summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/rtl8366rb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/rtl8366rb.c')
-rw-r--r--drivers/net/dsa/rtl8366rb.c301
1 files changed, 284 insertions, 17 deletions
diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
index a89093bc6c6a..03deacd83e61 100644
--- a/drivers/net/dsa/rtl8366rb.c
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -14,6 +14,7 @@
#include <linux/bitops.h>
#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
#include <linux/irqchip/chained_irq.h>
@@ -42,9 +43,12 @@
/* Port Enable Control register */
#define RTL8366RB_PECR 0x0001
-/* Switch Security Control registers */
-#define RTL8366RB_SSCR0 0x0002
-#define RTL8366RB_SSCR1 0x0003
+/* Switch per-port learning disablement register */
+#define RTL8366RB_PORT_LEARNDIS_CTRL 0x0002
+
+/* Security control, actually aging register */
+#define RTL8366RB_SECURITY_CTRL 0x0003
+
#define RTL8366RB_SSCR2 0x0004
#define RTL8366RB_SSCR2_DROP_UNKNOWN_DA BIT(0)
@@ -106,6 +110,18 @@
#define RTL8366RB_POWER_SAVING_REG 0x0021
+/* Spanning tree status (STP) control, two bits per port per FID */
+#define RTL8366RB_STP_STATE_BASE 0x0050 /* 0x0050..0x0057 */
+#define RTL8366RB_STP_STATE_DISABLED 0x0
+#define RTL8366RB_STP_STATE_BLOCKING 0x1
+#define RTL8366RB_STP_STATE_LEARNING 0x2
+#define RTL8366RB_STP_STATE_FORWARDING 0x3
+#define RTL8366RB_STP_MASK GENMASK(1, 0)
+#define RTL8366RB_STP_STATE(port, state) \
+ ((state) << ((port) * 2))
+#define RTL8366RB_STP_STATE_MASK(port) \
+ RTL8366RB_STP_STATE((port), RTL8366RB_STP_MASK)
+
/* CPU port control reg */
#define RTL8368RB_CPU_CTRL_REG 0x0061
#define RTL8368RB_CPU_PORTS_MSK 0x00FF
@@ -143,6 +159,21 @@
#define RTL8366RB_PHY_NO_OFFSET 9
#define RTL8366RB_PHY_NO_MASK (0x1f << 9)
+/* VLAN Ingress Control Register 1, one bit per port.
+ * bit 0 .. 5 will make the switch drop ingress frames without
+ * VID such as untagged or priority-tagged frames for respective
+ * port.
+ * bit 6 .. 11 will make the switch drop ingress frames carrying
+ * a C-tag with VID != 0 for respective port.
+ */
+#define RTL8366RB_VLAN_INGRESS_CTRL1_REG 0x037E
+#define RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) (BIT((port)) | BIT((port) + 6))
+
+/* VLAN Ingress Control Register 2, one bit per port.
+ * bit0 .. bit5 will make the switch drop all ingress frames with
+ * a VLAN classification that does not include the port is in its
+ * member set.
