diff options
Diffstat (limited to 'sysdeps/unix/bsd/sun/sunos4/bits/termios.h')
| -rw-r--r-- | sysdeps/unix/bsd/sun/sunos4/bits/termios.h | 212 |
1 files changed, 0 insertions, 212 deletions
diff --git a/sysdeps/unix/bsd/sun/sunos4/bits/termios.h b/sysdeps/unix/bsd/sun/sunos4/bits/termios.h deleted file mode 100644 index 97612c8f0b..0000000000 --- a/sysdeps/unix/bsd/sun/sunos4/bits/termios.h +++ /dev/null @@ -1,212 +0,0 @@ -/* termios type and macro definitions. SunOS 4 version. - Copyright (C) 1993, 1994, 1996, 1997 Free Software Foundation, Inc. - This file is part of the GNU C Library. - - The GNU C Library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - The GNU C Library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with the GNU C Library; if not, write to the Free - Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA - 02111-1307 USA. */ - -#ifndef _TERMIOS_H -# error "Never include <bits/termios.h> directly; use <termios.h> instead." -#endif - -/* Type of terminal control flag masks. */ -typedef unsigned long int tcflag_t; - -/* Type of control characters. */ -typedef unsigned char cc_t; - -/* Type of baud rate specifiers. */ -typedef unsigned int speed_t; - -/* Terminal control structure. */ -struct termios -{ - /* Input modes. */ - tcflag_t c_iflag; -#define IGNBRK 0x0001 /* Ignore break condition. */ -#define BRKINT 0x0002 /* Signal interrupt on break. */ -#define IGNPAR 0x0004 /* Ignore characters with parity errors. */ -#define PARMRK 0x0008 /* Mark parity and framing errors. */ -#define INPCK 0x0010 /* Enable input parity check. */ -#define ISTRIP 0x0020 /* Strip 8th bit off characters. */ -#define INLCR 0x0040 /* Map NL to CR on input. */ -#define IGNCR 0x0080 /* Ignore CR. */ -#define ICRNL 0x0100 /* Map CR to NL on input. */ -#ifdef __USE_BSD -# define IUCLC 0x0200 /* Map upper case to lower case on input. */ -#endif -#define IXON 0x0400 /* Enable start/stop output control. */ -#define IXOFF 0x1000 /* Enable start/stop input control. */ -#ifdef __USE_BSD -# define IXANY 0x0800 /* Any character will restart after stop. */ -# define IMAXBEL 0x2000 /* Ring bell when input queue is full. */ -#endif - - /* Output modes. */ - tcflag_t c_oflag; -#define OPOST 0x0001 /* Perform output processing. */ -#ifdef __USE_BSD -# define OLCUC 0x00000002 /* Map lower case to upper case on output. */ -# define ONLCR 0x00000004 /* Map NL to CR-NL on output. */ -# define OCRNL 0x00000008 -# define ONOCR 0x00000010 -# define ONLRET 0x00000020 -# define OFILL 0x00000040 -# define OFDEL 0x00000080 -# define NLDLY 0x00000100 -# define NL0 0 -# define NL1 0x00000100 -# define CRDLY 0x00000600 -# define CR0 0 -# define CR1 0x00000200 -# define CR2 0x00000400 -# define CR3 0x00000600 -# define TABDLY 0x00001800 -# define TAB0 0 -# define TAB1 0x00000800 -# define TAB2 0x00001000 -# define XTABS 0x00001800 -# define TAB3 XTABS -# define BSDLY 0x00002000 -# define BS0 0 -# define BS1 0x00002000 -# define VTDLY 0x00004000 -# define VT0 0 -# define VT1 0x00004000 -# define FFDLY 0x00008000 -# define FF0 0 -# define FF1 0x00008000 -# define PAGEOUT 0x00010000 -# define WRAP 0x00020000 -#endif - - /* Control modes. */ - tcflag_t c_cflag; -#define CSIZE (CS5|CS6|CS7|CS8) /* Number of bits per byte (mask). */ -#define CS5 0 /* 5 bits per byte. */ -#define CS6 0x00000010 /* 6 bits per byte. */ -#define CS7 0x00000020 /* 7 bits per byte. */ -#define CS8 0x00000030 /* 8 bits per byte. */ -#define CSTOPB 0x00000040 /* Two stop bits instead of one. */ -#define CREAD 0x00000080 /* Enable receiver. */ -#define PARENB 0x00000100 /* Parity enable. */ -#define PARODD 0x00000200 /* Odd parity instead of even. */ -#define HUPCL 0x00000400 /* Hang up on last close. */ -#define CLOCAL 0x00000800 /* Ignore modem status lines. */ -#ifdef __USE_BSD -# define LOBLK 0x00001000 -# define CRTSCTS 0x80000000 -# define CIBAUD 0x000f0000 /* Mask for input speed from c_cflag. */ -# define CBAUD 0x0000000f /* Mask for output speed from c_cflag. */ -# define IBSHIFT 16 /* Bits to shift for input speed. */ -#endif - - /* Input and output baud rates. These are encoded in c_cflag. */ -#define B0 0 -#define B50 1 -#define B75 2 -#define B110 3 -#define B134 4 -#define B150 5 -#define B200 6 -#define B300 7 -#define B600 8 -#define B1200 9 -#define B1800 10 -#define B2400 11 -#define B4800 12 -#define B9600 13 -#define B19200 14 -#define B38400 15 -#ifdef __USE_BSD -# define EXTA 14 -# define EXTB 15 -#endif - - /* Local modes. */ - tcflag_t c_lflag; -#ifdef __USE_BSD -# define ECHOKE 0x00000800 /* Visual erase for KILL. */ -#endif -#define ECHOE 0x00000010 /* Visual erase for ERASE. */ -#define ECHOK 0x00000020 /* Echo NL after KILL. */ -#define ECHO 0x00000008 /* Enable echo. */ -#define ECHONL 0x00000040 /* Echo NL even if ECHO is off. */ -#ifdef __USE_BSD -# define ECHOPRT 0x00000400 /* Hardcopy visual erase. */ -# define ECHOCTL 0x00000200 /* Echo control characters as ^X. */ -#endif -#define ISIG 0x00000001 /* Enable signals. */ -#define ICANON 0x00000002 /* Do erase and kill processing. */ -#define IEXTEN 0x00008000 /* Enable DISCARD and LNEXT. */ -#define TOSTOP 0x00000100 /* Send SIGTTOU for background output. */ -#ifdef __USE_BSD -# define PENDIN 0x00004000 /* Retype pending input (state). */ -#endif -#define NOFLSH 0x00000080 /* Disable flush after interrupt. */ - - char c_line; /* Line discipline (?) */ - - /* Control characters. */ -#define VEOF 4 /* End-of-file character [ICANON]. */ -#define VEOL 5 /* End-of-line character [ICANON]. */ -#ifdef __USE_BSD -# define VEOL2 6 /* Second EOL character [ICANON]. */ -# define VSWTCH 7 /* ??? */ -#endif -#define VERASE 2 /* Erase character [ICANON]. */ -#ifdef __USE_BSD -# define VWERASE 14 /* Word-erase character [ICANON]. */ -#endif -#define VKILL 3 /* Kill-line character [ICANON]. */ -#ifdef __USE_BSD -# define VREPRINT 12 /* Reprint-line character [ICANON]. */ -#endif -#define VINTR 0 /* Interrupt character [ISIG]. */ -#define VQUIT 1 /* Quit character [ISIG]. */ -#define VSUSP 10 /* Suspend character [ISIG]. */ -#ifdef __USE_BSD -# define VDSUSP 11 /* Delayed suspend character [ISIG]. */ -#endif -#define VSTART 8 /* Start (X-ON) character [IXON, IXOFF]. */ -#define VSTOP 9 /* Stop (X-OFF) character [IXON, IXOFF]. */ -#ifdef __USE_BSD -# define VLNEXT 15 /* Literal-next character [IEXTEN]. */ -# define VDISCARD 13 /* Discard character [IEXTEN]. */ -#endif -#define VMIN VEOF /* Minimum number of bytes read at once [!ICANON]. */ -#define VTIME VEOL /* Time-out value (tenths of a second) [!ICANON]. */ -#define NCCS 17 - cc_t c_cc[NCCS]; -}; - -#define _IOT_termios /* Hurd ioctl type field. */ \ - _IOT (_IOTS (cflag_t), 4, _IOTS (cc_t), NCCS, _IOTS (speed_t), 2) - -/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'. */ -#define TCSANOW 0 /* Change immediately. */ -#define TCSADRAIN 1 /* Change when pending output is written. */ -#define TCSAFLUSH 2 /* Flush pending input before changing. */ - -/* Values for the QUEUE_SELECTOR argument to `tcflush'. */ -#define TCIFLUSH 0 /* Discard data received but not yet read. */ -#define TCOFLUSH 1 /* Discard data written but not yet sent. */ -#define TCIOFLUSH 2 /* Discard all pending data. */ - -/* Values for the ACTION argument to `tcflow'. */ -#define TCOOFF 0 /* Suspend output. */ -#define TCOON 1 /* Restart suspended output. */ -#define TCIOFF 2 /* Send a STOP character. */ -#define TCION 3 /* Send a START character. */ |