| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Mark internal nss symbols with attribute_hidden to allow direct access
within libc.so and libc.a without using GOT nor PLT.
Tested on x86-64 with and without --disable-nscd.
[BZ #18822]
* grp/initgroups.c (__nss_group_database): Removed.
(__nss_initgroups_database): Likewise.
* nscd/gai.c (__nss_hosts_database): Likewise.
* nss/XXX-lookup.c (DATABASE_NAME_SYMBOL): Likewise.
* posix/tst-rfc3484-2.c (__nss_hosts_database): Likewise.
* posix/tst-rfc3484-3.c (__nss_hosts_database): Likewise.
* posix/tst-rfc3484.c (__nss_hosts_database): Likewise.
* sysdeps/posix/getaddrinfo.c (__nss_hosts_database): Likewise.
* nss/getXXent.c (INTERNAL (REENTRANT_GETNAME)): Add
attribute_hidden.
* nss/nsswitch.c (__nss_database_custom): Define only if
USE_NSCD is defined.
(__nss_configure_lookup): Use __nss_database_custom only if
USE_NSCD is defined.
* nss/nsswitch.h (__nss_database_custom): Declare only if
USE_NSCD is defined. Add attribute_hidden.
(__nss_setent): Add attribute_hidden.
(__nss_endent): Likewise.
(__nss_getent_r): Likewise.
(__nss_getent): Likewise.
(DEFINE_DATABASE): Declare __nss_##arg##_database.
|
|
qsort_r is defined in the same file as qsort, but is not an ISO C
function, so should be a weak alias for __qsort_r. The uses in
getaddrinfo should also call __qsort_r, since getaddrinfo is a POSIX
function and qsort_r isn't. This patch implements this. Because nscd
uses the getaddrinfo sources outside libc, as do the tst-rfc3484
tests, a #define of __qsort_r to qsort_r is added there alongside the
similar defines for other libc-internal symbols used in getaddrinfo.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch).
[BZ #17571]
* stdlib/msort.c (qsort_r): Rename to __qsort_r and define as weak
alias of __qsort_r.
(qsort): Call __qsort_r instead of qsort_r.
* include/stdlib.h (qsort_r): Do not call libc_hidden_proto.
(__qsort_r): Declare. Call libc_hidden_proto.
* sysdeps/posix/getaddrinfo.c (getaddrinfo): Call __qsort_r
instead of qsort_r.
* nscd/gai.c (__qsort_r): Define to qsort_r.
* posix/tst-rfc3484.c (__qsort_r): Likewise.
* posix/tst-rfc3484-2.c (__qsort_r): Likewise.
* posix/tst-rfc3484-3.c (__qsort_r): Likewise.
|
|
|
|
* sysdeps/posix/getaddrinfo.c (default_scopes): Map RFC 1918
* addresses
to global scope.
* posix/tst-rfc3484.c: Verify 10/8, 172.16/12 and 196.128/16
addresses are in the same scope as 192.0.2/24.
* posix/gai.conf: Document new scope table defaults.
|
|
|
|
|
|
The posix/tst-rfc3484* test cases caused warnings in newer gccs
because the unused but copied sin_zero part of sockaddr_in wasn't
explicitly initialized.
|
|
opr.ctx_type.
(calc_first): Initialize constraint field.
(duplicate_node_closure): Use it instead of special casing ANCHORS.
Use search_duplicated_node to avoid loops. Fix grammar.
(duplicate_node): Merge constraint field for all node types.
(calc_eclosure_iter): Look at constraint field for all node types.
* posix/regex_internal.c (create_cd_newstate): Don't look at
create_cd_newstate.
* posix/tst-rfc3484.c: Add dummy definition of _res_hconf_init.
* posix/tst-rfc3484-2.c: Likewise.
* posix/tst-rfc3484-3.c: Likewise.
|
|
field. Use sockaddr_in6 for source_addr.
(get_scope): Change type of parameter to sockaddr_in6. Adjust.
(match_prefix): Likewise.
(get_label): Likewise.
(get_precedence): Likewise.
(rfc3484_sort): Change to use indirect access to results array.
Adjust to use of sockaddr_in6. Replace service_order test with
simple index comparison.
(getaddrinfo): Define order array. Initialize it. Don't initialize
service_order field. Adjust qsort_t calls. Access sorted result
array indirectly through order array.
* posix/tst-rfc3484.c: Adjust for change of rfc3484_sort.
* posix/tst-rfc3484-2.c: Likewise.
* posix/tst-rfc3484-3.c: Likewise.
|
|
(get_scope): For IPv4 scope, use scopes table.
(fini): Free scopes table if necessary.
(free_scopelist): New function.
(scopecmp): New function.
(gaiconf_init): Also handle scopev4 entries.
* posix/tst-rfc3484.c (do_test): Initialize scopes.
* posix/tst-rfc3484-2.c (do_test): Likewise.
* posix/gai.conf: Document scopev4 defaults.
* posix/Makefile (tests): Add tst-rfc3484-3.
* posix/tst-rfc3484-3.c: New file.
|
|
(struct in6addrinfo): Add index element.
Declare __check_native.
* inet/Makefile (aux): Add check_native.
* sysdeps/unix/sysv/linux/check_native.c: New file.
* sysdeps/unix/sysv/linux/check_pf.c: No need to recognize
IFA_F_TEMPORARY. Pass back ifa_index.
* sysdeps/posix/getaddrinfo.c: Remove netlink compatibility code.
(rfc3484_sort): Add new parameter. Implement rule 7 correctly:
call __check_native if necessary.
(getaddrinfo): Fill in index field. Use qsort_r instead of qsort
to sort addresses. Pass information about the results.
* posix/tst-rfc3484.c: Adjust for addition of index field and change
of rfc3484_sort interface.
* posix/tst-rfc3484-2.c: Likewise.
|
|
* posix/tst-rfc3484-2.c: Likewise.
|
|
|
|
* posix/tst-rfc3484-2.c (__idna_to_unicode_lzlz): Likewise.
|
|
handling. /etc/gai.conf can contain replacements for the label
and precedence table. Fix byte order of default label and
precedence table.
* posix/gai.conf: New file.
* posix/tst-rfc3484.c: Adjust for changes to getaddrinfo.c.
* posix/tst-rfc3484-2.c: Likewise.
|
|
field.
* posix/tst-rfc3484-2.c (do_test): Likewise.
|
|
* posix/tst-rfc3484-2.c: Likewise.
|
|
* posix/tst-rfc3484.c: Update fake __check_pf implementation.
* posix/tst-rfc3484-2.c: Likewise.
|
|
* sysdeps/posix/getaddrinfo.c (fls): New function.
(gaih_inet): Don't use ffs, use fls. Convert address to native byte
order first.
* posix/Makefile (tests): Add tst-rfc3484.
* posix/tst-rfc3484.c: New file.
|
|
|
|
|
