summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-10-05iscsi-target: Fix memory corruption in iscsit_logout_post_handler_diffcidNicholas Bellinger
commit b53b0d99d6fbf7d44330395349a895521cfdbc96 upstream. This patch fixes a bug in iscsit_logout_post_handler_diffcid() where a pointer used as storage for list_for_each_entry() was incorrectly being used to determine if no matching entry had been found. This patch changes iscsit_logout_post_handler_diffcid() to key off bool conn_found to determine if the function needs to exit early. Reported-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05iscsi-target: avoid NULL pointer in iscsi_copy_param_list failureJoern Engel
commit 8ae757d09c45102b347a1bc2867f54ffc1ab8fda upstream. In iscsi_copy_param_list() a failed iscsi_param_list memory allocation currently invokes iscsi_release_param_list() to cleanup, and will promptly trigger a NULL pointer dereference. Instead, go ahead and return for the first iscsi_copy_param_list() failure case. Found by coverity. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05target: Fix inverted logic in SE_DEV_ALUA_SUPPORT_STATE_STORESebastian Herbszt
commit 1f0b030c45c781f9fe568e5e2a813d6c8567a051 upstream. Fix inverted logic in SE_DEV_ALUA_SUPPORT_STATE_STORE for setting the supported ALUA access states via configfs, originally introduced in commit b0a382c5. A value of 1 should enable the support, not disable it. Signed-off-by: Sebastian Herbszt <herbszt@gmx.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05Target/iser: Don't put isert_conn inside disconnected handlerSagi Grimberg
commit 0fc4ea701fcf5bc51ace4e288af5be741465f776 upstream. disconnected_handler is invoked on several CM events (such as DISCONNECTED, DEVICE_REMOVAL, TIMEWAIT_EXIT...). Since multiple events can occur while before isert_free_conn is invoked, we might put all isert_conn references and free the connection too early. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05Target/iser: Get isert_conn reference once got to connected_handlerSagi Grimberg
commit c2f88b17a1d97ca4ecd96cc22333a7a4f1407d39 upstream. In case the connection didn't reach connected state, disconnected handler will never be invoked thus the second kref_put on isert_conn will be missing. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05iio: adc: at91: don't use the last converted data registerLudovic Desroches
commit d4f51956ac8ad302db9b0c4e4232775b1baa7b44 upstream. If touchscreen mode is enabled and a conversion is requested on another channel, the result in the last converted data register can be a touchscreen relative value. Starting a conversion involves to do a conversion for all active channel. It starts with ADC channels and ends with touchscreen channels. Then if ADC_LCD register is not read quickly, its content may be a touchscreen conversion. To remove this temporal constraint, the conversion value is taken from the channel data register. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05iio: adc: xilinx-xadc: assign auxiliary channels address correctlySubbaraya Sundeep Bhatta
commit 1887e724e2b6df06847522fe9dc2ab53639516cc upstream. This patch fixes incorrect logic for assigning address to auxiliary channels of xilinx xadc. Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05iio:inkern: fix overwritten -EPROBE_DEFER in of_iio_channel_get_by_nameJohannes Pointner
commit 872687f626e033b4ddfaec1e410057cfc6636d77 upstream. Fixes: a2c12493ed7e ('iio: of_iio_channel_get_by_name() returns non-null pointers for error legs') which improperly assumes that of_iio_channel_get_by_name must always return NULL and thus now hides -EPROBE_DEFER. Signed-off-by: Johannes Pointner <johannes.pointner@br-automation.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05iio:magnetometer: bugfix magnetometers gain valuesDenis CIOCCA
commit a31d0928999fbf33b3a6042e8bcb7b7f7e07d094 upstream. This patch fix gains values. The first driver was designed using engineering samples, in mass production the values are changed. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05iio: adc: ad_sigma_delta: Fix indio_dev->trig assignmentSrinivas Pandruvada
