beacon 0. To avoid that, use count - 1 when calculating the switch time.
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 84469a45a1bedec9918e94ab2f78c5dc0739e4a7 upstream.
If we are switching from an HT40+ to an HT40- channel (or vice-versa),
we need the secondary channel offset IE to specify what is the
post-CSA offset to be used. This applies both to beacons and to probe
responses.
In ieee80211_parse_ch_switch_ie() we were ignoring this IE from
beacons and using the *current* HT information IE instead. This was
causing us to use the same offset as before the switch.
Fix that by using the secondary channel offset IE also for beacons and
don't ever use the pre-switch offset. Additionally, remove the
"beacon" argument from ieee80211_parse_ch_switch_ie(), since it's not
needed anymore.
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 46238845bd609a5c0fbe076e1b82b4c5b33360b2 upstream.
When an interface is deleted, an ongoing hardware scan is canceled and
the driver must abort the scan, at the very least reporting completion
while the interface is removed.
However, if it scheduled the work that might only run after everything
is said and done, which leads to cfg80211 warning that the scan isn't
reported as finished yet; this is no fault of the driver, it already
did, but mac80211 hasn't processed it.
To fix this situation, flush the delayed work when the interface being
removed is the one that was executing the scan.
Reported-by: Sujith Manoharan <sujith@msujith.org>
Tested-by: Sujith Manoharan <sujith@msujith.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 805dbe17d1c832ad341f14fae8cedf41b67ca6fa upstream.
The driver is not released when ieee80211_register_hw fails in
mac80211_hwsim_create_radio, leading to the access to the unregistered (and
possibly freed) device in platform_driver_unregister:
[ 0.447547] mac80211_hwsim: ieee80211_register_hw failed (-2)
[ 0.448292] ------------[ cut here ]------------
[ 0.448854] WARNING: CPU: 0 PID: 1 at ../include/linux/kref.h:47 kobject_get+0x33/0x50()
[ 0.449839] CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-00001-gdd46990-dirty #2
[ 0.450813] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 0.451512] 00000000 00000000 78025e38 7967c6c6 78025e68 7905e09b 7988b480 00000000
[ 0.452579] 00000001 79887d62 0000002f 79170bb3 79170bb3 78397008 79ac9d74 00000001
[ 0.453614] 78025e78 7905e15d 00000009 00000000 78025e84 79170bb3 78397000 78025e8c
[ 0.454632] Call Trace:
[ 0.454921] [<7967c6c6>] dump_stack+0x16/0x18
[ 0.455453] [<7905e09b>] warn_slowpath_common+0x6b/0x90
[ 0.456067] [<79170bb3>] ? kobject_get+0x33/0x50
[ 0.456612] [<79170bb3>] ? kobject_get+0x33/0x50
[ 0.457155] [<7905e15d>] warn_slowpath_null+0x1d/0x20
[ 0.457748] [<79170bb3>] kobject_get+0x33/0x50
[ 0.458274] [<7925824f>] get_device+0xf/0x20
[ 0.458779] [<7925b5cd>] driver_detach+0x3d/0xa0
[ 0.459331] [<7925a3ff>] bus_remove_driver+0x8f/0xb0
[ 0.459927] [<7925bf80>] ? class_unregister+0x40/0x80
[ 0.460660] [<7925bad7>] driver_unregister+0x47/0x50
[ 0.461248] [<7925c033>] ? class_destroy+0x13/0x20
[ 0.461824] [<7925d07b>] platform_driver_unregister+0xb/0x10
[ 0.462507] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9
