summaryrefslogtreecommitdiff
path: root/linux/src
diff options
context:
space:
mode:
Diffstat (limited to 'linux/src')
-rw-r--r--linux/src/arch/i386/kernel/bios32.c20
-rw-r--r--linux/src/drivers/block/ide.c28
-rw-r--r--linux/src/drivers/block/ide.h2
-rw-r--r--linux/src/drivers/block/triton.c19
-rw-r--r--linux/src/drivers/net/apricot.c16
-rw-r--r--linux/src/drivers/net/rtl8139.c9
-rw-r--r--linux/src/drivers/net/sis900.c1803
-rw-r--r--linux/src/drivers/net/sis900.h284
-rw-r--r--linux/src/drivers/net/sundance.c2
-rw-r--r--linux/src/drivers/pci/pci.c4
-rw-r--r--linux/src/drivers/scsi/aha1542.c8
-rw-r--r--linux/src/drivers/scsi/eata.c2
-rw-r--r--linux/src/include/asm-i386/segment.h109
-rw-r--r--linux/src/include/linux/tqueue.h8
14 files changed, 2233 insertions, 81 deletions
diff --git a/linux/src/arch/i386/kernel/bios32.c b/linux/src/arch/i386/kernel/bios32.c
index 5a0fc385..0b357be0 100644
--- a/linux/src/arch/i386/kernel/bios32.c
+++ b/linux/src/arch/i386/kernel/bios32.c
@@ -166,7 +166,7 @@ static unsigned long bios32_service(unsigned long service)
unsigned long flags;
save_flags(flags); cli();
- __asm__("lcall (%%edi)"
+ __asm__("lcall *(%%edi)"
: "=a" (return_code),
"=b" (address),
"=c" (length),
@@ -209,7 +209,7 @@ static int check_pcibios(void)
pci_indirect.address = pcibios_entry;
save_flags(flags); cli();
- __asm__("lcall (%%edi)\n\t"
+ __asm__("lcall *(%%edi)\n\t"
"jc 1f\n\t"
"xor %%ah, %%ah\n"
"1:\tshl $8, %%eax\n\t"
@@ -254,7 +254,7 @@ static int pci_bios_find_class (unsigned int class_code, unsigned short index,
unsigned long flags;
save_flags(flags); cli();
- __asm__ ("lcall (%%edi)\n\t"
+ __asm__ ("lcall *(%%edi)\n\t"
"jc 1f\n\t"
"xor %%ah, %%ah\n"
"1:"
@@ -279,7 +279,7 @@ static int pci_bios_find_device (unsigned short vendor, unsigned short device_id
unsigned long flags;
save_flags(flags); cli();
- __asm__("lcall (%%edi)\n\t"
+ __asm__("lcall *(%%edi)\n\t"
"jc 1f\n\t"
"xor %%ah, %%ah\n"
"1:"
@@ -304,7 +304,7 @@ static int pci_bios_read_config_byte(unsigned char bus,
unsigned long flags;
save_flags(flags); cli();
- __asm__("lcall (%%esi)\n\t"
+ __asm__("lcall *(%%esi)\n\t"
"jc 1f\n\t"
"xor %%ah, %%ah\n"
"1:"
@@ -326,7 +326,7 @@ static int pci_bios_read_config_word (unsigned char bus,
unsigned long flags;
save_flags(flags); cli();
- __asm__("lcall (%%esi)\n\t"
+ __asm__("lcall *(%%esi)\n\t"
"jc 1f\n\t"
"xor %%ah, %%ah\n"
"1:"
@@ -348,7 +348,7 @@ static int pci_bios_read_config_dword (unsigned char bus,
unsigned long flags;
save_flags(flags); cli();
- __asm__("lcall (%%esi)\n\t"
+ __asm__("lcall *(%%esi)\n\t"
"jc 1f\n\t"
"xor %%ah, %%ah\n"
"1:"
@@ -370,7 +370,7 @@ static int pci_bios_write_config_byte (unsigned char bus,
unsigned long flags;
save_flags(flags); cli();
- __asm__("lcall (%%esi)\n\t"
+ __asm__("lcall *(%%esi)\n\t"
"jc 1f\n\t"
"xor %%ah, %%ah\n"
"1:"
@@ -392,7 +392,7 @@ static int pci_bios_write_config_word (unsigned char bus,
unsigned long flags;
save_flags(flags); cli();
- __asm__("lcall (%%esi)\n\t"
+ __asm__("lcall *(%%esi)\n\t"
"jc 1f\n\t"
"xor %%ah, %%ah\n"
"1:"
@@ -414,7 +414,7 @@ static int pci_bios_write_config_dword (unsigned char bus,
unsigned long flags;
save_flags(flags); cli();
- __asm__("lcall (%%esi)\n\t"
+ __asm__("lcall *(%%esi)\n\t"
"jc 1f\n\t"
"xor %%ah, %%ah\n"
"1:"
diff --git a/linux/src/drivers/block/ide.c b/linux/src/drivers/block/ide.c
index 5dcd0aa9..18f2e763 100644
--- a/linux/src/drivers/block/ide.c
+++ b/linux/src/drivers/block/ide.c
@@ -1495,6 +1495,10 @@ static inline void do_rw_disk (ide_drive_t *drive, struct request *rq, unsigned
if (drive->using_dma && !(HWIF(drive)->dmaproc(ide_dma_write, drive)))
return;
#endif /* CONFIG_BLK_DEV_TRITON */
+ if (drive->mult_count)
+ ide_set_handler (drive, &multwrite_intr, WAIT_CMD);
+ else
+ ide_set_handler (drive, &write_intr, WAIT_CMD);
OUT_BYTE(drive->mult_count ? WIN_MULTWRITE : WIN_WRITE, io_base+IDE_COMMAND_OFFSET);
if (ide_wait_stat(drive, DATA_READY, drive->bad_wstat, WAIT_DRQ)) {
printk("%s: no DRQ after issuing %s\n", drive->name,
@@ -1505,10 +1509,8 @@ static inline void do_rw_disk (ide_drive_t *drive, struct request *rq, unsigned
cli();
if (drive->mult_count) {
HWGROUP(drive)->wrq = *rq; /* scratchpad */
- ide_set_handler (drive, &multwrite_intr, WAIT_CMD);
ide_multwrite(drive, drive->mult_count);
} else {
- ide_set_handler (drive, &write_intr, WAIT_CMD);
ide_output_data(drive, rq->buffer, SECTOR_WORDS);
}
return;
@@ -2914,11 +2916,23 @@ static void probe_cmos_for_drives (ide_hwif_t *hwif)
for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];
if ((cmos_disks & (0xf0 >> (unit*4))) && !drive->present && !drive->nobios) {
- drive->cyl = drive->bios_cyl = *(unsigned short *)BIOS;
- drive->head = drive->bios_head = *(BIOS+2);
- drive->sect = drive->bios_sect = *(BIOS+14);
- drive->ctl = *(BIOS+8);
- drive->present = 1;
+ unsigned short cyl = *(unsigned short *)BIOS;
+ unsigned char head = *(BIOS+2);
+ unsigned char sect = *(BIOS+14);
+ unsigned char ctl = *(BIOS+8);
+ if (cyl > 0 && head > 0 && sect > 0 && sect < 64) {
+ drive->cyl = drive->bios_cyl = cyl;
+ drive->head = drive->bios_head = head;
+ drive->sect = drive->bios_sect = sect;
+ drive->ctl = ctl;
+ drive->present = 1;
+ printk("hd%d: got CHS=%d/%d/%d CTL=%x from BIOS\n",
+ unit, cyl, head, sect, ctl);
+
+ } else {
+ printk("hd%d: CHS=%d/%d/%d CTL=%x from BIOS ignored\n",
+ unit, cyl, head, sect, ctl);
+ }
}
BIOS += 16;
}
diff --git a/linux/src/drivers/block/ide.h b/linux/src/drivers/block/ide.h
index 5310ac8f..44331607 100644
--- a/linux/src/drivers/block/ide.h
+++ b/linux/src/drivers/block/ide.h
@@ -23,7 +23,7 @@
* REALLY_SLOW_IO can be defined in ide.c and ide-cd.c, if necessary
*/
#undef REALLY_FAST_IO /* define if ide ports are perfect */
-#define INITIAL_MULT_COUNT 0 /* off=0; on=2,4,8,16,32, etc.. */
+#define INITIAL_MULT_COUNT 16 /* off=0; on=2,4,8,16,32, etc.. */
#ifndef SUPPORT_SLOW_DATA_PORTS /* 1 to support slow data ports */
#define SUPPORT_SLOW_DATA_PORTS 1 /* 0 to reduce kernel size */
diff --git a/linux/src/drivers/block/triton.c b/linux/src/drivers/block/triton.c
index 739b1b94..2e3d1878 100644
--- a/linux/src/drivers/block/triton.c
+++ b/linux/src/drivers/block/triton.c
@@ -129,6 +129,13 @@
const char *good_dma_drives[] = {"Micropolis 2112A",
"CONNER CTMA 4000",
"CONNER CTT8000-A",
+ // Should work, but kvm/qemu seem to produce
+ // issues:
+ // hd1 irq timeout: status=0xd8 { Busy }
+ // hd0: disabled DMA
+ // hd1: disabled DMA
+ // ide0: reset: success
+ //"QEMU HARDDISK",
NULL};
/*
@@ -409,7 +416,17 @@ void ide_init_triton (byte bus, byte fn)
goto quit;
}
if ((pcicmd & 4) == 0) {
- printk("ide: BM-DMA feature is not enabled (BIOS)\n");
+ printk("ide: BM-DMA feature is not enabled (BIOS), enabling\n");
+ pcicmd |= 4;
+ pcibios_write_config_word(bus, fn, 0x04, pcicmd);
+ if ((rc = pcibios_read_config_word(bus, fn, 0x04, &pcicmd))) {
+ printk("ide: Couldn't read back PCI command\n");
+ goto quit;
+ }
+ }
+
+ if ((pcicmd & 4) == 0) {
+ printk("ide: BM-DMA feature couldn't be enabled\n");
} else {
/*
* Get the bmiba base address
diff --git a/linux/src/drivers/net/apricot.c b/linux/src/drivers/net/apricot.c
index 0799f620..d106e50d 100644
--- a/linux/src/drivers/net/apricot.c
+++ b/linux/src/drivers/net/apricot.c
@@ -98,7 +98,7 @@ struct i596_tbd {
unsigned short size;
unsigned short pad;
struct i596_tbd *next;
- char *data;
+ unsigned char *data;
};
struct tx_cmd {
@@ -115,7 +115,7 @@ struct i596_rfd {
long rbd;
unsigned short count;
unsigned short size;
- char data[1532];
+ unsigned char data[1532];
};
#define RX_RING_SIZE 8
@@ -187,7 +187,7 @@ static void i596_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static int i596_close(struct device *dev);
static struct enet_statistics *i596_get_stats(struct device *dev);
static void i596_add_cmd(struct device *dev, struct i596_cmd *cmd);
-static void print_eth(char *);
+static void print_eth(unsigned char *);
static void set_multicast_list(struct device *dev);
@@ -659,20 +659,20 @@ i596_start_xmit(struct sk_buff *skb, struct device *dev)
}
-static void print_eth(char *add)
+static void print_eth(unsigned char *add)
{
int i;
printk ("Dest ");
for (i = 0; i < 6; i++)
- printk(" %2.2X", (unsigned char)add[i]);
+ printk(" %2.2X", add[i]);
printk ("\n");
printk ("Source");
for (i = 0; i < 6; i++)
- printk(" %2.2X", (unsigned char)add[i+6]);
+ printk(" %2.2X", add[i+6]);
printk ("\n");
- printk ("type %2.2X%2.2X\n", (unsigned char)add[12], (unsigned char)add[13]);
+ printk ("type %2.2X%2.2X\n", add[12], add[13]);
}
int apricot_probe(struct device *dev)
@@ -980,7 +980,7 @@ static void set_multicast_list(struct device *dev)
memcpy(cp, dmi,6);
cp+=6;
}
- print_eth (((char *)(cmd + 1)) + 2);
+ print_eth (((unsigned char *)(cmd + 1)) + 2);
i596_add_cmd(dev, cmd);
}
else
diff --git a/linux/src/drivers/net/rtl8139.c b/linux/src/drivers/net/rtl8139.c
index 1d00f686..e97c905d 100644
--- a/linux/src/drivers/net/rtl8139.c
+++ b/linux/src/drivers/net/rtl8139.c
@@ -705,10 +705,6 @@ static int rtl8129_open(struct net_device *dev)
int rx_buf_len_idx;
MOD_INC_USE_COUNT;
- if (request_irq(dev->irq, &rtl8129_interrupt, SA_SHIRQ, dev->name, dev)) {
- MOD_DEC_USE_COUNT;
- return -EAGAIN;
- }
/* The Rx ring allocation size is 2^N + delta, which is worst-case for
the kernel binary-buddy allocation. We allocate the Tx bounce buffers
@@ -737,6 +733,11 @@ static int rtl8129_open(struct net_device *dev)
tp->rx_config =
(RX_FIFO_THRESH << 13) | (rx_buf_len_idx << 11) | (RX_DMA_BURST<<8);
+ if (request_irq(dev->irq, &rtl8129_interrupt, SA_SHIRQ, dev->name, dev)) {
+ MOD_DEC_USE_COUNT;
+ return -EAGAIN;
+ }
+
rtl_hw_start(dev);
netif_start_tx_queue(dev);
diff --git a/linux/src/drivers/net/sis900.c b/linux/src/drivers/net/sis900.c
new file mode 100644
index 00000000..d9e5f63a
--- /dev/null
+++ b/linux/src/drivers/net/sis900.c
@@ -0,0 +1,1803 @@
+/* sis900.c: A SiS 900/7016 PCI Fast Ethernet driver for Linux.