commit 9e5846be33277802c0c76e5c12825d0e4d27f639 upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05iio: st_sensors: Fix indio_dev->trig assignmentSrinivas Pandruvada
commit f0e84acd7056e6d7ade551c6439531606ae30a46 upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05iio: meter: ade7758: Fix indio_dev->trig assignmentSrinivas Pandruvada
commit 0495081179212b758775df752e657ea71dcae020 upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05iio: inv_mpu6050: Fix indio_dev->trig assignmentSrinivas Pandruvada
commit b07e3b3850b2e1f09c19f54d3ed7210d9f529e2c upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05iio: gyro: itg3200: Fix indio_dev->trig assignmentSrinivas Pandruvada
commit 0b4dce2ee694a991ef38203ec5ff91a738518cb3 upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05iio: hid_sensor_hub: Fix indio_dev->trig assignmentSrinivas Pandruvada
commit 55a6f9ddfdea0d2d343cd1b39baf8aa752664b6e upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05iio: accel: bma180: Fix indio_dev->trig assignmentSrinivas Pandruvada
commit 0668a4e4d297328ce08b44d91d160537596115e2 upstream. This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05iio:trigger: modify return value for iio_trigger_getSrinivas Pandruvada
commit f153566570fb9e32c2f59182883f4f66048788fb upstream. Instead of a void function, return the trigger pointer. Whilst not in of itself a fix, this makes the following set of 7 fixes cleaner than they would otherwise be. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05SMB3: Fix oops when creating symlinks on smb3Steve French
commit da80659d4aa758dc6935b10ec64513f0b67bc969 upstream. We were not checking for symlink support properly for SMB2/SMB3 mounts so could oops when mounted with mfsymlinks when try to create symlink when mfsymlinks on smb2/smb3 mounts Signed-off-by: Steve French <smfrench@gmail.com> CC: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ASoC: davinci-mcasp: Correct rx format unit configurationPeter Ujfalusi
commit fe0a29e163a5d045c73faab682a8dac71c2f8012 upstream. In case of capture we should not use rotation. The reverse and mask is enough to get the data align correctly from the bus to MCU: Format data from bus after reverse (XRBUF) S16_LE: |LSB|MSB|xxx|xxx| |xxx|xxx|MSB|LSB| S24_3LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| S24_LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| S32_LE: |LSB|DAT|DAT|MSB| |MSB|DAT|DAT|LSB| With this patch all supported formats will work for playback and capture. Reported-by: Jyri Sarha <jsarha@ti.com> (broken S24_3LE capture) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05shmem: fix nlink for rename overwrite directoryMiklos Szeredi
commit b928095b0a7cff7fb9fcf4c706348ceb8ab2c295 upstream. If overwriting an empty directory with rename, then need to drop the extra nlink. Test prog: #include <stdio.h> #include <fcntl.h> #include <err.h> #include <sys/stat.h> int main(void) { const char *test_dir1 = "test-dir1"; const char *test_dir2 = "test-dir2"; int res; int fd; struct stat statbuf; res = mkdir(test_dir1, 0777); if (res == -1) err(1, "mkdir(\"%s\")", test_dir1); res = mkdir(test_dir2, 0777); if (res == -1) err(1, "mkdir(\"%s\")", test_dir2); fd = open(test_dir2, O_RDONLY); if (fd == -1) err(1, "open(\"%s\")", test_dir2); res = rename(test_dir1, test_dir2); if (res == -1) err(1, "rename(\"%s\", \"%s\")", test_dir1, test_dir2); res = fstat(fd, &statbuf); if (res == -1) err(1, "fstat(%i)", fd); if (statbuf.st_nlink != 0) { fprintf(stderr, "nlink is %lu, should be 0\n", statbuf.st_nlink); return 1; } return 0; } Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05x86/kaslr: Avoid the setup_data area when picking locationKees Cook
commit 0cacbfbeb5077b63d5d3cf6df88b14ac12ad584b upstream. The KASLR location-choosing logic needs to avoid the setup_data list memory areas as well. Without this, it would be possible to have the ASLR position stomp on the memory, ultimately causing the boot to fail. Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Pavel Machek <pavel@ucw.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140911161931.GA12001@www.outflux.net Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05x86 early_ioremap: Increase FIX_BTMAPS_SLOTS to 8Dave Young
