diff options
Diffstat (limited to 'sysdeps/powerpc/powerpc32/power4')
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/Makefile | 6 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/fpu/Makefile | 5 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/fpu/mpa.c | 549 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/fpu/s_llrint.S | 47 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/fpu/s_llrintf.S | 39 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S | 97 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/fpu/s_llroundf.S | 1 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/fpu/slowexp.c | 66 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/fpu/slowpow.c | 94 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt.c | 62 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf.c | 60 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/memcmp.S | 986 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/memcopy.h | 113 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/memcpy.S | 426 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/memset.S | 229 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/strncmp.S | 176 | ||||
| -rw-r--r-- | sysdeps/powerpc/powerpc32/power4/wordcopy.c | 209 |
17 files changed, 3165 insertions, 0 deletions
diff --git a/sysdeps/powerpc/powerpc32/power4/Makefile b/sysdeps/powerpc/powerpc32/power4/Makefile new file mode 100644 index 0000000000..60aa508ba4 --- /dev/null +++ b/sysdeps/powerpc/powerpc32/power4/Makefile @@ -0,0 +1,6 @@ +# Makefile fragment for POWER4/5/5+. + +ifeq ($(subdir),string) +CFLAGS-wordcopy.c += --param max-variable-expansions-in-unroller=2 --param max-unroll-times=2 -funroll-loops -fpeel-loops -ftree-loop-linear +CFLAGS-memmove.c += --param max-variable-expansions-in-unroller=2 --param max-unroll-times=2 -funroll-loops -fpeel-loops -ftree-loop-linear +endif diff --git a/sysdeps/powerpc/powerpc32/power4/fpu/Makefile b/sysdeps/powerpc/powerpc32/power4/fpu/Makefile new file mode 100644 index 0000000000..a6fa75ecbc --- /dev/null +++ b/sysdeps/powerpc/powerpc32/power4/fpu/Makefile @@ -0,0 +1,5 @@ +# Makefile fragment for POWER4/5/5+ with FPU. + +ifeq ($(subdir),math) +CFLAGS-mpa.c += --param max-unroll-times=4 -funroll-loops -fpeel-loops -ftree-loop-linear +endif diff --git a/sysdeps/powerpc/powerpc32/power4/fpu/mpa.c b/sysdeps/powerpc/powerpc32/power4/fpu/mpa.c new file mode 100644 index 0000000000..4a232e27bf --- /dev/null +++ b/sysdeps/powerpc/powerpc32/power4/fpu/mpa.c @@ -0,0 +1,549 @@ + +/* + * IBM Accurate Mathematical Library + * written by International Business Machines Corp. + * Copyright (C) 2001, 2006 Free Software Foundation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation; either version 2.1 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +/************************************************************************/ +/* MODULE_NAME: mpa.c */ +/* */ +/* FUNCTIONS: */ +/* mcr */ +/* acr */ +/* cr */ +/* cpy */ +/* cpymn */ +/* norm */ +/* denorm */ +/* mp_dbl */ +/* dbl_mp */ +/* add_magnitudes */ +/* sub_magnitudes */ +/* add */ +/* sub */ +/* mul */ +/* inv */ +/* dvd */ +/* */ +/* Arithmetic functions for multiple precision numbers. */ +/* Relative errors are bounded */ +/************************************************************************/ + + +#include "endian.h" +#include "mpa.h" +#include "mpa2.h" +#include <sys/param.h> /* For MIN() */ +/* mcr() compares the sizes of the mantissas of two multiple precision */ +/* numbers. Mantissas are compared regardless of the signs of the */ +/* numbers, even if x->d[0] or y->d[0] are zero. Exponents are also */ +/* disregarded. */ +static int mcr(const mp_no *x, const mp_no *y, int p) { + long i; + long p2 = p; + for (i=1; i<=p2; i++) { + if (X[i] == Y[i]) continue; + else if (X[i] > Y[i]) return 1; + else return -1; } + return 0; +} + + + +/* acr() compares the absolute values of two multiple precision numbers */ +int __acr(const mp_no *x, const mp_no *y, int p) { + long i; + + if (X[0] == ZERO) { + if (Y[0] == ZERO) i= 0; + else i=-1; + } + else if (Y[0] == ZERO) i= 1; + else { + if (EX > EY) i= 1; + else if (EX < EY) i=-1; + else i= mcr(x,y,p); + } + + return i; +} + + +/* cr90 compares the values of two multiple precision numbers */ +int __cr(const mp_no *x, const mp_no *y, int p) { + int i; + + if (X[0] > Y[0]) i= 1; + else if (X[0] < Y[0]) i=-1; + else if (X[0] < ZERO ) i= __acr(y,x,p); + else i= __acr(x,y,p); + + return i; +} + + +/* Copy a multiple precision number. Set *y=*x. x=y is permissible. */ +void __cpy(const mp_no *x, mp_no *y, int p) { + long i; + + EY = EX; + for (i=0; i <= p; i++) Y[i] = X[i]; + + return; +} + + +/* Copy a multiple precision number x of precision m into a */ +/* multiple precision number y of precision n. In case n>m, */ +/* the digits of y beyond the m'th are set to zero. In case */ +/* n<m, the digits of x beyond the n'th are ignored. */ +/* x=y is permissible. */ + +void __cpymn(const mp_no *x, int m, mp_no *y, int n) { + + long i,k; + long n2 = n; + long m2 = m; + + EY = EX; k=MIN(m2,n2); + for (i=0; i <= k; i++) Y[i] = X[i]; + for ( ; i <= n2; i++) Y[i] = ZERO; + + return; +} + +/* Convert a multiple precision number *x into a double precision */ +/* number *y, normalized case (|x| >= 2**(-1022))) */ +static void norm(const mp_no *x, double *y, int p) +{ + #define R radixi.d + long i; +#if 0 + int k; +#endif + double a,c,u,v,z[5]; + if (p<5) { + if (p==1) c = X[1]; + else if (p==2) c = X[1] + R* X[2]; + else if (p==3) c = X[1] + R*(X[2] + R* X[3]); + else if (p==4) c =(X[1] + R* X[2]) + R*R*(X[3] + R*X[4]); + } + else { + for (a=ONE, z[1]=X[1]; z[1] < TWO23; ) + {a *= TWO; z[1] *= TWO; } + + for (i=2; i<5; i++) { + z[i] = X[i]*a; + u = (z[i] + CUTTER)-CUTTER; + if (u > z[i]) u -= RADIX; + z[i] -= u; + z[i-1] += u*RADIXI; + } + + u = (z[3] + TWO71) - TWO71; + if (u > z[3]) u -= TWO19; + v = z[3]-u; + + if (v == TWO18) { + if (z[4] == ZERO) { + for (i=5; i <= p; i++) { + if (X[i] == ZERO) continue; + else {z[3] += ONE; break; } + } + } + else z[3] += ONE; + } + + c = (z[1] + R *(z[2] + R * z[3]))/a; + } + + c *= X[0]; + + for (i=1; i<EX; i++) c *= RADIX; + for (i=1; i>EX; i--) c *= RADIXI; + + *y = c; + return; +#undef R +} + +/* Convert a multiple precision number *x into a double precision */ +/* number *y, denormalized case (|x| < 2**(-1022))) */ +static void denorm(const mp_no *x, double *y, int p) +{ + long i,k; + long p2 = p; + double c,u,z[5]; +#if 0 + double a,v; +#endif + +#define R radixi.d + if (EX<-44 || (EX==-44 && X[1]<TWO5)) + { *y=ZERO; return; } + + if (p2==1) { + if (EX==-42) {z[1]=X[1]+TWO10; z[2]=ZERO; z[3]=ZERO; k=3;} + else if (EX==-43) {z[1]= TWO10; z[2]=X[1]; z[3]=ZERO; k=2;} + else {z[1]= TWO10; z[2]=ZERO; z[3]=X[1]; k=1;} + } + else if (p2==2) { + if (EX==-42) {z[1]=X[1]+TWO10; z[2]=X[2]; z[3]=ZERO; k=3;} + else if (EX==-43) {z[1]= TWO10; z[2]=X[1]; z[3]=X[2]; k=2;} + else {z[1]= TWO10; z[2]=ZERO; z[3]=X[1]; k=1;} + } + else { + if (EX==-42) {z[1]=X[1]+TWO10; z[2]=X[2]; k=3;} + else if (EX==-43) {z[1]= TWO10; z[2]=X[1]; k=2;} + else {z[1]= TWO10; z[2]=ZERO; k=1;} + z[3] = X[k]; + } + + u = (z[3] + TWO57) - TWO57; + if (u > z[3]) u -= TWO5; + + if (u==z[3]) { + for (i=k+1; i <= p2; i++) { + if (X[i] == ZERO) continue; + else {z[3] += ONE; break; } + } + } + + c = X[0]*((z[1] + R*(z[2] + R*z[3])) - TWO10); + + *y = c*TWOM1032; + return; + +#undef R +} + +/* Convert a multiple precision number *x into a double precision number *y. */ +/* The result is correctly rounded to the nearest/even. *x is left unchanged */ + +void __mp_dbl(const mp_no *x, double *y, int p) { +#if 0 + int i,k; + double a,c,u,v,z[5]; +#endif + + if (X[0] == ZERO) {*y = ZERO; return; } + + if (EX> -42) norm(x,y,p); + else if (EX==-42 && X[1]>=TWO10) norm(x,y,p); + else denorm(x,y,p); +} + + +/* dbl_mp() converts a double precision number x into a multiple precision */ +/* number *y. If the precision p is too small the result is truncated. x is */ +/* left unchanged. */ + +void __dbl_mp(double x, mp_no *y, int p) { + + long i,n; + long p2 = p; + double u; + + /* Sign */ + if (x == ZERO) {Y[0] = ZERO; return; } + else if (x > ZERO) Y[0] = ONE; + else {Y[0] = MONE; x=-x; } + + /* Exponent */ + for (EY=ONE; x >= RADIX; EY += ONE) x *= RADIXI; + for ( ; x < ONE; EY -= ONE) x *= RADIX; + + /* Digits */ + n=MIN(p2,4); + for (i=1; i<=n; i++) { + u = (x + TWO52) - TWO52; + if (u>x) u -= ONE; + Y[i] = u; x -= u; x *= RADIX; } + for ( ; i<=p2; i++) Y[i] = ZERO; + return; +} + + +/* add_magnitudes() adds the magnitudes of *x & *y assuming that */ +/* abs(*x) >= abs(*y) > 0. */ +/* The sign of the sum *z is undefined. x&y may overlap but not x&z or y&z. */ +/* No guard digit is used. The result equals the exact sum, truncated. */ +/* *x & *y are left unchanged. */ + +static void add_magnitudes(const mp_no *x, const mp_no *y, mp_no *z, int p) { + + long i,j,k; + long p2 = p; + + EZ = EX; + + i=p2; j=p2+ EY - EX; k=p2+1; + + if (j<1) + {__cpy(x,z,p); return; } + else Z[k] = ZERO; + + for (; j>0; i--,j--) { + Z[k] += X[i] + Y[j]; + if (Z[k] >= RADIX) { + Z[k] -= RADIX; + Z[--k] = ONE; } + else + Z[--k] = ZERO; + } + + for (; i>0; i--) { + Z[k] += X[i]; + if (Z[k] >= RADIX) { + Z[k] -= RADIX; + Z[--k] = ONE; } + else + Z[--k] = ZERO; + } + + if (Z[1] == ZERO) { + for (i=1; i<=p2; i++) Z[i] = Z[i+1]; } + else EZ += ONE; +} + + +/* sub_magnitudes() subtracts the magnitudes of *x & *y assuming that */ +/* abs(*x) > abs(*y) > 0. */ +/* The sign of the difference *z is undefined. x&y may overlap but not x&z */ +/* or y&z. One guard digit is used. The error is less than one ulp. */ +/* *x & *y are left unchanged. */ + +static void sub_magnitudes(const mp_no *x, const mp_no *y, mp_no *z, int p) { + + long i,j,k; + long p2 = p; + + EZ = EX; + + if (EX == EY) { + i=j=k=p2; + Z[k] = Z[k+1] = ZERO; } + else { + j= EX - EY; + if (j > p2) {__cpy(x,z,p); return; } + else { + i=p2; j=p2+1-j; k=p2; + if (Y[j] > ZERO) { + Z[k+1] = RADIX - Y[j--]; + Z[k] = MONE; } + else { + Z[k+1] = ZERO; + Z[k] = ZERO; j--;} + } + } + + for (; j>0; i--,j--) { + Z[k] += (X[i] - Y[j]); + if (Z[k] < ZERO) { + Z[k] += RADIX; + Z[--k] = MONE; } + else + Z[--k] = ZERO; + } + + for (; i>0; i--) { + Z[k] += X[i]; + if (Z[k] < ZERO) { + Z[k] += RADIX; + Z[--k] = MONE; } + else + Z[--k] = ZERO; + } + + for (i=1; Z[i] == ZERO; i++) ; + EZ = EZ - i + 1; + for (k=1; i <= p2+1; ) + Z[k++] = Z[i++]; + for (; k <= p2; ) + Z[k++] = ZERO; + + return; +} + + +/* Add two multiple precision numbers. Set *z = *x + *y. x&y may overlap */ +/* but not x&z or y&z. One guard digit is used. The error is less than */ +/* one ulp. *x & *y are left unchanged. */ + +void __add(const mp_no *x, const mp_no *y, mp_no *z, int p) { + + int n; + + if (X[0] == ZERO) {__cpy(y,z,p); return; } + else if (Y[0] == ZERO) {__cpy(x,z,p); return; } + + if (X[0] == Y[0]) { + if (__acr(x,y,p) > 0) {add_magnitudes(x,y,z,p); Z[0] = X[0]; } + else {add_magnitudes(y,x,z,p); Z[0] = Y[0]; } + } + else { + if ((n=__acr(x,y,p)) == 1) {sub_magnitudes(x,y,z,p); Z[0] = X[0]; } + else if (n == -1) {sub_magnitudes(y,x,z,p); Z[0] = Y[0]; } + else Z[0] = ZERO; + } + return; +} + + +/* Subtract two multiple precision numbers. *z is set to *x - *y. x&y may */ +/* overlap but not x&z or y&z. One guard digit is used. The error is */ +/* less than one ulp. *x & *y are left unchanged. */ + +void __sub(const mp_no *x, const mp_no *y, mp_no *z, int p) { + + int n; + + if (X[0] == ZERO) {__cpy(y,z,p); Z[0] = -Z[0]; return; } + else if (Y[0] == ZERO) {__cpy(x,z,p); return; } + + if (X[0] != Y[0]) { + if (__acr(x,y,p) > 0) {add_magnitudes(x,y,z,p); Z[0] = X[0]; } + else {add_magnitudes(y,x,z,p); Z[0] = -Y[0]; } + } + else { + if ((n=__acr(x,y,p)) == 1) {sub_magnitudes(x,y,z,p); Z[0] = X[0]; } + else if (n == -1) {sub_magnitudes(y,x,z,p); Z[0] = -Y[0]; } + else Z[0] = ZERO; + } + return; +} + + +/* Multiply two multiple precision numbers. *z is set to *x * *y. x&y */ +/* may overlap but not x&z or y&z. In case p=1,2,3 the exact result is */ +/* truncated to p digits. In case p>3 the error is bounded by 1.001 ulp. */ +/* *x & *y are left unchanged. */ + +void __mul(const mp_no *x, const mp_no *y, mp_no *z, int p) { + + long i, i1, i2, j, k, k2; + long p2 = p; + double u, zk, zk2; + + /* Is z=0? */ + if (X[0]*Y[0]==ZERO) + { Z[0]=ZERO; return; } + + /* Multiply, add and carry */ + k2 = (p2<3) ? p2+p2 : p2+3; + zk = Z[k2]=ZERO; + for (k=k2; k>1; ) { + if (k > p2) {i1=k-p2; i2=p2+1; } + else {i1=1; i2=k; } +#if 1 + /* rearange this inner loop to allow the fmadd instructions to be + independent and execute in parallel on processors that have + dual symetrical FP pipelines. */ + if (i1 < (i2-1)) + { + /* make sure we have at least 2 iterations */ + if (((i2 - i1) & 1L) == 1L) + { + /* Handle the odd iterations case. */ + zk2 = x->d[i2-1]*y->d[i1]; + } + else + zk2 = zero.d; + /* Do two multiply/adds per loop iteration, using independent + accumulators; zk and zk2. */ + for (i=i1,j=i2-1; i<i2-1; i+=2,j-=2) + { + zk += x->d[i]*y->d[j]; + zk2 += x->d[i+1]*y->d[j-1]; + } + zk += zk2; /* final sum. */ + } + else + { + /* Special case when iterations is 1. */ + zk += x->d[i1]*y->d[i1]; + } +#else + /* The orginal code. */ + for (i=i1,j=i2-1; i<i2; i++,j--) zk += X[i]*Y[j]; +#endif + + u = (zk + CUTTER)-CUTTER; + if (u > zk) u -= RADIX; + Z[k] = zk - u; + zk = u*RADIXI; + --k; + } + Z[k] = zk; + + /* Is there a carry beyond the most significant digit? */ + if (Z[1] == ZERO) { + for (i=1; i<=p2; i++) Z[i]=Z[i+1]; + EZ = EX + EY - 1; } + else + EZ = EX + EY; + + Z[0] = X[0] * Y[0]; + return; +} + + +/* Invert a multiple precision number. Set *y = 1 / *x. */ +/* Relative error bound = 1.001*r**(1-p) for p=2, 1.063*r**(1-p) for p=3, */ +/* 2.001*r**(1-p) for p>3. */ +/* *x=0 is not permissible. *x is left unchanged. */ + +void __inv(const mp_no *x, mp_no *y, int p) { + long i; +#if 0 + int l; +#endif + double t; + mp_no z,w; + static const int np1[] = {0,0,0,0,1,2,2,2,2,3,3,3,3,3,3,3,3,3, + 4,4,4,4,4,4,4,4,4,4,4,4,4,4,4}; + const mp_no mptwo = {1,{1.0,2.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0, + 0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0, + 0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0, + 0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0}}; + + __cpy(x,&z,p); z.e=0; __mp_dbl(&z,&t,p); + t=ONE/t; __dbl_mp(t,y,p); EY -= EX; + + for (i=0; i<np1[p]; i++) { + __cpy(y,&w,p); + __mul(x,&w,y,p); + __sub(&mptwo,y,&z,p); + __mul(&w,&z,y,p); + } + return; +} + + +/* Divide one multiple precision number by another.Set *z = *x / *y. *x & *y */ +/* are left unchanged. x&y may overlap but not x&z or y&z. */ +/* Relative error bound = 2.001*r**(1-p) for p=2, 2.063*r**(1-p) for p=3 */ +/* and 3.001*r**(1-p) for p>3. *y=0 is not permissible. */ + +void __dvd(const mp_no *x, const mp_no *y, mp_no *z, int p) { + + mp_no w; + + if (X[0] == ZERO) Z[0] = ZERO; + else {__inv(y,&w,p); __mul(x,&w,z,p);} + return; +} diff --git a/sysdeps/powerpc/powerpc32/power4/fpu/s_llrint.S b/sysdeps/powerpc/powerpc32/power4/fpu/s_llrint.S new file mode 100644 index 0000000000..ad3cd2769b --- /dev/null +++ b/sysdeps/powerpc/powerpc32/power4/fpu/s_llrint.S @@ -0,0 +1,47 @@ +/* Round double to long int. PowerPC32 on PowerPC64 version. + Copyright (C) 2004, 2006 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA + 02110-1301 USA. */ + +#include <sysdep.h> +#include <math_ldbl_opt.h> + +/* long long int[r3, r4] __llrint (double x[fp1]) */ +ENTRY (__llrint) + CALL_MCOUNT + stwu r1,-16(r1) + cfi_adjust_cfa_offset (16) + fctid fp13,fp1 + stfd fp13,8(r1) + nop /* Insure the following load is in a different dispatch group */ + nop /* to avoid pipe stall on POWER4&5. */ + nop + lwz r3,8(r1) + lwz r4,12(r1) + addi r1,r1,16 + blr + END (__llrint) + +weak_alias (__llrint, llrint) + +#ifdef NO_LONG_DOUBLE +strong_alias (__llrint, __llrintl) +weak_alias (__llrint, llrintl) +#endif +#if LONG_DOUBLE_COMPAT(libm, GLIBC_2_1) +compat_symbol (libm, __llrint, llrintl, GLIBC_2_1) +#endif diff --git a/sysdeps/powerpc/powerpc32/power4/fpu/s_llrintf.S b/sysdeps/powerpc/powerpc32/power4/fpu/s_llrintf.S new file mode 100644 index 0000000000..21353ffb5b --- /dev/null +++ b/sysdeps/powerpc/powerpc32/power4/fpu/s_llrintf.S @@ -0,0 +1,39 @@ +/* Round float to long int. PowerPC32 on PowerPC64 version. + Copyright (C) 2004, 2006 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA + 02110-1301 USA. */ + +#include <sysdep.h> + +/* long long int[r3, r4] __llrintf (float x[fp1]) */ +ENTRY (__llrintf) + CALL_MCOUNT + stwu r1,-16(r1) + cfi_adjust_cfa_offset (16) + fctid fp13,fp1 + stfd fp13,8(r1) + nop /* Insure the following load is in a different dispatch group */ + nop /* to avoid pipe stall on POWER4&5. */ + nop + lwz r3,8(r1) + lwz r4,12(r1) + addi r1,r1,16 + blr + END (__llrintf) + +weak_alias (__llrintf, llrintf) + diff --git a/sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S b/sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S new file mode 100644 index 0000000000..952d2aa6a5 --- /dev/null +++ b/sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S @@ -0,0 +1,97 @@ +/* llround function. PowerPC32 on PowerPC64 version. + Copyright (C) 2004, 2006 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 1 Franklin Street, Fifth Floor, Boston MA + 02110-1301 USA. */ + +#include <sysdep.h> +#include <math_ldbl_opt.h> + + .section .rodata.cst8,"aM",@progbits,8 + .align 2 +.LC0: /* 0.0 */ + .long 0x00000000 +.LC1: /* 0.5 */ + .long 0x3f000000 + + .section ".text" + +/* long [r3] lround (float x [fp1]) + IEEE 1003.1 lround function. IEEE specifies "round to the nearest + integer value, rounding halfway cases away from zero, regardless of + the current rounding mode." However PowerPC Architecture defines + "round to Nearest" as "Choose the best approximation. In case of a + tie, choose the one that is even (least significant bit o).". + So we can't use the PowerPC "round to Nearest" mode. Instead we set + "round toward Zero" mode and round by adding +-0.5 before rounding + to the integer value. */ + +ENTRY (__llround) + stwu r1,-16(r1) + cfi_adjust_cfa_offset (16) +#ifdef SHARED + mflr r11 + cfi_register(lr,r11) +# ifdef HAVE_ASM_PPC_REL16 + bcl 20,31,1f +1: mflr r9 + addis r9,r9,.LC0-1b@ha + addi r9,r9,.LC0-1b@l +# else + bl _GLOBAL_OFFSET_TABLE_@local-4 + mflr r10 + lwz r9,.LC0@got(10) +# endif + mtlr r11 + cfi_same_value (lr) + lfs fp12,0(r9) + lfs fp10,.LC1-.LC0(r9) +#else + lis r9,.LC0@ha + lis r10,.LC1@ha + lfs fp12,.LC0@l(r9) + lfs fp10,.LC1@l(r10) +#endif + fcmpu cr6,fp1,fp12 /* if (x > 0.0) */ + ble- cr6,.L4 + fadd fp1,fp1,fp10 /* x+= 0.5; */ +.L9: + fctidz fp2,fp1 /* Convert To Integer DW round toward 0. */ + stfd fp2,8(r1) + nop /* Ensure the following load is in a different dispatch */ + nop /* group to avoid pipe stall on POWER4&5. */ + nop + lwz r4,12(r1) + lwz r3,8(r1) + addi r1,r1,16 + blr +.L4: + fsub fp1,fp1,fp10 /* x-= 0.5; */ + b .L9 + END (__llround) + +weak_alias (__llround, llround) + +strong_alias (__llround, __llroundf) +weak_alias (__llround, llroundf) + +#ifdef NO_LONG_DOUBLE +weak_alias (__llround, llroundl) +strong_alias (__llround, __llroundl) +#endif +#if LONG_DOUBLE_COMPAT(libm, GLIBC_2_1) +compat_symbol (libm, __llround, llroundl, GLIBC_2_1) +#endif