+ Copyright 1999 Silicon Integrated System Corporation
+ Revision: 1.06.11 Apr. 30 2002
+
+ Modified from the driver which is originally written by Donald Becker.
+
+ This software may be used and distributed according to the terms
+ of the GNU Public License (GPL), incorporated herein by reference.
+ Drivers based on this skeleton fall under the GPL and must retain
+ the authorship (implicit copyright) notice.
+
+ References:
+ SiS 7016 Fast Ethernet PCI Bus 10/100 Mbps LAN Controller with OnNow Support,
+ preliminary Rev. 1.0 Jan. 14, 1998
+ SiS 900 Fast Ethernet PCI Bus 10/100 Mbps LAN Single Chip with OnNow Support,
+ preliminary Rev. 1.0 Nov. 10, 1998
+ SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution,
+ preliminary Rev. 1.0 Jan. 18, 1998
+ http://www.sis.com.tw/support/databook.htm
+
+ Rev 1.06.11 Apr. 25 2002 Mufasa Yang (mufasa@sis.com.tw) added SiS962 support
+ Rev 1.06.10 Dec. 18 2001 Hui-Fen Hsu workaround for EDB & RTL8201 PHY
+ Rev 1.06.09 Sep. 28 2001 Hui-Fen Hsu update for 630ET & workaround for ICS1893 PHY
+ Rev 1.06.08 Mar. 2 2001 Hui-Fen Hsu (hfhsu@sis.com.tw) some bug fix & 635M/B support
+ Rev 1.06.07 Jan. 8 2001 Lei-Chun Chang added RTL8201 PHY support
+ Rev 1.06.06 Sep. 6 2000 Lei-Chun Chang added ICS1893 PHY support
+ Rev 1.06.05 Aug. 22 2000 Lei-Chun Chang (lcchang@sis.com.tw) modified 630E equalier workaroung rule
+ Rev 1.06.03 Dec. 23 1999 Ollie Lho Third release
+ Rev 1.06.02 Nov. 23 1999 Ollie Lho bug in mac probing fixed
+ Rev 1.06.01 Nov. 16 1999 Ollie Lho CRC calculation provide by Joseph Zbiciak (im14u2c@primenet.com)
+ Rev 1.06 Nov. 4 1999 Ollie Lho (ollie@sis.com.tw) Second release
+ Rev 1.05.05 Oct. 29 1999 Ollie Lho (ollie@sis.com.tw) Single buffer Tx/Rx
+ Chin-Shan Li (lcs@sis.com.tw) Added AMD Am79c901 HomePNA PHY support
+ Rev 1.05 Aug. 7 1999 Jim Huang (cmhuang@sis.com.tw) Initial release
+*/
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/malloc.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/bios32.h>
+#include <linux/compatmac.h>
+
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <asm/processor.h> /* Processor type for cache alignment. */
+#include <asm/bitops.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <asm/types.h>
+#include "sis900.h"
+
+
+#if LINUX_VERSION_CODE < 0x20159
+#define dev_free_skb(skb) dev_kfree_skb (skb, FREE_WRITE);
+#else /* Grrr, incompatible changes should change the name. */
+#define dev_free_skb(skb) dev_kfree_skb(skb);
+#endif
+
+static const char *version =
+"sis900.c: modified v1.06.11 4/30/2002";
+
+static int max_interrupt_work = 20;
+static int multicast_filter_limit = 128;
+
+#define sis900_debug debug
+static int sis900_debug = 0;
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (4*HZ)
+
+enum pci_flags_bit {
+ PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4,
+ PCI_ADDR0=0x10<<0, PCI_ADDR1=0x10<<1, PCI_ADDR2=0x10<<2, PCI_ADDR3=0x10<<3,
+};
+
+struct mac_chip_info {
+ const char *name;
+ u16 vendor_id, device_id, flags;
+ int io_size;
+ struct device *(*probe) (struct mac_chip_info *mac, long ioaddr, int irq,
+ int pci_index, unsigned char pci_device_fn, unsigned char pci_bus, struct device * net_dev);
+};
+static struct device * sis900_mac_probe (struct mac_chip_info * mac, long ioaddr, int irq,
+ int pci_index, unsigned char pci_device_fn,
+ unsigned char pci_bus, struct device * net_dev);
+static struct mac_chip_info mac_chip_table[] = {
+ { "SiS 900 PCI Fast Ethernet", PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_900,
+ PCI_COMMAND_IO|PCI_COMMAND_MASTER, SIS900_TOTAL_SIZE, sis900_mac_probe},
+ { "SiS 7016 PCI Fast Ethernet",PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_7016,
+ PCI_COMMAND_IO|PCI_COMMAND_MASTER, SIS900_TOTAL_SIZE, sis900_mac_probe},
+ {0,}, /* 0 terminatted list. */
+};
+
+static void sis900_read_mode(struct device *net_dev, int *speed, int *duplex);
+
+static struct mii_chip_info {
+ const char * name;
+ u16 phy_id0;
+ u16 phy_id1;
+ u8 phy_types;
+#define HOME 0x0001
+#define LAN 0x0002
+#define MIX 0x0003
+} mii_chip_table[] = {
+ { "SiS 900 Internal MII PHY", 0x001d, 0x8000, LAN },
+ { "SiS 7014 Physical Layer Solution", 0x0016, 0xf830, LAN },
+ { "AMD 79C901 10BASE-T PHY", 0x0000, 0x6B70, LAN },
+ { "AMD 79C901 HomePNA PHY", 0x0000, 0x6B90, HOME},
+ { "ICS LAN PHY", 0x0015, 0xF440, LAN },
+ { "NS 83851 PHY", 0x2000, 0x5C20, MIX },
+ { "Realtek RTL8201 PHY", 0x0000, 0x8200, LAN },
+ {0,},
+};
+
+struct mii_phy {
+ struct mii_phy * next;
+ int phy_addr;
+ u16 phy_id0;
+ u16 phy_id1;
+ u16 status;
+ u8 phy_types;
+};
+
+typedef struct _BufferDesc {
+ u32 link;
+ u32 cmdsts;
+ u32 bufptr;
+} BufferDesc;
+
+struct sis900_private {
+ struct device *next_module;
+ struct enet_statistics stats;
+
+ /* struct pci_dev * pci_dev;*/
+ unsigned char pci_bus;
+ unsigned char pci_device_fn;
+ int pci_index;
+
+ struct mac_chip_info * mac;
+ struct mii_phy * mii;
+ struct mii_phy * first_mii; /* record the first mii structure */
+ unsigned int cur_phy;
+
+ struct timer_list timer; /* Link status detection timer. */
+ u8 autong_complete; /* 1: auto-negotiate complete */
+
+ unsigned int cur_rx, dirty_rx; /* producer/comsumer pointers for Tx/Rx ring */
+ unsigned int cur_tx, dirty_tx;
+
+ /* The saved address of a sent/receive-in-place packet buffer */
+ struct sk_buff *tx_skbuff[NUM_TX_DESC];
+ struct sk_buff *rx_skbuff[NUM_RX_DESC];
+ BufferDesc tx_ring[NUM_TX_DESC];
+ BufferDesc rx_ring[NUM_RX_DESC];
+
+ unsigned int tx_full; /* The Tx queue is full. */
+ int LinkOn;
+};
+
+#ifdef MODULE
+#if LINUX_VERSION_CODE > 0x20115
+MODULE_AUTHOR("Jim Huang <cmhuang@sis.com.tw>, Ollie Lho <ollie@sis.com.tw>");
+MODULE_DESCRIPTION("SiS 900 PCI Fast Ethernet driver");
+MODULE_PARM(multicast_filter_limit, "i");
+MODULE_PARM(max_interrupt_work, "i");
+MODULE_PARM(debug, "i");
+#endif
+#endif
+
+static int sis900_open(struct device *net_dev);
+static int sis900_mii_probe (unsigned char pci_bus, unsigned char pci_device_fn, struct device * net_dev);
+static void sis900_init_rxfilter (struct device * net_dev);
+static u16 read_eeprom(long ioaddr, int location);
+static u16 mdio_read(struct device *net_dev, int phy_id, int location);
+static void mdio_write(struct device *net_dev, int phy_id, int location, int val);
+static void sis900_timer(unsigned long data);
+static void sis900_check_mode (struct device *net_dev, struct mii_phy *mii_phy);
+static void sis900_tx_timeout(struct device *net_dev);
+static void sis900_init_tx_ring(struct device *net_dev);
+static void sis900_init_rx_ring(struct device *net_dev);
+static int sis900_start_xmit(struct sk_buff *skb, struct device *net_dev);
+static int sis900_rx(struct device *net_dev);
+static void sis900_finish_xmit (struct device *net_dev);
+static void sis900_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+static int sis900_close(struct device *net_dev);
+static int mii_ioctl(struct device *net_dev, struct ifreq *rq, int cmd);
+static struct enet_statistics *sis900_get_stats(struct device *net_dev);
+static u16 sis900_compute_hashtable_index(u8 *addr, u8 revision);
+static void set_rx_mode(struct device *net_dev);
+static void sis900_reset(struct device *net_dev);
+static void sis630_set_eq(struct device *net_dev, u8 revision);
+static u16 sis900_default_phy(struct device * net_dev);
+static void sis900_set_capability( struct device *net_dev ,struct mii_phy *phy);
+static u16 sis900_reset_phy(struct device *net_dev, int phy_addr);
+static void sis900_auto_negotiate(struct device *net_dev, int phy_addr);
+static void sis900_set_mode (long ioaddr, int speed, int duplex);
+
+/* A list of all installed SiS900 devices, for removing the driver module. */
+static struct device *root_sis900_dev = NULL;
+
+#ifdef HAVE_DEVLIST
+struct netdev_entry netcard_drv =
+ {"sis900", sis900_probe, SIS900_TOTAL_SIZE, NULL};
+#endif
+
+/* walk through every ethernet PCI devices to see if some of them are matched with our card list*/
+int sis900_probe (struct device * net_dev)
+{
+ int found = 0;
+ int pci_index = 0;
+ unsigned char pci_bus, pci_device_fn;
+ long ioaddr;
+ int irq;
+
+ if (!pcibios_present())
+ return -ENODEV;
+
+ for (; pci_index < 0xff; pci_index++)
+ {
+ u16 vendor, device, pci_command;
+ struct mac_chip_info *mac;
+
+ if (pcibios_find_class (PCI_CLASS_NETWORK_ETHERNET << 8, pci_index,
+ &pci_bus, &pci_device_fn) != PCIBIOS_SUCCESSFUL)
+ break;
+
+ pcibios_read_config_word(pci_bus, pci_device_fn, PCI_VENDOR_ID, &vendor);
+ pcibios_read_config_word(pci_bus, pci_device_fn, PCI_DEVICE_ID, &device);
+
+ for (mac = mac_chip_table; mac->vendor_id; mac++)
+ {
+ if (vendor == mac->vendor_id && device == mac->device_id) break;
+ }
+
+ /* pci_dev does not match any of our cards */
+ if (mac->vendor_id == 0)
+ continue;
+
+ {
+ u32 pci_ioaddr;
+ u8 pci_irq_line;
+
+ pcibios_read_config_byte(pci_bus, pci_device_fn,
+ PCI_INTERRUPT_LINE, &pci_irq_line);
+ pcibios_read_config_dword(pci_bus, pci_device_fn,
+ PCI_BASE_ADDRESS_0, &pci_ioaddr);
+ ioaddr = pci_ioaddr & ~3;
+ irq = pci_irq_line;
+
+ if ((mac->flags & PCI_USES_IO) &&
+ check_region (pci_ioaddr, mac->io_size))
+ continue;
+
+ pcibios_read_config_word(pci_bus, pci_device_fn,
+ PCI_COMMAND, &pci_command);
+
+ {
+ u8 lat;
+
+ pcibios_read_config_byte(pci_bus, pci_device_fn, PCI_LATENCY_TIMER, &lat);
+ if (lat < 16) {
+ printk("PCI: Increasing latency timer of device %02x:%02x to 64\n",
+ pci_bus, pci_device_fn);
+ pcibios_write_config_byte(pci_bus, pci_device_fn, PCI_LATENCY_TIMER, 64);
+ }
+ }
+ net_dev = mac->probe (mac, ioaddr, irq, pci_index, pci_device_fn, pci_bus, net_dev);
+ if (net_dev != NULL)
+ {
+ found++;
+ }
+ net_dev = NULL;
+ }
+ }
+ return found ? 0 : -ENODEV;
+
+}
+
+/* older SiS900 and friends, use EEPROM to store MAC address */
+static int
+sis900_get_mac_addr(long ioaddr, struct device *net_dev)
+{
+ u16 signature;
+ int i;
+
+ /* check to see if we have sane EEPROM */
+ signature = (u16) read_eeprom(ioaddr, EEPROMSignature);
+ if (signature == 0xffff || signature == 0x0000) {
+ printk (KERN_INFO "%s: Error EERPOM read %x\n",
+ net_dev->name, signature);
+ return 0;
+ }
+
+ /* get MAC address from EEPROM */
+ for (i = 0; i < 3; i++)
+ ((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr);
+ return 1;
+}
+
+/* SiS630E model, use APC CMOS RAM to store MAC address */
+static int sis630e_get_mac_addr(long ioaddr, int pci_index, struct device *net_dev)
+{
+ u8 reg;
+ int i;
+ u8 pci_bus, pci_dfn;
+ int not_found;
+
+ not_found = pcibios_find_device(0x1039, 0x0008,
+ pci_index,
+ &pci_bus,
+ &pci_dfn);
+ if (not_found) {
+ printk("%s: Can not find ISA bridge\n", net_dev->name);
+ return 0;
+ }
+ pcibios_read_config_byte(pci_bus, pci_dfn, 0x48, &reg);
+ pcibios_write_config_byte(pci_bus, pci_dfn, 0x48, reg | 0x40);
+
+ for (i = 0; i < 6; i++) {
+ outb(0x09 + i, 0x70);
+ ((u8 *)(net_dev->dev_addr))[i] = inb(0x71);
+ }
+ pcibios_write_config_byte(pci_bus, pci_dfn, 0x48, reg & ~0x40);
+
+ return 1;
+}
+
+/* 635 model : set Mac reload bit and get mac address from rfdr */
+static int sis635_get_mac_addr(struct device *net_dev)
+{
+ long ioaddr = net_dev->base_addr;
+ u32 rfcrSave;
+ u32 i;
+
+ rfcrSave = inl(rfcr + ioaddr);
+
+ outl(rfcrSave | RELOAD, ioaddr + cr);
+ outl(0, ioaddr + cr);
+
+ /* disable packet filtering before setting filter */
+ outl(rfcrSave & ~RFEN, rfcr + ioaddr);
+
+ /* load MAC addr to filter data register */
+ for (i = 0 ; i < 3 ; i++) {
+ outl((i << RFADDR_shift), ioaddr + rfcr);
+ *( ((u16 *)net_dev->dev_addr) + i) = inw(ioaddr + rfdr);
+ }
+
+ /* enable packet filitering */
+ outl(rfcrSave | RFEN, rfcr + ioaddr);
+
+ return 1;
+}
+
+
+/**
+ * sis962_get_mac_addr: - Get MAC address for SiS962 model
+ * @pci_dev: the sis900 pci device
+ * @net_dev: the net device to get address for
+ *
+ * SiS962 model, use EEPROM to store MAC address. And EEPROM is shared by
+ * LAN and 1394. When access EEPROM, send EEREQ signal to hardware first
+ * and wait for EEGNT. If EEGNT is ON, EEPROM is permitted to be access
+ * by LAN, otherwise is not. After MAC address is read from EEPROM, send
+ * EEDONE signal to refuse EEPROM access by LAN.