commit 3eddc69ffeba092d288c386646bfa5ec0fce25fd upstream. 3.16 kernel boot fail with earlyprintk=efi, it keeps scrolling at the bottom line of screen. Bisected, the first bad commit is below: commit 86dfc6f339886559d80ee0d4bd20fe5ee90450f0 Author: Lv Zheng <lv.zheng@intel.com> Date: Fri Apr 4 12:38:57 2014 +0800 ACPICA: Tables: Fix table checksums verification before installation. I did some debugging by enabling both serial and efi earlyprintk, below is some debug dmesg, seems early_ioremap fails in scroll up function due to no free slot, see below dmesg output: WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:116 __early_ioremap+0x90/0x1c4() __early_ioremap(ed00c800, 00000c80) not found slot Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.17.0-rc1+ #204 Hardware name: Hewlett-Packard HP Z420 Workstation/1589, BIOS J61 v03.15 05/09/2013 Call Trace: dump_stack+0x4e/0x7a warn_slowpath_common+0x75/0x8e ? __early_ioremap+0x90/0x1c4 warn_slowpath_fmt+0x47/0x49 __early_ioremap+0x90/0x1c4 ? sprintf+0x46/0x48 early_ioremap+0x13/0x15 early_efi_map+0x24/0x26 early_efi_scroll_up+0x6d/0xc0 early_efi_write+0x1b0/0x214 call_console_drivers.constprop.21+0x73/0x7e console_unlock+0x151/0x3b2 ? vprintk_emit+0x49f/0x532 vprintk_emit+0x521/0x532 ? console_unlock+0x383/0x3b2 printk+0x4f/0x51 acpi_os_vprintf+0x2b/0x2d acpi_os_printf+0x43/0x45 acpi_info+0x5c/0x63 ? __acpi_map_table+0x13/0x18 ? acpi_os_map_iomem+0x21/0x147 acpi_tb_print_table_header+0x177/0x186 acpi_tb_install_table_with_override+0x4b/0x62 acpi_tb_install_standard_table+0xd9/0x215 ? early_ioremap+0x13/0x15 ? __acpi_map_table+0x13/0x18 acpi_tb_parse_root_table+0x16e/0x1b4 acpi_initialize_tables+0x57/0x59 acpi_table_init+0x50/0xce acpi_boot_table_init+0x1e/0x85 setup_arch+0x9b7/0xcc4 start_kernel+0x94/0x42d ? early_idt_handlers+0x120/0x120 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0xf3/0x100 Quote reply from Lv.zheng about the early ioremap slot usage in this case: """ In early_efi_scroll_up(), 2 mapping entries will be used for the src/dst screen buffer. In drivers/acpi/acpica/tbutils.c, we've improved the early table loading code in acpi_tb_parse_root_table(). We now need 2 mapping entries: 1. One mapping entry is used for RSDT table mapping. Each RSDT entry contains an address for another ACPI table. 2. For each entry in RSDP, we need another mapping entry to map the table to perform necessary check/override before installing it. When acpi_tb_parse_root_table() prints something through EFI earlyprintk console, we'll have 4 mapping entries used. The current 4 slots setting of early_ioremap() seems to be too small for such a use case. """ Thus increase the slot to 8 in this patch to fix this issue. boot-time mappings become 512 page with this patch. Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05x86/xen: don't copy bogus duplicate entries into kernel page tablesStefan Bader
commit 0b5a50635fc916cf46e3de0b819a61fc3f17e7ee upstream. When RANDOMIZE_BASE (KASLR) is enabled; or the sum of all loaded modules exceeds 512 MiB, then loading modules fails with a warning (and hence a vmalloc allocation failure) because the PTEs for the newly-allocated vmalloc address space are not zero. WARNING: CPU: 0 PID: 494 at linux/mm/vmalloc.c:128 vmap_page_range_noflush+0x2a1/0x360() This is caused by xen_setup_kernel_pagetables() copying level2_kernel_pgt into level2_fixmap_pgt, overwriting many non-present entries. Without KASLR, the normal kernel image size only covers the first half of level2_kernel_pgt and module space starts after that. L4[511]->level3_kernel_pgt[510]->level2_kernel_pgt[ 0..255]->kernel [256..511]->module [511]->level2_fixmap_pgt[ 0..505]->module This allows 512 MiB of of module vmalloc space to be used before having to use the corrupted level2_fixmap_pgt entries. With KASLR enabled, the kernel image uses the full PUD range of 1G and module space starts in the level2_fixmap_pgt. So basically: L4[511]->level3_kernel_pgt[510]->level2_kernel_pgt[0..511]->kernel [511]->level2_fixmap_pgt[0..505]->module And now no module vmalloc space can be used without using the corrupt level2_fixmap_pgt entries. Fix this by properly converting the level2_fixmap_pgt entries to MFNs, and setting level1_fixmap_pgt as read-only. A number of comments were also using the the wrong L3 offset for level2_kernel_pgt. These have been corrected. Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05xen/manage: Always freeze/thaw processes when suspend/resumingRoss Lagerwall
