summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-07-17powerpc/perf: Never program book3s PMCs with values >= 0x80000000Anton Blanchard
commit f56029410a13cae3652d1f34788045c40a13ffc7 upstream. We are seeing a lot of PMU warnings on POWER8: Can't find PMC that caused IRQ Looking closer, the active PMC is 0 at this point and we took a PMU exception on the transition from negative to 0. Some versions of POWER8 have an issue where they edge detect and not level detect PMC overflows. A number of places program the PMC with (0x80000000 - period_left), where period_left can be negative. We can either fix all of these or just ensure that period_left is always >= 1. This patch takes the second option. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17powerpc/kvm: Remove redundant save of SIER AND MMCR2Joel Stanley
commit f73128f4f680e8be68cda831f2710214559583cb upstream. These two registers are already saved in the block above. Aside from being unnecessary, by the time we get down to the second save location r8 no longer contains MMCR2, so we are clobbering the saved value with PMC5. MMCR2 primarily consists of counter freeze bits. So restoring the value of PMC5 into MMCR2 will most likely have the effect of freezing counters. Fixes: 72cde5a88d37 ("KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8") Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17ACPI / EC: Fix race condition in ec_transaction_completed()Lv Zheng
commit c0d653412fc8450370167a3268b78fc772ff9c87 upstream. There is a race condition in ec_transaction_completed(). When ec_transaction_completed() is called in the GPE handler, it could return true because of (ec->curr == NULL). Then the wake_up() invocation could complete the next command unexpectedly since there is no lock between the 2 invocations. With the previous cleanup, the IBF=0 waiter race need not be handled any more. It's now safe to return a flag from advance_condition() to indicate the requirement of wakeup, the flag is returned from a locked context. The ec_transaction_completed() is now only invoked by the ec_poll() where the ec->curr is ensured to be different from NULL. After cleaning up, the EVT_SCI=1 check should be moved out of the wakeup condition so that an EVT_SCI raised with (ec->curr == NULL) can trigger a QR_SC command. Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891 Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931 Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911 Reported-and-tested-by: Gareth Williams <gareth@garethwilliams.me.uk> Reported-and-tested-by: Hans de Goede <jwrdegoede@fedoraproject.org> Reported-by: Barton Xu <tank.xuhan@gmail.com> Tested-by: Steffen Weber <steffen.weber@gmail.com> Tested-by: Arthur Chen <axchen@nvidia.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17ACPI / EC: Remove duplicated ec_wait_ibf0() waiterLv Zheng
commit 9b80f0f73ae1583c22325ede341c74195847618c upstream. After we've added the first command byte write into advance_transaction(), the IBF=0 waiter is duplicated with the command completion waiter implemented in the ec_poll() because: If IBF=1 blocked the first command byte write invoked in the task context ec_poll(), it would be kicked off upon IBF=0 interrupt or timed out and retried again in the task context. Remove this seperate and duplicate IBF=0 waiter. By doing so we can reduce the overall number of times to access the EC_SC(R) status register. Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891 Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931 Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911 Reported-and-tested-by: Gareth Williams <gareth@garethwilliams.me.uk> Reported-and-tested-by: Hans de Goede <jwrdegoede@fedoraproject.org> Reported-by: Barton Xu <tank.xuhan@gmail.com> Tested-by: Steffen Weber <steffen.weber@gmail.com> Tested-by: Arthur Chen <axchen@nvidia.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17ACPI / EC: Add asynchronous command byte write supportLv Zheng
commit f92fca0060fc4dc9227342d0072d75df98c1e5a5 upstream. Move the first command byte write into advance_transaction() so that all EC register accesses that can affect the command processing state machine can happen in this asynchronous state machine advancement function. The advance_transaction() function then can be a complete implementation of an asyncrhonous transaction for a single command so that: 1. The first command byte can be written in the interrupt context; 2. The command completion waiter can also be used to wait the first command byte's timeout; 3. In BURST mode, the follow-up command bytes can be written in the interrupt context directly, so that it doesn't need to return to the task context. Returning to the task context reduces the throughput of the BURST mode and in the worst cases where the system workload is very high, this leads to the hardware driven automatic BURST mode exit. In order not to increase memory consumption, convert 'done' into 'flags' to contain multiple indications: 1. ACPI_EC_COMMAND_COMPLETE: converting from original 'done' condition, indicating the completion of the command transaction. 2. ACPI_EC_COMMAND_POLL: indicating the availability of writing the first command byte. A new command can utilize this flag to compete for the right of accessing the underlying hardware. There is a follow-up bug fix that has utilized this new flag. The 2 flags are important because it also reflects a key concept of IO programs' design used in the system softwares. Normally an IO program running in the kernel should first be implemented in the asynchronous way. And the 2 flags are the most common way to implement its synchronous operations on top of the asynchronous operations: 1. POLL: This flag can be used to block until the asynchronous operations can happen. 