diff options
Diffstat (limited to 'manual/signal.texi')
| -rw-r--r-- | manual/signal.texi | 128 |
1 files changed, 128 insertions, 0 deletions
diff --git a/manual/signal.texi b/manual/signal.texi index adcda37520..f0e57ddbe4 100644 --- a/manual/signal.texi +++ b/manual/signal.texi @@ -889,6 +889,20 @@ may come from a signal handler in the same process. @comment string.h @comment GNU @deftypefun {char *} strsignal (int @var{signum}) +@safety{@prelim{}@mtunsafe{@mtasurace{:strsignal} @mtslocale{}}@asunsafe{@asuinit{} @ascuintl{} @asucorrupt{} @ascuheap{}}@acunsafe{@acuinit{} @acucorrupt{} @acsmem{}}} +@c strsignal @mtasurace:strsignal @mtslocale @asuinit @ascuintl @asucorrupt @ascuheap @acucorrupt @acsmem +@c uses a static buffer if tsd key creation fails +@c [once] init +@c libc_key_create ok +@c pthread_key_create dup ok +@c getbuffer @asucorrupt @ascuheap @acsmem +@c libc_getspecific ok +@c pthread_getspecific dup ok +@c malloc dup @ascuheap @acsmem +@c libc_setspecific @asucorrupt @ascuheap @acucorrupt @acsmem +@c pthread_setspecific dup @asucorrupt @ascuheap @acucorrupt @acsmem +@c snprintf dup @mtslocale @ascuheap @acsmem +@c _ @ascuintl This function returns a pointer to a statically-allocated string containing a message describing the signal @var{signum}. You should not modify the contents of this string; and, since it can be @@ -903,6 +917,12 @@ This function is a GNU extension, declared in the header file @comment signal.h @comment BSD @deftypefun void psignal (int @var{signum}, const char *@var{message}) +@safety{@prelim{}@mtsafe{@mtslocale{}}@asunsafe{@asucorrupt{} @ascuintl{} @ascuheap{}}@acunsafe{@aculock{} @acucorrupt{} @acsmem{}}} +@c psignal @mtslocale @asucorrupt @ascuintl @ascuheap @aculock @acucorrupt @acsmem +@c _ @ascuintl +@c fxprintf @asucorrupt @aculock @acucorrupt +@c asprintf @mtslocale @ascuheap @acsmem +@c free dup @ascuheap @acsmem This function prints a message describing the signal @var{signum} to the standard error output stream @code{stderr}; see @ref{Standard Streams}. @@ -972,6 +992,12 @@ The name @code{sighandler_t} for this data type is a GNU extension. @comment signal.h @comment ISO @deftypefun sighandler_t signal (int @var{signum}, sighandler_t @var{action}) +@safety{@prelim{}@mtsafe{@mtssigintr{}}@assafe{}@acsafe{}} +@c signal ok +@c sigemptyset dup ok +@c sigaddset dup ok +@c sigismember dup ok +@c sigaction dup ok The @code{signal} function establishes @var{action} as the action for the signal @var{signum}. @@ -1094,6 +1120,10 @@ example because these are designed to provide information for debugging @comment signal.h @comment GNU @deftypefun sighandler_t sysv_signal (int @var{signum}, sighandler_t @var{action}) +@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}} +@c sysv_signal ok +@c sigemptyset dup ok +@c sigaction dup ok The @code{sysv_signal} implements the behavior of the standard @code{signal} function as found on SVID systems. The difference to BSD systems is that the handler is deinstalled after a delivery of a signal. @@ -1106,6 +1136,8 @@ preferred method. @comment signal.h @comment SVID @deftypefun sighandler_t ssignal (int @var{signum}, sighandler_t @var{action}) +@safety{@prelim{}@mtsafe{@mtssigintr{}}@assafe{}@acsafe{}} +@c Aliases signal and bsd_signal. The @code{ssignal} function does the same thing as @code{signal}; it is provided only for compatibility with SVID. @end deftypefun @@ -1172,6 +1204,7 @@ the signal. These are described in more detail in @ref{Flags for Sigaction}. @comment signal.h @comment POSIX.1 @deftypefun int sigaction (int @var{signum}, const struct sigaction *restrict @var{action}, struct sigaction *restrict @var{old-action}) +@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}} The @var{action} argument is used to set up a new action for the signal @var{signum}, while the @var{old-action} argument is used to return information about the action previously associated with this symbol. @@ -2168,6 +2201,14 @@ function is declared in @file{signal.h}. @comment signal.h @comment ISO @deftypefun int raise (int @var{signum}) +@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}} +@c raise ok +@c [posix] +@c getpid dup ok +@c kill dup ok +@c [linux] +@c syscall(gettid) ok +@c syscall(tgkill) ok The @code{raise} function sends the signal @var{signum} to the calling process. It returns zero if successful and a nonzero value if it fails. About the only reason for failure would be if the value of @var{signum} @@ -2177,6 +2218,8 @@ is invalid. @comment signal.h @comment SVID @deftypefun int gsignal (int @var{signum}) +@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}} +@c Aliases raise. The @code{gsignal} function does the same thing as @code{raise}; it is provided only for compatibility with SVID. @end deftypefun @@ -2269,6 +2312,11 @@ The @code{kill} function is declared in @file{signal.h}. @comment signal.h @comment POSIX.1 @deftypefun int kill (pid_t @var{pid}, int @var{signum}) +@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}} +@c The hurd implementation is not a critical section, so it's not +@c immediately obvious that, in case of cancellation, it won't leak +@c ports or the memory allocated by proc_getpgrppids when pid <= 0. +@c Since none of these make it AC-Unsafe, I'm leaving them out. The @code{kill} function sends the signal @var{signum} to the process or process group specified by @var{pid}. Besides the signals listed in @ref{Standard Signals}, @var{signum} can also have a value of zero to @@ -2325,6 +2373,8 @@ The @var{pid} argument does not refer to an existing process or group. @comment signal.h @comment BSD @deftypefun int killpg (int @var{pgid}, int @var{signum}) +@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}} +@c Calls kill with -pgid. This is similar to @code{kill}, but sends signal @var{signum} to the process group @var{pgid}. This function is provided for compatibility with BSD; using @code{kill} to do this is more portable. @@ -2497,6 +2547,8 @@ about.) @comment signal.h @comment POSIX.1 @deftypefun int sigemptyset (sigset_t *@var{set}) +@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}} +@c Just memsets all of set to zero. This function initializes the signal set @var{set} to exclude all of the defined signals. It always returns @code{0}. @end deftypefun @@ -2504,6 +2556,7 @@ defined signals. It always returns @code{0}. @comment signal.h @comment POSIX.1 @deftypefun int sigfillset (sigset_t *@var{set}) +@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}} This function initializes the signal set @var{set} to include all of the defined signals. Again, the return value is @code{0}. @end deftypefun @@ -2511,6 +2564,7 @@ all of the defined signals. Again, the return value is @code{0}. @comment signal.h @comment POSIX.1 @deftypefun int sigaddset (sigset_t *@var{set}, int @var{signum}) +@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}} This function adds the signal @var{signum} to the signal set @var{set}. All @code{sigaddset} does is modify @var{set}; it does not block or unblock any signals. @@ -2527,6 +2581,7 @@ The @var{signum} argument doesn't specify a valid signal. @comment signal.h @comment POSIX.1 @deftypefun int sigdelset (sigset_t *@var{set}, int @var{signum}) +@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}} This function removes the signal @var{signum} from the signal set @var{set}. All @code{sigdelset} does is modify @var{set}; it does not block or unblock any signals. The return value and error conditions are @@ -2538,6 +2593,7 @@ Finally, there is a function to test what signals are in a signal set: @comment signal.h @comment POSIX.1 @deftypefun int sigismember (const sigset_t *@var{set}, int @var{signum}) +@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}} The @code{sigismember} function tests whether the signal @var{signum} is a member of the signal set @var{set}. It returns @code{1} if the signal is in the set, @code{0} if not, and @code{-1} if there is an error. @@ -2576,6 +2632,10 @@ Instead, use @code{pthread_sigmask}. @comment signal.h @comment POSIX.1 @deftypefun int sigprocmask (int @var{how}, const sigset_t *restrict @var{set}, sigset_t *restrict @var{oldset}) +@safety{@prelim{}@mtunsafe{@mtasurace{:sigprocmask/bsd(SIG_UNBLOCK)}}@asunsafe{@asulock{/hurd}}@acunsafe{@aculock{/hurd}}} +@c This takes the hurd_self_sigstate-returned object's lock on HURD. On +@c BSD, SIG_UNBLOCK is emulated with two sigblock calls, which +@c introduces