commit 61a734d305e16944b42730ef582a7171dc733321 upstream. Always freeze processes when suspending and thaw processes when resuming to prevent a race noticeable with HVM guests. This prevents a deadlock where the khubd kthread (which is designed to be freezable) acquires a usb device lock and then tries to allocate memory which requires the disk which hasn't been resumed yet. Meanwhile, the xenwatch thread deadlocks waiting for the usb device lock. Freezing processes fixes this because the khubd thread is only thawed after the xenwatch thread finishes resuming all the devices. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05KVM: s390/mm: Fix guest storage key corruption in ptep_set_access_flagsChristian Borntraeger
commit 1951497d90d6754201af3e65241a06f9ef6755cd upstream. commit 0944fe3f4a32 ("s390/mm: implement software referenced bits") triggered another paging/storage key corruption. There is an unhandled invalid->valid pte change where we have to set the real storage key from the pgste. When doing paging a guest page might be swapcache or swap and when faulted in it might be read-only and due to a parallel scan old. An do_wp_page will make it writeable and young. Due to software reference tracking this page was invalid and now becomes valid. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05KVM: s390/mm: Fix storage key corruption during swappingChristian Borntraeger
commit 3e03d4c46daa849880837d802e41c14132a03ef9 upstream. Since 3.12 or more precisely commit 0944fe3f4a32 ("s390/mm: implement software referenced bits") guest storage keys get corrupted during paging. This commit added another valid->invalid translation for page tables - namely ptep_test_and_clear_young. We have to transfer the storage key into the pgste in that case. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05KVM: s390/mm: try a cow on read only pages for key opsChristian Borntraeger
commit ab3f285f227fec62868037e9b1b1fd18294a83b8 upstream. The PFMF instruction handler blindly wrote the storage key even if the page was mapped R/O in the host. Lets try a COW before continuing and bail out in case of errors. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05KVM: s390: Fix user triggerable bug in dead codeChristian Borntraeger
commit 614a80e474b227cace52fd6e3c790554db8a396e upstream. In the early days, we had some special handling for the KVM_EXIT_S390_SIEIC exit, but this was gone in 2009 with commit d7b0b5eb3000 (KVM: s390: Make psw available on all exits, not just a subset). Now this switch statement is just a sanity check for userspace not messing with the kvm_run structure. Unfortunately, this allows userspace to trigger a kernel BUG. Let's just remove this switch statement. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05cgroup: fix unbalanced lockingZefan Li
commit eb4aec84d6bdf98d00cedb41c18000f7a31e648a upstream. cgroup_pidlist_start() holds cgrp->pidlist_mutex and then calls pidlist_array_load(), and cgroup_pidlist_stop() releases the mutex. It is wrong that we release the mutex in the failure path in pidlist_array_load(), because cgroup_pidlist_stop() will be called no matter if cgroup_pidlist_start() returns errno or not. Fixes: 4bac00d16a8760eae7205e41d2c246477d42a210 Signed-off-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05cgroup: delay the clearing of cgrp->kn->privLi Zefan