2. COMPLETE: This flag can be used to block until the asynchronous operations have completed. By constructing code cleanly in this way, many difficult problems can be solved smoothly. Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891 Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931 Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911 Reported-and-tested-by: Gareth Williams <gareth@garethwilliams.me.uk> Reported-and-tested-by: Hans de Goede <jwrdegoede@fedoraproject.org> Reported-by: Barton Xu <tank.xuhan@gmail.com> Tested-by: Steffen Weber <steffen.weber@gmail.com> Tested-by: Arthur Chen <axchen@nvidia.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17ACPI / EC: Avoid race condition related to advance_transaction()Lv Zheng
commit 66b42b78bc1e816f92b662e8888c89195e4199e1 upstream. The advance_transaction() will be invoked from the IRQ context GPE handler and the task context ec_poll(). The handling of this function is locked so that the EC state machine are ensured to be advanced sequentially. But there is a problem. Before invoking advance_transaction(), EC_SC(R) is read. Then for advance_transaction(), there could be race condition around the lock from both contexts. The first one reading the register could fail this race and when it passes the stale register value to the state machine advancement code, the hardware condition is totally different from when the register is read. And the hardware accesses determined from the wrong hardware status can break the EC state machine. And there could be cases that the functionalities of the platform firmware are seriously affected. For example: 1. When 2 EC_DATA(W) writes compete the IBF=0, the 2nd EC_DATA(W) write may be invalid due to IBF=1 after the 1st EC_DATA(W) write. Then the hardware will either refuse to respond a next EC_SC(W) write of the next command or discard the current WR_EC command when it receives a EC_SC(W) write of the next command. 2. When 1 EC_SC(W) write and 1 EC_DATA(W) write compete the IBF=0, the EC_DATA(W) write may be invalid due to IBF=1 after the EC_SC(W) write. The next EC_DATA(R) could never be responded by the hardware. This is the root cause of the reported issue. Fix this issue by moving the EC_SC(R) access into the lock so that we can ensure that the state machine is advanced consistently. Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891 Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931 Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911 Reported-and-tested-by: Gareth Williams <gareth@garethwilliams.me.uk> Reported-and-tested-by: Hans de Goede <jwrdegoede@fedoraproject.org> Reported-by: Barton Xu <tank.xuhan@gmail.com> Tested-by: Steffen Weber <steffen.weber@gmail.com> Tested-by: Arthur Chen <axchen@nvidia.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17ACPI / resources: only reject zero length resources based at address zeroAndy Whitcroft
commit 867f9d463b82462793ea4610e748be0b04b37fc7 upstream. The recently merged change (in v3.14-rc6) to ACPI resource detection (below) causes all zero length ACPI resources to be elided from the table: commit b355cee88e3b1a193f0e9a81db810f6f83ad728b Author: Zhang Rui <rui.zhang@intel.com> Date: Thu Feb 27 11:37:15 2014 +0800 ACPI / resources: ignore invalid ACPI device resources This change has caused a regression in (at least) serial port detection for a number of machines (see LP#1313981 [1]). These seem to represent their IO regions (presumably incorrectly) as a zero length region. Reverting the above commit restores these serial devices. Only elide zero length resources which lie at address 0. Fixes: b355cee88e3b (ACPI / resources: ignore invalid ACPI device resources) Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17Revert "ACPI / AC: Remove AC's proc directory."Lan Tianyu
commit e63f6e28dda6de3de2392ddca321e211fd860925 upstream. Revert commit ab0fd674d6ce (ACPI / AC: Remove AC's proc directory.), because some old tools (e.g. kpowersave from kde 3.5.10) are still using /proc/acpi/ac_adapter. Fixes: ab0fd674d6ce (ACPI / AC: Remove AC's proc directory.) Reported-and-tested-by: Sorin Manolache <sorinm@gmail.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17hwmon: (adm1021) Fix cache problem when writing temperature limitsAxel Lin
commit c024044d4da2c9c3b32933b4235df1e409293b84 upstream. The module test script for the adm1021 driver exposes a cache problem when writing temperature limits. temp_min and temp_max are expected to be stored in milli-degrees C but are stored in degrees C. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17hwmon: (adm1029) Ensure the fan_div cache is updated in set_fan_divAxel Lin
commit 1035a9e3e9c76b64a860a774f5b867d28d34acc2 upstream. Writing to fanX_div does not clear the cache. As a result, reading from fanX_div may return the old value for up to two seconds after writing a new value. This patch ensures the fan_div cache is updated in set_fan_div(). Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17hwmon: (adm1031) Fix writes to limit registersGuenter Roeck
