summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/s390/pci/pci_bus.c82
-rw-r--r--drivers/pci/endpoint/functions/pci-epf-test.c1
-rw-r--r--drivers/pci/pci.c6
-rw-r--r--drivers/pci/pci.h2
-rw-r--r--drivers/pci/pcie/aspm.c20
-rw-r--r--drivers/pci/probe.c87
-rw-r--r--include/linux/hypervisor.h8
7 files changed, 69 insertions, 137 deletions
diff --git a/arch/s390/pci/pci_bus.c b/arch/s390/pci/pci_bus.c
index 5d77acbd1c872..6a8da1b742ae5 100644
--- a/arch/s390/pci/pci_bus.c
+++ b/arch/s390/pci/pci_bus.c
@@ -145,9 +145,6 @@ int zpci_bus_scan_bus(struct zpci_bus *zbus)
struct zpci_dev *zdev;
int devfn, rc, ret = 0;
- if (!zbus->function[0])
- return 0;
-
for (devfn = 0; devfn < ZPCI_FUNCTIONS_PER_BUS; devfn++) {
zdev = zbus->function[devfn];
if (zdev && zdev->state == ZPCI_FN_STATE_CONFIGURED) {
@@ -184,26 +181,26 @@ void zpci_bus_scan_busses(void)
/* zpci_bus_create_pci_bus - Create the PCI bus associated with this zbus
* @zbus: the zbus holding the zdevices
- * @f0: function 0 of the bus
+ * @fr: PCI root function that will determine the bus's domain, and bus speeed
* @ops: the pci operations
*
- * Function zero is taken as a parameter as this is used to determine the
- * domain, multifunction property and maximum bus speed of the entire bus.
+ * The PCI function @fr determines the domain (its UID), multifunction property
+ * and maximum bus speed of the entire bus.
*
* Return: 0 on success, an error code otherwise
*/
-static int zpci_bus_create_pci_bus(struct zpci_bus *zbus, struct zpci_dev *f0, struct pci_ops *ops)
+static int zpci_bus_create_pci_bus(struct zpci_bus *zbus, struct zpci_dev *fr, struct pci_ops *ops)
{
struct pci_bus *bus;
int domain;
- domain = zpci_alloc_domain((u16)f0->uid);
+ domain = zpci_alloc_domain((u16)fr->uid);
if (domain < 0)
return domain;
zbus->domain_nr = domain;
- zbus->multifunction = f0->rid_available;
- zbus->max_bus_speed = f0->max_bus_speed;
+ zbus->multifunction = fr->rid_available;
+ zbus->max_bus_speed = fr->max_bus_speed;
/*
* Note that the zbus->resources are taken over and zbus->resources
@@ -303,47 +300,6 @@ void pcibios_bus_add_device(struct pci_dev *pdev)
}
}
-/* zpci_bus_create_hotplug_slots - Add hotplug slot(s) for device added to bus
- * @zdev: the zPCI device that was newly added
- *
- * Add the hotplug slot(s) for the newly added PCI function. Normally this is
- * simply the slot for the function itself. If however we are adding the
- * function 0 on a zbus, it might be that we already registered functions on
- * that zbus but could not create their hotplug slots yet so add those now too.
- *
- * Return: 0 on success, an error code otherwise
- */
-static int zpci_bus_create_hotplug_slots(struct zpci_dev *zdev)
-{
- struct zpci_bus *zbus = zdev->zbus;
- int devfn, rc = 0;
-
- rc = zpci_init_slot(zdev);
- if (rc)
- return rc;
- zdev->has_hp_slot = 1;
-
- if (zdev->devfn == 0 && zbus->multifunction) {
- /* Now that function 0 is there we can finally create the
- * hotplug slots for those functions with devfn != 0 that have
- * been parked in zbus->function[] waiting for us to be able to
- * create the PCI bus.