diff --git a/sysdeps/powerpc/powerpc32/power4/fpu/s_llroundf.S b/sysdeps/powerpc/powerpc32/power4/fpu/s_llroundf.S new file mode 100644 index 0000000000..72d6181541 --- /dev/null +++ b/sysdeps/powerpc/powerpc32/power4/fpu/s_llroundf.S @@ -0,0 +1 @@ +/* __llroundf is in s_llround.S */ diff --git a/sysdeps/powerpc/powerpc32/power4/fpu/slowexp.c b/sysdeps/powerpc/powerpc32/power4/fpu/slowexp.c new file mode 100644 index 0000000000..b22b0dfeab --- /dev/null +++ b/sysdeps/powerpc/powerpc32/power4/fpu/slowexp.c @@ -0,0 +1,66 @@ +/* + * IBM Accurate Mathematical Library + * written by International Business Machines Corp. + * Copyright (C) 2001, 2007 Free Software Foundation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation; either version 2.1 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +/**************************************************************************/ +/* MODULE_NAME:slowexp.c */ +/* */ +/* FUNCTION:slowexp */ +/* */ +/* FILES NEEDED:mpa.h */ +/* mpa.c mpexp.c */ +/* */ +/*Converting from double precision to Multi-precision and calculating */ +/* e^x */ +/**************************************************************************/ +#include "math_private.h" + +#ifdef NO_LONG_DOUBLE +#include "mpa.h" +void __mpexp(mp_no *x, mp_no *y, int p); +#endif + +/*Converting from double precision to Multi-precision and calculating e^x */ +double __slowexp(double x) { +#ifdef NO_LONG_DOUBLE + double w,z,res,eps=3.0e-26; + int p; + mp_no mpx, mpy, mpz,mpw,mpeps,mpcor; + + p=6; + __dbl_mp(x,&mpx,p); /* Convert a double precision number x */ + /* into a multiple precision number mpx with prec. p. */ + __mpexp(&mpx, &mpy, p); /* Multi-Precision exponential function */ + __dbl_mp(eps,&mpeps,p); + __mul(&mpeps,&mpy,&mpcor,p); + __add(&mpy,&mpcor,&mpw,p); + __sub(&mpy,&mpcor,&mpz,p); + __mp_dbl(&mpw, &w, p); + __mp_dbl(&mpz, &z, p); + if (w == z) return w; + else { /* if calculating is not exactly */ + p = 32; + __dbl_mp(x,&mpx,p); + __mpexp(&mpx, &mpy, p); + __mp_dbl(&mpy, &res, p); + return res; + } +#else + return (double) __ieee754_expl((long double)x); +#endif +} diff --git a/sysdeps/powerpc/powerpc32/power4/fpu/slowpow.c b/sysdeps/powerpc/powerpc32/power4/fpu/slowpow.c new file mode 100644 index 0000000000..ad147a89a6 --- /dev/null +++ b/sysdeps/powerpc/powerpc32/power4/fpu/slowpow.c @@ -0,0 +1,94 @@ +/* + * IBM Accurate Mathematical Library + * written by International Business Machines Corp. + * Copyright (C) 2001, 2006 Free Software Foundation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation; either version 2.1 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +/*************************************************************************/ +/* MODULE_NAME:slowpow.c */ +/* */ +/* FUNCTION:slowpow */ +/* */ +/*FILES NEEDED:mpa.h */ +/* mpa.c mpexp.c mplog.c halfulp.c */ +/* */ +/* Given two IEEE double machine numbers y,x , routine computes the */ +/* correctly rounded (to nearest) value of x^y. Result calculated by */ +/* multiplication (in halfulp.c) or if result isn't accurate enough */ +/* then routine converts x and y into multi-precision doubles and */ +/* recompute. */ +/*************************************************************************/ + +#include "mpa.h" +#include "math_private.h" + +void __mpexp (mp_no * x, mp_no * y, int p); +void __mplog (mp_no * x, mp_no * y, int p); +double ulog (double); +double __halfulp (double x, double y); + +double +__slowpow (double x, double y, double z) +{ + double res, res1; + long double ldw, ldz, ldpp; + static const long double ldeps = 0x4.0p-96; + + res = __halfulp (x, y); /* halfulp() returns -10 or x^y */ + if (res >= 0) + return res; /* if result was really computed by halfulp */ + /* else, if result was not really computed by halfulp */ + + /* Compute pow as long double, 106 bits */ + ldz = __ieee754_logl ((long double) x); + ldw = (long double) y *ldz; + ldpp = __ieee754_expl (ldw); + res = (double) (ldpp + ldeps); + res1 = (double) (ldpp - ldeps); + + if (res != res1) /* if result still not accurate enough */ + { /* use mpa for higher persision. */ + mp_no mpx, mpy, mpz, mpw, mpp, mpr, mpr1; + static const mp_no eps = { -3, {1.0, 4.0} }; + int p; + + p = 10; /* p=precision 240 bits */ + __dbl_mp (x, &mpx, p); + __dbl_mp (y, &mpy, p); + __dbl_mp (z, &mpz, p); + __mplog (&mpx, &mpz, p); /* log(x) = z */ + __mul (&mpy, &mpz, &mpw, p); /* y * z =w */ + __mpexp (&mpw, &mpp, p); /* e^w =pp */ + __add (&mpp, &eps, &mpr, p); /* pp+eps =r */ + __mp_dbl (&mpr, &res, p); + __sub (&mpp, &eps, &mpr1, p); /* pp -eps =r1 */ + __mp_dbl (&mpr1, &res1, p); /* converting into double precision */ + if (res == res1) + return res; + + /* if we get here result wasn't calculated exactly, continue for + more exact calculation using 768 bits. */ + p = 32; + __dbl_mp (x, &mpx, p); + __dbl_mp (y, &mpy, p); + __dbl_mp (z, &mpz, p); + __mplog (&mpx, &mpz, p); /* log(c)=z */ + __mul (&mpy, &mpz, &mpw, p); /* y*z =w */ + __mpexp (&mpw, &mpp, p); /* e^w=pp */ + __mp_dbl (&mpp, &res, p); /* converting into double precision */ + } + return res; +} diff --git a/sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt.c b/sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt.c new file mode 100644 index 0000000000..f59c193934 --- /dev/null +++ b/sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt.c @@ -0,0 +1,62 @@ +/* Double-precision floating point square root wrapper. + Copyright (C) 2004, 2007 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#include <math_ldbl_opt.h> +#include "math.h" +#include "math_private.h" +#include <fenv_libc.h> + +#ifdef __STDC__ +double +__sqrt (double x) /* wrapper sqrt */ +#else +double +__sqrt (x) /* wrapper sqrt */ + double x; +#endif +{ + double z; +/* Power4 (ISA V2.0) and above implement sqrt in hardware. */ + __asm __volatile ( + " fsqrt %0,%1\n" + : "=f" (z) + : "f" (x)); +#ifdef _IEEE_LIBM + return z; +#else + if (__builtin_expect (_LIB_VERSION == _IEEE_, 0)) + return z; + + if (__builtin_expect (x != x, 0)) + return z; + + if (__builtin_expect (x < 0.0, 0)) + return __kernel_standard (x, x, 26); /* sqrt(negative) */ + else + return z; +#endif +} + +weak_alias (__sqrt, sqrt) +#ifdef NO_LONG_DOUBLE + strong_alias (__sqrt, __sqrtl) weak_alias (__sqrt, sqrtl) +#endif +#if LONG_DOUBLE_COMPAT(libm, GLIBC_2_0) +compat_symbol (libm, __sqrt, sqrtl, GLIBC_2_0); +#endif diff --git a/sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf.c b/sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf.c new file mode 100644 index 0000000000..4784869f07 --- /dev/null +++ b/sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf.c @@ -0,0 +1,60 @@ +/* Single-precision floating point square root wrapper. + Copyright (C) 2004, 2007 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#include "math.h" +#include "math_private.h" +#include <fenv_libc.h> + +#include <sysdep.h> +#include <ldsodefs.h> + +#ifdef __STDC__ +float +__sqrtf (float x) /* wrapper sqrtf */ +#else +float +__sqrtf (x) /* wrapper sqrtf */ + float x; +#endif +{ +#ifdef _IEEE_LIBM + return __ieee754_sqrtf (x); +#else + float z; +/* Power4 (ISA V2.0) and above implement sqrtf in hardware. */ + __asm __volatile ( + " fsqrts %0,%1\n" + : "=f" (z) + : "f" (x)); + + if (__builtin_expect (_LIB_VERSION == _IEEE_, 0)) + return z; + + if (__builtin_expect (x != x, 0)) + return z; + + if (__builtin_expect (x < 0.0, 0)) + /* sqrtf(negative) */ + return (float) __kernel_standard ((double) x, (double) x, 126); + else + return z; +#endif +} + +weak_alias (__sqrtf, sqrtf) diff --git a/sysdeps/powerpc/powerpc32/power4/memcmp.S b/sysdeps/powerpc/powerpc32/power4/memcmp.S new file mode 100644 index 0000000000..75b328403a --- /dev/null +++ b/sysdeps/powerpc/powerpc32/power4/memcmp.S @@ -0,0 +1,986 @@ +/* Optimized strcmp implementation for PowerPC64. + Copyright (C) 2003, 2006 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA + 02110-1301 USA. */ + +#include <sysdep.h> +#include <bp-sym.h> +#include <bp-asm.h> + +/* int [r3] memcmp (const char *s1 [r3], const char *s2 [r4], size_t size [r5]) */ + + .machine power4 +EALIGN (BP_SYM(memcmp), 4, 0) + CALL_MCOUNT + +#define rTMP r0 +#define rRTN r3 +#define rSTR1 r3 /* first string arg */ +#define rSTR2 r4 /* second string arg */ +#define rN r5 /* max string length */ +#define rWORD1 r6 /* current word in s1 */ +#define rWORD2 r7 /* current word in s2 */ +#define rWORD3 r8 /* next word in s1 */ +#define rWORD4 r9 /* next word in s2 */ +#define rWORD5 r10 /* next word in s1 */ +#define rWORD6 r11 /* next word in s2 */ +#define rBITDIF r12 /* bits that differ in s1 & s2 words */ +#define rWORD7 r30 /* next word in s1 */ +#define rWORD8 r31 /* next word in s2 */ + + xor rTMP, rSTR2, rSTR1 + cmplwi cr6, rN, 0 + cmplwi cr1, rN, 12 + clrlwi. rTMP, rTMP, 30 + clrlwi rBITDIF, rSTR1, 30 + cmplwi cr5, rBITDIF, 0 + beq- cr6, L(zeroLength) + dcbt 0,rSTR1 + dcbt 0,rSTR2 +/* If less than 8 bytes or not aligned, use the unaligned + byte loop. */ + blt cr1, L(bytealigned) + stwu 1,-64(1) + cfi_adjust_cfa_offset(64) + stw r31,48(1) + cfi_offset(31,(48-64)) + stw r30,44(1) + cfi_offset(30,(44-64)) + bne L(unaligned) +/* At this point we know both strings have the same alignment and the + compare length is at least 8 bytes. rBITDIF contains the low order + 2 bits of rSTR1 and cr5 contains the result of the logical compare + of rBITDIF to 0. If rBITDIF == 0 then we are already word + aligned and can perform the word aligned loop. + + Otherwise we know the two strings have the same alignment (but not + yet word aligned). So we force the string addresses to the next lower + word boundary and special case