commit 145e74a4e5022225adb84f4e5d4fff7938475c35 upstream. Upper limit for write operations to temperature limit registers was clamped to a fractional value. However, limit registers do not support fractional values. As a result, upper limits of 127.5 degrees C or higher resulted in a rounded limit of 128 degrees C. Since limit registers are signed, this was stored as -128 degrees C. Clamp limits to (-55, +127) degrees C to solve the problem. Value on writes to auto_temp[12]_min and auto_temp[12]_max were not clamped at all, but masked. As a result, out-of-range writes resulted in a more or less arbitrary limit. Clamp those attributes to (0, 127) degrees C for more predictable results. Cc: Axel Lin <axel.lin@ingics.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17hwmon: (emc2103) Clamp limits instead of bailing outGuenter Roeck
commit f6c2dd20108c35e30e2c1f3c6142d189451a626b upstream. It is customary to clamp limits instead of bailing out with an error if a configured limit is out of the range supported by the driver. This simplifies limit configuration, since the user will not typically know chip and/or driver specific limits. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17hwmon: (amc6821) Fix permissions for temp2_inputAxel Lin
commit df86754b746e9a0ff6f863f690b1c01d408e3cdc upstream. temp2_input should not be writable, fix it. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17hwmon: (adc128d818) Drop write support on inX_input attributesGuenter Roeck
commit 7fe7381cbdadf16792e733789983690b3fa82880 upstream. Writes into input registers doesn't make sense, even more so since the writes actually ended up writing into the maximum limit registers. Drop it. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17thermal: hwmon: Make the check for critical temp valid consistentAaron Lu
commit e8db5d6736a712a3e2280c0e31f4b301d85172d8 upstream. On 05/21/2014 04:22 PM, Aaron Lu wrote: > On 05/21/2014 01:57 PM, Kui Zhang wrote: >> Hello, >> >> I get following error when rmmod thermal. >> >> rmmod thermal >> Killed While dealing with this problem, I found another problem that also results in a kernel crash on thermal module removal: From: Aaron Lu <aaron.lu@intel.com> Date: Wed, 21 May 2014 16:05:38 +0800 Subject: thermal: hwmon: Make the check for critical temp valid consistent We used the tz->ops->get_crit_temp && !tz->ops->get_crit_temp(tz, temp) to decide if we need to create the temp_crit attribute file but we just check if tz->ops->get_crit_temp exists to decide if we need to remove that attribute file. Some ACPI thermal zone doesn't have a valid critical trip point and that would result in removing a non-existent device file on thermal module unload. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17serial: imx: Fix build breakagePeter Hurley
commit 8bec751bd63847b4044aab8b215db52aa6abde61 upstream. Fix breakage introduced by commit c557d392fbf5badd693ea1946a4317c87a26a716, 'serial: Test for no tx data on tx restart'. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17i8k: Fix non-SMP operationGuenter Roeck
commit 6d827fbcc370ca259a2905309f64161ab7b10596 upstream. Commit f36fdb9f0266 (i8k: Force SMM to run on CPU 0) adds support for multi-core CPUs to the driver. Unfortunately, that causes it to fail loading if compiled without SMP support, at least on 32 bit kernels. Kernel log shows "i8k: unable to get SMM Dell signature", and function i8k_smm is found to return -EINVAL. Testing revealed that the culprit is the missing return value check of set_cpus_allowed_ptr. Fixes: f36fdb9f0266 (i8k: Force SMM to run on CPU 0) Reported-by: Jim Bos <jim876@xs4all.nl> Tested-by: Jim Bos <jim876@xs4all.nl> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17ahci: imx: manage only sata_ref_clk in imx_sata_enable[disable]Shawn Guo
commit e6dd42a917e62d916c6e513dbf87a4dec8cf3a1c upstream. Doing suspend/resume on imx6q and imx53 boards with no SATA disk attached will trigger the following warning. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 661 at drivers/ata/libahci.c:224 ahci_enable_ahci+0x74/0x8) Modules linked in: CPU: 0 PID: 661 Comm: sh Tainted: G W 3.15.0-rc5-next-20140521-000027 Backtrace: [<80011c90>] (dump_backtrace) from [<80011e2c>] (show_stack+0x18/0x1c) r6:803a22f4 r5:00000000 r4:00000000 r3:00000000 [<80011e14>] (show_stack) from [<80661e60>] (dump_stack+0x88/0xa4) [<80661dd8>] (dump_stack) from [<80028fdc>] (warn_slowpath_common+0x70/0x94) r5:00000009 r4:00000000 [<80028f6c>] (warn_slowpath_common) from [<80029024>] (warn_slowpath_null+0x24/) r8:808f68c4 r7:00000000 r6:00000000 r5:00000000 r4:e0810004 [<80029000>] (warn_slowpath_null) from [<803a22f4>] (ahci_enable_ahci+0x74/0x80) [<803a2280>] (ahci_enable_ahci) from [<803a2324>] (ahci_reset_controller+0x24/0) r8:ddcd9410 r7:80351178 r6:ddcd9444 r5:dde8b850 r4:e0810000 r3:ddf35e90 [<803a2300>] (ahci_reset_controller) from [<803a2c68>] (ahci_platform_resume_ho) r7:80351178 r6:ddcd9444 r5:dde8b850 r4:ddcd9410 [<803a2c30>] (ahci_platform_resume_host) from [<803a38f0>] (imx_ahci_resume+0x2) r5:00000000 r4:ddcd9410 [<803a38c4>] (imx_ahci_resume) from [<803511ac>] (platform_pm_resume+0x34/0x54) .... The reason is that the SATA controller has no working clock at this point, and thus ahci_enable_ahci() fails to enable the controller. In case that there is no SATA disk attached, the imx_sata_disable() gets called in ahci_imx_error_handler(), and both sata_clk and sata_ref_clk will be disabled there. Because all the imx_sata_enable() calls afterward will return immediately due to imxpriv->no_device check, the SATA controller working clock sata_clk will