+ */
#define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f
/* LED control registers */
@@ -215,6 +246,7 @@
#define RTL8366RB_NUM_LEDGROUPS 4
#define RTL8366RB_NUM_VIDS 4096
#define RTL8366RB_PRIORITYMAX 7
+#define RTL8366RB_NUM_FIDS 8
#define RTL8366RB_FIDMAX 7
#define RTL8366RB_PORT_1 BIT(0) /* In userspace port 0 */
@@ -300,6 +332,13 @@
#define RTL8366RB_INTERRUPT_STATUS_REG 0x0442
#define RTL8366RB_NUM_INTERRUPT 14 /* 0..13 */
+/* Port isolation registers */
+#define RTL8366RB_PORT_ISO_BASE 0x0F08
+#define RTL8366RB_PORT_ISO(pnum) (RTL8366RB_PORT_ISO_BASE + (pnum))
+#define RTL8366RB_PORT_ISO_EN BIT(0)
+#define RTL8366RB_PORT_ISO_PORTS_MASK GENMASK(7, 1)
+#define RTL8366RB_PORT_ISO_PORTS(pmask) ((pmask) << 1)
+
/* bits 0..5 enable force when cleared */
#define RTL8366RB_MAC_FORCE_CTRL_REG 0x0F11
@@ -314,9 +353,11 @@
/**
* struct rtl8366rb - RTL8366RB-specific data
* @max_mtu: per-port max MTU setting
+ * @pvid_enabled: if PVID is set for respective port
*/
struct rtl8366rb {
unsigned int max_mtu[RTL8366RB_NUM_PORTS];
+ bool pvid_enabled[RTL8366RB_NUM_PORTS];
};
static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = {
@@ -835,6 +876,21 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
if (ret)
return ret;
+ /* Isolate all user ports so they can only send packets to itself and the CPU port */
+ for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+ ret = regmap_write(smi->map, RTL8366RB_PORT_ISO(i),
+ RTL8366RB_PORT_ISO_PORTS(BIT(RTL8366RB_PORT_NUM_CPU)) |
+ RTL8366RB_PORT_ISO_EN);
+ if (ret)
+ return ret;
+ }
+ /* CPU port can send packets to all ports */
+ ret = regmap_write(smi->map, RTL8366RB_PORT_ISO(RTL8366RB_PORT_NUM_CPU),
+ RTL8366RB_PORT_ISO_PORTS(dsa_user_ports(ds)) |
+ RTL8366RB_PORT_ISO_EN);
+ if (ret)
+ return ret;
+
/* Set up the "green ethernet" feature */
ret = rtl8366rb_jam_table(rtl8366rb_green_jam,
ARRAY_SIZE(rtl8366rb_green_jam), smi, false);
@@ -888,13 +944,14 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
/* layer 2 size, see rtl8366rb_change_mtu() */
rb->max_mtu[i] = 1532;
- /* Enable learning for all ports */
- ret = regmap_write(smi->map, RTL8366RB_SSCR0, 0);
+ /* Disable learning for all ports */
+ ret = regmap_write(smi->map, RTL8366RB_PORT_LEARNDIS_CTRL,
+ RTL8366RB_PORT_ALL);
if (ret)
return ret;
/* Enable auto ageing for all ports */
- ret = regmap_write(smi->map, RTL8366RB_SSCR1, 0);
+ ret = regmap_write(smi->map, RTL8366RB_SECURITY_CTRL, 0);
if (ret)
return ret;
@@ -911,11 +968,13 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
if (ret)
return ret;
- /* Discard VLAN tagged packets if the port is not a member of
- * the VLAN with which the packets is associated.
- */
+ /* Accept all packets by default, we enable filtering on-demand */
+ ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG,
+ 0);
+ if (ret)
+ return ret;
ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
- RTL8366RB_PORT_ALL);
+ 0);
if (ret)
return ret;
@@ -963,7 +1022,7 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
return ret;
}
- ret = rtl8366_init_vlan(smi);
+ ret = rtl8366_reset_vlan(smi);
if (ret)
return ret;
@@ -977,8 +1036,6 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
return -ENODEV;
}
- ds->configure_vlan_while_not_filtering = false;
-
return 0;
}
@@ -1127,6 +1184,190 @@ rtl8366rb_port_disable(struct dsa_switch *ds, int port)
rb8366rb_set_port_led(smi, port, false);
}
+static int
+rtl8366rb_port_bridge_join(struct dsa_switch *ds, int port,
+ struct net_device *bridge)
+{
+ struct realtek_smi *smi = ds->priv;
+ unsigned int port_bitmap = 0;
+ int ret, i;
+
+ /* Loop over all other ports than the current one */