[ 0.463161] [<79b30c58>] do_one_initcall+0x106/0x1a9
[ 0.463758] [<79b517b8>] ? if_spi_init_module+0xac/0xac
[ 0.464393] [<79b517b8>] ? if_spi_init_module+0xac/0xac
[ 0.465001] [<79071935>] ? parse_args+0x2f5/0x480
[ 0.465569] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50
[ 0.466345] [<79b30dd9>] kernel_init_freeable+0xde/0x17d
[ 0.466972] [<79b304d6>] ? do_early_param+0x7a/0x7a
[ 0.467546] [<79677b1b>] kernel_init+0xb/0xe0
[ 0.468072] [<79075f42>] ? schedule_tail+0x12/0x40
[ 0.468658] [<79686580>] ret_from_kernel_thread+0x20/0x30
[ 0.469303] [<79677b10>] ? rest_init+0xc0/0xc0
[ 0.469829] ---[ end trace ad8ac403ff8aef5c ]---
[ 0.470509] ------------[ cut here ]------------
[ 0.471047] WARNING: CPU: 0 PID: 1 at ../kernel/locking/lockdep.c:3161 __lock_acquire.isra.22+0x7aa/0xb00()
[ 0.472163] DEBUG_LOCKS_WARN_ON(id >= MAX_LOCKDEP_KEYS)
[ 0.472774] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.17.0-00001-gdd46990-dirty #2
[ 0.473815] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 0.474492] 78025de0 78025de0 78025da0 7967c6c6 78025dd0 7905e09b 79888931 78025dfc
[ 0.475515] 00000001 79888a93 00000c59 7907f33a 7907f33a 78028000 fffe9d09 00000000
[ 0.476519] 78025de8 7905e10e 00000009 78025de0 79888931 78025dfc 78025e24 7907f33a
[ 0.477523] Call Trace:
[ 0.477821] [<7967c6c6>] dump_stack+0x16/0x18
[ 0.478352] [<7905e09b>] warn_slowpath_common+0x6b/0x90
[ 0.478976] [<7907f33a>] ? __lock_acquire.isra.22+0x7aa/0xb00
[ 0.479658] [<7907f33a>] ? __lock_acquire.isra.22+0x7aa/0xb00
[ 0.480417] [<7905e10e>] warn_slowpath_fmt+0x2e/0x30
[ 0.480479] [<7907f33a>] __lock_acquire.isra.22+0x7aa/0xb00
[ 0.480479] [<79078aa5>] ? sched_clock_cpu+0xb5/0xf0
[ 0.480479] [<7907fd06>] lock_acquire+0x56/0x70
[ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0
[ 0.480479] [<79682d11>] mutex_lock_nested+0x61/0x2a0
[ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0
[ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0
[ 0.480479] [<7925b5e8>] driver_detach+0x58/0xa0
[ 0.480479] [<7925a3ff>] bus_remove_driver+0x8f/0xb0
[ 0.480479] [<7925bf80>] ? class_unregister+0x40/0x80
[ 0.480479] [<7925bad7>] driver_unregister+0x47/0x50
[ 0.480479] [<7925c033>] ? class_destroy+0x13/0x20
[ 0.480479] [<7925d07b>] platform_driver_unregister+0xb/0x10
[ 0.480479] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9
[ 0.480479] [<79b30c58>] do_one_initcall+0x106/0x1a9
[ 0.480479] [<79b517b8>] ? if_spi_init_module+0xac/0xac
[ 0.480479] [<79b517b8>] ? if_spi_init_module+0xac/0xac
[ 0.480479] [<79071935>] ? parse_args+0x2f5/0x480
[ 0.480479] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50
[ 0.480479] [<79b30dd9>] kernel_init_freeable+0xde/0x17d
[ 0.480479] [<79b304d6>] ? do_early_param+0x7a/0x7a
[ 0.480479] [<79677b1b>] kernel_init+0xb/0xe0
[ 0.480479] [<79075f42>] ? schedule_tail+0x12/0x40
[ 0.480479] [<79686580>] ret_from_kernel_thread+0x20/0x30
[ 0.480479] [<79677b10>] ? rest_init+0xc0/0xc0
[ 0.480479] ---[ end trace ad8ac403ff8aef5d ]---
[ 0.495478] BUG: unable to handle kernel paging request at 00200200
[ 0.496257] IP: [<79682de5>] mutex_lock_nested+0x135/0x2a0
[ 0.496923] *pde = 00000000
[ 0.497290] Oops: 0002 [#1]