this first word using shift left to + eliminate bits preceeding the first byte. Since we want to join the + normal (word aligned) compare loop, starting at the second word, + we need to adjust the length (rN) and special case the loop + versioning for the first word. This insures that the loop count is + correct and the first word (shifted) is in the expected register pair. */ + .align 4 +L(samealignment): + clrrwi rSTR1, rSTR1, 2 + clrrwi rSTR2, rSTR2, 2 + beq cr5, L(Waligned) + add rN, rN, rBITDIF + slwi r11, rBITDIF, 3 + srwi rTMP, rN, 4 /* Divide by 16 */ + andi. rBITDIF, rN, 12 /* Get the word remainder */ + lwz rWORD1, 0(rSTR1) + lwz rWORD2, 0(rSTR2) + cmplwi cr1, rBITDIF, 8 + cmplwi cr7, rN, 16 + clrlwi rN, rN, 30 + beq L(dPs4) + mtctr rTMP /* Power4 wants mtctr 1st in dispatch group */ + bgt cr1, L(dPs3) + beq cr1, L(dPs2) + +/* Remainder is 4 */ + .align 3 +L(dsP1): + slw rWORD5, rWORD1, r11 + slw rWORD6, rWORD2, r11 + cmplw cr5, rWORD5, rWORD6 + blt cr7, L(dP1x) +/* Do something useful in this cycle since we have to branch anyway. */ + lwz rWORD1, 4(rSTR1) + lwz rWORD2, 4(rSTR2) + cmplw cr0, rWORD1, rWORD2 + b L(dP1e) +/* Remainder is 8 */ + .align 4 +L(dPs2): + slw rWORD5, rWORD1, r11 + slw rWORD6, rWORD2, r11 + cmplw cr6, rWORD5, rWORD6 + blt cr7, L(dP2x) +/* Do something useful in this cycle since we have to branch anyway. */ + lwz rWORD7, 4(rSTR1) + lwz rWORD8, 4(rSTR2) + cmplw cr5, rWORD7, rWORD8 + b L(dP2e) +/* Remainder is 12 */ + .align 4 +L(dPs3): + slw rWORD3, rWORD1, r11 + slw rWORD4, rWORD2, r11 + cmplw cr1, rWORD3, rWORD4 + b L(dP3e) +/* Count is a multiple of 16, remainder is 0 */ + .align 4 +L(dPs4): + mtctr rTMP /* Power4 wants mtctr 1st in dispatch group */ + slw rWORD1, rWORD1, r11 + slw rWORD2, rWORD2, r11 + cmplw cr0, rWORD1, rWORD2 + b L(dP4e) + +/* At this point we know both strings are word aligned and the + compare length is at least 8 bytes. */ + .align 4 +L(Waligned): + andi. rBITDIF, rN, 12 /* Get the word remainder */ + srwi rTMP, rN, 4 /* Divide by 16 */ + cmplwi cr1, rBITDIF, 8 + cmplwi cr7, rN, 16 + clrlwi rN, rN, 30 + beq L(dP4) + bgt cr1, L(dP3) + beq cr1, L(dP2) + +/* Remainder is 4 */ + .align 4 +L(dP1): + mtctr rTMP /* Power4 wants mtctr 1st in dispatch group */ +/* Normally we'd use rWORD7/rWORD8 here, but since we might exit early + (8-15 byte compare), we want to use only volatile registers. This + means we can avoid restoring non-volatile registers since we did not + change any on the early exit path. The key here is the non-early + exit path only cares about the condition code (cr5), not about which + register pair was used. */ + lwz rWORD5, 0(rSTR1) + lwz rWORD6, 0(rSTR2) + cmplw cr5, rWORD5, rWORD6 + blt cr7, L(dP1x) + lwz rWORD1, 4(rSTR1) + lwz rWORD2, 4(rSTR2) + cmplw cr0, rWORD1, rWORD2 +L(dP1e): + lwz rWORD3, 8(rSTR1) + lwz rWORD4, 8(rSTR2) + cmplw cr1, rWORD3, rWORD4 + lwz rWORD5, 12(rSTR1) + lwz rWORD6, 12(rSTR2) + cmplw cr6, rWORD5, rWORD6 + bne cr5, L(dLcr5) + bne cr0, L(dLcr0) + + lwzu rWORD7, 16(rSTR1) + lwzu rWORD8, 16(rSTR2) + bne cr1, L(dLcr1) + cmplw cr5, rWORD7, rWORD8 + bdnz L(dLoop) + bne cr6, L(dLcr6) + lwz r30,44(1) + lwz r31,48(1) + .align 3 +L(dP1x): + slwi. r12, rN, 3 + bne cr5, L(dLcr5) + subfic rN, r12, 32 /* Shift count is 32 - (rN * 8). */ + lwz 1,0(1) + bne L(d00) + li rRTN, 0 + blr + +/* Remainder is 8 */ + .align 4 +L(dP2): + mtctr rTMP /* Power4 wants mtctr 1st in dispatch group */ + lwz rWORD5, 0(rSTR1) + lwz rWORD6, 0(rSTR2) + cmplw cr6, rWORD5, rWORD6 + blt cr7, L(dP2x) + lwz rWORD7, 4(rSTR1) + lwz rWORD8, 4(rSTR2) + cmplw cr5, rWORD7, rWORD8 +L(dP2e): + lwz rWORD1, 8(rSTR1) + lwz rWORD2, 8(rSTR2) + cmplw cr0, rWORD1, rWORD2 + lwz rWORD3, 12(rSTR1) + lwz rWORD4, 12(rSTR2) + cmplw cr1, rWORD3, rWORD4 + addi rSTR1, rSTR1, 4 + addi rSTR2, rSTR2, 4 + bne cr6, L(dLcr6) + bne cr5, L(dLcr5) + b L(dLoop2) +/* Again we are on a early exit path (16-23 byte compare), we want to + only use volatile registers and avoid restoring non-volatile + registers. */ + .align 4 +L(dP2x): + lwz rWORD3, 4(rSTR1) + lwz rWORD4, 4(rSTR2) + cmplw cr5, rWORD3, rWORD4 + slwi. r12, rN, 3 + bne cr6, L(dLcr6) + addi rSTR1, rSTR1, 4 + addi rSTR2, rSTR2, 4 + bne cr5, L(dLcr5) + subfic rN, r12, 32 /* Shift count is 32 - (rN * 8). */ + lwz 1,0(1) + bne L(d00) + li rRTN, 0 + blr + +/* Remainder is 12 */ + .align 4 +L(dP3): + mtctr rTMP /* Power4 wants mtctr 1st in dispatch group */ + lwz rWORD3, 0(rSTR1) + lwz rWORD4, 0(rSTR2) + cmplw cr1, rWORD3, rWORD4 +L(dP3e): + lwz rWORD5, 4(rSTR1) + lwz rWORD6, 4(rSTR2) + cmplw cr6, rWORD5, rWORD6 + blt cr7, L(dP3x) + lwz rWORD7, 8(rSTR1) + lwz rWORD8, 8(rSTR2) + cmplw cr5, rWORD7, rWORD8 + lwz rWORD1, 12(rSTR1) + lwz rWORD2, 12(rSTR2) + cmplw cr0, rWORD1, rWORD2 + addi rSTR1, rSTR1, 8 + addi rSTR2, rSTR2, 8 + bne cr1, L(dLcr1) + bne cr6, L(dLcr6) + b L(dLoop1) +/* Again we are on a early exit path (24-31 byte compare), we want to + only use volatile registers and avoid restoring non-volatile + registers. */ + .align 4 +L(dP3x): + lwz rWORD1, 8(rSTR1) + lwz rWORD2, 8(rSTR2) + cmplw cr5, rWORD1, rWORD2 + slwi. r12, rN, 3 + bne cr1, L(dLcr1) + addi rSTR1, rSTR1, 8 + addi rSTR2, rSTR2, 8 + bne cr6, L(dLcr6) + subfic rN, r12, 32 /* Shift count is 32 - (rN * 8). */ + bne cr5, L(dLcr5) + lwz 1,0(1) + bne L(d00) + li rRTN, 0 + blr + +/* Count is a multiple of 16, remainder is 0 */ + .align 4 +L(dP4): + mtctr rTMP /* Power4 wants mtctr 1st in dispatch group */ + lwz rWORD1, 0(rSTR1) + lwz rWORD2, 0(rSTR2) + cmplw cr0, rWORD1, rWORD2 +L(dP4e): + lwz rWORD3, 4(rSTR1) + lwz rWORD4, 4(rSTR2) + cmplw cr1, rWORD3, rWORD4 + lwz rWORD5, 8(rSTR1) + lwz rWORD6, 8(rSTR2) + cmplw cr6, rWORD5, rWORD6 + lwzu rWORD7, 12(rSTR1) + lwzu rWORD8, 12(rSTR2) + cmplw cr5, rWORD7, rWORD8 + bne cr0, L(dLcr0) + bne cr1, L(dLcr1) + bdz- L(d24) /* Adjust CTR as we start with +4 */ +/* This is the primary loop */ + .align 4 +L(dLoop): + lwz rWORD1, 4(rSTR1) + lwz rWORD2, 4(rSTR2) + cmplw cr1, rWORD3, rWORD4 + bne cr6, L(dLcr6) +L(dLoop1): + lwz rWORD3, 8(rSTR1) + lwz rWORD4, 8(rSTR2) + cmplw cr6, rWORD5, rWORD6 + bne cr5, L(dLcr5) +L(dLoop2): + lwz rWORD5, 12(rSTR1) + lwz rWORD6, 12(rSTR2) + cmplw cr5, rWORD7, rWORD8 + bne cr0, L(dLcr0) +L(dLoop3): + lwzu rWORD7, 16(rSTR1) + lwzu rWORD8, 16(rSTR2) + bne- cr1, L(dLcr1) + cmplw cr0, rWORD1, rWORD2 + bdnz+ L(dLoop) + +L(dL4): + cmplw cr1, rWORD3, rWORD4 + bne cr6, L(dLcr6) + cmplw cr6, rWORD5, rWORD6 + bne cr5, L(dLcr5) + cmplw cr5, rWORD7, rWORD8 +L(d44): + bne cr0, L(dLcr0) +L(d34): + bne cr1, L(dLcr1) +L(d24): + bne cr6, L(dLcr6) +L(d14): + slwi. r12, rN, 3 + bne cr5, L(dLcr5) +L(d04): + lwz r30,44(1) + lwz r31,48(1) + lwz 1,0(1) + subfic rN, r12, 32 /* Shift count is 32 - (rN * 8). */ + beq L(zeroLength) +/* At this point we have a remainder of 1 to 3 bytes to compare. Since + we are aligned it is safe to load the whole word, and use + shift right to eliminate bits beyond the compare length. */ +L(d00): + lwz rWORD1, 4(rSTR1) + lwz rWORD2, 4(rSTR2) + srw rWORD1, rWORD1, rN + srw rWORD2, rWORD2, rN + cmplw rWORD1,rWORD2 + li rRTN,0 + beqlr + li rRTN,1 + bgtlr + li rRTN,-1 + blr + + .align 4 +L(dLcr0): + lwz r30,44(1) + lwz r31,48(1) + li rRTN, 1 + lwz 1,0(1) + bgtlr cr0 + li rRTN, -1 + blr + .align 4 +L(dLcr1): + lwz r30,44(1) + lwz r31,48(1) + li rRTN, 1 + lwz 1,0(1) + bgtlr cr1 + li rRTN, -1 + blr + .align 4 +L(dLcr6): + lwz r30,44(1) + lwz r31,48(1) + li rRTN, 1 + lwz 1,0(1) + bgtlr cr6 + li rRTN, -1 + blr + .align 4 +L(dLcr5): + lwz r30,44(1) + lwz r31,48(1) +L(dLcr5x): + li rRTN, 1 + lwz 1,0(1) + bgtlr cr5 + li rRTN, -1 + blr + + .align 4 +L(bytealigned): + cfi_adjust_cfa_offset(-64) + mtctr rN /* Power4 wants mtctr 1st in dispatch group */ + +/* We need to prime this loop. This loop is swing modulo scheduled + to avoid pipe delays. The dependent instruction latencies (load to + compare to conditional branch) is 2 to 3 cycles. In this loop each + dispatch group ends in a branch and takes 1 cycle. Effectively + the first iteration of the loop only serves to load operands and + branches based on compares are delayed until the next loop. + + So we must precondition some registers and condition codes so that + we don't exit the loop early on the first iteration. */ + + lbz rWORD1, 0(rSTR1) + lbz rWORD2, 0(rSTR2) + bdz- L(b11) + cmplw cr0, rWORD1, rWORD2 + lbz rWORD3, 1(rSTR1) + lbz rWORD4, 1(rSTR2) + bdz- L(b12) + cmplw cr1, rWORD3, rWORD4 + lbzu rWORD5, 2(rSTR1) + lbzu rWORD6, 2(rSTR2) + bdz- L(b13) + .align 4 +L(bLoop): + lbzu rWORD1, 1(rSTR1) + lbzu rWORD2, 1(rSTR2) + bne- cr0, L(bLcr0) + + cmplw cr6, rWORD5, rWORD6 + bdz- L(b3i) + + lbzu rWORD3, 1(rSTR1) + lbzu rWORD4, 1(rSTR2) + bne- cr1, L(bLcr1) + + cmplw cr0, rWORD1, rWORD2 + bdz- L(b2i) + + lbzu rWORD5, 1(rSTR1) + lbzu rWORD6, 1(rSTR2) + bne- cr6, L(bLcr6) + + cmplw cr1, rWORD3, rWORD4 + bdnz+ L(bLoop) + +/* We speculatively loading bytes before we have tested the previous + bytes. But we must avoid overrunning the length (in the ctr) to + prevent these speculative loads from causing a segfault. In this + case the loop will exit early (before the all pending bytes are + tested. In this case we must complete the pending operations + before returning. */ +L(b1i): + bne- cr0, L(bLcr0) + bne- cr1, L(bLcr1) + b L(bx56) + .align 4 +L(b2i): + bne- cr6, L(bLcr6) + bne- cr0, L(bLcr0) + b L(bx34) + .align 4 +L(b3i): + bne- cr1, L(bLcr1) + bne- cr6, L(bLcr6) + b L(bx12) + .align 4 +L(bLcr0): + li rRTN, 1 + bgtlr cr0 + li rRTN, -1 + blr +L(bLcr1): + li rRTN, 1 + bgtlr cr1 + li rRTN, -1 + blr +L(bLcr6): + li rRTN, 1 + bgtlr cr6 + li rRTN, -1 + blr + +L(b13): + bne- cr0, L(bx12) + bne- cr1, L(bx34) +L(bx56): + sub