+ for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+ /* Current port handled last */
+ if (i == port)
+ continue;
+ /* Not on this bridge */
+ if (dsa_to_port(ds, i)->bridge_dev != bridge)
+ continue;
+ /* Join this port to each other port on the bridge */
+ ret = regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(i),
+ RTL8366RB_PORT_ISO_PORTS(BIT(port)),
+ RTL8366RB_PORT_ISO_PORTS(BIT(port)));
+ if (ret)
+ dev_err(smi->dev, "failed to join port %d\n", port);
+
+ port_bitmap |= BIT(i);
+ }
+
+ /* Set the bits for the ports we can access */
+ return regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(port),
+ RTL8366RB_PORT_ISO_PORTS(port_bitmap),
+ RTL8366RB_PORT_ISO_PORTS(port_bitmap));
+}
+
+static void
+rtl8366rb_port_bridge_leave(struct dsa_switch *ds, int port,
+ struct net_device *bridge)
+{
+ struct realtek_smi *smi = ds->priv;
+ unsigned int port_bitmap = 0;
+ int ret, i;
+
+ /* Loop over all other ports than this one */
+ for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+ /* Current port handled last */
+ if (i == port)
+ continue;
+ /* Not on this bridge */
+ if (dsa_to_port(ds, i)->bridge_dev != bridge)
+ continue;
+ /* Remove this port from any other port on the bridge */
+ ret = regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(i),
+ RTL8366RB_PORT_ISO_PORTS(BIT(port)), 0);
+ if (ret)
+ dev_err(smi->dev, "failed to leave port %d\n", port);
+
+ port_bitmap |= BIT(i);
+ }
+
+ /* Clear the bits for the ports we can not access, leave ourselves */
+ regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(port),
+ RTL8366RB_PORT_ISO_PORTS(port_bitmap), 0);
+}
+
+/**
+ * rtl8366rb_drop_untagged() - make the switch drop untagged and C-tagged frames
+ * @smi: SMI state container
+ * @port: the port to drop untagged and C-tagged frames on
+ * @drop: whether to drop or pass untagged and C-tagged frames
+ */
+static int rtl8366rb_drop_untagged(struct realtek_smi *smi, int port, bool drop)
+{
+ return regmap_update_bits(smi->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG,
+ RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port),
+ drop ? RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) : 0);
+}
+
+static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port,
+ bool vlan_filtering,
+ struct netlink_ext_ack *extack)
+{
+ struct realtek_smi *smi = ds->priv;
+ struct rtl8366rb *rb;
+ int ret;
+
+ rb = smi->chip_data;
+
+ dev_dbg(smi->dev, "port %d: %s VLAN filtering\n", port,
+ vlan_filtering ? "enable" : "disable");
+
+ /* If the port is not in the member set, the frame will be dropped */
+ ret = regmap_update_bits(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
+ BIT(port), vlan_filtering ? BIT(port) : 0);
+ if (ret)
+ return ret;
+
+ /* If VLAN filtering is enabled and PVID is also enabled, we must
+ * not drop any untagged or C-tagged frames. If we turn off VLAN
+ * filtering on a port, we need to accept any frames.
+ */
+ if (vlan_filtering)
+ ret = rtl8366rb_drop_untagged(smi, port, !rb->pvid_enabled[port]);
+ else
+ ret = rtl8366rb_drop_untagged(smi, port, false);
+
+ return ret;
+}
+
+static int
+rtl8366rb_port_pre_bridge_flags(struct dsa_switch *ds, int port,
+ struct switchdev_brport_flags flags,
+ struct netlink_ext_ack *extack)
+{
+ /* We support enabling/disabling learning */
+ if (flags.mask & ~(BR_LEARNING))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int
+rtl8366rb_port_bridge_flags(struct dsa_switch *ds, int port,
+ struct switchdev_brport_flags flags,
+ struct netlink_ext_ack *extack)
+{
+ struct realtek_smi *smi = ds->priv;
+ int ret;
+
+ if (flags.mask & BR_LEARNING) {
+ ret = regmap_update_bits(smi->map, RTL8366RB_PORT_LEARNDIS_CTRL,
