diff options
Diffstat (limited to 'drivers/net/ethernet/intel/igc/igc_phy.c')
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_phy.c | 206 |
1 files changed, 108 insertions, 98 deletions
diff --git a/drivers/net/ethernet/intel/igc/igc_phy.c b/drivers/net/ethernet/intel/igc/igc_phy.c index 4c8f96a9a148..8e1799508edc 100644 --- a/drivers/net/ethernet/intel/igc/igc_phy.c +++ b/drivers/net/ethernet/intel/igc/igc_phy.c @@ -3,10 +3,6 @@ #include "igc_phy.h" -/* forward declaration */ -static s32 igc_phy_setup_autoneg(struct igc_hw *hw); -static s32 igc_wait_autoneg(struct igc_hw *hw); - /** * igc_check_reset_block - Check if PHY reset is blocked * @hw: pointer to the HW structure @@ -177,6 +173,7 @@ s32 igc_check_downshift(struct igc_hw *hw) s32 igc_phy_hw_reset(struct igc_hw *hw) { struct igc_phy_info *phy = &hw->phy; + u32 phpm = 0, timeout = 10000; s32 ret_val; u32 ctrl; @@ -190,6 +187,8 @@ s32 igc_phy_hw_reset(struct igc_hw *hw) if (ret_val) goto out; + phpm = rd32(IGC_I225_PHPM); + ctrl = rd32(IGC_CTRL); wr32(IGC_CTRL, ctrl | IGC_CTRL_PHY_RST); wrfl(); @@ -199,109 +198,26 @@ s32 igc_phy_hw_reset(struct igc_hw *hw) wr32(IGC_CTRL, ctrl); wrfl(); - usleep_range(1500, 2000); - - phy->ops.release(hw); - -out: - return ret_val; -} - -/** - * igc_copper_link_autoneg - Setup/Enable autoneg for copper link - * @hw: pointer to the HW structure - * - * Performs initial bounds checking on autoneg advertisement parameter, then - * configure to advertise the full capability. Setup the PHY to autoneg - * and restart the negotiation process between the link partner. If - * autoneg_wait_to_complete, then wait for autoneg to complete before exiting. - */ -static s32 igc_copper_link_autoneg(struct igc_hw *hw) -{ - struct igc_phy_info *phy = &hw->phy; - u16 phy_ctrl; - s32 ret_val; - - /* Perform some bounds checking on the autoneg advertisement - * parameter. - */ - phy->autoneg_advertised &= phy->autoneg_mask; - - /* If autoneg_advertised is zero, we assume it was not defaulted - * by the calling code so we set to advertise full capability. - */ - if (phy->autoneg_advertised == 0) - phy->autoneg_advertised = phy->autoneg_mask; + /* SW should guarantee 100us for the completion of the PHY reset */ + usleep_range(100, 150); + do { + phpm = rd32(IGC_I225_PHPM); + timeout--; + udelay(1); + } while (!(phpm & IGC_PHY_RST_COMP) && timeout); - hw_dbg("Reconfiguring auto-neg advertisement params\n"); - ret_val = igc_phy_setup_autoneg(hw); - if (ret_val) { - hw_dbg("Error Setting up Auto-Negotiation\n"); - goto out; - } - hw_dbg("Restarting Auto-Neg\n"); + if (!timeout) + hw_dbg("Timeout is expired after a phy reset\n"); - /* Restart auto-negotiation by setting the Auto Neg Enable bit and - * the Auto Neg Restart bit in the PHY control register. - */ - ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl); - if (ret_val) - goto out; + usleep_range(100, 150); - phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); - ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl); - if (ret_val) - goto out; - - /* Does the user want to wait for Auto-Neg to complete here, or - * check at a later time (for example, callback routine). - */ - if (phy->autoneg_wait_to_complete) { - ret_val = igc_wait_autoneg(hw); - if (ret_val) { - hw_dbg("Error while waiting for autoneg to complete\n"); - goto out; - } - } - - hw->mac.get_link_status = true; + phy->ops.release(hw); out: return ret_val; } /** - * igc_wait_autoneg - Wait for auto-neg completion - * @hw: pointer to the HW structure - * - * Waits for auto-negotiation to complete or for the auto-negotiation time - * limit to expire, which ever happens first. - */ -static s32 igc_wait_autoneg(struct igc_hw *hw) -{ - u16 i, phy_status; - s32 ret_val = 0; - - /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */ - for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) { - ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); - if (ret_val) - break; - ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); - if (ret_val) - break; - if (phy_status & MII_SR_AUTONEG_COMPLETE) - break; - msleep(100); - } - - /* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation - * has completed. - */ - return ret_val; -} - -/** * igc_phy_setup_autoneg - Configure PHY for auto-negotiation * @hw: pointer to the HW structure * @@ -486,6 +402,100 @@ static s32 igc_phy_setup_autoneg(struct igc_hw *hw) } /** + * igc_wait_autoneg - Wait for auto-neg completion + * @hw: pointer to the HW structure + * + * Waits for auto-negotiation to complete or for the auto-negotiation time + * limit to expire, which ever happens first. + */ +static s32 igc_wait_autoneg(struct igc_hw *hw) +{ + u16 i, phy_status; + s32 ret_val = 0; + + /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */ + for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) { + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + if (phy_status & MII_SR_AUTONEG_COMPLETE) + break; + msleep(100); + } + + /* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation + * has completed. + */ + return ret_val; +} + +/** + * igc_copper_link_autoneg - Setup/Enable autoneg for copper link + * @hw: pointer to the HW structure + * + * Performs initial bounds checking on autoneg advertisement parameter, then + * configure to advertise the full capability. Setup the PHY to autoneg + * and restart the negotiation process between the link partner. If + * autoneg_wait_to_complete, then wait for autoneg to complete before exiting. + */ +static s32 igc_copper_link_autoneg(struct igc_hw *hw) +{ + struct igc_phy_info *phy = &hw->phy; + u16 phy_ctrl; + s32 ret_val; + + /* Perform some bounds checking on the autoneg advertisement + * parameter. + */ + phy->autoneg_advertised &= phy->autoneg_mask; + + /* If autoneg_advertised is zero, we assume it was not defaulted + * by the calling code so we set to advertise full capability. + */ + if (phy->autoneg_advertised == 0) + phy->autoneg_advertised = phy->autoneg_mask; + + hw_dbg("Reconfiguring auto-neg advertisement params\n"); + ret_val = igc_phy_setup_autoneg(hw); + if (ret_val) { + hw_dbg("Error Setting up Auto-Negotiation\n"); + goto out; + } + hw_dbg("Restarting Auto-Neg\n"); + + /* Restart auto-negotiation by setting the Auto Neg Enable bit and + * the Auto Neg Restart bit in the PHY control register. + */ + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl); + if (ret_val) + goto out; + + phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl); + if (ret_val) + goto out; + + /* Does the user want to wait for Auto-Neg to complete here, or + * check at a later time (for example, callback routine). + */ + if (phy->autoneg_wait_to_complete) { + ret_val = igc_wait_autoneg(hw); + if (ret_val) { + hw_dbg("Error while waiting for autoneg to complete\n"); + goto out; + } + } + + hw->mac.get_link_status = true; + +out: + return ret_val; +} + +/** * igc_setup_copper_link - Configure copper link settings * @hw: pointer to the HW structure * |