never get any chance to be enabled again. This is a regression caused by commit 90870d79d4f2 (ahci-imx: Port to library-ised ahci_platform). Before the commit, only sata_ref_clk is managed by the driver in enable/disable function. But after the commit, all the clocks are enabled/disabled in a row by ahci platform helpers ahci_platform_enable[disable]_clks. Since ahb_clk is a bus clock which does not have gate at all, and i.MX low-power hardware module already manages sata_clk across suspend/resume cycle, the only clock that needs to be managed by software is sata_ref_clk. So instead of using ahci_platform_enable[disable]_clks to manage all the clocks in a row from imx_sata_enable[disable], we should manage only sata_ref_clk in there. Reported-by: Fabio Estevam <fabio.estevam@freescale.com> Fixes: 90870d79d4f2 (ahci-imx: Port to library-ised ahci_platform) Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17workqueue: zero cpumask of wq_numa_possible_cpumask on initYasuaki Ishimatsu
commit 5a6024f1604eef119cf3a6fa413fe0261a81a8f3 upstream. When hot-adding and onlining CPU, kernel panic occurs, showing following call trace. BUG: unable to handle kernel paging request at 0000000000001d08 IP: [<ffffffff8114acfd>] __alloc_pages_nodemask+0x9d/0xb10 PGD 0 Oops: 0000 [#1] SMP ... Call Trace: [<ffffffff812b8745>] ? cpumask_next_and+0x35/0x50 [<ffffffff810a3283>] ? find_busiest_group+0x113/0x8f0 [<ffffffff81193bc9>] ? deactivate_slab+0x349/0x3c0 [<ffffffff811926f1>] new_slab+0x91/0x300 [<ffffffff815de95a>] __slab_alloc+0x2bb/0x482 [<ffffffff8105bc1c>] ? copy_process.part.25+0xfc/0x14c0 [<ffffffff810a3c78>] ? load_balance+0x218/0x890 [<ffffffff8101a679>] ? sched_clock+0x9/0x10 [<ffffffff81105ba9>] ? trace_clock_local+0x9/0x10 [<ffffffff81193d1c>] kmem_cache_alloc_node+0x8c/0x200 [<ffffffff8105bc1c>] copy_process.part.25+0xfc/0x14c0 [<ffffffff81114d0d>] ? trace_buffer_unlock_commit+0x4d/0x60 [<ffffffff81085a80>] ? kthread_create_on_node+0x140/0x140 [<ffffffff8105d0ec>] do_fork+0xbc/0x360 [<ffffffff8105d3b6>] kernel_thread+0x26/0x30 [<ffffffff81086652>] kthreadd+0x2c2/0x300 [<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60 [<ffffffff815f20ec>] ret_from_fork+0x7c/0xb0 [<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60 In my investigation, I found the root cause is wq_numa_possible_cpumask. All entries of wq_numa_possible_cpumask is allocated by alloc_cpumask_var_node(). And these entries are used without initializing. So these entries have wrong value. When hot-adding and onlining CPU, wq_update_unbound_numa() is called. wq_update_unbound_numa() calls alloc_unbound_pwq(). And alloc_unbound_pwq() calls get_unbound_pool(). In get_unbound_pool(), worker_pool->node is set as follow: 3592 /* if cpumask is contained inside a NUMA node, we belong to that node */ 3593 if (wq_numa_enabled) { 3594 for_each_node(node) { 3595 if (cpumask_subset(pool->attrs->cpumask, 3596 wq_numa_possible_cpumask[node])) { 3597 pool->node = node; 3598 break; 3599 } 3600 } 3601 } But wq_numa_possible_cpumask[node] does not have correct cpumask. So, wrong node is selected. As a result, kernel panic occurs. By this patch, all entries of wq_numa_possible_cpumask are allocated by zalloc_cpumask_var_node to initialize them. And the panic disappeared. Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: bce903809ab3 ("workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[]") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17cpuset,mempolicy: fix sleeping function called from invalid contextGu Zheng
commit 391acf970d21219a2a5446282d3b20eace0c0d7a upstream. When runing with the kernel(3.15-rc7+), the follow bug occurs: [ 9969.258987] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:586 [ 9969.359906] in_atomic(): 1, irqs_disabled(): 0, pid: 160655, name: python [ 9969.441175] INFO: lockdep is turned off. [ 9969.488184] CPU: 26 PID: 160655 Comm: python Tainted: G A 3.15.0-rc7+ #85 [ 9969.581032] Hardware name: FUJITSU-SV PRIMEQUEST 1800E/SB, BIOS PRIMEQUEST 1000 Series BIOS Version 1.39 11/16/2012 [ 9969.706052] ffffffff81a20e60 ffff8803e941fbd0 ffffffff8162f523 ffff8803e941fd18 [ 9969.795323] ffff8803e941fbe0 ffffffff8109995a ffff8803e941fc58 ffffffff81633e6c [ 9969.884710] ffffffff811ba5dc ffff880405c6b480 ffff88041fdd90a0 0000000000002000 [ 9969.974071] Call Trace: [ 9970.003403] [<ffffffff8162f523>] dump_stack+0x4d/0x66 [ 9970.065074] [<ffffffff8109995a>] __might_sleep+0xfa/0x130 [ 9970.130743] [<ffffffff81633e6c>] mutex_lock_nested+0x3c/0x4f0 [ 9970.200638] [<ffffffff811ba5dc>] ? kmem_cache_alloc+0x1bc/0x210 [ 9970.272610] [<ffffffff81105807>] cpuset_mems_allowed+0x27/0x140 [ 9970.344584] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.409282] [<ffffffff811b1385>] __mpol_dup+0xe5/0x150 [ 9970.471897] [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150 [ 9970.536585] [<ffffffff81068c86>] ? copy_process.part.23+0x606/0x1d40 [ 9970.613763] [<ffffffff810bf28d>] ? trace_hardirqs_on+0xd/0x10 [ 9970.683660] [<ffffffff810ddddf>] ? monotonic_to_bootbased+0x2f/0x50 [ 9970.759795] [<ffffffff81068cf0>] copy_process.part.23+0x670/0x1d40 [ 9970.834885] [<ffffffff8106a598>] do_fork+0xd8/0x380 [ 9970.894375] [<ffffffff81110e4c>] ? __audit_syscall_entry+0x9c/0xf0 [ 9970.969470] [<ffffffff8106a8c6>] SyS_clone+0x16/0x20 [ 9971.030011] [<ffffffff81642009>] stub_clone+0x69/0x90 [ 9971.091573] [<ffffffff81641c29>] ? system_call_fastpath+0x16/0x1b The cause is that cpuset_mems_allowed() try to take mutex_lock(&callback_mutex) under the rcu_read_lock(which was hold in __mpol_dup()). And in cpuset_mems_allowed(), the access to cpuset is under rcu_read_lock, so in __mpol_dup, we can reduce the rcu_read_lock protection region to protect the access to cpuset only in current_cpuset_is_being_rebound(). So that we can avoid this bug. This patch is a temporary solution that just addresses the bug mentioned above, can not fix the long-standing issue about cpuset.mems rebinding on fork(): "When the forker's task_struct is duplicated (which includes ->mems_allowed) and it races with an update to cpuset_being_rebound in update_tasks_nodemask() then the task's mems_allowed doesn't get updated. And the child task's mems_allowed can be wrong if the cpuset's nodemask changes before the child has been added to the cgroup's tasklist." Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17workqueue: fix dev_set_uevent_suppress() imbalanceMaxime Bizon
commit bddbceb688c6d0decaabc7884fede319d02f96c8 upstream. Uevents are suppressed during attributes registration, but never restored, so kobject_uevent() does nothing. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: 226223ab3c4118ddd10688cc2c131135848371ab Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17parisc: fix fanotify_mark() syscall on 32bit compat kernelHelge Deller
commit ab8a261ba5e2dd9206da640de5870cc31d568a7c upstream. On parisc we can not use the existing compat implementation for fanotify_mark() because for the 64bit mask parameter the higher and lower 32bits are ordered differently than what the compat function expects from big endian architectures. Specifically: It finally turned out, that on hppa we end up with different assignments of parameters to kernel arguments depending on if we call the glibc wrapper function int fanotify_mark (int __fanotify_fd, unsigned int __flags, uint64_t __mask, int __dfd, const char *__pathname); or directly calling the syscall manually syscall(__NR_fanotify_mark, ...) Reason is, that the syscall() function is implemented as C-function and because we now have the sysno as first parameter in front of the other parameters the compiler will unexpectedly add an empty paramenter in front of the u64 value to ensure the correct calling alignment for 64bit values. This means, on hppa you can't simply use syscall() to call the kernel fanotify_mark() function directly, but you have to use the glibc function instead. This patch fixes the kernel in the hppa-arch specifc coding to adjust the parameters in a way as if userspace calls the glibc wrapper function fanotify_mark(). Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17parisc: add serial ports of C8000/1GHz machine to hardware databaseHelge Deller
commit eadcc7208a2237016be7bdff4551ba7614da85c8 upstream. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17serial: Test for no tx data on tx restartPeter Hurley
commit c557d392fbf5badd693ea1946a4317c87a26a716 upstream. Commit 717f3bbab3c7628736ef738fdbf3d9a28578c26c, 'serial_core: Fix conditional start_tx on ring buffer not empty' exposes an incorrect assumption in several drivers' start_tx methods; the tx ring buffer can, in fact, be empty when restarting tx while performing flow control. Affected drivers: sunsab.c ip22zilog.c pmac_zilog.c sunzilog.c m32r_sio.c imx.c Other in-tree serial drivers either are not affected or already test for empty tx ring buffer before transmitting. Test for empty tx ring buffer in start_tx() method, after transmitting x_char (if applicable). Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Seth Bollinger <sethb@digi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17iio: ti_am335x_adc: Fix: Use same step id at FIFOs both endsJan Kardell
commit baa3c65298c089a9014b4e523a14ec2885cca1bc upstream. Since AI lines could be selected at will (linux-3.11) the sending and receiving ends of the FIFO does not agree about what step is used for a line. It only works if the last lines are used, like 5,6,7, and fails if ie 2,4,6 is selected in DT. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Tested-by: Zubair Lutfullah <zubair.lutfullah@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17USB: serial: ftdi_sio: Add Infineon TriboardMichal Sojka
commit d8279a40e50ad55539780aa617a32a53d7f0953e upstream. This adds support for Infineon TriBoard TC1798 [1]. Only interface 1 is used as serial line (see [2], Figure 8-6). [1] http://www.infineon.com/cms/de/product/microcontroller/development-tools-software-and-kits/tricore-tm-development-tools-software-and-kits/starterkits-and-evaluation-boards/starter-kit-tc1798/channel.html?channel=db3a304333b8a7ca0133cfa3d73e4268 [2] http://www.infineon.com/dgdl/TriBoardManual-TC1798-V10.pdf?folderId=db3a304412b407950112b409ae7c0343&fileId=db3a304333b8a7ca0133cfae99fe426a Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17USB: ftdi_sio: Add extra PID.Bert Vermeulen
commit 5a7fbe7e9ea0b1b9d7ffdba64db1faa3a259164c upstream. This patch adds PID 0x0003 to the VID 0x128d (Testo). At least the Testo 435-4 uses this, likely other gear as well. Signed-off-by: Bert Vermeulen <bert@biot.com> Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17USB: cp210x: add support for Corsair usb dongleAndras Kovacs
commit b9326057a3d8447f5d2e74a7b521ccf21add2ec0 upstream. Corsair USB Dongles are shipped with Corsair AXi series PSUs. These are cp210x serial usb devices, so make driver detect these. I have a program, that can get information from these PSUs. Tested with 2 different dongles shipped with Corsair AX860i and AX1200i units. Signed-off-by: Andras Kovacs <andras@sth.sze.hu> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17usb: option: Add ID for Telewell TW-LTE 4G v2Bernd Wachter