+ * MAC address is read into @net_dev->dev_addr.
+ */
+
+static int sis962_get_mac_addr(struct device *net_dev)
+{
+ long ioaddr = net_dev->base_addr;
+ long ee_addr = ioaddr + mear;
+ u32 waittime = 0;
+ int i;
+
+ outl(EEREQ, ee_addr);
+ while(waittime < 2000) {
+ if(inl(ee_addr) & EEGNT) {
+ /* get MAC address from EEPROM */
+ for (i = 0; i < 3; i++)
+ ((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr);
+ outl(EEDONE, ee_addr);
+ return 1;
+ } else {
+ udelay(1);
+ waittime ++;
+ }
+ }
+ outl(EEDONE, ee_addr);
+ return 0;
+}
+
+struct device *
+sis900_mac_probe (struct mac_chip_info *mac, long ioaddr, int irq, int pci_index,
+ unsigned char pci_device_fn, unsigned char pci_bus, struct device * net_dev)
+{
+ struct sis900_private *sis_priv;
+ static int did_version = 0;
+
+ u8 revision;
+ int i, ret = 0;
+
+ if (did_version++ == 0)
+ printk(KERN_INFO "%s\n", version);
+
+ if ((net_dev = init_etherdev(net_dev, 0)) == NULL)
+ return NULL;
+
+ if ((net_dev->priv = kmalloc(sizeof(struct sis900_private), GFP_KERNEL)) == NULL) {
+ unregister_netdev(net_dev);
+ return NULL;
+ }
+
+ sis_priv = net_dev->priv;
+ memset(sis_priv, 0, sizeof(struct sis900_private));
+
+ /* We do a request_region() to register /proc/ioports info. */
+ request_region(ioaddr, mac->io_size, net_dev->name);
+ net_dev->base_addr = ioaddr;
+ net_dev->irq = irq;
+
+ sis_priv->mac = mac;
+ sis_priv->pci_bus = pci_bus;
+ sis_priv->pci_device_fn = pci_device_fn;
+ sis_priv->pci_index = pci_index;
+
+ pcibios_read_config_byte(pci_bus, pci_device_fn, PCI_CLASS_REVISION, &revision);
+
+ if ( revision == SIS630E_900_REV )
+ ret = sis630e_get_mac_addr(ioaddr, pci_index, net_dev);
+ else if ((revision > 0x81) && (revision <= 0x90))
+ ret = sis635_get_mac_addr(net_dev);
+ else if (revision == SIS962_900_REV)
+ ret = sis962_get_mac_addr(net_dev);
+ else
+ ret = sis900_get_mac_addr(ioaddr, net_dev);
+
+ if (ret == 0) {
+ unregister_netdev(net_dev);
+ return NULL;
+ }
+
+ /* print some information about our NIC */
+ printk(KERN_INFO "%s: %s at %#lx, IRQ %d, ", net_dev->name, mac->name,
+ ioaddr, irq);
+ for (i = 0; i < 5; i++)
+ printk("%2.2x:", (u8)net_dev->dev_addr[i]);
+ printk("%2.2x.\n", net_dev->dev_addr[i]);
+
+ /* 630ET : set the mii access mode as software-mode */
+ if (revision == SIS630ET_900_REV)
+ outl(ACCESSMODE | inl(ioaddr + cr), ioaddr + cr);
+
+ /* probe for mii transceiver */
+ if (sis900_mii_probe(pci_bus, pci_device_fn, net_dev) == 0) {
+ unregister_netdev(net_dev);
+ kfree(sis_priv);
+ release_region(ioaddr, mac->io_size);
+ return NULL;
+ }
+
+ sis_priv->next_module = root_sis900_dev;
+ root_sis900_dev = net_dev;
+
+ /* The SiS900-specific entries in the device structure. */
+ net_dev->open = &sis900_open;
+ net_dev->hard_start_xmit = &sis900_start_xmit;
+ net_dev->stop = &sis900_close;
+ net_dev->get_stats = &sis900_get_stats;
+ net_dev->set_multicast_list = &set_rx_mode;
+ net_dev->do_ioctl = &mii_ioctl;
+
+ return net_dev;
+}
+
+/* sis900_mii_probe: - Probe MII PHY for sis900 */
+static int sis900_mii_probe (unsigned char pci_bus, unsigned char pci_device_fn, struct device * net_dev)
+{
+ struct sis900_private * sis_priv = (struct sis900_private *)net_dev->priv;
+ u16 poll_bit = MII_STAT_LINK, status = 0;
+ unsigned int timeout = jiffies + 5 * HZ;
+ int phy_addr;
+ u8 revision;
+
+ sis_priv->mii = NULL;
+
+ /* search for total of 32 possible mii phy addresses */
+ for (phy_addr = 0; phy_addr < 32; phy_addr++) {
+ struct mii_phy * mii_phy = NULL;
+ u16 mii_status;
+ int i;
+
+ for(i=0; i<2; i++)
+ mii_status = mdio_read(net_dev, phy_addr, MII_STATUS);
+
+ if (mii_status == 0xffff || mii_status == 0x0000)
+ /* the mii is not accessable, try next one */
+ continue;
+
+ if ((mii_phy = kmalloc(sizeof(struct mii_phy), GFP_KERNEL)) == NULL) {
+ printk(KERN_INFO "Cannot allocate mem for struct mii_phy\n");
+ return 0;
+ }
+
+ mii_phy->phy_id0 = mdio_read(net_dev, phy_addr, MII_PHY_ID0);
+ mii_phy->phy_id1 = mdio_read(net_dev, phy_addr, MII_PHY_ID1);
+ mii_phy->phy_addr = phy_addr;
+ mii_phy->status = mii_status;
+ mii_phy->next = sis_priv->mii;
+ sis_priv->mii = mii_phy;
+ sis_priv->first_mii = mii_phy;
+
+ for (i=0; mii_chip_table[i].phy_id1; i++)
+ if ( ( mii_phy->phy_id0 == mii_chip_table[i].phy_id0 ) &&
+ ( (mii_phy->phy_id1 & 0xFFF0) == mii_chip_table[i].phy_id1 )){
+
+ mii_phy->phy_types = mii_chip_table[i].phy_types;
+ if(mii_chip_table[i].phy_types == MIX)
+ mii_phy->phy_types =
+ (mii_status & (MII_STAT_CAN_TX_FDX | MII_STAT_CAN_TX))?LAN:HOME;
+ printk(KERN_INFO "%s: %s transceiver found at address %d.\n",
+ net_dev->name, mii_chip_table[i].name, phy_addr);
+ break;
+ }
+
+ if( !mii_chip_table[i].phy_id1 )
+ printk(KERN_INFO "%s: Unknown PHY transceiver found at address %d.\n",
+ net_dev->name, phy_addr);
+ }
+
+ if (sis_priv->mii == NULL) {
+ printk(KERN_INFO "%s: No MII transceivers found!\n",
+ net_dev->name);
+ return 0;
+ }
+
+ /* Slect Default PHY to put in sis_priv->mii & sis_priv->cur_phy */
+ sis_priv->mii = NULL;
+ sis900_default_phy( net_dev );
+
+ /* Reset PHY if default PHY is internal sis900 */
+ if( (sis_priv->mii->phy_id0 == 0x001D) &&
+ ( (sis_priv->mii->phy_id1&0xFFF0) == 0x8000) )
+ status = sis900_reset_phy( net_dev, sis_priv->cur_phy );
+
+ /* workaround for ICS1893 PHY */
+ if ((sis_priv->mii->phy_id0 == 0x0015) &&
+ ((sis_priv->mii->phy_id1&0xFFF0) == 0xF440))
+ mdio_write(net_dev, sis_priv->cur_phy, 0x0018, 0xD200);
+
+ if( status & MII_STAT_LINK ){
+ while (poll_bit)
+ {
+ poll_bit ^= (mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS) & poll_bit);
+ if (jiffies >= timeout)
+ {
+ printk(KERN_WARNING "%s: reset phy and link down now\n", net_dev->name);
+ return -ETIME;
+ }
+ }
+ }
+
+ pcibios_read_config_byte(pci_bus, pci_device_fn, PCI_CLASS_REVISION, &revision);
+ if (revision == SIS630E_900_REV) {
+ /* SiS 630E has some bugs on default value of PHY registers */
+ mdio_write(net_dev, sis_priv->cur_phy, MII_ANADV, 0x05e1);
+ mdio_write(net_dev, sis_priv->cur_phy, MII_CONFIG1, 0x22);
+ mdio_write(net_dev, sis_priv->cur_phy, MII_CONFIG2, 0xff00);
+ mdio_write(net_dev, sis_priv->cur_phy, MII_MASK, 0xffc0);
+ //mdio_write(net_dev, sis_priv->cur_phy, MII_CONTROL, 0x1000);
+ }
+
+ if (sis_priv->mii->status & MII_STAT_LINK)
+ sis_priv->LinkOn = TRUE;
+ else
+ sis_priv->LinkOn = FALSE;
+
+ return 1;
+}
+
+
+/* sis900_default_phy : Select one default PHY for sis900 mac */
+static u16 sis900_default_phy(struct device * net_dev)
+{
+ struct sis900_private * sis_priv = (struct sis900_private *)net_dev->priv;
+ struct mii_phy *phy = NULL, *phy_home = NULL, *default_phy = NULL;
+ u16 status;
+
+ for( phy=sis_priv->first_mii; phy; phy=phy->next ){
+ status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
+ status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
+
+ /* Link ON & Not select deafalut PHY */
+ if ( (status & MII_STAT_LINK) && !(default_phy) )
+ default_phy = phy;
+ else{
+ status = mdio_read(net_dev, phy->phy_addr, MII_CONTROL);
+ mdio_write(net_dev, phy->phy_addr, MII_CONTROL,
+ status | MII_CNTL_AUTO | MII_CNTL_ISOLATE);
+ if( phy->phy_types == HOME )
+ phy_home = phy;
+ }
+ }
+
+ if( (!default_phy) && phy_home )
+ default_phy = phy_home;
+ else if(!default_phy)
+ default_phy = sis_priv->first_mii;
+
+ if( sis_priv->mii != default_phy ){
+ sis_priv->mii = default_phy;
+ sis_priv->cur_phy = default_phy->phy_addr;
+ printk(KERN_INFO "%s: Using transceiver found at address %d as default\n", net_dev->name,sis_priv->cur_phy);
+ }
+
+ status = mdio_read(net_dev, sis_priv->cur_phy, MII_CONTROL);
+ status &= (~MII_CNTL_ISOLATE);
+
+ mdio_write(net_dev, sis_priv->cur_phy, MII_CONTROL, status);
+ status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS);
+ status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS);
+
+ return status;
+}
+
+
+/* sis900_set_capability : set the media capability of network adapter */
+static void sis900_set_capability( struct device *net_dev , struct mii_phy *phy )
+{
+ u16 cap;
+ u16 status;
+
+ status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
+ status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
+
+ cap = MII_NWAY_CSMA_CD |
+ ((phy->status & MII_STAT_CAN_TX_FDX)? MII_NWAY_TX_FDX:0) |
+ ((phy->status & MII_STAT_CAN_TX) ? MII_NWAY_TX:0) |
+ ((phy->status & MII_STAT_CAN_T_FDX) ? MII_NWAY_T_FDX:0)|
+ ((phy->status & MII_STAT_CAN_T) ? MII_NWAY_T:0);
+
+ mdio_write( net_dev, phy->phy_addr, MII_ANADV, cap );
+}
+
+
+/* Delay between EEPROM clock transitions. */
+#define eeprom_delay() inl(ee_addr)
+
+/* Read Serial EEPROM through EEPROM Access Register, Note that location is