rRTN, rWORD5, rWORD6 + blr + nop +L(b12): + bne- cr0, L(bx12) +L(bx34): + sub rRTN, rWORD3, rWORD4 + blr + +L(b11): +L(bx12): + sub rRTN, rWORD1, rWORD2 + blr + + .align 4 +L(zeroLengthReturn): + +L(zeroLength): + li rRTN, 0 + blr + + cfi_adjust_cfa_offset(64) + .align 4 +/* At this point we know the strings have different alignment and the + compare length is at least 8 bytes. rBITDIF contains the low order + 2 bits of rSTR1 and cr5 contains the result of the logical compare + of rBITDIF to 0. If rBITDIF == 0 then rStr1 is word aligned and can + perform the Wunaligned loop. + + Otherwise we know that rSTR1 is not aready word aligned yet. + So we can force the string addresses to the next lower word + boundary and special case this first word using shift left to + eliminate bits preceeding the first byte. Since we want to join the + normal (Wualigned) compare loop, starting at the second word, + we need to adjust the length (rN) and special case the loop + versioning for the first W. This insures that the loop count is + correct and the first W (shifted) is in the expected resister pair. */ +#define rSHL r29 /* Unaligned shift left count. */ +#define rSHR r28 /* Unaligned shift right count. */ +#define rB r27 /* Left rotation temp for rWORD2. */ +#define rD r26 /* Left rotation temp for rWORD4. */ +#define rF r25 /* Left rotation temp for rWORD6. */ +#define rH r24 /* Left rotation temp for rWORD8. */ +#define rA r0 /* Right rotation temp for rWORD2. */ +#define rC r12 /* Right rotation temp for rWORD4. */ +#define rE r0 /* Right rotation temp for rWORD6. */ +#define rG r12 /* Right rotation temp for rWORD8. */ +L(unaligned): + stw r29,40(r1) + cfi_offset(r29,(40-64)) + clrlwi rSHL, rSTR2, 30 + stw r28,36(r1) + cfi_offset(r28,(36-64)) + beq cr5, L(Wunaligned) + stw r27,32(r1) + cfi_offset(r27,(32-64)) +/* Adjust the logical start of rSTR2 to compensate for the extra bits + in the 1st rSTR1 W. */ + sub r27, rSTR2, rBITDIF +/* But do not attempt to address the W before that W that contains + the actual start of rSTR2. */ + clrrwi rSTR2, rSTR2, 2 + stw r26,28(r1) + cfi_offset(r26,(28-64)) +/* Compute the left/right shift counts for the unalign rSTR2, + compensating for the logical (W aligned) start of rSTR1. */ + clrlwi rSHL, r27, 30 + clrrwi rSTR1, rSTR1, 2 + stw r25,24(r1) + cfi_offset(r25,(24-64)) + slwi rSHL, rSHL, 3 + cmplw cr5, r27, rSTR2 + add rN, rN, rBITDIF + slwi r11, rBITDIF, 3 + stw r24,20(r1) + cfi_offset(r24,(20-64)) + subfic rSHR, rSHL, 32 + srwi rTMP, rN, 4 /* Divide by 16 */ + andi. rBITDIF, rN, 12 /* Get the W remainder */ +/* We normally need to load 2 Ws to start the unaligned rSTR2, but in + this special case those bits may be discarded anyway. Also we + must avoid loading a W where none of the bits are part of rSTR2 as + this may cross a page boundary and cause a page fault. */ + li rWORD8, 0 + blt cr5, L(dus0) + lwz rWORD8, 0(rSTR2) + la rSTR2, 4(rSTR2) + slw rWORD8, rWORD8, rSHL + +L(dus0): + lwz rWORD1, 0(rSTR1) + lwz rWORD2, 0(rSTR2) + cmplwi cr1, rBITDIF, 8 + cmplwi cr7, rN, 16 + srw rG, rWORD2, rSHR + clrlwi rN, rN, 30 + beq L(duPs4) + mtctr rTMP /* Power4 wants mtctr 1st in dispatch group */ + or rWORD8, rG, rWORD8 + bgt cr1, L(duPs3) + beq cr1, L(duPs2) + +/* Remainder is 4 */ + .align 4 +L(dusP1): + slw rB, rWORD2, rSHL + slw rWORD7, rWORD1, r11 + slw rWORD8, rWORD8, r11 + bge cr7, L(duP1e) +/* At this point we exit early with the first word compare + complete and remainder of 0 to 3 bytes. See L(du14) for details on + how we handle the remaining bytes. */ + cmplw cr5, rWORD7, rWORD8 + slwi. rN, rN, 3 + bne cr5, L(duLcr5) + cmplw cr7, rN, rSHR + beq L(duZeroReturn) + li rA, 0 + ble cr7, L(dutrim) + lwz rWORD2, 4(rSTR2) + srw rA, rWORD2, rSHR + b L(dutrim) +/* Remainder is 8 */ + .align 4 +L(duPs2): + slw rH, rWORD2, rSHL + slw rWORD5, rWORD1, r11 + slw rWORD6, rWORD8, r11 + b L(duP2e) +/* Remainder is 12 */ + .align 4 +L(duPs3): + slw rF, rWORD2, rSHL + slw rWORD3, rWORD1, r11 + slw rWORD4, rWORD8, r11 + b L(duP3e) +/* Count is a multiple of 16, remainder is 0 */ + .align 4 +L(duPs4): + mtctr rTMP /* Power4 wants mtctr 1st in dispatch group */ + or rWORD8, rG, rWORD8 + slw rD, rWORD2, rSHL + slw rWORD1, rWORD1, r11 + slw rWORD2, rWORD8, r11 + b L(duP4e) + +/* At this point we know rSTR1 is word aligned and the + compare length is at least 8 bytes. */ + .align 4 +L(Wunaligned): + stw r27,32(r1) + cfi_offset(r27,(32-64)) + clrrwi rSTR2, rSTR2, 2 + stw r26,28(r1) + cfi_offset(r26,(28-64)) + srwi rTMP, rN, 4 /* Divide by 16 */ + stw r25,24(r1) + cfi_offset(r25,(24-64)) + andi. rBITDIF, rN, 12 /* Get the W remainder */ + stw r24,20(r1) + cfi_offset(r24,(24-64)) + slwi rSHL, rSHL, 3 + lwz rWORD6, 0(rSTR2) + lwzu rWORD8, 4(rSTR2) + cmplwi cr1, rBITDIF, 8 + cmplwi cr7, rN, 16 + clrlwi rN, rN, 30 + subfic rSHR, rSHL, 32 + slw rH, rWORD6, rSHL + beq L(duP4) + mtctr rTMP /* Power4 wants mtctr 1st in dispatch group */ + bgt cr1, L(duP3) + beq cr1, L(duP2) + +/* Remainder is 4 */ + .align 4 +L(duP1): + srw rG, rWORD8, rSHR + lwz rWORD7, 0(rSTR1) + slw rB, rWORD8, rSHL + or rWORD8, rG, rH + blt cr7, L(duP1x) +L(duP1e): + lwz rWORD1, 4(rSTR1) + lwz rWORD2, 4(rSTR2) + cmplw cr5, rWORD7, rWORD8 + srw rA, rWORD2, rSHR + slw rD, rWORD2, rSHL + or rWORD2, rA, rB + lwz rWORD3, 8(rSTR1) + lwz rWORD4, 8(rSTR2) + cmplw cr0, rWORD1, rWORD2 + srw rC, rWORD4, rSHR + slw rF, rWORD4, rSHL + bne cr5, L(duLcr5) + or rWORD4, rC, rD + lwz rWORD5, 12(rSTR1) + lwz rWORD6, 12(rSTR2) + cmplw cr1, rWORD3, rWORD4 + srw rE, rWORD6, rSHR + slw rH, rWORD6, rSHL + bne cr0, L(duLcr0) + or rWORD6, rE, rF + cmplw cr6, rWORD5, rWORD6 + b L(duLoop3) + .align 4 +/* At this point we exit early with the first word compare + complete and remainder of 0 to 3 bytes. See L(du14) for details on + how we handle the remaining bytes. */ +L(duP1x): + cmplw cr5, rWORD7, rWORD8 + slwi. rN, rN, 3 + bne cr5, L(duLcr5) + cmplw cr7, rN, rSHR + beq L(duZeroReturn) + li rA, 0 + ble cr7, L(dutrim) + ld rWORD2, 8(rSTR2) + srw rA, rWORD2, rSHR + b L(dutrim) +/* Remainder is 8 */ + .align 4 +L(duP2): + srw rE, rWORD8, rSHR + lwz rWORD5, 0(rSTR1) + or rWORD6, rE, rH + slw rH, rWORD8, rSHL +L(duP2e): + lwz rWORD7, 4(rSTR1) + lwz rWORD8, 4(rSTR2) + cmplw cr6, rWORD5, rWORD6 + srw rG, rWORD8, rSHR + slw rB, rWORD8, rSHL + or rWORD8, rG, rH + blt cr7, L(duP2x) + lwz rWORD1, 8(rSTR1) + lwz rWORD2, 8(rSTR2) + cmplw cr5, rWORD7, rWORD8 + bne cr6, L(duLcr6) + srw rA, rWORD2, rSHR + slw rD, rWORD2, rSHL + or rWORD2, rA, rB + lwz rWORD3, 12(rSTR1) + lwz rWORD4, 12(rSTR2) + cmplw cr0, rWORD1, rWORD2 + bne cr5, L(duLcr5) + srw rC, rWORD4, rSHR + slw rF, rWORD4, rSHL + or rWORD4, rC, rD + addi rSTR1, rSTR1, 4 + addi rSTR2, rSTR2, 4 + cmplw cr1, rWORD3, rWORD4 + b L(duLoop2) + .align 4 +L(duP2x): + cmplw cr5, rWORD7, rWORD8 + addi rSTR1, rSTR1, 4 + addi rSTR2, rSTR2, 4 + bne cr6, L(duLcr6) + slwi. rN, rN, 3 + bne cr5, L(duLcr5) + cmplw cr7, rN, rSHR + beq L(duZeroReturn) + li rA, 0 + ble cr7, L(dutrim) + lwz rWORD2, 4(rSTR2) + srw rA, rWORD2, rSHR + b L(dutrim) + +/* Remainder is 12 */ + .align 4 +L(duP3): + srw rC, rWORD8, rSHR + lwz rWORD3, 0(rSTR1) + slw rF, rWORD8, rSHL + or rWORD4, rC, rH +L(duP3e): + lwz rWORD5, 4(rSTR1) + lwz rWORD6, 4(rSTR2) + cmplw cr1, rWORD3, rWORD4 + srw rE, rWORD6, rSHR + slw rH, rWORD6, rSHL + or rWORD6, rE, rF + lwz rWORD7, 8(rSTR1) + lwz rWORD8, 8(rSTR2) + cmplw cr6, rWORD5, rWORD6 + bne cr1, L(duLcr1) + srw rG, rWORD8, rSHR + slw rB, rWORD8, rSHL + or rWORD8, rG, rH + blt cr7, L(duP3x) + lwz rWORD1, 12(rSTR1) + lwz rWORD2, 12(rSTR2) + cmplw cr5, rWORD7, rWORD8 + bne cr6, L(duLcr6) + srw rA, rWORD2, rSHR + slw rD, rWORD2, rSHL + or rWORD2, rA, rB + addi rSTR1, rSTR1, 8 + addi rSTR2, rSTR2, 8 + cmplw cr0, rWORD1, rWORD2 + b L(duLoop1) + .align 4 +L(duP3x): + addi rSTR1, rSTR1, 8 + addi rSTR2, rSTR2, 8 + bne cr1, L(duLcr1) + cmplw cr5, rWORD7, rWORD8 + bne cr6, L(duLcr6) + slwi. rN, rN, 3 + bne cr5, L(duLcr5) + cmplw cr7, rN, rSHR + beq L(duZeroReturn) + li rA, 0 + ble cr7, L(dutrim) + lwz rWORD2, 4(rSTR2) + srw rA, rWORD2, rSHR + b L(dutrim) + +/* Count is a multiple of 16, remainder is 0 */ + .align 4 +L(duP4): + mtctr rTMP /* Power4 wants mtctr 1st in dispatch group */ + srw rA, rWORD8, rSHR + lwz rWORD1, 0(rSTR1) + slw rD, rWORD8, rSHL + or rWORD2, rA, rH +L(duP4e): + lwz rWORD3, 4(rSTR1) + lwz rWORD4, 4(rSTR2) + cmplw cr0, rWORD1, rWORD2 + srw rC, rWORD4, rSHR + slw rF, rWORD4, rSHL + or rWORD4, rC, rD + lwz rWORD5, 8(rSTR1) + lwz rWORD6, 8(rSTR2) + cmplw cr1, rWORD3, rWORD4 + bne cr0, L(duLcr0) + srw rE, rWORD6, rSHR + slw rH, rWORD6, rSHL + or rWORD6, rE, rF + lwzu rWORD7, 12(rSTR1) + lwzu rWORD8, 12(rSTR2) + cmplw cr6, rWORD5, rWORD6 + bne cr1, L(duLcr1) + srw rG, rWORD8, rSHR + slw rB, rWORD8, rSHL + or rWORD8, rG, rH + cmplw cr5, rWORD7, rWORD8 + bdz- L(du24) /* Adjust CTR as we start with +4 */ +/* This is the primary loop */ + .align 4 +L(duLoop): + lwz rWORD1, 4(rSTR1) + lwz rWORD2, 4(rSTR2) + cmplw cr1, rWORD3, rWORD4 + bne cr6, L(duLcr6) + srw rA, rWORD2, rSHR + slw rD, rWORD2, rSHL + or rWORD2, rA, rB +L(duLoop1): + lwz rWORD3, 8(rSTR1) + lwz rWORD4, 8(rSTR2) + cmplw cr6, rWORD5, rWORD6 + bne cr5, L(duLcr5) + srw rC, rWORD4, rSHR + slw rF, rWORD4, rSHL + or rWORD4, rC, rD +L(duLoop2): + lwz rWORD5, 12(rSTR1) + lwz rWORD6, 12(rSTR2) + cmplw cr5, rWORD7, rWORD8 + bne cr0, L(duLcr0) + srw rE, rWORD6, rSHR + slw rH, rWORD6, rSHL + or rWORD6, rE, rF +L(duLoop3): + lwzu rWORD7, 16(rSTR1) + lwzu rWORD8, 16(rSTR2) + cmplw cr0, rWORD1, rWORD2 + bne- cr1, L(duLcr1) + srw rG, rWORD8, rSHR + slw rB, rWORD8, rSHL + or rWORD8, rG, rH + bdnz+ L(duLoop) + +L(duL4): + bne