[ 0.497653] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.17.0-00001-gdd46990-dirty #2
[ 0.498659] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 0.499321] task: 78028000 ti: 78024000 task.ti: 78024000
[ 0.499955] EIP: 0060:[<79682de5>] EFLAGS: 00010097 CPU: 0
[ 0.500620] EIP is at mutex_lock_nested+0x135/0x2a0
[ 0.501145] EAX: 00200200 EBX: 78397434 ECX: 78397460 EDX: 78025e70
[ 0.501816] ESI: 00000246 EDI: 78028000 EBP: 78025e8c ESP: 78025e54
[ 0.502497] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 0.503076] CR0: 8005003b CR2: 00200200 CR3: 01b9d000 CR4: 00000690
[ 0.503773] Stack:
[ 0.503998] 00000000 00000001 00000000 7925b5e8 78397460 7925b5e8 78397474 78397460
[ 0.504944] 00200200 11111111 78025e70 78397000 79ac9d74 00000001 78025ea0 7925b5e8
[ 0.505451] 79ac9d74 fffffffe 00000001 78025ebc 7925a3ff 7a251398 78025ec8 7925bf80
[ 0.505451] Call Trace:
[ 0.505451] [<7925b5e8>] ? driver_detach+0x58/0xa0
[ 0.505451] [<7925b5e8>] ? driver_detach+0x58/0xa0
[ 0.505451] [<7925b5e8>] driver_detach+0x58/0xa0
[ 0.505451] [<7925a3ff>] bus_remove_driver+0x8f/0xb0
[ 0.505451] [<7925bf80>] ? class_unregister+0x40/0x80
[ 0.505451] [<7925bad7>] driver_unregister+0x47/0x50
[ 0.505451] [<7925c033>] ? class_destroy+0x13/0x20
[ 0.505451] [<7925d07b>] platform_driver_unregister+0xb/0x10
[ 0.505451] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9
[ 0.505451] [<79b30c58>] do_one_initcall+0x106/0x1a9
[ 0.505451] [<79b517b8>] ? if_spi_init_module+0xac/0xac
[ 0.505451] [<79b517b8>] ? if_spi_init_module+0xac/0xac
[ 0.505451] [<79071935>] ? parse_args+0x2f5/0x480
[ 0.505451] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50
[ 0.505451] [<79b30dd9>] kernel_init_freeable+0xde/0x17d
[ 0.505451] [<79b304d6>] ? do_early_param+0x7a/0x7a
[ 0.505451] [<79677b1b>] kernel_init+0xb/0xe0
[ 0.505451] [<79075f42>] ? schedule_tail+0x12/0x40
[ 0.505451] [<79686580>] ret_from_kernel_thread+0x20/0x30
[ 0.505451] [<79677b10>] ? rest_init+0xc0/0xc0
[ 0.505451] Code: 89 d8 e8 cf 9b 9f ff 8b 4f 04 8d 55 e4 89 d8 e8 72 9d 9f ff 8d 43 2c 89 c1 89 45 d8 8b 43 30 8d 55 e4 89 53 30 89 4d e4 89 45 e8 <89> 10 8b 55 dc 8b 45 e0 89 7d ec e8 db af 9f ff eb 11 90 31 c0
[ 0.505451] EIP: [<79682de5>] mutex_lock_nested+0x135/0x2a0 SS:ESP 0068:78025e54
[ 0.505451] CR2: 0000000000200200
[ 0.505451] ---[ end trace ad8ac403ff8aef5e ]---
[ 0.505451] Kernel panic - not syncing: Fatal exception
Fixes: 9ea927748ced ("mac80211_hwsim: Register and bind to driver")
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Junjie Mao <eternal.n08@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3ce9b20f1971690b8b3b620e735ec99431573b39 upstream.
When VLAN is in use in macvtap_put_user, we end up setting
csum_start to the wrong place. The result is that the whoever
ends up doing the checksum setting will corrupt the packet instead
of writing the checksum to the expected location, usually this
means writing the checksum with an offset of -4.
This patch fixes this by adjusting csum_start when VLAN tags are
detected.
Fixes: f09e2249c4f5 ("macvtap: restore vlan header on user read")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit aaef31703a0cf6a733e651885bfb49edc3ac6774 upstream.