+ in word (16 bits) unit */
+static u16 read_eeprom(long ioaddr, int location)
+{
+ int i;
+ u16 retval = 0;
+ long ee_addr = ioaddr + mear;
+ u32 read_cmd = location | EEread;
+
+ outl(0, ee_addr);
+ eeprom_delay();
+ outl(EECS, ee_addr);
+ eeprom_delay();
+
+ /* Shift the read command (9) bits out. */
+ for (i = 8; i >= 0; i--) {
+ u32 dataval = (read_cmd & (1 << i)) ? EEDI | EECS : EECS;
+ outl(dataval, ee_addr);
+ eeprom_delay();
+ outl(dataval | EECLK, ee_addr);
+ eeprom_delay();
+ }
+ outb(EECS, ee_addr);
+ eeprom_delay();
+
+ /* read the 16-bits data in */
+ for (i = 16; i > 0; i--) {
+ outl(EECS, ee_addr);
+ eeprom_delay();
+ outl(EECS | EECLK, ee_addr);
+ eeprom_delay();
+ retval = (retval << 1) | ((inl(ee_addr) & EEDO) ? 1 : 0);
+ eeprom_delay();
+ }
+
+ /* Terminate the EEPROM access. */
+ outl(0, ee_addr);
+ eeprom_delay();
+// outl(EECLK, ee_addr);
+
+ return (retval);
+}
+
+/* Read and write the MII management registers using software-generated
+ serial MDIO protocol. Note that the command bits and data bits are
+ send out seperately */
+#define mdio_delay() inl(mdio_addr)
+
+static void mdio_idle(long mdio_addr)
+{
+ outl(MDIO | MDDIR, mdio_addr);
+ mdio_delay();
+ outl(MDIO | MDDIR | MDC, mdio_addr);
+}
+
+/* Syncronize the MII management interface by shifting 32 one bits out. */
+static void mdio_reset(long mdio_addr)
+{
+ int i;
+
+ for (i = 31; i >= 0; i--) {
+ outl(MDDIR | MDIO, mdio_addr);
+ mdio_delay();
+ outl(MDDIR | MDIO | MDC, mdio_addr);
+ mdio_delay();
+ }
+ return;
+}
+
+static u16 mdio_read(struct device *net_dev, int phy_id, int location)
+{
+ long mdio_addr = net_dev->base_addr + mear;
+ int mii_cmd = MIIread|(phy_id<<MIIpmdShift)|(location<<MIIregShift);
+ u16 retval = 0;
+ int i;
+
+ mdio_reset(mdio_addr);
+ mdio_idle(mdio_addr);
+
+ for (i = 15; i >= 0; i--) {
+ int dataval = (mii_cmd & (1 << i)) ? MDDIR | MDIO : MDDIR;
+ outl(dataval, mdio_addr);
+ mdio_delay();
+ outl(dataval | MDC, mdio_addr);
+ mdio_delay();
+ }
+
+ /* Read the 16 data bits. */
+ for (i = 16; i > 0; i--) {
+ outl(0, mdio_addr);
+ mdio_delay();
+ retval = (retval << 1) | ((inl(mdio_addr) & MDIO) ? 1 : 0);
+ outl(MDC, mdio_addr);
+ mdio_delay();
+ }
+ outl(0x00, mdio_addr);
+
+ return retval;
+}
+
+static void mdio_write(struct device *net_dev, int phy_id, int location, int value)
+{
+ long mdio_addr = net_dev->base_addr + mear;
+ int mii_cmd = MIIwrite|(phy_id<<MIIpmdShift)|(location<<MIIregShift);
+ int i;
+
+ mdio_reset(mdio_addr);
+ mdio_idle(mdio_addr);
+
+ /* Shift the command bits out. */
+ for (i = 15; i >= 0; i--) {
+ int dataval = (mii_cmd & (1 << i)) ? MDDIR | MDIO : MDDIR;
+ outb(dataval, mdio_addr);
+ mdio_delay();
+ outb(dataval | MDC, mdio_addr);
+ mdio_delay();
+ }
+ mdio_delay();
+
+ /* Shift the value bits out. */
+ for (i = 15; i >= 0; i--) {
+ int dataval = (value & (1 << i)) ? MDDIR | MDIO : MDDIR;
+ outl(dataval, mdio_addr);
+ mdio_delay();
+ outl(dataval | MDC, mdio_addr);
+ mdio_delay();
+ }
+ mdio_delay();
+
+ /* Clear out extra bits. */
+ for (i = 2; i > 0; i--) {
+ outb(0, mdio_addr);
+ mdio_delay();
+ outb(MDC, mdio_addr);
+ mdio_delay();
+ }
+ outl(0x00, mdio_addr);
+
+ return;
+}
+
+static u16 sis900_reset_phy(struct device *net_dev, int phy_addr)
+{
+ int i = 0;
+ u16 status;
+
+ while (i++ < 2)
+ status = mdio_read(net_dev, phy_addr, MII_STATUS);
+
+ mdio_write( net_dev, phy_addr, MII_CONTROL, MII_CNTL_RESET );
+
+ return status;
+}
+
+static int
+sis900_open(struct device *net_dev)
+{
+ struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv;
+ long ioaddr = net_dev->base_addr;
+ u8 revision;
+
+ /* Soft reset the chip. */
+ sis900_reset(net_dev);
+
+ /* Equalizer workaroung Rule */
+ pcibios_read_config_byte(sis_priv->pci_bus, sis_priv->pci_device_fn, PCI_CLASS_REVISION, &revision);
+ sis630_set_eq(net_dev, revision);
+
+ if (request_irq(net_dev->irq, &sis900_interrupt, SA_SHIRQ, net_dev->name, net_dev)) {
+ return -EAGAIN;
+ }
+
+ MOD_INC_USE_COUNT;
+
+ sis900_init_rxfilter(net_dev);
+
+ sis900_init_tx_ring(net_dev);
+ sis900_init_rx_ring(net_dev);
+
+ set_rx_mode(net_dev);
+
+ net_dev->tbusy = 0;
+ net_dev->interrupt = 0;
+ net_dev->start = 1;
+
+ /* Workaround for EDB */
+ sis900_set_mode(ioaddr, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
+
+ /* Enable all known interrupts by setting the interrupt mask. */
+ outl((RxSOVR|RxORN|RxERR|RxOK|TxURN|TxERR|TxIDLE), ioaddr + imr);
+ outl(RxENA | inl(ioaddr + cr), ioaddr + cr);
+ outl(IE, ioaddr + ier);
+
+ sis900_check_mode(net_dev, sis_priv->mii);
+
+ /* Set the timer to switch to check for link beat and perhaps switch
+ to an alternate media type. */
+ init_timer(&sis_priv->timer);
+ sis_priv->timer.expires = jiffies + HZ;
+ sis_priv->timer.data = (unsigned long)net_dev;
+ sis_priv->timer.function = &sis900_timer;
+ add_timer(&sis_priv->timer);
+
+ return 0;
+}
+
+/* set receive filter address to our MAC address */
+static void
+sis900_init_rxfilter (struct device * net_dev)
+{
+ long ioaddr = net_dev->base_addr;
+ u32 rfcrSave;
+ u32 i;
+
+ rfcrSave = inl(rfcr + ioaddr);
+
+ /* disable packet filtering before setting filter */
+ outl(rfcrSave & ~RFEN, rfcr + ioaddr);
+
+ /* load MAC addr to filter data register */
+ for (i = 0 ; i < 3 ; i++) {
+ u32 w;
+
+ w = (u32) *((u16 *)(net_dev->dev_addr)+i);
+ outl((i << RFADDR_shift), ioaddr + rfcr);
+ outl(w, ioaddr + rfdr);
+
+ if (sis900_debug > 2) {
+ printk(KERN_INFO "%s: Receive Filter Addrss[%d]=%x\n",
+ net_dev->name, i, inl(ioaddr + rfdr));
+ }
+ }
+
+ /* enable packet filitering */
+ outl(rfcrSave | RFEN, rfcr + ioaddr);
+}
+
+/* Initialize the Tx ring. */
+static void
+sis900_init_tx_ring(struct device *net_dev)
+{
+ struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv;
+ long ioaddr = net_dev->base_addr;
+ int i;
+
+ sis_priv->tx_full = 0;
+ sis_priv->dirty_tx = sis_priv->cur_tx = 0;
+
+ for (i = 0; i < NUM_TX_DESC; i++) {
+ sis_priv->tx_skbuff[i] = NULL;
+
+ sis_priv->tx_ring[i].link = (u32) virt_to_bus(&sis_priv->tx_ring[i+1]);
+ sis_priv->tx_ring[i].cmdsts = 0;
+ sis_priv->tx_ring[i].bufptr = 0;
+ }
+ sis_priv->tx_ring[i-1].link = (u32) virt_to_bus(&sis_priv->tx_ring[0]);
+
+ /* load Transmit Descriptor Register */
+ outl(virt_to_bus(&sis_priv->tx_ring[0]), ioaddr + txdp);
+ if (sis900_debug > 2)
+ printk(KERN_INFO "%s: TX descriptor register loaded with: %8.8x\n",
+ net_dev->name, inl(ioaddr + txdp));
+}
+
+/* Initialize the Rx descriptor ring, pre-allocate recevie buffers */
+static void
+sis900_init_rx_ring(struct device *net_dev)
+{
+ struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv;
+ long ioaddr = net_dev->base_addr;
+ int i;
+
+ sis_priv->cur_rx = 0;
+ sis_priv->dirty_rx = 0;
+
+ /* init RX descriptor */
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ sis_priv->rx_skbuff[i] = NULL;
+
+ sis_priv->rx_ring[i].link = (u32) virt_to_bus(&sis_priv->rx_ring[i+1]);
+ sis_priv->rx_ring[i].cmdsts = 0;
+ sis_priv->rx_ring[i].bufptr = 0;
+ }
+ sis_priv->rx_ring[i-1].link = (u32) virt_to_bus(&sis_priv->rx_ring[0]);
+
+ /* allocate sock buffers */
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ struct sk_buff *skb;
+
+ if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
+ /* not enough memory for skbuff, this makes a "hole"
+ on the buffer ring, it is not clear how the
+ hardware will react to this kind of degenerated
+ buffer */
+ break;
+ }
+ skb->dev = net_dev;
+ sis_priv->rx_skbuff[i] = skb;
+ sis_priv->rx_ring[i].cmdsts = RX_BUF_SIZE;
+ sis_priv->rx_ring[i].bufptr = virt_to_bus(skb->tail);
+ }
+ sis_priv->dirty_rx = (unsigned int) (i - NUM_RX_DESC);
+
+ /* load Receive Descriptor Register */
+ outl(virt_to_bus(&sis_priv->rx_ring[0]), ioaddr + rxdp);
+ if (sis900_debug > 2)
+ printk(KERN_INFO "%s: RX descriptor register loaded with: %8.8x\n",
+ net_dev->name, inl(ioaddr + rxdp));
+}
+
+/**
+ * sis630_set_eq: - set phy equalizer value for 630 LAN
+ * @net_dev: the net device to set equalizer value
+ * @revision: 630 LAN revision number
+ *
+ * 630E equalizer workaround rule(Cyrus Huang 08/15)
+ * PHY register 14h(Test)
+ * Bit 14: 0 -- Automatically dectect (default)
+ * 1 -- Manually set Equalizer filter
+ * Bit 13: 0 -- (Default)
+ * 1 -- Speed up convergence of equalizer setting
+ * Bit 9 : 0 -- (Default)
+ * 1 -- Disable Baseline Wander
+ * Bit 3~7 -- Equalizer filter setting
+ * Link ON: Set Bit 9, 13 to 1, Bit 14 to 0
+ * Then calculate equalizer value
+ * Then set equalizer value, and set Bit 14 to 1, Bit 9 to 0
+ * Link Off:Set Bit 13 to 1, Bit 14 to 0
+ * Calculate Equalizer value:
+ * When Link is ON and Bit 14 is 0, SIS900PHY will auto-dectect proper equalizer value.