cr1, L(duLcr1) + cmplw cr1, rWORD3, rWORD4 + bne cr6, L(duLcr6) + cmplw cr6, rWORD5, rWORD6 + bne cr5, L(duLcr5) + cmplw cr5, rWORD7, rWORD8 +L(du44): + bne cr0, L(duLcr0) +L(du34): + bne cr1, L(duLcr1) +L(du24): + bne cr6, L(duLcr6) +L(du14): + slwi. rN, rN, 3 + bne cr5, L(duLcr5) +/* At this point we have a remainder of 1 to 3 bytes to compare. We use + shift right to eliminate bits beyond the compare length. + + However it may not be safe to load rWORD2 which may be beyond the + string length. So we compare the bit length of the remainder to + the right shift count (rSHR). If the bit count is less than or equal + we do not need to load rWORD2 (all significant bits are already in + rB). */ + cmplw cr7, rN, rSHR + beq L(duZeroReturn) + li rA, 0 + ble cr7, L(dutrim) + lwz rWORD2, 4(rSTR2) + srw rA, rWORD2, rSHR + .align 4 +L(dutrim): + lwz rWORD1, 4(rSTR1) + lwz r31,48(1) + subfic rN, rN, 32 /* Shift count is 32 - (rN * 8). */ + or rWORD2, rA, rB + lwz r30,44(1) + lwz r29,40(r1) + srw rWORD1, rWORD1, rN + srw rWORD2, rWORD2, rN + lwz r28,36(r1) + lwz r27,32(r1) + cmplw rWORD1,rWORD2 + li rRTN,0 + beq L(dureturn26) + li rRTN,1 + bgt L(dureturn26) + li rRTN,-1 + b L(dureturn26) + .align 4 +L(duLcr0): + lwz r31,48(1) + lwz r30,44(1) + li rRTN, 1 + bgt cr0, L(dureturn29) + lwz r29,40(r1) + lwz r28,36(r1) + li rRTN, -1 + b L(dureturn27) + .align 4 +L(duLcr1): + lwz r31,48(1) + lwz r30,44(1) + li rRTN, 1 + bgt cr1, L(dureturn29) + lwz r29,40(r1) + lwz r28,36(r1) + li rRTN, -1 + b L(dureturn27) + .align 4 +L(duLcr6): + lwz r31,48(1) + lwz r30,44(1) + li rRTN, 1 + bgt cr6, L(dureturn29) + lwz r29,40(r1) + lwz r28,36(r1) + li rRTN, -1 + b L(dureturn27) + .align 4 +L(duLcr5): + lwz r31,48(1) + lwz r30,44(1) + li rRTN, 1 + bgt cr5, L(dureturn29) + lwz r29,40(r1) + lwz r28,36(r1) + li rRTN, -1 + b L(dureturn27) + .align 3 +L(duZeroReturn): + li rRTN,0 + .align 4 +L(dureturn): + lwz r31,48(1) + lwz r30,44(1) +L(dureturn29): + lwz r29,40(r1) + lwz r28,36(r1) +L(dureturn27): + lwz r27,32(r1) +L(dureturn26): + lwz r26,28(r1) +L(dureturn25): + lwz r25,24(r1) + lwz r24,20(r1) + lwz 1,0(1) + blr +END (BP_SYM (memcmp)) + +libc_hidden_builtin_def (memcmp) +weak_alias (memcmp, bcmp) diff --git a/sysdeps/powerpc/powerpc32/power4/memcopy.h b/sysdeps/powerpc/powerpc32/power4/memcopy.h new file mode 100644 index 0000000000..c05208da55 --- /dev/null +++ b/sysdeps/powerpc/powerpc32/power4/memcopy.h @@ -0,0 +1,113 @@ +/* memcopy.h -- definitions for memory copy functions. Generic C version. + Copyright (C) 1991, 1992, 1993, 1997, 2004, 2006 Free Software Foundation, Inc. + This file is part of the GNU C Library. + Contributed by Torbjorn Granlund (tege@sics.se). + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +/* The strategy of the memory functions is: + + 1. Copy bytes until the destination pointer is aligned. + + 2. Copy words in unrolled loops. If the source and destination + are not aligned in the same way, use word memory operations, + but shift and merge two read words before writing. + + 3. Copy the few remaining bytes. + + This is fast on processors that have at least 10 registers for + allocation by GCC, and that can access memory at reg+const in one + instruction. + + I made an "exhaustive" test of this memmove when I wrote it, + exhaustive in the sense that I tried all alignment and length + combinations, with and without overlap. */ + +#include <sysdeps/generic/memcopy.h> + +/* The macros defined in this file are: + + BYTE_COPY_FWD(dst_beg_ptr, src_beg_ptr, nbytes_to_copy) + + BYTE_COPY_BWD(dst_end_ptr, src_end_ptr, nbytes_to_copy) + + WORD_COPY_FWD(dst_beg_ptr, src_beg_ptr, nbytes_remaining, nbytes_to_copy) + + WORD_COPY_BWD(dst_end_ptr, src_end_ptr, nbytes_remaining, nbytes_to_copy) + + MERGE(old_word, sh_1, new_word, sh_2) + [I fail to understand. I feel stupid. --roland] +*/ + + +/* Threshold value for when to enter the unrolled loops. */ +#undef OP_T_THRES +#define OP_T_THRES 16 + +/* Copy exactly NBYTES bytes from SRC_BP to DST_BP, + without any assumptions about alignment of the pointers. */ +#undef BYTE_COPY_FWD +#define BYTE_COPY_FWD(dst_bp, src_bp, nbytes) \ + do \ + { \ + size_t __nbytes = (nbytes); \ + if (__nbytes & 1) \ + { \ + ((byte *) dst_bp)[0] = ((byte *) src_bp)[0]; \ + src_bp += 1; \ + dst_bp += 1; \ + __nbytes -= 1; \ + } \ + while (__nbytes > 0) \ + { \ + byte __x = ((byte *) src_bp)[0]; \ + byte __y = ((byte *) src_bp)[1]; \ + src_bp += 2; \ + __nbytes -= 2; \ + ((byte *) dst_bp)[0] = __x; \ + ((byte *) dst_bp)[1] = __y; \ + dst_bp += 2; \ + } \ + } while (0) + +/* Copy exactly NBYTES_TO_COPY bytes from SRC_END_PTR to DST_END_PTR, + beginning at the bytes right before the pointers and continuing towards + smaller addresses. Don't assume anything about alignment of the + pointers. */ +#undef BYTE_COPY_BWD +#define BYTE_COPY_BWD(dst_ep, src_ep, nbytes) \ + do \ + { \ + size_t __nbytes = (nbytes); \ + if (__nbytes & 1) \ + { \ + src_ep -= 1; \ + dst_ep -= 1; \ + ((byte *) dst_ep)[0] = ((byte *) src_ep)[0]; \ + __nbytes -= 1; \ + } \ + while (__nbytes > 0) \ + { \ + byte __x, __y; \ + src_ep -= 2; \ + __y = ((byte *) src_ep)[1]; \ + __x = ((byte *) src_ep)[0]; \ + dst_ep -= 2; \ + __nbytes -= 2; \ + ((byte *) dst_ep)[1] = __y; \ + ((byte *) dst_ep)[0] = __x; \ + } \ + } while (0) diff --git a/sysdeps/powerpc/powerpc32/power4/memcpy.S b/sysdeps/powerpc/powerpc32/power4/memcpy.S new file mode 100644 index 0000000000..73020c6da8 --- /dev/null +++ b/sysdeps/powerpc/powerpc32/power4/memcpy.S @@ -0,0 +1,426 @@ +/* Optimized memcpy implementation for PowerPC32 on PowerPC64. + Copyright (C) 2003, 2006 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA + 02110-1301 USA. */ + +#include <sysdep.h> +#include <bp-sym.h> +#include <bp-asm.h> + +/* __ptr_t [r3] memcpy (__ptr_t dst [r3], __ptr_t src [r4], size_t len [r5]); + Returns 'dst'. + + Memcpy handles short copies (< 32-bytes) using a binary move blocks + (no loops) of lwz/stw. The tail (remaining 1-3) bytes is handled + with the appropriate combination of byte and halfword load/stores. + There is minimal effort to optimize the alignment of short moves. + + Longer moves (>= 32-bytes) justify the effort to get at least the + destination word (4-byte) aligned. Further optimization is + possible when both source and destination are word aligned. + Each case has an optimized unrolled loop. */ + + .machine power4 +EALIGN (BP_SYM (memcpy), 5, 0) + CALL_MCOUNT + + stwu 1,-32(1) + cfi_adjust_cfa_offset(32) + stw 30,20(1) + cfi_offset(30,(20-32)) + mr 30,3 + cmplwi cr1,5,31 + stw 31,24(1) + cfi_offset(31,(24-32)) + neg 0,3 + andi. 11,3,3 /* check alignment of dst. */ + clrlwi 0,0,30 /* Number of bytes until the 1st word of dst. */ + clrlwi 10,4,30 /* check alignment of src. */ + cmplwi cr6,5,8 + ble- cr1,.L2 /* If move < 32 bytes use short move code. */ + cmplw cr6,10,11 + mr 12,4 + srwi 9,5,2 /* Number of full words remaining. */ + mtcrf 0x01,0 + mr 31,5 + beq .L0 + + subf 31,0,5 + /* Move 0-3 bytes as needed to get the destination word aligned. */ +1: bf 31,2f + lbz 6,0(12) + addi 12,12,1 + stb 6,0(3) + addi 3,3,1 +2: bf 30,0f + lhz 6,0(12) + addi 12,12,2 + sth 6,0(3) + addi 3,3,2 +0: + clrlwi 10,12,30 /* check alignment of src again. */ + srwi 9,31,2 /* Number of full words remaining. */ + + /* Copy words from source to destination, assuming the destination is + aligned on a word boundary. + + At this point we know there are at least 25 bytes left (32-7) to copy. + The next step is to determine if the source is also word aligned. + If not branch to the unaligned move code at .L6. which uses + a load, shift, store strategy. + + Otherwise source and destination are word aligned, and we can use + the optimized word copy loop. */ +.L0: + clrlwi 11,31,30 /* calculate the number of tail bytes */ + mtcrf 0x01,9 + bne- cr6,.L6 /* If source is not word aligned. */ + + /* Move words where destination and source are word aligned. + Use an unrolled loop to copy 4 words (16-bytes) per iteration. + If the the copy is not an exact multiple of 16 bytes, 1-3 + words are copied as needed to set up the main loop. After + the main loop exits there may be a tail of 1-3 bytes. These bytes are + copied a halfword/byte at a time as needed to preserve alignment. */ + + srwi 8,31,4 /* calculate the 16 byte loop count */ + cmplwi cr1,9,4 + cmplwi cr6,11,0 + mr 11,12 + + bf 30,1f + lwz 6,0(12) + lwz 7,4(12) + addi 11,12,8 + mtctr 8 + stw 6,0(3) + stw 7,4(3) + addi 10,3,8 + bf 31,4f + lwz 0,8(12) + stw 0,8(3) + blt cr1,3f + addi 11,12,12 + addi 10,3,12 + b 4f + .align 4 +1: + mr 10,3 + mtctr 8 + bf 31,4f + lwz 6,0(12) + addi 11,12,4 + stw 6,0(3) + addi 10,3,4 + + .align 4 +4: + lwz 6,0(11) + lwz 7,4(11) + lwz 8,8(11) + lwz 0,12(11) + stw 6,0(10) + stw 7,4(10) + stw 8,8(10) + stw 0,12(10) + addi 11,11,16 + addi 10,10,16 + bdnz 4b +3: + clrrwi 0,31,2 + mtcrf 0x01,31 + beq cr6,0f +.L9: + add 3,3,0 + add 12,12,0 + +/* At this point we have a tail of 0-3 bytes and we know that the + destination is word aligned. */ +2: bf 30,1f + lhz 6,0(12) + addi 12,12,2 + sth 6,0(3) + addi 3,3,2 +1: bf 31,0f + lbz 6,0(12) + stb 6,0(3) +0: + /* Return original dst pointer. */ + mr 3,30 + lwz 30,20(1) + lwz 31,24(1) + addi 1,1,32 + blr + +/* Copy up to 31 bytes. This is divided into two cases 0-8 bytes and + 9-31 bytes. Each case is handled without loops, using binary + (1,2,4,8) tests. + + In the short (0-8 byte) case no attempt is made to force alignment + of either source or destination. The hardware will handle the + unaligned load/stores with small delays for crossing 32- 64-byte, and + 4096-byte boundaries. Since these short moves are unlikely to be + unaligned