commit a4189487da1b4f8260c6006b9dc47c3c4107a5ae upstream. Run these two scripts concurrently: for ((; ;)) { mkdir /cgroup/sub rmdir /cgroup/sub } for ((; ;)) { echo $$ > /cgroup/sub/cgroup.procs echo $$ > /cgroup/cgroup.procs } A kernel bug will be triggered: BUG: unable to handle kernel NULL pointer dereference at 00000038 IP: [<c10bbd69>] cgroup_put+0x9/0x80 ... Call Trace: [<c10bbe19>] cgroup_kn_unlock+0x39/0x50 [<c10bbe91>] cgroup_kn_lock_live+0x61/0x70 [<c10be3c1>] __cgroup_procs_write.isra.26+0x51/0x230 [<c10be5b2>] cgroup_tasks_write+0x12/0x20 [<c10bb7b0>] cgroup_file_write+0x40/0x130 [<c11aee71>] kernfs_fop_write+0xd1/0x160 [<c1148e58>] vfs_write+0x98/0x1e0 [<c114934d>] SyS_write+0x4d/0xa0 [<c16f656b>] sysenter_do_call+0x12/0x12 We clear cgrp->kn->priv in the end of cgroup_rmdir(), but another concurrent thread can access kn->priv after the clearing. We should move the clearing to css_release_work_fn(). At that time no one is holding reference to the cgroup and no one can gain a new reference to access it. v2: - move RCU_INIT_POINTER() into the else block. (Tejun) - remove the cgroup_parent() check. (Tejun) - update the comment in css_tryget_online_from_dir(). Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05cgroup: reject cgroup names with '\n'Alban Crequy
commit 71b1fb5c4473a5b1e601d41b109bdfe001ec82e0 upstream. /proc/<pid>/cgroup contains one cgroup path on each line. If cgroup names are allowed to contain "\n", applications cannot parse /proc/<pid>/cgroup safely. Signed-off-by: Alban Crequy <alban.crequy@collabora.co.uk> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05regmap: Don't attempt block writes when syncing cache on single_rw devicesMark Brown
commit 5c1ebe7f73f9166893c3459915db8a09d6d1d715 upstream. If the device can't support block writes then don't attempt to use raw syncing which will automatically generate block writes for adjacent registers, use the existing _single() block syncing implementation. Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05regmap: Fix handling of volatile registers for format_write() chipsMark Brown
commit 5844a8b9d98ec11ce1d77610daacf3f0a0e14715 upstream. A previous over-zealous factorisation of code means that we only treat registers as volatile if they are readable. For most devices this is fine since normally most registers can be read and volatility implies readability but for format_write() devices where there is no readback from the hardware and we use volatility to mean simply uncacheability this means that we end up treating all registers as cacheble. A bigger refactoring of the code to clarify this is in order but as a fix make a minimal change and only check readability when checking volatility if there is no format_write() operation defined for the device. Signed-off-by: Mark Brown <broonie@linaro.org> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05regmap: Fix regcache debugfs initializationLars-Peter Clausen
commit 5e0cbe78762b5f02986bf9e59a188dad2f6e0be1 upstream. Commit 6cfec04bcc05 ("regmap: Separate regmap dev initialization") moved the regmap debugfs initialization after regcache initialization. This means that the regmap debugfs directory is not created yet when the cache initialization runs and so any debugfs files registered by the regcache are created in the debugfs root directory rather than the debugfs directory of the regmap instance. Fix this by adding a separate callback for the regcache debugfs initialization which will be called after the parent debugfs entry has been created. Fixes: 6cfec04bcc05 (regmap: Separate regmap dev initialization) Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05memblock, memhotplug: fix wrong type in memblock_find_in_range_node().Tang Chen
commit 0cfb8f0c3e21e36d4a6e472e4c419d58ba848698 upstream. In memblock_find_in_range_node(), we defined ret as int. But it should be phys_addr_t because it is used to store the return value from __memblock_find_range_bottom_up(). The bug has not been triggered because when allocating low memory near the kernel end, the "int ret" won't turn out to be negative. When we started to allocate memory on other nodes, and the "int ret" could be minus. Then the kernel will panic. A simple way to reproduce this: comment out the following code in numa_init(), memblock_set_bottom_up(false); and the kernel won't boot. Reported-by: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Tested-by: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05arm64: Add brackets around user_stack_pointer()Catalin Marinas