+ * When the equalizer is stable, this value is not a fixed value. It will be within
+ * a small range(eg. 7~9). Then we get a minimum and a maximum value(eg. min=7, max=9)
+ * 0 <= max <= 4 --> set equalizer to max
+ * 5 <= max <= 14 --> set equalizer to max+1 or set equalizer to max+2 if max == min
+ * max >= 15 --> set equalizer to max+5 or set equalizer to max+6 if max == min
+ */
+
+static void sis630_set_eq(struct device *net_dev, u8 revision)
+{
+ struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv;
+ u16 reg14h, eq_value, max_value=0, min_value=0;
+ u8 host_bridge_rev;
+ int i, maxcount=10;
+ int not_found;
+ u8 pci_bus, pci_device_fn;
+
+ if ( !(revision == SIS630E_900_REV || revision == SIS630EA1_900_REV ||
+ revision == SIS630A_900_REV || revision == SIS630ET_900_REV) )
+ return;
+ not_found = pcibios_find_device(SIS630_VENDOR_ID, SIS630_DEVICE_ID,
+ sis_priv->pci_index,
+ &pci_bus,
+ &pci_device_fn);
+ if (not_found)
+ pcibios_read_config_byte(pci_bus, pci_device_fn, PCI_CLASS_REVISION, &host_bridge_rev);
+
+ if (sis_priv->LinkOn) {
+ reg14h=mdio_read(net_dev, sis_priv->cur_phy, MII_RESV);
+ mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, (0x2200 | reg14h) & 0xBFFF);
+ for (i=0; i < maxcount; i++) {
+ eq_value=(0x00F8 & mdio_read(net_dev, sis_priv->cur_phy, MII_RESV)) >> 3;
+ if (i == 0)
+ max_value=min_value=eq_value;
+ max_value=(eq_value > max_value) ? eq_value : max_value;
+ min_value=(eq_value < min_value) ? eq_value : min_value;
+ }
+ /* 630E rule to determine the equalizer value */
+ if (revision == SIS630E_900_REV || revision == SIS630EA1_900_REV ||
+ revision == SIS630ET_900_REV) {
+ if (max_value < 5)
+ eq_value=max_value;
+ else if (max_value >= 5 && max_value < 15)
+ eq_value=(max_value == min_value) ? max_value+2 : max_value+1;
+ else if (max_value >= 15)
+ eq_value=(max_value == min_value) ? max_value+6 : max_value+5;
+ }
+ /* 630B0&B1 rule to determine the equalizer value */
+ if (revision == SIS630A_900_REV &&
+ (host_bridge_rev == SIS630B0 || host_bridge_rev == SIS630B1)) {
+ if (max_value == 0)
+ eq_value=3;
+ else
+ eq_value=(max_value+min_value+1)/2;
+ }
+ /* write equalizer value and setting */
+ reg14h=mdio_read(net_dev, sis_priv->cur_phy, MII_RESV);
+ reg14h=(reg14h & 0xFF07) | ((eq_value << 3) & 0x00F8);
+ reg14h=(reg14h | 0x6000) & 0xFDFF;
+ mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, reg14h);
+ }
+ else {
+ reg14h=mdio_read(net_dev, sis_priv->cur_phy, MII_RESV);
+ if (revision == SIS630A_900_REV &&
+ (host_bridge_rev == SIS630B0 || host_bridge_rev == SIS630B1))
+ mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, (reg14h | 0x2200) & 0xBFFF);
+ else
+ mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, (reg14h | 0x2000) & 0xBFFF);
+ }
+ return;
+}
+
+
+/* on each timer ticks we check two things, Link Status (ON/OFF) and
+ Link Mode (10/100/Full/Half)
+*/
+static void sis900_timer(unsigned long data)
+{
+ struct device *net_dev = (struct device *)data;
+ struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv;
+ struct mii_phy *mii_phy = sis_priv->mii;
+ static int next_tick = 5*HZ;
+ u16 status;
+ u8 revision;
+
+ if(!sis_priv->autong_complete){
+ int speed, duplex = 0;
+
+ sis900_read_mode(net_dev, &speed, &duplex);
+ if(duplex){
+ sis900_set_mode(net_dev->base_addr, speed, duplex);
+ pcibios_read_config_byte(sis_priv->pci_bus, sis_priv->pci_device_fn, PCI_CLASS_REVISION, &revision);
+ sis630_set_eq(net_dev, revision);
+ }
+
+ sis_priv->timer.expires = jiffies + HZ;
+ add_timer(&sis_priv->timer);
+ return;
+ }
+
+ status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS);
+ status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS);
+
+ /* Link OFF -> ON */
+ if ( !sis_priv->LinkOn ) {
+LookForLink:
+ /* Search for new PHY */
+ status = sis900_default_phy( net_dev );
+ mii_phy = sis_priv->mii;
+
+ if( status & MII_STAT_LINK ){
+ sis900_check_mode(net_dev, mii_phy);
+ sis_priv->LinkOn = TRUE;
+ }
+ }
+ /* Link ON -> OFF */
+ else{
+ if( !(status & MII_STAT_LINK) ){
+ sis_priv->LinkOn = FALSE;
+ printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
+
+ /* Change mode issue */
+ if( (mii_phy->phy_id0 == 0x001D) &&
+ ( (mii_phy->phy_id1 & 0xFFF0) == 0x8000 ))
+ sis900_reset_phy( net_dev, sis_priv->cur_phy );
+
+ pcibios_read_config_byte(sis_priv->pci_bus, sis_priv->pci_device_fn, PCI_CLASS_REVISION, &revision);
+ sis630_set_eq(net_dev, revision);
+
+ goto LookForLink;
+ }
+ }
+
+ sis_priv->timer.expires = jiffies + next_tick;
+ add_timer(&sis_priv->timer);
+}
+
+static void sis900_check_mode (struct device *net_dev, struct mii_phy *mii_phy)
+{
+ struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv;
+ long ioaddr = net_dev->base_addr;
+ int speed, duplex;
+
+ if( mii_phy->phy_types == LAN ){
+ outl( ~EXD & inl( ioaddr + cfg ), ioaddr + cfg);
+ sis900_set_capability(net_dev , mii_phy);
+ sis900_auto_negotiate(net_dev, sis_priv->cur_phy);
+ }else{
+ outl(EXD | inl( ioaddr + cfg ), ioaddr + cfg);
+ speed = HW_SPEED_HOME;
+ duplex = FDX_CAPABLE_HALF_SELECTED;
+ sis900_set_mode(net_dev->base_addr, speed, duplex);
+ sis_priv->autong_complete = 1;
+ }
+}
+
+static void sis900_set_mode (long ioaddr, int speed, int duplex)
+{
+ u32 tx_flags = 0, rx_flags = 0;
+
+ if( inl(ioaddr + cfg) & EDB_MASTER_EN ){
+ tx_flags = TxATP | (DMA_BURST_64 << TxMXDMA_shift) | (TX_FILL_THRESH << TxFILLT_shift);
+ rx_flags = DMA_BURST_64 << RxMXDMA_shift;
+ }
+ else{
+ tx_flags = TxATP | (DMA_BURST_512 << TxMXDMA_shift) | (TX_FILL_THRESH << TxFILLT_shift);
+ rx_flags = DMA_BURST_512 << RxMXDMA_shift;
+ }
+
+ if (speed == HW_SPEED_HOME || speed == HW_SPEED_10_MBPS ) {
+ rx_flags |= (RxDRNT_10 << RxDRNT_shift);
+ tx_flags |= (TxDRNT_10 << TxDRNT_shift);
+ }
+ else {
+ rx_flags |= (RxDRNT_100 << RxDRNT_shift);
+ tx_flags |= (TxDRNT_100 << TxDRNT_shift);
+ }
+
+ if (duplex == FDX_CAPABLE_FULL_SELECTED) {
+ tx_flags |= (TxCSI | TxHBI);
+ rx_flags |= RxATX;
+ }
+
+ outl (tx_flags, ioaddr + txcfg);
+ outl (rx_flags, ioaddr + rxcfg);
+}
+
+
+static void sis900_auto_negotiate(struct device *net_dev, int phy_addr)
+{
+ struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv;
+ int i = 0;
+ u32 status;
+
+ while (i++ < 2)
+ status = mdio_read(net_dev, phy_addr, MII_STATUS);
+
+ if (!(status & MII_STAT_LINK)){
+ printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
+ sis_priv->autong_complete = 1;
+ sis_priv->LinkOn = FALSE;
+ return;
+ }
+
+ /* (Re)start AutoNegotiate */
+ mdio_write(net_dev, phy_addr, MII_CONTROL,
+ MII_CNTL_AUTO | MII_CNTL_RST_AUTO);
+ sis_priv->autong_complete = 0;
+}
+
+
+static void sis900_read_mode(struct device *net_dev, int *speed, int *duplex)
+{
+ struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv;
+ struct mii_phy *phy = sis_priv->mii;
+ int phy_addr = sis_priv->cur_phy;
+ u32 status;
+ u16 autoadv, autorec;
+ int i = 0;
+
+ while (i++ < 2)
+ status = mdio_read(net_dev, phy_addr, MII_STATUS);
+
+ if (!(status & MII_STAT_LINK)) return;
+
+ /* AutoNegotiate completed */
+ autoadv = mdio_read(net_dev, phy_addr, MII_ANADV);
+ autorec = mdio_read(net_dev, phy_addr, MII_ANLPAR);
+ status = autoadv & autorec;
+
+ *speed = HW_SPEED_10_MBPS;
+ *duplex = FDX_CAPABLE_HALF_SELECTED;
+
+ if (status & (MII_NWAY_TX | MII_NWAY_TX_FDX))
+ *speed = HW_SPEED_100_MBPS;
+ if (status & ( MII_NWAY_TX_FDX | MII_NWAY_T_FDX))
+ *duplex = FDX_CAPABLE_FULL_SELECTED;
+
+ sis_priv->autong_complete = 1;
+
+ /* Workaround for Realtek RTL8201 PHY issue */
+ if((phy->phy_id0 == 0x0000) && ((phy->phy_id1 & 0xFFF0) == 0x8200)){
+ if(mdio_read(net_dev, phy_addr, MII_CONTROL) & MII_CNTL_FDX)
+ *duplex = FDX_CAPABLE_FULL_SELECTED;
+ if(mdio_read(net_dev, phy_addr, 0x0019) & 0x01)
+ *speed = HW_SPEED_100_MBPS;
+ }
+
+ printk(KERN_INFO "%s: Media Link On %s %s-duplex \n",
+ net_dev->name,
+ *speed == HW_SPEED_100_MBPS ?
+ "100mbps" : "10mbps",
+ *duplex == FDX_CAPABLE_FULL_SELECTED ?
+ "full" : "half");
+}
+
+
+static void sis900_tx_timeout(struct device *net_dev)
+{
+ struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv;
+ long ioaddr = net_dev->base_addr;
+ int i;
+
+ printk(KERN_INFO "%s: Transmit timeout, status %8.8x %8.8x \n",
+ net_dev->name, inl(ioaddr + cr), inl(ioaddr + isr));
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ outl(0x0000, ioaddr + imr);
+
+ /* discard unsent packets, should this code section be protected by
+ cli(), sti() ?? */
+ sis_priv->dirty_tx = sis_priv->cur_tx = 0;
+ for (i = 0; i < NUM_TX_DESC; i++) {
+ if (sis_priv->tx_skbuff[i] != NULL) {
+ dev_free_skb(sis_priv->tx_skbuff[i]);
+ sis_priv->tx_skbuff[i] = 0;
+ sis_priv->tx_ring[i].cmdsts = 0;
+ sis_priv->tx_ring[i].bufptr = 0;
+ sis_priv->stats.tx_dropped++;
+ }
+ }
+ net_dev->trans_start = jiffies;
+ net_dev->tbusy = sis_priv->tx_full = 0;
+
+ /* FIXME: Should we restart the transmission thread here ?? */
+ outl(TxENA | inl(ioaddr + cr), ioaddr + cr);
+
+ /* Enable all known interrupts by setting the interrupt mask. */
+ outl((RxSOVR|RxORN|RxERR|RxOK|TxURN|TxERR|TxIDLE), ioaddr + imr);
+ return;
+}
+
+static int
+sis900_start_xmit(struct sk_buff *skb, struct device *net_dev)
+{
+ struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv;
+ long ioaddr = net_dev->base_addr;
+ unsigned int entry;
+
+ /* test tbusy to see if we have timeout situation then set it */
+ if (test_and_set_bit(0, (void*)&net_dev->tbusy) != 0) {
+ if (jiffies - net_dev->trans_start > TX_TIMEOUT)
+ sis900_tx_timeout(net_dev);
+ return 1;
+ }
+
+ /* Calculate the next Tx descriptor entry. */
+ entry = sis_priv->cur_tx % NUM_TX_DESC;
+ sis_priv->tx_skbuff[entry] = skb;
+
+ /* set the transmit buffer descriptor and enable Transmit State Machine */
+ sis_priv->tx_ring[entry].bufptr = virt_to_bus(skb->data);
+ sis_priv->tx_ring[entry].cmdsts = (OWN | skb->len);
+ outl(TxENA | inl(ioaddr + cr), ioaddr + cr);
+
+ if (++sis_priv->cur_tx - sis_priv->dirty_tx < NUM_TX_DESC) {
+ /* Typical path, clear tbusy to indicate more
+ transmission is possible */
+ clear_bit(0, (void*)&net_dev->tbusy);
+ } else {
+ /* no more transmit descriptor avaiable, tbusy remain set */