commit 3d28bd840b2d3981cd28caf5fe1df38f1344dd60 upstream. Add ID of the Telewell 4G v2 hardware to option driver to get legacy serial interface working Signed-off-by: Bernd Wachter <bernd.wachter@jolla.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09Linux 3.15.5v3.15.5Greg Kroah-Hartman
2014-07-09mm: fix crashes from mbind() merging vmasHugh Dickins
commit d05f0cdcbe6388723f1900c549b4850360545201 upstream. In v2.6.34 commit 9d8cebd4bcd7 ("mm: fix mbind vma merge problem") introduced vma merging to mbind(), but it should have also changed the convention of passing start vma from queue_pages_range() (formerly check_range()) to new_vma_page(): vma merging may have already freed that structure, resulting in BUG at mm/mempolicy.c:1738 and probably worse crashes. Fixes: 9d8cebd4bcd7 ("mm: fix mbind vma merge problem") Reported-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Tested-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09mm/numa: Remove BUG_ON() in __handle_mm_fault()Rik van Riel
commit 107437febd495a50e2cd09c81bbaa84d30e57b07 upstream. Changing PTEs and PMDs to pte_numa & pmd_numa is done with the mmap_sem held for reading, which means a pmd can be instantiated and turned into a numa one while __handle_mm_fault() is examining the value of old_pmd. If that happens, __handle_mm_fault() should just return and let the page fault retry, instead of throwing an oops. This is handled by the test for pmd_trans_huge(*pmd) below. Signed-off-by: Rik van Riel <riel@redhat.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by: Sunil Pandey <sunil.k.pandey@intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: linux-mm@kvack.org Cc: lwoodman@redhat.com Cc: dave.hansen@intel.com Link: http://lkml.kernel.org/r/20140429153615.2d72098e@annuminas.surriel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Patrick McLean <chutzpah@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09drivers/video/fbdev/fb-puv3.c: Add header files for function unifb_mmapZhichuang SUN
commit fbc6c4a13bbfb420eedfdb26a0a859f9c07e8a7b upstream. Function unifb_mmap calls functions which are defined in linux/mm.h and asm/pgtable.h The related error (for unicore32 with unicore32_defconfig): CC drivers/video/fbdev/fb-puv3.o drivers/video/fbdev/fb-puv3.c: In function 'unifb_mmap': drivers/video/fbdev/fb-puv3.c:646: error: implicit declaration of function 'vm_iomap_memory' drivers/video/fbdev/fb-puv3.c:646: error: implicit declaration of function 'pgprot_noncached' Signed-off-by: Zhichuang Sun <sunzc522@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Joe Perches <joe@perches.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: linux-fbdev@vger.kernel.org Acked-by: Xuetao Guan <gxt@mprc.pku.edu.cn> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09arch/unicore32/mm/alignment.c: include "asm/pgtable.h" to avoid compiling errorChen Gang
commit 1ff38c56cbd095c4c0dfa581a859ba3557830f78 upstream. Need include "asm/pgtable.h" to include "asm-generic/pgtable-nopmd.h", so can let 'pmd_t' defined. The related error with allmodconfig: CC arch/unicore32/mm/alignment.o In file included from arch/unicore32/mm/alignment.c:24: arch/unicore32/include/asm/tlbflush.h:135: error: expected .). before .*. token arch/unicore32/include/asm/tlbflush.h:154: error: expected .). before .*. token In file included from arch/unicore32/mm/alignment.c:27: arch/unicore32/mm/mm.h:15: error: expected .=., .,., .;., .sm. or ._attribute__. before .*. token arch/unicore32/mm/mm.h:20: error: expected .=., .,., .;., .sm. or ._attribute__. before .*. token arch/unicore32/mm/mm.h:25: error: expected .=., .,., .;., .sm. or ._attribute__. before .*. token make[1]: *** [arch/unicore32/mm/alignment.o] Error 1 make: *** [arch/unicore32/mm] Error 2 Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Xuetao Guan <gxt@mprc.pku.edu.cn> Signed-off-by: Xuetao Guan <gxt@mprc.pku.edu.cn> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09drm/i915: fix display power sw state reportingImre Deak
commit b8c000d9bf23e7c1155ef421f595d1cbc25262da upstream. Atm, we refcount both power domains and power wells and intel_display_power_enabled_sw() returns the power domain refcount. What the callers are really interested in though is the sw state of the underlying power wells. Due to this we will report incorrectly that a given power domain is off if its power wells were enabled via another power domain, for example POWER_DOMAIN_INIT which enables all power wells. As a fix return instead the state based on the refcount of all power wells included in the passed in power domain. References: https://bugs.freedesktop.org/show_bug.cgi?id=79505 References: https://bugs.freedesktop.org/show_bug.cgi?id=79038 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09mmc: rtsx: add R1-no-CRC mmc command type handleMicky Ching
commit 5027251eced6e34315a52bd841279df957f627bb upstream. a27fbf2f067b0cd ("mmc: add ignorance case for CMD13 CRC error") produced a cmd.flags unhandled in realtek pci host driver. This will make MMC card fail to initialize, this patch is used to handle the new cmd.flags condition and MMC card can be used. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09netfilter: ctnetlink: fix refcnt leak in dying/unconfirmed list dumperFlorian Westphal