a race window. The @code{sigprocmask} function is used to examine or change the calling process's signal mask. The @var{how} argument determines how the signal mask is changed, and must be one of the following values: @@ -2759,6 +2819,10 @@ You can find out which signals are pending at any time by calling @comment signal.h @comment POSIX.1 @deftypefun int sigpending (sigset_t *@var{set}) +@safety{@prelim{}@mtsafe{}@asunsafe{@asulock{/hurd}}@acunsafe{@aculock{/hurd}}} +@c Direct rt_sigpending syscall on most systems. On hurd, calls +@c hurd_self_sigstate, it copies the sigstate's pending while holding +@c its lock. The @code{sigpending} function stores information about pending signals in @var{set}. If there is a pending signal that is blocked from delivery, then that signal is a member of the returned set. (You can @@ -2922,6 +2986,17 @@ you use it. @comment unistd.h @comment POSIX.1 @deftypefun int pause (void) +@safety{@prelim{}@mtunsafe{@mtasurace{:sigprocmask/!bsd!linux}}@asunsafe{@asulock{/hurd}}@acunsafe{@aculock{/hurd}}} +@c The signal mask read by sigprocmask may be overridden by another +@c thread or by a signal handler before we call sigsuspend. Is this a +@c safety issue? Probably not. +@c pause @mtasurace:sigprocmask/!bsd!linux @asulock/hurd @aculock/hurd +@c [ports/linux/generic] +@c syscall_pause ok +@c [posix] +@c sigemptyset dup ok +@c sigprocmask(SIG_BLOCK) dup @asulock/hurd @aculock/hurd [no @mtasurace:sigprocmask/bsd(SIG_UNBLOCK)] +@c sigsuspend dup @mtasurace:sigprocmask/!bsd!linux @asulock/hurd @aculock/hurd The @code{pause} function suspends program execution until a signal arrives whose action is either to execute a handler function, or to terminate the process. @@ -3017,6 +3092,18 @@ signals be handled by their handlers. @comment signal.h @comment POSIX.1 @deftypefun int sigsuspend (const sigset_t *@var{set}) +@safety{@prelim{}@mtunsafe{@mtasurace{:sigprocmask/!bsd!linux}}@asunsafe{@asulock{/hurd}}@acunsafe{@aculock{/hurd}}} +@c sigsuspend @mtasurace:sigprocmask/!bsd!linux @asulock/hurd @aculock/hurd +@c [posix] @mtasurace:sigprocmask/!bsd!linux +@c saving and restoring the procmask is racy +@c sigprocmask(SIG_SETMASK) dup @asulock/hurd @aculock/hurd [no @mtasurace:sigprocmask/bsd(SIG_UNBLOCK)] +@c pause @asulock/hurd @aculock/hurd +@c [bsd] +@c sigismember dup ok +@c sigmask dup ok +@c sigpause dup ok [no @mtasurace:sigprocmask/!bsd!linux @asulock/hurd @aculock/hurd] +@c [linux] +@c do_sigsuspend ok This function replaces the process's signal mask with @var{set} and then suspends the process until a signal is delivered whose action is either to terminate the process or invoke a signal handling function. In other @@ -3150,6 +3237,9 @@ delivered on the normal user stack. @comment signal.h @comment XPG @deftypefun int sigaltstack (const stack_t *restrict @var{stack}, stack_t *restrict @var{oldstack}) +@safety{@prelim{}@mtsafe{}@asunsafe{@asulock{/hurd}}@acunsafe{@aculock{/hurd}}} +@c Syscall on Linux and BSD; the HURD implementation takes a lock on +@c the hurd_self_sigstate-returned struct. The @code{sigaltstack} function specifies an alternate stack for use during signal handling. When a signal is received by the process and its action indicates that the signal stack is used, the system arranges @@ -3196,6 +3286,8 @@ This field is true if the process is currently using this stack. @comment signal.h @comment BSD @deftypefun int sigstack (struct sigstack *@var{stack}, struct sigstack *@var{oldstack}) +@safety{@prelim{}@mtsafe{}@asunsafe{@asulock{/hurd}}@acunsafe{@aculock{/hurd}}} +@c Lossy and dangerous (no size limit) wrapper for sigaltstack. The @code{sigstack} function specifies an alternate stack for use during signal handling. When a signal is received by the process and its action indicates that the signal stack is used, the system arranges a @@ -3301,6 +3393,13 @@ structure, it means to reset the action for the signal back to @comment signal.h @comment BSD @deftypefun int sigvec (int @var{signum}, const struct sigvec *@var{action}, struct sigvec *@var{old-action}) +@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}} +@c This is mostly a safe wrapper for sigaction. The exception are +@c systems that lack SA_RESETHAND, in