Large (greater than 32k, the value of PAGE_ALLOC_COSTLY_ORDER) auth
tickets will have their buffers vmalloc'ed, which leads to the
following crash in crypto:
[ 28.685082] BUG: unable to handle kernel paging request at ffffeb04000032c0
[ 28.686032] IP: [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80
[ 28.686032] PGD 0
[ 28.688088] Oops: 0000 [#1] PREEMPT SMP
[ 28.688088] Modules linked in:
[ 28.688088] CPU: 0 PID: 878 Comm: kworker/0:2 Not tainted 3.17.0-vm+ #305
[ 28.688088] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[ 28.688088] Workqueue: ceph-msgr con_work
[ 28.688088] task: ffff88011a7f9030 ti: ffff8800d903c000 task.ti: ffff8800d903c000
[ 28.688088] RIP: 0010:[<ffffffff81392b42>] [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80
[ 28.688088] RSP: 0018:ffff8800d903f688 EFLAGS: 00010286
[ 28.688088] RAX: ffffeb04000032c0 RBX: ffff8800d903f718 RCX: ffffeb04000032c0
[ 28.688088] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8800d903f750
[ 28.688088] RBP: ffff8800d903f688 R08: 00000000000007de R09: ffff8800d903f880
[ 28.688088] R10: 18df467c72d6257b R11: 0000000000000000 R12: 0000000000000010
[ 28.688088] R13: ffff8800d903f750 R14: ffff8800d903f8a0 R15: 0000000000000000
[ 28.688088] FS: 00007f50a41c7700(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000
[ 28.688088] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 28.688088] CR2: ffffeb04000032c0 CR3: 00000000da3f3000 CR4: 00000000000006b0
[ 28.688088] Stack:
[ 28.688088] ffff8800d903f698 ffffffff81392ca8 ffff8800d903f6e8 ffffffff81395d32
[ 28.688088] ffff8800dac96000 ffff880000000000 ffff8800d903f980 ffff880119b7e020
[ 28.688088] ffff880119b7e010 0000000000000000 0000000000000010 0000000000000010
[ 28.688088] Call Trace:
[ 28.688088] [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40
[ 28.688088] [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40
[ 28.688088] [<ffffffff81395d32>] blkcipher_walk_done+0x182/0x220
[ 28.688088] [<ffffffff813990bf>] crypto_cbc_encrypt+0x15f/0x180
[ 28.688088] [<ffffffff81399780>] ? crypto_aes_set_key+0x30/0x30
[ 28.688088] [<ffffffff8156c40c>] ceph_aes_encrypt2+0x29c/0x2e0
[ 28.688088] [<ffffffff8156d2a3>] ceph_encrypt2+0x93/0xb0
[ 28.688088] [<ffffffff8156d7da>] ceph_x_encrypt+0x4a/0x60
[ 28.688088] [<ffffffff8155b39d>] ? ceph_buffer_new+0x5d/0xf0
[ 28.688088] [<ffffffff8156e837>] ceph_x_build_authorizer.isra.6+0x297/0x360
[ 28.688088] [<ffffffff8112089b>] ? kmem_cache_alloc_trace+0x11b/0x1c0
[ 28.688088] [<ffffffff8156b496>] ? ceph_auth_create_authorizer+0x36/0x80
[ 28.688088] [<ffffffff8156ed83>] ceph_x_create_authorizer+0x63/0xd0
[ 28.688088] [<ffffffff8156b4b4>] ceph_auth_create_authorizer+0x54/0x80
[ 28.688088] [<ffffffff8155f7c0>] get_authorizer+0x80/0xd0
[ 28.688088] [<ffffffff81555a8b>] prepare_write_connect+0x18b/0x2b0
[ 28.688088] [<ffffffff81559289>] try_read+0x1e59/0x1f10
This is because we set up crypto scatterlists as if all buffers were
kmalloc'ed. Fix it.
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2651cc6974d47fc43bef1cd8cd26966e4f5ba306 upstream.
Userspace actually passes single parameter (path name) to the umount
syscall, so new umount just fails. Fix it by requesting old umount
syscall implementation and re-wiring umount to it.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1a290581ded60e87276741f8ca97b161d2b226fc upstream.
M-audio FastTrack Ultra quirk doesn't release the kzalloc'ed memory.
This patch adds the private_free callback to release it properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3542aed7480925eb859f7ce101982209cc19a126 upstream.
Lenovo Ideapad Z560 has a mute LED that is controlled via EAPD pin
0x1b on CX20585 codec. (EAPD bit on corresponds to mute LED on.)
The machine doesn't need other EAPD, so the fixup concentrates on
controlling EAPD 0x1b following the vmaster state (but inversely).
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=665315
Reported-by: Szymon Kowalczyk <fazerxlo@o2.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 66a7cbc303f4d28f201529b06061944d51ab530c upstream.
Samsung pci-e SSDs on macbooks failed miserably on NCQ commands, so
67809f85d31e ("ahci: disable NCQ on Samsung pci-e SSDs on macbooks")
disabled NCQ on them. It turns out that NCQ is fine as long as MSI is
not used, so let's turn off MSI and leave NCQ on.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=60731
Tested-by: <dorin@i51.org>
Tested-by: Imre Kaloz <kaloz@openwrt.org>
Fixes: 67809f85d31e ("ahci: disable NCQ on Samsung pci-e SSDs on macbooks")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9a23c1d6f0f5dbac4c9b73fa6cea7c9ee3d29074 upstream.
Changes into the AHCI subsystem have introduced a bug by not taking into
account the force_port_map and mask_port_map parameters when using the
ahci_pci_save_initial_config function. This commit fixes it by setting
the internal parameters of the ahci_port_priv structure.