- */
- for (devfn = 1; devfn < ZPCI_FUNCTIONS_PER_BUS; devfn++) {
- zdev = zbus->function[devfn];
- if (zdev && !zdev->has_hp_slot) {
- rc = zpci_init_slot(zdev);
- if (rc)
- return rc;
- zdev->has_hp_slot = 1;
- }
- }
-
- }
-
- return rc;
-}
-
static int zpci_bus_add_device(struct zpci_bus *zbus, struct zpci_dev *zdev)
{
int rc = -EINVAL;
@@ -352,21 +308,19 @@ static int zpci_bus_add_device(struct zpci_bus *zbus, struct zpci_dev *zdev)
pr_err("devfn %04x is already assigned\n", zdev->devfn);
return rc;
}
+
zdev->zbus = zbus;
zbus->function[zdev->devfn] = zdev;
zpci_nb_devices++;
- if (zbus->bus) {
- if (zbus->multifunction && !zdev->rid_available) {
- WARN_ONCE(1, "rid_available not set for multifunction\n");
- goto error;
- }
-
- zpci_bus_create_hotplug_slots(zdev);
- } else {
- /* Hotplug slot will be created once function 0 appears */
- zbus->multifunction = 1;
+ if (zbus->multifunction && !zdev->rid_available) {
+ WARN_ONCE(1, "rid_available not set for multifunction\n");
+ goto error;
}
+ rc = zpci_init_slot(zdev);
+ if (rc)
+ goto error;
+ zdev->has_hp_slot = 1;
return 0;
@@ -400,7 +354,11 @@ int zpci_bus_device_register(struct zpci_dev *zdev, struct pci_ops *ops)
return -ENOMEM;
}
- if (zdev->devfn == 0) {
+ if (!zbus->bus) {
+ /* The UID of the first PCI function registered with a zpci_bus
+ * is used as the domain number for that bus. Currently there
+ * is exactly one zpci_bus per domain.
+ */
rc = zpci_bus_create_pci_bus(zbus, zdev, ops);
if (rc)
goto error;
diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
index 5b833f00e9800..a5ed779b0a512 100644
--- a/drivers/pci/endpoint/functions/pci-epf-test.c
+++ b/drivers/pci/endpoint/functions/pci-epf-test.c
@@ -627,7 +627,6 @@ static void pci_epf_test_unbind(struct pci_epf *epf)
cancel_delayed_work(&epf_test->cmd_handler);
pci_epf_test_clean_dma_chan(epf_test);
- pci_epc_stop(epc);
for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) {
epf_bar = &epf->bar[bar];
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index cfaf40a540a82..093303c27ea8e 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1293,9 +1293,6 @@ static int pci_set_full_power_state(struct pci_dev *dev)
pci_restore_bars(dev);
}
- if (dev->bus->self)
- pcie_aspm_pm_state_change(dev->bus->self);
-
return 0;
}
@@ -1390,9 +1387,6 @@ static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state)
pci_power_name(dev->current_state),
pci_power_name(state));
- if (dev->bus->self)
- pcie_aspm_pm_state_change(dev->bus->self);
-
return 0;
}
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index e10cdec6c56e8..785f31086313a 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -560,12 +560,10 @@ bool pcie_wait_for_link(struct pci_dev *pdev, bool active);
#ifdef CONFIG_PCIEASPM
void pcie_aspm_init_link_state(struct pci_dev *pdev);
void pcie_aspm_exit_link_state(struct pci_dev *pdev);
-void pcie_aspm_pm_state_change(struct pci_dev *pdev);
void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
#else
static inline void pcie_aspm_init_link_state(struct pci_dev *pdev) { }
static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev) { }
-static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev) { }
static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev) { }
#endif
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index a96b7424c9bc8..a8aec190986c0 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -1012,25 +1012,6 @@ out:
up_read(&pci_bus_sem);
}
-/* @pdev: the root port or switch downstream port */
-void pcie_aspm_pm_state_change(struct pci_dev *pdev)
-{
- struct pcie_link_state *link = pdev->link_state;
-
- if (aspm_disabled || !link)
- return;
- /*
- * Devices changed PM state, we should recheck if latency
- * meets all functions' requirement
- */
- down_read(&pci_bus_sem);
- mutex_lock(&aspm_lock);
- pcie_update_aspm_capable(link->root);
- pcie_config_aspm_path(link);
- mutex_unlock(&aspm_lock);
- up_read(&pci_bus_sem);
-}
-
void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
{
struct pcie_link_state *link = pdev->link_state;
@@ -1366,4 +1347,3 @@ bool pcie_aspm_support_enabled(void)