or cross these boundaries, the overhead to force + alignment is not justified. + + The longer (9-31 byte) move is more likely to cross 32- or 64-byte + boundaries. Since only loads are sensitive to the 32-/64-byte + boundaries it is more important to align the source than the + destination. If the source is not already word aligned, we first + move 1-3 bytes as needed. While the destination and stores may + still be unaligned, this is only an issue for page (4096 byte + boundary) crossing, which should be rare for these short moves. + The hardware handles this case automatically with a small delay. */ + + .align 4 +.L2: + mtcrf 0x01,5 + neg 8,4 + clrrwi 11,4,2 + andi. 0,8,3 + ble cr6,.LE8 /* Handle moves of 0-8 bytes. */ +/* At least 9 bytes left. Get the source word aligned. */ + cmplwi cr1,5,16 + mr 10,5 + mr 12,4 + cmplwi cr6,0,2 + beq .L3 /* If the source is already word aligned skip this. */ +/* Copy 1-3 bytes to get source address word aligned. */ + lwz 6,0(11) + subf 10,0,5 + add 12,4,0 + blt cr6,5f + srwi 7,6,16 + bgt cr6,3f + sth 6,0(3) + b 7f + .align 4 +3: + stb 7,0(3) + sth 6,1(3) + b 7f + .align 4 +5: + stb 6,0(3) +7: + cmplwi cr1,10,16 + add 3,3,0 + mtcrf 0x01,10 + .align 4 +.L3: +/* At least 6 bytes left and the source is word aligned. */ + blt cr1,8f +16: /* Move 16 bytes. */ + lwz 6,0(12) + lwz 7,4(12) + stw 6,0(3) + lwz 6,8(12) + stw 7,4(3) + lwz 7,12(12) + addi 12,12,16 + stw 6,8(3) + stw 7,12(3) + addi 3,3,16 +8: /* Move 8 bytes. */ + bf 28,4f + lwz 6,0(12) + lwz 7,4(12) + addi 12,12,8 + stw 6,0(3) + stw 7,4(3) + addi 3,3,8 +4: /* Move 4 bytes. */ + bf 29,2f + lwz 6,0(12) + addi 12,12,4 + stw 6,0(3) + addi 3,3,4 +2: /* Move 2-3 bytes. */ + bf 30,1f + lhz 6,0(12) + sth 6,0(3) + bf 31,0f + lbz 7,2(12) + stb 7,2(3) + mr 3,30 + lwz 30,20(1) + addi 1,1,32 + blr +1: /* Move 1 byte. */ + bf 31,0f + lbz 6,0(12) + stb 6,0(3) +0: + /* Return original dst pointer. */ + mr 3,30 + lwz 30,20(1) + addi 1,1,32 + blr + +/* Special case to copy 0-8 bytes. */ + .align 4 +.LE8: + mr 12,4 + bne cr6,4f + lwz 6,0(4) + lwz 7,4(4) + stw 6,0(3) + stw 7,4(3) + /* Return original dst pointer. */ + mr 3,30 + lwz 30,20(1) + addi 1,1,32 + blr + .align 4 +4: bf 29,2b + lwz 6,0(4) + stw 6,0(3) +6: + bf 30,5f + lhz 7,4(4) + sth 7,4(3) + bf 31,0f + lbz 8,6(4) + stb 8,6(3) + mr 3,30 + lwz 30,20(1) + addi 1,1,32 + blr + .align 4 +5: + bf 31,0f + lbz 6,4(4) + stb 6,4(3) + .align 4 +0: + /* Return original dst pointer. */ + mr 3,30 + lwz 30,20(1) + addi 1,1,32 + blr + + .align 4 +.L6: + + /* Copy words where the destination is aligned but the source is + not. Use aligned word loads from the source, shifted to realign + the data, to allow aligned destination stores. + Use an unrolled loop to copy 4 words (16-bytes) per iteration. + A single word is retained for storing at loop exit to avoid walking + off the end of a page within the loop. + If the copy is not an exact multiple of 16 bytes, 1-3 + words are copied as needed to set up the main loop. After + the main loop exits there may be a tail of 1-3 bytes. These bytes are + copied a halfword/byte at a time as needed to preserve alignment. */ + + + cmplwi cr6,11,0 /* are there tail bytes left ? */ + subf 5,10,12 /* back up src pointer to prev word alignment */ + slwi 10,10,3 /* calculate number of bits to shift 1st word left */ + addi 11,9,-1 /* we move one word after the loop */ + srwi 8,11,2 /* calculate the 16 byte loop count */ + lwz 6,0(5) /* load 1st src word into R6 */ + mr 4,3 + lwz 7,4(5) /* load 2nd src word into R7 */ + mtcrf 0x01,11 + subfic 9,10,32 /* number of bits to shift 2nd word right */ + mtctr 8 + bf 30,1f + + /* there are at least two words to copy, so copy them */ + slw 0,6,10 /* shift 1st src word to left align it in R0 */ + srw 8,7,9 /* shift 2nd src word to right align it in R8 */ + or 0,0,8 /* or them to get word to store */ + lwz 6,8(5) /* load the 3rd src word */ + stw 0,0(4) /* store the 1st dst word */ + slw 0,7,10 /* now left align 2nd src word into R0 */ + srw 8,6,9 /* shift 3rd src word to right align it in R8 */ + or 0,0,8 /* or them to get word to store */ + lwz 7,12(5) + stw 0,4(4) /* store the 2nd dst word */ + addi 4,4,8 + addi 5,5,16 + bf 31,4f + /* there is a third word to copy, so copy it */ + slw 0,6,10 /* shift 3rd src word to left align it in R0 */ + srw 8,7,9 /* shift 4th src word to right align it in R8 */ + or 0,0,8 /* or them to get word to store */ + stw 0,0(4) /* store 3rd dst word */ + mr 6,7 + lwz 7,0(5) + addi 5,5,4 + addi 4,4,4 + b 4f + .align 4 +1: + slw 0,6,10 /* shift 1st src word to left align it in R0 */ + srw 8,7,9 /* shift 2nd src word to right align it in R8 */ + addi 5,5,8 + or 0,0,8 /* or them to get word to store */ + bf 31,4f + mr 6,7 + lwz 7,0(5) + addi 5,5,4 + stw 0,0(4) /* store the 1st dst word */ + addi 4,4,4 + + .align 4 +4: + /* copy 16 bytes at a time */ + slw 0,6,10 + srw 8,7,9 + or 0,0,8 + lwz 6,0(5) + stw 0,0(4) + slw 0,7,10 + srw 8,6,9 + or 0,0,8 + lwz 7,4(5) + stw 0,4(4) + slw 0,6,10 + srw 8,7,9 + or 0,0,8 + lwz 6,8(5) + stw 0,8(4) + slw 0,7,10 + srw 8,6,9 + or 0,0,8 + lwz 7,12(5) + stw 0,12(4) + addi 5,5,16 + addi 4,4,16 + bdnz+ 4b +8: + /* calculate and store the final word */ + slw 0,6,10 + srw 8,7,9 + or 0,0,8 + stw 0,0(4) +3: + clrrwi 0,31,2 + mtcrf 0x01,31 + bne cr6,.L9 /* If the tail is 0 bytes we are done! */ + + /* Return original dst pointer. */ + mr 3,30 + lwz 30,20(1) + lwz 31,24(1) + addi 1,1,32 + blr +END (BP_SYM (memcpy)) + +libc_hidden_builtin_def (memcpy) diff --git a/sysdeps/powerpc/powerpc32/power4/memset.S b/sysdeps/powerpc/powerpc32/power4/memset.S new file mode 100644 index 0000000000..5dd1d943cf --- /dev/null +++ b/sysdeps/powerpc/powerpc32/power4/memset.S @@ -0,0 +1,229 @@ +/* Optimized memset implementation for PowerPC64. + Copyright (C) 1997,99, 2000,02,03, 2006 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA + 02110-1301 USA. */ + +#include <sysdep.h> +#include <bp-sym.h> +#include <bp-asm.h> + +/* __ptr_t [r3] memset (__ptr_t s [r3], int c [r4], size_t n [r5])); + Returns 's'. + + The memset is done in three sizes: byte (8 bits), word (32 bits), + cache line (1024 bits). There is a special case for setting cache lines + to 0, to take advantage of the dcbz instruction. */ + + .machine power4 +EALIGN (BP_SYM (memset), 5, 0) + CALL_MCOUNT + +#define rTMP r0 +#define rRTN r3 /* Initial value of 1st argument. */ +#define rMEMP0 r3 /* Original value of 1st arg. */ +#define rCHR r4 /* Char to set in each byte. */ +#define rLEN r5 /* Length of region to set. */ +#define rMEMP r6 /* Address at which we are storing. */ +#define rALIGN r7 /* Number of bytes we are setting now (when aligning). */ +#define rMEMP2 r8 + +#define rNEG64 r8 /* Constant -64 for clearing with dcbz. */ +#define rCLS r8 /* Cache line size (known to be 128). */ +#define rCLM r9 /* Cache line size mask to check for cache alignment. */ +L(_memset): +/* Take care of case for size <= 4. */ + cmplwi cr1, rLEN, 4 + andi. rALIGN, rMEMP0, 3 + mr rMEMP, rMEMP0 + ble- cr1, L(small) + +/* Align to word boundary. */ + cmplwi cr5, rLEN, 31 + rlwimi rCHR, rCHR, 8, 16, 23 /* Replicate byte to halfword. */ + beq+ L(aligned) + mtcrf 0x01, rMEMP0 + subfic rALIGN, rALIGN, 4 + add rMEMP, rMEMP, rALIGN + sub rLEN, rLEN, rALIGN + bf+ 31, L(g0) + stb rCHR, 0(rMEMP0) + bt 30, L(aligned) +L(g0): + sth rCHR, -2(rMEMP) + +/* Handle the case of size < 31. */ +L(aligned): + mtcrf 0x01, rLEN + rlwimi rCHR, rCHR, 16, 0, 15 /* Replicate halfword to word. */ + ble cr5, L(medium) +/* Align to 32-byte boundary. */ + andi. rALIGN, rMEMP, 0x1C + subfic rALIGN, rALIGN, 0x20 + beq L(caligned) + mtcrf 0x01, rALIGN + add rMEMP, rMEMP, rALIGN + sub rLEN, rLEN, rALIGN + cmplwi cr1, rALIGN, 0x10 + mr rMEMP2, rMEMP + bf 28, L(a1) + stw rCHR, -4(rMEMP2) + stwu rCHR, -8(rMEMP2) +L(a1): blt cr1, L(a2) + stw rCHR, -4(rMEMP2) + stw rCHR, -8(rMEMP2) + stw rCHR, -12(rMEMP2) + stwu rCHR, -16(rMEMP2) +L(a2): bf 29, L(caligned) + stw rCHR, -4(rMEMP2) + +/* Now aligned to a 32 byte boundary. */ +L(caligned): + cmplwi cr1, rCHR, 0 + clrrwi. rALIGN, rLEN, 5 + mtcrf 0x01, rLEN + beq cr1, L(zloopstart) /* Special case for clearing memory using dcbz. */ +L(nondcbz): + srwi rTMP, rALIGN, 5 + mtctr rTMP + beq L(medium) /* We may not actually get to do a full line. */ + clrlwi. rLEN, rLEN, 27 + add rMEMP, rMEMP, rALIGN + li rNEG64, -0x40 + bdz L(cloopdone) + + .align 4 +L(c3): dcbtst rNEG64, rMEMP + stw rCHR, -4(rMEMP) + stw rCHR, -8(rMEMP) + stw rCHR, -12(rMEMP) + stw rCHR, -16(rMEMP) + stw rCHR, -20(rMEMP) + stw rCHR, -24(rMEMP) + stw rCHR, -28(rMEMP) + stwu rCHR, -32(rMEMP) + bdnz L(c3) +L(cloopdone): + stw rCHR, -4(rMEMP) + stw rCHR, -8(rMEMP) + stw rCHR, -12(rMEMP) + stw rCHR, -16(rMEMP) + cmplwi cr1, rLEN, 16 + stw rCHR, -20(rMEMP) + stw rCHR, -24(rMEMP) + stw rCHR, -28(rMEMP) + stwu rCHR, -32(rMEMP) + beqlr + add rMEMP, rMEMP, rALIGN + b L(medium_tail2) + + .align 5 +/* Clear lines of memory in 128-byte chunks. */ +L(zloopstart): +/* If the remaining length is less the 32 bytes, don't bother getting + the cache line size. */ + beq L(medium) + li rCLS,128 /* cache line size is 128 */ + dcbt 0,rMEMP +L(getCacheAligned): + cmplwi cr1,rLEN,32 + andi. rTMP,rMEMP,127 + blt cr1,L(handletail32) + beq L(cacheAligned) + addi rMEMP,rMEMP,32 + addi rLEN,rLEN,-32 + stw rCHR,-32(rMEMP) + stw rCHR,-28(rMEMP) + stw rCHR,-24(rMEMP) + stw rCHR,-20(rMEMP) + stw rCHR,-16(rMEMP) + stw rCHR,-12(rMEMP) + stw rCHR,-8(rMEMP) + stw rCHR,-4(rMEMP) + b L(getCacheAligned) + +/* Now we are aligned to the cache line and can use dcbz. */ + .align 4 +L(cacheAligned): + cmplw cr1,rLEN,rCLS + blt cr1,L(handletail32) + dcbz 0,rMEMP + subf