commit 2520d039728b2a3c5ae7f79fe2a0e9d182855b12 upstream. Commit 5f888a1d33 (ARM64: perf: support dwarf unwinding in compat mode) changes user_stack_pointer() to return the compat SP for 32-bit tasks but without brackets around the whole definition, with possible issues on the call sites (noticed with a subsequent fix for KSTK_ESP). Fixes: 5f888a1d33c4 (ARM64: perf: support dwarf unwinding in compat mode) Reported-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ACPI / video: disable native backlight for ThinkPad X201sAaron Lu
commit 789eeea128925741e0a105357bebf8855d3bcdee upstream. The ThinkPad X201s has a working ACPI video backlight interface and is shipped before Win8; then there is BIOS update that starts to query _OSI("Windows 2012") and that would make our video module stop creating backlight interface and caused problem for the user. Add it to the DMI table to disable native backlight to fix this problem. Link: https://bugzilla.kernel.org/show_bug.cgi?id=81691 Link: https://bugzilla.kernel.org/show_bug.cgi?id=51231 Reported-and-tested-by: Yves-Alexis Perez <corsac@debian.org> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ACPI / scan: Correct error return value of create_modalias()Mika Westerberg
commit 98d28d0e59160d2d6cb3f6a9050723ac40f89669 upstream. There is a typo, it should be negative -errno instead. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ACPI / hotplug: Generate online uevents for ACPI containersRafael J. Wysocki
commit 8ab17fc92e49bc2b8fff9d220c19bf50ec9c1158 upstream. Commit 46394fd01 (ACPI / hotplug: Move container-specific code out of the core) removed the generation of "online" uevents for containers, because "add" uevents are now generated for them automatically when container system devices are registered. However, there are user space tools that need to be notified when the container and all of its children have been enumerated, which doesn't happen any more. For this reason, add a mechanism allowing "online" uevents to be generated for ACPI containers after enumerating the container along with all of its children. Fixes: 46394fd01 (ACPI / hotplug: Move container-specific code out of the core) Reported-and-tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ACPI / platform / LPSS: disable async suspend/resume of LPSS devicesFu Zhonghui
commit 457920817e645a7dee42c2a75c81c5ed8e12ee1c upstream. On some systems (Asus T100 in particular) there are strict ordering dependencies between LPSS devices with respect to power management that break if they suspend/resume asynchronously. In theory it should be possible to follow those dependencies in the async suspend/resume case too (the ACPI tables tell as that the dependencies are there), but since we're missing infrastructure for that at the moment, disable async suspend/resume for all of the LPSS devices for the time being. Link: http://marc.info/?l=linux-acpi&m=141158962321905&w=2 Fixes: 8ce62f85a81f (ACPI / platform / LPSS: Enable async suspend/resume of LPSS devices) Signed-off-by: Li Aubrey <aubrey.li@linux.intel.com> Signed-off-by: Fu Zhonghui <zhonghui.fu@linux.intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05gpio / ACPI: Use pin index and bit lengthSrinivas Pandruvada
commit c15d821ddb9dac9ac6b5beb75bf942f3bc3a4004 upstream. Fix code when the operation region callback is for an gpio, which is not at index 0 and for partial pins in a GPIO definition. For example: Name (GMOD, ResourceTemplate () { //3 Outputs that define the Power mode of the device GpioIo (Exclusive, PullDown, , , , "\\_SB.GPI2") {10, 11, 12} }) } If opregion callback calls is for: - Set pin 10, then address = 0 and bit length = 1 - Set pin 11, then address = 1 and bit length = 1 - Set for both pin 11 and pin 12, then address = 1, bit length = 2 This change requires updated ACPICA gpio operation handler code to send the pin index and bit length. Fixes: 473ed7be0da0 (gpio / ACPI: Add support for ACPI GPIO operation regions) Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ACPICA: Update to GPIO region handler interface.Bob Moore