+ sis_priv->tx_full = 1;
+ }
+
+ net_dev->trans_start = jiffies;
+
+ {
+ int i;
+ for (i = 0; i < 100000; i++); /* GRUIIIIIK */
+ }
+
+ if (sis900_debug > 3)
+ printk(KERN_INFO "%s: Queued Tx packet at %p size %d "
+ "to slot %d.\n",
+ net_dev->name, skb->data, (int)skb->len, entry);
+
+ return 0;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+static void sis900_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct device *net_dev = (struct device *)dev_instance;
+ int boguscnt = max_interrupt_work;
+ long ioaddr = net_dev->base_addr;
+ u32 status;
+
+#if defined(__i386__)
+ /* A lock to prevent simultaneous entry bug on Intel SMP machines. */
+ if (test_and_set_bit(0, (void*)&net_dev->interrupt)) {
+ printk(KERN_INFO "%s: SMP simultaneous entry of "
+ "an interrupt handler.\n", net_dev->name);
+ net_dev->interrupt = 0; /* Avoid halting machine. */
+ return;
+ }
+#else
+ if (net_dev->interrupt) {
+ printk(KERN_INFO "%s: Re-entering the interrupt handler.\n",
+ net_dev->name);
+ return;
+ }
+ net_dev->interrupt = 1;
+#endif
+
+ do {
+ status = inl(ioaddr + isr);
+
+ if ((status & (HIBERR|TxURN|TxERR|TxIDLE|RxORN|RxERR|RxOK)) == 0)
+ /* nothing intresting happened */
+ break;
+
+ /* why dow't we break after Tx/Rx case ?? keyword: full-duplex */
+ if (status & (RxORN | RxERR | RxOK))
+ /* Rx interrupt */
+ sis900_rx(net_dev);
+
+ if (status & (TxURN | TxERR | TxIDLE))
+ /* Tx interrupt */
+ sis900_finish_xmit(net_dev);
+
+ /* something strange happened !!! */
+ if (status & HIBERR) {
+ printk(KERN_INFO "%s: Abnormal interrupt,"
+ "status %#8.8x.\n", net_dev->name, status);
+ break;
+ }
+ if (--boguscnt < 0) {
+ printk(KERN_INFO "%s: Too much work at interrupt, "
+ "interrupt status = %#8.8x.\n",
+ net_dev->name, status);
+ break;
+ }
+ } while (1);
+
+ if (sis900_debug > 4)
+ printk(KERN_INFO "%s: exiting interrupt, "
+ "interrupt status = 0x%#8.8x.\n",
+ net_dev->name, inl(ioaddr + isr));
+
+#if defined(__i386__)
+ clear_bit(0, (void*)&net_dev->interrupt);
+#else
+ net_dev->interrupt = 0;
+#endif
+ return;
+}
+
+/* Process receive interrupt events, put buffer to higher layer and refill buffer pool
+ Note: This fucntion is called by interrupt handler, don't do "too much" work here */
+static int sis900_rx(struct device *net_dev)
+{
+ struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv;
+ long ioaddr = net_dev->base_addr;
+ unsigned int entry = sis_priv->cur_rx % NUM_RX_DESC;
+ u32 rx_status = sis_priv->rx_ring[entry].cmdsts;
+
+ if (sis900_debug > 4)
+ printk(KERN_INFO "sis900_rx, cur_rx:%4.4d, dirty_rx:%4.4d "
+ "status:0x%8.8x\n",
+ sis_priv->cur_rx, sis_priv->dirty_rx, rx_status);
+
+ while (rx_status & OWN) {
+ unsigned int rx_size;
+
+ rx_size = (rx_status & DSIZE) - CRC_SIZE;
+
+ if (rx_status & (ABORT|OVERRUN|TOOLONG|RUNT|RXISERR|CRCERR|FAERR)) {
+ /* corrupted packet received */
+ if (sis900_debug > 4)
+ printk(KERN_INFO "%s: Corrupted packet "
+ "received, buffer status = 0x%8.8x.\n",
+ net_dev->name, rx_status);
+ sis_priv->stats.rx_errors++;
+ if (rx_status & OVERRUN)
+ sis_priv->stats.rx_over_errors++;
+ if (rx_status & (TOOLONG|RUNT))
+ sis_priv->stats.rx_length_errors++;
+ if (rx_status & (RXISERR | FAERR))
+ sis_priv->stats.rx_frame_errors++;
+ if (rx_status & CRCERR)
+ sis_priv->stats.rx_crc_errors++;
+ /* reset buffer descriptor state */
+ sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE;
+ } else {
+ struct sk_buff * skb;
+
+ /* This situation should never happen, but due to
+ some unknow bugs, it is possible that
+ we are working on NULL sk_buff :-( */
+ if (sis_priv->rx_skbuff[entry] == NULL) {
+ printk(KERN_INFO "%s: NULL pointer "
+ "encountered in Rx ring, skipping\n",
+ net_dev->name);
+ break;
+ }
+
+ /* gvie the socket buffer to upper layers */
+ skb = sis_priv->rx_skbuff[entry];
+ skb_put(skb, rx_size);
+ skb->protocol = eth_type_trans(skb, net_dev);
+ netif_rx(skb);
+
+ /* some network statistics */
+ if ((rx_status & BCAST) == MCAST)
+ sis_priv->stats.multicast++;
+ net_dev->last_rx = jiffies;
+ /* sis_priv->stats.rx_bytes += rx_size;*/
+ sis_priv->stats.rx_packets++;
+
+ /* refill the Rx buffer, what if there is not enought memory for
+ new socket buffer ?? */
+ if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
+ /* not enough memory for skbuff, this makes a "hole"
+ on the buffer ring, it is not clear how the
+ hardware will react to this kind of degenerated
+ buffer */
+ printk(KERN_INFO "%s: Memory squeeze,"
+ "deferring packet.\n",
+ net_dev->name);
+ sis_priv->rx_skbuff[entry] = NULL;
+ /* reset buffer descriptor state */
+ sis_priv->rx_ring[entry].cmdsts = 0;
+ sis_priv->rx_ring[entry].bufptr = 0;
+ sis_priv->stats.rx_dropped++;
+ break;
+ }
+ skb->dev = net_dev;
+ sis_priv->rx_skbuff[entry] = skb;
+ sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE;
+ sis_priv->rx_ring[entry].bufptr = virt_to_bus(skb->tail);
+ sis_priv->dirty_rx++;
+ }
+ sis_priv->cur_rx++;
+ entry = sis_priv->cur_rx % NUM_RX_DESC;
+ rx_status = sis_priv->rx_ring[entry].cmdsts;
+ } // while
+
+ /* refill the Rx buffer, what if the rate of refilling is slower than
+ consuming ?? */
+ for (;sis_priv->cur_rx - sis_priv->dirty_rx > 0; sis_priv->dirty_rx++) {
+ struct sk_buff *skb;
+
+ entry = sis_priv->dirty_rx % NUM_RX_DESC;
+
+ if (sis_priv->rx_skbuff[entry] == NULL) {
+ if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
+ /* not enough memory for skbuff, this makes a "hole"
+ on the buffer ring, it is not clear how the
+ hardware will react to this kind of degenerated
+ buffer */
+ printk(KERN_INFO "%s: Memory squeeze,"
+ "deferring packet.\n",
+ net_dev->name);
+ sis_priv->stats.rx_dropped++;
+ break;
+ }
+ skb->dev = net_dev;
+ sis_priv->rx_skbuff[entry] = skb;
+ sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE;
+ sis_priv->rx_ring[entry].bufptr = virt_to_bus(skb->tail);
+ }
+ }
+
+ /* re-enable the potentially idle receive state matchine */
+ outl(RxENA | inl(ioaddr + cr), ioaddr + cr );
+
+ return 0;
+}
+
+/* finish up transmission of packets, check for error condition and free skbuff etc.
+ Note: This fucntion is called by interrupt handler, don't do "too much" work here */
+static void sis900_finish_xmit (struct device *net_dev)
+{
+ struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv;
+
+ for (; sis_priv->dirty_tx < sis_priv->cur_tx; sis_priv->dirty_tx++) {
+ unsigned int entry;
+ u32 tx_status;
+
+ entry = sis_priv->dirty_tx % NUM_TX_DESC;
+ tx_status = sis_priv->tx_ring[entry].cmdsts;
+
+ if (tx_status & OWN) {
+ /* The packet is not transmitted yet (owned by hardware) !
+ Note: the interrupt is generated only when Tx Machine
+ is idle, so this is an almost impossible case */
+ break;
+ }
+
+ if (tx_status & (ABORT | UNDERRUN | OWCOLL)) {
+ /* packet unsuccessfully transmitted */
+ if (sis900_debug > 4)
+ printk(KERN_INFO "%s: Transmit "
+ "error, Tx status %8.8x.\n",
+ net_dev->name, tx_status);
+ sis_priv->stats.tx_errors++;
+ if (tx_status & UNDERRUN)
+ sis_priv->stats.tx_fifo_errors++;
+ if (tx_status & ABORT)
+ sis_priv->stats.tx_aborted_errors++;
+ if (tx_status & NOCARRIER)
+ sis_priv->stats.tx_carrier_errors++;
+ if (tx_status & OWCOLL)
+ sis_priv->stats.tx_window_errors++;
+ } else {
+ /* packet successfully transmitted */
+ sis_priv->stats.collisions += (tx_status & COLCNT) >> 16;
+ /* sis_priv->stats.tx_bytes += tx_status & DSIZE;*/
+ sis_priv->stats.tx_packets++;
+ }
+ /* Free the original skb. */
+ dev_free_skb(sis_priv->tx_skbuff[entry]);
+ sis_priv->tx_skbuff[entry] = NULL;
+ sis_priv->tx_ring[entry].bufptr = 0;
+ sis_priv->tx_ring[entry].cmdsts = 0;
+ }
+
+ if (sis_priv->tx_full && net_dev->tbusy &&
+ sis_priv->cur_tx - sis_priv->dirty_tx < NUM_TX_DESC - 4) {
+ /* The ring is no longer full, clear tbusy, tx_full and
+ schedule more transmission by marking NET_BH */
+ sis_priv->tx_full = 0;
+ clear_bit(0, (void *)&net_dev->tbusy);
+ mark_bh(NET_BH);
+ }
+}
+
+static int
+sis900_close(struct device *net_dev)
+{
+ long ioaddr = net_dev->base_addr;
+ struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv;
+ int i;
+
+ net_dev->start = 0;
+ net_dev->tbusy = 1;
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ outl(0x0000, ioaddr + imr);
+ outl(0x0000, ioaddr + ier);
+
+ /* Stop the chip's Tx and Rx Status Machine */
+ outl(RxDIS | TxDIS | inl(ioaddr + cr), ioaddr + cr);
+
+ del_timer(&sis_priv->timer);
+
+ free_irq(net_dev->irq, net_dev);
+
+ /* Free Tx and RX skbuff */
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ if (sis_priv->rx_skbuff[i] != NULL)
+ dev_free_skb(sis_priv->rx_skbuff[i]);
+ sis_priv->rx_skbuff[i] = 0;
+ }
+ for (i = 0; i < NUM_TX_DESC; i++) {
+ if (sis_priv->tx_skbuff[i] != NULL)
+ dev_free_skb(sis_priv->tx_skbuff[i]);
+ sis_priv->tx_skbuff[i] = 0;
+ }
+
+ /* Green! Put the chip in low-power mode. */
+
+ MOD_DEC_USE_COUNT;
+
+ return 0;
+}
+
+static int mii_ioctl(struct device *net_dev, struct ifreq *rq, int cmd)
+{
+ struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv;
+ u16 *data = (u16 *)&rq->ifr_data;
+
+ switch(cmd) {
+ case SIOCDEVPRIVATE: /* Get the address of the PHY in use. */
+ data[0] = sis_priv->mii->phy_addr;
+ /* Fall Through */
+ case SIOCDEVPRIVATE+1: /* Read the specified MII register. */
+ data[3] = mdio_read(net_dev, data[0] & 0x1f, data[1] & 0x1f);
+ return 0;
+ case SIOCDEVPRIVATE+2: /* Write the specified MII register */
+ if (!suser())
+ return -EPERM;
+ mdio_write(net_dev, data[0] & 0x1f, data[1] & 0x1f, data[2]);
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static struct enet_statistics *
+sis900_get_stats(struct device *net_dev)
+{
+ struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv;
+
+ return &sis_priv->stats;
+}
+
+
+/* SiS 900 uses the most sigificant 7 bits to index a 128 bits multicast
+ * hash table, which makes this function a little bit different from other drivers
+ * SiS 900 B0 & 635 M/B uses the most significat 8 bits to index 256 bits
+ * multicast hash table.
+ */
+static u16 sis900_compute_hashtable_index(u8 *addr, u8 revision)
+{
+
+/* what is the correct value of the POLYNOMIAL ??