rLEN,rCLS,rLEN + add rMEMP,rMEMP,rCLS + b L(cacheAligned) + +/* We are here because the cache line size was set and the remainder + (rLEN) is less than the actual cache line size. + So set up the preconditions for L(nondcbz) and go there. */ +L(handletail32): + clrrwi. rALIGN, rLEN, 5 + b L(nondcbz) + + .align 5 +L(small): +/* Memset of 4 bytes or less. */ + cmplwi cr5, rLEN, 1 + cmplwi cr1, rLEN, 3 + bltlr cr5 + stb rCHR, 0(rMEMP) + beqlr cr5 + stb rCHR, 1(rMEMP) + bltlr cr1 + stb rCHR, 2(rMEMP) + beqlr cr1 + stb rCHR, 3(rMEMP) + blr + +/* Memset of 0-31 bytes. */ + .align 5 +L(medium): + cmplwi cr1, rLEN, 16 +L(medium_tail2): + add rMEMP, rMEMP, rLEN +L(medium_tail): + bt- 31, L(medium_31t) + bt- 30, L(medium_30t) +L(medium_30f): + bt- 29, L(medium_29t) +L(medium_29f): + bge- cr1, L(medium_27t) + bflr- 28 + stw rCHR, -4(rMEMP) + stw rCHR, -8(rMEMP) + blr + +L(medium_31t): + stbu rCHR, -1(rMEMP) + bf- 30, L(medium_30f) +L(medium_30t): + sthu rCHR, -2(rMEMP) + bf- 29, L(medium_29f) +L(medium_29t): + stwu rCHR, -4(rMEMP) + blt- cr1, L(medium_27f) +L(medium_27t): + stw rCHR, -4(rMEMP) + stw rCHR, -8(rMEMP) + stw rCHR, -12(rMEMP) + stwu rCHR, -16(rMEMP) +L(medium_27f): + bflr- 28 +L(medium_28t): + stw rCHR, -4(rMEMP) + stw rCHR, -8(rMEMP) + blr +END (BP_SYM (memset)) +libc_hidden_builtin_def (memset) diff --git a/sysdeps/powerpc/powerpc32/power4/strncmp.S b/sysdeps/powerpc/powerpc32/power4/strncmp.S new file mode 100644 index 0000000000..fc0835ebe0 --- /dev/null +++ b/sysdeps/powerpc/powerpc32/power4/strncmp.S @@ -0,0 +1,176 @@ +/* Optimized strcmp implementation for PowerPC32. + Copyright (C) 2003, 2006 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA + 02110-1301 USA. */ + +#include <sysdep.h> +#include <bp-sym.h> +#include <bp-asm.h> + +/* See strlen.s for comments on how the end-of-string testing works. */ + +/* int [r3] strncmp (const char *s1 [r3], const char *s2 [r4], size_t size [r5]) */ + +EALIGN (BP_SYM(strncmp), 4, 0) + +#define rTMP r0 +#define rRTN r3 +#define rSTR1 r3 /* first string arg */ +#define rSTR2 r4 /* second string arg */ +#define rN r5 /* max string length */ +/* Note: The Bounded pointer support in this code is broken. This code + was inherited from PPC32 and and that support was never completed. + Current PPC gcc does not support -fbounds-check or -fbounded-pointers. */ +#define rWORD1 r6 /* current word in s1 */ +#define rWORD2 r7 /* current word in s2 */ +#define rWORD3 r10 +#define rWORD4 r11 +#define rFEFE r8 /* constant 0xfefefeff (-0x01010101) */ +#define r7F7F r9 /* constant 0x7f7f7f7f */ +#define rNEG r10 /* ~(word in s1 | 0x7f7f7f7f) */ +#define rBITDIF r11 /* bits that differ in s1 & s2 words */ + + dcbt 0,rSTR1 + or rTMP, rSTR2, rSTR1 + lis r7F7F, 0x7f7f + dcbt 0,rSTR2 + clrlwi. rTMP, rTMP, 30 + cmplwi cr1, rN, 0 + lis rFEFE, -0x101 + bne L(unaligned) +/* We are word alligned so set up for two loops. first a word + loop, then fall into the byte loop if any residual. */ + srwi. rTMP, rN, 2 + clrlwi rN, rN, 30 + addi rFEFE, rFEFE, -0x101 + addi r7F7F, r7F7F, 0x7f7f + cmplwi cr1, rN, 0 + beq L(unaligned) + + mtctr rTMP /* Power4 wants mtctr 1st in dispatch group. */ + lwz rWORD1, 0(rSTR1) + lwz rWORD2, 0(rSTR2) + b L(g1) + +L(g0): + lwzu rWORD1, 4(rSTR1) + bne- cr1, L(different) + lwzu rWORD2, 4(rSTR2) +L(g1): add rTMP, rFEFE, rWORD1 + nor rNEG, r7F7F, rWORD1 + bdz L(tail) + and. rTMP, rTMP, rNEG + cmpw cr1, rWORD1, rWORD2 + beq+ L(g0) + +/* OK. We've hit the end of the string. We need to be careful that + we don't compare two strings as different because of gunk beyond + the end of the strings... */ + +L(endstring): + and rTMP, r7F7F, rWORD1 + beq cr1, L(equal) + add rTMP, rTMP, r7F7F + xor. rBITDIF, rWORD1, rWORD2 + + andc rNEG, rNEG, rTMP + blt- L(highbit) + cntlzw rBITDIF, rBITDIF + cntlzw rNEG, rNEG + addi rNEG, rNEG, 7 + cmpw cr1, rNEG, rBITDIF + sub rRTN, rWORD1, rWORD2 + blt- cr1, L(equal) + srawi rRTN, rRTN, 31 + ori rRTN, rRTN, 1 + blr +L(equal): + li rRTN, 0 + blr + +L(different): + lwzu rWORD1, -4(rSTR1) + xor. rBITDIF, rWORD1, rWORD2 + sub rRTN, rWORD1, rWORD2 + blt- L(highbit) + srawi rRTN, rRTN, 31 + ori rRTN, rRTN, 1 + blr +L(highbit): + srwi rWORD2, rWORD2, 24 + srwi rWORD1, rWORD1, 24 + sub rRTN, rWORD1, rWORD2 + blr + + +/* Oh well. In this case, we just do a byte-by-byte comparison. */ + .align 4 +L(tail): + and. rTMP, rTMP, rNEG + cmpw cr1, rWORD1, rWORD2 + bne- L(endstring) + addi rSTR1, rSTR1, 4 + bne- cr1, L(different) + addi rSTR2, rSTR2, 4 + cmplwi cr1, rN, 0 +L(unaligned): + mtctr rN /* Power4 wants mtctr 1st in dispatch group */ + ble cr1, L(ux) +L(uz): + lbz rWORD1, 0(rSTR1) + lbz rWORD2, 0(rSTR2) + .align 4 +L(u1): + cmpwi cr1, rWORD1, 0 + bdz L(u4) + cmpw rWORD1, rWORD2 + beq- cr1, L(u4) + lbzu rWORD3, 1(rSTR1) + lbzu rWORD4, 1(rSTR2) + bne- L(u4) + cmpwi cr1, rWORD3, 0 + bdz L(u3) + cmpw rWORD3, rWORD4 + beq- cr1, L(u3) + lbzu rWORD1, 1(rSTR1) + lbzu rWORD2, 1(rSTR2) + bne- L(u3) + cmpwi cr1, rWORD1, 0 + bdz L(u4) + cmpw rWORD1, rWORD2 + beq- cr1, L(u4) + lbzu rWORD3, 1(rSTR1) + lbzu rWORD4, 1(rSTR2) + bne- L(u4) + cmpwi cr1, rWORD3, 0 + bdz L(u3) + cmpw rWORD3, rWORD4 + beq- cr1, L(u3) + lbzu rWORD1, 1(rSTR1) + lbzu rWORD2, 1(rSTR2) + beq+ L(u1) + +L(u3): sub rRTN, rWORD3, rWORD4 + blr +L(u4): sub rRTN, rWORD1, rWORD2 + blr +L(ux): + li rRTN, 0 + blr +END (BP_SYM (strncmp)) +libc_hidden_builtin_def (strncmp) + diff --git a/sysdeps/powerpc/powerpc32/power4/wordcopy.c b/sysdeps/powerpc/powerpc32/power4/wordcopy.c new file mode 100644 index 0000000000..f71b41dc42 --- /dev/null +++ b/sysdeps/powerpc/powerpc32/power4/wordcopy.c @@ -0,0 +1,209 @@ +/* _memcopy.c -- subroutines for memory copy functions. + Copyright (C) 1991, 1996 Free Software Foundation, Inc. + This file is part of the GNU C Library. + Contributed by Torbjorn Granlund (tege@sics.se). + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +/* BE VERY CAREFUL IF YOU CHANGE THIS CODE...! */ + +#include <stddef.h> +#include <memcopy.h> + +/* _wordcopy_fwd_aligned -- Copy block beginning at SRCP to + block beginning at DSTP with LEN `op_t' words (not LEN bytes!). + Both SRCP and DSTP should be aligned for memory operations on `op_t's. */ + +void +_wordcopy_fwd_aligned (dstp, srcp, len) + long int dstp; + long int srcp; + size_t len; +{ + op_t a0, a1; + + if (len & 1) + { + ((op_t *) dstp)[0] = ((op_t *) srcp)[0]; + + if (len == 1) + return; + srcp += OPSIZ; + dstp += OPSIZ; + len -= 1; + } + + do + { + a0 = ((op_t *) srcp)[0]; + a1 = ((op_t *) srcp)[1]; + ((op_t *) dstp)[0] = a0; + ((op_t *) dstp)[1] = a1; + + srcp += 2 * OPSIZ; + dstp += 2 * OPSIZ; + len -= 2; + } + while (len != 0); +} + +/* _wordcopy_fwd_dest_aligned -- Copy block beginning at SRCP to + block beginning at DSTP with LEN `op_t' words (not LEN bytes!). + DSTP should be aligned for memory operations on `op_t's, but SRCP must + *not* be aligned. */ + +void +_wordcopy_fwd_dest_aligned (dstp, srcp, len) + long int dstp; + long int srcp; + size_t len; +{ + op_t a0, a1, a2; + int sh_1, sh_2; + + /* Calculate how to shift a word read at the memory operation + aligned srcp to make it aligned for copy. */ + + sh_1 = 8 * (srcp % OPSIZ); + sh_2 = 8 * OPSIZ - sh_1; + + /* Make SRCP aligned by rounding it down to the beginning of the `op_t' + it points in the middle of. */ + srcp &= -OPSIZ; + a0 = ((op_t *) srcp)[0]; + + if (len & 1) + { + a1 = ((op_t *) srcp)[1]; + ((op_t *) dstp)[0] = MERGE (a0, sh_1, a1, sh_2); + + if (len == 1) + return; + + a0 = a1; + srcp += OPSIZ; + dstp += OPSIZ; + len -= 1; + } + + do + { + a1 = ((op_t *) srcp)[1]; + a2 = ((op_t *) srcp)[2]; + ((op_t *) dstp)[0] = MERGE (a0, sh_1, a1, sh_2); + ((op_t *) dstp)[1] = MERGE (a1, sh_1, a2, sh_2); + a0 = a2; + + srcp += 2 * OPSIZ; + dstp += 2 * OPSIZ; + len -= 2; + } + while (len != 0); +} + +/* _wordcopy_bwd_aligned -- Copy block finishing right before + SRCP to block finishing right before DSTP with LEN `op_t' words + (not LEN bytes!). Both SRCP and DSTP should be aligned for memory + operations on `op_t's. */ + +void +_wordcopy_bwd_aligned (dstp, srcp, len) + long int dstp; + long int srcp; + size_t len; +{ + op_t a0, a1; + + if (len & 1) + { + srcp -= OPSIZ; + dstp -= OPSIZ; + ((op_t *) dstp)[0] = ((op_t *) srcp)[0]; + + if (len == 1) + return; + len -= 1; + } + + do + { + srcp -= 2 * OPSIZ; + dstp -= 2 * OPSIZ; + + a1 = ((op_t *) srcp)[1]; + a0 = ((op_t *) srcp)[0]; + ((op_t *) dstp)[1] = a1; + ((op_t *) dstp)[0] = a0; + + len -= 2; + } + while (len != 0); +} + +/* _wordcopy_bwd_dest_aligned -- Copy block finishing right + before SRCP to block finishing right before DSTP with LEN `op_t' + words (not LEN bytes!). DSTP should be aligned for memory + operations on `op_t', but SRCP must *not* be aligned. */ + +void +_wordcopy_bwd_dest_aligned (dstp, srcp, len) + long int dstp; + long int srcp; + size_t len; +{ + op_t a0, a1, a2; + int sh_1, sh_2; + + /* Calculate how to shift a word read at the memory operation + aligned srcp to make it aligned for copy. */ + + sh_1 = 8 * (srcp % OPSIZ); + sh_2 = 8 * OPSIZ - sh_1; + + /* Make srcp aligned by rounding it down to the beginning of the op_t + it points in the middle of. */ + srcp &= -OPSIZ; + a2 = ((op_t *) srcp)[0]; + + if (len & 1) + { + srcp -= OPSIZ; + dstp -= OPSIZ; + a1 = ((op_t *) srcp)[0]; + ((op_t *) dstp)[0] = MERGE (a1, sh_1, a2, sh_2); + + if (len == 1) + return; + + a2 = a1; + len -= 1; + } + + do + { + srcp -= 2 * OPSIZ; + dstp -= 2 * OPSIZ; + + a1 = ((op_t *) srcp)[1]; + a0 = ((op_t *) srcp)[0]; + ((op_t *) dstp)[1] = MERGE (a1, sh_1, a2, sh_2); + ((op_t *) dstp)[0] = MERGE (a0, sh_1, a1, sh_2); + a2 = a0; + + len -= 2; + } + while (len != 0); +} |