which a signal handler wrapper is +@c used that calls sigaction to reset the handler before calling the +@c user-supplied handler; it's unlikely that this emulation is used +@c anywhere, for user-supplied flags and mask don't seem to be used +@c the way one would expect. This function is the equivalent of @code{sigaction} (@pxref{Advanced Signal Handling}); it installs the action @var{action} for the signal @var{signum}, returning information about the previous action in effect for that signal @@ -3310,6 +3409,14 @@ in @var{old-action}. @comment signal.h @comment BSD @deftypefun int siginterrupt (int @var{signum}, int @var{failflag}) +@safety{@prelim{}@mtunsafe{@mtasuconst{:@mtssigintr{}}}@asunsafe{}@acunsafe{@acucorrupt{}}} +@c This calls sigaction twice, once to get the current sigaction for the +@c specified signal, another to apply the flags change. This could +@c override the effects of a concurrent sigaction call. It also +@c modifies without any guards the global _sigintr variable, that +@c bsd_signal reads from, and it may leave _sigintr modified without +@c overriding the active handler if cancelled between the two +@c operations. This function specifies which approach to use when certain primitives are interrupted by handling signal @var{signum}. If @var{failflag} is false, signal @var{signum} restarts primitives. If @var{failflag} is @@ -3323,6 +3430,8 @@ code @code{EINTR}. @xref{Interrupted Primitives}. @comment signal.h @comment BSD @deftypefn Macro int sigmask (int @var{signum}) +@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}} +@c This just shifts signum. This macro returns a signal mask that has the bit for signal @var{signum} set. You can bitwise-OR the results of several calls to @code{sigmask} together to specify more than one signal. For example, @@ -3339,6 +3448,11 @@ specifies a mask that includes all the job-control stop signals. @comment signal.h @comment BSD @deftypefun int sigblock (int @var{mask}) +@safety{@prelim{}@mtsafe{}@asunsafe{@asulock{/hurd}}@acunsafe{@aculock{/hurd}}} +@c On most POSIX systems, this is a wrapper for sigprocmask(SIG_BLOCK). +@c The exception are BSD systems other than 4.4, where it is a syscall. +@c sigblock @asulock/hurd @aculock/hurd +@c sigprocmask(SIG_BLOCK) dup @asulock/hurd @aculock/hurd [no @mtasurace:sigprocmask/bsd(SIG_UNBLOCK)] This function is equivalent to @code{sigprocmask} (@pxref{Process Signal Mask}) with a @var{how} argument of @code{SIG_BLOCK}: it adds the signals specified by @var{mask} to the calling process's set of blocked @@ -3348,6 +3462,11 @@ signals. The return value is the previous set of blocked signals. @comment signal.h @comment BSD @deftypefun int sigsetmask (int @var{mask}) +@safety{@prelim{}@mtsafe{}@asunsafe{@asulock{/hurd}}@acunsafe{@aculock{/hurd}}} +@c On most POSIX systems, this is a wrapper for sigprocmask(SIG_SETMASK). +@c The exception are BSD systems other than 4.4, where it is a syscall. +@c sigsetmask @asulock/hurd @aculock/hurd +@c sigprocmask(SIG_SETMASK) dup @asulock/hurd @aculock/hurd [no @mtasurace:sigprocmask/bsd(SIG_UNBLOCK)] This function equivalent to @code{sigprocmask} (@pxref{Process Signal Mask}) with a @var{how} argument of @code{SIG_SETMASK}: it sets the calling process's signal mask to @var{mask}. The return value is @@ -3357,6 +3476,15 @@ the previous set of blocked signals. @comment signal.h @comment BSD @deftypefun int sigpause (int @var{mask}) +@safety{@prelim{}@mtunsafe{@mtasurace{:sigprocmask/!bsd!linux}}@asunsafe{@asulock{/hurd}}@acunsafe{@aculock{/hurd}}} +@c sigpause @mtasurace:sigprocmask/!bsd!linux @asulock/hurd @aculock/hurd +@c [posix] +@c __sigpause @mtasurace:sigprocmask/!bsd!linux @asulock/hurd @aculock/hurd +@c do_sigpause @mtasurace:sigprocmask/!bsd!linux @asulock/hurd @aculock/hurd +@c sigprocmask(0) dup @asulock/hurd @aculock/hurd [no @mtasurace:sigprocmask/bsd(SIG_UNBLOCK)] +@c sigdelset dup ok +@c sigset_set_old_mask dup ok +@c sigsuspend dup @mtasurace:sigprocmask/!bsd!linux @asulock/hurd @aculock/hurd This function is the equivalent of @code{sigsuspend} (@pxref{Waiting for a Signal}): it sets the calling process's signal mask to @var{mask}, and waits for a signal to arrive. On return the previous set of blocked |