{
return aspm_support_enabled;
}
-EXPORT_SYMBOL(pcie_aspm_support_enabled);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 414f659dc8735..9884d8b29d3bf 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2582,33 +2582,39 @@ struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn)
}
EXPORT_SYMBOL(pci_scan_single_device);
-static unsigned int next_fn(struct pci_bus *bus, struct pci_dev *dev,
- unsigned int fn)
+static int next_ari_fn(struct pci_bus *bus, struct pci_dev *dev, int fn)
{
int pos;
u16 cap = 0;
unsigned int next_fn;
- if (pci_ari_enabled(bus)) {
- if (!dev)
- return 0;
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
- if (!pos)
- return 0;
+ if (!dev)
+ return -ENODEV;
- pci_read_config_word(dev, pos + PCI_ARI_CAP, &cap);
- next_fn = PCI_ARI_CAP_NFN(cap);
- if (next_fn <= fn)
- return 0; /* protect against malformed list */
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
+ if (!pos)
+ return -ENODEV;
- return next_fn;
- }
+ pci_read_config_word(dev, pos + PCI_ARI_CAP, &cap);
+ next_fn = PCI_ARI_CAP_NFN(cap);
+ if (next_fn <= fn)
+ return -ENODEV; /* protect against malformed list */
- /* dev may be NULL for non-contiguous multifunction devices */
- if (!dev || dev->multifunction)
- return (fn + 1) % 8;
+ return next_fn;
+}
- return 0;
+static int next_fn(struct pci_bus *bus, struct pci_dev *dev, int fn)
+{
+ if (pci_ari_enabled(bus))
+ return next_ari_fn(bus, dev, fn);
+
+ if (fn >= 7)
+ return -ENODEV;
+ /* only multifunction devices may have more functions */
+ if (dev && !dev->multifunction)
+ return -ENODEV;
+
+ return fn + 1;
}
static int only_one_child(struct pci_bus *bus)
@@ -2646,26 +2652,30 @@ static int only_one_child(struct pci_bus *bus)
*/
int pci_scan_slot(struct pci_bus *bus, int devfn)
{
- unsigned int fn, nr = 0;
struct pci_dev *dev;
+ int fn = 0, nr = 0;
if (only_one_child(bus) && (devfn > 0))
return 0; /* Already scanned the entire slot */
- dev = pci_scan_single_device(bus, devfn);
- if (!dev)
- return 0;
- if (!pci_dev_is_added(dev))
- nr++;
-
- for (fn = next_fn(bus, dev, 0); fn > 0; fn = next_fn(bus, dev, fn)) {
+ do {
dev = pci_scan_single_device(bus, devfn + fn);
if (dev) {
if (!pci_dev_is_added(dev))
nr++;
- dev->multifunction = 1;
+ if (fn > 0)
+ dev->multifunction = 1;
+ } else if (fn == 0) {
+ /*
+ * Function 0 is required unless we are running on
+ * a hypervisor that passes through individual PCI
+ * functions.
+ */
+ if (!hypervisor_isolated_pci_functions())
+ break;
}
- }
+ fn = next_fn(bus, dev, fn);
+ } while (fn >= 0);
/* Only one slot has PCIe device */
if (bus->self && nr)
@@ -2861,29 +2871,14 @@ static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
{
unsigned int used_buses, normal_bridges = 0, hotplug_bridges = 0;
unsigned int start = bus->busn_res.start;
- unsigned int devfn, fn, cmax, max = start;
+ unsigned int devfn, cmax, max = start;
struct pci_dev *dev;
- int nr_devs;
dev_dbg(&bus->dev, "scanning bus\n");
/* Go find them, Rover! */
- for (devfn = 0; devfn < 256; devfn += 8) {
- nr_devs = pci_scan_slot(bus, devfn);
-
- /*
- * The Jailhouse hypervisor may pass individual functions of a
- * multi-function device to a guest without passing function 0.
- * Look for them as well.
- */
- if (jailhouse_paravirt() && nr_devs == 0) {
- for (fn = 1; fn < 8; fn++) {
- dev = pci_scan_single_device(bus, devfn + fn);
- if (dev)
- dev->multifunction = 1;
- }
- }
- }
+ for (devfn = 0; devfn < 256; devfn += 8)
+ pci_scan_slot(bus, devfn);
/* Reserve buses for SR-IOV capability */
used_buses = pci_iov_bus_range(bus);
diff --git a/include/linux/hypervisor.h b/include/linux/hypervisor.h
index fc08b433c856d..9efbc54e35e59 100644
--- a/include/linux/hypervisor.h
+++ b/include/linux/hypervisor.h
@@ -32,4 +32,12 @@ static inline bool jailhouse_paravirt(void)
#endif /* !CONFIG_X86 */
+static inline bool hypervisor_isolated_pci_functions(void)
+{
+ if (IS_ENABLED(CONFIG_S390))
+ return true;
+
+ return jailhouse_paravirt();
+}
+
#endif /* __LINUX_HYPEVISOR_H */
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 20:47:41 +0000