diff options
| -rw-r--r-- | Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml | 4 | ||||
| -rw-r--r-- | MAINTAINERS | 1 | ||||
| -rw-r--r-- | drivers/pci/controller/pcie-brcmstb.c | 33 |
3 files changed, 31 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml index c4f9674e8695d..812ef5957cfcd 100644 --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -107,6 +107,10 @@ properties: - const: bridge - const: swinit + num-lanes: + default: 1 + maximum: 4 + required: - compatible - reg diff --git a/MAINTAINERS b/MAINTAINERS index 0de111385acc1..a8771cb01907e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5085,7 +5085,6 @@ F: include/linux/platform_data/brcmnand.h BROADCOM STB PCIE DRIVER M: Jim Quinlan <jim2101024@gmail.com> -M: Nicolas Saenz Julienne <nsaenz@kernel.org> M: Florian Fainelli <florian.fainelli@broadcom.com> R: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com> L: linux-pci@vger.kernel.org diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index 912a3cf861340..b664d8bcd198d 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -47,6 +47,7 @@ #define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK 0xffffff #define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY 0x04dc +#define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_MAX_LINK_WIDTH_MASK 0x1f0 #define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK 0xc00 #define PCIE_RC_CFG_PRIV1_ROOT_CAP 0x4f8 @@ -56,6 +57,9 @@ #define PCIE_RC_DL_MDIO_WR_DATA 0x1104 #define PCIE_RC_DL_MDIO_RD_DATA 0x1108 +#define PCIE_RC_PL_REG_PHY_CTL_1 0x1804 +#define PCIE_RC_PL_REG_PHY_CTL_1_REG_P2_POWERDOWN_ENA_NOSYNC_MASK 0x8 + #define PCIE_RC_PL_PHY_CTL_15 0x184c #define PCIE_RC_PL_PHY_CTL_15_DIS_PLL_PD_MASK 0x400000 #define PCIE_RC_PL_PHY_CTL_15_PM_CLK_PERIOD_MASK 0xff @@ -1071,7 +1075,7 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) void __iomem *base = pcie->base; struct pci_host_bridge *bridge; struct resource_entry *entry; - u32 tmp, burst, aspm_support; + u32 tmp, burst, aspm_support, num_lanes, num_lanes_cap; u8 num_out_wins = 0; int num_inbound_wins = 0; int memc, ret; @@ -1179,6 +1183,27 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK); writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY); + /* 'tmp' still holds the contents of PRIV1_LINK_CAPABILITY */ + num_lanes_cap = u32_get_bits(tmp, PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_MAX_LINK_WIDTH_MASK); + num_lanes = 0; + + /* + * Use hardware negotiated Max Link Width value by default. If the + * "num-lanes" DT property is present, assume that the chip's default + * link width capability information is incorrect/undesired and use the + * specified value instead. + */ + if (!of_property_read_u32(pcie->np, "num-lanes", &num_lanes) && + num_lanes && num_lanes <= 4 && num_lanes_cap != num_lanes) { + u32p_replace_bits(&tmp, num_lanes, + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_MAX_LINK_WIDTH_MASK); + writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY); + tmp = readl(base + PCIE_RC_PL_REG_PHY_CTL_1); + u32p_replace_bits(&tmp, 1, + PCIE_RC_PL_REG_PHY_CTL_1_REG_P2_POWERDOWN_ENA_NOSYNC_MASK); + writel(tmp, base + PCIE_RC_PL_REG_PHY_CTL_1); + } + /* * For config space accesses on the RC, show the right class for * a PCIe-PCIe bridge (the default setting is to be EP mode). @@ -1332,11 +1357,7 @@ static int brcm_pcie_start_link(struct brcm_pcie *pcie) if (ret) return ret; - /* - * Wait for 100ms after PERST# deassertion; see PCIe CEM specification - * sections 2.2, PCIe r5.0, 6.6.1. - */ - msleep(100); + msleep(PCIE_RESET_CONFIG_WAIT_MS); /* * Give the RC/EP even more time to wake up, before trying to |