diff options
Diffstat (limited to 'drivers/md/dm-raid.c')
| -rw-r--r-- | drivers/md/dm-raid.c | 238 | 
1 files changed, 213 insertions, 25 deletions
| diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c index 9e58dbd8d8cb..1d3fe1a40a9b 100644 --- a/drivers/md/dm-raid.c +++ b/drivers/md/dm-raid.c @@ -91,15 +91,44 @@ static struct raid_type {  	{"raid6_nc", "RAID6 (N continue)",		2, 4, 6, ALGORITHM_ROTATING_N_CONTINUE}  }; +static char *raid10_md_layout_to_format(int layout) +{ +	/* +	 * Bit 16 and 17 stand for "offset" and "use_far_sets" +	 * Refer to MD's raid10.c for details +	 */ +	if ((layout & 0x10000) && (layout & 0x20000)) +		return "offset"; + +	if ((layout & 0xFF) > 1) +		return "near"; + +	return "far"; +} +  static unsigned raid10_md_layout_to_copies(int layout)  { -	return layout & 0xFF; +	if ((layout & 0xFF) > 1) +		return layout & 0xFF; +	return (layout >> 8) & 0xFF;  }  static int raid10_format_to_md_layout(char *format, unsigned copies)  { -	/* 1 "far" copy, and 'copies' "near" copies */ -	return (1 << 8) | (copies & 0xFF); +	unsigned n = 1, f = 1; + +	if (!strcmp("near", format)) +		n = copies; +	else +		f = copies; + +	if (!strcmp("offset", format)) +		return 0x30000 | (f << 8) | n; + +	if (!strcmp("far", format)) +		return 0x20000 | (f << 8) | n; + +	return (f << 8) | n;  }  static struct raid_type *get_raid_type(char *name) @@ -352,6 +381,7 @@ static int validate_raid_redundancy(struct raid_set *rs)  {  	unsigned i, rebuild_cnt = 0;  	unsigned rebuilds_per_group, copies, d; +	unsigned group_size, last_group_start;  	for (i = 0; i < rs->md.raid_disks; i++)  		if (!test_bit(In_sync, &rs->dev[i].rdev.flags) || @@ -379,9 +409,6 @@ static int validate_raid_redundancy(struct raid_set *rs)  		 * as long as the failed devices occur in different mirror  		 * groups (i.e. different stripes).  		 * -		 * Right now, we only allow for "near" copies.  When other -		 * formats are added, we will have to check those too. -		 *  		 * When checking "near" format, make sure no adjacent devices  		 * have failed beyond what can be handled.  In addition to the  		 * simple case where the number of devices is a multiple of the @@ -391,14 +418,41 @@ static int validate_raid_redundancy(struct raid_set *rs)  		 *          A    A    B    B    C  		 *          C    D    D    E    E  		 */ -		for (i = 0; i < rs->md.raid_disks * copies; i++) { -			if (!(i % copies)) +		if (!strcmp("near", raid10_md_layout_to_format(rs->md.layout))) { +			for (i = 0; i < rs->md.raid_disks * copies; i++) { +				if (!(i % copies)) +					rebuilds_per_group = 0; +				d = i % rs->md.raid_disks; +				if ((!rs->dev[d].rdev.sb_page || +				     !test_bit(In_sync, &rs->dev[d].rdev.flags)) && +				    (++rebuilds_per_group >= copies)) +					goto too_many; +			} +			break; +		} + +		/* +		 * When checking "far" and "offset" formats, we need to ensure +		 * that the device that holds its copy is not also dead or +		 * being rebuilt.  (Note that "far" and "offset" formats only +		 * support two copies right now.  These formats also only ever +		 * use the 'use_far_sets' variant.) +		 * +		 * This check is somewhat complicated by the need to account +		 * for arrays that are not a multiple of (far) copies.  This +		 * results in the need to treat the last (potentially larger) +		 * set differently. +		 */ +		group_size = (rs->md.raid_disks / copies); +		last_group_start = (rs->md.raid_disks / group_size) - 1; +		last_group_start *= group_size; +		for (i = 0; i < rs->md.raid_disks; i++) { +			if (!(i % copies) && !(i > last_group_start))  				rebuilds_per_group = 0; -			d = i % rs->md.raid_disks; -			if ((!rs->dev[d].rdev.sb_page || -			     !test_bit(In_sync, &rs->dev[d].rdev.flags)) && +			if ((!rs->dev[i].rdev.sb_page || +			     !test_bit(In_sync, &rs->dev[i].rdev.flags)) &&  			    (++rebuilds_per_group >= copies)) -				goto too_many; +					goto too_many;  		}  		break;  	default: @@ -433,7 +487,7 @@ too_many:   *   * RAID10-only options:   *    [raid10_copies <# copies>]        Number of copies.  (Default: 2) - *    [raid10_format <near>]            Layout algorithm.  (Default: near) + *    [raid10_format <near|far|offset>] Layout algorithm.  (Default: near)   */  static int parse_raid_params(struct raid_set *rs, char **argv,  			     unsigned num_raid_params) @@ -520,7 +574,9 @@ static int parse_raid_params(struct raid_set *rs, char **argv,  				rs->ti->error = "'raid10_format' is an invalid parameter for this RAID type";  				return -EINVAL;  			} -			if (strcmp("near", argv[i])) { +			if (strcmp("near", argv[i]) && +			    strcmp("far", argv[i]) && +			    strcmp("offset", argv[i])) {  				rs->ti->error = "Invalid 'raid10_format' value given";  				return -EINVAL;  			} @@ -644,6 +700,15 @@ static int parse_raid_params(struct raid_set *rs, char **argv,  			return -EINVAL;  		} +		/* +		 * If the format is not "near", we only support +		 * two copies at the moment. +		 */ +		if (strcmp("near", raid10_format) && (raid10_copies > 2)) { +			rs->ti->error = "Too many copies for given RAID10 format."; +			return -EINVAL; +		} +  		/* (Len * #mirrors) / #devices */  		sectors_per_dev = rs->ti->len * raid10_copies;  		sector_div(sectors_per_dev, rs->md.raid_disks); @@ -854,17 +919,30 @@ static int super_init_validation(struct mddev *mddev, struct md_rdev *rdev)  	/*  	 * Reshaping is not currently allowed  	 */ -	if ((le32_to_cpu(sb->level) != mddev->level) || -	    (le32_to_cpu(sb->layout) != mddev->layout) || -	    (le32_to_cpu(sb->stripe_sectors) != mddev->chunk_sectors)) { -		DMERR("Reshaping arrays not yet supported."); +	if (le32_to_cpu(sb->level) != mddev->level) { +		DMERR("Reshaping arrays not yet supported. (RAID level change)"); +		return -EINVAL; +	} +	if (le32_to_cpu(sb->layout) != mddev->layout) { +		DMERR("Reshaping arrays not yet supported. (RAID layout change)"); +		DMERR("  0x%X vs 0x%X", le32_to_cpu(sb->layout), mddev->layout); +		DMERR("  Old layout: %s w/ %d copies", +		      raid10_md_layout_to_format(le32_to_cpu(sb->layout)), +		      raid10_md_layout_to_copies(le32_to_cpu(sb->layout))); +		DMERR("  New layout: %s w/ %d copies", +		      raid10_md_layout_to_format(mddev->layout), +		      raid10_md_layout_to_copies(mddev->layout)); +		return -EINVAL; +	} +	if (le32_to_cpu(sb->stripe_sectors) != mddev->chunk_sectors) { +		DMERR("Reshaping arrays not yet supported. (stripe sectors change)");  		return -EINVAL;  	}  	/* We can only change the number of devices in RAID1 right now */  	if ((rs->raid_type->level != 1) &&  	    (le32_to_cpu(sb->num_devices) != mddev->raid_disks)) { -		DMERR("Reshaping arrays not yet supported."); +		DMERR("Reshaping arrays not yet supported. (device count change)");  		return -EINVAL;  	} @@ -1151,7 +1229,7 @@ static int raid_ctr(struct dm_target *ti, unsigned argc, char **argv)  	INIT_WORK(&rs->md.event_work, do_table_event);  	ti->private = rs; -	ti->num_flush_requests = 1; +	ti->num_flush_bios = 1;  	mutex_lock(&rs->md.reconfig_mutex);  	ret = md_run(&rs->md); @@ -1201,8 +1279,33 @@ static int raid_map(struct dm_target *ti, struct bio *bio)  	return DM_MAPIO_SUBMITTED;  } -static int raid_status(struct dm_target *ti, status_type_t type, -		       unsigned status_flags, char *result, unsigned maxlen) +static const char *decipher_sync_action(struct mddev *mddev) +{ +	if (test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) +		return "frozen"; + +	if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) || +	    (!mddev->ro && test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))) { +		if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)) +			return "reshape"; + +		if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) { +			if (!test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) +				return "resync"; +			else if (test_bit(MD_RECOVERY_CHECK, &mddev->recovery)) +				return "check"; +			return "repair"; +		} + +		if (test_bit(MD_RECOVERY_RECOVER, &mddev->recovery)) +			return "recover"; +	} + +	return "idle"; +} + +static void raid_status(struct dm_target *ti, status_type_t type, +			unsigned status_flags, char *result, unsigned maxlen)  {  	struct raid_set *rs = ti->private;  	unsigned raid_param_cnt = 1; /* at least 1 for chunksize */ @@ -1220,8 +1323,18 @@ static int raid_status(struct dm_target *ti, status_type_t type,  			sync = rs->md.recovery_cp;  		if (sync >= rs->md.resync_max_sectors) { +			/* +			 * Sync complete. +			 */  			array_in_sync = 1;  			sync = rs->md.resync_max_sectors; +		} else if (test_bit(MD_RECOVERY_REQUESTED, &rs->md.recovery)) { +			/* +			 * If "check" or "repair" is occurring, the array has +			 * undergone