+ Donald Becker use 0x04C11DB7U
+ Joseph Zbiciak im14u2c@primenet.com gives me the
+ correct answer, thank you Joe !! */
+#define POLYNOMIAL 0x04C11DB7L
+ u32 crc = 0xffffffff, msb;
+ int i, j;
+ u32 byte;
+
+ for (i = 0; i < 6; i++) {
+ byte = *addr++;
+ for (j = 0; j < 8; j++) {
+ msb = crc >> 31;
+ crc <<= 1;
+ if (msb ^ (byte & 1)) {
+ crc ^= POLYNOMIAL;
+ }
+ byte >>= 1;
+ }
+ }
+
+ /* leave 8 or 7 most siginifant bits */
+ if((revision >= SIS635A_900_REV) || (revision == SIS900B_900_REV))
+ return ((int)(crc >> 24));
+ else
+ return ((int)(crc >> 25));
+}
+
+static void set_rx_mode(struct device *net_dev)
+{
+ long ioaddr = net_dev->base_addr;
+ struct sis900_private * sis_priv = (struct sis900_private *)net_dev->priv;
+ u16 mc_filter[16] = {0}; /* 256/128 bits multicast hash table */
+ int i, table_entries;
+ u32 rx_mode;
+ u8 revision;
+
+ /* 635 Hash Table entires = 256(2^16) */
+ pcibios_read_config_byte(sis_priv->pci_bus, sis_priv->pci_device_fn, PCI_CLASS_REVISION, &revision);
+ if((revision >= SIS635A_900_REV) || (revision == SIS900B_900_REV))
+ table_entries = 16;
+ else
+ table_entries = 8;
+
+ if (net_dev->flags & IFF_PROMISC) {
+ /* Accept any kinds of packets */
+ rx_mode = RFPromiscuous;
+ for (i = 0; i < table_entries; i++)
+ mc_filter[i] = 0xffff;
+ } else if ((net_dev->mc_count > multicast_filter_limit) ||
+ (net_dev->flags & IFF_ALLMULTI)) {
+ /* too many multicast addresses or accept all multicast packets */
+ rx_mode = RFAAB | RFAAM;
+ for (i = 0; i < table_entries; i++)
+ mc_filter[i] = 0xffff;
+ } else {
+ /* Accept Broadcast packets, destination addresses match our MAC address,
+ use Receive Filter to reject unwanted MCAST packets */
+ struct dev_mc_list *mclist;
+ rx_mode = RFAAB;
+ for (i = 0, mclist = net_dev->mc_list; mclist && i < net_dev->mc_count;
+ i++, mclist = mclist->next)
+ set_bit(sis900_compute_hashtable_index(mclist->dmi_addr, revision),
+ mc_filter);
+ }
+
+ /* update Multicast Hash Table in Receive Filter */
+ for (i = 0; i < table_entries; i++) {
+ /* why plus 0x04 ??, That makes the correct value for hash table. */
+ outl((u32)(0x00000004+i) << RFADDR_shift, ioaddr + rfcr);
+ outl(mc_filter[i], ioaddr + rfdr);
+ }
+
+ outl(RFEN | rx_mode, ioaddr + rfcr);
+
+ /* sis900 is capatable of looping back packet at MAC level for debugging purpose */
+ if (net_dev->flags & IFF_LOOPBACK) {
+ u32 cr_saved;
+ /* We must disable Tx/Rx before setting loopback mode */
+ cr_saved = inl(ioaddr + cr);
+ outl(cr_saved | TxDIS | RxDIS, ioaddr + cr);
+ /* enable loopback */
+ outl(inl(ioaddr + txcfg) | TxMLB, ioaddr + txcfg);
+ outl(inl(ioaddr + rxcfg) | RxATX, ioaddr + rxcfg);
+ /* restore cr */
+ outl(cr_saved, ioaddr + cr);
+ }
+
+ return;
+}
+
+static void sis900_reset(struct device *net_dev)
+{
+ long ioaddr = net_dev->base_addr;
+ struct sis900_private *sis_priv = (struct sis900_private *)net_dev->priv;
+ int i = 0;
+ u8 revision;
+ u32 status = TxRCMP | RxRCMP;
+
+ outl(0, ioaddr + ier);
+ outl(0, ioaddr + imr);
+ outl(0, ioaddr + rfcr);
+
+ outl(RxRESET | TxRESET | RESET | inl(ioaddr + cr), ioaddr + cr);
+
+ /* Check that the chip has finished the reset. */
+ while (status && (i++ < 1000)) {
+ status ^= (inl(isr + ioaddr) & status);
+ }
+
+ pcibios_read_config_byte(sis_priv->pci_bus, sis_priv->pci_device_fn, PCI_CLASS_REVISION, &revision);
+ if( (revision >= SIS635A_900_REV) || (revision == SIS900B_900_REV) )
+ outl(PESEL | RND_CNT, ioaddr + cfg);
+ else
+ outl(PESEL, ioaddr + cfg);
+}
+
+#ifdef MODULE
+int init_module(void)
+{
+ return sis900_probe(NULL);
+}
+
+void
+cleanup_module(void)
+{
+ /* No need to check MOD_IN_USE, as sys_delete_module() checks. */
+ while (root_sis900_dev) {
+ struct sis900_private *sis_priv =
+ (struct sis900_private *)root_sis900_dev->priv;
+ struct device *next_dev = sis_priv->next_module;
+ struct mii_phy *phy = NULL;
+
+ while(sis_priv->first_mii){
+ phy = sis_priv->first_mii;
+ sis_priv->first_mii = phy->next;
+ kfree(phy);
+ }
+
+ unregister_netdev(root_sis900_dev);
+ release_region(root_sis900_dev->base_addr,
+ sis_priv->mac->io_size);
+ kfree(sis_priv);
+ kfree(root_sis900_dev);
+
+ root_sis900_dev = next_dev;
+ }
+}
+
+#endif /* MODULE */
diff --git a/linux/src/drivers/net/sis900.h b/linux/src/drivers/net/sis900.h
new file mode 100644
index 00000000..21536257
--- /dev/null
+++ b/linux/src/drivers/net/sis900.h
@@ -0,0 +1,284 @@
+/* sis900.h Definitions for SiS ethernet controllers including 7014/7016 and 900
+ * Copyright 1999 Silicon Integrated System Corporation
+ * References:
+ * SiS 7016 Fast Ethernet PCI Bus 10/100 Mbps LAN Controller with OnNow Support,
+ * preliminary Rev. 1.0 Jan. 14, 1998
+ * SiS 900 Fast Ethernet PCI Bus 10/100 Mbps LAN Single Chip with OnNow Support,
+ * preliminary Rev. 1.0 Nov. 10, 1998
+ * SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution,
+ * preliminary Rev. 1.0 Jan. 18, 1998
+ * http://www.sis.com.tw/support/databook.htm
+ */
+
+/* MAC operationl registers of SiS 7016 and SiS 900 ehternet controller */
+/* The I/O extent, SiS 900 needs 256 bytes of io address */
+#define SIS900_TOTAL_SIZE 0x100
+
+/* Symbolic offsets to registers. */
+enum sis900_registers {
+ cr=0x0, //Command Register
+ cfg=0x4, //Configuration Register
+ mear=0x8, //EEPROM Access Register
+ ptscr=0xc, //PCI Test Control Register
+ isr=0x10, //Interrupt Status Register
+ imr=0x14, //Interrupt Mask Register
+ ier=0x18, //Interrupt Enable Register
+ epar=0x18, //Enhanced PHY Access Register
+ txdp=0x20, //Transmit Descriptor Pointer Register
+ txcfg=0x24, //Transmit Configuration Register
+ rxdp=0x30, //Receive Descriptor Pointer Register
+ rxcfg=0x34, //Receive Configuration Register
+ flctrl=0x38, //Flow Control Register
+ rxlen=0x3c, //Receive Packet Length Register
+ rfcr=0x48, //Receive Filter Control Register
+ rfdr=0x4C, //Receive Filter Data Register
+ pmctrl=0xB0, //Power Management Control Register
+ pmer=0xB4 //Power Management Wake-up Event Register
+};
+
+/* Symbolic names for bits in various registers */
+enum sis900_command_register_bits {
+ RELOAD = 0x00000400, ACCESSMODE = 0x00000200,/* ET */
+ RESET = 0x00000100, SWI = 0x00000080, RxRESET = 0x00000020,
+ TxRESET = 0x00000010, RxDIS = 0x00000008, RxENA = 0x00000004,
+ TxDIS = 0x00000002, TxENA = 0x00000001
+};
+
+enum sis900_configuration_register_bits {
+ DESCRFMT = 0x00000100 /* 7016 specific */, REQALG = 0x00000080,
+ SB = 0x00000040, POW = 0x00000020, EXD = 0x00000010,
+ PESEL = 0x00000008, LPM = 0x00000004, BEM = 0x00000001,
+ /* 635 & 900B Specific */
+ RND_CNT = 0x00000400, FAIR_BACKOFF = 0x00000200,
+ EDB_MASTER_EN = 0x00002000
+};
+
+enum sis900_eeprom_access_reigster_bits {
+ MDC = 0x00000040, MDDIR = 0x00000020, MDIO = 0x00000010, /* 7016 specific */
+ EECS = 0x00000008, EECLK = 0x00000004, EEDO = 0x00000002,
+ EEDI = 0x00000001
+};
+
+enum sis900_interrupt_register_bits {
+ WKEVT = 0x10000000, TxPAUSEEND = 0x08000000, TxPAUSE = 0x04000000,
+ TxRCMP = 0x02000000, RxRCMP = 0x01000000, DPERR = 0x00800000,
+ SSERR = 0x00400000, RMABT = 0x00200000, RTABT = 0x00100000,
+ RxSOVR = 0x00010000, HIBERR = 0x00008000, SWINT = 0x00001000,
+ MIBINT = 0x00000800, TxURN = 0x00000400, TxIDLE = 0x00000200,
+ TxERR = 0x00000100, TxDESC = 0x00000080, TxOK = 0x00000040,
+ RxORN = 0x00000020, RxIDLE = 0x00000010, RxEARLY = 0x00000008,
+ RxERR = 0x00000004, RxDESC = 0x00000002, RxOK = 0x00000001
+};
+
+enum sis900_interrupt_enable_reigster_bits {
+ IE = 0x00000001
+};
+
+/* maximum dma burst fro transmission and receive*/
+#define MAX_DMA_RANGE 7 /* actually 0 means MAXIMUM !! */
+#define TxMXDMA_shift 20
+#define RxMXDMA_shift 20
+
+enum sis900_tx_rx_dma{
+ DMA_BURST_512 = 0, DMA_BURST_64 = 5
+};
+
+/* transmit FIFO threshholds */
+#define TX_FILL_THRESH 16 /* 1/4 FIFO size */
+#define TxFILLT_shift 8
+#define TxDRNT_shift 0
+#define TxDRNT_100 48 /* 3/4 FIFO size */
+#define TxDRNT_10 16 /* 1/2 FIFO size */
+
+enum sis900_transmit_config_register_bits {
+ TxCSI = 0x80000000, TxHBI = 0x40000000, TxMLB = 0x20000000,
+ TxATP = 0x10000000, TxIFG = 0x0C000000, TxFILLT = 0x00003F00,
+ TxDRNT = 0x0000003F
+};
+
+/* recevie FIFO thresholds */
+#define RxDRNT_shift 1
+#define RxDRNT_100 16 /* 1/2 FIFO size */
+#define RxDRNT_10 24 /* 3/4 FIFO size */
+
+enum sis900_reveive_config_register_bits {
+ RxAEP = 0x80000000, RxARP = 0x40000000, RxATX = 0x10000000,
+ RxAJAB = 0x08000000, RxDRNT = 0x0000007F
+};
+
+#define RFAA_shift 28
+#define RFADDR_shift 16
+
+enum sis900_receive_filter_control_register_bits {
+ RFEN = 0x80000000, RFAAB = 0x40000000, RFAAM = 0x20000000,
+ RFAAP = 0x10000000, RFPromiscuous = (RFAAB|RFAAM|RFAAP)
+};
+
+enum sis900_reveive_filter_data_mask {
+ RFDAT = 0x0000FFFF
+};
+
+/* EEPROM Addresses */
+enum sis900_eeprom_address {
+ EEPROMSignature = 0x00, EEPROMVendorID = 0x02, EEPROMDeviceID = 0x03,
+ EEPROMMACAddr = 0x08, EEPROMChecksum = 0x0b
+};
+
+/* The EEPROM commands include the alway-set leading bit. Refer to NM93Cxx datasheet */
+enum sis900_eeprom_command {
+ EEread = 0x0180, EEwrite = 0x0140, EEerase = 0x01C0,
+ EEwriteEnable = 0x0130, EEwriteDisable = 0x0100,
+ EEeraseAll = 0x0120, EEwriteAll = 0x0110,
+ EEaddrMask = 0x013F, EEcmdShift = 16
+};
+
+/* For SiS962, request the eeprom software access */
+enum sis962_eeprom_command {
+ EEREQ = 0x00000400, EEDONE = 0x00000200, EEGNT = 0x00000100
+};
+
+/* Manamgement Data I/O (mdio) frame */
+#define MIIread 0x6000
+#define MIIwrite 0x5002
+#define MIIpmdShift 7
+#define MIIregShift 2
+#define MIIcmdLen 16
+#define MIIcmdShift 16
+
+/* Buffer Descriptor Status*/
+enum sis900_buffer_status {
+ OWN = 0x80000000, MORE = 0x40000000, INTR = 0x20000000,
+ SUPCRC = 0x10000000, INCCRC = 0x10000000,
+ OK = 0x08000000, DSIZE = 0x00000FFF
+};
+/* Status for TX Buffers */
+enum sis900_tx_buffer_status {
+ ABORT = 0x04000000, UNDERRUN = 0x02000000, NOCARRIER = 0x01000000,
+ DEFERD = 0x00800000, EXCDEFER = 0x00400000, OWCOLL = 0x00200000,
+ EXCCOLL = 0x00100000, COLCNT = 0x000F0000
+};
+
+enum sis900_rx_bufer_status {
+ OVERRUN = 0x02000000, DEST = 0x00800000, BCAST = 0x01800000,
+ MCAST = 0x01000000, UNIMATCH = 0x00800000, TOOLONG = 0x00400000,
+ RUNT = 0x00200000, RXISERR = 0x00100000, CRCERR = 0x00080000,
+ FAERR = 0x00040000, LOOPBK = 0x00020000, RXCOL = 0x00010000
+};
+
+/* MII register offsets */
+enum mii_registers {
+ MII_CONTROL = 0x0000, MII_STATUS = 0x0001, MII_PHY_ID0 = 0x0002,
+ MII_PHY_ID1 = 0x0003, MII_ANADV = 0x0004, MII_ANLPAR = 0x0005,
+ MII_ANEXT = 0x0006
+};
+
+/* mii registers specific to SiS 900 */
+enum sis_mii_registers {
+ MII_CONFIG1 = 0x0010, MII_CONFIG2 = 0x0011, MII_STSOUT = 0x0012,
+ MII_MASK = 0x0013, MII_RESV = 0x0014
+};
+
+/* mii registers specific to ICS 1893 */
+enum ics_mii_registers {
+ MII_EXTCTRL = 0x0010, MII_QPDSTS = 0x0011, MII_10BTOP = 0x0012,
+ MII_EXTCTRL2 = 0x0013
+};
+
+/* mii registers specific to AMD 79C901 */
+enum amd_mii_registers {
+ MII_STATUS_SUMMARY = 0x0018
+};
+
+/* MII Control register bit definitions. */
+enum mii_control_register_bits {
+ MII_CNTL_FDX = 0x0100, MII_CNTL_RST_AUTO = 0x0200,
+ MII_CNTL_ISOLATE = 0x0400, MII_CNTL_PWRDWN = 0x0800,
+ MII_CNTL_AUTO = 0x1000, MII_CNTL_SPEED = 0x2000,
+ MII_CNTL_LPBK = 0x4000, MII_CNTL_RESET = 0x8000
+};
+
+/* MII Status register bit */
+enum mii_status_register_bits {
+ MII_STAT_EXT = 0x0001, MII_STAT_JAB = 0x0002,
+ MII_STAT_LINK = 0x0004, MII_STAT_CAN_AUTO = 0x0008,
+ MII_STAT_FAULT = 0x0010, MII_STAT_AUTO_DONE = 0x0020,
+ MII_STAT_CAN_T = 0x0800, MII_STAT_CAN_T_FDX = 0x1000,
+ MII_STAT_CAN_TX = 0x2000, MII_STAT_CAN_TX_FDX = 0x4000,
+ MII_STAT_CAN_T4 = 0x8000
+};
+
+#define MII_ID1_OUI_LO 0xFC00 /* low bits of OUI mask */
+#define MII_ID1_MODEL 0x03F0 /* model number */
+#define MII_ID1_REV 0x000F /* model number */
+
+/* MII NWAY Register Bits ...
