diff options
| -rw-r--r-- | drivers/net/netconsole.c | 67 | ||||
| -rw-r--r-- | tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh | 27 | ||||
| -rwxr-xr-x | tools/testing/selftests/drivers/net/netcons_basic.sh | 50 |
3 files changed, 112 insertions, 32 deletions
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index 4289ccd3e41b..21077aff061c 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -86,10 +86,10 @@ static DEFINE_SPINLOCK(target_list_lock); static DEFINE_MUTEX(target_cleanup_list_lock); /* - * Console driver for extended netconsoles. Registered on the first use to - * avoid unnecessarily enabling ext message formatting. + * Console driver for netconsoles. Register only consoles that have + * an associated target of the same type. */ -static struct console netconsole_ext; +static struct console netconsole_ext, netconsole; struct netconsole_target_stats { u64_stats_t xmit_drop_count; @@ -97,6 +97,11 @@ struct netconsole_target_stats { struct u64_stats_sync syncp; }; +enum console_type { + CONS_BASIC = BIT(0), + CONS_EXTENDED = BIT(1), +}; + /* Features enabled in sysdata. Contrary to userdata, this data is populated by * the kernel. The fields are designed as bitwise flags, allowing multiple * features to be set in sysdata_fields. @@ -455,6 +460,33 @@ static ssize_t sysdata_release_enabled_show(struct config_item *item, return sysfs_emit(buf, "%d\n", release_enabled); } +/* Iterate in the list of target, and make sure we don't have any console + * register without targets of the same type + */ +static void unregister_netcons_consoles(void) +{ + struct netconsole_target *nt; + u32 console_type_needed = 0; + unsigned long flags; + + spin_lock_irqsave(&target_list_lock, flags); + list_for_each_entry(nt, &target_list, list) { + if (nt->extended) + console_type_needed |= CONS_EXTENDED; + else + console_type_needed |= CONS_BASIC; + } + spin_unlock_irqrestore(&target_list_lock, flags); + + if (!(console_type_needed & CONS_EXTENDED) && + console_is_registered(&netconsole_ext)) + unregister_console(&netconsole_ext); + + if (!(console_type_needed & CONS_BASIC) && + console_is_registered(&netconsole)) + unregister_console(&netconsole); +} + /* * This one is special -- targets created through the configfs interface * are not enabled (and the corresponding netpoll activated) by default. @@ -488,8 +520,18 @@ static ssize_t enabled_store(struct config_item *item, goto out_unlock; } - if (nt->extended && !console_is_registered(&netconsole_ext)) + if (nt->extended && !console_is_registered(&netconsole_ext)) { + netconsole_ext.flags |= CON_ENABLED; register_console(&netconsole_ext); + } + + /* User might be enabling the basic format target for the very + * first time, make sure the console is registered. + */ + if (!nt->extended && !console_is_registered(&netconsole)) { + netconsole.flags |= CON_ENABLED; + register_console(&netconsole); + } /* * Skip netpoll_parse_options() -- all the attributes are @@ -517,6 +559,10 @@ static ssize_t enabled_store(struct config_item *item, list_move(&nt->list, &target_cleanup_list); spin_unlock_irqrestore(&target_list_lock, flags); mutex_unlock(&target_cleanup_list_lock); + /* Unregister consoles, whose the last target of that type got + * disabled. + */ + unregister_netcons_consoles(); } ret = strnlen(buf, count); @@ -1691,8 +1737,8 @@ static int __init init_netconsole(void) { int err; struct netconsole_target *nt, *tmp; + u32 console_type_needed = 0; unsigned int count = 0; - bool extended = false; unsigned long flags; char *target_config; char *input = config; @@ -1708,9 +1754,10 @@ static int __init init_netconsole(void) } /* Dump existing printks when we register */ if (nt->extended) { - extended = true; + console_type_needed |= CONS_EXTENDED; netconsole_ext.flags |= CON_PRINTBUFFER; } else { + console_type_needed |= CONS_BASIC; netconsole.flags |= CON_PRINTBUFFER; } @@ -1729,9 +1776,10 @@ static int __init init_netconsole(void) if (err) goto undonotifier; - if (extended) + if (console_type_needed & CONS_EXTENDED) register_console(&netconsole_ext); - register_console(&netconsole); + if (console_type_needed & CONS_BASIC) + register_console(&netconsole); pr_info("network logging started\n"); return err; @@ -1761,7 +1809,8 @@ static void __exit cleanup_netconsole(void) if (console_is_registered(&netconsole_ext)) unregister_console(&netconsole_ext); - unregister_console(&netconsole); + if (console_is_registered(&netconsole)) + unregister_console(&netconsole); dynamic_netconsole_exit(); unregister_netdevice_notifier(&netconsole_netdev_notifier); diff --git a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh index 29b01b8e2215..71a5a8b1712c 100644 --- a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh +++ b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh @@ -95,6 +95,8 @@ function set_network() { } function create_dynamic_target() { + local FORMAT=${1:-"extended"} + DSTMAC=$(ip netns exec "${NAMESPACE}" \ ip link show "${DSTIF}" | awk '/ether/ {print $2}') @@ -106,6 +108,16 @@ function create_dynamic_target() { echo "${DSTMAC}" > "${NETCONS_PATH}"/remote_mac echo "${SRCIF}" > "${NETCONS_PATH}"/dev_name + if [ "${FORMAT}" == "basic" ] + then + # Basic target does not support release + echo 0 > "${NETCONS_PATH}"/release + echo 0 > "${NETCONS_PATH}"/extended + elif [ "${FORMAT}" == "extended" ] + then + echo 1 > "${NETCONS_PATH}"/extended + fi + echo 1 > "${NETCONS_PATH}"/enabled } @@ -159,6 +171,7 @@ function listen_port_and_save_to() { function validate_result() { local TMPFILENAME="$1" + local FORMAT=${2:-"extended"} # TMPFILENAME will contain something like: # 6.11.1-0_fbk0_rc13_509_g30d75cea12f7,13,1822,115075213798,-;netconsole selftest: netcons_gtJHM @@ -176,16 +189,20 @@ function validate_result() { exit "${ksft_fail}" fi - if ! grep -q "${USERDATA_KEY}=${USERDATA_VALUE}" "${TMPFILENAME}"; then - echo "FAIL: ${USERDATA_KEY}=${USERDATA_VALUE} not found in ${TMPFILENAME}" >&2 - cat "${TMPFILENAME}" >&2 - exit "${ksft_fail}" + # userdata is not supported on basic format target, + # thus, do not validate it. + if [ "${FORMAT}" != "basic" ]; + then + if ! grep -q "${USERDATA_KEY}=${USERDATA_VALUE}" "${TMPFILENAME}"; then + echo "FAIL: ${USERDATA_KEY}=${USERDATA_VALUE} not found in ${TMPFILENAME}" >&2 + cat "${TMPFILENAME}" >&2 + exit "${ksft_fail}" + fi fi # Delete the file once it is validated, otherwise keep it # for debugging purposes rm "${TMPFILENAME}" - exit "${ksft_pass}" } function check_for_dependencies() { diff --git a/tools/testing/selftests/drivers/net/netcons_basic.sh b/tools/testing/selftests/drivers/net/netcons_basic.sh index fe765da498e8..40a6ac6191b8 100755 --- a/tools/testing/selftests/drivers/net/netcons_basic.sh +++ b/tools/testing/selftests/drivers/net/netcons_basic.sh @@ -32,21 +32,35 @@ check_for_dependencies echo "6 5" > /proc/sys/kernel/printk # Remove the namespace, interfaces and netconsole target on exit trap cleanup EXIT -# Create one namespace and two interfaces -set_network -# Create a dynamic target for netconsole -create_dynamic_target -# Set userdata "key" with the "value" value -set_user_data -# Listed for netconsole port inside the namespace and destination interface -listen_port_and_save_to "${OUTPUT_FILE}" & -# Wait for socat to start and listen to the port. -wait_local_port_listen "${NAMESPACE}" "${PORT}" udp -# Send the message -echo "${MSG}: ${TARGET}" > /dev/kmsg -# Wait until socat saves the file to disk -busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}" - -# Make sure the message was received in the dst part -# and exit -validate_result "${OUTPUT_FILE}" + +# Run the test twice, with different format modes +for FORMAT in "basic" "extended" +do + echo "Running with target mode: ${FORMAT}" + # Create one namespace and two interfaces + set_network + # Create a dynamic target for netconsole + create_dynamic_target "${FORMAT}" + # Only set userdata for extended format + if [ "$FORMAT" == "extended" ] + then + # Set userdata "key" with the "value" value + set_user_data + fi + # Listed for netconsole port inside the namespace and destination interface + listen_port_and_save_to "${OUTPUT_FILE}" & + # Wait for socat to start and listen to the port. + wait_local_port_listen "${NAMESPACE}" "${PORT}" udp + # Send the message + echo "${MSG}: ${TARGET}" > /dev/kmsg + # Wait until socat saves the file to disk + busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}" + + # Make sure the message was received in the dst part + # and exit + validate_result "${OUTPUT_FILE}" "${FORMAT}" + cleanup +done + +trap - EXIT +exit "${ksft_pass}" |