+ BIT(port),
+ (flags.val & BR_LEARNING) ? 0 : BIT(port));
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static void
+rtl8366rb_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
+{
+ struct realtek_smi *smi = ds->priv;
+ u32 val;
+ int i;
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ val = RTL8366RB_STP_STATE_DISABLED;
+ break;
+ case BR_STATE_BLOCKING:
+ case BR_STATE_LISTENING:
+ val = RTL8366RB_STP_STATE_BLOCKING;
+ break;
+ case BR_STATE_LEARNING:
+ val = RTL8366RB_STP_STATE_LEARNING;
+ break;
+ case BR_STATE_FORWARDING:
+ val = RTL8366RB_STP_STATE_FORWARDING;
+ break;
+ default:
+ dev_err(smi->dev, "unknown bridge state requested\n");
+ return;
+ }
+
+ /* Set the same status for the port on all the FIDs */
+ for (i = 0; i < RTL8366RB_NUM_FIDS; i++) {
+ regmap_update_bits(smi->map, RTL8366RB_STP_STATE_BASE + i,
+ RTL8366RB_STP_STATE_MASK(port),
+ RTL8366RB_STP_STATE(port, val));
+ }
+}
+
+static void
+rtl8366rb_port_fast_age(struct dsa_switch *ds, int port)
+{
+ struct realtek_smi *smi = ds->priv;
+
+ /* This will age out any learned L2 entries */
+ regmap_update_bits(smi->map, RTL8366RB_SECURITY_CTRL,
+ BIT(port), BIT(port));
+ /* Restore the normal state of things */
+ regmap_update_bits(smi->map, RTL8366RB_SECURITY_CTRL,
+ BIT(port), 0);
+}
+
static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
{
struct realtek_smi *smi = ds->priv;
@@ -1338,24 +1579,44 @@ static int rtl8366rb_get_mc_index(struct realtek_smi *smi, int port, int *val)
static int rtl8366rb_set_mc_index(struct realtek_smi *smi, int port, int index)
{
+ struct rtl8366rb *rb;
+ bool pvid_enabled;
+ int ret;
+
+ rb = smi->chip_data;
+ pvid_enabled = !!index;
+
if (port >= smi->num_ports || index >= RTL8366RB_NUM_VLANS)
return -EINVAL;
- return regmap_update_bits(smi->map, RTL8366RB_PORT_VLAN_CTRL_REG(port),
+ ret = regmap_update_bits(smi->map, RTL8366RB_PORT_VLAN_CTRL_REG(port),
RTL8366RB_PORT_VLAN_CTRL_MASK <<
RTL8366RB_PORT_VLAN_CTRL_SHIFT(port),
(index & RTL8366RB_PORT_VLAN_CTRL_MASK) <<
RTL8366RB_PORT_VLAN_CTRL_SHIFT(port));
+ if (ret)
+ return ret;
+
+ rb->pvid_enabled[port] = pvid_enabled;
+
+ /* If VLAN filtering is enabled and PVID is also enabled, we must
+ * not drop any untagged or C-tagged frames. Make sure to update the
+ * filtering setting.
+ */
+ if (dsa_port_is_vlan_filtering(dsa_to_port(smi->ds, port)))
+ ret = rtl8366rb_drop_untagged(smi, port, !pvid_enabled);
+
+ return ret;
}
static bool rtl8366rb_is_vlan_valid(struct realtek_smi *smi, unsigned int vlan)
{
- unsigned int max = RTL8366RB_NUM_VLANS;
+ unsigned int max = RTL8366RB_NUM_VLANS - 1;
if (smi->vlan4k_enabled)
max = RTL8366RB_NUM_VIDS - 1;
- if (vlan == 0 || vlan > max)
+ if (vlan > max)
return false;
return true;
@@ -1510,11 +1771,17 @@ static const struct dsa_switch_ops rtl8366rb_switch_ops = {
.get_strings = rtl8366_get_strings,
.get_ethtool_stats = rtl8366_get_ethtool_stats,
.get_sset_count = rtl8366_get_sset_count,
- .port_vlan_filtering = rtl8366_vlan_filtering,
+ .port_bridge_join = rtl8366rb_port_bridge_join,
+ .port_bridge_leave = rtl8366rb_port_bridge_leave,
+ .port_vlan_filtering = rtl8366rb_vlan_filtering,
.port_vlan_add = rtl8366_vlan_add,
.port_vlan_del = rtl8366_vlan_del,
.port_enable = rtl8366rb_port_enable,
.port_disable = rtl8366rb_port_disable,
+ .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags,
+ .port_bridge_flags = rtl8366rb_port_bridge_flags,
+ .port_stp_state_set = rtl8366rb_port_stp_state_set,
+ .port_fast_age = rtl8366rb_port_fast_age,
.port_change_mtu = rtl8366rb_change_mtu,
.port_max_mtu = rtl8366rb_max_mtu,
};
generated by cgit v1.2.3 (git 2.46.0) at 2025-10-31 10:34:55 +0000