commit 75ec6e55f1384548311a13ce4fcb39c516053314 upstream. Changes to correct several GPIO issues: 1) The update_rule in a GPIO field definition is now ignored; a read-modify-write operation is never performed for GPIO fields. (Internally, this means that the field assembly/disassembly code is completely bypassed for GPIO.) 2) The Address parameter passed to a GPIO region handler is now the bit offset of the field from a previous Connection() operator. Thus, it becomes a "Pin Number Index" into the Connection() resource descriptor. 3) The bit_width parameter passed to a GPIO region handler is now the exact bit width of the GPIO field. Thus, it can be interpreted as "number of pins". Overall, we can now say that the region handler interface to GPIO handlers is a raw "bit/pin" addressed interface, not a byte-addressed interface like the system_memory handler interface. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05MIPS: mcount: Adjust stack pointer for static trace in MIPS32Markos Chandras
commit 8a574cfa2652545eb95595d38ac2a0bb501af0ae upstream. Every mcount() call in the MIPS 32-bit kernel is done as follows: [...] move at, ra jal _mcount addiu sp, sp, -8 [...] but upon returning from the mcount() function, the stack pointer is not adjusted properly. This is explained in details in 58b69401c797 (MIPS: Function tracer: Fix broken function tracing). Commit ad8c396936e3 ("MIPS: Unbreak function tracer for 64-bit kernel.) fixed the stack manipulation for 64-bit but it didn't fix it completely for MIPS32. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7792/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05MIPS: Fix MFC1 & MFHC1 emulation for 64-bit MIPS systemsPaul Burton
commit c8c0da6bdf0f0d6f59fc23aab6ee373a131df82d upstream. Commit bbd426f542cb "MIPS: Simplify FP context access" modified the SIFROMREG & SIFROMHREG macros such that they return unsigned rather than signed 32b integers. I had believed that to be fine, but inadvertently missed the MFC1 & MFHC1 cases which write to a struct pt_regs regs element. On MIPS32 this is fine, but on 64 bit those saved regs' fields are 64 bit wide. Using unsigned values caused the 32 bit value from the FP register to be zero rather than sign extended as the architecture specifies, causing incorrect emulation of the MFC1 & MFHc1 instructions. Fix by reintroducing the casts to signed integers, and therefore the sign extension. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7848/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05MIPS: ZBOOT: add missing <linux/string.h> includeAurelien Jarno
commit 29593fd5a8149462ed6fad0d522234facdaee6c8 upstream. Commit dc4d7b37 (MIPS: ZBOOT: gather string functions into string.c) moved the string related functions into a separate file, which might cause the following build error, depending on the configuration: | CC arch/mips/boot/compressed/decompress.o | In file included from linux/arch/mips/boot/compressed/../../../../lib/decompress_unxz.c:234:0, | from linux/arch/mips/boot/compressed/decompress.c:67: | linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'fill_temp': | linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c:162:2: error: implicit declaration of function 'memcpy' [-Werror=implicit-function-declaration] | cc1: some warnings being treated as errors | linux/scripts/Makefile.build:308: recipe for target 'arch/mips/boot/compressed/decompress.o' failed | make[6]: *** [arch/mips/boot/compressed/decompress.o] Error 1 | linux/arch/mips/Makefile:308: recipe for target 'vmlinuz' failed It does not fail with the standard configuration, as when CONFIG_DYNAMIC_DEBUG is not enabled <linux/string.h> gets included in include/linux/dynamic_debug.h. There might be other ways for it to get indirectly included. We can't add the include directly in xz_dec_stream.c as some architectures might want to use a different version for the boot/ directory (see for example arch/x86/boot/string.h). Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7420/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ARM: 8178/1: fix set_tls for !CONFIG_KUSER_HELPERSNathan Lynch