commit cd5f336f1780cb20e83146cde64d3d5779e175e6 upstream. 'last' keeps track of the ct that had its refcnt bumped during previous dump cycle. Thus it must not be overwritten until end-of-function. Another (unrelated, theoretical) issue: Don't attempt to bump refcnt of a conntrack whose reference count is already 0. Such conntrack is being destroyed right now, its memory is freed once we release the percpu dying spinlock. Fixes: b7779d06 ('netfilter: conntrack: spinlock per cpu to protect special lists.') Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09netfilter: nf_nat: fix oops on netns removalFlorian Westphal
commit 945b2b2d259d1a4364a2799e80e8ff32f8c6ee6f upstream. Quoting Samu Kallio: Basically what's happening is, during netns cleanup, nf_nat_net_exit gets called before ipv4_net_exit. As I understand it, nf_nat_net_exit is supposed to kill any conntrack entries which have NAT context (through nf_ct_iterate_cleanup), but for some reason this doesn't happen (perhaps something else is still holding refs to those entries?). When ipv4_net_exit is called, conntrack entries (including those with NAT context) are cleaned up, but the nat_bysource hashtable is long gone - freed in nf_nat_net_exit. The bug happens when attempting to free a conntrack entry whose NAT hash 'prev' field points to a slot in the freed hash table (head for that bin). We ignore conntracks with null nat bindings. But this is wrong, as these are in bysource hash table as well. Restore nat-cleaning for the netns-is-being-removed case. bug: https://bugzilla.kernel.org/show_bug.cgi?id=65191 Fixes: c2d421e1718 ('netfilter: nf_nat: fix race when unloading protocol modules') Reported-by: Samu Kallio <samu.kallio@aberdeencloud.com> Debugged-by: Samu Kallio <samu.kallio@aberdeencloud.com> Signed-off-by: Florian Westphal <fw@strlen.de> Tested-by: Samu Kallio <samu.kallio@aberdeencloud.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09netfilter: ctnetlink: fix dumping of dying/unconfirmed conntracksPablo Neira Ayuso
commit 266155b2de8fb721ae353688529b2f8bcdde2f90 upstream. The dumping prematurely stops, it seems the callback argument that indicates that all entries have been dumped is set after iterating on the first cpu list. The dumping also may stop before the entire per-cpu list content is also dumped. With this patch, conntrack -L dying now shows the dying list content again. Fixes: b7779d06 ("netfilter: conntrack: spinlock per cpu to protect special lists.") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09tty: Correct INPCK handlingPeter Hurley
commit 66528f90669691c85c73bea4f0c9f4a5857c4cab upstream. If INPCK is not set, input parity detection should be disabled. This means parity errors should not be received from the tty driver, and the data received should be treated normally. SUS v3, 11.2.2, General Terminal Interface - Input Modes, states: "If INPCK is set, input parity checking shall be enabled. If INPCK is not set, input parity checking shall be disabled, allowing output parity generation without input parity errors. Note that whether input parity checking is enabled or disabled is independent of whether parity detection is enabled or disabled (see Control Modes). If parity detection is enabled but input parity checking is disabled, the hardware to which the terminal is connected shall recognize the parity bit, but the terminal special file shall not check whether or not this bit is correctly set." Ignore parity errors reported by the tty driver when INPCK is not set, and handle the received data normally. Fixes: Bugzilla #71681, 'Improvement of n_tty_receive_parity_error from n_tty.c' Reported-by: Ivan <athlon_@mail.ru> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09serial: Fix IGNBRK handlingPeter Hurley
commit ef8b9ddcb45fa3b1e11acd72be2398001e807d14 upstream. If IGNBRK is set without either BRKINT or PARMRK set, some uart drivers send a 0x00 byte for BREAK without the TTYBREAK flag to the line discipline, when it should send either nothing or the TTYBREAK flag set. This happens because the read_status_mask masks out the BI condition, which uart_insert_char() then interprets as a normal 0x00 byte. SUS v3 is clear regarding the meaning of IGNBRK; Section 11.2.2, General Terminal Interface - Input Modes, states: "If IGNBRK is set, a break condition detected on input shall be ignored; that is, not put on the input queue and therefore not read by any process." Fix read_status_mask to include the BI bit if IGNBRK is set; the lsr status retains the BI bit if a BREAK is recv'd, which is subsequently ignored in uart_insert_char() when masked with the ignore_status_mask. Affected drivers: 8250 - all serial_txx9 mfd amba-pl010 amba-pl011 atmel_serial bfin_uart dz ip22zilog max310x mxs-auart netx-serial pnx8xxx_uart pxa sb1250-duart sccnxp serial_ks8695 sirfsoc_uart st-asc vr41xx_siu zs sunzilog fsl_lpuart sunsab ucc_uart bcm63xx_uart sunsu efm32-uart pmac_zilog mpsc msm_serial m32r_sio Unaffected drivers: omap-serial rp2 sa1100 imx icom Annotated for fixes: altera_uart mcf Drivers without break detection: 21285 xilinx-uartps altera_jtaguart apbuart arc-uart clps711x max3100 uartlite msm_serial_hs nwpserial lantiq vt8500_serial Unknown: samsung mpc52xx_uart bfin_sport_uart cpm_uart/core Fixes: Bugzilla #71651, '8250_core.c incorrectly handles IGNBRK flag' Reported-by: Ivan <athlon_@mail.ru> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09clk: qcom: Fix mmcc-8974's PLL configurationsStephen Boyd