Fixes: 725c7b570fda
Reported-and-tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 690000b930456a98663567d35dd5c54b688d1e3f upstream.
This patch adds the AHCI-mode SATA Device IDs for the Intel Sunrise Point PCH.
Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3438cf549d2f3ee8e52c82acc8e2a9710ac21a5b upstream.
Currently if the user passes an invalid value on the kernel command line
then the kernel will crash during argument parsing. On most systems this
is very hard to debug because the console hasn't been initialized yet.
This is a regression due to commit 51e158c12aca ("param: hand arguments
after -- straight to init") which, in response to the systemd debug
controversy, made it possible to explicitly pass arguments to init. To
achieve this parse_args() was extended from simply returning an error
code to returning a pointer. Regretably the new init args logic does not
perform a proper validity check on the pointer resulting in a crash.
This patch fixes the validity check. Should the check fail then no arguments
will be passed to init. This is reasonable and matches how the kernel treats
its own arguments (i.e. no error recovery).
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e30f53aad2202b5526c40c36d8eeac8bf290bde5 upstream.
On a !PREEMPT kernel, attempting to use trace-cmd results in a soft
lockup:
# trace-cmd record -e raw_syscalls:* -F false
NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [trace-cmd:61]
...
Call Trace:
[<ffffffff8105b580>] ? __wake_up_common+0x90/0x90
[<ffffffff81092e25>] wait_on_pipe+0x35/0x40
[<ffffffff810936e3>] tracing_buffers_splice_read+0x2e3/0x3c0
[<ffffffff81093300>] ? tracing_stats_read+0x2a0/0x2a0
[<ffffffff812d10ab>] ? _raw_spin_unlock+0x2b/0x40
[<ffffffff810dc87b>] ? do_read_fault+0x21b/0x290
[<ffffffff810de56a>] ? handle_mm_fault+0x2ba/0xbd0
[<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80
[<ffffffff810951e2>] ? trace_buffer_lock_reserve+0x22/0x60
[<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80
[<ffffffff8112415d>] do_splice_to+0x6d/0x90
[<ffffffff81126971>] SyS_splice+0x7c1/0x800
[<ffffffff812d1edd>] tracesys_phase2+0xd3/0xd8
The problem is this: tracing_buffers_splice_read() calls
ring_buffer_wait() to wait for data in the ring buffers. The buffers
are not empty so ring_buffer_wait() returns immediately. But
tracing_buffers_splice_read() calls ring_buffer_read_page() with full=1,
meaning it only wants to read a full page. When the full page is not
available, tracing_buffers_splice_read() tries to wait again with
ring_buffer_wait(), which again returns immediately, and so on.
Fix this by adding a "full" argument to ring_buffer_wait() which will
make ring_buffer_wait() wait until the writer has left the reader's
page, i.e. until full-page reads will succeed.
Link: http://lkml.kernel.org/r/1415645194-25379-1-git-send-email-rabin@rab.in
Fixes: b1169cc69ba9 ("tracing: Remove mock up poll wait function")
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 799b601451b21ebe7af0e6e8f6e2ccd4683c5064 upstream.
Audit rules disappear when an inode they watch is evicted from the cache.
This is likely not what we want.
The guilty commit is "fsnotify: allow marks to not pin inodes in core",
which didn't take into account that audit_tree adds watches with a zero
mask.
Adding any mask should fix this.
Fixes: 90b1e7a57880 ("fsnotify: allow marks to not pin inodes in core")
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 897f1acbb6702ddaa953e8d8436eee3b12016c7e upstream.
Add a space between subj= and feature= fields to make them parsable.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9ef91514774a140e468f99d73d7593521e6d25dc upstream.
When an AUDIT_GET_FEATURE message is sent from userspace to the kernel, it
should reply with a message tagged as an AUDIT_GET_FEATURE type with a struct
audit_feature. The current reply is a message tagged as an AUDIT_GET
type with a struct audit_feature.
This appears to have been a cut-and-paste-eo in commit b0fed40.
Reported-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 81f49a8fd7088cfcb588d182eeede862c0e3303e upstream.
is_compat_task() is the wrong check for audit arch; the check should
be is_ia32_task(): x32 syscalls should be AUDIT_ARCH_X86_64, not
AUDIT_ARCH_I386.
CONFIG_AUDITSYSCALL is currently incompatible with x32, so this has
no visible effect.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/a0138ed8c709882aec06e4acc30bfa9b623b8717.1409954077.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