and initial sync and the health characters +			 * should not be 'a' anymore. +			 */ +			array_in_sync = 1;  		} else {  			/*  			 * The array may be doing an initial sync, or it may @@ -1233,6 +1346,7 @@ static int raid_status(struct dm_target *ti, status_type_t type,  				if (!test_bit(In_sync, &rs->dev[i].rdev.flags))  					array_in_sync = 1;  		} +  		/*  		 * Status characters:  		 *  'D' = Dead/Failed device @@ -1261,6 +1375,21 @@ static int raid_status(struct dm_target *ti, status_type_t type,  		       (unsigned long long) sync,  		       (unsigned long long) rs->md.resync_max_sectors); +		/* +		 * Sync action: +		 *   See Documentation/device-mapper/dm-raid.c for +		 *   information on each of these states. +		 */ +		DMEMIT(" %s", decipher_sync_action(&rs->md)); + +		/* +		 * resync_mismatches/mismatch_cnt +		 *   This field shows the number of discrepancies found when +		 *   performing a "check" of the array. +		 */ +		DMEMIT(" %llu", +		       (unsigned long long) +		       atomic64_read(&rs->md.resync_mismatches));  		break;  	case STATUSTYPE_TABLE:  		/* The string you would use to construct this array */ @@ -1329,7 +1458,8 @@ static int raid_status(struct dm_target *ti, status_type_t type,  			       raid10_md_layout_to_copies(rs->md.layout));  		if (rs->print_flags & DMPF_RAID10_FORMAT) -			DMEMIT(" raid10_format near"); +			DMEMIT(" raid10_format %s", +			       raid10_md_layout_to_format(rs->md.layout));  		DMEMIT(" %d", rs->md.raid_disks);  		for (i = 0; i < rs->md.raid_disks; i++) { @@ -1344,11 +1474,64 @@ static int raid_status(struct dm_target *ti, status_type_t type,  				DMEMIT(" -");  		}  	} +} + +static int raid_message(struct dm_target *ti, unsigned argc, char **argv) +{ +	struct raid_set *rs = ti->private; +	struct mddev *mddev = &rs->md; + +	if (!strcasecmp(argv[0], "reshape")) { +		DMERR("Reshape not supported."); +		return -EINVAL; +	} + +	if (!mddev->pers || !mddev->pers->sync_request) +		return -EINVAL; + +	if (!strcasecmp(argv[0], "frozen")) +		set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); +	else +		clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); + +	if (!strcasecmp(argv[0], "idle") || !strcasecmp(argv[0], "frozen")) { +		if (mddev->sync_thread) { +			set_bit(MD_RECOVERY_INTR, &mddev->recovery); +			md_reap_sync_thread(mddev); +		} +	} else if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) || +		   test_bit(MD_RECOVERY_NEEDED, &mddev->recovery)) +		return -EBUSY; +	else if (!strcasecmp(argv[0], "resync")) +		set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); +	else if (!strcasecmp(argv[0], "recover")) { +		set_bit(MD_RECOVERY_RECOVER, &mddev->recovery); +		set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); +	} else { +		if (!strcasecmp(argv[0], "check")) +			set_bit(MD_RECOVERY_CHECK, &mddev->recovery); +		else if (!!strcasecmp(argv[0], "repair")) +			return -EINVAL; +		set_bit(MD_RECOVERY_REQUESTED, &mddev->recovery); +		set_bit(MD_RECOVERY_SYNC, &mddev->recovery); +	} +	if (mddev->ro == 2) { +		/* A write to sync_action is enough to justify +		 * canceling read-auto mode +		 */ +		mddev->ro = 0; +		if (!mddev->suspended) +			md_wakeup_thread(mddev->sync_thread); +	} +	set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); +	if (!mddev->suspended) +		md_wakeup_thread(mddev->thread);  	return 0;  } -static int raid_iterate_devices(struct dm_target *ti, iterate_devices_callout_fn fn, void *data) +static int raid_iterate_devices(struct dm_target *ti, +				iterate_devices_callout_fn fn, void *data)  {  	struct raid_set *rs = ti->private;  	unsigned i; @@ -1405,12 +1588,13 @@ static void raid_resume(struct dm_target *ti)  static struct target_type raid_target = {  	.name = "raid", -	.version = {1, 4, 1}, +	.version = {1, 5, 0},  	.module = THIS_MODULE,  	.ctr = raid_ctr,  	.dtr = raid_dtr,  	.map = raid_map,  	.status = raid_status, +	.message = raid_message,  	.iterate_devices = raid_iterate_devices,  	.io_hints = raid_io_hints,  	.presuspend = raid_presuspend, @@ -1420,6 +1604,10 @@ static struct target_type raid_target = {  static int __init dm_raid_init(void)  { +	DMINFO("Loading target version %u.%u.%u", +	       raid_target.version[0], +	       raid_target.version[1], +	       raid_target.version[2]);  	return dm_register_target(&raid_target);  } | 