+ valid for the ANAR (Auto-Negotiation Advertisement) and
+ ANLPAR (Auto-Negotiation Link Partner) registers */
+enum mii_nway_register_bits {
+ MII_NWAY_NODE_SEL = 0x001f, MII_NWAY_CSMA_CD = 0x0001,
+ MII_NWAY_T = 0x0020, MII_NWAY_T_FDX = 0x0040,
+ MII_NWAY_TX = 0x0080, MII_NWAY_TX_FDX = 0x0100,
+ MII_NWAY_T4 = 0x0200, MII_NWAY_PAUSE = 0x0400,
+ MII_NWAY_RF = 0x2000, MII_NWAY_ACK = 0x4000,
+ MII_NWAY_NP = 0x8000
+};
+
+enum mii_stsout_register_bits {
+ MII_STSOUT_LINK_FAIL = 0x4000,
+ MII_STSOUT_SPD = 0x0080, MII_STSOUT_DPLX = 0x0040
+};
+
+enum mii_stsics_register_bits {
+ MII_STSICS_SPD = 0x8000, MII_STSICS_DPLX = 0x4000,
+ MII_STSICS_LINKSTS = 0x0001
+};
+
+enum mii_stssum_register_bits {
+ MII_STSSUM_LINK = 0x0008, MII_STSSUM_DPLX = 0x0004,
+ MII_STSSUM_AUTO = 0x0002, MII_STSSUM_SPD = 0x0001
+};
+
+enum sis900_revision_id {
+ SIS630A_900_REV = 0x80, SIS630E_900_REV = 0x81,
+ SIS630S_900_REV = 0x82, SIS630EA1_900_REV = 0x83,
+ SIS630ET_900_REV = 0x84, SIS635A_900_REV = 0x90,
+ SIS962_900_REV = 0X91, SIS900B_900_REV = 0x03
+};
+
+enum sis630_revision_id {
+ SIS630A0 = 0x00, SIS630A1 = 0x01,
+ SIS630B0 = 0x10, SIS630B1 = 0x11
+};
+
+#define FDX_CAPABLE_DUPLEX_UNKNOWN 0
+#define FDX_CAPABLE_HALF_SELECTED 1
+#define FDX_CAPABLE_FULL_SELECTED 2
+
+#define HW_SPEED_UNCONFIG 0
+#define HW_SPEED_HOME 1
+#define HW_SPEED_10_MBPS 10
+#define HW_SPEED_100_MBPS 100
+#define HW_SPEED_DEFAULT (HW_SPEED_100_MBPS)
+
+#define CRC_SIZE 4
+#define MAC_HEADER_SIZE 14
+
+#define TX_BUF_SIZE 1536
+#define RX_BUF_SIZE 1536
+
+#define NUM_TX_DESC 16 /* Number of Tx descriptor registers. */
+#define NUM_RX_DESC 16 /* Number of Rx descriptor registers. */
+
+#define TRUE 1
+#define FALSE 0
+
+/* PCI stuff, should be move to pic.h */
+#define PCI_DEVICE_ID_SI_900 0x900
+#define PCI_DEVICE_ID_SI_7016 0x7016
+#define SIS630_VENDOR_ID 0x1039
+#define SIS630_DEVICE_ID 0x0630
+
+/* ioctl for accessing MII transveiver */
+#define SIOCGMIIPHY (SIOCDEVPRIVATE) /* Get the PHY in use. */
+#define SIOCGMIIREG (SIOCDEVPRIVATE+1) /* Read a PHY register. */
+#define SIOCSMIIREG (SIOCDEVPRIVATE+2) /* Write a PHY register */
diff --git a/linux/src/drivers/net/sundance.c b/linux/src/drivers/net/sundance.c
index cb8dfe52..47f32ebd 100644
--- a/linux/src/drivers/net/sundance.c
+++ b/linux/src/drivers/net/sundance.c
@@ -986,7 +986,7 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev)
dev->trans_start = jiffies;
if (np->msg_level & NETIF_MSG_TX_QUEUED) {
- printk(KERN_DEBUG "%s: Transmit frame #%d len %d queued in slot %d.\n",
+ printk(KERN_DEBUG "%s: Transmit frame #%d len %ld queued in slot %ld.\n",
dev->name, np->cur_tx, skb->len, entry);
}
return 0;
diff --git a/linux/src/drivers/pci/pci.c b/linux/src/drivers/pci/pci.c
index bb79cc47..cf7dd807 100644
--- a/linux/src/drivers/pci/pci.c
+++ b/linux/src/drivers/pci/pci.c
@@ -1121,10 +1121,8 @@ static unsigned int scan_bus(struct pci_bus *bus, unsigned long *mem_startp)
pcibios_read_config_dword(bus->number, devfn, PCI_VENDOR_ID, &l);
/* some broken boards return 0 if a slot is empty: */
- if (l == 0xffffffff || l == 0x00000000) {
- is_multi = 0;
+ if (l == 0xffffffff || l == 0x00000000 || l == 0x0000ffff || l == 0xffff0000)
continue;
- }
dev = pci_malloc(sizeof(*dev), mem_startp);
dev->bus = bus;
diff --git a/linux/src/drivers/scsi/aha1542.c b/linux/src/drivers/scsi/aha1542.c
index 0366fd31..68954d75 100644
--- a/linux/src/drivers/scsi/aha1542.c
+++ b/linux/src/drivers/scsi/aha1542.c
@@ -120,8 +120,8 @@ static int aha1542_restart(struct Scsi_Host * shost);
#define aha1542_intr_reset(base) outb(IRST, CONTROL(base))
#define WAIT(port, mask, allof, noneof) \
- { register WAITbits; \
- register WAITtimeout = WAITnexttimeout; \
+ { register int WAITbits; \
+ register int WAITtimeout = WAITnexttimeout; \
while (1) { \
WAITbits = inb(port) & (mask); \
if ((WAITbits & (allof)) == (allof) && ((WAITbits & (noneof)) == 0)) \
@@ -133,8 +133,8 @@ static int aha1542_restart(struct Scsi_Host * shost);
/* Similar to WAIT, except we use the udelay call to regulate the
amount of time we wait. */
#define WAITd(port, mask, allof, noneof, timeout) \
- { register WAITbits; \
- register WAITtimeout = timeout; \
+ { register int WAITbits; \
+ register int WAITtimeout = timeout; \
while (1) { \
WAITbits = inb(port) & (mask); \
if ((WAITbits & (allof)) == (allof) && ((WAITbits & (noneof)) == 0)) \
diff --git a/linux/src/drivers/scsi/eata.c b/linux/src/drivers/scsi/eata.c
index 8d7ba083..ce859ced 100644
--- a/linux/src/drivers/scsi/eata.c
+++ b/linux/src/drivers/scsi/eata.c
@@ -881,6 +881,8 @@ __initfunc (static inline int port_detect \
sprintf(name, "%s%d", driver_name, j);
+ printk("probing eata on %lx\n", port_base);
+
if(check_region(port_base, REGION_SIZE)) {
printk("%s: address 0x%03lx in use, skipping probe.\n", name, port_base);
return FALSE;
diff --git a/linux/src/include/asm-i386/segment.h b/linux/src/include/asm-i386/segment.h
index 6052ad45..5f8af993 100644
--- a/linux/src/include/asm-i386/segment.h
+++ b/linux/src/include/asm-i386/segment.h
@@ -1,12 +1,21 @@
#ifndef _ASM_SEGMENT_H
#define _ASM_SEGMENT_H
+#ifdef MACH
+
+#include <machine/gdt.h>
+#include <machine/ldt.h>
+
+#else /* !MACH */
+
#define KERNEL_CS 0x10
#define KERNEL_DS 0x18
#define USER_CS 0x23
#define USER_DS 0x2B
+#endif /* !MACH */
+
#ifndef __ASSEMBLY__
/*
@@ -32,7 +41,7 @@ struct __segment_dummy { unsigned long a[100]; };
#define __sd(x) ((struct __segment_dummy *) (x))
#define __const_sd(x) ((const struct __segment_dummy *) (x))
-static inline void __put_user(unsigned long x, void * y, int size)
+static inline void __attribute__((always_inline)) __put_user(unsigned long x, void * y, int size)
{
switch (size) {
case 1:
@@ -55,7 +64,7 @@ static inline void __put_user(unsigned long x, void * y, int size)
}
}
-static inline unsigned long __get_user(const void * y, int size)
+static inline unsigned long __attribute__((always_inline)) __get_user(const void * y, int size)
{
unsigned long result;
@@ -80,27 +89,28 @@ static inline unsigned long __get_user(const void * y, int size)
}
}
+#if defined(__GNUC__) && (__GNUC__ == 2) && (__GNUC_MINOR__ < 95)
static inline void __generic_memcpy_tofs(void * to, const void * from, unsigned long n)
{
__asm__ volatile
- (" cld
- push %%es
- push %%fs
- cmpl $3,%0
- pop %%es
- jbe 1f
- movl %%edi,%%ecx
- negl %%ecx
- andl $3,%%ecx
- subl %%ecx,%0
- rep; movsb
- movl %0,%%ecx
- shrl $2,%%ecx
- rep; movsl
- andl $3,%0
- 1: movl %0,%%ecx
- rep; movsb
- pop %%es"
+ ("cld\n"
+ "push %%es\n"
+ "push %%fs\n"
+ "cmpl $3,%0\n"
+ "pop %%es\n"
+ "jbe 1f\n"
+ "movl %%edi,%%ecx\n"
+ "negl %%ecx\n"
+ "andl $3,%%ecx\n"
+ "subl %%ecx,%0\n"
+ "rep; movsb\n"
+ "movl %0,%%ecx\n"
+ "shrl $2,%%ecx\n"
+ "rep; movsl\n"
+ "andl $3,%0\n"
+ "1: movl %0,%%ecx\n"
+ "rep; movsb\n"
+ "pop %%es\n"
:"=abd" (n)
:"0" (n),"D" ((long) to),"S" ((long) from)
:"cx","di","si");
@@ -171,24 +181,24 @@ __asm__("cld\n\t" \
static inline void __generic_memcpy_fromfs(void * to, const void * from, unsigned long n)
{
- __asm__ volatile
- (" cld
- cmpl $3,%0
- jbe 1f
- movl %%edi,%%ecx
- negl %%ecx
- andl $3,%%ecx
- subl %%ecx,%0
- fs; rep; movsb
- movl %0,%%ecx
- shrl $2,%%ecx
- fs; rep; movsl
- andl $3,%0
- 1: movl %0,%%ecx
- fs; rep; movsb"
- :"=abd" (n)
- :"0" (n),"D" ((long) to),"S" ((long) from)
- :"cx","di","si", "memory");
+ __asm__ volatile
+ ("cld\n"
+ "cmpl $3,%0\n"
+ "jbe 1f\n"
+ "movl %%edi,%%ecx\n"
+ "negl %%ecx\n"
+ "andl $3,%%ecx\n"
+ "subl %%ecx,%0\n"
+ "fs; rep; movsb\n"
+ "movl %0,%%ecx\n"
+ "shrl $2,%%ecx\n"
+ "fs; rep; movsl\n"
+ "andl $3,%0\n"
+ "1:movl %0,%%ecx\n"
+ "fs; rep; movsb\n"
+ :"=abd" (n)
+ :"0" (n),"D" ((long) to),"S" ((long) from)
+ :"cx","di","si", "memory");
}
static inline void __constant_memcpy_fromfs(void * to, const void * from, unsigned long n)
@@ -260,6 +270,29 @@ __asm__("cld\n\t" \
__constant_memcpy_tofs((to),(from),(n)) : \
__generic_memcpy_tofs((to),(from),(n)))
+
+#else /* code for gcc-2.95.x and newer follows */
+
+static inline void memcpy_fromfs(void * to, const void * from, unsigned long n)
+{
+ char *d = (char *)to;
+ const char *s = (const char *)from;
+ while (n-- > 0) {
+ *d++ = __get_user(s++, 1);
+ }
+}
+
+static inline void memcpy_tofs(void * to, const void * from, unsigned long n)
+{
+ char *d = (char *)to;
+ const char *s = (const char *)from;
+ while (n-- > 0) {
+ __put_user(*s++, d++, 1);
+ }
+}
+
+#endif /* not gcc-2.95 */
+
/*
* These are deprecated..
*
diff --git a/linux/src/include/linux/tqueue.h b/linux/src/include/linux/tqueue.h
index 8bd4e7f3..d38e1df5 100644
--- a/linux/src/include/linux/tqueue.h
+++ b/linux/src/include/linux/tqueue.h
@@ -79,7 +79,7 @@ extern task_queue tq_timer, tq_immediate, tq_scheduler, tq_disk;
* "bh_list". You may call this function only from an interrupt
* handler or a bottom half handler.
*/
-extern __inline__ void queue_task_irq(struct tq_struct *bh_pointer,
+static __inline__ void queue_task_irq(struct tq_struct *bh_pointer,
task_queue *bh_list)
{
if (!set_bit(0,&bh_pointer->sync)) {
@@ -92,7 +92,7 @@ extern __inline__ void queue_task_irq(struct tq_struct *bh_pointer,
* queue_task_irq_off: put the bottom half handler "bh_pointer" on the list
* "bh_list". You may call this function only when interrupts are off.
*/
-extern __inline__ void queue_task_irq_off(struct tq_struct *bh_pointer,
+static __inline__ void queue_task_irq_off(struct tq_struct *bh_pointer,
task_queue *bh_list)
{
if (!(bh_pointer->sync & 1)) {
@@ -106,7 +106,7 @@ extern __inline__ void queue_task_irq_off(struct tq_struct *bh_pointer,
/*
* queue_task: as queue_task_irq, but can be called from anywhere.
*/
-extern __inline__ void queue_task(struct tq_struct *bh_pointer,
+static __inline__ void queue_task(struct tq_struct *bh_pointer,
task_queue *bh_list)
{
if (!set_bit(0,&bh_pointer->sync)) {
@@ -122,7 +122,7 @@ extern __inline__ void queue_task(struct tq_struct *bh_pointer,
/*
* Call all "bottom halfs" on a given list.
*/
-extern __inline__ void run_task_queue(task_queue *list)
+static __inline__ void run_task_queue(task_queue *list)
{
struct tq_struct *p;
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 05:36:57 +0000