commit 9cc6d9e5daaa147a9a3e31557efcb331989e77be upstream. Joachim Eastwood reports that commit fbfb872f5f41 "ARM: 8148/1: flush TLS and thumbee register state during exec" causes a boot-time crash on a Cortex-M4 nommu system: Freeing unused kernel memory: 68K (281e5000 - 281f6000) Unhandled exception: IPSR = 00000005 LR = fffffff1 CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-rc6-00313-gd2205fa30aa7 #191 task: 29834000 ti: 29832000 task.ti: 29832000 PC is at flush_thread+0x2e/0x40 LR is at flush_thread+0x21/0x40 pc : [<2800954a>] lr : [<2800953d>] psr: 4100000b sp : 29833d60 ip : 00000000 fp : 00000001 r10: 00003cf8 r9 : 29b1f000 r8 : 00000000 r7 : 29b0bc00 r6 : 29834000 r5 : 29832000 r4 : 29832000 r3 : ffff0ff0 r2 : 29832000 r1 : 00000000 r0 : 282121f0 xPSR: 4100000b CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-rc6-00313-gd2205fa30aa7 #191 [<2800afa5>] (unwind_backtrace) from [<2800a327>] (show_stack+0xb/0xc) [<2800a327>] (show_stack) from [<2800a963>] (__invalid_entry+0x4b/0x4c) The problem is that set_tls is attempting to clear the TLS location in the kernel-user helper page, which isn't set up on V7M. Fix this by guarding the write to the kuser helper page with a CONFIG_KUSER_HELPERS ifdef. Fixes: fbfb872f5f41 ARM: 8148/1: flush TLS and thumbee register state during exec Reported-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ARM: 8165/1: alignment: don't break misaligned NEON load/storeRobin Murphy
commit 5ca918e5e3f9df4634077c06585c42bc6a8d699a upstream. The alignment fixup incorrectly decodes faulting ARM VLDn/VSTn instructions (where the optional alignment hint is given but incorrect) as LDR/STR, leading to register corruption. Detect these and correctly treat them as unhandled, so that userspace gets the fault it expects. Reported-by: Simon Hosie <simon.hosie@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ARM: imx: fix .is_enabled() of shared gate clockShawn Guo
commit 9e1ac462b982f496ed3b491f02c417dcc8e40347 upstream. Commit 63288b721a80 ("ARM: imx: fix shared gate clock") attempted to fix an issue with particular enable/disable sequence from two shared gate clocks. But unfortunately, while it partially fixed the issue, it also did something wrong in .is_enabled() function hook. In case of shared gate, the function shouldn't really query the hardware state via share_count, because the function is trying to query the enabling state of the clock in question, not the hardware state which is shared by multiple clocks. Fix the issue by returning the enable_count of the clock itself which is maintained by clock core, in case it's a clock sharing hardware gate with others. As the result, the initialization of share_count per hardware state is not needed now. So remove it. Reported-by: Fabio Estevam <fabio.estevam@freescale.com> Fixes: 63288b721a80 ("ARM: imx: fix shared gate clock") Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ARM: DT: imx53: fix lvds channel 1 portMarkus Niebel
commit 1b134c9c4b555342be667f144ee714af1c3f6a9f upstream. using LVDS channel 1 on an i.MX53 leads to following error: imx-ldb 53fa8008.ldb: unable to set di0 parent clock to ldb_di1 This comes from imx_ldb_set_clock with mux = 0. Mux parameter must be "1" for reparenting di1 clock to ldb_di1. The value of the mux param comes from device tree port settings. On i.MX5, the internal two-input-multiplexer is used. Due to hardware limitations, only one port (port@[0,1]) can be used for each channel (lvds-channel@[0,1], respectively) Documentation update suggested by Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com> Fixes: e05c8c9a790a ("ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi") Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ARM: dts: dra7-evm: Fix NAND GPMC timingsRoger Quadros
commit 5990047cef0c6a36eefcb166bd32d99a8f95c75b upstream. The nand timings were scaled down by 2 to account for the 2x rate returned by clk_get_rate(gpmc_fclk). As the clock data got fixed by [1], revert back to actual timings (i.e. scale them up by 2). Without this NAND doesn't work on dra7-evm. [1] - commit dd94324b983afe114ba9e7ee3649313b451f63ce ARM: dts: dra7xx-clocks: Fix the l3 and l4 clock rates Fixes: ff66a3c86e00 ("ARM: dts: dra7: add support for parallel NAND flash") Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 01:17:53 +0000