commit 437ae6a1b8f2eedebfbf0f6572e19ca5c58a3f71 upstream. We forgot to add the status bit for the PLLs and we were using the wrong register and masks for configuration, leading to unexpected PLL configurations. Fix this. Fixes: d8b212014e69 (clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)) Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09clk: qcom: Fix clk_rcg2_is_enabled() checkStephen Boyd
commit aa014149ba002155a084ec1e9328e95b70167cbb upstream. If the bit is set the clock is off so we should be checking for a clear bit, not a set bit. Invert the logic. Fixes: bcd61c0f535a (clk: qcom: Add support for root clock generators (RCGs)) Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09net/mlx4_core: Keep only one driver entry release mlx4_privWei Yang
commit da1de8dfff09d33d4a5345762c21b487028e25f5 upstream. Following commit befdf89 "net/mlx4_core: Preserve pci_dev_data after __mlx4_remove_one()", there are two mlx4 pci callbacks which will attempt to release the mlx4_priv object -- .shutdown and .remove. This leads to a use-after-free access to the already freed mlx4_priv instance and trigger a "Kernel access of bad area" crash when both .shutdown and .remove are called. During reboot or kexec, .shutdown is called, with the VFs probed to the host going through shutdown first and then the PF. Later, the PF will trigger VFs' .remove since VFs still have driver attached. Fix that by keeping only one driver entry which releases mlx4_priv. Fixes: befdf89 ('net/mlx4_core: Preserve pci_dev_data after __mlx4_remove_one()') CC: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09mlx4_core: Fix incorrect FLAGS1 bitmap test in mlx4_QUERY_FUNC_CAPJack Morgenstein
commit bc82878baa10c2a6a4a6affaf52c152935112142 upstream. Commit eb17711bc1d6 ("net/mlx4_core: Introduce nic_info new flag in QUERY_FUNC_CAP") did: if (func_cap->flags1 & QUERY_FUNC_CAP_FLAGS1_OFFSET) { which should be: if (func_cap->flags1 & QUERY_FUNC_CAP_FLAGS1_FORCE_VLAN) { Fix that. Fixes: eb17711bc1d6 ("net/mlx4_core: Introduce nic_info new flag in QUERY_FUNC_CAP") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09ARC: Fix build breakage for !CONFIG_ARC_DW2_UNWINDVineet Gupta
commit ba25915fb2cd18152cb14b144dbe8bf2f2bd8e45 upstream. Fixes: ec7ac6afd07b (ARC: switch to generic ENTRY/END assembler annotations) Reported-by: Anton Kolesov <akolesov@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09irqchip: spear_shirq: Fix interrupt offsetThomas Gleixner
commit 4f4366033945419b0c52118c29d3057d7c558765 upstream. The ras3 block on spear320 claims to have 3 interrupts. In fact it has one and 6 reserved interrupts. Account the 6 reserved to this block so it has 7 interrupts total. That matches the datasheet and the device tree entries. Broken since commit 80515a5a(ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT). Testing is overrated.... Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20140619212712.872379208@linutronix.de Fixes: 80515a5a2e3c ('ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT') Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09md: flush writes before starting a recovery.NeilBrown
commit 133d4527eab8d199a62eee6bd433f0776842df2e upstream. When we write to a degraded array which has a bitmap, we make sure the relevant bit in the bitmap remains set when the write completes (so a 're-add' can quickly rebuilt a temporarily-missing device). If, immediately after such a write starts, we incorporate a spare, commence recovery, and skip over the region where the write is happening (because the 'needs recovery' flag isn't set yet), then that write will not get to the new device. Once the recovery finishes the new device will be trusted, but will have incorrect data, leading to possible corruption. We cannot set the 'needs recovery' flag when we start the write as we do not know easily if the write will be "degraded" or not. That depends on details of the particular raid level and particular write request. This patch fixes a corruption issue of long standing and so it suitable for any -stable kernel. It applied correctly to 3.0 at least and will minor editing to earlier kernels. Reported-by: Bill <billstuff2001@sbcglobal.net> Tested-by: Bill <billstuff2001@sbcglobal.net> Link: http://lkml.kernel.org/r/53A518BB.60709@sbcglobal.net Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09btrfs: only unlock block in verify_parent_transid if we locked itJosef Bacik
commit 472b909ff6f4884d235ef7b9d3847fad5efafbff upstream. This is a regression from my patch a26e8c9f75b0bfd8cccc9e8f110737b136eb5994, we need to only unlock the block if we were the one who locked it. Otherwise this will trip BUG_ON()'s in locking.c Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09tracing/uprobes: Fix the usage of uprobe_buffer_enable() in probe_event_enable()Oleg Nesterov
commit fb6bab6a5ad46d00b5ffa22268f21df1cd7c59df upstream. The usage of uprobe_buffer_enable() added by dcad1a20 is very wrong, 1. uprobe_buffer_enable() and uprobe_buffer_disable() are not balanced, _enable() should be called only if !enabled. 2. If uprobe_buffer_enable() fails probe_event_enable() should clear tp.flags and free event_file_link. 3. If uprobe_register() fails it should do uprobe_buffer_disable(). Link: http://lkml.kernel.org/p/20140627170146.GA18332@redhat.com Acked-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Fixes: dcad1a204f72 "tracing/uprobes: Fetch args before reserving a ring buffer" Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 01:16:02 +0000